aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/func
diff options
context:
space:
mode:
authorPeter Mikus <pmikus@cisco.com>2019-07-11 09:36:44 +0000
committerPeter Mikus <pmikus@cisco.com>2019-07-12 13:20:21 +0000
commit1f2723170ac74555aa505ab3cb772ded76501362 (patch)
tree49000b6b1d1a7f6b6ef5d1efb778de8792fabf0f /tests/vpp/func
parent33fb34665214bbbd0a4b3154169b21c2da01f69b (diff)
VPPD: Cop, iACL, Policer
- Alignment with PERF Change-Id: Id7b2cb91c88e44cf9265c3376330f6aa579abf7a Signed-off-by: Peter Mikus <pmikus@cisco.com>
Diffstat (limited to 'tests/vpp/func')
-rw-r--r--tests/vpp/func/ip4/eth2p-ethip4-ip4base-copblklistbase-func.robot94
-rw-r--r--tests/vpp/func/ip4/eth2p-ethip4-ip4base-copwhlistbase-func.robot96
-rw-r--r--tests/vpp/func/ip4/eth2p-ethip4-ip4base-iaclbase-func.robot193
-rw-r--r--tests/vpp/func/ip4/eth2p-ethip4-ip4base-ipolicemarkbase-func.robot162
-rw-r--r--tests/vpp/func/ip6/eth2p-ethip6-ip6base-copblklistbase-func.robot103
-rw-r--r--tests/vpp/func/ip6/eth2p-ethip6-ip6base-copwhlistbase-func.robot105
-rw-r--r--tests/vpp/func/ip6/eth2p-ethip6-ip6base-iaclbase-func.robot200
-rw-r--r--tests/vpp/func/ip6/eth2p-ethip6-ip6base-ipolicemarkbase-func.robot161
-rw-r--r--tests/vpp/func/l2xc/eth2p-eth-l2xcbase-iaclbase-func.robot143
9 files changed, 0 insertions, 1257 deletions
diff --git a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-copblklistbase-func.robot b/tests/vpp/func/ip4/eth2p-ethip4-ip4base-copblklistbase-func.robot
deleted file mode 100644
index ef84aa21b0..0000000000
--- a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-copblklistbase-func.robot
+++ /dev/null
@@ -1,94 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.Cop
-| Library | resources.libraries.python.Trace
-| ...
-| Resource | resources/libraries/robot/ip/ip4.robot
-| Resource | resources/libraries/robot/l2/l2_xconnect.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| ...
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down functional test
-| ...
-| Documentation | *COP Security IPv4 Blacklist Tests*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 on all links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and
-| ... | static routes. COP security black-lists are applied on DUT1 ingress
-| ... | interface from TG. DUT2 is configured with L2XC.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in
-| ... | one direction by TG on link to DUT1; on receive TG verifies packets for
-| ... | correctness and drops as applicable.
-| ... | *[Ref] Applicable standard specifications:*
-
-*** Variables ***
-| ${tg_node}= | ${nodes['TG']}
-| ${dut1_node}= | ${nodes['DUT1']}
-| ${dut2_node}= | ${nodes['DUT2']}
-
-| ${dut1_if1_ip}= | 192.168.1.1
-| ${dut1_if2_ip}= | 192.168.2.1
-| ${dut1_if1_ip_GW}= | 192.168.1.2
-| ${dut1_if2_ip_GW}= | 192.168.2.2
-
-| ${test_dst_ip}= | 32.0.0.1
-| ${test_src_ip}= | 16.0.0.1
-
-| ${cop_dut_ip}= | 16.0.0.0
-
-| ${ip_prefix}= | 24
-
-| ${fib_table_number}= | 1
-
-*** Test Cases ***
-| TC01: DUT drops IPv4 pkts with COP blacklist set with IPv4 src-addr
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 \
-| | ... | configure interface IPv4 addresses and routes in the main
-| | ... | routing domain, add COP blacklist on interface to TG with IPv4
-| | ... | src-addr matching packets generated by TG; on DUT2 configure L2
-| | ... | xconnect. [Ver] Make TG send ICMPv4 Echo Req on its interface to
-| | ... | DUT1; verify no ICMPv4 Echo Req pkts are received. [Ref]
-| | Given Configure path in 3-node circular topology
-| | ... | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node}
-| | And Set interfaces in 3-node circular topology up
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip} | ${ip_prefix}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip} | ${ip_prefix}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip_GW} | ${tg_to_dut1_mac}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip_GW} | ${tg_to_dut2_mac}
-| | And Vpp Route Add | ${dut1_node} | ${test_dst_ip} | ${ip_prefix}
-| | ... | gateway=${dut1_if2_ip_GW} | interface=${dut1_to_dut2}
-| | And Add fib table | ${dut1_node} | ${fib_table_number}
-| | When COP Add whitelist Entry
-| | ... | ${dut1_node} | ${dut1_to_tg} | ip4 | ${fib_table_number}
-| | And COP interface enable or disable | ${dut1_node} | ${dut1_to_tg} | enable
-| | Then Packet transmission from port to port should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac}
-| | ... | ${tg_to_dut2_mac}
diff --git a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-copwhlistbase-func.robot b/tests/vpp/func/ip4/eth2p-ethip4-ip4base-copwhlistbase-func.robot
deleted file mode 100644
index 5fcc74f94a..0000000000
--- a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-copwhlistbase-func.robot
+++ /dev/null
@@ -1,96 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.Cop
-| Library | resources.libraries.python.Trace
-| ...
