Add dot1q-l2[bd|xc]base-[ndrpdr|mrr] perf tests for 2-node topology

Jira: CSIT-1284

Change-Id: I8ce4ffc76adf55bf9a8423077b8639601c560c87
Signed-off-by: Jan Gelety <jgelety@cisco.com>

1 files changed, 19 insertions, 20 deletions

diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
index 76a552a90f..0b1ed19aeb 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
@@ -29,26 +29,25 @@
 | ...
 | Test Template | Local Template
 | ...
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 802.1q*
+| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases*
 | ...
 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.\
-| ... | 802.1q tagging is applied on link between DUT1 and DUT2.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. IEEE\
+| ... | 802.1Q tagging is applied on link between DUT1 and DUT2.
 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge\
-| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NIC
-| ... | X710 by Intel.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
-| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
-| ... | of packets transmitted. NDR and PDR are discovered for different
-| ... | Ethernet L2 frame sizes using MLRsearch library.
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
+| ... | domain and MAC learning enabled. DUT1 and DUT2 are tested with 2p10GE\
+| ... | NIC X710 by Intel.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library. Test packets are\
+| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\
+| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\
+| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG\
+| ... | node interfaces.
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
@@ -66,9 +65,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD config with VLAN with ${phy_cores} phy
-| | ... | core(s).
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | [Cfg] Each DUT runs L2BD config with VLAN and uses ${phy_cores}\
+| | ... | physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.
 | | ...
 | | ... | *Arguments:*
 | | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -86,7 +85,7 @@
 | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
 | | ... | ${s_limit} | ${framesize} | overhead=${overhead}
 | | And Apply startup configuration on all VPP DUTs
-| | When Initialize L2 bridge domains with VLAN dot1q sub-interfaces in a 3-node circular topology
+| | When Initialize L2 bridge domains with VLAN dot1q sub-interfaces in circular topology
 | | ... | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite}
 | | Then Find NDR and PDR intervals using optimized search
 | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate}