Remove selected VIRL tests

- These are not going to be converted to vpp_device

Change-Id: I0148be014fee476f3dc1a72c51316aace0f2350f
Signed-off-by: Peter Mikus <pmikus@cisco.com>

2 files changed, 0 insertions, 193 deletions

diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ecmp-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ecmp-func.robot
deleted file mode 100644
index b970d37aef..0000000000
--- a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ecmp-func.robot
+++ /dev/null
@@ -1,81 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.IPUtil
-| Library | resources.libraries.python.Trace
-| ...
-| Resource | resources/libraries/robot/ip/ip6.robot
-| Resource | resources/libraries/robot/shared/counters.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| ...
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO | SKIP_VPP_PATCH
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down functional test
-| ...
-| Documentation | *Ipv6 Multipath routing test cases*
-| ...
-| ... | *[Top] Network topologies:* TG=DUT 2-node topology with two links\
-| ... | between nodes.
-| ... | *[Cfg] DUT configuration:* On DUT configure interfaces IPv4 adresses,\
-| ... | and multipath routing.
-| ... | *[Ver] TG verification:* Test packets are sent from TG on the first\
-| ... | link to DUT. Packet is received on TG on the second link from DUT1.
-
-*** Variables ***
-| ${ip_1}= | 3ffe:61::1
-| ${ip_2}= | 3ffe:62::1
-| ${test_dst_ip}= | 3ffe:71::1
-| ${test_src_ip}= | 3ffe:51::1
-| ${prefix_length}= | 64
-| ${neighbor_1_ip}= | 3ffe:62::2
-| ${neighbor_1_mac}= | 02:00:00:00:00:02
-| ${neighbor_2_ip}= | 3ffe:62::3
-| ${neighbor_2_mac}= | 02:00:00:00:00:03
-
-*** Test Cases ***
-| TC01: IPv6 Equal-cost multipath routing
-| | [Documentation]
-| | ... | [Top] TG=DUT
-| | ... | [Cfg] On DUT configure multipath routing wiht two equal-cost paths.
-| | ... | [Ver] TG sends 100 IPv6 ICMP packets traffic on the first link to\
-| | ... | DUT. On second link to TG verify if traffic is divided into two paths.
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Set interfaces in 2-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${ip_1} | ${prefix_length}
-| | And VPP Interface Set IP Address
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${ip_2} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${neighbor_1_ip} | ${neighbor_1_mac}
-| | And VPP Add IP Neighbor
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${neighbor_2_ip} | ${neighbor_2_mac}
-| | And Suppress ICMPv6 router advertisement message | ${nodes}
-| | When Vpp Route Add
-| | ... | ${dut_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${neighbor_1_ip} | interface=${dut_to_tg_if1}
-| | ... | multipath=${TRUE}
-| | And Vpp Route Add
-| | ... | ${dut_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${neighbor_2_ip} | interface=${dut_to_tg_if1}
-| | ... | multipath=${TRUE}
-| | Then Send packets and verify multipath routing
-| | ... | ${tg_node} | ${tg_to_dut_if2} | ${tg_to_dut_if1} | ${test_src_ip}
-| | ... | ${test_dst_ip} | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac}
-| | ... | ${dut_to_tg_if1_mac} | ${neighbor_1_mac} | ${neighbor_2_mac}
diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ra-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ra-func.robot
deleted file mode 100644
index 267faac50f..0000000000
--- a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ra-func.robot
+++ /dev/null
@@ -1,112 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.Trace
-| ...
-| Resource | resources/libraries/robot/ip/ip6.robot
-| Resource | resources/libraries/robot/shared/counters.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| ...
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | SKIP_VPP_PATCH
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down functional test
-| ...
-| Documentation | *IPv6 Router Advertisement test cases*
-| ...
-| ... | RFC4861 Neighbor Discovery. Encapsulations: Eth-IPv6-RA on links
-| ... | TG-DUT1. IPv6 Router Advertisement tests use 3-node topology TG - DUT1 -
-| ... | DUT2 - TG with one link between the nodes. DUT1 and DUT2 are configured
-| ... | with IPv6 routing and static routes. TG verifies received RA packets.
-
-
-*** Variables ***
-| ${dut1_to_tg_ip}= | 3ffe:62::1
-| ${tg_to_dut1_ip}= | 3ffe:62::2
-| ${prefix_length}= | 64
-| ${interval}= | 2
-
-*** Test Cases ***
-| TC01: DUT transmits RA on IPv6 enabled interface
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG.
-| | ... | [Ver] Make TG wait for IPv6 Router Advertisement packet to be sent\
-| | ... | by DUT1 and verify the received RA packet is correct.
-| | [Tags] | EXPECTED_FAILING
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | When Vpp RA Send After Interval | ${dut1_node} | ${dut1_to_tg}
-| | Then Receive and verify router advertisement packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${dut1_to_tg_mac}
-
-| TC02: DUT retransmits RA on IPv6 enabled interface after a set interval
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG.
-| | ... | [Ver] Make TG wait for two IPv6 Router Advertisement packets\
-| | ... | to be sent by DUT1 and verify the received RA packets are correct.
-| | [Tags] | EXPECTED_FAILING
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | When Vpp RA Send After Interval | ${dut1_node} | ${dut1_to_tg}
-| | ... | interval=${interval}
-| | :FOR | ${n} | IN RANGE | ${2}
-| | | Then Receive and verify router advertisement packet
-| | | ... | ${tg_node} | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${interval}
-
-| TC03: DUT responds to Router Solicitation request
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG and suppress\
-| | ... | sending of Router Advertisement packets periodically.
-| | ... | [Ver] Make TG send IPv6 Router Solicitation request to DUT1, listen\
-| | ... | for response from DUT1 and verify the received RA packet is correct.
-| | [Tags] | EXPECTED_FAILING
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | When VPP RA Suppress Link Layer | ${dut1_node} | ${dut1_to_tg}
-| | Then Send router solicitation and verify response
-| | ... | ${tg_node} | ${dut1_node} | ${tg_to_dut1} | ${dut1_to_tg}
-| | ... | ${tg_to_dut1_ip}
-
-| TC04: DUT responds to Router Solicitation request sent from link local address
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG and suppress\
-| | ... | sending of Router Advertisement packets periodically.
-| | ... | [Ver] Make TG send IPv6 Router Solicitation request to DUT1, listen\
-| | ... | for response from DUT1 and verify the received RA packet is correct.
-| | [Tags] | EXPECTED_FAILING
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | When VPP RA Suppress Link Layer | ${dut1_node} | ${dut1_to_tg}
-| | Then Send router solicitation and verify response
-| | ... | ${tg_node} | ${dut1_node} | ${tg_to_dut1} | ${dut1_to_tg}