-| Resource | resources/libraries/robot/ip/ip4.robot
-| Resource | resources/libraries/robot/l2/l2_xconnect.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| ...
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down functional test
-| ...
-| Documentation | *COP Security IPv4 Whitelist Tests*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 on all links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and
-| ... | static routes. COP security white-lists are applied on DUT1 ingress
-| ... | interface from TG. DUT2 is configured with L2XC.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in
-| ... | one direction by TG on link to DUT1; on receive TG verifies packets for
-| ... | correctness and drops as applicable.
-| ... | *[Ref] Applicable standard specifications:*
-
-*** Variables ***
-| ${tg_node}= | ${nodes['TG']}
-| ${dut1_node}= | ${nodes['DUT1']}
-| ${dut2_node}= | ${nodes['DUT2']}
-
-| ${dut1_if1_ip}= | 192.168.1.1
-| ${dut1_if2_ip}= | 192.168.2.1
-| ${dut1_if1_ip_GW}= | 192.168.1.2
-| ${dut1_if2_ip_GW}= | 192.168.2.2
-
-| ${test_dst_ip}= | 32.0.0.1
-| ${test_src_ip}= | 16.0.0.1
-
-| ${cop_dut_ip}= | 16.0.0.0
-
-| ${ip_prefix}= | 24
-
-| ${fib_table_number}= | 1
-
-*** Test Cases ***
-| TC01: DUT permits IPv4 pkts with COP whitelist set with IPv4 src-addr
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 \
-| | ... | configure interface IPv4 addresses and routes in the main
-| | ... | routing domain, add COP whitelist on interface to TG with IPv4
-| | ... | src-addr matching packets generated by TG; on DUT2 configure L2
-| | ... | xconnect. [Ver] Make TG send ICMPv4 Echo Req on its interface to
-| | ... | DUT1; verify received ICMPv4 Echo Req pkts are correct. [Ref]
-| | Given Configure path in 3-node circular topology
-| | ... | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node}
-| | And Set interfaces in 3-node circular topology up
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip} | ${ip_prefix}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip} | ${ip_prefix}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip_GW} | ${tg_to_dut1_mac}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip_GW} | ${tg_to_dut2_mac}
-| | And Vpp Route Add | ${dut1_node} | ${test_dst_ip} | ${ip_prefix}
-| | ... | gateway=${dut1_if2_ip_GW} | interface=${dut1_to_dut2}
-| | And Add fib table | ${dut1_node} | ${fib_table_number}
-| | And Vpp Route Add | ${dut1_node} | ${cop_dut_ip} | ${ip_prefix}
-| | ... | vrf=${fib_table_number} | local=${TRUE}
-| | When COP Add whitelist Entry
-| | ... | ${dut1_node} | ${dut1_to_tg} | ip4 | ${fib_table_number}
-| | And COP interface enable or disable | ${dut1_node} | ${dut1_to_tg} | enable
-| | Then Send packet and verify headers | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac}
-| | ... | ${tg_to_dut2_mac}
diff --git a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-iaclbase-func.robot b/tests/vpp/func/ip4/eth2p-ethip4-ip4base-iaclbase-func.robot
deleted file mode 100644
index b8528f36d1..0000000000
--- a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-iaclbase-func.robot
+++ /dev/null
@@ -1,193 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.Classify.Classify
-| Library | resources.libraries.python.Trace
-| ...
-| Resource | resources/libraries/robot/ip/ip4.robot
-| Resource | resources/libraries/robot/l2/l2_traffic.robot
-| Resource | resources/libraries/robot/l2/l2_xconnect.robot
-| Resource | resources/libraries/robot/shared/counters.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| ...
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | SKIP_VPP_PATCH
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down functional test
-| ...
-| Documentation | *IPv4 routing with ingress ACL test cases*
-| ...
-| ... | Encapsulations: Eth-IPv4 on links TG-DUT1, TG-DUT2, DUT1-DUT2. IPv4
-| ... | ingress ACL (iACL) tests use 3-node topology TG - DUT1 - DUT2 - TG with
-| ... | one link between the nodes. DUT1 and DUT2 are configured with IPv4
-| ... | routing and static routes. DUT1 is configured with iACL on link to TG,
-| ... | iACL classification and permit action are configured on a per test
-| ... | case basis. Test ICMPv4 Echo Request packets are sent in one direction
-| ... | by TG on link to DUT1 and received on TG link to DUT2. On receive TG
-| ... | verifies if packets are accepted, or if received verifies packet IPv4
-| ... | src-addr, dst-addr and MAC addresses.
