doc: fixing documentation structure

When building documentation using sphinx we see ~1200 similar warnings [0]
[0] - https://s3-logs.fd.io/vex-yul-rot-jenkins-1/csit-verify-tox-master-ubuntu2004-x86_64/3289/doc_verify.log.gz

These warning are harmless and can be fixed later

Signed-off-by: Viliam Luc <vluc@cisco.com>
Change-Id: I1ac1099d38935971d47491dde905715345d3935c

15 files changed, 411 insertions, 323 deletions

diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot
index 1f650bc4df..34b6170257 100644
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot
@@ -27,27 +27,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4
-| ... | test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-Dot1Q-IPv4 for L2 switching of IPv4\
+| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q and \
+| ... | VXLANoIPv4 test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-Dot1Q-IPv4 for L2 switching of \
+| ... | IPv4. \
 | ... | on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with 100 L2\
-| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and\
-| ... | DUT2. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k\
-| ... | flows per flow-group) with all packets containing Ethernet header, IEEE\
-| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload.\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with 100 \
+| ... | L2 \
+| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and \
+| ... | DUT2. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k \
+| ... | flows per flow-group) with all packets containing Ethernet header, \
+| ... | IEEE \
+| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -69,9 +77,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2BD forwarding config with VLAN and VXLAN and\
-| | ... | uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs L2BD forwarding config with VLAN and \
+| | ... | VXLAN and uses ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot
index cf08ca9287..22021e1043 100644
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4
-| ... | test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-Dot1Q-IPv4 for L2 switching of IPv4\
+| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q and \
+| ... | VXLANoIPv4 test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-Dot1Q-IPv4 for L2 switching of \
+| ... | IPv4. \
 | ... | on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with 10 L2\
-| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and\
-| ... | DUT2. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k\
-| ... | flows per flow-group) with all packets containing Ethernet header, IEEE\
-| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload.\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with 10 L2 \
+| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and \
+| ... | DUT2. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k \
+| ... | flows per flow-group) with all packets containing Ethernet header, \
+| ... | IEEE \
+| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -69,9 +76,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2BD forwarding config with VLAN and VXLAN and\
-| | ... | uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs L2BD forwarding config with VLAN and \
+| | ... | VXLAN and uses ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot
index 37de1ec357..07050239d7 100644
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4
-| ... | test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-Dot1Q-IPv4 for L2 switching of IPv4\
+| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q and \
+| ... | VXLANoIPv4 test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-Dot1Q-IPv4 for L2 switching of \
+| ... | IPv4. \
 | ... | on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with 1k L2\
-| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and\
-| ... | DUT2. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k\
-| ... | flows per flow-group) with all packets containing Ethernet header, IEEE\
-| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload.\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with 1k L2 \
+| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and \
+| ... | DUT2. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k \
+| ... | flows per flow-group) with all packets containing Ethernet header, \
+| ... | IEEE \
+| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -68,9 +75,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2BD forwarding config with VLAN and VXLAN and\
-| | ... | uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs L2BD forwarding config with VLAN and \
+| | ... | VXLAN and uses ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot
index 47f9da84b5..ed036a3363 100644
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4
-| ... | test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-Dot1Q-IPv4 for L2 switching of IPv4\
+| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q and \
+| ... | VXLANoIPv4 test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-Dot1Q-IPv4 for L2 switching of \
+| ... | IPv4. \
 | ... | on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with 1 L2\
-| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and\
-| ... | DUT2. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k\
-| ... | flows per flow-group) with all packets containing Ethernet header, IEEE\
-| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload.\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with 1 L2 \
+| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and \
+| ... | DUT2. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k \
+| ... | flows per flow-group) with all packets containing Ethernet header, \
+| ... | IEEE \
+| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -68,9 +75,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2BD forwarding config with VLAN and VXLAN and\
-| | ... | uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs L2BD forwarding config with VLAN and \
+| | ... | VXLAN and uses ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4gtpusw-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4gtpusw-ip4base-ndrpdr.robot
index 0c4d5b3f74..743a2ec8aa 100644
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4gtpusw-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4gtpusw-ip4base-ndrpdr.robot
@@ -27,25 +27,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput gtpu test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-GTPU on DUT1-DUT2,\
+| Documentation | **RFC2544: Pkt throughput gtpu test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-GTPU on DUT1-DUT2, \
 | ... | Eth-IPv4 on TG-DUTn for IPv4 routing over GTPU tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and static routes. GTPU tunnel is configured between DUT1\
