CSIT-687: Directory structure reorganization

Change-Id: I772c9e214be2461adf58124998d272e7d795220f
Signed-off-by: Tibor Frank <tifrank@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>

1 files changed, 209 insertions, 0 deletions

diff --git a/tests/vpp/func/ip4_tunnels/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swirelw46-func.robot b/tests/vpp/func/ip4_tunnels/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swirelw46-func.robot
new file mode 100644
index 0000000000..378accb922
--- /dev/null
+++ b/tests/vpp/func/ip4_tunnels/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swirelw46-func.robot
@@ -0,0 +1,209 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/ip/ip4.robot
+| Resource | resources/libraries/robot/ip/ip6.robot
+| Resource | resources/libraries/robot/ip/map.robot
+| Library  | resources.libraries.python.Trace
+| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO
+| Test Setup | Set up functional test
+| Test Teardown | Tear down functional test
+| Documentation | *Lightweight 4 over 6 test cases*
+| ...
+| ... | LW4o6 is a subset of MAP-E, with per-subscriber rules. It uses the
+| ... | same tunneling mechanism and configuration as MAP-E. It does not use
+| ... | embedded address bits.
+| ...
+| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links
+| ... | between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP on TG_if1-DUT,
+| ... | Eth-IPv6-IPv4-UDP on TG_if2_DUT.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured as lwAFTR.
+| ... | *[Ver] TG verification:* Test UDP ICMP Echo Request in IPv4 are
+| ... | sent to lwAFTR and are verified by TG for correctness their
+| ... | encapsulation in IPv6 src-addr, dst-addr and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC7596 RFC7597.
+
+*** Variables ***
+| ${dut_ip4}= | 10.0.0.1
+| ${dut_ip6}= | 2001:0::1
+| ${tg_ip6}= | 2001:0::2
+| ${ipv4_prefix_len}= | 24
+| ${ipv6_prefix_len}= | 64
+
+| ${lw_ipv4_pfx}= | 20.0.0.1/32
+| ${lw_ipv6_pfx}= | 2001:1::/64
+| ${lw_ipv6_src}= | 2001:1::1
+| ${lw_psid_length}= | ${8}
+| ${lw_psid_offset}= | ${6}
+| ${lw_rule_psid}= | ${52}
+| ${lw_rule_ipv6_dst}= | 2001:1::2
+| ${lw_rule_2_psid}= | ${22}
+| ${lw_rule_2_ipv6_dst}= | 2001:1::3
+| ${test_ipv4_inside}= | 20.0.0.1
+| ${test_ipv4_outside}= | 10.0.0.100
+# test_port depends on psid, length, offset
+| ${test_port}= | ${1232}
+| ${test_icmp_id}= | ${1232}
+| ${test_2_port}= | ${6232}
+
+*** Test Cases ***
+| TC01: Encapsulate IPv4 into IPv6. IPv6 dst depends on IPv4 and UDP destination
+| | [Documentation]
+| | ... | [Top] TG=DUT1.
+| | ... | [Enc] Eth-IPv4-UDP on TG_if1-DUT, Eth-IPv6-IPv4-UDP on TG_if2_DUT.
+| | ... | [Cfg] On DUT1 configure Map domain and Map rule.
+| | ... | [Ver] Make TG send non-encapsulated UDP to DUT; verify TG received
+| | ... |       IPv4oIPv6 encapsulated packet is correct.
+| | ... | [Ref] RFC7596 RFC7597
+| | ...