-
-*** Variables ***
-| ${dut1_to_tg_ip}= | 192.168.1.1
-| ${dut1_to_dut2_ip}= | 192.168.2.1
-| ${dut1_to_dut2_ip_GW}= | 192.168.2.2
-| ${test_dst_ip}= | 32.0.0.1
-| ${test_src_ip}= | 16.0.0.1
-| ${non_drop_dst_ip}= | 33.0.0.1
-| ${non_drop_src_ip}= | 15.0.0.1
-| ${prefix_length}= | 24
-| ${ip_version}= | ip4
-| ${l2_table}= | l2
-
-*** Test Cases ***
-| TC01: DUT with iACL IPv4 src-addr and dst-addr accepts matching pkts
-| | [Documentation]
-| | ... | On DUT1 add source and destination IPv4 addresses to classify table\
-| | ... | with 'permit'.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${non_drop_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send packet and verify headers | ${tg_node}
-| | ... | ${non_drop_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | ${table_index_1} | ${skip_n_1} | ${match_n_1}=
-| | ... | When Vpp Creates Classify Table L3 | ${dut1_node}
-| | ... | ${ip_version} | src | ${test_src_ip}
-| | ${table_index_2} | ${skip_n_2} | ${match_n_2}=
-| | ... | And Vpp Creates Classify Table L3 | ${dut1_node} | ${ip_version}
-| | ... | dst | ${test_dst_ip}
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut1_node} | permit | ${table_index_1}
-| | ... | ${ip_version} | src | ${test_src_ip}
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut1_node} | permit | ${table_index_2}
-| | ... | ${ip_version} | dst | ${test_dst_ip}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index_1}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index_2}
-| | Then Send packet and verify headers | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers | ${tg_node}
-| | ... | ${non_drop_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-
-| TC02: DUT with iACL IPv4 TCP src-ports and dst-ports accepts matching pkts
-| | [Documentation]
-| | ... | On DUT1 add TCP source and destination ports to classify table\
-| | ... | with 'permit'.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 25
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | TCP
-| | ... | source + destination
-| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 20
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | permit | ${table_index} | ${hex_value}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 25
-
-| TC03: DUT with iACL IPv4 UDP src-ports and dst-ports accepts matching pkts
-| | [Documentation]
-| | ... | On DUT1 add UDP source and destination ports to classify table\
-| | ... | with 'permit'.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 25
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | UDP
-| | ... | source + destination
-| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 20
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | permit | ${table_index} | ${hex_value}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 25
diff --git a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ipolicemarkbase-func.robot b/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ipolicemarkbase-func.robot
deleted file mode 100644
index 60e480c287..0000000000
--- a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ipolicemarkbase-func.robot
+++ /dev/null
@@ -1,162 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Force Tags | 3_NODE_DOUBLE_LINK_TOPO | VM_ENV | HW_ENV
-| Resource | resources/libraries/robot/features/policer.robot
-| Library | resources.libraries.python.Trace
-| Test Setup | Run Keywords | Set up functional test
-| ... | AND | Configure topology for IPv4 policer test
-| Test Teardown | Tear down functional test
-| Documentation | *IPv4 policer test cases*
-| ...
-| ... | *[Top] Network topologies:* TG=DUT1 2-node topology with two links\
-| ... | between nodes.
-| ... | *[Cfg] DUT configuration:* On DUT1 configure interfaces IPv4 adresses,\
-| ... | and static ARP record on the second interface.
-| ... | *[Ver] TG verification:* Test packet is sent from TG on the first link\
-| ... | to DUT1. Packet is received on TG on the second link from DUT1.
-| ... | *[Ref] Applicable standard specifications:* RFC2474, RFC2697, RFC2698.
-
-*** Variables ***
-| ${tg_to_dut_if1_ip4}= | 192.168.122.2
-| ${tg_to_dut_if2_ip4}= | 192.168.123.2
-| ${dut_to_tg_if1_ip4}= | 192.168.122.1
-| ${dut_to_tg_if2_ip4}= | 192.168.123.1
-| ${ip4_plen}= | ${24}
-
-| ${cir}= | ${100}
-| ${eir}= | ${150}
-| ${cb}= | ${200}
-| ${eb}= | ${300}
-
-*** Test Cases ***
-| TC01: VPP policer 2R3C Color-aware marks packet
-| | [Documentation]
-| | ... | [Top] TG=DUT1.
-| | ... | [Ref] RFC2474, RFC2698.
-| | ... | [Cfg] On DUT1 configure 2R3C color-aware policer on the first\
-| | ... | interface.
-| | ... | [Ver] TG sends IPv4 TCP packet on the first link to DUT1.\
-| | ... | On DUT1 packet is marked with DSCP tag. Verify if DUT1 sends\
-| | ... | correct IPv4 TCP packet with correct DSCP on the second link to TG.
-| | ${dscp}= | DSCP AF22
-| | Given Policer Set Name | policer1
-| | And Policer Set Node | ${dut_node}
-| | And Policer Set CIR | ${cir}
-| | And Policer Set EIR | ${eir}
-| | And Policer Set CB | ${cb}
-| | And Policer Set EB | ${eb}
-| | And Policer Set Rate Type pps
-| | And Policer Set Round Type Closest
-| | And Policer Set Type 2R3C 2698
-| | And Policer Set Conform Action Transmit
-| | And Policer Set Exceed Action Mark and Transmit | ${dscp}
-| | And Policer Set Violate Action Drop
-| | And Policer Enable Color Aware
-| | And Policer Classify Set Precolor Exceed
-| | And Policer Classify Set Interface | ${dut_to_tg_if1}
-| | And Policer Classify Set Match IP | ${tg_to_dut_if1_ip}
-| | When Policer Set Configuration
-| | Then Send packet and verify marking | ${tg_node} | ${tg_to_dut_if1}
-| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
-| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp}
-
-| TC02: VPP policer 2R3C Color-blind marks packet
-| | [Documentation]
-| | ... | [Top] TG=DUT1.
-| | ... | [Ref] RFC2474, RFC2698.
-| | ... | [Cfg] On DUT1 configure 2R3C color-blind policer on the first\
-| | ... | interface.
-| | ... | [Ver] TG sends IPv4 TCP packet on the first link to DUT1.\
-| | ... | On DUT1 packet is marked with DSCP tag. Verify if DUT1 sends\
-| | ... | correct IPv4 TCP packet with correct DSCP on the second link to TG.