-| ... | and DUT2. DUT1 and DUT2 tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups with all packets containing Ethernet\
-| ... | header, IPv4 header with IP protocol=61 and static payload. MAC\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and static routes. GTPU tunnel is configured between DUT1 \
+| ... | and DUT2. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups with all packets containing Ethernet \
+| ... | header, IPv4 header with IP protocol=61 and static payload. MAC \
 | ... | addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | gtpu_plugin.so
@@ -65,9 +70,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs Gtpu hw offload routing config.\
+| | ... | - **[Cfg]** DUT runs Gtpu hw offload routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot
index ba594f7aca..687e3e1ba7 100644
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot
@@ -30,26 +30,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput Lisp test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4 on DUT1-DUT2,\
+| Documentation | **RFC2544: Pkt throughput Lisp test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-LISP-IPv4 on DUT1-DUT2, \
 | ... | Eth-IPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and static routes. LISPoIPv4 tunnel is configured between DUT1\
-| ... | and DUT2. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and static routes. LISPoIPv4 tunnel is configured between DUT1 \
+| ... | and DUT2. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
 | ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC6830.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so
@@ -68,10 +73,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters\
-| | ... | config.
+| | ... | - **[Cfg]** DUT runs IPv4 LISP remote static mappings and whitelist \
+| | ... | filters config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot
index 32e270a13f..3b74615119 100644
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot
@@ -30,26 +30,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput Lisp test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv6 on DUT1-DUT2,\
+| Documentation | **RFC2544: Pkt throughput Lisp test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-LISP-IPv6 on DUT1-DUT2, \
 | ... | Eth-IPv4 on TG-DUTn for IPv4 routing over LISPoIPv6 tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and static routes. LISPoIPv6 tunnel is configured between DUT1\
-| ... | and DUT2. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and static routes. LISPoIPv6 tunnel is configured between DUT1 \
+| ... | and DUT2. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
 | ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC6830.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so
@@ -68,10 +73,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters\
-| | ... | config.
+| | ... | - **[Cfg]** DUT runs IPv6 LISP remote static mappings and whitelist \
+| | ... | filters config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot
index b1692c7877..3b2bd801a6 100644
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot
@@ -27,26 +27,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD with VXLANoIPv4 test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4 on\
+| Documentation | **RFC2544: Pkt throughput L2BD with VXLANoIPv4 test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4 \
+| ... | on \
 | ... | TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge\
-| ... | domain. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2.\
-| ... | DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 
+| ... | bridge-\
+| ... | domain. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -65,9 +72,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2BD forwarding config with VXLAN and uses\
+| | ... | - **[Cfg]** Each DUT runs L2BD forwarding config with VXLAN and uses \
 | | ... | ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot
index f540c9c9e1..5a94a7b350 100644
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot
@@ -27,26 +27,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2XC with VXLANoIPv4 test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross-connect on TG-DUTn.
-| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
-| ... | connect. VXLAN tunnels are configured between L2XCs on DUT1 and DUT2.
-| ... | DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| Documentation | **RFC2544: Pkt throughput L2XC with VXLANoIPv4 test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross-connect on \
+| ... | TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between \
+| ... | DUT1 and DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
+| ... | cross- connect. VXLAN tunnels are configured between L2XCs on DUT1 \
+| ... | and DUT2. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
 | ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -65,9 +71,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2XC forwarding config.
+| | ... | - **[Cfg]** DUT runs L2XC forwarding config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1024tun-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1024tun-ip4base-ndrpdr.robot
index e8c12d3e94..e102e84430 100644
--- a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1024tun-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1024tun-ip4base-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput GENEVE tunnel L3 mode performance
-| ... | test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput GENEVE tunnel L3 mode performance \
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\
-| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\
-| ... | routing over GENEVE tunnels.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\
-| ... | ${n_tunnels} GENEVE tunnels and ${${4} * ${n_tunnels}} static IPv4 /24\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \
+| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \
+| ... | for IPv4 routing over GENEVE tunnels.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | over ${n_tunnels} GENEVE tunnels and ${${4} ** ${n_tunnels}} static \
+| ... | IPv4 /24 \
 | ... | route entries. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC791, RFC768,
-| ... | RFC8926.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC791, \
+| ... | RFC768 and RFC8926.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so
@@ -81,9 +87,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration.
+| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-16tun-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-16tun-ip4base-ndrpdr.robot
index 68ac42d623..e99117ba82 100644
--- a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-16tun-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-16tun-ip4base-ndrpdr.robot
