diff options
author | 2019-06-07 13:44:52 +0000 | |
---|---|---|
committer | 2019-06-10 17:38:11 +0000 | |
commit | f49a6734523f7e4ae26e357e4bd2c2df8c3de4d8 (patch) | |
tree | a1e629e4b63243f72a06a4493eec19c45aa8030f /tests/vpp/func/vm_vhost/ip4/eth2p-ethip4ipsectptlispgpe-ip4base-eth-2vhost-1vm-func.robot | |
parent | 2c6e0991f266b1cc08fe69ab4ff051e11b0c1afc (diff) |
vpp_device: IPsec
- Remove VM ipsec tests as they are not interesting
- Remove duplicate (vpp_device/virl) VM tests
- Remove VM tunnel tests and use base tunnel (we do not need tunnel and VM)
Change-Id: I5d7b6d8a037878f81a6bdc0114af481b32141dde
Signed-off-by: Peter Mikus <pmikus@cisco.com>
Diffstat (limited to 'tests/vpp/func/vm_vhost/ip4/eth2p-ethip4ipsectptlispgpe-ip4base-eth-2vhost-1vm-func.robot')
-rw-r--r-- | tests/vpp/func/vm_vhost/ip4/eth2p-ethip4ipsectptlispgpe-ip4base-eth-2vhost-1vm-func.robot | 209 |
1 files changed, 0 insertions, 209 deletions
diff --git a/tests/vpp/func/vm_vhost/ip4/eth2p-ethip4ipsectptlispgpe-ip4base-eth-2vhost-1vm-func.robot b/tests/vpp/func/vm_vhost/ip4/eth2p-ethip4ipsectptlispgpe-ip4base-eth-2vhost-1vm-func.robot deleted file mode 100644 index d9a0c3d729..0000000000 --- a/tests/vpp/func/vm_vhost/ip4/eth2p-ethip4ipsectptlispgpe-ip4base-eth-2vhost-1vm-func.robot +++ /dev/null @@ -1,209 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.topology.Topology -| Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.LispUtil -| Library | resources.libraries.python.VhostUser -| Library | resources.libraries.python.VPPUtil -| Library | resources.libraries.python.IPsecUtil -| Resource | resources/libraries/robot/shared/traffic.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| Resource | resources/libraries/robot/overlay/lispgpe.robot -| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -| Resource | resources/libraries/robot/overlay/l2lisp.robot -# Import configuration and test data: -| Variables | resources/test_data/lisp/ipv4_ipsec_lispgpe_ipv4/ipv4_ipsec_lispgpe_ipv4.py -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP | SKIP_VPP_PATCH -| ... | EXPECTED_FAILING -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down LISP functional test with QEMU -| ... -| Documentation | *IPv4-ip4-ipsec-lispgpe-ip4 - main fib, vrf (gpe_vni-to-vrf)* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* ICMPv4-IPv4-IPSec-LISPGPE-IPv4-ICMPv4. -| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\ -| ... | IPsec is in transport mode. Tests cases are for IPsec configured both\ -| ... | on RLOC interface or lisp_gpe0 interface. -| ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1\ -| ... | via VM to DUT2 where it is forwarded to TG(if2). -| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303. - -*** Variables *** -| ${dut2_spi}= | ${1000} -| ${dut1_spi}= | ${1001} - -| ${ESP_PROTO}= | ${50} - -| ${sock1}= | /tmp/sock1 -| ${sock2}= | /tmp/sock2 - -| ${bid}= | 10 - -*** Test Cases *** -| TC01: DUT1 and DUT2 route IPv4 over Vhost to LISP GPE tunnel using IPsec (transport) on RLOC Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv4-ICMP on DUT1-DUT2, Eth-IPv4-ICMP\ -| | ... | on TG-DUTn. -| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. Create Qemu vm on DUT1 and configure bridge\ -| | ... | between two vhosts. -| | ... | [Ver] Case: ip4-ipsec-lispgpe-ip4 - main fib, virt2lisp\ -| | ... | Make TG send ICMPv4 Echo Req between its interfaces across\ -| | ... | both DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup 3-node Topology -| | And Add IP Neighbors -| | And Setup Qemu DUT1 -| | And Configure LISP GPE topology in 3-node circular topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_to_dut2_ip4_static_adjacency} -| | ... | ${dut2_to_dut1_ip4_static_adjacency} -| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} -| | And