NF density tests with dtc=0.5 and dtcr=2

Change-Id: Icff556142280ad0b6261e0a2bfb71672ee6b3807
Signed-off-by: Peter Mikus <pmikus@cisco.com>

38 files changed, 0 insertions, 5224 deletions

diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index 3707811c42..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R6C
-| ... | NF_DENSITY | CHAIN | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 6 docker container*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c6n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index 142e6ea5e4..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 6R1C
-| ... | NF_DENSITY | CHAIN | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 6 chains
-| ... | 6 docker container*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c1n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index de3164cf50..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 6R2C
-| ... | NF_DENSITY | PIPELINE | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with 12memif 6
-| ... | pipelines 12 docker containers*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c2n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | pipeline_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index eea72f8cd5..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 6R1C
-| ... | NF_DENSITY | PIPELINE | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with 12memif 6
-| ... | pipelines 1 docker containers*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c1n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | pipeline_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index ac36c6c785..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R8C
-| ... | NF_DENSITY | CHAIN | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 8 docker container*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c8n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index df280614c3..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R4C
-| ... | NF_DENSITY | CHAIN | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 8 docker container*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c4n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index f916d9805a..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R2C
-| ... | NF_DENSITY | CHAIN | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 4 chains
-| ... | 8 docker container*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c2n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index 486d217029..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 8R1C
-| ... | NF_DENSITY | CHAIN | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 8 chains
-| ... | 8 docker container*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c1n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-8pipe-16dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-8pipe-16dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index 1020f16e41..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-8pipe-16dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,124 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 8R2C
-| ... | NF_DENSITY | PIPELINE | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with 16memif 8
-| ... | pipelines 16 docker containers*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c2n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | pipeline_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-16memif-8pipe-16dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-16memif-8pipe-16dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc04-1518B-1c-eth-l2bd-16memif-8pipe-16dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-16memif-8pipe-16dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc07-9000B-1c-eth-l2bd-16memif-8pipe-16dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-16memif-8pipe-16dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc10-IMIX-1c-eth-l2bd-16memif-8pipe-16dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-16memif-8pipe-16dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index 9ca59242d0..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 8R1C
-| ... | NF_DENSITY | PIPELINE | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with 16memif 8
-| ... | pipelines 8 docker containers*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c1n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | pipeline_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index 7162606a7d..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 10R1C
-| ... | NF_DENSITY | CHAIN | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 10 chains
-| ... | 10 docker container*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-10c1n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index 13e412b71d..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 10R1C
-| ... | NF_DENSITY | PIPELINE | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with 20memif 10
-| ... | pipelines 1 docker containers*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-10c1n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | pipeline_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index 0fe7945ba5..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R10C
-| ... | NF_DENSITY | CHAIN | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 10 docker container*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c10n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index 080b3598e4..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R6C
-| ... | NF_DENSITY | CHAIN | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 12 docker container*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c6n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index 5daf1ad96e..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 6R2C
-| ... | NF_DENSITY | CHAIN | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 6 chains
-| ... | 12 docker container*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c2n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index ecd89489ff..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R1C
-| ... | NF_DENSITY | CHAIN | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 1 docker container*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c1n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index 5d0f00679f..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R10C
-| ... | NF_DENSITY | PIPELINE | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 10 docker containers*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c10n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | pipeline_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index e53c612eb2..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R1C
-| ... | NF_DENSITY | PIPELINE | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 1 docker container*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c1n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | pipeline_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index 0173645c21..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R2C
-| ... | NF_DENSITY | PIPELINE | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 2 docker containers*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c2n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | pipeline_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index 1addfb35fc..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R4C
-| ... | NF_DENSITY | PIPELINE | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 4 docker containers*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c4n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | pipeline_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index cbab163675..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R6C
-| ... | NF_DENSITY | PIPELINE | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 6 docker containers*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c6n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | pipeline_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index c2ceadb701..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R8C
-| ... | NF_DENSITY | PIPELINE | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 8 docker containers*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c8n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | pipeline_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-32memif-2chain-16dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-32memif-2chain-16dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index dfcb0955d6..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-32memif-2chain-16dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,124 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R8C
-| ... | NF_DENSITY | CHAIN | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 16 docker container*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c8n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-32memif-2chain-16dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-32memif-2chain-16dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc04-1518B-1c-eth-l2bd-32memif-2chain-16dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-32memif-2chain-16dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc07-9000B-1c-eth-l2bd-32memif-2chain-16dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-32memif-2chain-16dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc10-IMIX-1c-eth-l2bd-32memif-2chain-16dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-32memif-2chain-16dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-32memif-4chain-16dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-32memif-4chain-16dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index bc04e14394..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-32memif-4chain-16dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,124 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R4C
-| ... | NF_DENSITY | CHAIN | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 4 chains
-| ... | 16 docker container*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c4n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-32memif-4chain-16dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-32memif-4chain-16dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc04-1518B-1c-eth-l2bd-32memif-4chain-16dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-32memif-4chain-16dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc07-9000B-1c-eth-l2bd-32memif-4chain-16dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-32memif-4chain-16dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc10-IMIX-1c-eth-l2bd-32memif-4chain-16dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-32memif-4chain-16dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-32memif-8chain-16dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-32memif-8chain-16dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index 382ecc33f1..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-32memif-8chain-16dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,124 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 8R2C
-| ... | NF_DENSITY | CHAIN | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 8 chains
-| ... | 16 docker container*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c2n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-32memif-8chain-16dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-32memif-8chain-16dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc04-1518B-1c-eth-l2bd-32memif-8chain-16dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-32memif-8chain-16dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc07-9000B-1c-eth-l2bd-32memif-8chain-16dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-32memif-8chain-16dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc10-IMIX-1c-eth-l2bd-32memif-8chain-16dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-32memif-8chain-16dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index 57f68305f3..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R2C
-| ... | NF_DENSITY | CHAIN | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 2 docker container*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c2n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index 48e761aae7..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R1C
-| ... | NF_DENSITY | CHAIN | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 2 docker container*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c1n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index 73fd9ec345..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R6C
-| ... | NF_DENSITY | PIPELINE | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2
-| ... | pipelines 12 docker containers*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c6n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | pipeline_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-16dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-16dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index b3952b431d..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-16dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,124 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R8C
-| ... | NF_DENSITY | PIPELINE | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2
-| ... | pipelines 16 docker containers*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c8n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | pipeline_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-4memif-2pipe-16dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-4memif-2pipe-16dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc04-1518B-1c-eth-l2bd-4memif-2pipe-16dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-4memif-2pipe-16dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc07-9000B-1c-eth-l2bd-4memif-2pipe-16dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-4memif-2pipe-16dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc10-IMIX-1c-eth-l2bd-4memif-2pipe-16dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-4memif-2pipe-16dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index 542641b40f..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R1C
-| ... | NF_DENSITY | PIPELINE | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2
-| ... | pipelines 2 docker containers*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c1n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | pipeline_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index 2751869d82..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R2C
-| ... | NF_DENSITY | PIPELINE | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 2
-| ... | pipelines 4 docker containers*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c2n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | pipeline_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index 7acea9f09a..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R4C
-| ... | NF_DENSITY | PIPELINE | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2
-| ... | pipelines 8 docker containers*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c4n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | pipeline_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index 9bfd03487d..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R4C
-| ... | NF_DENSITY | CHAIN | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 4 docker container*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c4n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index f8dbac7762..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R2C
-| ... | NF_DENSITY | CHAIN | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 4 docker container*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c2n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index 1109713681..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R1C
-| ... | NF_DENSITY | CHAIN | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 4 chains
-| ... | 1 docker container*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c1n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4pipe-16dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4pipe-16dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index 3fe578fa3a..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4pipe-16dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,124 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R4C
-| ... | NF_DENSITY | PIPELINE | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4
-| ... | pipelines 16 docker containers*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c4n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | pipeline_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-8memif-4pipe-16dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-8memif-4pipe-16dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc04-1518B-1c-eth-l2bd-8memif-4pipe-16dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-8memif-4pipe-16dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc07-9000B-1c-eth-l2bd-8memif-4pipe-16dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-8memif-4pipe-16dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc10-IMIX-1c-eth-l2bd-8memif-4pipe-16dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-8memif-4pipe-16dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index b2f1cce3c0..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R1C
-| ... | NF_DENSITY | PIPELINE | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4
-| ... | pipelines 4 docker containers*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c1n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | pipeline_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr.robot
deleted file mode 100644
index 27cfe858ee..0000000000
--- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R2C
-| ... | NF_DENSITY | PIPELINE | NF_VPPIP4
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 2-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with MEMIF
-| Suite Teardown | Tear down 2-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords
-| ... | Tear down performance test
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4
-| ... | pipelines 8 docker containers*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| ${nic_name}= | Intel-X710
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c2n
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | pipeline_ip4
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers
-| | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False}
-| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}