diff options
author | Vratko Polak <vrpolak@cisco.com> | 2019-02-18 14:53:28 +0100 |
---|---|---|
committer | Peter Mikus <pmikus@cisco.com> | 2019-02-19 15:38:49 +0000 |
commit | d1589ad74e515757fb12cf8a5f976282924afe13 (patch) | |
tree | 9f30fa058d744db2e7480815333d2412ff15803e /tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-6dcr-vppip4-mrr.robot | |
parent | b0330dead145c5c30a09be05b6a33c7d6dc0e72d (diff) |
Adapt autogen for SFd tests
+ Make the skipping logic in autogen more flexible.
+ Do not emit 4c cases when there is too much VMs/containers.
+ Peter says the second -eth- should be renamed away from suites.
+ Regenerate suites so test case names match (new) suite names.
Change-Id: I95ecc47ca07b8bae6693d5d4330811ff55672fc4
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
Diffstat (limited to 'tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-6dcr-vppip4-mrr.robot')
-rw-r--r-- | tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-6dcr-vppip4-mrr.robot | 140 |
1 files changed, 140 insertions, 0 deletions
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-6dcr-vppip4-mrr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-6dcr-vppip4-mrr.robot new file mode 100644 index 0000000000..e161a2d6c0 --- /dev/null +++ b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-6dcr-vppip4-mrr.robot @@ -0,0 +1,140 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R6C +| ... | NF_DENSITY | PIPELINE | NF_VPPIP4 +| ... +| Suite Setup | Run Keywords +| ... | Set up 2-node performance topology with DUT's NIC model | L3 +| ... | Intel-X710 +| ... | AND | Set up performance test suite with MEMIF +| ... +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| ... +| Test Teardown | Run Keywords +| ... | Tear down performance mrr test +| ... | AND | Tear down performance test with container +| ... +| Test Template | Local Template +| ... +| Documentation | *Raw results L2BD test cases with 2memif 1 pipeline 6 docker +| ... | containers* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains +| ... | and MAC learning enabled. DUT1 tested with 2p10GE NIC X710 by Intel. +| ... | Container is connected to VPP via Memif interface. Container is running +| ... | same VPP version as running on DUT. Container is limited via cgroup to +| ... | use cores allocated from pool of isolated CPUs. There are no memory +| ... | contraints. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per +| ... | flow-group) with all packets containing Ethernet header, IPv4 header +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | addresses of the TG node interfaces. + +*** Variables *** +# X710-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c6n +# Container +| ${container_engine}= | Docker +| ${container_chain_topology}= | pipeline_ip4 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_limit} | ${framesize} +| | And Apply startup configuration on all VPP DUTs +| | And Set up performance test with containers +| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False} +| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs +| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-2memif-1pipe-6dcr-vppip4-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-2memif-1pipe-6dcr-vppip4-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-2memif-1pipe-6dcr-vppip4-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-2memif-1pipe-6dcr-vppip4-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-2memif-1pipe-6dcr-vppip4-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-2memif-1pipe-6dcr-vppip4-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-2memif-1pipe-6dcr-vppip4-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-2memif-1pipe-6dcr-vppip4-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-2memif-1pipe-6dcr-vppip4-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-2memif-1pipe-6dcr-vppip4-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-2memif-1pipe-6dcr-vppip4-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-2memif-1pipe-6dcr-vppip4-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} |