-| | ${dscp}= | DSCP AF22
-| | Given Policer Set Name | policer1
-| | And Policer Set Node | ${dut_node}
-| | And Policer Set CIR | ${cir}
-| | And Policer Set EIR | ${eir}
-| | And Policer Set CB | ${cb}
-| | And Policer Set EB | ${eb}
-| | And Policer Set Rate Type pps
-| | And Policer Set Round Type Closest
-| | And Policer Set Type 2R3C 2698
-| | And Policer Set Conform Action Mark and Transmit | ${dscp}
-| | And Policer Set Exceed Action Transmit
-| | And Policer Set Violate Action Drop
-| | And Policer Classify Set Precolor Conform
-| | And Policer Classify Set Interface | ${dut_to_tg_if1}
-| | And Policer Classify Set Match IP | ${tg_to_dut_if1_ip}
-| | When Policer Set Configuration
-| | Then Send packet and verify marking | ${tg_node} | ${tg_to_dut_if1}
-| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
-| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp}
-
-| TC03: VPP policer 1R3C Color-aware marks packet
-| | [Documentation]
-| | ... | [Top] TG=DUT1.
-| | ... | [Ref] RFC2474, RFC2697.
-| | ... | [Cfg] On DUT1 configure 1R3C color-aware policer on the first\
-| | ... | interface.
-| | ... | [Ver] TG sends IPv4 TCP packet on the first link to DUT1.\
-| | ... | On DUT1 packet is marked with DSCP tag. Verify if DUT1 sends\
-| | ... | correct IPv4 TCP packet with correct DSCP on the second link to TG.
-| | ${dscp}= | DSCP AF22
-| | Given Policer Set Name | policer1
-| | And Policer Set Node | ${dut_node}
-| | And Policer Set CIR | ${1}
-| | And Policer Set CB | ${2}
-| | And Policer Set EB | ${eb}
-| | And Policer Set Rate Type pps
-| | And Policer Set Round Type Closest
-| | And Policer Set Type 1R3C
-| | And Policer Set Conform Action Transmit
-| | And Policer Set Exceed Action Mark and Transmit | ${dscp}
-| | And Policer Set Violate Action Drop
-| | And Policer Enable Color Aware
-| | And Policer Classify Set Precolor Exceed
-| | And Policer Classify Set Interface | ${dut_to_tg_if1}
-| | And Policer Classify Set Match IP | ${tg_to_dut_if1_ip}
-| | When Policer Set Configuration
-| | Then Send packet and verify marking | ${tg_node} | ${tg_to_dut_if1}
-| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
-| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp}
-
-| TC04: VPP policer 1R3C Color-blind marks packet
-| | [Documentation]
-| | ... | [Top] TG=DUT1.
-| | ... | [Ref] RFC2474, RFC2697.
-| | ... | [Cfg] On DUT1 configure 1R3C color-blind policer on the first\
-| | ... | interface.
-| | ... | [Ver] TG sends IPv4 TCP packet on the first link to DUT1.\
-| | ... | On DUT1 packet is marked with DSCP tag. Verify if DUT1 sends\
-| | ... | correct IPv4 TCP packet with correct DSCP on the second link to TG.
-| | ${dscp}= | DSCP AF22
-| | Given Policer Set Name | policer1
-| | And Policer Set Node | ${dut_node}
-| | And Policer Set CIR | ${cir}
-| | And Policer Set CB | ${cb}
-| | And Policer Set EB | ${eb}
-| | And Policer Set Rate Type pps
-| | And Policer Set Round Type Closest
-| | And Policer Set Type 1R3C
-| | And Policer Set Conform Action Mark and Transmit | ${dscp}
-| | And Policer Set Exceed Action Transmit
-| | And Policer Set Violate Action Drop
-| | And Policer Classify Set Precolor Conform
-| | And Policer Classify Set Interface | ${dut_to_tg_if1}
-| | And Policer Classify Set Match IP | ${tg_to_dut_if1_ip}
-| | When Policer Set Configuration
-| | Then Send packet and verify marking | ${tg_node} | ${tg_to_dut_if1}
-| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
-| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp} \ No newline at end of file
diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-copblklistbase-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-copblklistbase-func.robot
deleted file mode 100644
index 9e45799606..0000000000
--- a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-copblklistbase-func.robot
+++ /dev/null
@@ -1,103 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.Cop
-| Library | resources.libraries.python.IPUtil
-| Library | resources.libraries.python.Trace
-| ...
-| Resource | resources/libraries/robot/ip/ip6.robot
-| Resource | resources/libraries/robot/l2/l2_xconnect.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| ...
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down functional test
-| ...
-| Documentation | *COP Security IPv6 Blacklist Tests*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-ICMPv6 on all links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and
-| ... | static routes. COP security black-lists are applied on DUT1 ingress
-| ... | interface from TG. DUT2 is configured with L2XC.
-| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in
-| ... | one direction by TG on link to DUT1; on receive TG verifies packets for
-| ... | correctness and drops as applicable.
