VTS: Unify the tests

- Converting to 2n as they were always 2n (with l2xc on 3rd node)
- Removing KW and converting to layered approach

Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: Ie349c50f72eb362815e7c5ede076d421ab386e76

1 files changed, 0 insertions, 159 deletions

diff --git a/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot
deleted file mode 100644
index 4c9046930e..0000000000
--- a/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot
+++ /dev/null
@@ -1,159 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
-| ... | VHOST | VM | VHOST_1024 | VTS | ACL_PERMIT | DRV_VFIO_PCI
-|
-| Suite Setup | Setup suite single link | performance
-| Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test
-| Test Teardown | Tear down test | performance | vhost
-|
-| Test Template | Local Template
-|
-| Documentation | *RFC2544: Packet throughput L2BD test cases with VXLANoIPv4
-| ... | and vhost*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-
-| ... | domain and MAC learning enabled. Qemu VNFs are connected \
-| ... | to VPP via vhost-user interfaces. Guest is running VPP l2xc \
-| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
-| ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, 253 flows per flow-group) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
-| ... | payload. MAC addresses are matching MAC addresses of the TG node
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vfio-pci
-| ${osi_layer}= | L3
-| ${overhead}= | ${50}
-| ${nf_dtcr}= | ${1}
-| ${nf_dtc}= | ${1}
-| ${nf_chains}= | ${1}
-| ${nf_nodes}= | ${1}
-| ${dut1_bd_id1}= | 1
-| ${dut1_bd_id2}= | 2
-| ${dut2_bd_id1}= | 1
-# Traffic profile:
-| ${traffic_profile}=
-| ... | trex-sl-ethip4vxlan-ip4src${nf_chains}udpsrcrnd
-| ${acl_type}= | permit
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - L2 Frame Size [B]. Type: integer
-| | ... | - phy_cores - Number of worker threads to be used. Type: integer
-| | ... | - rxq - Number of Rx queues to be used. Type: integer
-| | ... | - acl_type - FIXME.
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | &{vxlan1} = | Create Dictionary | vni=0 | vtep=172.17.0.2
-| | &{vxlan2} = | Create Dictionary | vni=0 | vtep=172.27.0.2
-| | @{dut1_vxlans} = | Create List | ${vxlan1}
-| | @{dut2_vxlans} = | Create List | ${vxlan2}
-| | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology
-| | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2
-| | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16
-| | @{permit_list} = | Create List | 10.0.0.1/32 | 10.0.0.2/32
-| | Run Keyword If | '${acl_type}' != '${EMPTY}'
-| | ... | Configure ACLs on a single interface | ${dut1} | ${dut1_if2} | input
-| | ... | ${acl_type} | @{permit_list}
-| | And Configure chains of NFs connected via vhost-user on single node
-| | ... | node=DUT1 | nf_chains=${nf_chains} | nf_nodes=${nf_nodes}
-| | ... | jumbo=${jumbo} | use_tuned_cfs=${False} | auto_scale=${True}
-| | ... | vnf=vpp_chain_l2xc
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| tc01-114B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr
-| | [Tags] | 114B | 1C
-| | frame_size=${114} | phy_cores=${1}
-
-| tc02-114B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr
-| | [Tags] | 114B | 2C
-| | frame_size=${114} | phy_cores=${2}
-
-| tc03-114B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr
-| | [Tags] | 114B | 4C
-| | frame_size=${114} | phy_cores=${4}
-
-| tc04-1518B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}