CSIT-687: Directory structure reorganization

Change-Id: I772c9e214be2461adf58124998d272e7d795220f
Signed-off-by: Tibor Frank <tifrank@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>

1 files changed, 66 insertions, 0 deletions

diff --git a/tests/vpp/func/ip4_tunnels/vxlan/eth2p-ethip4vxlan-l2xcbase-func.robot b/tests/vpp/func/ip4_tunnels/vxlan/eth2p-ethip4vxlan-l2xcbase-func.robot
new file mode 100644
index 0000000000..aa88be5731
--- /dev/null
+++ b/tests/vpp/func/ip4_tunnels/vxlan/eth2p-ethip4vxlan-l2xcbase-func.robot
@@ -0,0 +1,66 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/overlay/vxlan.robot
+| Resource | resources/libraries/robot/l2/l2_traffic.robot
+| Resource | resources/libraries/robot/l2/l2_xconnect.robot
+| Library  | resources.libraries.python.Trace
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV
+| Test Setup | Set up functional test
+| Test Teardown | Tear down functional test
+| Documentation | *RFC7348 VXLAN: L2 cross-connect with VXLAN test cases*
+| ...
+| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on
+| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
+| ... | cross-connect (L2XC) switching; VXLAN tunnels are configured between
+| ... | L2XCs on DUT1 and DUT2.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets
+| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive
+| ... | TG verifies packets for correctness and their IPv4 src-addr, dst-addr
+| ... | and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC7348.
+
+*** Variables ***
+| ${VNI}= | 24
+
+*** Test Cases ***
+| TC01: DUT1 and DUT2 with L2XC and VXLANoIPv4 tunnels switch ICMPv4 between TG links
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \
+| | ... | [Ref] RFC7348.DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On
+| | ... | DUT1 and DUT2 configure L2 cross-connect (L2XC), each with one
+| | ... | interface to TG and one VXLAN tunnel interface towards the other
+| | ... | DUT. [Ver] Make TG send ICMPv4 Echo Req between two of its
+| | ... | interfaces; verify all packets are received. [Ref] RFC7348.
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | ${dut1_to_dut2_name}= | Get interface name | ${dut1_node} | ${dut1_to_dut2}
+| | ${dut2_to_dut1_name}= | Get interface name | ${dut2_node} | ${dut2_to_dut1}
+| | And Configure IP addresses and neighbors on interfaces
+| | ... | ${dut1_node} | ${dut1_to_dut2_name} | ${NONE}
+| | ... | ${dut2_node} | ${dut2_to_dut1_name} | ${NONE}
+| | ${dut1s_vxlan}= | When Create VXLAN interface | ${dut1_node} | ${VNI}
+| | | ... | ${dut1s_ip_address} | ${dut2s_ip_address}
+| | And Configure L2XC | ${dut1_node} | ${dut1_to_tg} | ${dut1s_vxlan}
+| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${VNI}
+| | | ... | ${dut2s_ip_address} | ${dut1s_ip_address}
+| | And Configure L2XC | ${dut2_node} | ${dut2_to_tg} | ${dut2s_vxlan}
+| | Then Send ICMPv4 bidirectionally and verify received packets
+| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}