CSIT-1097: Migrate Vts suite to NDRPDR

Change-Id: Iaac913bb4b15d743a2e9d565e25d31c089cee3e8
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

8 files changed, 1017 insertions, 284 deletions

diff --git a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-2vhostvr1024-1vm-ndrpdrdisc.robot
deleted file mode 100644
index ef8722b62a..0000000000
--- a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-2vhostvr1024-1vm-ndrpdrdisc.robot
+++ /dev/null
@@ -1,284 +0,0 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| Library | resources.libraries.python.QemuUtils
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
-| ... | VHOST | VM | VHOST_1024 | VTS
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 3-node performance topology with DUT's NIC model
-| ... | L3 | Intel-X520-DA2
-| ... | AND | Set up performance test suite with ACL
-| Suite Teardown | Tear down 3-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Tear down performance test with vhost and VM with dpdk-testpmd and ACL
-| ... | ${min_rate}pps | ${framesize} | ${traffic_profile}
-| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
-| ...
-| Test Template | Local template
-| ...
-| Documentation | *RFC2544: Packet throughput L2BD test cases with VXLANoIPv4
-| ... | and vhost*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-
-| ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via
-| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting
-| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M
-| ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores
-| ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to
-| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520
-| ... | Niantic by Intel.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
-| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
-| ... | of packets transmitted. NDR and PDR are discovered for different
-| ... | Ethernet L2 frame sizes using either binary search or linear search
-| ... | algorithms with configured starting rate and final step that determines
-| ... | throughput measurement resolution. Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, 253 flows per flow-group) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
-| ... | payload. MAC addresses are matching MAC addresses of the TG node
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
-
-*** Variables ***
-| ${perf_qemu_qsz}= | 1024
-# X520-DA2 bandwidth limit
-| ${s_limit}= | ${10000000000}
-| ${vxlan_overhead}= | ${50}
-# Socket names
-| ${dut1_bd_id1}= | 1
-| ${dut1_bd_id2}= | 2
-| ${dut2_bd_id1}= | 1
-| ${sock1}= | /tmp/sock-1-${dut1_bd_id1}
-| ${sock2}= | /tmp/sock-1-${dut1_bd_id2}
-# Traffic profile:
-| ${traffic_profile} | trex-sl-ethip4-vxlansrc253
-| ${min_rate}= | ${10000}
-
-
-*** Keywords ***
-| Configure ACLs on a single interface
-| | [Documentation]
-| | ... | Configure ACL
-| | ...
-| | ... | *Arguments:*
-| | ... | - dut - DUT node. Type: string
-| | ... | - dut_if - DUT node interface name. Type: string
-| | ... | - acl_apply_type - To what path apply the ACL - input or output.
-| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect.
-| | ... | - subnets - Subnets to apply the specific ACL. Type: list
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Configure ACLs on a single interface \| ${nodes['DUT1']}
-| | ... | \| ... \| GigabitEthernet0/7/0 \| input \| permit | 0.0.0.0/0
-| | ...
-| | [Arguments] | ${dut} | ${dut_if} | ${acl_apply_type} | ${acl_action}
-| | ... | @{subnets}
-| | Set Test variable | ${acl} | ${EMPTY}
-| | :FOR | ${subnet} | IN | @{subnets}
-| | | ${acl}= | Run Keyword If | '${acl}' == '${EMPTY}'
-| | | ... | Set Variable | ipv4 ${acl_action} src ${subnet}
-| | | ... | ELSE
-| | | ... | Catenate | SEPARATOR=, | ${acl}
-| | | ... | ipv4 ${acl_action} src ${subnet}
-| | Add Replace Acl Multi Entries | ${dut} | rules=${acl}
-| | @{acl_list}= | Create List | ${0}
-| | Set Acl List For Interface | ${dut} | ${dut_if} | ${acl_apply_type}
-| | ... | ${acl_list}
-
-
-*** Keywords ***
-| Local template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | ...
-| | ... | *Arguments:*
-| | ... | - phy_cores - Number of worker threads to be used. Type: integer
-| | ... | - rxq - Number of Rx queues to be used. Type: integer
-| | ... | - pkt_framesize - L2 Frame Size [B]. Type: integer
-| | ... | - search_type - Type of the search - non drop rate (NDR) or partial
-| | ... | drop rare (PDR). Type: string
-| | ...
-| | [Arguments] | ${phy_cores} | ${pkt_framesize} | ${search_type}
-| | ... | ${acl_type}=${EMPTY} | ${rxq}=${None}
-| | ...
-| | ${binary_min}= | Set Variable | ${min_rate}
-| | ${threshold}= | Set Variable | ${min_rate}
-| | ${max_pkt_size}= | Set Variable If | '${pkt_framesize}' == 'IMIX_v4_1' |
-| | ... | ${1500 + ${vxlan_overhead}} | ${pkt_framesize + ${vxlan_overhead}}
-| | ${max_rate}= | Calculate pps | ${s_limit} | ${max_pkt_size}
-| | ${binary_max}= | Set Variable | ${max_rate}
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | Add PCI devices to all DUTs
-| | And Run Keyword If | ${max_pkt_size} < ${1522}
-| | ... | Add no multi seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | &{vxlan1}= | Create Dictionary | vni=24 | vtep=172.17.0.2
-| | &{vxlan2}= | Create Dictionary | vni=24 | vtep=172.27.0.2
-| | @{dut1_vxlans}= | Create List | ${vxlan1}
-| | @{dut2_vxlans}= | Create List | ${vxlan2}
-| | ${jumbo_frames}= | Set Variable If
-| | ... | ${max_pkt_size} < ${1522} | ${False} | ${True}
-| | Set interfaces in path in 3-node circular topology up
-| | Configure vhost interfaces for L2BD forwarding | ${dut1}
-| | ... | ${sock1} | ${sock2}
-| | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology
-| | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2
-| | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16
-| | @{permit_list}= | Create List | 10.0.0.1/32 | 10.0.0.2/32
-| | Run Keyword If | '${acl_type}' != '${EMPTY}'
-| | ... | Configure ACLs on a single interface | ${dut1} | ${dut1_if2} | input
-| | ... | ${acl_type} | @{permit_list}
-| | ${vm1}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
-| | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM1
-| | ... | jumbo_frames=${jumbo_frames}
-| | Set Test Variable | &{dut1_vm_refs} | DUT1_VM1=${vm1}
-| | Set Test Variable | ${framesize} | ${pkt_framesize}
-| | ${pkt_framesize}= | Set Variable If | '${pkt_framesize}' == 'IMIX_v4_1' |
-| | ... | ${pkt_framesize} | ${pkt_framesize + ${vxlan_overhead}}
-| | Run Keyword If | '${search_type}' == 'NDR'
-| | ... | Find NDR using binary search and pps
-| | ... | ${pkt_framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
-| | ... | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ELSE IF | '${search_type}' == 'PDR'
-| | ... | Find PDR using binary search and pps
-| | ... | ${pkt_framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
-| | ... | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
-
-*** Test Cases ***
-| tc01-64B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
-| | [Tags] | 64B | 2C | NDRDISC
-| | phy_cores=${2} | pkt_framesize=${64} | search_type=NDR
-
-| tc02-64B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-pdrdisc
-| | [Tags] | 64B | 2C | PDRDISC
-| | phy_cores=${2} | pkt_framesize=${64} | search_type=PDR
-
-| tc03-150B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
-| | [Tags] | 150B | 2C | NDRDISC
-| | phy_cores=${2} | pkt_framesize=${150} | search_type=NDR
-
-| tc04-150B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-pdrdisc
-| | [Tags] | 150B | 2C | PDRDISC
-| | phy_cores=${2} | pkt_framesize=${150} | search_type=PDR
-
-| tc05-200B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
-| | [Tags] | 200B | 2C | NDRDISC
-| | phy_cores=${2} | pkt_framesize=${200} | search_type=NDR
-
-| tc06-200B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-pdrdisc
-| | [Tags] | 200B | 2C | PDRDISC
-| | phy_cores=${2} | pkt_framesize=${200} | search_type=PDR
-
-| tc07-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
-| | [Tags] | IMIX | 2C | NDRDISC
-| | phy_cores=${2} | pkt_framesize=IMIX_v4_1 | search_type=NDR
-
-| tc08-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-pdrdisc
-| | [Tags] | IMIX | 2C | PDRDISC
-| | phy_cores=${2} | pkt_framesize=IMIX_v4_1 | search_type=PDR
-
-| tc09-64B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-ndrdisc
-| | [Tags] | 64B | 2C | NDRDISC | ACL_PERMIT
-| | phy_cores=${2} | pkt_framesize=${64} | search_type=NDR
-| | ... | acl_type=permit
-
-| tc10-64B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-pdrdisc
-| | [Tags] | 64B | 2C | PDRDISC | ACL_PERMIT
-| | phy_cores=${2} | pkt_framesize=${64} | search_type=PDR
-| | ... | acl_type=permit
-
-| tc11-150B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-ndrdisc
-| | [Tags] | 150B | 2C | NDRDISC | ACL_PERMIT
-| | phy_cores=${2} | pkt_framesize=${150} | search_type=NDR
-| | ... | acl_type=permit
-
-| tc12-150B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-pdrdisc
-| | [Tags] | 150B | 2C | PDRDISC | ACL_PERMIT
-| | phy_cores=${2} | pkt_framesize=${150} | search_type=PDR
-| | ... | acl_type=permit
-
-| tc13-200B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-ndrdisc
-| | [Tags] | 200B | 2C | NDRDISC | ACL_PERMIT
-| | phy_cores=${2} | pkt_framesize=${200} | search_type=NDR
-| | ... | acl_type=permit
-
-| tc14-200B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-pdrdisc
-| | [Tags] | 200B | 2C | PDRDISC | ACL_PERMIT
-| | phy_cores=${2} | pkt_framesize=${200} | search_type=PDR
-| | ... | acl_type=permit
-
-| tc15-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-ndrdisc
-| | [Tags] | IMIX | 2C | NDRDISC | ACL_PERMIT
-| | phy_cores=${2} | pkt_framesize=IMIX_v4_1 | search_type=NDR
-| | ... | acl_type=permit
-
-| tc16-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-pdrdisc
-| | [Tags] | IMIX | 2C | PDRDISC | ACL_PERMIT
-| | phy_cores=${2} | pkt_framesize=IMIX_v4_1 | search_type=PDR
-| | ... | acl_type=permit
-
-| tc17-64B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-ndrdisc
-| | [Tags] | 64B | 2C | NDRDISC | ACL_PERMIT_REFLECT
-| | phy_cores=${2} | pkt_framesize=${64} | search_type=NDR
-| | ... | acl_type=permit+reflect
-
-| tc18-64B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-pdrdisc
-| | [Tags] | 64B | 2C | PDRDISC | ACL_PERMIT_REFLECT
-| | phy_cores=${2} | pkt_framesize=${64} | search_type=PDR
-| | ... | acl_type=permit+reflect
-
-| tc19-150B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-ndrdisc
-| | [Tags] | 150B | 2C | NDRDISC | ACL_PERMIT_REFLECT
-| | phy_cores=${2} | pkt_framesize=${150} | search_type=NDR
-| | ... | acl_type=permit+reflect
-
-| tc20-150B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-pdrdisc
-| | [Tags] | 150B | 2C | PDRDISC | ACL_PERMIT_REFLECT
-| | phy_cores=${2} | pkt_framesize=${150} | search_type=PDR
-| | ... | acl_type=permit+reflect
-
-| tc21-200B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-ndrdisc
-| | [Tags] | 200B | 2C | NDRDISC | ACL_PERMIT_REFLECT
-| | phy_cores=${2} | pkt_framesize=${200} | search_type=NDR
-| | ... | acl_type=permit+reflect
-
-| tc22-200B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-pdrdisc
-| | [Tags] | 200B | 2C | PDRDISC | ACL_PERMIT_REFLECT
-| | phy_cores=${2} | pkt_framesize=${200} | search_type=PDR
-| | ... | acl_type=permit+reflect
-
-| tc23-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-ndrdisc
-| | [Tags] | IMIX | 2C | NDRDISC | ACL_PERMIT_REFLECT
-| | phy_cores=${2} | pkt_framesize=IMIX_v4_1 | search_type=NDR
-| | ... | acl_type=permit+reflect
-
-| tc24-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-pdrdisc
-| | [Tags] | IMIX | 2C | PDRDISC | ACL_PERMIT_REFLECT
-| | phy_cores=${2} | pkt_framesize=IMIX_v4_1 | search_type=PDR
-| | ... | acl_type=permit+reflect
diff --git a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr.robot
new file mode 100644
index 0000000000..c4491f29e6
--- /dev/null
+++ b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr.robot
@@ -0,0 +1,163 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Library | resources.libraries.python.QemuUtils
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
+| ... | VHOST | VM | VHOST_1024 | VTS | ACL_PERMIT
+| ...
+| Suite Setup | Run Keywords
+| ... | Set up 3-node performance topology with DUT's NIC model
+| ... | L3 | Intel-X520-DA2
+| ... | AND | Set up performance test suite with ACL
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| Test Teardown | Tear down mrr test with vhost and VM with dpdk-testpmd and ACL
+| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *Raw results L2BD test cases with VXLANoIPv4 and vhost*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
+| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-
+| ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via
+| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting
+| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M
+| ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores
+| ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to
+| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520
+| ... | Niantic by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
+| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+
+*** Variables ***
+| ${perf_qemu_qsz}= | 1024
+# X520-DA2 bandwidth limit
+| ${s_limit}= | ${10000000000}
+| ${overhead}= | ${50}
+# Socket names
+| ${dut1_bd_id1}= | 1
+| ${dut1_bd_id2}= | 2
+| ${dut2_bd_id1}= | 1
+| ${sock1}= | /tmp/sock-1-${dut1_bd_id1}
+| ${sock2}= | /tmp/sock-1-${dut1_bd_id2}
+# Traffic profile:
+| ${traffic_profile} | trex-sl-ethip4-vxlansrc253
+
+| ${acl_type}= | permit
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | ... | *Arguments:*
+| | ... | - framesize - L2 Frame Size [B]. Type: integer
+| | ... | - phy_cores - Number of worker threads to be used. Type: integer
+| | ... | - rxq - Number of Rx queues to be used. Type: integer
+| | ... | - acl_type - FIXME.
+| | ...
+| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | Add PCI devices to all DUTs
+| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
+| | ... | ${s_limit} | ${framesize} | overhead=${overhead}
+| | And Apply startup configuration on all VPP DUTs
+| | &{vxlan1} = | Create Dictionary | vni=24 | vtep=172.17.0.2
+| | &{vxlan2} = | Create Dictionary | vni=24 | vtep=172.27.0.2
+| | @{dut1_vxlans} = | Create List | ${vxlan1}
+| | @{dut2_vxlans} = | Create List | ${vxlan2}
+| | Set interfaces in path in 3-node circular topology up
+| | Configure vhost interfaces for L2BD forwarding | ${dut1}
+| | ... | ${sock1} | ${sock2}
+| | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology
+| | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2
+| | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16
+| | @{permit_list} = | Create List | 10.0.0.1/32 | 10.0.0.2/32
+| | Run Keyword If | '${acl_type}' != '${EMPTY}'
+| | ... | Configure ACLs on a single interface | ${dut1} | ${dut1_if2} | input
+| | ... | ${acl_type} | @{permit_list}
+| | ${vm1} = | And Configure guest VM with dpdk-testpmd connected via vhost-user
+| | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM1
+| | ... | jumbo_frames=${jumbo}
+| | Set Test Variable | &{dut1_vm_refs} | DUT1_VM1=${vm1}
+| | Then Traffic should pass with maximum rate
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-114B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr
+| | [Tags] | 114B | 1C
+| | framesize=${114} | phy_cores=${1}
+
+| tc02-114B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr
+| | [Tags] | 114B | 2C
+| | framesize=${114} | phy_cores=${2}
+
+| tc03-114B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr
+| | [Tags] | 114B | 4C
+| | framesize=${114} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr
+| | [Tags] | 1518B | 1C
+| | framesize=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr
+| | [Tags] | 1518B | 2C
+| | framesize=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr
+| | [Tags] | 1518B | 4C
+| | framesize=${1518} | phy_cores=${4}
+
+| tc07-9000B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr
+| | [Tags] | 9000B | 1C
+| | framesize=${9000} | phy_cores=${1}
+
+| tc08-9000B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr
+| | [Tags] | 9000B | 2C
+| | framesize=${9000} | phy_cores=${2}
+
+| tc09-9000B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr
+| | [Tags] | 9000B | 4C
+| | framesize=${9000} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr
+| | [Tags] | IMIX | 1C
+| | framesize=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr
+| | [Tags] | IMIX | 2C
+| | framesize=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr
+| | [Tags] | IMIX | 4C
+| | framesize=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot
new file mode 100644
index 0000000000..6aa5a8370f
--- /dev/null
+++ b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot
@@ -0,0 +1,170 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Library | resources.libraries.python.QemuUtils
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
+| ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
+| ... | VHOST | VM | VHOST_1024 | VTS | ACL_PERMIT
+| ...
+| Suite Setup | Run Keywords
+| ... | Set up 3-node performance topology with DUT's NIC model
+| ... | L3 | Intel-X520-DA2
+| ... | AND | Set up performance test suite with ACL
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| Test Teardown | Tear down performance test with vhost and VM with dpdk-testpmd and ACL
+| ... | ${min_rate}pps | ${framesize} | ${traffic_profile}
+| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *RFC2544: Packet throughput L2BD test cases with VXLANoIPv4
+| ... | and vhost*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
+| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-
+| ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via
+| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting
+| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M
+| ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores
+| ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to
+| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520
+| ... | Niantic by Intel.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
+| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
+| ... | of packets transmitted. NDR and PDR are discovered for different
+| ... | Ethernet L2 frame sizes using MLRsearch library.
+| ... | Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
+| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+
+*** Variables ***
+| ${perf_qemu_qsz}= | 1024
+# X520-DA2 bandwidth limit
+| ${s_limit}= | ${10000000000}
+| ${overhead}= | ${50}
+# Socket names
+| ${dut1_bd_id1}= | 1
+| ${dut1_bd_id2}= | 2
+| ${dut2_bd_id1}= | 1
+| ${sock1}= | /tmp/sock-1-${dut1_bd_id1}
+| ${sock2}= | /tmp/sock-1-${dut1_bd_id2}
+# Traffic profile:
+| ${traffic_profile} | trex-sl-ethip4-vxlansrc253
+| ${min_rate}= | ${10000}
+
+| ${acl_type}= | permit
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.
+| | ...
+| | ... | *Arguments:*
+| | ... | - framesize - L2 Frame Size [B]. Type: integer
+| | ... | - phy_cores - Number of worker threads to be used. Type: integer
+| | ... | - rxq - Number of Rx queues to be used. Type: integer
+| | ... | - acl_type - FIXME.
+| | ...
+| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | ${framesize}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | Add PCI devices to all DUTs
+| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
+| | ... | ${s_limit} | ${framesize} | overhead=${overhead}
+| | And Apply startup configuration on all VPP DUTs
+| | &{vxlan1} = | Create Dictionary | vni=24 | vtep=172.17.0.2
+| | &{vxlan2} = | Create Dictionary | vni=24 | vtep=172.27.0.2
+| | @{dut1_vxlans} = | Create List | ${vxlan1}
+| | @{dut2_vxlans} = | Create List | ${vxlan2}
+| | Set interfaces in path in 3-node circular topology up
+| | Configure vhost interfaces for L2BD forwarding | ${dut1}
+| | ... | ${sock1} | ${sock2}
+| | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology
+| | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2
+| | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16
+| | @{permit_list} = | Create List | 10.0.0.1/32 | 10.0.0.2/32
+| | Run Keyword If | '${acl_type}' != '${EMPTY}'
+| | ... | Configure ACLs on a single interface | ${dut1} | ${dut1_if2} | input
+| | ... | ${acl_type} | @{permit_list}
+| | ${vm1} = | And Configure guest VM with dpdk-testpmd connected via vhost-user
+| | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM1
+| | ... | jumbo_frames=${jumbo}
+| | Set Test Variable | &{dut1_vm_refs} | DUT1_VM1=${vm1}
+| | Then Find NDR and PDR intervals using optimized search
+| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate}
+
+*** Test Cases ***
+| tc01-114B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 114B | 1C
+| | framesize=${114} | phy_cores=${1}
+
+| tc02-114B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 114B | 2C
+| | framesize=${114} | phy_cores=${2}
+
+| tc03-114B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 114B | 4C
+| | framesize=${114} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | framesize=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | framesize=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | framesize=${1518} | phy_cores=${4}
+
+| tc07-9000B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 9000B | 1C
+| | framesize=${9000} | phy_cores=${1}
+
+| tc08-9000B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 9000B | 2C
+| | framesize=${9000} | phy_cores=${2}
+
+| tc09-9000B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 9000B | 4C
+| | framesize=${9000} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | framesize=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | framesize=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | framesize=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr.robot
new file mode 100644
index 0000000000..ff476a49aa
--- /dev/null
+++ b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr.robot
@@ -0,0 +1,163 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Library | resources.libraries.python.QemuUtils
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
+| ... | VHOST | VM | VHOST_1024 | VTS | ACL_PERMIT_REFLECT
+| ...
+| Suite Setup | Run Keywords
+| ... | Set up 3-node performance topology with DUT's NIC model
+| ... | L3 | Intel-X520-DA2
+| ... | AND | Set up performance test suite with ACL
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| Test Teardown | Tear down mrr test with vhost and VM with dpdk-testpmd and ACL
+| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *Raw results L2BD test cases with VXLANoIPv4 and vhost*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
+| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-
+| ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via
+| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting
+| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M
+| ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores
+| ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to
+| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520
+| ... | Niantic by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
+| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+
+*** Variables ***
+| ${perf_qemu_qsz}= | 1024
+# X520-DA2 bandwidth limit
+| ${s_limit}= | ${10000000000}
+| ${overhead}= | ${50}
+# Socket names
+| ${dut1_bd_id1}= | 1
+| ${dut1_bd_id2}= | 2
+| ${dut2_bd_id1}= | 1
+| ${sock1}= | /tmp/sock-1-${dut1_bd_id1}
+| ${sock2}= | /tmp/sock-1-${dut1_bd_id2}
+# Traffic profile:
+| ${traffic_profile} | trex-sl-ethip4-vxlansrc253
+
+| ${acl_type}= | permit+reflect
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | ... | *Arguments:*
+| | ... | - framesize - L2 Frame Size [B]. Type: integer
+| | ... | - phy_cores - Number of worker threads to be used. Type: integer
+| | ... | - rxq - Number of Rx queues to be used. Type: integer
+| | ... | - acl_type - FIXME.
+| | ...
+| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | Add PCI devices to all DUTs
+| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
+| | ... | ${s_limit} | ${framesize} | overhead=${overhead}
+| | And Apply startup configuration on all VPP DUTs
+| | &{vxlan1} = | Create Dictionary | vni=24 | vtep=172.17.0.2
+| | &{vxlan2} = | Create Dictionary | vni=24 | vtep=172.27.0.2
+| | @{dut1_vxlans} = | Create List | ${vxlan1}
+| | @{dut2_vxlans} = | Create List | ${vxlan2}
+| | Set interfaces in path in 3-node circular topology up
+| | Configure vhost interfaces for L2BD forwarding | ${dut1}
+| | ... | ${sock1} | ${sock2}
+| | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology
+| | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2
+| | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16
+| | @{permit_list} = | Create List | 10.0.0.1/32 | 10.0.0.2/32
+| | Run Keyword If | '${acl_type}' != '${EMPTY}'
+| | ... | Configure ACLs on a single interface | ${dut1} | ${dut1_if2} | input
+| | ... | ${acl_type} | @{permit_list}
+| | ${vm1} = | And Configure guest VM with dpdk-testpmd connected via vhost-user
+| | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM1
+| | ... | jumbo_frames=${jumbo}
+| | Set Test Variable | &{dut1_vm_refs} | DUT1_VM1=${vm1}
+| | Then Traffic should pass with maximum rate
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-114B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr
+| | [Tags] | 114B | 1C
+| | framesize=${114} | phy_cores=${1}
+
+| tc02-114B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr
+| | [Tags] | 114B | 2C
+| | framesize=${114} | phy_cores=${2}
+
+| tc03-114B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr
+| | [Tags] | 114B | 4C
+| | framesize=${114} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr
+| | [Tags] | 1518B | 1C
+| | framesize=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr
+| | [Tags] | 1518B | 2C
+| | framesize=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr
+| | [Tags] | 1518B | 4C
+| | framesize=${1518} | phy_cores=${4}
+
+| tc07-9000B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr
+| | [Tags] | 9000B | 1C
+| | framesize=${9000} | phy_cores=${1}
+
+| tc08-9000B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr
+| | [Tags] | 9000B | 2C
+| | framesize=${9000} | phy_cores=${2}
+
+| tc09-9000B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr
+| | [Tags] | 9000B | 4C
+| | framesize=${9000} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr
+| | [Tags] | IMIX | 1C
+| | framesize=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr
+| | [Tags] | IMIX | 2C
+| | framesize=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr
+| | [Tags] | IMIX | 4C
+| | framesize=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot
new file mode 100644
index 0000000000..69b6691e47
--- /dev/null
+++ b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot
@@ -0,0 +1,170 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Library | resources.libraries.python.QemuUtils
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
+| ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
+| ... | VHOST | VM | VHOST_1024 | VTS | ACL_PERMIT_REFLECT
+| ...
+| Suite Setup | Run Keywords
+| ... | Set up 3-node performance topology with DUT's NIC model
+| ... | L3 | Intel-X520-DA2
+| ... | AND | Set up performance test suite with ACL
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| Test Teardown | Tear down performance test with vhost and VM with dpdk-testpmd and ACL
+| ... | ${min_rate}pps | ${framesize} | ${traffic_profile}
+| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *RFC2544: Packet throughput L2BD test cases with VXLANoIPv4
+| ... | and vhost*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
+| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-
+| ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via
+| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting
+| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M
+| ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores
+| ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to
+| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520
+| ... | Niantic by Intel.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
+| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
+| ... | of packets transmitted. NDR and PDR are discovered for different
+| ... | Ethernet L2 frame sizes using MLRsearch library.
+| ... | Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
+| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+
+*** Variables ***
+| ${perf_qemu_qsz}= | 1024
+# X520-DA2 bandwidth limit
+| ${s_limit}= | ${10000000000}
+| ${overhead}= | ${50}
+# Socket names
+| ${dut1_bd_id1}= | 1
+| ${dut1_bd_id2}= | 2
+| ${dut2_bd_id1}= | 1
+| ${sock1}= | /tmp/sock-1-${dut1_bd_id1}
+| ${sock2}= | /tmp/sock-1-${dut1_bd_id2}
+# Traffic profile:
+| ${traffic_profile} | trex-sl-ethip4-vxlansrc253
+| ${min_rate}= | ${10000}
+
+| ${acl_type}= | permit+reflect
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.
+| | ...
+| | ... | *Arguments:*
+| | ... | - framesize - L2 Frame Size [B]. Type: integer
+| | ... | - phy_cores - Number of worker threads to be used. Type: integer
+| | ... | - rxq - Number of Rx queues to be used. Type: integer
+| | ... | - acl_type - FIXME.
+| | ...
+| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | ${framesize}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | Add PCI devices to all DUTs
+| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
+| | ... | ${s_limit} | ${framesize} | overhead=${overhead}
+| | And Apply startup configuration on all VPP DUTs
+| | &{vxlan1} = | Create Dictionary | vni=24 | vtep=172.17.0.2
+| | &{vxlan2} = | Create Dictionary | vni=24 | vtep=172.27.0.2
+| | @{dut1_vxlans} = | Create List | ${vxlan1}
+| | @{dut2_vxlans} = | Create List | ${vxlan2}
+| | Set interfaces in path in 3-node circular topology up
+| | Configure vhost interfaces for L2BD forwarding | ${dut1}
+| | ... | ${sock1} | ${sock2}
+| | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology
+| | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2
+| | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16
+| | @{permit_list} = | Create List | 10.0.0.1/32 | 10.0.0.2/32
+| | Run Keyword If | '${acl_type}' != '${EMPTY}'
+| | ... | Configure ACLs on a single interface | ${dut1} | ${dut1_if2} | input
+| | ... | ${acl_type} | @{permit_list}
+| | ${vm1} = | And Configure guest VM with dpdk-testpmd connected via vhost-user
+| | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM1
+| | ... | jumbo_frames=${jumbo}
+| | Set Test Variable | &{dut1_vm_refs} | DUT1_VM1=${vm1}
+| | Then Find NDR and PDR intervals using optimized search
+| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate}
+
+*** Test Cases ***
+| tc01-114B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 114B | 1C
+| | framesize=${114} | phy_cores=${1}
+
+| tc02-114B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 114B | 2C
+| | framesize=${114} | phy_cores=${2}
+
+| tc03-114B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 114B | 4C
+| | framesize=${114} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | framesize=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | framesize=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | framesize=${1518} | phy_cores=${4}
+
+| tc07-9000B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 9000B | 1C
+| | framesize=${9000} | phy_cores=${1}
+
+| tc08-9000B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 9000B | 2C
+| | framesize=${9000} | phy_cores=${2}
+
+| tc09-9000B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 9000B | 4C
+| | framesize=${9000} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | framesize=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | framesize=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | framesize=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr.robot
new file mode 100644
index 0000000000..4f055cbbf5
--- /dev/null
+++ b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr.robot
@@ -0,0 +1,163 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Library | resources.libraries.python.QemuUtils
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
+| ... | VHOST | VM | VHOST_1024 | VTS
+| ...
