Add ipsec policy test suites with flow director or rss accelerated

The test scenario is about two private networks which communication was
protected by ipsec.

The test suites are to show performance impovement about ipsec esp flow
lookup that offloaded by NIC flow director and rss.

Verified on 3n-clx and Intel E810 NIC environment, with 64B ipsec packet
flow, performance improved ~31% with 1C2T, ~110% with 2C4T, ~250% with 4C8T.

Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com>
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Change-Id: I30aec8c5115e5a6fbef88c11d1bef2624029d1b9
(cherry picked from commit f7ee014dee09b4089924342b0fe5654b2fe91e90)

3 files changed, 535 insertions, 0 deletions

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr.robot
new file mode 100644
index 0000000000..abb061975c
--- /dev/null
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr.robot
@@ -0,0 +1,173 @@
+# Copyright (c) 2022 Intel and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/crypto/ipsec.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000
+| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | SCALE
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm
+|
+| Suite Setup | Setup suite topology interfaces | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance | ipsec_sa
+|
+| Test Template | Local Template
+|
+| Documentation | **IPv4 IPsec tunnel mode performance test suite.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels which shared same tunnel src and dst ip \
+| ... | address. DUTs get IPv4 traffic from TG, encrypt it and send to \
+| ... | another DUT, where packets are decrypted and sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | is applied to both streams.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ... | crypto_native_plugin.so
+| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.11
+| ${dut1_if2_ip4}= | 100.0.0.1
+| ${dut2_if1_ip4}= | 200.0.0.102
+| ${dut2_if2_ip4}= | 192.168.20.11
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_tunnels}= | ${1000}
+# Traffic profile:
+| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - search_type - NDR or PDR. Type: string
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ... | - min_rate - Min rate for binary search, default value: ${50000}.
+| | ... | Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${NONE}
+| | ${ipsec_proto}= | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize IPSec in 3-node circular topology
+| | And VPP IPsec Add Multiple Tunnels
+| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels}
+| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${False}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| 64B-1c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| 64B-2c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| 64B-4c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| 1518B-1c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| IMIX-4c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr.robot
new file mode 100644
index 0000000000..cb52b131ba
--- /dev/null
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr.robot
@@ -0,0 +1,182 @@
+# Copyright (c) 2022 Intel and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/crypto/ipsec.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000
+| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | FLOW_DIR | NIC_Intel-X710 | SCALE
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm
+|
+| Suite Setup | Setup suite topology interfaces | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance | ipsec_sa
+|
+| Test Template | Local Template
+|
+| Documentation | **IPv4 IPsec tunnel mode performance test suite.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels which shared same tunnel src and dst ip \
+| ... | address, enabled IPsec_ESP flow director between them.\
+| ... | DUTs get IPv4 traffic from TG, encrypt it and send to another \
+| ... | DUT, where packets are decrypted and sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | is applied to both streams.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ... | crypto_native_plugin.so
+| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.11
+| ${dut1_if2_ip4}= | 100.0.0.1
+| ${dut2_if1_ip4}= | 200.0.0.102
+| ${dut2_if2_ip4}= | 192.168.20.11
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${dut1_spi}= | ${400000}
+| ${dut2_spi}= | ${300000}
+| ${n_tunnels}= | ${1000}
+# Traffic profile:
+| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - search_type - NDR or PDR. Type: string
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ... | - min_rate - Min rate for binary search, default value: ${50000}.
+| | ... | Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${NONE}
+| | ${ipsec_proto}= | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize IPSec in 3-node circular topology
+| | And VPP Create Ipsec Flows On Dut
+| | ... | ${dut1} | ${n_tunnels} | ${rxq_count_int} | ${dut1_spi}
+| | ... | ${DUT1_${int}2}[0]
+| | And VPP Create Ipsec Flows On Dut
+| | ... | ${dut2} | ${n_tunnels} | ${rxq_count_int} | ${dut2_spi}
+| | ... | ${DUT2_${int}1}[0]
+| | And VPP IPsec Add Multiple Tunnels
+| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels}
+| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${False}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| 64B-1c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| 64B-2c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| 64B-4c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| 1518B-1c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| IMIX-4c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr.robot
new file mode 100644
index 0000000000..17fc6bd76b
--- /dev/null
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr.robot
@@ -0,0 +1,180 @@
+# Copyright (c) 2022 Intel and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/crypto/ipsec.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000
+| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | FLOW_RSS | NIC_Intel-X710 | SCALE
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm
+|
+| Suite Setup | Setup suite topology interfaces | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance | ipsec_sa
+|
+| Test Template | Local Template
+|
+| Documentation | **IPv4 IPsec tunnel mode performance test suite.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels which shared same tunnel src and dst ip \
+| ... | address, enabled flow rss action between them.\
+| ... | DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, \
+| ... | where packets are decrypted and sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | is applied to both streams.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ... | crypto_native_plugin.so
+| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.11
+| ${dut1_if2_ip4}= | 100.0.0.1
+| ${dut2_if1_ip4}= | 200.0.0.102
+| ${dut2_if2_ip4}= | 192.168.20.11
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_tunnels}= | ${1000}
+# Traffic profile:
+| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - search_type - NDR or PDR. Type: string
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ... | - min_rate - Min rate for binary search, default value: ${50000}.
+| | ... | Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${NONE}
+| | ${ipsec_proto}= | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize IPSec in 3-node circular topology
+| | ${flow_index} = | And VPP Ipsec Flow Enale Rss
+| | ... | ${dut1} | IPSEC_ESP | esp | default
+| | And VPP Flow Enable | ${dut1} | ${DUT1_${int}2}[0] | ${flow_index}
+| | ${flow_index} = | And VPP Ipsec Flow Enale Rss
+| | ... | ${dut2} | IPSEC_ESP | esp | default
+| | And VPP Flow Enable | ${dut2} | ${DUT2_${int}1}[0] | ${flow_index}
+| | And VPP IPsec Add Multiple Tunnels
+| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels}
+| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${False}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| 64B-1c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| 64B-2c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| 64B-4c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| 1518B-1c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| IMIX-4c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}