CSIT-687: Directory structure reorganization

Change-Id: I772c9e214be2461adf58124998d272e7d795220f
Signed-off-by: Tibor Frank <tifrank@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>

1 files changed, 96 insertions, 0 deletions

diff --git a/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lisp-l2bdbasemaclrn-func.robot b/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lisp-l2bdbasemaclrn-func.robot
new file mode 100644
index 0000000000..6927dacde4
--- /dev/null
+++ b/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lisp-l2bdbasemaclrn-func.robot
@@ -0,0 +1,96 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.topology.Topology
+| Library | resources.libraries.python.NodePath
+| Library | resources.libraries.python.Trace
+| Library | resources.libraries.python.IPUtil
+| Library | resources.libraries.python.LispUtil
+| Library | resources.libraries.python.L2Util
+| Resource | resources/libraries/robot/shared/traffic.robot
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/interfaces.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/ip/ip4.robot
+| Resource | resources/libraries/robot/overlay/l2lisp.robot
+# Import configuration and test data:
+| Variables | resources/test_data/lisp/l2/l2_ipv6.py
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP
+| ...
+| Test Setup | Set up functional test
+| ...
+| Test Teardown | Tear down functional test
+| ...
+| Documentation | *l2-lispgpe-ip6 encapsulation test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IP6-ICMPv6-LISPGpe-IP6
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge\
+| ... | domains and neighbors. LISPoIPv6 tunnel is configured between\
+| ... | DUT1 and DUT2.
+| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in\
+| ... | both directions by TG on links to DUT1 and DUT2; on receive\
+| ... | TG verifies packets for correctness and their IPv6 src-addr, dst-addr\
+| ... | and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC6830.
+
+*** Test Cases ***
+| TC01: Route IPv6 packet through LISP with Bridge Domain setup.
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG.
+| | ... | [Enc] Eth-IP6-ICMPv6-LISPGpe-IP6
+| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2. Also\
+| | ... | configure BD and assign it to LISP VNI.
+| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across both\
+| | ... | DUTs and LISP tunnel between them; verify IPv6, Ether headers on\
+| | ... | received packets are correct.
+| | ... | [Ref] RFC6830.
+| | ...
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | And Configure IP addresses on interfaces
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} | ${prefix6}
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} | ${prefix6}
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} | ${prefix6}
+| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} | ${prefix6}
+| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6}
+| | ... | ${tg_to_dut2_mac}
+| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6}
+| | ... | ${tg_to_dut1_mac}
+| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6}
+| | ... | ${dut2_to_dut1_mac}
+| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6}
+| | ... | ${dut1_to_dut2_mac}
+| | And Vpp All RA Suppress Link Layer | ${nodes}
+| | When Create L2 BD | ${dut1_node} | ${vpp_bd_id}
+| | And Add Interface To L2 BD | ${dut1_node} | ${dut1_to_tg} | ${vpp_bd_id}
+| | And Create L2 BD | ${dut2_node} | ${vpp_bd_id}
+| | And Add Interface To L2 BD | ${dut2_node} | ${dut2_to_tg} | ${vpp_bd_id}
+| | And Configure L2 LISP on DUT | ${dut1_node}
+| | ... | ${dut1_to_dut2_ip6_static_adjacency}
+| | ... | ${lisp_dut_settings}
+| | And Configure L2 LISP on DUT | ${dut2_node}
+| | ... | ${dut2_to_dut1_ip6_static_adjacency}
+| | ... | ${lisp_dut_settings}
+| | Then Send packet and verify headers
+| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6}
+| | ... | ${tg_to_dut1} | ${tg_if1_mac} | ${tg_if2_mac}
+| | ... | ${tg_to_dut2} | ${tg_if1_mac} | ${tg_if2_mac}
+| | And Send packet and verify headers
+| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6}
+| | ... | ${tg_to_dut2} | ${tg_if2_mac} | ${tg_if1_mac}
+| | ... | ${tg_to_dut1} | ${tg_if2_mac} | ${tg_if1_mac}