Align suite/test teardown/setup

+ Phase II - aligning FUNC/PERF setup.
  + 2n/3n compatibility of suite setup.
  + Same structure of testcase for DEV/PERF.
  + DEVICE tests are now running VPP startup config in same
    way as PERF.
  + DEVICE is using COREKEEPER!
- DEVICE tests are running topology compute twice for backward
  compatibility. TODO to remove.
- Still phase III needed to align TAGS, LIBRARIES and remove OLD
  setup phase.

Change-Id: Ib6e1b0ebf4abebf3cbe73b4fda5cac953c2a7270
Signed-off-by: Peter Mikus <pmikus@cisco.com>

12 files changed, 73 insertions, 73 deletions

diff --git a/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot
index ccec825157..9a00716688 100644
--- a/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot
@@ -12,16 +12,14 @@
 # limitations under the License.
 
 *** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Resource | resources/libraries/robot/shared/default.robot
 | ...
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
 | ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | DOT1Q | IP6BASE
 | ...
-| Suite Setup | Set up 3-node performance topology with DUT's NIC model
-| ... | L3 | ${nic_name}
+| Suite Setup | Setup suite single link | performance
 | Suite Teardown | Tear down suite | performance
-| ...
-| Test Setup | Set up performance test
+| Test Setup | Setup test
 | Test Teardown | Tear down test | performance
 | ...
 | Test Template | Local Template
@@ -50,6 +48,8 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${osi_layer}= | L3
 | ${nic_name}= | Intel-X710
 | ${overhead}= | ${4}
 | ${subid}= | 10
@@ -79,7 +79,7 @@
 | | ...
 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
 | | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
+| | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize IPv6 forwarding with VLAN dot1q sub-interfaces in circular topology
 | | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite}
diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot
index c18607f9ce..6d2ca5d587 100644
--- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot
@@ -12,17 +12,15 @@
 # limitations under the License.
 
 *** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Resource | resources/libraries/robot/shared/default.robot
 | Library | resources.libraries.python.Cop
 | ...
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
 | ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | COPWHLIST
 | ...
-| Suite Setup | Set up 3-node performance topology with DUT's NIC model
-| ... | L3 | ${nic_name}
+| Suite Setup | Setup suite single link | performance
 | Suite Teardown | Tear down suite | performance
-| ...
-| Test Setup | Set up performance test
+| Test Setup | Setup test
 | Test Teardown | Tear down test | performance
 | ...
 | Test Template | Local Template
@@ -50,6 +48,8 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${osi_layer}= | L3
 | ${nic_name}= | Intel-X710
 | ${overhead}= | ${0}
 # Traffic profile:
@@ -74,7 +74,7 @@
 | | ...
 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
 | | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
+| | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize IPv6 forwarding in 3-node circular topology
 | | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE}
diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot
index 0146503e4e..aebc5b02e3 100644
--- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot
@@ -12,16 +12,14 @@
 # limitations under the License.
 
 *** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Resource | resources/libraries/robot/shared/default.robot
 | ...
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
 | ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | IACLDST
 | ...
-| Suite Setup | Set up 3-node performance topology with DUT's NIC model
-| ... | L3 | ${nic_name}
+| Suite Setup | Setup suite single link | performance
 | Suite Teardown | Tear down suite | performance
-| ...
-| Test Setup | Set up performance test
+| Test Setup | Setup test
 | Test Teardown | Tear down test | performance
 | ...
 | Test Template | Local Template
@@ -48,6 +46,8 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${osi_layer}= | L3
 | ${nic_name}= | Intel-X710
 | ${overhead}= | ${0}
 # Traffic profile:
@@ -72,7 +72,7 @@
 | | ...
 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
 | | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
+| | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize IPv6 forwarding in 3-node circular topology
 | | And Initialize IPv6 iAcl whitelist in 3-node circular topology
diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-ndrpdr.robot
index 4f8da1071e..11a588485b 100644
--- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-ndrpdr.robot
@@ -12,16 +12,14 @@
 # limitations under the License.
 
