CSIT-1097: Migrate Vts suite to NDRPDR

Change-Id: Iaac913bb4b15d743a2e9d565e25d31c089cee3e8
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

1 files changed, 163 insertions, 0 deletions

diff --git a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr.robot
new file mode 100644
index 0000000000..c4491f29e6
--- /dev/null
+++ b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr.robot
@@ -0,0 +1,163 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Library | resources.libraries.python.QemuUtils
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
+| ... | VHOST | VM | VHOST_1024 | VTS | ACL_PERMIT
+| ...
+| Suite Setup | Run Keywords
+| ... | Set up 3-node performance topology with DUT's NIC model
+| ... | L3 | Intel-X520-DA2
+| ... | AND | Set up performance test suite with ACL
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| Test Teardown | Tear down mrr test with vhost and VM with dpdk-testpmd and ACL
+| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *Raw results L2BD test cases with VXLANoIPv4 and vhost*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
+| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-
+| ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via
+| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting
+| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M
+| ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores
+| ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to
+| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520
+| ... | Niantic by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
+| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+
+*** Variables ***
+| ${perf_qemu_qsz}= | 1024
+# X520-DA2 bandwidth limit
+| ${s_limit}= | ${10000000000}
+| ${overhead}= | ${50}
+# Socket names
+| ${dut1_bd_id1}= | 1
+| ${dut1_bd_id2}= | 2
+| ${dut2_bd_id1}= | 1
+| ${sock1}= | /tmp/sock-1-${dut1_bd_id1}
+| ${sock2}= | /tmp/sock-1-${dut1_bd_id2}
+# Traffic profile:
+| ${traffic_profile} | trex-sl-ethip4-vxlansrc253
+
+| ${acl_type}= | permit
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | ... | *Arguments:*
+| | ... | - framesize - L2 Frame Size [B]. Type: integer
+| | ... | - phy_cores - Number of worker threads to be used. Type: integer
+| | ... | - rxq - Number of Rx queues to be used. Type: integer
+| | ... | - acl_type - FIXME.
+| | ...
+| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | Add PCI devices to all DUTs
+| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
+| | ... | ${s_limit} | ${framesize} | overhead=${overhead}
+| | And Apply startup configuration on all VPP DUTs
+| | &{vxlan1} = | Create Dictionary | vni=24 | vtep=172.17.0.2
+| | &{vxlan2} = | Create Dictionary | vni=24 | vtep=172.27.0.2
+| | @{dut1_vxlans} = | Create List | ${vxlan1}
+| | @{dut2_vxlans} = | Create List | ${vxlan2}
+| | Set interfaces in path in 3-node circular topology up
+| | Configure vhost interfaces for L2BD forwarding | ${dut1}
+| | ... | ${sock1} | ${sock2}
+| | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology
+| | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2
+| | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16
+| | @{permit_list} = | Create List | 10.0.0.1/32 | 10.0.0.2/32
+| | Run Keyword If | '${acl_type}' != '${EMPTY}'
+| | ... | Configure ACLs on a single interface | ${dut1} | ${dut1_if2} | input
+| | ... | ${acl_type} | @{permit_list}
+| | ${vm1} = | And Configure guest VM with dpdk-testpmd connected via vhost-user
+| | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM1
+| | ... | jumbo_frames=${jumbo}
+| | Set Test Variable | &{dut1_vm_refs} | DUT1_VM1=${vm1}
+| | Then Traffic should pass with maximum rate
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-114B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr
+| | [Tags] | 114B | 1C
+| | framesize=${114} | phy_cores=${1}
+
+| tc02-114B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr
+| | [Tags] | 114B | 2C
+| | framesize=${114} | phy_cores=${2}
+
+| tc03-114B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr
+| | [Tags] | 114B | 4C
+| | framesize=${114} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr
+| | [Tags] | 1518B | 1C
+| | framesize=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr
+| | [Tags] | 1518B | 2C
+| | framesize=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr
+| | [Tags] | 1518B | 4C
+| | framesize=${1518} | phy_cores=${4}
+
+| tc07-9000B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr
+| | [Tags] | 9000B | 1C
+| | framesize=${9000} | phy_cores=${1}
+
+| tc08-9000B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr
+| | [Tags] | 9000B | 2C
+| | framesize=${9000} | phy_cores=${2}
+
+| tc09-9000B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr
+| | [Tags] | 9000B | 4C
+| | framesize=${9000} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr
+| | [Tags] | IMIX | 1C
+| | framesize=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr
+| | [Tags] | IMIX | 2C
+| | framesize=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr
+| | [Tags] | IMIX | 4C
+| | framesize=IMIX_v4_1 | phy_cores=${4}