Remove un-interested VIRL tests and related resources

Change-Id: I712f5dc238fdf480c7c35250148c12d03ed96d74
Signed-off-by: Jan Gelety <jgelety@cisco.com>

1 files changed, 0 insertions, 490 deletions

diff --git a/tests/vpp/func/ip4_tunnels/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swiremape-func.robot b/tests/vpp/func/ip4_tunnels/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swiremape-func.robot
deleted file mode 100644
index 47f88ff347..0000000000
--- a/tests/vpp/func/ip4_tunnels/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swiremape-func.robot
+++ /dev/null
@@ -1,490 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-*** Settings ***
-| Library  | resources.libraries.python.IPUtil
-| Library  | resources.libraries.python.Trace
-| ...
-| Resource | resources/libraries/robot/ip/ip4.robot
-| Resource | resources/libraries/robot/ip/ip6.robot
-| Resource | resources/libraries/robot/ip/map.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| ...
-| Variables | resources/test_data/softwire/map_e_domains.py | ${5}
-| ...
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO | SKIP_VPP_PATCH
-| ... | SOFTWIRE
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down functional test
-| ...
-| Documentation | *Test for Basic mapping rule for MAP-E*\
-| ... | *[Top] Network Topologies:* TG - DUT1 - TG with two links between the
-| ... | nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP on TG-to-DUT-if1.
-| ... | Eth-IPv6-IPv4-UDP on TG-to-DUT-if2.
-| ... | *[Cfg] DUT configuration:* DUT is configured with IPv4 on one DUT-to-TG
-| ... | interface and IPv6 address on second DUT-to-TG interface. MAP-E domain
-| ... | is configured in test template based on test parameters.
-| ... | *[Ver] TG verification:* UDP packets in IPv4 are sent by TG to
-| ... | destination in MAP domain. IPv6 packets with encapsulated IPv4 are
-| ... | received on TG interface.
-| ... | *[Ref] Applicable standard specifications:* RFC7597.
-
-
-*** Variables ***
-| ${dut_ip4}= | 10.0.0.1
-| ${dut_ip6}= | 2001:0::1
-| ${dut_ip4_gw}= | 10.0.0.2
-| ${dut_ip6_gw}= | 2001:0::2
-| ${ipv4_prefix_len}= | 24
-| ${ipv6_prefix_len}= | 64
-| ${ipv6_br_src}= | 2001:db8:ffff::1
-| ${ipv4_outside}= | 1.0.0.1
-
-
-*** Test Cases ***
-| TC01: BMR, then an IPv4 prefix is assigned
-| | [Documentation]
-| | ... | Basic Mapping Rule https://tools.ietf.org/html/rfc7597#section-5.2\
-| | ... | IPv4 prefix length + ea bits length < 32 (o + r < 32)
-| | ... | psid_length = 0, ip6_prefix < 64, ip4_prefix <= 32
-| | ...
-| | ... | Arguments:
-| | ...
-| | ... | - ipv4_pfx
-| | ... | - ipv6_pfx
-| | ... | - ipv6_src
-| | ... | - ea_bit_len
-| | ... | - psid_offset
-| | ... | - psid_len
-| | ... | - ipv4_dst
-| | ... | - dst_port
-| | ... | - expected_ipv6_dst
-| | ...
