doc: fixing documentation structure

When building documentation using sphinx we see ~1200 similar warnings [0]
[0] - https://s3-logs.fd.io/vex-yul-rot-jenkins-1/csit-verify-tox-master-ubuntu2004-x86_64/3289/doc_verify.log.gz

These warning are harmless and can be fixed later

Signed-off-by: Viliam Luc <vluc@cisco.com>
Change-Id: I1ac1099d38935971d47491dde905715345d3935c

119 files changed, 3108 insertions, 2632 deletions

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot
index 13ab555635..6305950a9d 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 10 chains
-| ... | 10 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 10 \
+| ... | chains 10 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot
index 3c50fee210..2b8dd07af8 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 10 chains
-| ... | 10 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 10 \
+| ... | chains 10 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot
index 22f7a58b78..2fed1befdd 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 10 chains
-| ... | 20 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 10 \
+| ... | chains 20 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot
index 9c58783753..acb97f0186 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 6 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 6 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot
index 4e231c13be..5f2b7d885e 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 6 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 6 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot
index 2a2fec31f4..461bb70851 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot
index 772a803a02..759dcd3ad7 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot
index 1414a3f732..1a5ff16fc7 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 10 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 10 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot
index 4702648623..1de1be0bf1 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 10 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 10 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domainsand MAC learning enabled. DUT1 tested with ${nic_name}.
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot
index e494ac05bf..270b1272bd 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot
index ac9ce1cc1b..90b0c806f8 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot
index c720a45dd7..a360c5c59f 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot
index 7149698fda..80671e2a74 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot
index ca6cbc5671..536beb8fb5 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot
index 02cba051f6..7bb3e9864c 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot
index 7aeec1005b..d1d65cb577 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 2 chains 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot
index 74c254ef1a..eb0c84267f 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 2 chains 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot
index 844e84d1ba..f141a5d481 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 12 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 2 chains 12 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot
index 8a59a79f1f..a69b285002 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 12 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 2 chains 12 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot
index 9878b54e2e..d942801292 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 16 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 2 chains 16 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot
index a8f77b3706..2c59f700d0 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot
@@ -28,27 +28,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 16 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 2 chains 16 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -75,9 +79,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot
index 5ad81f11a2..832714800e 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 20 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 2 chains 20 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot
index bde57e98fa..2ae915fcb4 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 2 chains 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot
index afce74f80b..0ce59acd8a 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 2 chains 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot
index 19d6862c6a..0015d457cc 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 2 chains 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot
index 25ca78a53f..dc66918c24 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 2 chains 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot
index 5cd468aa82..799dc93714 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 4 chains
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 4 chains 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot
index 54e5895546..ecf2d4d42a 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 4 chains
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 4 chains 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot
index 0951fc3b04..a54062105c 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 4 chains
-| ... | 16 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 4 chains 16 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot
index 026e51d359..53f8672ab6 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 4 chains
-| ... | 16 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 4 chains 16 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot
index 76968d0f35..efbfbc2c25 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 4 chains
-| ... | 24 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 4 chains 24 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot
index 7a9375cc87..acc6e19c0c 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 4 chains
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 4 chains 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot
index dd0475ff56..49fe257376 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 4 chains
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 4 chains 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot
index 7e4bf66cd0..98988a8782 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 6 chains
-| ... | 6 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 6 chains 6 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot
index 34b1e80609..a9273ce6e0 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 6 chains
-| ... | 6 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 6 chains 6 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot
index a55ea569bd..ed38bd9f0f 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 6 chains
-| ... | 12 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 6 chains 12 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domainsand MAC learning enabled. DUT1 tested with ${nic_name}.
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot
index 4d4a2af90b..474a300fb3 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 6 chains
-| ... | 12 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 6 chains 12 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot
index 1c87a9ad8b..e52a9499de 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 6 chains
-| ... | 24 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 6 chains 24 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot
index 3439e630a7..93d32c0857 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 8 chains
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 8 chains 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot
index 81b132d051..bc9efd7cf3 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 8 chains
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 8 chains 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot
index bde55e54c6..b0b3cd3fea 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 8 chains
-| ... | 16 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 8 chains 16 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot
index 61d908ee18..82c34ba477 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 8 chains
-| ... | 16 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 8 chains 16 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 7e57ec0bd4..b02bd4bb00 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 498416d416..1d34a5ad30 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 1bf5acec9f..4c352b74a7 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 0292704415..24ff94b5d7 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 780fd75e47..9ce93406db 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 8db6b11824..3c4b989582 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 24841525e6..a1afc3946d 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 930b7d61ea..f75f0211c9 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 8c8d689df9..e50e978d9c 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 3810bc9983..65f1be8880 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
index ec19a00b20..51ea08c814 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 9a0318a629..604219cc7c 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 3d8cbede5d..bf2bbf35c3 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
index df0db3d53f..c8b69778e4 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
index cee11ba512..0baad2c45a 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 99bf94f756..8079ee82b9 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 8944e8e6dc..8cd5b7eab9 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
 | | ... | ${encr_alg} | ${auth_alg} | ${laddr_ip4} | ${raddr_ip4}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
index c2682c93e5..d4636b14db 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 71ee884d62..613cf81226 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 4ad4239530..8f4e1315fd 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
index b0357f0a3b..7bce83ee7a 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 0c3df485e7..22ffc1fb5a 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 2d783dce31..f1eab2c3eb 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 0111bb3489..6dbd754489 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 6adb68e3ff..3fdea0534e 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
index f73220a70a..dcebf91b22 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 55353ca4ef..8d0f8f80bd 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 73c82ab219..d35997c5c4 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
index e846935258..894de6ef53 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 7b35217919..8684f2c742 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
index a63acb78e9..62f7a4e848 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 34fe8c687b..923d7793f5 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
index b4d7ee7202..f899526e1e 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 54d056e760..d15c43d199 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
index f9e20c79df..7a03e27026 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot
index aa14f5f17f..3b672cb501 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 20memif 10
-| ... | pipelines 1 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 20memif 10 \
+| ... | pipelines 1 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot
index f0cdb012ff..be9be72c28 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 20memif 10
-| ... | pipelines 1 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 20memif 10 \
+| ... | pipelines 1 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot
index a4509e4520..f70330d022 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 20 memif 10
-| ... | pipelines 20 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 20 memif 10 \
+| ... | pipelines 20 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot
index c130cd2843..7b90ee1256 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 10 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \
+| ... | pipeline 10 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot
index eb872deaa2..be38caf4f9 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 10 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \
+| ... | pipeline 10 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot
index 2c03217c5e..99dd4a3bed 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \
+| ... | pipeline 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot
index 26e8281448..42de5f3682 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \
+| ... | pipeline 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot
index bad6f4d784..93a86e0952 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 2 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \
+| ... | pipeline 2 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot
index f0f103d818..55d36087aa 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 2 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \
+| ... | pipeline 2 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot
index a63bf326d6..b8488dba2c 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 4 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \
+| ... | pipeline 4 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot
index bb43f21701..2dee783d0a 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 4 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \
+| ... | pipeline 4 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot
index 3fab95736f..5a6878ec4e 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 6 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \
+| ... | pipeline 6 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot
index ab829f3309..5619da47a2 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 6 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \
+| ... | pipeline 6 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot
index b3b4849173..d794125c35 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 8 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \
+| ... | pipeline 8 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot
index 6bf07895ef..a37472ecc4 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 8 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \
+| ... | pipeline 8 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot
index 93e9b042b8..890a9d33d8 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4memif 2
-| ... | pipelines 12 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \
+| ... | pipelines 12 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot
index a84af5dda0..b22a15fd70 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4memif 2
-| ... | pipelines 12 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \
+| ... | pipelines 12 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot
index 0615fa4c8f..7f87e4ce90 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4memif 2
-| ... | pipelines 16 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \
+| ... | pipelines 16 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot
index 32026bdf37..05d5b16ea5 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4memif 2
-| ... | pipelines 16 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \
+| ... | pipelines 16 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot
index 374a16274e..86cb4aaefa 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4 memif 2
-| ... | pipelines 20 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \
+| ... | pipelines 20 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot
index 880230a493..d3e061799f 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4memif 2
-| ... | pipelines 2 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \
+| ... | pipelines 2 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot
index 45740ffc29..f68cbbf2b8 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4memif 2
-| ... | pipelines 2 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \
+| ... | pipelines 2 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot
index ab2b083e89..6eeb515d11 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 2
-| ... | pipelines 4 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \
+| ... | pipelines 4 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot
index fe41245260..90416f60c0 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 2
-| ... | pipelines 4 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \
+| ... | pipelines 4 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot
index cfe4f12cf6..a59dfc4901 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4memif 2
-| ... | pipelines 8 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \
+| ... | pipelines 8 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot
index bbc8733a7a..b97c8b7763 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4memif 2
-| ... | pipelines 8 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \
+| ... | pipelines 8 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot
index 09d9de9f2e..fce6314c4c 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 8memif 4
-| ... | pipelines 4 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4 \
+| ... | pipelines 4 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot
index 2bd6990b31..7b6a93310d 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 8memif 4
-| ... | pipelines 4 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4 \
+| ... | pipelines 4 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot
index 388a3ed096..a1b8e16b00 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 8memif 4
-| ... | pipelines 16 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4 \
+| ... | pipelines 16 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot
index 64e1b1e7d0..d3721f16de 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 8memif 4
-| ... | pipelines 16 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4 \
+| ... | pipelines 16 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot
index 6c2bba6161..cab519e492 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 8 memif 4
-| ... | pipelines 24 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4 \
+| ... | pipelines 24 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot
index 0d265abd59..b5a1f3872d 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 8memif 4
-| ... | pipelines 8 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4 \
+| ... | pipelines 8 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot
index c41108040a..b04420185f 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 8memif 4
-| ... | pipelines 8 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4 \
+| ... | pipelines 8 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot
index 22ee0b7bc8..d577b722c6 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 12memif 6
-| ... | pipelines 12 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 12memif 6 \
+| ... | pipelines 12 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot
index f047294e12..3e062b08a2 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 12memif 6
-| ... | pipelines 12 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 12memif 6 \
+| ... | pipelines 12 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot
index 6a765bf489..92e5a664ed 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 12 memif 6
-| ... | pipelines 24 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 12memif 6 \
+| ... | pipelines 24 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot
index 709586ebe6..5f7280295a 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 12memif 6
-| ... | pipelines 1 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 12memif 6 \
+| ... | pipelines 1 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot
index 28252cdee1..b759be9119 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 12memif 6
-| ... | pipelines 1 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 12memif 6 \
+| ... | pipelines 1 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot
index 75701c4510..fde632079b 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 16memif 8
-| ... | pipelines 16 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 16memif 8 \
+| ... | pipelines 16 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot
index 612d31eeb6..a78f82ea1f 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 16memif 8
-| ... | pipelines 16 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 16memif 8 \
+| ... | pipelines 16 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot
index 39c7c827e1..d82987b755 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 16memif 8
-| ... | pipelines 8 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 16memif 8 \
+| ... | pipelines 8 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot
index f657ccc1a3..60b7f8fdae 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 16memif 8
-| ... | pipelines 8 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 16memif 8 \
+| ... | pipelines 8 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).