doc: fixing documentation structure

When building documentation using sphinx we see ~1200 similar warnings [0]
[0] - https://s3-logs.fd.io/vex-yul-rot-jenkins-1/csit-verify-tox-master-ubuntu2004-x86_64/3289/doc_verify.log.gz

These warning are harmless and can be fixed later

Signed-off-by: Viliam Luc <vluc@cisco.com>
Change-Id: I1ac1099d38935971d47491dde905715345d3935c

1 files changed, 30 insertions, 22 deletions

diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot
index 1f650bc4df..34b6170257 100644
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot
@@ -27,27 +27,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4
-| ... | test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-Dot1Q-IPv4 for L2 switching of IPv4\
+| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q and \
+| ... | VXLANoIPv4 test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-Dot1Q-IPv4 for L2 switching of \
+| ... | IPv4. \
 | ... | on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with 100 L2\
-| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and\
-| ... | DUT2. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k\
-| ... | flows per flow-group) with all packets containing Ethernet header, IEEE\
-| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload.\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with 100 \
+| ... | L2 \
+| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and \
+| ... | DUT2. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k \
+| ... | flows per flow-group) with all packets containing Ethernet header, \
+| ... | IEEE \
+| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -69,9 +77,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2BD forwarding config with VLAN and VXLAN and\
-| | ... | uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs L2BD forwarding config with VLAN and \
+| | ... | VXLAN and uses ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).