CSIT-1097: Migrate L2 to NDRPDR and edit MRR

Change-Id: I738d1794f795e1225bc9709ea2ed2cf9b06d1cf4
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

1 files changed, 0 insertions, 170 deletions

diff --git a/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2bdbasemaclrn-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2bdbasemaclrn-ndrpdrdisc.robot
deleted file mode 100644
index 0e6a13b44c..0000000000
--- a/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2bdbasemaclrn-ndrpdrdisc.robot
+++ /dev/null
@@ -1,170 +0,0 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X520-DA2 | BASE | DOT1Q | L2BDMACLRN
-| ...
-| Suite Setup | Set up 3-node performance topology with DUT's NIC model
-| ... | L2 | Intel-X520-DA2
-| Suite Teardown | Tear down 3-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Tear down performance discovery test | ${min_rate}pps
-| ... | ${framesize} | ${traffic_profile}
-| ...
-| Test Template | Local template
-| ...
-| Documentation | *RFC2544: Packet throughput L2BD test cases with 802.1q test
-| ... | cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.\
-| ... | 802.1q tagging is applied on link between DUT1 and DUT2.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge\
-| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NIC
-| ... | X520 Niantic by Intel.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using either binary search or linear search\
-| ... | algorithms with configured starting rate and final step that determines\
-| ... | throughput measurement resolution. Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-| ${subid}= | 10
-| ${tag_rewrite}= | pop-1
-| ${vlan_overhead}= | ${4}
-| ${avg_imix_framesize}= | ${357.833}
-# X520-DA2 bandwidth limit
-| ${s_limit} | ${10000000000}
-# Bridge domain IDs
-| ${bd_id1}= | 1
-| ${bd_id2}= | 2
-# Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
-
-*** Keywords ***
-| Local template
-| | [Arguments] | ${phy_core} | ${framesize} | ${search_type}
-| | ... | ${min_rate}=${50000} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | ${framesize}
-| | Set Test Variable | ${min_rate}
-| | ${get_framesize}= | Set Variable If
-| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize}
-| | ... |  ${framesize}
-| | ${max_rate}= | Calculate pps | ${s_limit}
-| | ... | ${get_framesize + ${vlan_overhead}}
-| | ${binary_min}= | Set Variable | ${min_rate}
-| | ${binary_max}= | Set Variable | ${max_rate}
-| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Run Keyword If | ${get_framesize} < ${1522}
-| | ... | Add no multi seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize L2 bridge domains with VLAN dot1q sub-interfaces in a 3-node circular topology
-| | ... | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite}
-| | Run Keyword If | '${search_type}' == 'NDR'
-| | ... | Find NDR using binary search and pps
-| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
-| | ... | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ELSE IF | '${search_type}' == 'PDR'
-| | ... | Find PDR using binary search and pps
-| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
-| | ... | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
-
-*** Test Cases ***
-| tc01-64B-1t1c-dot1q-l2bdbasemaclrn-ndrdisc
-| | [Tags] | 64B | 1C | NDRDISC
-| | phy_cores=${1} | framesize=${64}  | search_type=NDR
-
-| tc02-64B-1t1c-dot1q-l2bdbasemaclrn-pdrdisc
-| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH
-| | phy_cores=${1} | framesize=${64}  | search_type=PDR
-
-| tc03-1518B-1t1c-dot1q-l2bdbasemaclrn-ndrdisc
-| | [Tags] | 1518B | 1C | NDRDISC
-| | phy_cores=${1} | framesize=${1518}  | search_type=NDR
-
-| tc04-1518B-1t1c-dot1q-l2bdbasemaclrn-pdrdisc
-| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH
-| | phy_cores=${1} | framesize=${1518}  | search_type=PDR
-
-| tc05-IMIX-1t1c-dot1q-l2bdbasemaclrn-ndrdisc
-| | [Tags] | IMIX | 1C | NDRDISC
-| | phy_cores=${1} | framesize=IMIX_v4_1  | search_type=NDR
-
-| tc06-IMIX-1t1c-dot1q-l2bdbasemaclrn-pdrdisc
-| | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH
-| | phy_cores=${1} | framesize=IMIX_v4_1  | search_type=PDR
-
-| tc07-64B-2t2c-dot1q-l2bdbasemaclrn-ndrdisc
-| | [Tags] | 64B | 2C | NDRDISC
-| | phy_cores=${2} | framesize=${64}  | search_type=NDR
-
-| tc08-64B-2t2c-dot1q-l2bdbasemaclrn-pdrdisc
-| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH
-| | phy_cores=${2} | framesize=${64}  | search_type=PDR
-
-| tc09-1518B-2t2c-dot1q-l2bdbasemaclrn-ndrdisc
-| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH
-| | phy_cores=${2} | framesize=${1518}  | search_type=NDR
-
-| tc10-1518B-2t2c-dot1q-l2bdbasemaclrn-pdrdisc
-| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH
-| | phy_cores=${2} | framesize=${1518}  | search_type=PDR
-
-| tc11-IMIX-2t2c-dot1q-l2bdbasemaclrn-ndrdisc
-| | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH
-| | phy_cores=${2} | framesize=IMIX_v4_1  | search_type=NDR
-
-| tc12-IMIX-2t2c-dot1q-l2bdbasemaclrn-pdrdisc
-| | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH
-| | phy_cores=${2} | framesize=IMIX_v4_1  | search_type=PDR
-
-| tc13-64B-4t4c-dot1q-l2bdbasemaclrn-ndrdisc
-| | [Tags] | 64B | 4C | NDRDISC
-| | phy_cores=${4} | framesize=${64}  | search_type=NDR
-
-| tc14-64B-4t4c-dot1q-l2bdbasemaclrn-pdrdisc
-| | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH
-| | phy_cores=${4} | framesize=${64}  | search_type=PDR
-
-| tc15-1518B-4t4c-dot1q-l2bdbasemaclrn-ndrdisc
-| | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH
-| | phy_cores=${4} | framesize=${1518}  | search_type=NDR
-
-| tc16-1518B-4t4c-dot1q-l2bdbasemaclrn-pdrdisc
-| | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH
-| | phy_cores=${4} | framesize=${1518}  | search_type=PDR
-
-| tc17-IMIX-4t4c-dot1q-l2bdbasemaclrn-ndrdisc
-| | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH
-| | phy_cores=${4} | framesize=IMIX_v4_1  | search_type=NDR
-
-| tc18-IMIX-4t4c-dot1q-l2bdbasemaclrn-pdrdisc
-| | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH
-| | phy_cores=${4} | framesize=IMIX_v4_1  | search_type=PDR