@@ -28,29 +28,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput GENEVE tunnel L3 mode performance
-| ... | test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput GENEVE tunnel L3 mode performance \
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\
-| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\
-| ... | routing over GENEVE tunnels.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\
-| ... | ${n_tunnels} GENEVE tunnels and ${${4} * ${n_tunnels}} static IPv4 /24\
-| ... | route entries. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \
+| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \
+| ... | for IPv4 routing over GENEVE tunnels.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | over ${n_tunnels} GENEVE tunnels and ${${4} ** ${n_tunnels}} static \
+| ... | IPv4 /24 route entries. DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC791, RFC768,
-| ... | RFC8926.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC791, \
+| ... | RFC768 and RFC8926.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so
@@ -81,9 +86,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration.
+| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-ndrpdr.robot
index 291fb98659..f0624a207e 100644
--- a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-ndrpdr.robot
@@ -28,29 +28,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput GENEVE tunnel L3 mode performance
-| ... | test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput GENEVE tunnel L3 mode performance \
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\
-| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\
-| ... | routing over GENEVE tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\
-| ... | GENEVE tunnel and 4 static IPv4 /24 route entries.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \
+| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \
+| ... | for IPv4 routing over GENEVE tunnel.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | over GENEVE tunnel and 4 static IPv4 /24 route entries. \
 | ... | DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC791, RFC768,
-| ... | RFC8926.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC791, \
+| ... | RFC768 and RFC8926.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so
@@ -81,9 +86,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration.
+| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-256tun-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-256tun-ip4base-ndrpdr.robot
index 00b5db7b2e..aae9332a0f 100644
--- a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-256tun-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-256tun-ip4base-ndrpdr.robot
@@ -28,29 +28,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput GENEVE tunnel L3 mode performance
-| ... | test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput GENEVE tunnel L3 mode performance \
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\
-| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\
-| ... | routing over GENEVE tunnels.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\
-| ... | ${n_tunnels} GENEVE tunnels and ${${4} * ${n_tunnels}} static IPv4 /24\
-| ... | route entries. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \
+| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \
+| ... | for IPv4 routing over GENEVE tunnels.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | over ${n_tunnels} GENEVE tunnels and ${${4} ** ${n_tunnels}} static \
+| ... | IPv4 /24 route entries. DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC791, RFC768,
-| ... | RFC8926.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC791, \
+| ... | RFC768 and RFC8926.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so
@@ -81,9 +86,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration.
+| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-4tun-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-4tun-ip4base-ndrpdr.robot
index 63d70d72ec..4d9cd4fb92 100644
--- a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-4tun-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-4tun-ip4base-ndrpdr.robot
@@ -28,29 +28,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput GENEVE tunnel L3 mode performance
-| ... | test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput GENEVE tunnel L3 mode performance \
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\
-| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\
-| ... | routing over GENEVE tunnels.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\
-| ... | ${n_tunnels} GENEVE tunnels and ${${4} * ${n_tunnels}} static IPv4 /24\
-| ... | route entries. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \
+| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \
+| ... | for IPv4 routing over GENEVE tunnels.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | over ${n_tunnels} GENEVE tunnels and ${${4} ** ${n_tunnels}} static \
+| ... | IPv4 /24 route entries. DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC791, RFC768,
-| ... | RFC8926.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC791, \
+| ... | RFC768 and RFC8926.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so
@@ -81,9 +86,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration.
+| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-64tun-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-64tun-ip4base-ndrpdr.robot
index de057a28eb..d4ad8918a7 100644
--- a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-64tun-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-64tun-ip4base-ndrpdr.robot
@@ -28,29 +28,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput GENEVE tunnel L3 mode performance
-| ... | test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput GENEVE tunnel L3 mode performance \
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\
-| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\
-| ... | routing over GENEVE tunnels.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\
-| ... | ${n_tunnels} GENEVE tunnels and ${${4} * ${n_tunnels}} static IPv4 /24\
-| ... | route entries. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \
+| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \
+| ... | for IPv4 routing over GENEVE tunnels.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | over ${n_tunnels} GENEVE tunnels and ${${4} ** ${n_tunnels}} static \
+| ... | IPv4 /24 route entries. DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC791, RFC768,
-| ... | RFC8926.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC791, \
+| ... | RFC768 and RFC8926.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so
@@ -81,9 +86,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration.
+| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).