IPsec: add 2n crypto udir perf tests

Add unidirectional 2n crypto tests. Only one direction can be tested on
a 2 node topology, since we can't use the same interface for both
encrypted and unencrypted traffic. Add the following tests:
* {n}tnlsw-ip4base-int ndrpdr tests
* {n}tnlsw-1atnl-ip4base-int reconf tests
* {n}tnlswasync-scheduler-ip4base-int ndrpdr tests

Where n is the number of tunnels:
1, 4, 40, 400, 1000, 5000, 10000, 20000, 40000, 60000 for the first two
1, 2, 4, 8 for the async scheduler tests

All of these with the following ecryption-auth algorithms:
aes128gcm
aes256gcm
aes128cbc-hmac256sha
aes128cbc-hmac512sha

Also add the corresponding trex profiles:
trex-stl-2n-ethip4-ip4dst{n}-udir.py

Where n is the number of tunnels listed above. The profiles are shared
among the tests.

Change-Id: I22bb46e6ad59801581a78aa19310bee8a5293e56
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>

1 files changed, 168 insertions, 0 deletions

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot
new file mode 100644
index 0000000000..1fdf4cd234
--- /dev/null
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot
@@ -0,0 +1,168 @@
+# Copyright (c) 2021 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/crypto/ipsec.robot
+|
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF
+| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_20000
+| ... | AES_256_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir
+|
+| Suite Setup | Setup suite topology interfaces | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance | ipsec_sa
+|
+| Test Template | Local Template
+|
+| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
+| ... | Eth-IPv4-IPSec on DUT1-TG
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... | and sends back to TG.
+| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\
+| ... | with zero packet loss tolerance, then measures loss at this load\
+| ... | while additional tunnels are configured.\
+| ... | Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains one L3 flow-groups
+| ... | (flow-group per direction, number of flows per flow-group equals to
+| ... | number of IPSec tunnels) with all packets
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
+| ... | static payload. MAC addresses are matching MAC addresses of the TG
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| ... | is applied to the stream.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so
+| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.2
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${tun_if1_ip4}= | 100.0.0.1
+| ${tun_if2_ip4}= | 200.0.0.2
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_tunnels}= | ${20000}
+| ${n_added_tunnels}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir
+| ${traffic_directions}= | ${1}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure packet loss during reconfig at NDR load.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${NONE}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels}
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize IPSec in 2-node circular topology
+| | And VPP IPsec Create Tunnel Interfaces
+| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0]
+| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
+| | Start Traffic on Background | ${unidirectional_throughput}
+| | And VPP IPsec Create Tunnel Interfaces
+| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0]
+| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels}
+| | ${result}= | Stop Running Traffic
+| | Display Reconfig Test Message | ${result}
+
+*** Test Cases ***
+| 64B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| 64B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| 64B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| 1518B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| IMIX-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}