-# TODO: replace setup when VPP-312 fixed
-#| | [Setup] | Set Interfaces IP Addresses And Routes
-| | [Setup] | Run Keywords
-| | ... | Set up functional test | AND
-| | ... | Set Interfaces IP Addresses And Routes
-| | [Template] | Check MAP Configuration With Traffic Script
-# |=================|===============|================|============|=============|==========|================|==========|==================================|
-# | ipv4_pfx        | ipv6_pfx      | ipv6_src       | ea_bit_len | psid_offset | psid_len | ipv4_dst       | dst_port | expected_ipv6_dst                |
-# |=================|===============|================|============|=============|==========|================|==========|==================================|
-| | 20.0.0.0/8      | 2001:db8::/32 | ${ipv6_br_src} | ${4}       | ${0}        | ${0}     | 20.169.201.219 | ${1232}  | 2001:db8:a000::14a0:0:0          |
-| | 20.0.0.0/8      | 2001:db8::/32 | ${ipv6_br_src} | ${8}       | ${0}        | ${0}     | 20.169.201.219 | ${1232}  | 2001:db8:a900::14a9:0:0          |
-| | 20.0.0.0/8      | 2001:db8::/32 | ${ipv6_br_src} | ${10}      | ${0}        | ${0}     | 20.169.201.219 | ${1232}  | 2001:db8:a9c0::14a9:c000:0       |
-| | 20.0.0.0/8      | 2001:db8::/32 | ${ipv6_br_src} | ${16}      | ${0}        | ${0}     | 20.169.201.219 | ${1232}  | 2001:db8:a9c9::14a9:c900:0       |
-| | 20.0.0.0/8      | 2001:db8::/32 | ${ipv6_br_src} | ${20}      | ${0}        | ${0}     | 20.169.201.219 | ${1232}  | 2001:db8:a9c9:d000:0:14a9:c9d0:0 |
-| | 20.0.0.0/8      | 2001:db8::/32 | ${ipv6_br_src} | ${23}      | ${0}        | ${0}     | 20.169.201.219 | ${1232}  | 2001:db8:a9c9:da00:0:14a9:c9da:0 |
-| | 20.169.201.0/24 | 2001:db8::/32 | ${ipv6_br_src} | ${4}       | ${0}        | ${0}     | 20.169.201.219 | ${1232}  | 2001:db8:d000::14a9:c9d0:0       |
-| | 20.169.201.0/24 | 2001:db8::/32 | ${ipv6_br_src} | ${7}       | ${0}        | ${0}     | 20.169.201.219 | ${1232}  | 2001:db8:da00::14a9:c9da:0       |
-
-
-| TC02: BMR, full IPv4 address is to be assigned
-| | [Documentation]
-| | ... | Basic Mapping Rule https://tools.ietf.org/html/rfc7597#section-5.2\
-| | ... | IPv4 prefix length + ea bits length == 32 (o + r == 32)
-| | ... | psid_length = 0, ip6_prefix < 64, ip4_prefix <= 32
-| | ...
-| | ... | Arguments:
-| | ...
-| | ... | - ipv4_pfx
-| | ... | - ipv6_pfx
-| | ... | - ipv6_src
-| | ... | - ea_bit_len
-| | ... | - psid_offset
-| | ... | - psid_len
-| | ... | - ipv4_dst
-| | ... | - dst_port
-| | ... | - expected_ipv6_dst
-| | ...
-# TODO: replace setup when VPP-312 fixed
-#| | [Setup] | Set Interfaces IP Addresses And Routes
-| | [Setup] | Run Keywords
-| | ... | Set up functional test | AND
-| | ... | Set Interfaces IP Addresses And Routes
-| | [Template] | Check MAP Configuration With Traffic Script
-# |===================|===============|================|============|=============|==========|================|==========|==================================|
-# | ipv4_pfx          | ipv6_pfx      | ipv6_src       | ea_bit_len | psid_offset | psid_len | ipv4_dst       | dst_port | expected_ipv6_dst                |
-# |===================|===============|================|============|=============|==========|================|==========|==================================|
-| | 20.0.0.0/8        | 2001:db8::/32 | ${ipv6_br_src} | ${24}      | ${0}        | ${0}     | 20.169.201.219 | ${1232}  | 2001:db8:a9c9:db00:0:14a9:c9db:0 |
-| | 20.160.0.0/12     | 2001:db8::/32 | ${ipv6_br_src} | ${20}      | ${0}        | ${0}     | 20.169.201.219 | ${1232}  | 2001:db8:9c9d:b000:0:14a9:c9db:0 |
