feat(tests): IPv6 scale

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I720b7c96a6ac9f328aff57437e51254364604911

1 files changed, 144 insertions, 0 deletions

diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale60k-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale60k-ndrpdr.robot
new file mode 100644
index 0000000000..fbb63c8231
--- /dev/null
+++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale60k-ndrpdr.robot
@@ -0,0 +1,144 @@
+# Copyright (c) 2024 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
+| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_60K | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip6-ip6scale60k
+|
+| Suite Setup | Setup suite topology interfaces | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \
+| ... | routing and 6x10k static IPv6 /64 route entries. DUT1 and DUT2 tested \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv6 header \
+| ... | with IP and static payload. MAC addresses are matching MAC addresses \
+| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination \
+| ... | address) field is applied to both streams.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
+| ${overhead}= | ${0}
+| ${rts_per_flow}= | ${10000}
+| ${rxq_ratio}= | ${3}
+# Traffic profile:
+| ${traffic_profile}= | trex-stl-ethip6-ip6dst${rts_per_flow}-${nic_pfs}p
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | - **[Cfg]** DUT runs IPv6 routing config. \
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Set interfaces in path up
+| | And Initialize IPv6 Forwarding | count=${rts_per_flow} | pfs=${nic_pfs}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| 78B-1c-ethip6-ip6scale60k-ndrpdr
+| | [Tags] | 78B | 1C
+| | frame_size=${78} | phy_cores=${1}
+
+| 78B-2c-ethip6-ip6scale60k-ndrpdr
+| | [Tags] | 78B | 2C
+| | frame_size=${78} | phy_cores=${2}
+
+| 78B-4c-ethip6-ip6scale60k-ndrpdr
+| | [Tags] | 78B | 4C
+| | frame_size=${78} | phy_cores=${4}
+
+| 1518B-1c-ethip6-ip6scale60k-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip6-ip6scale60k-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip6-ip6scale60k-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip6-ip6scale60k-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip6-ip6scale60k-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip6-ip6scale60k-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-ethip6-ip6scale60k-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-ethip6-ip6scale60k-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| IMIX-4c-ethip6-ip6scale60k-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}