Add memif with DMA test suites

Change-Id: I8c27b5956c0c26bb2de48321675e285ed961412f
Signed-off-by: xinfengx <xinfengx.zhao@intel.com>

1 files changed, 163 insertions, 0 deletions

diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr.robot
new file mode 100644
index 0000000000..8b64f858a2
--- /dev/null
+++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr.robot
@@ -0,0 +1,163 @@
+# Copyright (c) 2024 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/features/dma.robot
+|
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
+| ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | MEMIF | DOCKER | DMA
+| ... | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr
+|
+| Suite Setup | Setup suite topology interfaces | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD with memif and IEEE 802.1Q \
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. IEEE \
+| ... | 802.1Q tagging is applied on link between DUT1-if2 and TG-if2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. Container is connected to VPP via \
+| ... | Memif interface. Container is running same VPP version as running \
+| ... | on DUT. Container is limited via cgroup to use 3 cores allocated from \
+| ... | pool of isolated CPUs. There are no memory constraints. DUT1 is tested \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are \
+| ... | generated by TG on links to DUT1. TG traffic profile contains two L3 \
+| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with IP \
+| ... | protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L2
+| ${overhead}= | ${4}
+| ${subid}= | 10
+| ${tag_rewrite}= | pop-1
+| ${bd_id1}= | 1
+| ${bd_id2}= | 2
+| ${heap_size_mult}= | ${2}
+#| ${page_size}= | 1G
+# Traffic profile:
+| ${traffic_profile}= | trex-stl-dot1qip4asym-ip4src254
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_dma
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | - **[Cfg]** Each DUT runs L2BD switching with VLAN and uses \
+| | ... | ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Enable DMA WQs on all DUTs
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${True}
+| | ... | pinning=${True}
+| | Initialize L2 Bridge Domain with memif pairs and VLAN in circular topology
+| | ... | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| 64B-1c-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| 64B-2c-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| 64B-4c-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| 1518B-1c-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| IMIX-4c-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}