-| ... | *[Ref] Applicable standard specifications:*
-
-*** Variables ***
-| ${tg_node}= | ${nodes['TG']}
-| ${dut1_node}= | ${nodes['DUT1']}
-| ${dut2_node}= | ${nodes['DUT2']}
-
-| ${dut1_if1_ip}= | 3ffe:62::1
-| ${dut1_if2_ip}= | 3ffe:63::1
-| ${dut1_if1_ip_GW}= | 3ffe:62::2
-| ${dut1_if2_ip_GW}= | 3ffe:63::2
-
-| ${dut2_if1_ip}= | 3ffe:72::1
-| ${dut2_if2_ip}= | 3ffe:73::1
-
-| ${test_dst_ip}= | 3ffe:64::1
-| ${test_src_ip}= | 3ffe:61::1
-
-| ${cop_dut_ip}= | 3ffe:61::
-
-| ${ip_prefix}= | 64
-
-| ${fib_table_number}= | 1
-
-*** Test Cases ***
-| TC01: DUT drops IPv6 pkts with COP blacklist set with IPv6 src-addr
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 \
-| | ... | configure interface IPv6 addresses and routes in the main
-| | ... | routing domain, add COP blacklist on interface to TG with IPv6
-| | ... | src-addr matching packets generated by TG; on DUT2 configure L2
-| | ... | xconnect. [Ver] Make TG send ICMPv6 Echo Req on its interface to
-| | ... | DUT1; verify no ICMPv6 Echo Req pkts are received. [Ref]
-| | Given Configure path in 3-node circular topology
-| | ... | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node}
-| | And Set interfaces in 3-node circular topology up
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip} | ${ip_prefix}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip} | ${ip_prefix}
-| | And VPP Interface Set IP Address
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_if1_ip} | ${ip_prefix}
-| | And VPP Interface Set IP Address
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_if2_ip} | ${ip_prefix}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip_GW} | ${tg_to_dut1_mac}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip_GW} | ${tg_to_dut2_mac}
-| | And Vpp Route Add | ${dut1_node} | ${test_dst_ip} | ${ip_prefix}
-| | ... | gateway=${dut1_if2_ip_GW} | interface=${dut1_to_dut2}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | And Add fib table | ${dut1_node} | ${fib_table_number} | ipv6=${TRUE}
-| | When COP Add whitelist Entry
-| | ... | ${dut1_node} | ${dut1_to_tg} | ip6 | ${fib_table_number}
-| | And COP interface enable or disable | ${dut1_node} | ${dut1_to_tg} | enable
-| | Then Packet transmission from port to port should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac}
-| | ... | ${tg_to_dut2_mac}
diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-copwhlistbase-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-copwhlistbase-func.robot
deleted file mode 100644
index a69171c426..0000000000
--- a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-copwhlistbase-func.robot
+++ /dev/null
@@ -1,105 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.Cop
-| Library | resources.libraries.python.IPUtil
-| Library | resources.libraries.python.Trace
-| ...
-| Resource | resources/libraries/robot/ip/ip6.robot
-| Resource | resources/libraries/robot/l2/l2_xconnect.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| ...
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down functional test
-| ...
-| Documentation | *COP Security IPv6 Whitelist Tests*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-ICMPv6 on all links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and
-| ... | static routes. COP security white-lists are applied on DUT1 ingress
-| ... | interface from TG. DUT2 is configured with L2XC.
-| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in
-| ... | one direction by TG on link to DUT1; on receive TG verifies packets for
-| ... | correctness and drops as applicable.
-| ... | *[Ref] Applicable standard specifications:*
-
-*** Variables ***
-| ${tg_node}= | ${nodes['TG']}
-| ${dut1_node}= | ${nodes['DUT1']}
-| ${dut2_node}= | ${nodes['DUT2']}
-
-| ${dut1_if1_ip}= | 3ffe:62::1
-| ${dut1_if2_ip}= | 3ffe:63::1
-| ${dut1_if1_ip_GW}= | 3ffe:62::2
-| ${dut1_if2_ip_GW}= | 3ffe:63::2
-
-| ${dut2_if1_ip}= | 3ffe:72::1
-| ${dut2_if2_ip}= | 3ffe:73::1
-
-| ${test_dst_ip}= | 3ffe:64::1
-| ${test_src_ip}= | 3ffe:61::1
-
-| ${cop_dut_ip}= | 3ffe:61::
-
-| ${ip_prefix}= | 64
-
-| ${fib_table_number}= | 1
-
-*** Test Cases ***
-| TC01: DUT permits IPv6 pkts with COP whitelist set with IPv6 src-addr
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 \
-| | ... | configure interface IPv6 addresses and routes in the main
-| | ... | routing domain, add COP whitelist on interface to TG with IPv6
-| | ... | src-addr matching packets generated by TG; on DUT2 configure L2
-| | ... | xconnect. [Ver] Make TG send ICMPv6 Echo Req on its interface to
-| | ... | DUT1; verify received ICMPv6 Echo Req pkts are correct. [Ref]
-| | Given Configure path in 3-node circular topology
-| | ... | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node}
-| | And Set interfaces in 3-node circular topology up
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip} | ${ip_prefix}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip} | ${ip_prefix}
-| | And VPP Interface Set IP Address
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_if1_ip} | ${ip_prefix}
-| | And VPP Interface Set IP Address
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_if2_ip} | ${ip_prefix}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip_GW} | ${tg_to_dut1_mac}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip_GW} | ${tg_to_dut2_mac}
-| | And Vpp Route Add | ${dut1_node} | ${test_dst_ip} | ${ip_prefix}
-| | ... | gateway=${dut1_if2_ip_GW} | interface=${dut1_to_dut2}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | And Add fib table | ${dut1_node} | ${fib_table_number} | ipv6=${TRUE}
-| | And Vpp Route Add | ${dut1_node} | ${cop_dut_ip} | ${ip_prefix}
-| | ... | vrf=${fib_table_number} | local=${TRUE}
-| | When COP Add whitelist Entry | ${dut1_node} | ${dut1_to_tg} | ip6 |
-| | ... | ${fib_table_number}
-| | And COP interface enable or disable | ${dut1_node} | ${dut1_to_tg} | enable
-| | Then Send packet and verify headers | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac}
-| | ... | ${tg_to_dut2_mac}
diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-iaclbase-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-iaclbase-func.robot
deleted file mode 100644
index ad0d322948..0000000000
--- a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-iaclbase-func.robot
+++ /dev/null
@@ -1,200 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.Classify.Classify
-| Library | resources.libraries.python.IPUtil
-| Library | resources.libraries.python.Trace
-| ...
