CSIT-687: Directory structure reorganization

Change-Id: I772c9e214be2461adf58124998d272e7d795220f
Signed-off-by: Tibor Frank <tifrank@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>

1 files changed, 131 insertions, 0 deletions

diff --git a/tests/vpp/func/vm_vhost/ip6/eth2p-ethip6lispgpe-ip6base-eth-2vhost-1vm-func.robot b/tests/vpp/func/vm_vhost/ip6/eth2p-ethip6lispgpe-ip6base-eth-2vhost-1vm-func.robot
new file mode 100644
index 0000000000..073792618d
--- /dev/null
+++ b/tests/vpp/func/vm_vhost/ip6/eth2p-ethip6lispgpe-ip6base-eth-2vhost-1vm-func.robot
@@ -0,0 +1,131 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.topology.Topology
+| Library | resources.libraries.python.NodePath
+| Library | resources.libraries.python.Trace
+| Library | resources.libraries.python.IPUtil
+| Library | resources.libraries.python.IPv6Setup
+| Library | resources.libraries.python.VPPUtil
+| Resource | resources/libraries/robot/shared/traffic.robot
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/interfaces.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/vm/qemu.robot
+| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot
+| Resource | resources/libraries/robot/vrf.robot
+| Resource | resources/libraries/robot/overlay/lispgpe.robot
+# Import configuration and test data:
+| Variables | resources/test_data/lisp/ipv6_lispgpe_ipv6/ipv6_lispgpe_ipv6.py
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP
+| ...
+| Test Setup | Run Keywords | Set up functional test
+| ... | AND | Vpp All Ra Suppress Link Layer | ${nodes}
+| ...
+| Test Teardown | Tear down LISP functional test with QEMU | ${vm_node}
+| ...
+| Documentation | *ip6-lispgpe-ip6 encapsulation test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv6-ICMPv6 on DUT1-DUT2,\
+| ... | Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
+| ... | routing and static routes. LISPoIPv6 tunnel is configured between\
+| ... | DUT1 and DUT2.
+| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in\
+| ... | both directions by TG on links to DUT1 and DUT2; on receive\
+| ... | TG verifies packets for correctness and their IPv6 src-addr, dst-addr\
+| ... | and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC6830.
+
+*** Test Cases ***
+| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using vhost interfaces
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG.
+| | ... | [Enc] Eth-IPv6-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\
+| | ... | TG-DUTn.
+| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2.
+| | ... | [Ver] Case: ip6-ipsec-lispgpe-ip6 - main fib, virt2lisp
+| | ... | Make TG send ICMPv6 Echo Req between its interfaces across both\
+| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\
+| | ... | received packets are correct.
+| | ...
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | And Vpp Set If IPv6 Addr
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} | ${prefix6}
+| | And Vpp Set If IPv6 Addr
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} | ${prefix6}
+| | And Vpp Set If IPv6 Addr
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} | ${prefix6}
+| | And Vpp Set If IPv6 Addr
+| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} | ${prefix6}
+| | And Add IP Neighbors
+| | And Vpp All RA Suppress Link Layer | ${nodes}
+| | When Configure LISP GPE topology in 3-node circular topology
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
+| | ... | ${dut1_to_dut2_ip6_static_adjacency}
+| | ... | ${dut2_to_dut1_ip6_static_adjacency}
+| | And Setup Qemu DUT1
+| | Then Send packet and verify headers
+| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6}
+| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac}
+| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
+| | And Send packet and verify headers
+| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6}
+| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
+| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
+
+*** Keywords ***
+| Setup Qemu DUT1
+| | [Documentation] | Setup Vhosts on DUT1 and setup IP on one of them. Setup\
+| | ... | Qemu and bridge the vhosts. Optionally, you can set fib table ID\
+| | ... | where the vhost2 interface should be assigned to.
+| | ...
+| | [Arguments] | ${fib_table}=0
+| | ...
+| | ${vhost1}= | Vpp Create Vhost User Interface | ${dut1_node} | ${sock1}
+| | ${vhost2}= | Vpp Create Vhost User Interface | ${dut1_node} | ${sock2}
+| | Assign Interface To Fib Table | ${dut1_node}
+| | ... | ${vhost2} | ${fib_table} | ipv6=${TRUE}
+| | Vpp Set If IPv6 Addr | ${dut1_node} | ${vhost2} | ${vhost_ip}
+| | ... | ${prefix6}
+| | Set Interface State | ${dut1_node} | ${vhost1} | up
+| | Set Interface State | ${dut1_node} | ${vhost2} | up
+| | Create bridge domain | ${dut1_node} | ${bid} | learn=${TRUE}
+| | Add interface to bridge domain | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${bid} | 0
+| | Add interface to bridge domain | ${dut1_node}
+| | ... | ${vhost1} | ${bid} | 0
+| | ${vhost_mac}= | Get Vhost User Mac By SW Index | ${dut1_node} | ${vhost2}
+| | Set test variable | ${dst_vhost_mac} | ${vhost_mac}
+| | Configure VM for vhost L2BD forwarding | ${dut1_node} | ${sock1} | ${sock2}
+
+| Add IP Neighbors
+| | [Documentation]
+| | ... | Add IP neighbors to physical interfaces on DUTs.
+| | ...
+| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6}
+| | ... | ${tg_to_dut1_mac}
+| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6}
+| | ... | ${tg_to_dut2_mac}
+| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6}
+| | ... | ${dut2_to_dut1_mac}
+| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6}
+| | ... | ${dut1_to_dut2_mac}