CSIT-998: MRR tests

 - CSIT-999: MRR tests: L2
   - 10ge2p1x520-eth-l2xcbase-mrr.robot
   - 10ge2p1x520-eth-l2bdbasemaclrn-mrr.robot
   - 10ge2p1x520-dot1q-l2bdbasemaclrn-mrr.robot
   - 10ge2p1x520-dot1q-l2xcbase-mrr.robot
   - 10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-10kflows-mrr.robot
   - 10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-10kflows-mrr.robot
   - 10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr.robot
   - 10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr.robot
   - 10ge2p1x520-eth-l2bdscale100kmaclrn-mrr.robot
   - 10ge2p1x520-eth-l2bdscale10kmaclrn-mrr.robot
   - 10ge2p1x520-eth-l2bdscale1mmaclrn-mrr.robot
   - 10ge2p1x710-eth-l2bdbasemaclrn-ndrpdrdisc.robot
   - 40ge2p1xl710-eth-l2bdbasemaclrn-mrr.robot
   - 40ge2p1xl710-eth-l2xcbase-mrr.robot
 - CSIT-1000: MRR tests: IPv6
   ─ 10ge2p1x520-ethip6-ip6base-copwhtlistbase-mrr.robot
   - 10ge2p1x520-ethip6-ip6base-iacldstbase-mrr.robot
   ─ 10ge2p1x520-ethip6-ip6scale200k-mrr.robot
   ─ 10ge2p1x520-ethip6-ip6scale20k-mrr.robot
   ─ 10ge2p1x520-ethip6-ip6scale2m-mrr.robot
   ─ 40ge2p1xl710-ethip6-ip6base-mrr.robot

Change-Id: Ie42b08151b5da3ba32b972af8b6bedf313c6d29c
Signed-off-by: Tibor Frank <tifrank@cisco.com>

7 files changed, 1411 insertions, 6 deletions

diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-mrr.robot
new file mode 100644
index 0000000000..ce2025b4cf
--- /dev/null
+++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-mrr.robot
@@ -0,0 +1,232 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Library | resources.libraries.python.Cop
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | COPWHLIST
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L3 | Intel-X520-DA2
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results IPv6 whitelist test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6
+| ... | routing, two static IPv6 /64 routes and IPv6 COP security whitelist
+| ... | ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG.
+| ... | DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\
+| ... | at line rate and reports total received/sent packets over trial period.\
+| ... | Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv6 header and static
+| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+# X520-DA2 bandwidth limit
+| ${s_limit} | ${10000000000}
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip6-ip6src253
+
+*** Keywords ***
+| Check RR for ip6base-copwhtlistbase
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with ${wt} \
+| | ... | thread(s), ${wt} phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${framesize} | ${wt} | ${rxq}
+| | ...
+| | # Test Variables required for test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv6 forwarding in 3-node circular topology
+| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE}
+| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE}
+| | And Add Fib Table | ${dut2} | 1 | ipv6=${TRUE}
+| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE}
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-78B-1t1c-ethip6-ip6base-copwhtlistbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 78B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ip6base-copwhtlistbase
+| | wt=1 | rxq=1 | framesize=${78}
+
+| tc02-1518B-1t1c-ethip6-ip6base-copwhtlistbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ip6base-copwhtlistbase
+| | wt=1 | rxq=1 | framesize=${1518}
+
+| tc03-9000B-1t1c-ethip6-ip6base-copwhtlistbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ip6base-copwhtlistbase
+| | wt=1 | rxq=1 | framesize=${9000}
+
+| tc04-IMIX-1t1c-ethip6-ip6base-copwhtlistbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ip6base-copwhtlistbase
+| | wt=1 | rxq=1 | framesize=IMIX_v4_1
+
+| tc05-78B-2t2c-ethip6-ip6base-copwhtlistbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 78B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-copwhtlistbase
+| | wt=2 | rxq=1 | framesize=${78}
+
+| tc06-1518B-2t2c-ethip6-ip6base-copwhtlistbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-copwhtlistbase
+| | wt=2 | rxq=1 | framesize=${1518}
+
+| tc07-9000B-2t2c-ethip6-ip6base-copwhtlistbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-copwhtlistbase
+| | wt=2 | rxq=1 | framesize=${9000}
+
+| tc08-IMIX-2t2c-ethip6-ip6base-copwhtlistbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-copwhtlistbase
+| | wt=2 | rxq=1 | framesize=IMIX_v4_1
+
+| tc09-78B-4t4c-ethip6-ip6base-copwhtlistbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 78B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-copwhtlistbase
+| | wt=4 | rxq=2 | framesize=${78}
+
+| tc10-1518B-4t4c-ethip6-ip6base-copwhtlistbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-copwhtlistbase
+| | wt=4 | rxq=2 | framesize=${1518}
+
+| tc11-9000B-4t4c-ethip6-ip6base-copwhtlistbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-copwhtlistbase
+| | wt=4 | rxq=2 | framesize=${9000}
+
+| tc12-IMIX-4t4c-ethip6-ip6base-copwhtlistbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-copwhtlistbase
+| | wt=4 | rxq=2 | framesize=IMIX_v4_1
diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-iacldstbase-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-iacldstbase-mrr.robot
new file mode 100644
index 0000000000..fe19a88f48
--- /dev/null
+++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-iacldstbase-mrr.robot
@@ -0,0 +1,223 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | IACLDST
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L3 | Intel-X520-DA2
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results IPv6 iAcl whitelist test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6
+| ... | routing, two static IPv6 /64 routes and IPv6 iAcl security whitelist
+| ... | ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG.
+| ... | DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\
+| ... | at line rate and reports total received/sent packets over trial period.\
+| ... | Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv6 header and generated payload. MAC
+| ... | addresses are matching MAC addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+# X520-DA2 bandwidth limit
+| ${s_limit} | ${10000000000}
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip6-ip6src253
+
+*** Keywords ***
+| Check RR for ip6base-iacldstbase
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with ${wt} \
+| | ... | thread(s), ${wt} phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${framesize} | ${wt} | ${rxq}
+| | ...
+| | # Test Variables required for test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv6 forwarding in 3-node circular topology
+| | And Initialize IPv6 iAcl whitelist in 3-node circular topology
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-78B-1t1c-ethip6-ip6base-iacldstbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 78B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ip6base-iacldstbase
+| | wt=1 | rxq=1 | framesize=${78}
+
+| tc02-1518B-1t1c-ethip6-ip6base-iacldstbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ip6base-iacldstbase
+| | wt=1 | rxq=1 | framesize=${1518}
+
+| tc03-9000B-1t1c-ethip6-ip6base-iacldstbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ip6base-iacldstbase
+| | wt=1 | rxq=1 | framesize=${9000}
+
+| tc04-IMIX-1t1c-ethip6-ip6base-iacldstbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ip6base-iacldstbase
+| | wt=1 | rxq=1 | framesize=IMIX_v4_1
+
+| tc05-78B-2t2c-ethip6-ip6base-iacldstbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 78B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-iacldstbase
+| | wt=2 | rxq=1 | framesize=${78}
+
+| tc06-1518B-2t2c-ethip6-ip6base-iacldstbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-iacldstbase
+| | wt=2 | rxq=1 | framesize=${1518}
+
+| tc07-9000B-2t2c-ethip6-ip6base-iacldstbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-iacldstbase
+| | wt=2 | rxq=1 | framesize=${9000}
+
+| tc08-IMIX-2t2c-ethip6-ip6base-iacldstbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-iacldstbase
+| | wt=2 | rxq=1 | framesize=IMIX_v4_1
+
+| tc09-78B-4t4c-ethip6-ip6base-iacldstbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 78B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-iacldstbase
+| | wt=4 | rxq=2 | framesize=${78}
+
+| tc10-1518B-4t4c-ethip6-ip6base-iacldstbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-iacldstbase
+| | wt=4 | rxq=2 | framesize=${1518}
+
+| tc11-9000B-4t4c-ethip6-ip6base-iacldstbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-iacldstbase
+| | wt=4 | rxq=2 | framesize=${9000}
+
+| tc12-IMIX-4t4c-ethip6-ip6base-iacldstbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-iacldstbase
+| | wt=4 | rxq=2 | framesize=IMIX_v4_1
diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-mrr.robot
index adfd31f766..9ab49fbeba 100644
--- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-mrr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-mrr.robot
@@ -78,6 +78,7 @@
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
 | | ... | throughput test.
+| | ...
 | | [Tags] | 78B | 1T1C | STHREAD
 | | ...
 | | [Template] | Check RR for ethip6-ip6base
@@ -89,6 +90,7 @@
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
 | | ... | trial throughput test.
+| | ...
 | | [Tags] | 1518B | 1T1C | STHREAD
 | | ...
 | | [Template] | Check RR for ethip6-ip6base
@@ -100,73 +102,119 @@
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
 | | ... | trial throughput test.
+| | ...
 | | [Tags] | 9000B | 1T1C | STHREAD
 | | ...
 | | [Template] | Check RR for ethip6-ip6base
 | | framesize=${9000} | wt=1 | rxq=1
 
-| tc04-78B-2t2c-ethip6-ip6base-mrr
+| tc04-IMIX-1t1c-ethip6-ip6base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip6-ip6base
+| | wt=1 | rxq=1 | framesize=IMIX_v4_1
+
+| tc05-78B-2t2c-ethip6-ip6base-mrr
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
 | | ... | throughput test.
+| | ...
 | | [Tags] | 78B | 2T2C | MTHREAD
 | | ...
 | | [Template] | Check RR for ethip6-ip6base
 | | framesize=${78} | wt=2 | rxq=1
 
-| tc05-1518B-2t2c-ethip6-ip6base-mrr
+| tc06-1518B-2t2c-ethip6-ip6base-mrr
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
 | | ... | trial throughput test.
+| | ...
 | | [Tags] | 1518B | 2T2C | MTHREAD
 | | ...
 | | [Template] | Check RR for ethip6-ip6base
 | | framesize=${1518} | wt=2 | rxq=1
 
-| tc06-9000B-2t2c-ethip6-ip6base-mrr
+| tc07-9000B-2t2c-ethip6-ip6base-mrr
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
 | | ... | trial throughput test.
+| | ...
 | | [Tags] | 9000B | 2T2C | MTHREAD
 | | ...
 | | [Template] | Check RR for ethip6-ip6base
 | | framesize=${9000} | wt=2 | rxq=1
 
-| tc07-78B-4t4c-ethip6-ip6base-mrr
+| tc08-IMIX-2t2c-ethip6-ip6base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip6-ip6base
+| | wt=2 | rxq=1 | framesize=IMIX_v4_1
+
+| tc09-78B-4t4c-ethip6-ip6base-mrr
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores,\
 | | ... | 2 receive queues per NIC port.
 | | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
 | | ... | throughput test.
+| | ...
 | | [Tags] | 78B | 4T4C | MTHREAD
 | | ...
 | | [Template] | Check RR for ethip6-ip6base
 | | framesize=${78} | wt=4 | rxq=2
 
-| tc08-1518B-4t4c-ethip6-ip6base-mrr
+| tc10-1518B-4t4c-ethip6-ip6base-mrr
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores,\
 | | ... | 2 receive queues per NIC port.
 | | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
 | | ... | trial throughput test.
+| | ...
 | | [Tags] | 1518B | 4T4C | MTHREAD
 | | ...
 | | [Template] | Check RR for ethip6-ip6base
 | | framesize=${1518} | wt=4 | rxq=2
 
-| tc09-9000B-4t4c-ethip6-ip6base-mrr
+| tc11-9000B-4t4c-ethip6-ip6base-mrr
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores,\
 | | ... | 2 receive queues per NIC port.
 | | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
 | | ... | trial throughput test.
+| | ...
 | | [Tags] | 9000B | 4T4C | MTHREAD
 | | ...
 | | [Template] | Check RR for ethip6-ip6base
 | | framesize=${9000} | wt=4 | rxq=2
+
+| tc12-IMIX-4t4c-ethip6-ip6base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip6-ip6base
+| | wt=4 | rxq=2 | framesize=IMIX_v4_1
diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-mrr.robot
new file mode 100644
index 0000000000..6465e9908a
--- /dev/null
+++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-mrr.robot
@@ -0,0 +1,225 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | SCALE | FIB_200K
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L3 | Intel-X520-DA2
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results IPv6 routing test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6
+| ... | routing and 2x100k static IPv6 /64 route entries. DUT1 and DUT2 tested
+| ... | with 2p10GE NIC X520 Niantic by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\
+| ... | at line rate and reports total received/sent packets over trial period.\
+| ... | Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 100k flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv6 header withq IP and static payload.
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... | Incrementing of IP.dst (IPv6 destination address) field is applied to
+| ... | both streams.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+# X520-DA2 bandwidth limit
+| ${s_limit} | ${10000000000}
+| ${rts_per_flow}= | ${100000}
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip6-ip6dst${rts_per_flow}
+
+*** Keywords ***
+| Check RR for ip6base-ip6scale
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with ${wt} \
+| | ... | thread(s), ${wt} phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${framesize} | ${wt} | ${rxq}
+| | ...
+| | # Test Variables required for test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv6 forwarding with scaling in 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-78B-1t1c-ethip6-ip6base-ip6scale200k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 78B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=1 | rxq=1 | framesize=${78}
+
+| tc02-1518B-1t1c-ethip6-ip6base-ip6scale200k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=1 | rxq=1 | framesize=${1518}
+
+| tc03-9000B-1t1c-ethip6-ip6base-ip6scale200k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=1 | rxq=1 | framesize=${9000}
+
+| tc04-IMIX-1t1c-ethip6-ip6base-ip6scale200k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=1 | rxq=1 | framesize=IMIX_v4_1
+
+| tc05-78B-2t2c-ethip6-ip6base-ip6scale200k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 78B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=2 | rxq=1 | framesize=${78}
+
+| tc06-1518B-2t2c-ethip6-ip6base-ip6scale200k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=2 | rxq=1 | framesize=${1518}
+
+| tc07-9000B-2t2c-ethip6-ip6base-ip6scale200k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=2 | rxq=1 | framesize=${9000}
+
+| tc08-IMIX-2t2c-ethip6-ip6base-ip6scale200k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=2 | rxq=1 | framesize=IMIX_v4_1
+
+| tc09-78B-4t4c-ethip6-ip6base-ip6scale200k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 78B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=4 | rxq=2 | framesize=${78}
+
+| tc10-1518B-4t4c-ethip6-ip6base-ip6scale200k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=4 | rxq=2 | framesize=${1518}
+
+| tc11-9000B-4t4c-ethip6-ip6base-ip6scale200k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=4 | rxq=2 | framesize=${9000}
+
+| tc12-IMIX-4t4c-ethip6-ip6base-ip6scale200k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=4 | rxq=2 | framesize=IMIX_v4_1
diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-mrr.robot
new file mode 100644
index 0000000000..3ede79a377
--- /dev/null
+++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-mrr.robot
@@ -0,0 +1,225 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | SCALE | FIB_20K
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L3 | Intel-X520-DA2
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results IPv6 routing test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6
+| ... | routing and 2x10k static IPv6 /64 route entries. DUT1 and DUT2 tested
+| ... | with 2p10GE NIC X520 Niantic by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\
+| ... | at line rate and reports total received/sent packets over trial period.\
+| ... | Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 10k flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv6 header withq IP and static payload.
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... | Incrementing of IP.dst (IPv6 destination address) field is applied to
+| ... | both streams.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+# X520-DA2 bandwidth limit
+| ${s_limit} | ${10000000000}
+| ${rts_per_flow}= | ${10000}
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip6-ip6dst${rts_per_flow}
+
+*** Keywords ***
+| Check RR for ip6base-ip6scale
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with ${wt} \
+| | ... | thread(s), ${wt} phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${framesize} | ${wt} | ${rxq}
+| | ...
+| | # Test Variables required for test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv6 forwarding with scaling in 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-78B-1t1c-ethip6-ip6base-ip6scale20k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 78B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=1 | rxq=1 | framesize=${78}
+
+| tc02-1518B-1t1c-ethip6-ip6base-ip6scale20k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=1 | rxq=1 | framesize=${1518}
+
+| tc03-9000B-1t1c-ethip6-ip6base-ip6scale20k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=1 | rxq=1 | framesize=${9000}
+
+| tc04-IMIX-1t1c-ethip6-ip6base-ip6scale20k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=1 | rxq=1 | framesize=IMIX_v4_1
+
+| tc05-78B-2t2c-ethip6-ip6base-ip6scale20k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 78B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=2 | rxq=1 | framesize=${78}
+
+| tc06-1518B-2t2c-ethip6-ip6base-ip6scale20k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=2 | rxq=1 | framesize=${1518}
+
+| tc07-9000B-2t2c-ethip6-ip6base-ip6scale20k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=2 | rxq=1 | framesize=${9000}
+
+| tc08-IMIX-2t2c-ethip6-ip6base-ip6scale20k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=2 | rxq=1 | framesize=IMIX_v4_1
+
+| tc09-78B-4t4c-ethip6-ip6base-ip6scale20k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 78B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=4 | rxq=2 | framesize=${78}
+
+| tc10-1518B-4t4c-ethip6-ip6base-ip6scale20k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=4 | rxq=2 | framesize=${1518}
+
+| tc11-9000B-4t4c-ethip6-ip6base-ip6scale20k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=4 | rxq=2 | framesize=${9000}
+
+| tc12-IMIX-4t4c-ethip6-ip6base-ip6scale20k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=4 | rxq=2 | framesize=IMIX_v4_1
diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-mrr.robot
new file mode 100644
index 0000000000..79e09e9661
--- /dev/null
+++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-mrr.robot
@@ -0,0 +1,225 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | SCALE | FIB_2M
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L3 | Intel-X520-DA2
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results IPv6 routing test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6
+| ... | routing and 2x1M static IPv6 /64 route entries. DUT1 and DUT2 tested
+| ... | with 2p10GE NIC X520 Niantic by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\
+| ... | at line rate and reports total received/sent packets over trial period.\
+| ... | Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 1M flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv6 header withq IP and static payload.
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... | Incrementing of IP.dst (IPv6 destination address) field is applied to
+| ... | both streams.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+# X520-DA2 bandwidth limit
+| ${s_limit} | ${10000000000}
+| ${rts_per_flow}= | ${1000000}
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip6-ip6dst${rts_per_flow}
+
+*** Keywords ***
+| Check RR for ip6base-ip6scale
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with ${wt} \
+| | ... | thread(s), ${wt} phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${framesize} | ${wt} | ${rxq}
+| | ...
