Remove redundant VIRL test

Change-Id: I368f4e07d578802973a1c5f6b15e170038d63238
Signed-off-by: Peter Mikus <pmikus@cisco.com>

1 files changed, 0 insertions, 74 deletions

diff --git a/tests/vpp/func/l2xc/eth2p-eth-l2xcbase-func.robot b/tests/vpp/func/l2xc/eth2p-eth-l2xcbase-func.robot
deleted file mode 100644
index 37ccfc47cf..0000000000
--- a/tests/vpp/func/l2xc/eth2p-eth-l2xcbase-func.robot
+++ /dev/null
@@ -1,74 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/l2/l2_xconnect.robot
-| Resource | resources/libraries/robot/l2/l2_traffic.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot
-| Resource | resources/libraries/robot/vm/qemu.robot
-| Library  | resources.libraries.python.Trace
-| Library | resources.libraries.python.NodePath
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV | SKIP_VPP_PATCH
-| Test Setup | Set up functional test
-| Test Teardown | Tear down functional test
-| Documentation | *L2 cross-connect test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of IPv4;
-| ... | Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply to all links.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
-| ... | cross-connect (L2XC) switching.
-| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets are
-| ... | sent in both directions by TG on links to DUT1 and DUT2; on receive TG
-| ... | verifies packets for correctness and their IPv4 (IPv6) src-addr,
-| ... | dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:*
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 with L2XC switch ICMPv4 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and \
-| | ... | DUT2 configure L2 cross-connect (L2XC), each with one interface
-| | ... | to TG and one Ethernet interface towards the other DUT. [Ver]
-| | ... | Make TG send ICMPv4 Echo Req in both directions between two of
-| | ... | its interfaces to be switched by DUT1 and DUT2; verify all
-| | ... | packets are received. [Ref]
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Configure L2XC | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_dut2}
-| | And Configure L2XC | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | When All Vpp Interfaces Ready Wait | ${nodes}
-| | Then Send ICMPv4 bidirectionally and verify received packets
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-
-| TC02: DUT1 and DUT2 with L2XC switch ICMPv6 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 and \
-| | ... | DUT2 configure L2 cross-connect (L2XC), each with one interface
-| | ... | to TG and one Ethernet interface towards the other DUT. [Ver]
-| | ... | Make TG send ICMPv6 Echo Req in both directions between two of
-| | ... | its interfaces to be switched by DUT1 and DUT2; verify all
-| | ... | packets are received. [Ref]
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Configure L2XC | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_dut2}
-| | And Configure L2XC | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | When All Vpp Interfaces Ready Wait | ${nodes}
-| | Then Send ICMPv6 bidirectionally and verify received packets
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}