+| Suite Setup | Run Keywords
+| ... | Set up 3-node performance topology with DUT's NIC model
+| ... | L3 | Intel-X520-DA2
+| ... | AND | Set up performance test suite with ACL
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| Test Teardown | Tear down mrr test with vhost and VM with dpdk-testpmd and ACL
+| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *Raw results L2BD test cases with VXLANoIPv4 and vhost*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
+| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-
+| ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via
+| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting
+| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M
+| ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores
+| ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to
+| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520
+| ... | Niantic by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
+| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+
+*** Variables ***
+| ${perf_qemu_qsz}= | 1024
+# X520-DA2 bandwidth limit
+| ${s_limit}= | ${10000000000}
+| ${overhead}= | ${50}
+# Socket names
+| ${dut1_bd_id1}= | 1
+| ${dut1_bd_id2}= | 2
+| ${dut2_bd_id1}= | 1
+| ${sock1}= | /tmp/sock-1-${dut1_bd_id1}
+| ${sock2}= | /tmp/sock-1-${dut1_bd_id2}
+# Traffic profile:
+| ${traffic_profile} | trex-sl-ethip4-vxlansrc253
+
+| ${acl_type}= | ${EMPTY}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | ... | *Arguments:*
+| | ... | - framesize - L2 Frame Size [B]. Type: integer
+| | ... | - phy_cores - Number of worker threads to be used. Type: integer
+| | ... | - rxq - Number of Rx queues to be used. Type: integer
+| | ... | - acl_type - FIXME.
+| | ...
+| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | Add PCI devices to all DUTs
+| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
+| | ... | ${s_limit} | ${framesize} | overhead=${overhead}
+| | And Apply startup configuration on all VPP DUTs
+| | &{vxlan1} = | Create Dictionary | vni=24 | vtep=172.17.0.2
+| | &{vxlan2} = | Create Dictionary | vni=24 | vtep=172.27.0.2
+| | @{dut1_vxlans} = | Create List | ${vxlan1}
+| | @{dut2_vxlans} = | Create List | ${vxlan2}
+| | Set interfaces in path in 3-node circular topology up
+| | Configure vhost interfaces for L2BD forwarding | ${dut1}
+| | ... | ${sock1} | ${sock2}
+| | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology
+| | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2
+| | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16
+| | @{permit_list} = | Create List | 10.0.0.1/32 | 10.0.0.2/32
+| | Run Keyword If | '${acl_type}' != '${EMPTY}'
+| | ... | Configure ACLs on a single interface | ${dut1} | ${dut1_if2} | input
+| | ... | ${acl_type} | @{permit_list}
+| | ${vm1} = | And Configure guest VM with dpdk-testpmd connected via vhost-user
+| | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM1
+| | ... | jumbo_frames=${jumbo}
+| | Set Test Variable | &{dut1_vm_refs} | DUT1_VM1=${vm1}
+| | Then Traffic should pass with maximum rate
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-114B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr
+| | [Tags] | 114B | 1C
+| | framesize=${114} | phy_cores=${1}
+
+| tc02-114B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr
+| | [Tags] | 114B | 2C
+| | framesize=${114} | phy_cores=${2}
+
+| tc03-114B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr
+| | [Tags] | 114B | 4C
+| | framesize=${114} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr
+| | [Tags] | 1518B | 1C
+| | framesize=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr
+| | [Tags] | 1518B | 2C
+| | framesize=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr
+| | [Tags] | 1518B | 4C
+| | framesize=${1518} | phy_cores=${4}
+
+| tc07-9000B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr
+| | [Tags] | 9000B | 1C
+| | framesize=${9000} | phy_cores=${1}
+
+| tc08-9000B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr
+| | [Tags] | 9000B | 2C
+| | framesize=${9000} | phy_cores=${2}
+
+| tc09-9000B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr
+| | [Tags] | 9000B | 4C
+| | framesize=${9000} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr
+| | [Tags] | IMIX | 1C
+| | framesize=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr
+| | [Tags] | IMIX | 2C
+| | framesize=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr
+| | [Tags] | IMIX | 4C
+| | framesize=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot
new file mode 100644
index 0000000000..e24218a4f1
--- /dev/null
+++ b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot
@@ -0,0 +1,170 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Library | resources.libraries.python.QemuUtils
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
+| ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
+| ... | VHOST | VM | VHOST_1024 | VTS
+| ...