-| | 20.169.0.0/16     | 2001:db8::/32 | ${ipv6_br_src} | ${16}      | ${0}        | ${0}     | 20.169.201.219 | ${1232}  | 2001:db8:c9db::14a9:c9db:0       |
-| | 20.169.200.0/22   | 2001:db8::/32 | ${ipv6_br_src} | ${10}      | ${0}        | ${0}     | 20.169.201.219 | ${1232}  | 2001:db8:76c0::14a9:c9db:0       |
-| | 20.169.201.0/24   | 2001:db8::/32 | ${ipv6_br_src} | ${8}       | ${0}        | ${0}     | 20.169.201.219 | ${1232}  | 2001:db8:db00::14a9:c9db:0       |
-| | 20.169.201.208/28 | 2001:db8::/32 | ${ipv6_br_src} | ${4}       | ${0}        | ${0}     | 20.169.201.219 | ${1232}  | 2001:db8:b000::14a9:c9db:0       |
-| | 20.169.201.219/32 | 2001:db8::/32 | ${ipv6_br_src} | ${0}       | ${0}        | ${0}     | 20.169.201.219 | ${1232}  | 2001:db8::14a9:c9db:0            |
-| | 20.0.0.0/8        | 2001:db8::/40 | ${ipv6_br_src} | ${24}      | ${0}        | ${0}     | 20.169.201.219 | ${1232}  | 2001:db8:a9:c9db:0:14a9:c9db:0   |
-| | 20.160.0.0/12     | 2001:db8::/44 | ${ipv6_br_src} | ${20}      | ${0}        | ${0}     | 20.169.201.219 | ${1232}  | 2001:db8:9:c9db:0:14a9:c9db:0    |
-| | 20.169.0.0/16     | 2001:db8::/48 | ${ipv6_br_src} | ${16}      | ${0}        | ${0}     | 20.169.201.219 | ${1232}  | 2001:db8:0:c9db:0:14a9:c9db:0    |
-| | 20.169.200.0/22   | 2001:db8::/54 | ${ipv6_br_src} | ${10}      | ${0}        | ${0}     | 20.169.201.219 | ${1232}  | 2001:db8:0:1db:0:14a9:c9db:0     |
-
-
-| TC03: BMR, shared IPv4 address is to be assigned
-| | [Documentation]
-| | ... | Basic Mapping Rule https://tools.ietf.org/html/rfc7597#section-5.2\
-| | ... | IPv4 prefix length + ea bits length > 32 (o + r > 32)
-| | ... | ip6_prefix < 64, ip4_prefix <= 32
-| | ...
-| | ... | Arguments:
-| | ...
-| | ... | - ipv4_pfx
-| | ... | - ipv6_pfx
-| | ... | - ipv6_src
-| | ... | - ea_bit_len
-| | ... | - psid_offset
-| | ... | - psid_len
-| | ... | - ipv4_dst
-| | ... | - dst_port
-| | ... | - expected_ipv6_dst
-| | ...
-# TODO: replace setup when VPP-312 fixed
-#| | [Setup] | Set Interfaces IP Addresses And Routes
-| | [Setup] | Run Keywords
-| | ... | Set up functional test | AND
-| | ... | Set Interfaces IP Addresses And Routes
-| | [Template] | Check MAP Configuration With Traffic Script
-# |===================|===============|================|============|=============|==========|================|==========|===================================|
-# | ipv4_pfx          | ipv6_pfx      | ipv6_src       | ea_bit_len | psid_offset | psid_len | ipv4_dst       | dst_port | expected_ipv6_dst                 |
-# |===================|===============|================|============|=============|==========|================|==========|===================================|
-| | 20.0.0.0/8        | 2001::/16     | ${ipv6_br_src} | ${48}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  | 2001:a9c9:db34::14a9:c9db:34      |
-| | 20.169.0.0/16     | 2001::/16     | ${ipv6_br_src} | ${48}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  | 2001:c9db:3400::14a9:c9db:34      |
-| | 20.169.201.0/24   | 2001::/16     | ${ipv6_br_src} | ${48}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  | 2001:db34::14a9:c9db:34           |
-| | 20.169.201.219/32 | 2001::/16     | ${ipv6_br_src} | ${48}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  | 2001:3400::14a9:c9db:34           |
-
-| | 20.0.0.0/8        | 2001::/24     | ${ipv6_br_src} | ${40}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  | 2001:a9:c9db:3400:0:14a9:c9db:34  |
-| | 20.169.0.0/16     | 2001::/24     | ${ipv6_br_src} | ${40}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  | 2001:c9:db34::14a9:c9db:34        |
