Add: 2-node ip4 oacl tests

Change-Id: I786fe9f75777e1cd0daee70bc350185dd7fd17e1
Signed-off-by: Jan Gelety <jgelety@cisco.com>

1 files changed, 144 insertions, 0 deletions

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot
new file mode 100644
index 0000000000..6aebe2decc
--- /dev/null
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot
@@ -0,0 +1,144 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
+| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS
+| ... | OACL | ACL50 | 10K_FLOWS
+| ...
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | acl
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing.\
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
+| ... | DUT1 is tested with ${nic_name}.\
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
+| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
+| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
+| ... | header with IP protocol=61 and static payload. MAC addresses are\
+| ... | matching MAC addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
+| ${osi_layer}= | L3
+| ${nic_name}= | Intel-X710
+| ${overhead}= | ${0}
+# ACL test setup
+| ${acl_action}= | permit
+| ${acl_apply_type}= | output
+| ${no_hit_aces_number}= | 50
+| ${flows_per_dir}= | 10k
+| ${ip_nr}= | ${10}
+# starting points for non-hitting ACLs
+| ${src_ip_start}= | 30.30.30.1
+| ${dst_ip_start}= | 40.40.40.1
+| ${ip_step}= | ${1}
+| ${sport_start}= | ${1000}
+| ${dport_start}= | ${1000}
+| ${port_step}= | ${1}
+| ${trex_stream1_subnet}= | 10.10.10.0/24
+| ${trex_stream2_subnet}= | 20.20.20.0/24
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-2n-ethip4udp-10u1000p-conc
+
+*** Keywords ***
+| Local Template
+| | ...
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add PCI devices to all DUTs
+| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc07-9000B-1c-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| tc08-9000B-2c-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| tc09-9000B-4c-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}