+| Suite Setup | Run Keywords
+| ... | Set up 3-node performance topology with DUT's NIC model
+| ... | L3 | Intel-X520-DA2
+| ... | AND | Set up performance test suite with ACL
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| Test Teardown | Tear down performance test with vhost and VM with dpdk-testpmd and ACL
+| ... | ${min_rate}pps | ${framesize} | ${traffic_profile}
+| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *RFC2544: Packet throughput L2BD test cases with VXLANoIPv4
+| ... | and vhost*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
+| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-
+| ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via
+| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting
+| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M
+| ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores
+| ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to
+| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520
+| ... | Niantic by Intel.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
+| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
+| ... | of packets transmitted. NDR and PDR are discovered for different
+| ... | Ethernet L2 frame sizes using MLRsearch library.
+| ... | Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
+| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+
+*** Variables ***
+| ${perf_qemu_qsz}= | 1024
+# X520-DA2 bandwidth limit
+| ${s_limit}= | ${10000000000}
+| ${overhead}= | ${50}
+# Socket names
+| ${dut1_bd_id1}= | 1
+| ${dut1_bd_id2}= | 2
+| ${dut2_bd_id1}= | 1
+| ${sock1}= | /tmp/sock-1-${dut1_bd_id1}
+| ${sock2}= | /tmp/sock-1-${dut1_bd_id2}
+# Traffic profile:
+| ${traffic_profile} | trex-sl-ethip4-vxlansrc253
+| ${min_rate}= | ${10000}
+
+| ${acl_type}= | ${EMPTY}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.
+| | ...
+| | ... | *Arguments:*
+| | ... | - framesize - L2 Frame Size [B]. Type: integer
+| | ... | - phy_cores - Number of worker threads to be used. Type: integer
+| | ... | - rxq - Number of Rx queues to be used. Type: integer
+| | ... | - acl_type - FIXME.
+| | ...
+| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | ${framesize}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | Add PCI devices to all DUTs
+| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
+| | ... | ${s_limit} | ${framesize} | overhead=${overhead}
+| | And Apply startup configuration on all VPP DUTs
+| | &{vxlan1} = | Create Dictionary | vni=24 | vtep=172.17.0.2
+| | &{vxlan2} = | Create Dictionary | vni=24 | vtep=172.27.0.2
+| | @{dut1_vxlans} = | Create List | ${vxlan1}
+| | @{dut2_vxlans} = | Create List | ${vxlan2}
+| | Set interfaces in path in 3-node circular topology up
+| | Configure vhost interfaces for L2BD forwarding | ${dut1}
+| | ... | ${sock1} | ${sock2}
+| | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology
+| | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2
+| | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16
+| | @{permit_list} = | Create List | 10.0.0.1/32 | 10.0.0.2/32
+| | Run Keyword If | '${acl_type}' != '${EMPTY}'
+| | ... | Configure ACLs on a single interface | ${dut1} | ${dut1_if2} | input
+| | ... | ${acl_type} | @{permit_list}
+| | ${vm1} = | And Configure guest VM with dpdk-testpmd connected via vhost-user
+| | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM1
+| | ... | jumbo_frames=${jumbo}
+| | Set Test Variable | &{dut1_vm_refs} | DUT1_VM1=${vm1}
+| | Then Find NDR and PDR intervals using optimized search
+| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate}
+
+*** Test Cases ***
+| tc01-114B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 114B | 1C
+| | framesize=${114} | phy_cores=${1}
+
+| tc02-114B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 114B | 2C
+| | framesize=${114} | phy_cores=${2}
+
+| tc03-114B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 114B | 4C
+| | framesize=${114} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | framesize=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | framesize=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | framesize=${1518} | phy_cores=${4}
+
+| tc07-9000B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 9000B | 1C
+| | framesize=${9000} | phy_cores=${1}
+
+| tc08-9000B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 9000B | 2C
+| | framesize=${9000} | phy_cores=${2}
+
+| tc09-9000B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | 9000B | 4C
+| | framesize=${9000} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | framesize=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | framesize=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | framesize=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/vts/regenerate_testcases.py b/tests/vpp/perf/vts/regenerate_testcases.py
new file mode 100755
index 0000000000..adfde89b5c
--- /dev/null
+++ b/tests/vpp/perf/vts/regenerate_testcases.py
@@ -0,0 +1,18 @@
+#!/usr/bin/env python
+
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+from resources.libraries.python.autogen.Regenerator import Regenerator
+
+Regenerator().regenerate_glob("*.robot", protocol="vxlan+ip4")