-| | 20.169.201.0/24   | 2001::/24     | ${ipv6_br_src} | ${40}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  | 2001:db:3400::14a9:c9db:34        |
-| | 20.169.201.219/32 | 2001::/24     | ${ipv6_br_src} | ${40}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  | 2001:34::14a9:c9db:34             |
-| | 20.169.0.0/16     | 2001::/16     | ${ipv6_br_src} | ${40}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  | 2001:c9db:3400::14a9:c9db:34      |
-| | 20.169.201.219/32 | 2001::/16     | ${ipv6_br_src} | ${40}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  | 2001:3400::14a9:c9db:34           |
-
-| | 20.0.0.0/8        | 2001:db8::/32 | ${ipv6_br_src} | ${32}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  | 2001:db8:a9c9:db34:0:14a9:c9db:34 |
-| | 20.169.0.0/16     | 2001:db8::/32 | ${ipv6_br_src} | ${32}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  | 2001:db8:c9db:3400:0:14a9:c9db:34 |
-| | 20.169.201.0/24   | 2001:db8::/32 | ${ipv6_br_src} | ${32}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  | 2001:db8:db34::14a9:c9db:34       |
-| | 20.169.201.219/32 | 2001:db8::/32 | ${ipv6_br_src} | ${32}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  | 2001:db8:3400::14a9:c9db:34       |
-| | 20.169.0.0/16     | 2001::/24     | ${ipv6_br_src} | ${32}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  | 2001:c9:db34::14a9:c9db:34        |
-| | 20.169.201.0/24   | 2001::/24     | ${ipv6_br_src} | ${32}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  | 2001:db:3400::14a9:c9db:34        |
-| | 20.169.0.0/16     | 2001::/16     | ${ipv6_br_src} | ${32}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  | 2001:c9db:3400::14a9:c9db:34      |
-| | 20.169.201.0/24   | 2001::/16     | ${ipv6_br_src} | ${32}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  | 2001:db34::14a9:c9db:34           |
-
-| | 20.160.0.0/12     | 2001:db8::/32 | ${ipv6_br_src} | ${25}      | ${6}        | ${5}     | 20.169.201.219 | ${1232}  | 2001:db8:9c9d:b300:0:14a9:c9db:6  |
-| | 20.169.0.0/16     | 2001:db8::/32 | ${ipv6_br_src} | ${25}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  | 2001:db8:c9db:3400:0:14a9:c9db:34 |
-| | 20.169.201.0/24   | 2001:db8::/32 | ${ipv6_br_src} | ${25}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  | 2001:db8:db34::14a9:c9db:34       |
-| | 20.169.201.219/32 | 2001:db8::/32 | ${ipv6_br_src} | ${25}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  | 2001:db8:3400::14a9:c9db:34       |
-
-| | 20.169.192.0/20   | 2001:db8::/32 | ${ipv6_br_src} | ${17}      | ${6}        | ${5}     | 20.169.201.219 | ${1232}  | 2001:db8:9db3::14a9:c9db:6        |
-| | 20.169.201.0/24   | 2001:db8::/32 | ${ipv6_br_src} | ${17}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  | 2001:db8:db34::14a9:c9db:34       |
-| | 20.169.201.219/32 | 2001:db8::/32 | ${ipv6_br_src} | ${17}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  | 2001:db8:3400::14a9:c9db:34       |
-
-| | 20.169.201.0/24   | 2001:db8::/32 | ${ipv6_br_src} | ${12}      | ${6}        | ${4}     | 20.169.201.219 | ${1232}  | 2001:db8:db30::14a9:c9db:3        |
-| | 20.169.201.219/32 | 2001:db8::/32 | ${ipv6_br_src} | ${12}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  | 2001:db8:3400::14a9:c9db:34       |
-
-
-| TC04: End user IPv6 prefix is 64
-| | [Documentation]
-| | ... | Supported End-User IPv6 prefix length is 64 bit.
-| | ...
-| | ... | Arguments:
-| | ...
-| | ... | - ipv4_pfx
-| | ... | - ipv6_pfx
-| | ... | - ipv6_src
-| | ... | - ea_bit_len
-| | ... | - psid_offset
-| | ... | - psid_len
-| | ... | - ipv4_dst
-| | ... | - dst_port
-| | ...
