CSIT-661: re-add vring256 tuned CFS for vpp workers and guest-testpmd

1. add vhost tests (L2XBD, L2XC and IP4BASE) with vring set to 256 and
   tuned CFS setting
2. add vhost tests (L2XBD, L2XC and IP4BASE) with vring set to 256 and
   default CFS setting

Change-Id: I25aae6839d3e621316d35f5c9525389a6faabd56
Signed-off-by: Jan Gelety <jgelety@cisco.com>

1 files changed, 350 insertions, 0 deletions

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot
new file mode 100644
index 0000000000..2e4754f553
--- /dev/null
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot
@@ -0,0 +1,350 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Library | resources.libraries.python.QemuUtils
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
+| ... | NIC_Intel-X520-DA2 | DOT1Q | L2BDMACLRN | BASE | VHOST | VM
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L3 | Intel-X520-DA2
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| Test Teardown | Tear down performance test with vhost and VM with dpdk-testpmd
+| ... | ${min_rate}pps | ${framesize} | ${traffic_profile}
+| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
+| ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs}
+| ...
+| Documentation | *RFC2544: Packet throughput IP4 test cases with vhost*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
+| ... | routing and two static IPv4 /24 route entries. Qemu Guest is connected
+| ... | to VPP via vhost-user interfaces. Guest is running DPDK testpmd
+| ... | interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9
+| ... | and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages),
+| ... | 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is
+| ... | set to mac, rxd/txd=256, burst=64. Scheduler policy is set to SCHED_RR
+| ... | with priority 1 for all Qemu CPUs. DUT1, DUT2 are tested with 2p10GE
+| ... | NIC X520 Niantic by Intel.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
+| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
+| ... | of packets transmitted. NDR and PDR are discovered for different
+| ... | Ethernet L2 frame sizes using either binary search or linear search
+| ... | algorithms with configured starting rate and final step that determines
+| ... | throughput measurement resolution. Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
+| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+| ${avg_imix_framesize}= | ${357.833}
+# X520-DA2 bandwidth limit
+| ${s_limit} | ${10000000000}
+# Socket names
+| ${sock1}= | /tmp/sock-1-1
+| ${sock2}= | /tmp/sock-1-2
+# FIB tables
+| ${fib_table_1}= | 100
+| ${fib_table_2}= | 101
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip4-ip4src253
+
+*** Keywords ***
+| Discover NDR or PDR for IPv4 forwarding with VM
+| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type}
+| | ...
+| | [Documentation]
+| | ... | [Cfg] DUT runs IP4 routing config with required number of threads,\
+| | ... | phy cores and receive queues per NIC port.
+| | ... | [Ver] Find NDR or PDR for defined frame size using binary search\
+| | ... | start at 10GE linerate with specified step.
+| | ...
+| | ... | *Arguments:*
+| | ... | - wt - Number of worker threads to be used. Type: integer
+| | ... | - rxq - Number of Rx queues to be used. Type: integer
+| | ... | - framesize - L2 Frame Size [B]. Type: integer
+| | ... | - min_rate - Lower limit of search [pps]. Type: float
+| | ... | - search_type - Type of the search - non drop rate (NDR) or partial
+| | ... | drop rare (PDR). Type: string
+| | ...
+| | Set Test Variable | ${perf_qemu_qsz} | 256
+| | Set Test Variable | ${use_tuned_cfs} | ${True}
+| | Set Test Variable | ${framesize}
+| | Set Test Variable | ${min_rate}
+| | ${get_framesize}= | Set Variable If
+| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize}
+| | ... |  ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | ${dut1_vm_refs}= | Create Dictionary
+| | ${dut2_vm_refs}= | Create Dictionary
+| | Set Test Variable | ${dut1_vm_refs}
+| | Set Test Variable | ${dut2_vm_refs}
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding with vhost in 3-node circular topology
+| | ... | ${sock1} | ${sock2}
+| | ${vm1}= | And Configure guest VM with dpdk-testpmd-mac connected via vhost-user
+| | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM1 | ${dut1_vif1_mac}
+| | ... | ${dut1_vif2_mac}
+| | Set To Dictionary | ${dut1_vm_refs} | DUT1_VM1 | ${vm1}
+| | ${vm2}= | And Configure guest VM with dpdk-testpmd-mac connected via vhost-user
+| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
+| | ... | ${dut2_vif2_mac}
+| | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
+| | Run Keyword If | '${search_type}' == 'NDR'
+| | ... | Find NDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ELSE IF | '${search_type}' == 'PDR'
+| | ... | Find PDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC
+| | ...
+| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM
+| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR
+
+| tc02-64B-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | ...
+| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM
+| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR
+
+| tc03-1518B-1t1c--ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC
+| | ...
+| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM
+| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR
+
+| tc04-1518B-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | ...
+| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM
+| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR
+
+| tc05-IMIX-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\
+| | ... | 10GE linerate, step 10kpps.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC
+| | ...
+| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM
+| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR
+
+| tc06-IMIX-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\
+| | ... | 10GE linerate, step 10kpps, LT=0.5%.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | ...
+| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM
+| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR
+
+| tc07-64B-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ...
+| | [Tags] | 64B | 2T2C | STHREAD | NDRDISC
+| | ...
+| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM
+| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR
+
+| tc08-64B-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ...
+| | [Tags] | 64B | 2T2C | STHREAD | PDRDISC | SKIP_PATCH
+| | ...
+| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM
+| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR
+
+| tc09-1518B-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ...
+| | [Tags] | 1518B | 2T2C | STHREAD | NDRDISC | SKIP_PATCH
+| | ...
+| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM
+| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR
+
+| tc10-1518B-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ...
+| | [Tags] | 1518B | 2T2C | STHREAD | PDRDISC | SKIP_PATCH
+| | ...
+| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM
+| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR
+
+| tc11-IMIX-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\
+| | ... | 10GE linerate, step 10kpps.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | STHREAD | NDRDISC | SKIP_PATCH
+| | ...
+| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM
+| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR
+
+| tc12-IMIX-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\
+| | ... | 10GE linerate, step 10kpps.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | STHREAD | PDRDISC | SKIP_PATCH
+| | ...
+| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM
+| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR
+
+| tc13-64B-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ...
+| | [Tags] | 64B | 4T4C | STHREAD | NDRDISC
+| | ...
+| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM
+| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR
+
+| tc14-64B-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ...
+| | [Tags] | 64B | 4T4C | STHREAD | PDRDISC | SKIP_PATCH
+| | ...
+| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM
+| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR
+
+| tc15-1518B-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ...
+| | [Tags] | 1518B | 4T4C | STHREAD | NDRDISC | SKIP_PATCH
+| | ...
+| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM
+| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR
+
+| tc16-1518B-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ...
+| | [Tags] | 1518B | 4T4C | STHREAD | PDRDISC | SKIP_PATCH
+| | ...
+| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM
+| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR
+
+| tc17-IMIX-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\
+| | ... | 10GE linerate, step 10kpps.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | STHREAD | NDRDISC | SKIP_PATCH
+| | ...
+| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM
+| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR
+
+| tc18-IMIX-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\
+| | ... | 10GE linerate, step 10kpps, LT=0.5%.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | STHREAD | PDRDISC | SKIP_PATCH
+| | ...
+| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM
+| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR