Upgrade autogen to NICs and search types

+ All perf suites updated, as autogen change is backward incompatible.
+ Only x710 -ndrpdr suites remain in git repository.
+ Removed retry feature of run_tests.
+ Renamed topology_type and traffic_type to traffic_profile.
+ Renamed framesize to frame_size; nic_model to nic_name.
+ Reordered Variables table to start with nic_name and overhead.
+ Fixed wrong overhead value in some cbc-sha1 suites.
+ Fixed some suite tags.
++ Introduced tags to distinguish suites, such as IPSECINT.
+ Bound crypto hardware to NIC name.
+ Implemented NIC limit hiding.
+ Also search and teardown related arguments are now hidden.
+ Main measurement keywords updated to new arg handling.
+ Max rate related keywords moved to performance_limits.robot
+ Teardowns unified.
+ Generated tests are archived.
++ Generated directory is .gitignore-d.
+ Regenerator raises an exception on seeing non-compatible suite.
++ Relatively helpful message should be seen in exception.
+ Suite and template Documentation has generated parts.
+- With short NIC names only.
+ Autogen checker also upgraded.
+ Tag expressions replaced with long files to ensure analogous tests.

Change-Id: I60e9a999187e7da1f60d0eb4fb02afa14682aa46
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

1 files changed, 0 insertions, 146 deletions

diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-ndrpdr.robot
deleted file mode 100644
index 836936cb2e..0000000000
--- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-ndrpdr.robot
+++ /dev/null
@@ -1,146 +0,0 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE | MEMIF | SINGLE_MEMIF
-| ... | DOCKER
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 3-node performance topology with DUT's NIC model | L2
-| ... | Intel-X520-DA2
-| ... | AND | Set up performance test suite with MEMIF
-| ...
-| Suite Teardown | Tear down 3-node performance topology
-| ...
-| Test Setup | Set up performance test
-| ...
-| Test Teardown | Run Keywords
-| ... | Tear down performance discovery test | ${min_rate}pps
-| ... | ${framesize} | ${traffic_profile}
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation |  *RFC2544: Pkt throughput L2XC test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 configured with L2 cross-
-| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
-| ... | Container is connected to VPP via Memif interface running same VPP
-| ... | version as running on DUT. Resources are limited via cgroup to use 5
-| ... | cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints. Cross Horizontal topology with packets flowing via DUT (VPP)
-| ... | to Container, then via horizontal memif to the next Container, and so on
-| ... | until the last Container then to NIC (in last Container). Single
-| ... | Container is supported as of now.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
-| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
-| ... | of packets transmitted. NDR and PDR are discovered for different
-| ... | Ethernet L2 frame sizes using MLRsearch library.
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-# X520-DA2 bandwidth limit
-| ${s_limit}= | ${10000000000}
-# Traffic profile
-| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | cross_horiz
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | ${framesize}
-| | Set Test Variable | ${min_rate} | ${10000}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add single PCI device to all DUTs
-| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
-| | ... | ${s_limit} | ${framesize}
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | And Initialize L2 xconnect for single memif
-| | Then Find NDR and PDR intervals using optimized search
-| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate}
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2xcbase-eth-1memif-1dcr-ndrpdr
-| | [Tags] | 64B | 1C
-| | framesize=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2xcbase-eth-1memif-1dcr-ndrpdr
-| | [Tags] | 64B | 2C
-| | framesize=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2xcbase-eth-1memif-1dcr-ndrpdr
-| | [Tags] | 64B | 4C
-| | framesize=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2xcbase-eth-1memif-1dcr-ndrpdr
-| | [Tags] | 1518B | 1C
-| | framesize=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2xcbase-eth-1memif-1dcr-ndrpdr
-| | [Tags] | 1518B | 2C
-| | framesize=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2xcbase-eth-1memif-1dcr-ndrpdr
-| | [Tags] | 1518B | 4C
-| | framesize=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2xcbase-eth-1memif-1dcr-ndrpdr
-| | [Tags] | 9000B | 1C
-| | framesize=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2xcbase-eth-1memif-1dcr-ndrpdr
-| | [Tags] | 9000B | 2C
-| | framesize=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2xcbase-eth-1memif-1dcr-ndrpdr
-| | [Tags] | 9000B | 4C
-| | framesize=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2xcbase-eth-1memif-1dcr-ndrpdr
-| | [Tags] | IMIX | 1C
-| | framesize=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2xcbase-eth-1memif-1dcr-ndrpdr
-| | [Tags] | IMIX | 2C
-| | framesize=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2xcbase-eth-1memif-1dcr-ndrpdr
-| | [Tags] | IMIX | 4C
-| | framesize=IMIX_v4_1 | phy_cores=${4}