-# TODO: replace setup when VPP-312 fixed
-#| | [Setup] | Set Interfaces IP Addresses And Routes
-| | [Setup] | Run Keywords
-| | ... | Set up functional test | AND
-| | ... | Set Interfaces IP Addresses And Routes
-| | [Template] | Check MAP Configuration With Traffic Script
-# |===================|=========================|================|============|=============|==========|================|==========|
-# | ipv4_pfx          | ipv6_pfx                | ipv6_src       | ea_bit_len | psid_offset | psid_len | ipv4_dst       | dst_port |
-# |===================|=========================|================|============|=============|==========|================|==========|
-| | 20.0.0.0/8        | 2001:db8:0012:3400::/56 | ${ipv6_br_src} | ${8}       | ${0}        | ${0}     | 20.169.201.219 | ${1232}  |
-| | 20.169.201.208/28 | 2001:db8:0012:3400::/56 | ${ipv6_br_src} | ${8}       | ${5}        | ${4}     | 20.169.201.219 | ${3280}  |
-| | 20.0.0.0/8        | 2001:db8:0012:3400::/64 | ${ipv6_br_src} | ${0}       | ${0}        | ${0}     | 20.169.201.219 | ${1232}  |
-| | 20.169.201.219/32 | 2001:db8:0012:3400::/64 | ${ipv6_br_src} | ${0}       | ${0}        | ${0}     | 20.169.201.219 | ${1232}  |
-
-
-| TC05: IPv4 prefix is 0
-| | [Tags] | EXPECTED_FAILING
-# TODO: replace setup when VPP-312 fixed
-#| | [Setup] | Set Interfaces IP Addresses And Routes
-| | [Setup] | Run Keywords
-| | ... | Set up functional test | AND
-| | ... | Set Interfaces IP Addresses And Routes
-| | [Template] | Check MAP Configuration With Traffic Script
-# |===================|=========================|================|============|=============|==========|================|==========|
-# | ipv4_pfx          | ipv6_pfx                | ipv6_src       | ea_bit_len | psid_offset | psid_len | ipv4_dst       | dst_port |
-# |===================|=========================|================|============|=============|==========|================|==========|
-| | 0.0.0.0/0         | 2001:db8:0000::/40      | ${ipv6_br_src} | ${8}       | ${0}        | ${0}     | 20.169.201.219 | ${1232}  |
-| | 0.0.0.0/0         | 2001:db8:0000::/40      | ${ipv6_br_src} | ${16}      | ${0}        | ${0}     | 20.169.201.219 | ${1232}  |
-| | 0.0.0.0/0         | 2001:db8::/32           | ${ipv6_br_src} | ${32}      | ${0}        | ${0}     | 20.169.201.219 | ${1232}  |
-| | 0.0.0.0/0         | 2001:d00::/24           | ${ipv6_br_src} | ${40}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  |
-| | 0.0.0.0/0         | 2001::/16               | ${ipv6_br_src} | ${40}      | ${6}        | ${8}     | 20.169.201.219 | ${1232}  |
-
-
-| TC06: Multiple domain and check with traffic script IPv4 source IPv6 destination
-| | [Documentation]
-| | ... | [Top] TG=DUT1.
-| | ... | [Cfg] Multiple MAP-E domains are configured, values from variable\
-| | ... | file.
-| | ... | [Ver] Send IPv4 to destination in configured domain and receive IPv6\
-| | ... | packet.
-| | ... | [Ref] RFC7597.
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Set interfaces in 2-node circular topology up
-| | And Configure IP addresses on interfaces
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len}
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len}
-| | And Vpp Route Add | ${dut_node} | :: | 0 | gateway=${dut_ip6_gw}
-| | ... | interface=${dut_to_tg_if2}
-| | And VPP Add IP Neighbor
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6_gw} | ${tg_to_dut_if2_mac}
-| | And Vpp Route Add | ${dut_node} | 0.0.0.0 | 0 | gateway=${dut_ip4_gw}
-| | ... | interface=${dut_to_tg_if1}
-| | And VPP Add IP Neighbor
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4_gw} | ${tg_to_dut_if1_mac}
-| | :FOR | ${domain_set} | IN | @{domain_sets}
-| | | When Map Add Domain | ${dut_node} | @{domain_set}
-| | :FOR | ${ip_set} | IN | @{ip_sets}
-| | | ${ipv4}= | Get From List | ${ip_set} | 0
-| | | ${ipv6}= | Get From List | ${ip_set} | 1
-| | | ${port}= | Get From List | ${ip_set} | 2
-| | | ${ipv6_br}= | Get From List | ${ip_set} | 3
-| | | Then Send IPv4 UDP And Check Headers For Lightweight 4over6
-| | | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2}
-| | | ... | ${dut_to_tg_if1_mac} | ${ipv4} | ${ipv4_outside} | ${port}
-| | | ... | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} | ${ipv6} | ${ipv6_br}
-| | | And Send IPv4 UDP In IPv6 And Check Headers For Lightweight 4over6
-| | | ... | ${tg_node} | ${tg_to_dut_if2} | ${tg_to_dut_if1}
-| | | ... | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac} | ${ipv6_br} | ${ipv6}
-| | | ... | ${ipv4_outside} | ${ipv4} | ${port} | ${tg_to_dut_if1_mac}
-| | | ... | ${dut_to_tg_if1_mac}
-
-
-| TC07: Multiple domain and check with traffic script IPv6 source IPv6 destination
-| | [Documentation]
-| | ... | [Top] TG=DUT1.
-| | ... | [Cfg] Multiple MAP-E domains are configured, values from variable\
-| | ... | file.
-| | ... | [Ver] Send IPv4 encapsulated in IPv6. Source and destination are from\
-| | ... | configured domains. Check if VPP translate IPv6 addresses.
-| | ... | [Ref] RFC7597.
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Set interfaces in 2-node circular topology up
-| | And Configure IP addresses on interfaces
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len}
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len}
-| | And Vpp Route Add | ${dut_node} | :: | 0 | gateway=${dut_ip6_gw}
-| | ... | interface=${dut_to_tg_if2}
-| | And VPP Add IP Neighbor
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6_gw} | ${tg_to_dut_if2_mac}
-| | And Vpp Route Add | ${dut_node} | 0.0.0.0 | 0 | gateway=${dut_ip4_gw}
-| | ... | interface=${dut_to_tg_if1}
-| | And VPP Add IP Neighbor
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4_gw} | ${tg_to_dut_if1_mac}
-| | :FOR | ${domain_set} | IN | @{domain_sets}
-| | | When Map Add Domain | ${dut_node} | @{domain_set}
-| | ${ip_set_A}= | Get From List | ${ip_sets} | 0
-| | ${ip_set_B}= | Get From List | ${ip_sets} | 1
-| | ${ipv6_br}= | Get From List | ${ip_set_A} | 3
-| | ${port_A}= | Get From List | ${ip_set_A} | 2
-| | ${port_B}= | Get From List | ${ip_set_B} | 2
-| | ${ipv6_A}= | Get From List | ${ip_set_A} | 1
-| | ${ipv6_B}= | Get From List | ${ip_set_B} | 1
-| | ${ipv4_A}= | Get From List | ${ip_set_A} | 0
-| | ${ipv4_B}= | Get From List | ${ip_set_B} | 0
-| | Then Send IPv4 UDP In IPv6 And Check Headers For Lightweight Hairpinning
-| | ... | ${tg_node} | ${tg_to_dut_if2}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac}
-| | ... | ${ipv6_br} | ${ipv6_A}
-| | ... | ${ipv4_B} | ${ipv4_A}
-| | ... | ${port_B} | ${port_A}
-| | ... | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac}
-| | ... | ${ipv6_B} | ${ipv6_br}
-
-
-| TC08: Encapsulate IPv4 ICMP into IPv6
-| | [Documentation]
-| | ... | [Top] TG=DUT1.
-| | ... | [Enc] Eth-IPv4-ICMP(type 0 and 8) on TG_if1-DUT, Eth-IPv6-IPv4-ICMP\
-| | ... | on TG_if2_DUT.
-| | ... | [Cfg] Multiple MAP-E domains are configured, values from variable\
-| | ... | file.
-| | ... | [Ver] Make TG send non-encapsulated ICMP to DUT; verify TG received\
-| | ... | IPv4oIPv6 encapsulated packet is correct. Checks IPv6 destination\
-| | ... | based on ICMP Identifier field.
-| | ... | [Ref] RFC7597 section 8.2.
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Set interfaces in 2-node circular topology up
-| | And Configure IP addresses on interfaces
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len}
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len}
-| | And Vpp Route Add | ${dut_node} | :: | 0 | gateway=${dut_ip6_gw}
-| | ... | interface=${dut_to_tg_if2}
-| | And VPP Add IP Neighbor
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6_gw} | ${tg_to_dut_if2_mac}
-| | And Vpp Route Add | ${dut_node} | 0.0.0.0 | 0 | gateway=${dut_ip4_gw}
-| | ... | interface=${dut_to_tg_if1}
-| | And VPP Add IP Neighbor
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4_gw} | ${tg_to_dut_if1_mac}
-| | :FOR | ${domain_set} | IN | @{domain_sets}
-| | | When Map Add Domain | ${dut_node} | @{domain_set}
-| | ${ip_set_A}= | Get From List | ${ip_sets} | 0
-| | ${ipv4_A}= | Get From List | ${ip_set_A} | 0
-| | ${ipv6_A}= | Get From List | ${ip_set_A} | 1
-| | ${icmp_id_A}= | Get From List | ${ip_set_A} | 2
-| | ${ipv6_br}= | Get From List | ${ip_set_A} | 3
-| | Then Send IPv4 ICMP And Check Headers For Lightweight 4over6
-| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2}
-| | ... | ${dut_to_tg_if1_mac} | ${ipv4_A} | ${ipv4_outside}
-| | ... | ${icmp_id_A} | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac}
-| | ... | ${ipv6_A} | ${ipv6_br}
-
-
-| TC09: Repeated ip neighbor command doesnt put FIB to broken state
-| | [Documentation] |
-| | ... | Original issue described in https://jira.fd.io/browse/VPP-312.
-| | ... | [Top] TG=DUT1.
-| | ... | [Cfg] IP address are set on interfaces, ip neighbor multiple times
-| | ... | [Ver] FIB is not in broken state. The steps are add route, \
-| | ... | check with traffic then add same route
-| | ... | again and check with traffic script.
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Set interfaces in 2-node circular topology up
-| | When Configure IP addresses on interfaces
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len}
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len}
-| | And Vpp Route Add | ${dut_node} | 2001:: | 16 | gateway=${dut_ip6_gw}
-| | ... | interface=${dut_to_tg_if2}
-| | And VPP Add IP Neighbor
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6_gw} | ${tg_to_dut_if2_mac}
-| | And Vpp Route Add | ${dut_node} | 0.0.0.0 | 0 | gateway=${dut_ip4_gw}
-| | ... | interface=${dut_to_tg_if1}
-| | And VPP Add IP Neighbor
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4_gw} | ${tg_to_dut_if1_mac}
-| | Then Check MAP Configuration With Traffic Script
-| | ... | 20.0.0.0/8 | 2001::/16 | ${ipv6_br_src} | ${48} | ${6} | ${8}
-| | ... | 20.169.201.219 | ${1232} | 2001:a9c9:db34::14a9:c9db:34
-| | When Configure IP addresses on interfaces
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len}
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len}
-| | And Vpp Route Add | ${dut_node} | 2001:: | 16 | gateway=${dut_ip6_gw}
-| | ... | interface=${dut_to_tg_if2}
-| | And VPP Add IP Neighbor
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6_gw} | ${tg_to_dut_if2_mac}
-| | And Vpp Route Add | ${dut_node} | 0.0.0.0 | 0 | gateway=${dut_ip4_gw}
-| | ... | interface=${dut_to_tg_if1}
-| | And VPP Add IP Neighbor
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4_gw} | ${tg_to_dut_if1_mac}
-| | Then Check MAP Configuration With Traffic Script
-| | ... | 20.0.0.0/8 | 2001::/16 | ${ipv6_br_src} | ${48} | ${6} | ${8}
-| | ... | 20.169.201.219 | ${1232} | 2001:a9c9:db34::14a9:c9db:34
-
-
-| Bug: VPP-318
-| | [Tags] | EXPECTED_FAILING
-| | [Documentation] | qlen < psid length
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Set interfaces in 2-node circular topology up
-| | And Configure IP addresses on interfaces
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len}
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len}
-| | Then Run Keyword And Expect Error | Unable to add map domain *
-| | ... | Map Add Domain | ${dut_node} | 20.169.0.0/16 | 2001:db8::/32
-| | ... | ${ipv6_br_src} | ${20} | ${6} | ${8}
-
-
-*** Keywords ***
-| Set Interfaces IP Addresses And Routes
-| | Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | Set interfaces in 2-node circular topology up
-| | Configure IP addresses on interfaces
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len}
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len}
-| | Vpp Route Add | ${dut_node} | :: | 0 | gateway=${dut_ip6_gw}
-| | ... | interface=${dut_to_tg_if2}
-| | VPP Add IP Neighbor
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6_gw} | ${tg_to_dut_if2_mac}
-| | Vpp Route Add | ${dut_node} | ${ipv4_outside} | 32 | gateway=${dut_ip4_gw}
-| | ... | interface=${dut_to_tg_if1}
-| | VPP Add IP Neighbor
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4_gw} | ${tg_to_dut_if1_mac}
-
-| Check MAP Configuration With Traffic Script
-| | [Documentation]
-| | ... | Used as a test case template.\
-| | ... | Configure MAP-E domain with given parameters, with traffic script send
-| | ... | UDP in IPv4 packet to given UDP destination port and IP destination
-| | ... | address and check if correctly received IPv6 packet. Vice versa send
-| | ... | IPv6 packet and check if received IPv4 packet with correct source
-| | ... | address.