+| | Given Configure path in 2-node circular topology
+| |       ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And   Set interfaces in 2-node circular topology up
+| | And   Configure IP addresses on interfaces
+| |       ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len}
+| |       ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len}
+| | And   Add IP Neighbor
+| |       ... | ${dut_node} | ${dut_to_tg_if2} | ${tg_ip6}
+| |       ... | ${tg_to_dut_if2_mac}
+| | And Vpp Route Add
+| |       ... | ${dut_node} | ${lw_rule_ipv6_dst} | 128
+| |       ... | ${tg_ip6} | ${dut_to_tg_if2} | resolve_attempts=${NONE}
+| | ${domain_index}=
+| | ... | When Map Add Domain
+| |            ... | ${dut_node} | ${lw_ipv4_pfx} | ${lw_ipv6_pfx}
+| |            ... | ${lw_ipv6_src} | 0 | ${lw_psid_offset}
+| |            ... | ${lw_psid_length}
+| |       And  Map Add Rule
+| |            ... | ${dut_node} | ${domain_index} | ${lw_rule_psid}
+| |            ... | ${lw_rule_ipv6_dst}
+| | Then Send IPv4 UDP and check headers for lightweight 4over6
+| |      ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2}
+| |      ... | ${dut_to_tg_if1_mac} | ${test_ipv4_inside} | ${test_ipv4_outside}
+| |      ... | ${test_port} | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac}
+| |      ... | ${lw_rule_ipv6_dst} | ${lw_ipv6_src}
+
+TC02: Encapsulate IPv4 ICMP into IPv6. IPv6 dst depends on IPv4 addr and ICMP ID
+| | [Documentation]
+| | ... | [Top] TG=DUT1.
+| | ... | [Enc] Eth-IPv4-ICMP(type 0 and 8) on TG_if1-DUT, Eth-IPv6-IPv4-ICMP
+| | ... |       on TG_if2_DUT.
+| | ... | [Cfg] On DUT1 configure Map domain and Map rule.
+| | ... | [Ver] Make TG send non-encapsulated ICMP to DUT; verify TG received
+| | ... |       IPv4oIPv6 encapsulated packet is correct. Checks IPv6
+| | ... |       destination based on ICMP Identifier field.
+| | ... | [Ref] RFC7596 section 8.1
+| | ...
+| | Given Configure path in 2-node circular topology
+| |       ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And   Set interfaces in 2-node circular topology up
+| | And   Configure IP addresses on interfaces
+| |       ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len}
+| |       ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len}
+| | And   Add IP Neighbor
+| |       ... | ${dut_node} | ${dut_to_tg_if2} | ${tg_ip6}
+| |       ... | ${tg_to_dut_if2_mac}
+| | And Vpp Route Add
+| |       ... | ${dut_node} | ${lw_rule_ipv6_dst} | 128
+| |       ... | ${tg_ip6} | ${dut_to_tg_if2} | resolve_attempts=${NONE}
+| | ${domain_index}=
+| | ... | When Map Add Domain
+| |            ... | ${dut_node} | ${lw_ipv4_pfx} | ${lw_ipv6_pfx}
+| |            ... | ${lw_ipv6_src} | 0 | ${lw_psid_offset}
+| |            ... | ${lw_psid_length}
+| |       And  Map Add Rule
+| |            ... | ${dut_node} | ${domain_index} | ${lw_rule_psid}
+| |            ... | ${lw_rule_ipv6_dst}
+| | Then Send IPv4 ICMP and check headers for lightweight 4over6
+| |      ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2}
+| |      ... | ${dut_to_tg_if1_mac} | ${test_ipv4_inside} | ${test_ipv4_outside}
+| |      ... | ${test_icmp_id} | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac}
+| |      ... | ${lw_rule_ipv6_dst} | ${lw_ipv6_src}
+
+TC03: Decapsulate IPv4 UDP from IPv6.
+| | [Documentation]
+| | ... | [Top] TG=DUT1.
+| | ... | [Enc] Eth-IPv6-IPv4-UDP on TG_if2_DUT, Eth-IPv4-UDP on TG_if1-DUT.
+| | ... | [Cfg] On DUT1 configure Map domain and Map rule.
+| | ... | [Ver] Make TG send encapsulated UDP to DUT; verify TG received
+| | ... |       IPv4 non-encapsulated packet is correct.
+| | ... | [Ref] RFC7596 RFC7597
+| | ...