Configure manual keyed connection for IPSec -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC02: DUT1 and DUT2 route IPv4 over Vhost to LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2,\ -| | ... | Eth-IPv4-ICMPv4 on TG-DUTn. -| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. -| | ... | [Ver] Case: ip4-ipsec-lispgpe-ip4 - main fib, virt2lisp\ -| | ... | Make TG send ICMPv4 Echo Req between its interfaces across\ -| | ... | both DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup 3-node Topology -| | And Add IP Neighbors -| | And Setup Qemu DUT1 -| | And Configure LISP GPE topology in 3-node circular topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_to_dut2_ip4_static_adjacency} -| | ... | ${dut2_to_dut1_ip4_static_adjacency} -| | ${lisp1_if_idx}= | resources.libraries.python.InterfaceUtil.Get Sw If Index -| | ... | ${dut1_node} | lisp_gpe0.0 -| | ${lisp2_if_idx}= | resources.libraries.python.InterfaceUtil.Get Sw If Index -| | ... | ${dut2_node} | lisp_gpe0.0 -| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut1_node} | ${lisp1_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} -| | And Configure manual keyed connection for IPSec -| | ... | ${dut2_node} | ${lisp2_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -*** Keywords *** -| Setup 3-node Topology -| | [Documentation] -| | ... | Setup 3-node topology for this test suite. Set all physical\ -| | ... | interfaces up and assing IP adresses to them.\ -| | ... | You can specify fib table ID where the DUT-TG interfaces assign to.\ -| | ... | Default is 0. -| | ... -| | [Arguments] | ${fib_table}=0 -| | Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | Set interfaces in 3-node circular topology up -| | And Add Fib Table | ${dut1_node} | ${fib_table} -| | And Add Fib Table | ${dut2_node} | ${fib_table} -| | Assign Interface To Fib Table | ${dut1_node} -| | ... | ${dut1_to_tg} | ${fib_table} -| | Assign Interface To Fib Table | ${dut2_node} -| | ... | ${dut2_to_tg} | ${fib_table} -| | Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} -| | ... | ${prefix4} -| | Set Interface Address | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} -| | ... | ${prefix4} -| | Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} -| | ... | ${prefix4} -| | Set Interface Address | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} -| | ... | ${prefix4} - -| Add IP Neighbors -| | [Documentation] -| | ... | Add IP neighbors to physical interfaces on DUTs. -| | ... -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4} -| | ... | ${tg_to_dut1_mac} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4} -| | ... | ${tg_to_dut2_mac} -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4} -| | ... | ${dut2_to_dut1_mac} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4} -| | ... | ${dut1_to_dut2_mac} - -| Setup Qemu DUT1 -| | [Documentation] | Setup Vhosts on DUT1 and setup IP to one of them. Setup \ -| | ... | Qemu and bridge the vhosts. -| | ${vhost1}= | And Vpp Create Vhost User Interface | ${dut1_node} | ${sock1} -| | ${vhost2}= | And Vpp Create Vhost User Interface | ${dut1_node} | ${sock2} -| | Set Interface Address | ${dut1_node} | ${vhost2} | 6.6.1.9 -| | ... | ${prefix4} -| | Set Interface State | ${dut1_node} | ${vhost1} | up -| | Set Interface State | ${dut1_node} | ${vhost2} | up -| | Create bridge domain | ${dut1_node} | ${bid} | learn=${TRUE} -| | Add interface to bridge domain | ${dut1_node} -| | ... | ${dut1_to_tg} | ${bid} | 0 -| | Add interface to bridge domain | ${dut1_node} -| | ... | ${vhost1} | ${bid} | 0 -| | ${vhost_mac}= | Get Vhost User Mac By SW Index | ${dut1_node} | ${vhost2} -| | Set test variable | ${dst_vhost_mac} | ${vhost_mac} -| | Configure VM for vhost L2BD forwarding | ${dut1_node} | ${sock1} | ${sock2} |