-| | ... | The MAP domain is deleted in teardown.
-| | ... | The expected IPv6 address is compared with computed IPv6 address.
-| | [Arguments] | ${ipv4_pfx} | ${ipv6_pfx} | ${ipv6_br_src} | ${ea_bit_len}
-| | ... | ${psid_offset} | ${psid_len} | ${ipv4_dst} | ${dst_port}
-| | ... | ${expected_ipv6_dst}=${EMPTY}
-| | ${domain_index}= | Map Add Domain | ${dut_node} | ${ipv4_pfx} | ${ipv6_pfx}
-| | ... | ${ipv6_br_src} | ${ea_bit_len} | ${psid_offset} | ${psid_len}
-| | ${computed_ipv6_dst}= | Compute IPv6 Map Destination Address
-| | ... | ${ipv4_pfx} | ${ipv6_pfx} | ${ea_bit_len} | ${psid_offset}
-| | ... | ${psid_len} | ${ipv4_dst} | ${dst_port}
-| | ${ipv6_dst}= | Run Keyword If | "${expected_ipv6_dst}" == "${EMPTY}"
-| | ... | Set Variable | ${computed_ipv6_dst}
-| | ... | ELSE | Set Variable | ${expected_ipv6_dst}
-| | Run Keyword If | "${expected_ipv6_dst}" != "${EMPTY}"
-| | ... | IP Addresses Should Be Equal
-| | ... | ${computed_ipv6_dst} | ${expected_ipv6_dst}
-| | ${ipv6_dst}= | Set Variable | ${computed_ipv6_dst}
-| | Check Encapsulation With Traffic Script
-| | ... | ${ipv4_dst} | ${dst_port} | ${ipv6_dst}
-| | Check Decapsulation With Traffic Script
-| | ... | ${ipv6_dst} | ${ipv4_dst} | ${dst_port}
-| | [Teardown] | Run Keywords
-| | ... | Map Del Domain | ${dut_node} | ${domain_index} | AND
-| | ... | Show Packet Trace On All DUTs | ${nodes} | AND
-| | ... | Clear Packet Trace On All DUTs | ${nodes} | AND
-| | ... | Verify VPP PID in Teardown
-
-| Check Encapsulation With Traffic Script
-| | [Arguments] | ${ipv4_dst} | ${dst_port} | ${ipv6_dst}
-| | Send IPv4 UDP And Check Headers For Lightweight 4over6
-| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2}
-| | ... | ${dut_to_tg_if1_mac} | ${ipv4_dst} | ${ipv4_outside}
-| | ... | ${dst_port} | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac}
-| | ... | ${ipv6_dst} | ${ipv6_br_src}
-
-| Check Decapsulation With Traffic Script
-| | [Arguments] | ${ipv6_ce_addr} | ${ipv4_inside} | ${port}
-| | Send IPv4 UDP In IPv6 And Check Headers For Lightweight 4over6
-| | ... | ${tg_node} | ${tg_to_dut_if2} | ${tg_to_dut_if1}
-| | ... | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac}
-| | ... | ${ipv6_br_src} | ${ipv6_ce_addr}
-| | ... | ${ipv4_outside} | ${ipv4_inside} | ${port}
-| | ... | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}