aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/perf/container_memif
diff options
context:
space:
mode:
authorPeter Mikus <pmikus@cisco.com>2018-03-14 16:59:04 +0100
committerPeter Mikus <pmikus@cisco.com>2018-03-16 13:17:30 +0000
commitfdf235ec30b409daef533c5258e2bfbe506c49f8 (patch)
treef1b2d3b6c85ee194610433fa9f660c6ac16a306b /tests/vpp/perf/container_memif
parent237ac98ad0cca7a24e3f38ec9f8b73c106a8b00a (diff)
Add vhost and memif MRR suite
Change-Id: Iaded13af82383955c2ff093ddc96e09682d95776 Signed-off-by: Peter Mikus <pmikus@cisco.com>
Diffstat (limited to 'tests/vpp/perf/container_memif')
-rw-r--r--tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot5
-rw-r--r--tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1dcr-mrr.robot5
-rw-r--r--tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-mrr.robot3
-rw-r--r--tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot160
-rw-r--r--tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot159
5 files changed, 324 insertions, 8 deletions
diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot
index 760e8458e1..d3aefb6fae 100644
--- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot
+++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot
@@ -43,11 +43,10 @@
| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
| ... | at line rate and reports total received/sent packets over trial period.
| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
| ... | flow-group) with all packets containing Ethernet header, IPv4 header
| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
| ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
# X520-DA2 bandwidth limit
@@ -154,4 +153,4 @@
| | ...
| | [Tags] | 1518B | 2T2C | MTHREAD
| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc
-| | framesize=${1518} | wt=2 | rxq=1 \ No newline at end of file
+| | framesize=${1518} | wt=2 | rxq=1
diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1dcr-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1dcr-mrr.robot
index b157663ae3..5c5062424a 100644
--- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1dcr-mrr.robot
+++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1dcr-mrr.robot
@@ -43,11 +43,10 @@
| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
| ... | at line rate and reports total received/sent packets over trial period.
| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
| ... | flow-group) with all packets containing Ethernet header, IPv4 header
| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
| ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
# X520-DA2 bandwidth limit
@@ -154,4 +153,4 @@
| | ...
| | [Tags] | 1518B | 2T2C | MTHREAD
| | [Template] | Check RR for l2xcbase-eth-2memif-1dcr
-| | framesize=${1518} | wt=2 | rxq=1 \ No newline at end of file
+| | framesize=${1518} | wt=2 | rxq=1
diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-mrr.robot
index 8d8c96979c..4b347b478d 100644
--- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-mrr.robot
+++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-mrr.robot
@@ -42,11 +42,10 @@
| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
| ... | at line rate and reports total received/sent packets over trial period.
| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
| ... | flow-group) with all packets containing Ethernet header, IPv4 header
| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
| ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
# X520-DA2 bandwidth limit
diff --git a/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot b/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot
new file mode 100644
index 0000000000..a167ae4e9e
--- /dev/null
+++ b/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot
@@ -0,0 +1,160 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-XL710 | ETH | L2BDMACLRN | BASE | MEMIF | LXC
+| ...
+| Suite Setup | Run Keywords
+| ... | Set up 3-node performance topology with DUT's NIC model | L2
+| ... | Intel-XL710
+| ... | AND | Set up performance test suite with MEMIF
+| ... | AND | Set up performance topology with containers
+| ...
+| Suite Teardown | Tear down 3-node performance topology with container
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results L2BD test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2
+| ... | bridge domains and MAC learning enabled. LXC is connected to VPP via
+| ... | Memif interface. LXC is running same VPP version as running on DUT. LXC
+| ... | is limited via cgroup to use 3 cores allocated from pool of isolated
+| ... | CPUs. There are no memory constraints. DUT1 and DUT2 tested with
+| ... | 2p40GE NIC XL710 Niantic by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+
+*** Variables ***
+# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
+| ${s_24.5G} | ${24500000000}
+# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
+| ${s_18.75Mpps} | ${18750000}
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+# LXC container
+| ${container_count}= | ${1}
+| ${container_engine}= | LXC
+| ${container_image}= | ${EMPTY}
+# CPU settings
+| ${system_cpus}= | ${1}
+| ${vpp_cpus}= | ${5}
+| ${container_cpus}= | ${3}
+
+*** Keywords ***
+| Check RR for l2bdbasemaclrn-eth-2memif-1lxc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread(s), ${wt}\
+| | ... | phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${framesize} | ${wt} | ${rxq}
+| | ...
+| | # Test Variables required for test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${get_framesize}
+| | ${max_rate}= | Set Variable If
+| | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Initialize L2 Bridge Domain for '1' memif pairs in 3-node circular topology
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD
+| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc
+| | framesize=${64} | wt=1 | rxq=1
+
+| tc02-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc
+| | framesize=IMIX_v4_1 | wt=1 | rxq=1
+
+| tc03-1518B-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc
+| | framesize=${1518} | wt=1 | rxq=1
+
+| tc04-64B-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD
+| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc
+| | framesize=${64} | wt=2 | rxq=1
+
+| tc05-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate forIMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc
+| | framesize=IMIX_v4_1 | wt=2 | rxq=1
+
+| tc06-1518B-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc
+| | framesize=${1518} | wt=2 | rxq=1
diff --git a/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot b/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot
new file mode 100644
index 0000000000..e0964741b6
--- /dev/null
+++ b/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot
@@ -0,0 +1,159 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-XL710 | ETH | L2XCFWD | BASE | MEMIF | LXC
+| ...
+| Suite Setup | Run Keywords
+| ... | Set up 3-node performance topology with DUT's NIC model | L2
+| ... | Intel-XL710
+| ... | AND | Set up performance test suite with MEMIF
+| ... | AND | Set up performance topology with containers
+| ...
+| Suite Teardown | Tear down 3-node performance topology with container
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results L2XC test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
+| ... | connect. DUT1 and DUT2 tested with 2p40GE NIC XL710 by Intel.
+| ... | LXC is connected to VPP via Memif interface. LXC is running same VPP
+| ... | version as running on DUT. LXC is limited via cgroup to use 3 cores
+| ... | allocated from pool of isolated CPUs. There are no memory contraints.
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+
+*** Variables ***
+# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
+| ${s_24.5G} | ${24500000000}
+# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
+| ${s_18.75Mpps} | ${18750000}
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+# LXC container
+| ${container_count}= | ${1}
+| ${container_engine}= | LXC
+| ${container_image}= | ${EMPTY}
+# CPU settings
+| ${system_cpus}= | ${1}
+| ${vpp_cpus}= | ${5}
+| ${container_cpus}= | ${3}
+
+*** Keywords ***
+| Check RR for l2xcbase-eth-2memif-1lxc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread(s), ${wt}\
+| | ... | phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${framesize} | ${wt} | ${rxq}
+| | ...
+| | # Test Variables required for test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${get_framesize}
+| | ${max_rate}= | Set Variable If
+| | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Initialize L2 xconnect for '1' memif pairs in 3-node circular topology
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD
+| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc
+| | framesize=${64} | wt=1 | rxq=1
+
+| tc02-IMIX-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc
+| | framesize=IMIX_v4_1 | wt=1 | rxq=1
+
+| tc03-1518B-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc
+| | framesize=${1518} | wt=1 | rxq=1
+
+| tc04-64B-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD
+| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc
+| | framesize=${64} | wt=2 | rxq=1
+
+| tc05-IMIX-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate forIMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc
+| | framesize=IMIX_v4_1 | wt=2 | rxq=1
+
+| tc06-1518B-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc
+| | framesize=${1518} | wt=2 | rxq=1