+| | Given Configure path in 2-node circular topology
+| |       ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And   Set interfaces in 2-node circular topology up
+| | And   Configure IP addresses on interfaces
+| |       ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len}
+| |       ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len}
+| | And   Add Arp on DUT
+| |       ... | ${dut_node} | ${dut_to_tg_if1}
+| |       ... | ${test_ipv4_outside}
+| |       ... | ${tg_to_dut_if1_mac}
+| | ${domain_index}=
+| | ... | When Map Add Domain
+| |            ... | ${dut_node} | ${lw_ipv4_pfx} | ${lw_ipv6_pfx}
+| |            ... | ${lw_ipv6_src} | 0 | ${lw_psid_offset}
+| |            ... | ${lw_psid_length}
+| |       And  Map Add Rule
+| |            ... | ${dut_node} | ${domain_index} | ${lw_rule_psid}
+| |            ... | ${lw_rule_ipv6_dst}
+| | Then Send IPv4 UDP in IPv6 and check headers for lightweight 4over6
+| |      ... | ${tg_node} | ${tg_to_dut_if2} | ${tg_to_dut_if1}
+| |      ... | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac}
+| |      ... | ${lw_ipv6_src} | ${lw_rule_ipv6_dst}
+| |      ... | ${test_ipv4_outside} | ${test_ipv4_inside} | ${test_port}
+| |      ... | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
+
+TC04: Hairpinning of traffic between two lwB4
+| | [Documentation]
+| | ... | [Top] DUT1-TG.
+| | ... | [Enc] Eth-IPv6-IPv4-UDP on TG_if2_DUT, Eth-IPv6-IPv4-UDP on TG_if2_DUT.
+| | ... | [Cfg] On DUT1 configure Map domain and two Map rules.
+| | ... | [Ver] Make TG send encapsulated UDP to DUT; verify TG received
+| | ... |       encapsulated packet is correct.
+| | ... | [Ref] RFC7596 RFC7597
+| | ...
+| | Given Configure path in 2-node circular topology
+| |       ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And   Set interfaces in 2-node circular topology up
+| | And   Configure IP addresses on interfaces
+| |       ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len}
+| |       ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len}
+| | And   Add IP Neighbor
+| |       ... | ${dut_node} | ${dut_to_tg_if2} | ${tg_ip6}
+| |       ... | ${tg_to_dut_if2_mac}
+| | And Vpp Route Add
+| |       ... | ${dut_node} | ${lw_rule_2_ipv6_dst} | 128
+| |       ... | ${tg_ip6} | ${dut_to_tg_if2} | resolve_attempts=${NONE}
+| | ${domain_index}=
+| | ... | When Map Add Domain
+| |            ... | ${dut_node} | ${lw_ipv4_pfx} | ${lw_ipv6_pfx}
+| |            ... | ${lw_ipv6_src} | 0 | ${lw_psid_offset}
+| |            ... | ${lw_psid_length}
+| |       And  Map Add Rule
+| |            ... | ${dut_node} | ${domain_index} | ${lw_rule_psid}
+| |            ... | ${lw_rule_ipv6_dst}
+| |       And  Map Add Rule
+| |            ... | ${dut_node} | ${domain_index} | ${lw_rule_2_psid}
+| |            ... | ${lw_rule_2_ipv6_dst}
+| | Then Send IPv4 UDP in IPv6 and check headers for lightweight hairpinning
+| |      ... | ${tg_node} | ${tg_to_dut_if2} | ${tg_to_dut_if2}
+| |      ... | ${dut_to_tg_if2_mac}
+| |      ... | ${lw_ipv6_src} | ${lw_rule_ipv6_dst}
+| |      ... | ${test_ipv4_inside} | ${test_ipv4_inside}
+| |      ... | ${test_2_port} | ${test_port}
+| |      ... | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac}
+| |      ... | ${lw_rule_2_ipv6_dst} | ${lw_ipv6_src}