-| Resource | resources/libraries/robot/ip/ip6.robot
-| Resource | resources/libraries/robot/l2/l2_xconnect.robot
-| Resource | resources/libraries/robot/shared/counters.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| ...
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | SKIP_VPP_PATCH
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down functional test
-| ...
-| Documentation | *IPv6 routing with ingress ACL test cases*
-| ...
-| ... | Encapsulations: Eth-IPv6 on links TG-DUT1, TG-DUT2, DUT1-DUT2. IPv6
-| ... | ingress ACL (iACL) tests use 3-node topology TG - DUT1 - DUT2 - TG with
-| ... | one link between the nodes. DUT1 and DUT2 are configured with IPv6
-| ... | routing and static routes. DUT1 is configured with iACL on link to TG,
-| ... | iACL classification and permit action are configured on a per test
-| ... | case basis. Test ICMPv6 Echo Request packets are sent in one direction
-| ... | by TG on link to DUT1 and received on TG link to DUT2. On receive TG
-| ... | verifies if packets are accepted, or if received verifies packet IPv6
-| ... | src-addr, dst-addr and MAC addresses.
-
-*** Variables ***
-| ${dut1_to_tg_ip}= | 3ffe:62::1
-| ${dut1_to_dut2_ip}= | 3ffe:63::1
-| ${dut1_to_dut2_ip_GW}= | 3ffe:63::2
-| ${dut2_to_dut1_ip}= | 3ffe:72::1
-| ${dut2_to_tg_ip}= | 3ffe:73::1
-| ${test_dst_ip}= | 3ffe:64::1
-| ${test_src_ip}= | 3ffe:61::1
-| ${non_drop_dst_ip}= | 3ffe:54::1
-| ${non_drop_src_ip}= | 3ffe:51::1
-| ${prefix_length}= | 64
-| ${ip_version}= | ip6
-| ${l2_table}= | l2
-
-*** Test Cases ***
-| TC01: DUT with iACL IPv6 src-addr and dst-addr accepts matching pkts
-| | [Documentation]
-| | ... | On DUT1 add source and destination IPv6 addresses to classify table\
-| | ... | with 'permit'.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${non_drop_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | Then Send packet and verify headers | ${tg_node}
-| | ... | ${non_drop_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | ${table_index_1} | ${skip_n_1} | ${match_n_1}=
-| | ... | When Vpp Creates Classify Table L3 | ${dut1_node}
-| | ... | ${ip_version} | src | ${test_src_ip}
-| | ${table_index_2} | ${skip_n_2} | ${match_n_2}=
-| | ... | And Vpp Creates Classify Table L3 | ${dut1_node} | ${ip_version}
-| | ... | dst | ${test_dst_ip}
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut1_node} | permit | ${table_index_1}
-| | ... | ${ip_version} | src | ${test_src_ip}
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut1_node} | permit | ${table_index_2}
-| | ... | ${ip_version} | dst | ${test_dst_ip}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index_1}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index_2}
-| | Then Send packet and verify headers | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers | ${tg_node}
-| | ... | ${non_drop_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-
-| TC02: DUT with iACL IPv6 TCP src-ports and dst-ports accepts matching pkts
-| | [Documentation]
-| | ... | On DUT1 add TCP source and destination ports to classify table\
-| | ... | with 'permit'.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip}
-| | ... | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 25
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | TCP
-| | ... | source + destination
-| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 20
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | permit | ${table_index} | ${hex_value}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 25
-
-| TC03: DUT with iACL IPv6 UDP src-ports and dst-ports accepts matching pkts
-| | [Documentation]
-| | ... | On DUT1 add UDP source and destination ports to classify table\
-| | ... | with 'permit'.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip}
-| | ... | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 25
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | UDP
-| | ... | source + destination
-| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 20
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | permit | ${table_index} | ${hex_value}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 25
diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ipolicemarkbase-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ipolicemarkbase-func.robot
deleted file mode 100644
index 788d74ba92..0000000000
--- a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ipolicemarkbase-func.robot
+++ /dev/null
@@ -1,161 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Force Tags | 3_NODE_DOUBLE_LINK_TOPO | VM_ENV | HW_ENV
-| Resource | resources/libraries/robot/features/policer.robot
-| Library | resources.libraries.python.Trace
-| Test Setup | Run Keywords | Set up functional test
-| ... | AND | Configure topology for IPv6 policer test
-| Test Teardown | Tear down functional test
-| Documentation | *IPv6 policer test cases*
-| ...
-| ... | *[Top] Network topologies:* TG=DUT1 2-node topology with two links\
-| ... | between nodes.
-| ... | *[Cfg] DUT configuration:* On DUT1 configure interfaces IPv6 adresses,\
-| ... | and static neighbor record on the second interface.