+| | # Test Variables required for test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv6 forwarding with scaling in 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-78B-1t1c-ethip6-ip6base-ip6scale2m-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 78B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=1 | rxq=1 | framesize=${78}
+
+| tc02-1518B-1t1c-ethip6-ip6base-ip6scale2m-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=1 | rxq=1 | framesize=${1518}
+
+| tc03-9000B-1t1c-ethip6-ip6base-ip6scale2m-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=1 | rxq=1 | framesize=${9000}
+
+| tc04-IMIX-1t1c-ethip6-ip6base-ip6scale2m-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=1 | rxq=1 | framesize=IMIX_v4_1
+
+| tc05-78B-2t2c-ethip6-ip6base-ip6scale2m-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 78B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=2 | rxq=1 | framesize=${78}
+
+| tc06-1518B-2t2c-ethip6-ip6base-ip6scale2m-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=2 | rxq=1 | framesize=${1518}
+
+| tc07-9000B-2t2c-ethip6-ip6base-ip6scale2m-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=2 | rxq=1 | framesize=${9000}
+
+| tc08-IMIX-2t2c-ethip6-ip6base-ip6scale2m-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=2 | rxq=1 | framesize=IMIX_v4_1
+
+| tc09-78B-4t4c-ethip6-ip6base-ip6scale2m-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 78B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=4 | rxq=2 | framesize=${78}
+
+| tc10-1518B-4t4c-ethip6-ip6base-ip6scale2m-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=4 | rxq=2 | framesize=${1518}
+
+| tc11-9000B-4t4c-ethip6-ip6base-ip6scale2m-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=4 | rxq=2 | framesize=${9000}
+
+| tc12-IMIX-4t4c-ethip6-ip6base-ip6scale2m-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ip6base-ip6scale
+| | wt=4 | rxq=2 | framesize=IMIX_v4_1
diff --git a/tests/vpp/perf/ip6/40ge2p1xl710-ethip6-ip6base-mrr.robot b/tests/vpp/perf/ip6/40ge2p1xl710-ethip6-ip6base-mrr.robot
new file mode 100644
index 0000000000..77915f3760
--- /dev/null
+++ b/tests/vpp/perf/ip6/40ge2p1xl710-ethip6-ip6base-mrr.robot
@@ -0,0 +1,227 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-XL710 | ETH | IP6FWD | BASE
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L3 | Intel-XL710
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results IPv6 routing test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6
+| ... | routing and two static IPv6 /64 route entries. DUT1 and DUT2 tested with
+| ... | 2p40GE NIC XL710 by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv6 header and static payload.
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
+| ${s_24.5G} | ${24500000000}
+# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
+| ${s_18.75Mpps} | ${18750000}
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip6-ip6src253
+
+*** Keywords ***
+| Check RR for ethip6-ip6base
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with ${wt} thread(s), ${wt}\
+| | ... | phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${framesize} | ${wt} | ${rxq}
+| | ...
+| | # Test Variables required for test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${get_framesize}
+| | ${max_rate}= | Set Variable If
+| | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Add DPDK dev default RXD to all DUTs | 2048
+| | And Add DPDK dev default TXD to all DUTs | 2048
+| | And Apply startup configuration on all VPP DUTs
+| | And Initialize IPv6 forwarding in 3-node circular topology
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-78B-1t1c-ethip6-ip6base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 78B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip6-ip6base
+| | framesize=${78} | wt=1 | rxq=1
+
+| tc02-1518B-1t1c-ethip6-ip6base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip6-ip6base
+| | framesize=${1518} | wt=1 | rxq=1
+
+| tc03-9000B-1t1c-ethip6-ip6base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip6-ip6base
+| | framesize=${9000} | wt=1 | rxq=1
+
+| tc04-IMIX-1t1c-ethip6-ip6base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip6-ip6base
+| | framesize=IMIX_v4_1 | wt=1 | rxq=1
+
+| tc05-78B-2t2c-ethip6-ip6base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 78B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip6-ip6base
+| | framesize=${78} | wt=2 | rxq=1
+
+| tc06-1518B-2t2c-ethip6-ip6base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip6-ip6base
+| | framesize=${1518} | wt=2 | rxq=1
+
+| tc07-9000B-2t2c-ethip6-ip6base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip6-ip6base
+| | framesize=${9000} | wt=2 | rxq=1
+
+| tc08-IMIX-2t2c-ethip6-ip6base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip6-ip6base
+| | framesize=IMIX_v4_1 | wt=2 | rxq=1
+
+| tc09-78B-4t4c-ethip6-ip6base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 78B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip6-ip6base
+| | framesize=${78} | wt=4 | rxq=2
+
+| tc10-1518B-4t4c-ethip6-ip6base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip6-ip6base
+| | framesize=${1518} | wt=4 | rxq=2
+
+| tc11-9000B-4t4c-ethip6-ip6base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip6-ip6base
+| | framesize=${9000} | wt=4 | rxq=2
+
+| tc12-IMIX-4t4c-ethip6-ip6base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip6-ip6base
+| | framesize=IMIX_v4_1 | wt=4 | rxq=2