 *** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Resource | resources/libraries/robot/shared/default.robot
 | ...
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
 | ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | IP6BASE
 | ...
-| Suite Setup | Set up 3-node performance topology with DUT's NIC model
-| ... | L3 | ${nic_name}
+| Suite Setup | Setup suite single link | performance
 | Suite Teardown | Tear down suite | performance
-| ...
-| Test Setup | Set up performance test
+| Test Setup | Setup test
 | Test Teardown | Tear down test | performance
 | ...
 | Test Template | Local Template
@@ -47,6 +45,8 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${osi_layer}= | L3
 | ${nic_name}= | Intel-X710
 | ${overhead}= | ${0}
 # Traffic profile:
@@ -71,7 +71,7 @@
 | | ...
 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
 | | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
+| | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPv6 forwarding in 3-node circular topology
 | | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot
index adc3b1036b..4cde20ce37 100644
--- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot
@@ -12,16 +12,14 @@
 # limitations under the License.
 
 *** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Resource | resources/libraries/robot/shared/default.robot
 | ...
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
 | ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_200K
 | ...
-| Suite Setup | Set up 3-node performance topology with DUT's NIC model
-| ... | L3 | ${nic_name}
+| Suite Setup | Setup suite single link | performance
 | Suite Teardown | Tear down suite | performance
-| ...
-| Test Setup | Set up performance test
+| Test Setup | Setup test
 | Test Teardown | Tear down test | performance
 | ...
 | Test Template | Local Template
@@ -48,6 +46,8 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${osi_layer}= | L3
 | ${nic_name}= | Intel-X710
 | ${overhead}= | ${0}
 | ${rts_per_flow}= | ${100000}
@@ -73,7 +73,7 @@
 | | ...
 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
 | | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
+| | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize IPv6 forwarding with scaling in circular topology
 | | ... | ${rts_per_flow}
diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot
index ed6b0eba2f..96de50b879 100644
--- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot
@@ -12,16 +12,14 @@
 # limitations under the License.
 
 *** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Resource | resources/libraries/robot/shared/default.robot
 | ...
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
 | ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_20K
 | ...
-| Suite Setup | Set up 3-node performance topology with DUT's NIC model
-| ... | L3 | ${nic_name}
+| Suite Setup | Setup suite single link | performance
 | Suite Teardown | Tear down suite | performance
-| ...
-| Test Setup | Set up performance test
+| Test Setup | Setup test
 | Test Teardown | Tear down test | performance
 | ...
 | Test Template | Local Template
@@ -48,6 +46,8 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${osi_layer}= | L3
 | ${nic_name}= | Intel-X710
 | ${overhead}= | ${0}
 | ${rts_per_flow}= | ${10000}
@@ -73,7 +73,7 @@
 | | ...
 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
 | | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
+| | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize IPv6 forwarding with scaling in circular topology
 | | ... | ${rts_per_flow}
diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot
index 1ca96ebfdb..db3ae9b445 100644
--- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot
@@ -12,16 +12,14 @@
 # limitations under the License.
 
 *** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Resource | resources/libraries/robot/shared/default.robot
 | ...
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
 | ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_2M
 | ...
-| Suite Setup | Set up 3-node performance topology with DUT's NIC model
-| ... | L3 | ${nic_name}
+| Suite Setup | Setup suite single link | performance
 | Suite Teardown | Tear down suite | performance
-| ...
-| Test Setup | Set up performance test
+| Test Setup | Setup test
 | Test Teardown | Tear down test | performance
 | ...
 | Test Template | Local Template
@@ -48,6 +46,8 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${osi_layer}= | L3
 | ${nic_name}= | Intel-X710
 | ${overhead}= | ${0}
 | ${rts_per_flow}= | ${1000000}
@@ -73,7 +73,7 @@
 | | ...
 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
 | | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
+| | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize IPv6 forwarding with scaling in circular topology
 | | ... | ${rts_per_flow}
diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-dot1q-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-dot1q-ip6base-ndrpdr.robot
index 51f7496b28..82954843e2 100644
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-dot1q-ip6base-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-dot1q-ip6base-ndrpdr.robot
@@ -12,16 +12,14 @@
 # limitations under the License.
 
 *** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Resource | resources/libraries/robot/shared/default.robot
 | ...
 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
 | ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | DOT1Q | IP6BASE
 | ...
-| Suite Setup | Set up 2-node performance topology with DUT's NIC model
-| ... | L3 | ${nic_name}
+| Suite Setup | Setup suite single link | performance
 | Suite Teardown | Tear down suite | performance
-| ...
-| Test Setup | Set up performance test
+| Test Setup | Setup test
 | Test Teardown | Tear down test | performance
 | ...
 | Test Template | Local Template
@@ -49,6 +47,8 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${osi_layer}= | L3
 | ${nic_name}= | Intel-X710
 | ${overhead}= | ${4}
 | ${subid}= | 10
@@ -78,7 +78,7 @@
 | | ...
 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
 | | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
+| | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize IPv6 forwarding with VLAN dot1q sub-interfaces in circular topology
 | | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite}
diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot
index a52ad238dd..ece6779964 100644
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot
@@ -12,16 +12,14 @@
 # limitations under the License.
 
 *** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Resource | resources/libraries/robot/shared/default.robot
 | ...
 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
 | ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | IP6BASE
 | ...
-| Suite Setup | Set up 2-node performance topology with DUT's NIC model
-| ... | L3 | ${nic_name}
+| Suite Setup | Setup suite single link | performance
 | Suite Teardown | Tear down suite | performance
-| ...
-| Test Setup | Set up performance test
+| Test Setup | Setup test
 | Test Teardown | Tear down test | performance
 | ...
 | Test Template | Local Template
@@ -46,7 +44,9 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
-| ${nic_name}= | Intel-X710
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${osi_layer}= | L3
+ ${nic_name}= | Intel-X710
 | ${overhead}= | ${0}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n-ethip6-ip6src253
@@ -70,7 +70,7 @@
 | | ...
 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
 | | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
+| | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPv6 forwarding in 2-node circular topology
 | | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot
index f8b99d8c99..458517baf9 100644
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot
@@ -12,16 +12,14 @@
 # limitations under the License.
 
 *** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Resource | resources/libraries/robot/shared/default.robot
 | ...
 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
 | ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_200k
 | ...
-| Suite Setup | Set up 2-node performance topology with DUT's NIC model
-| ... | L3 | ${nic_name}
+| Suite Setup | Setup suite single link | performance
 | Suite Teardown | Tear down suite | performance
-| ...
-| Test Setup | Set up performance test
+| Test Setup | Setup test
 | Test Teardown | Tear down test | performance
 | ...
 | Test Template | Local Template
@@ -47,6 +45,8 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${osi_layer}= | L3
 | ${nic_name}= | Intel-X710
 | ${overhead}= | ${0}
 | ${rts_per_flow}= | ${100000}
@@ -72,7 +72,7 @@
 | | ...
 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
 | | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
+| | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize IPv6 forwarding with scaling in circular topology
 | | ... | ${rts_per_flow}
diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot
index ea17fd68b6..ff3e64e2a9 100644
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot
@@ -12,16 +12,14 @@
 # limitations under the License.
 
 *** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Resource | resources/libraries/robot/shared/default.robot
 | ...
 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
 | ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_20k
 | ...
-| Suite Setup | Set up 2-node performance topology with DUT's NIC model
-| ... | L3 | ${nic_name}
+| Suite Setup | Setup suite single link | performance
 | Suite Teardown | Tear down suite | performance
-| ...
-| Test Setup | Set up performance test
+| Test Setup | Setup test
 | Test Teardown | Tear down test | performance
 | ...
 | Test Template | Local Template
@@ -47,6 +45,8 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${osi_layer}= | L3
 | ${nic_name}= | Intel-X710
 | ${overhead}= | ${0}
 | ${rts_per_flow}= | ${10000}
@@ -72,7 +72,7 @@
 | | ...
 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
 | | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
+| | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize IPv6 forwarding with scaling in circular topology
 | | ... | ${rts_per_flow}
diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot
index 35eb4e7924..304696957a 100644
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot
@@ -12,16 +12,14 @@
 # limitations under the License.
 
 *** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Resource | resources/libraries/robot/shared/default.robot
 | ...
 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
 | ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_2M
 | ...
-| Suite Setup | Set up 2-node performance topology with DUT's NIC model
-| ... | L3 | ${nic_name}
+| Suite Setup | Setup suite single link | performance
 | Suite Teardown | Tear down suite | performance
-| ...
-| Test Setup | Set up performance test
+| Test Setup | Setup test
 | Test Teardown | Tear down test | performance
 | ...
 | Test Template | Local Template
@@ -47,6 +45,8 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${osi_layer}= | L3
 | ${nic_name}= | Intel-X710
 | ${overhead}= | ${0}
 | ${rts_per_flow}= | ${1000000}
@@ -72,7 +72,7 @@
 | | ...
 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
 | | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
+| | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize IPv6 forwarding with scaling in circular topology
 | | ... | ${rts_per_flow}