csit - Integration tests

diff options

author	Dave Wallace <dwallacelf@gmail.com>	2020-01-21 19:02:14 +0000
committer	Vratko Polak <vrpolak@cisco.com>	2020-01-28 14:35:46 +0000
commit	b340b5c9925b43869b91197850504760757a0bfe (patch)
tree	f95b3f6c94b1385443458252e52b711099414da3 /tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
parent	0c6d1142326b6953b972733c4fa3bddf078ec802 (diff)

perf: hoststack iperf3 test tuning

Change-Id: I53425f57fe9ecef9cff2c94642cc7cb24537a961 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>

Diffstat (limited to 'tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot')

0 files changed, 0 insertions, 0 deletions

# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. *** Settings *** | Resource | resources/libraries/robot/performance/performance_setup.robot | Resource | resources/libraries/robot/l2/tagging.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK | ... | NIC_Intel-X520-DA2 | L2XCFWD | BASE | DOT1AD | ... | Suite Setup | Set up 3-node performance topology with DUT's NIC model | ... | L2 | Intel-X520-DA2 | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test | Test Teardown | Tear down performance ndrchk test | ... | Documentation | *Reference NDR throughput L2XC with 802.1ad verify test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 xconnect. | ... | 802.1ad tagging is applied on link between DUT1 and DUT2 with inner 4B | ... | vlan tag (id=100) and outer 4B vlan tag (id=200). | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- | ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. | ... | *[Ver] TG verification:* In short performance tests, TG verifies | ... | DUTs' throughput at ref-NDR (reference Non Drop Rate) with zero packet | ... | loss tolerance. Ref-NDR value is periodically updated acording to | ... | formula: ref-NDR = 0.9x NDR, where NDR is found in RFC2544 long | ... | performance tests for the same DUT configuration. Test packets are | ... | generated by TG on links to DUTs. TG traffic profile contains two L3 | ... | flow-groups (flow-group per direction, 253 flows per flow-group) with | ... | all packets containing Ethernet header, IPv4 header with IP protocol=61 | ... | and static payload. MAC addresses are matching MAC addresses of the | ... | TG node interfaces. | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** | ${subid}= | 10 | ${outer_vlan_id}= | 100 | ${inner_vlan_id}= | 200 | ${type_subif}= | two_tags | ${tag_rewrite}= | pop-2 # Traffic profile: | ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 *** Test Cases *** | tc01-64B-1t1c-dot1ad-l2xcbase-ndrchk | | [Documentation] | | ... | [Cfg] DUT runs L2XC with 802.1ad config with 1 thread, 1 phy core, \ | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte | | ... | frames using single trial throughput test at 2x 4.0mpps. | | [Tags] | 64B | 1T1C | STHREAD | | ${framesize}= | Set Variable | ${64} | | ${rate}= | Set Variable | 4.0mpps | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up | | When Initialize VLAN sub-interfaces in 3-node circular topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif} | | And Configure L2 tag rewrite method on interfaces | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} | | ... | ${tag_rewrite} | | And Connect interfaces and VLAN sub-interfaces using L2XC | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} | | ... | ${framesize} | ${traffic_profile} | tc02-1514B-1t1c-dot1ad-l2xcbase-ndrchk | | [Documentation] | | ... | [Cfg] DUT runs L2XC with 802.1ad config with 1 thread, 1 phy core, \ | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1514 Byte | | ... | frames using single trial throughput test at 2x 810635pps. | | [Tags] | 1514B | 1T1C | STHREAD | | ${framesize}= | Set Variable | ${1514} | | ${rate}= | Set Variable | 810635pps | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up | | When Initialize VLAN sub-interfaces in 3-node circular topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif} | | And Configure L2 tag rewrite method on interfaces | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} | | ... | ${tag_rewrite} | | And Connect interfaces and VLAN sub-interfaces using L2XC | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} | | ... | ${framesize} | ${traffic_profile} | tc03-9000B-1t1c-dot1ad-l2xcbase-ndrchk | | [Documentation] | | ... | [Cfg] DUT runs L2XC with 802.1ad config with 1 thread, 1 phy core, \ | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte | | ... | frames using single trial throughput test at 2x 138458pps. | | [Tags] | 9000B | 1T1C | STHREAD | | ${framesize}= | Set Variable | ${9000} | | ${rate}= | Set Variable | 138458pps | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up | | When Initialize VLAN sub-interfaces in 3-node circular topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif} | | And Configure L2 tag rewrite method on interfaces | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} | | ... | ${tag_rewrite} | | And Connect interfaces and VLAN sub-interfaces using L2XC | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} | | ... | ${framesize} | ${traffic_profile} | tc04-64B-2t2c-dot1ad-l2xcbase-ndrchk | | [Documentation] | | ... | [Cfg] DUT runs L2XC with 802.1ad config with 2 thread, 2 phy core, \ | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte | | ... | frames using single trial throughput test at 2x 8.5mpps. | | [Tags] | 64B | 2T2C | MTHREAD | | ${framesize}= | Set Variable | ${64} | | ${rate}= | Set Variable | 8.5mpps | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up | | When Initialize VLAN sub-interfaces in 3-node circular topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif} | | And Configure L2 tag rewrite method on interfaces | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} | | ... | ${tag_rewrite} | | And Connect interfaces and VLAN sub-interfaces using L2XC | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} | | ... | ${framesize} | ${traffic_profile} | tc05-1514B-2t2c-dot1ad-l2xcbase-ndrchk | | [Documentation] | | ... | [Cfg] DUT runs L2XC with 802.1ad config with 2 thread, 2 phy core, \ | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1514 Byte | | ... | frames using single trial throughput test at 2x 810635pps. | | [Tags] | 1514B | 2T2C | MTHREAD | | ${framesize}= | Set Variable | ${1514} | | ${rate}= | Set Variable | 810635pps | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up | | When Initialize VLAN sub-interfaces in 3-node circular topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif} | | And Configure L2 tag rewrite method on interfaces | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} | | ... | ${tag_rewrite} | | And Connect interfaces and VLAN sub-interfaces using L2XC | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} | | ... | ${framesize} | ${traffic_profile} | tc06-9000B-2t2c-dot1ad-l2xcbase-ndrchk | | [Documentation] | | ... | [Cfg] DUT runs L2XC with 802.1ad config with 2 thread, 2 phy core, \ | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte | | ... | frames using single trial throughput test at 2x 138458pps. | | [Tags] | 9000B | 2T2C | MTHREAD | | ${framesize}= | Set Variable | ${9000} | | ${rate}= | Set Variable | 138458pps | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up | | When Initialize VLAN sub-interfaces in 3-node circular topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif} | | And Configure L2 tag rewrite method on interfaces | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} | | ... | ${tag_rewrite} | | And Connect interfaces and VLAN sub-interfaces using L2XC | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} | | ... | ${framesize} | ${traffic_profile} | tc07-64B-4t4c-dot1ad-l2xcbase-ndrchk | | [Documentation] | | ... | [Cfg] DUT runs L2XC with 802.1ad config with 4 thread, 4 phy core, \ | | ... | 2 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte | | ... | frames using single trial throughput test at 2x 8.6mpps. | | [Tags] | 64B | 4T4C | MTHREAD | | ${framesize}= | Set Variable | ${64} | | ${rate}= | Set Variable | 8.6mpps | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up | | When Initialize VLAN sub-interfaces in 3-node circular topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif} | | And Configure L2 tag rewrite method on interfaces | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} | | ... | ${tag_rewrite} | | And Connect interfaces and VLAN sub-interfaces using L2XC | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} | | ... | ${framesize} | ${traffic_profile} | tc08-1514B-4t4c-dot1ad-l2xcbase-ndrchk | | [Documentation] | | ... | [Cfg] DUT runs L2XC with 802.1ad config with 4 thread, 4 phy core, \ | | ... | 2 receive queue per NIC port. [Ver] Verify ref-NDR for 1514 Byte | | ... | frames using single trial throughput test at 2x 810635pps. | | [Tags] | 1514B | 4T4C | MTHREAD | | ${framesize}= | Set Variable | ${1514} | | ${rate}= | Set Variable | 810635pps | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up | | When Initialize VLAN sub-interfaces in 3-node circular topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif} | | And Configure L2 tag rewrite method on interfaces | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} | | ... | ${tag_rewrite} | | And Connect interfaces and VLAN sub-interfaces using L2XC | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} | | ... | ${framesize} | ${traffic_profile} | tc09-9000B-4t4c-dot1ad-l2xcbase-ndrchk | | [Documentation] | | ... | [Cfg] DUT runs L2XC with 802.1ad config with 4 thread, 4 phy core, \ | | ... | 2 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte | | ... | frames using single trial throughput test at 2x 138458pps. | | [Tags] | 9000B | 4T4C | MTHREAD | | ${framesize}= | Set Variable | ${9000} | | ${rate}= | Set Variable | 138458pps | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up | | When Initialize VLAN sub-interfaces in 3-node circular topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif} | | And Configure L2 tag rewrite method on interfaces | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} | | ... | ${tag_rewrite} | | And Connect interfaces and VLAN sub-interfaces using L2XC | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} | | ... | ${framesize} | ${traffic_profile}


context:
space:
mode: