diff options
| author |   Peter Mikus <pmikus@cisco.com> | 2019-04-19 06:40:44 +0000 |
|---|---|---|
| committer | Peter Mikus <pmikus@cisco.com> | 2019-04-26 11:03:30 +0000 |
| commit | 780b65d82863effd53ccb0e0150c29d22522c61d (patch) | |
| tree | 0c5a5a48d067e337a754e34a6182470ef5aff9da /tests/vpp/perf/nfv_density/vm_vhost | |
| parent | f6e9d58ecd95789e0b3292983fafff223ec75a2c (diff) | |
NF density tests with dtc=0.5 and dtcr=2
Change-Id: Icff556142280ad0b6261e0a2bfb71672ee6b3807
Signed-off-by: Peter Mikus <pmikus@cisco.com>
Diffstat (limited to 'tests/vpp/perf/nfv_density/vm_vhost')
39 files changed, 5138 insertions, 0 deletions
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..99c5cda637 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 10R1C | 10VM1T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 20 vhost 10 chains 10 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-10c1n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${10} | nf_nodes=${1} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${10} | nf_nodes=${1} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..ec2c0aada8 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 10R1C | 10VM2T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 20 vhost 10 chains 10 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${1} +| ${nf_dtc}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-10c1n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${10} | nf_nodes=${1} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${10} | nf_nodes=${1} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..ae78f0b1db --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 1R6C | 6VM1T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 12 vhost 1 chain 6 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c6n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${1} | nf_nodes=${6} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${1} | nf_nodes=${6} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..b6cd526a48 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 1R6C | 6VM2T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 12 vhost 1 chain 6 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${1} +| ${nf_dtc}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c6n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${1} | nf_nodes=${6} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${1} | nf_nodes=${6} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..1bff538e49 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 1R8C | 8VM1T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 16 vhost 1 chain 8 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c8n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${1} | nf_nodes=${8} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${1} | nf_nodes=${8} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..8cdff1aa72 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 1R8C | 8VM2T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 16 vhost 1 chain 8 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${1} +| ${nf_dtc}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c8n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${1} | nf_nodes=${8} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${1} | nf_nodes=${8} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..eda55f4130 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 1R10C | 10VM1T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 20 vhost 1 chain 10 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544 + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c10n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${1} | nf_nodes=${10} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${1} | nf_nodes=${10} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..934082fb53 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 1R10C | 10VM2T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 20 vhost 1 chain 10 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544 + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${1} +| ${nf_dtc}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c10n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${1} | nf_nodes=${10} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${1} | nf_nodes=${10} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..8200434094 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 1R1C | 1VM1T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 2 vhost 1 chain 1 VM* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c1n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${1} | nf_nodes=${1} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${1} | nf_nodes=${1} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..01a992c2dd --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 1R1C | 1VM2T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 2 vhost 1 chain 1 VM* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${1} +| ${nf_dtc}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c1n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${1} | nf_nodes=${1} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${1} | nf_nodes=${1} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..e2b5f3de9f --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 1R2C | 2VM1T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 4 vhost 1 chain 2 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c2n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${1} | nf_nodes=${2} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${1} | nf_nodes=${2} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..6e787a23d9 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 1R2C | 2VM2T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 4 vhost 1 chain 2 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${1} +| ${nf_dtc}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c2n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${1} | nf_nodes=${2} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${1} | nf_nodes=${2} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..857989e6bd --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 1R4C | 4VM1T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 8 vhost 1 chains 4 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c4n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${1} | nf_nodes=${4} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${1} | nf_nodes=${4} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..2e61dc5be5 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 1R4C | 4VM2T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 8 vhost 1 chains 4 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${1} +| ${nf_dtc}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c4n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${1} | nf_nodes=${4} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${1} | nf_nodes=${4} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..0aa8e8923b --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 2R4C | 8VM1T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 16 vhost 2 chains 8 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c4n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${2} | nf_nodes=${4} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${2} | nf_nodes=${4} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..9de7998ec0 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 2R4C | 8VM2T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 16 vhost 2 chains 8 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${1} +| ${nf_dtc}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c4n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${2} | nf_nodes=${4} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${2} | nf_nodes=${4} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..3915b39100 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 2R6C | 12VM1T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 24 vhost 2 chains 12 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c6n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${2} | nf_nodes=${6} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${2} | nf_nodes=${6} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..1f76412b18 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 2R6C | 12VM2T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 24 vhost 2 chains 12 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${1} +| ${nf_dtc}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c6n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${2} | nf_nodes=${6} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${2} | nf_nodes=${6} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..2d80164991 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 2R8C | 16VM1T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 32 vhost 2 chains 16 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c8n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${2} | nf_nodes=${8} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${2} | nf_nodes=${8} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..0fb2ce1603 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr.robot @@ -0,0 +1,120 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 2R8C | 16VM2T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 32 vhost 2 chains 16 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${1} +| ${nf_dtc}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c8n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${2} | nf_nodes=${8} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${2} | nf_nodes=${8} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc04-1518B-1c-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc07-9000B-1c-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc10-IMIX-1c-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..5257ff08b5 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 2R1C | 2VM1T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 4 vhost 2 chains 2 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c1n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${2} | nf_nodes=${1} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${2} | nf_nodes=${1} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..b9c6dd7537 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 2R1C | 2VM2T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 4 vhost 2 chains 2 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${1} +| ${nf_dtc}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c1n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${2} | nf_nodes=${1} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${2} | nf_nodes=${1} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..9a035a27fc --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 2R2C | 4VM1T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 8 vhost 2 chains 4 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c2n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${2} | nf_nodes=${2} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${2} | nf_nodes=${2} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..e621e502b9 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 2R2C | 4VM2T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 8 vhost 2 chains 4 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${1} +| ${nf_dtc}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c2n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${2} | nf_nodes=${2} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${2} | nf_nodes=${2} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..923af98cf6 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 4R2C | 8VM1T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 16 vhost 4 chains 8 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c2n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${4} | nf_nodes=${2} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${4} | nf_nodes=${2} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..c841a90739 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 4R2C | 8VM2T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 16 vhost 4 chains 8 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${1} +| ${nf_dtc}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c2n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${4} | nf_nodes=${2} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${4} | nf_nodes=${2} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..400bd2274c --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 4R4C | 16VM1T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 32 vhost 4 chains 16 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c4n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${4} | nf_nodes=${4} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${4} | nf_nodes=${4} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..f6569d5712 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr.robot @@ -0,0 +1,120 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 4R4C | 16VM2T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 32 vhost 4 chains 16 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${1} +| ${nf_dtc}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c4n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${4} | nf_nodes=${4} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${4} | nf_nodes=${4} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc04-1518B-1c-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc07-9000B-1c-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc10-IMIX-1c-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..20d99015ea --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 4R1C | 4VM1T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 8 vhost 4 chains 4 VM* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c1n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${4} | nf_nodes=${1} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${4} | nf_nodes=${1} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..eb696acc6b --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 4R1C | 4VM2T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 8 vhost 4 chains 4 VM* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${1} +| ${nf_dtc}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c1n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${4} | nf_nodes=${1} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${4} | nf_nodes=${1} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..36e69e6e64 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 6R1C | 6VM1T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 12 vhost 6 chains 6 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c1n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${6} | nf_nodes=${1} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${6} | nf_nodes=${1} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..9e6d7b8cf5 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 6R1C | 6VM2T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 12 vhost 6 chains 6 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${1} +| ${nf_dtc}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c1n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${6} | nf_nodes=${1} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${6} | nf_nodes=${1} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..00ce5360ff --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 6R2C | 12VM1T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 24 vhost 6 chains 12 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c2n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${6} | nf_nodes=${2} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${6} | nf_nodes=${2} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..2daeae488a --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 6R2C | 12VM2T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 24 vhost 6 chains 12 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${1} +| ${nf_dtc}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c2n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${6} | nf_nodes=${2} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${6} | nf_nodes=${2} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..0459689ea9 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 8R1C | 8VM1T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 16 vhost 8 chains 8 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c1n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${8} | nf_nodes=${1} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${8} | nf_nodes=${1} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..7da25a3ab5 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 8R1C | 8VM2T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 16 vhost 8 chains 8 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${1} +| ${nf_dtc}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c1n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${8} | nf_nodes=${1} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${8} | nf_nodes=${1} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..4bbdacaead --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 8R2C | 16VM1T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 32 vhost 8 chains 16 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c2n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${8} | nf_nodes=${2} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${8} | nf_nodes=${2} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..73fdb5495e --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr.robot @@ -0,0 +1,120 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 8R2C | 16VM2T +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | ${nic_name} +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation +| ... | *RFC2544: Pkt throughput L2BD test cases with 32 vhost 8 chains 16 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ +| ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${1} +| ${nf_dtc}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c2n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${8} | nf_nodes=${2} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${8} | nf_nodes=${2} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc04-1518B-1c-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc07-9000B-1c-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc10-IMIX-1c-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/regenerate_testcases.py b/tests/vpp/perf/nfv_density/vm_vhost/chain/regenerate_testcases.py new file mode 100755 index 0000000000..2632018a80 --- /dev/null +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/regenerate_testcases.py @@ -0,0 +1,18 @@ +#!/usr/bin/env python + +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +from resources.libraries.python.autogen.Regenerator import Regenerator + +Regenerator().regenerate_glob("*.robot") |