-| ... | *[Ver] TG verification:* Test packet is sent from TG on the first link\
-| ... | to DUT1. Packet is received on TG on the second link from DUT1.
-| ... | *[Ref] Applicable standard specifications:* RFC2474, RFC2697, RFC2698.
-
-*** Variables ***
-| ${tg_to_dut_if1_ip6}= | 3ffe:5f::2
-| ${tg_to_dut_if2_ip6}= | 3ffe:60::2
-| ${dut_to_tg_if1_ip6}= | 3ffe:5f::1
-| ${dut_to_tg_if2_ip6}= | 3ffe:60::1
-| ${ip6_plen}= | ${64}
-
-| ${cir}= | ${100}
-| ${eir}= | ${150}
-| ${cb}= | ${200}
-| ${eb}= | ${300}
-
-*** Test Cases ***
-| TC01: VPP policer 2R3C Color-aware marks packet
-| | [Documentation]
-| | ... | [Top] TG=DUT1.
-| | ... | [Ref] RFC2474, RFC2698.
-| | ... | [Cfg] On DUT1 configure 2R3C color-aware policer on the first\
-| | ... | interface.
-| | ... | [Ver] TG sends IPv6 TCP packet on the first link to DUT1.\
-| | ... | On DUT1 packet is marked with DSCP tag. Verify if DUT1 sends\
-| | ... | correct IPv6 TCP packet with correct DSCP on the second link to TG.
-| | ${dscp}= | DSCP AF22
-| | Given Policer Set Name | policer1
-| | And Policer Set Node | ${dut_node}
-| | And Policer Set CIR | ${cir}
-| | And Policer Set EIR | ${eir}
-| | And Policer Set CB | ${cb}
-| | And Policer Set EB | ${eb}
-| | And Policer Set Rate Type pps
-| | And Policer Set Round Type Closest
-| | And Policer Set Type 2R3C 2698
-| | And Policer Set Conform Action Transmit
-| | And Policer Set Exceed Action Mark and Transmit | ${dscp}
-| | And Policer Set Violate Action Drop
-| | And Policer Enable Color Aware
-| | And Policer Classify Set Precolor Exceed
-| | And Policer Classify Set Interface | ${dut_to_tg_if1}
-| | And Policer Classify Set Match IP | ${tg_to_dut_if1_ip}
-| | When Policer Set Configuration
-| | Then Send packet and verify marking | ${tg_node} | ${tg_to_dut_if1}
-| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
-| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp}
-
-| TC02: VPP policer 2R3C Color-blind marks packet
-| | [Documentation]
-| | ... | [Top] TG=DUT1.
-| | ... | [Ref] RFC2474, RFC2698.
-| | ... | [Cfg] On DUT1 configure 2R3C color-blind policer on the first\
-| | ... | interface.
-| | ... | [Ver] TG sends IPv6 TCP packet on the first link to DUT1.\
-| | ... | On DUT1 packet is marked with DSCP tag. Verify if DUT1 sends\
-| | ... | correct IPv6 TCP packet with correct DSCP on the second link to TG.
-| | ${dscp}= | DSCP AF22
-| | Given Policer Set Name | policer1
-| | And Policer Set Node | ${dut_node}
-| | And Policer Set CIR | ${cir}
-| | And Policer Set EIR | ${eir}
-| | And Policer Set CB | ${cb}
-| | And Policer Set EB | ${eb}
-| | And Policer Set Rate Type pps
-| | And Policer Set Round Type Closest
-| | And Policer Set Type 2R3C 2698
-| | And Policer Set Conform Action Mark and Transmit | ${dscp}
-| | And Policer Set Exceed Action Transmit
-| | And Policer Set Violate Action Drop
-| | And Policer Classify Set Precolor Conform
-| | And Policer Classify Set Interface | ${dut_to_tg_if1}
-| | And Policer Classify Set Match IP | ${tg_to_dut_if1_ip}
-| | When Policer Set Configuration
-| | Then Send packet and verify marking | ${tg_node} | ${tg_to_dut_if1}
-| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
-| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp}
-
-| TC03: VPP policer 1R3C Color-aware marks packet
-| | [Documentation]
-| | ... | [Top] TG=DUT1.
-| | ... | [Ref] RFC2474, RFC2697.
-| | ... | [Cfg] On DUT1 configure 1R3C color-aware policer on the first\
-| | ... | interface.
-| | ... | [Ver] TG sends IPv6 TCP packet on the first link to DUT1.\
-| | ... | On DUT1 packet is marked with DSCP tag. Verify if DUT1 sends\
-| | ... | correct IPv6 TCP packet with correct DSCP on the second link to TG.
-| | ${dscp}= | DSCP AF22
-| | Given Policer Set Name | policer1
-| | And Policer Set Node | ${dut_node}
-| | And Policer Set CIR | ${1}
-| | And Policer Set CB | ${2}
-| | And Policer Set EB | ${eb}
-| | And Policer Set Rate Type pps
-| | And Policer Set Round Type Closest
-| | And Policer Set Type 1R3C
-| | And Policer Set Conform Action Transmit
-| | And Policer Set Exceed Action Mark and Transmit | ${dscp}
-| | And Policer Set Violate Action Drop
-| | And Policer Enable Color Aware
-| | And Policer Classify Set Precolor Exceed
-| | And Policer Classify Set Interface | ${dut_to_tg_if1}
-| | And Policer Classify Set Match IP | ${tg_to_dut_if1_ip}
-| | When Policer Set Configuration
-| | Then Send packet and verify marking | ${tg_node} | ${tg_to_dut_if1}
-| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
-| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp}
-
-| TC04: VPP policer 1R3C Color-blind marks packet
-| | [Documentation]
-| | ... | [Top] TG=DUT1.
-| | ... | [Ref] RFC2474, RFC2697.
-| | ... | [Cfg] On DUT1 configure 1R3C color-blind policer on the first\
-| | ... | interface.
-| | ... | [Ver] TG sends IPv6 TCP packet on the first link to DUT1.\
-| | ... | On DUT1 packet is marked with DSCP tag. Verify if DUT1 sends\
-| | ... | correct IPv6 TCP packet with correct DSCP on the second link to TG.
-| | ${dscp}= | DSCP AF22
-| | Given Policer Set Name | policer1
-| | And Policer Set Node | ${dut_node}
-| | And Policer Set CIR | ${cir}
-| | And Policer Set CB | ${cb}
-| | And Policer Set Rate Type pps
-| | And Policer Set Round Type Closest
-| | And Policer Set Type 1R3C
-| | And Policer Set Conform Action Mark and Transmit | ${dscp}
-| | And Policer Set Exceed Action Transmit
-| | And Policer Set Violate Action Drop
-| | And Policer Classify Set Precolor Conform
-| | And Policer Classify Set Interface | ${dut_to_tg_if1}
-| | And Policer Classify Set Match IP | ${tg_to_dut_if1_ip}
-| | When Policer Set Configuration
-| | Then Send packet and verify marking | ${tg_node} | ${tg_to_dut_if1}
-| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
-| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp}
diff --git a/tests/vpp/func/l2xc/eth2p-eth-l2xcbase-iaclbase-func.robot b/tests/vpp/func/l2xc/eth2p-eth-l2xcbase-iaclbase-func.robot
deleted file mode 100644
index c12a6100f4..0000000000
--- a/tests/vpp/func/l2xc/eth2p-eth-l2xcbase-iaclbase-func.robot
+++ /dev/null
@@ -1,143 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/counters.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/l2/l2_xconnect.robot
-| Resource | resources/libraries/robot/l2/l2_traffic.robot
-| Library | resources.libraries.python.Classify.Classify
-| Library | resources.libraries.python.Trace
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | SKIP_VPP_PATCH
-| Test Setup | Set up functional test
-| Test Teardown | Tear down functional test
-| Documentation | *Ingress ACL test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG - DUT1 - DUT2 - TG
-| ... | with one link between the nodes.
-| ... | *[Cfg] DUT configuration:* DUT2 is configured with L2 Cross connect.
-| ... | DUT1 is configured with iACL classification on link to TG,
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent
-| ... | in one direction by TG on link to DUT1 and received on TG link
-| ... | to DUT2. On receive TG verifies if packets are accepted.
-
-*** Variables ***
-| ${l2_table}= | l2
-
-*** Test Cases ***
-| TC01: DUT with iACL MAC src-addr accepts matching pkts
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 add source MAC address to classify table with 'permit'.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Configure L2XC
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_tg}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table L2 | ${dut1_node}
-| | ... | src | ${tg_to_dut1_mac}
-| | And Vpp Configures Classify Session L2
-| | ... | ${dut1_node} | permit | ${table_index} | src | ${tg_to_dut1_mac}
-| | And Vpp Enable Input ACL Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-
-| TC02: DUT with iACL MAC dst-addr accepts matching pkts
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 add destination MAC address to classify
-| | ... | table with 'permit'.
-| | ... | [Ver] Make TG verify matching packets are accepted.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Configure L2XC
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_tg}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table L2 | ${dut1_node}
-| | ... | dst | ${tg_to_dut2_mac}
-| | And Vpp Configures Classify Session L2
-| | ... | ${dut1_node} | permit | ${table_index} | dst | ${tg_to_dut2_mac}
-| | And Vpp Enable Input ACL Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-
-| TC03: DUT with iACL MAC src-addr and dst-addr accepts matching pkts
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 add source and destination MAC address to classify
-| | ... | table with 'permit'.
-| | ... | [Ver] Make TG verify matching packets are accepted.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Configure L2XC
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_tg}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-| | ${table_index_1} | ${skip_n_1} | ${match_n_1}=
-| | ... | When Vpp Creates Classify Table L2 | ${dut1_node}
-| | ... | src | ${tg_to_dut1_mac}
-| | And Vpp Configures Classify Session L2
-| | ... | ${dut1_node} | permit | ${table_index_1} | src | ${tg_to_dut1_mac}
-| | ${table_index_2} | ${skip_n_2} | ${match_n_2}=
-| | ... | When Vpp Creates Classify Table L2 | ${dut1_node}
-| | ... | dst | ${tg_to_dut1_mac}
-| | And Vpp Configures Classify Session L2
-| | ... | ${dut1_node} | permit | ${table_index_2} | dst | ${tg_to_dut1_mac}
-| | And Vpp Enable Input ACL Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index_1}
-| | And Vpp Enable Input ACL Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index_2}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-
-| TC04: DUT with iACL EtherType accepts matching pkts
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 add EtherType IPv4(0x0800) to classify table with
-| | ... | 'permit'.
-| | ... | [Ver] Make TG verify matching packets are accepted.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Configure L2XC
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_tg}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex
-| | ... | ${dut1_node} | 000000000000000000000000ffff
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | permit | ${table_index} | 0000000000000000000000000800
-| | And Vpp Enable Input ACL Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}