CSIT-687: Directory structure reorganization

Change-Id: I772c9e214be2461adf58124998d272e7d795220f
Signed-off-by: Tibor Frank <tifrank@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>

1 files changed, 108 insertions, 0 deletions

diff --git a/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-func.robot b/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-func.robot
new file mode 100644
index 0000000000..08fc5c76c6
--- /dev/null
+++ b/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-func.robot
@@ -0,0 +1,108 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/ip/ip4.robot
+| Resource | resources/libraries/robot/shared/traffic.robot
+| Resource | resources/libraries/robot/overlay/lisp_static_adjacency.robot
+| Resource | resources/libraries/robot/l2/l2_traffic.robot
+| Library  | resources.libraries.python.IPUtil
+| Library  | resources.libraries.python.Trace
+# import additional Lisp settings from resource file
+| Variables | resources/test_data/lisp/static_adjacency/lisp_static_adjacency.py
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO
+| ... | VM_ENV | HW_ENV
+| ...
+| Test Setup | Set up functional test
+| ...
+| Test Teardown | Tear down functional test
+| ...
+| Documentation | *LISP static adjacency test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv4-ICMPv4 on\
+| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv6\
+| ... | tunnel.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
+| ... | routing and static routes. LISPoIPv6 tunnel is configured\
+| ... | between DUT1 and DUT2.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets\
+| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive\
+| ... | TG verifies packets for correctness and their IPv4 src-addr,\
+| ... | dst-addr and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC6830.
+
+*** Test Cases ***
+| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISPoIPv6 tunnel
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG.
+| | ... | [Enc] Eth-IPv6-LISP-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\
+| | ... | TG-DUTn.
+| | ... | [Cfg] On DUT1 and DUT2 configure IPv6 LISP static adjacencies.
+| | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces across both\
+| | ... | DUTs and LISP tunnel between them; verify IPv4 headers on received\
+| | ... | packets are correct.
+| | ... | [Cfg2] Reconf LISP.
+| | ... | [Ver2] Verify packets are received again via LISP tunnel.
+| | ... | [Ref] RFC6830.
+| | ...
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | And Configure IP addresses on interfaces
+| | ... | ${dut1_node} | ${dut1_to_dut2}
+| | ... | ${dut1_to_dut2_ip4o6} | ${dut_prefix4o6}
+| | ... | ${dut1_node} | ${dut1_to_tg}
+| | ... | ${dut1_to_tg_ip4o6} | ${tg_prefix4o6}
+| | ... | ${dut2_node} | ${dut2_to_dut1}
+| | ... | ${dut2_to_dut1_ip4o6} | ${dut_prefix4o6}
+| | ... | ${dut2_node} | ${dut2_to_tg}
+| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6}
+| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4o6}
+| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4o6}
+| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4o6}
+| | ... | ${tg_to_dut2_mac}
+| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4o6}
+| | ... | ${tg_to_dut1_mac}
+| | And Vpp All RA Suppress Link Layer | ${nodes}
+| | When Configure LISP topology in 3-node circular topology
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
+| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
+| | Then Send packet and verify headers
+| | ... | ${tg_node} | ${tg1_ip4o6} | ${tg2_ip4o6}
+| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
+| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
+| | And Send packet and verify headers
+| | ... | ${tg_node} | ${tg2_ip4o6} | ${tg1_ip4o6}
+| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
+| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
+| | When Change LISP Configuration | ${dut1_node} | ${dut2_node}
+| | ... | ${dut1_to_dut2} | ${dut2_to_dut1} | ${dut1_to_dut2_mac}
+| | ... | ${dut2_to_dut1_mac} | ${dut1_to_dut2_ip4o6}
+| | ... | ${dut2_to_dut1_ip4o6_reconf} | ${dut_prefix4o6}
+| | ... | ${dut1_ip4o6_static_adjacency}
+| | ... | ${dut1_ip4o6_static_adjacency_reconf}
+| | Then Send packet and verify headers
+| | ... | ${tg_node} | ${tg1_ip4o6} | ${tg2_ip4o6}
+| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
+| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
+| | And Send packet and verify headers
+| | ... | ${tg_node} | ${tg2_ip4o6} | ${tg1_ip4o6}
+| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
+| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}