CSIT-1521 Convert NestedVM testcase into KernelVM

Change-Id: Ic493253dc29dad4fc7e6541e4b839ca5898a6a40 Signed-off-by: Peter Mikus <pmikus@cisco.com>
author: Peter Mikus <pmikus@cisco.com> 2019-06-06 12:16:12 +0000
committer: Peter Mikus <pmikus@cisco.com> 2019-06-09 05:42:14 +0000
commit: 233eeb3e9c9fb8d3c300d745fab8112a19d981db (patch)
tree: f771db4a828ab45ec2843c8bd7fa199e902724fe /tests/vpp/perf/vts
parent: 80e06faea73f1574cdb932c25211162121fabd26 (diff)
3 files changed, 39 insertions, 72 deletions
diff --git a/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot
index b5119e08fc..27ef3203dc 100644
--- a/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot
@@ -25,8 +25,7 @@
 | Suite Teardown | Tear down 3-node performance topology
 | ...
 | Test Setup | Set up performance test
-| Test Teardown | Tear down performance test with vhost and VM with dpdk-testpmd and ACL
-| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
+| Test Teardown | Tear down performance test with vhost
 | ...
 | Test Template | Local Template
 | ...
@@ -38,12 +37,10 @@
 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
 | ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-
-| ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via
-| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting
-| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M
-| ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores
-| ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to
-| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with ${nic_name}.\
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running VPP l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
+| ... | tested with ${nic_name}.
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
@@ -60,18 +57,16 @@
 *** Variables ***
 | ${nic_name}= | Intel-X710
 | ${overhead}= | ${50}
-# Socket names
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${1}
 | ${dut1_bd_id1}= | 1
 | ${dut1_bd_id2}= | 2
 | ${dut2_bd_id1}= | 1
-| ${sock1}= | /var/run/vpp/sock-1-${dut1_bd_id1}
-| ${sock2}= | /var/run/vpp/sock-1-${dut1_bd_id2}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-ethip4-vxlansrc253
 | ${acl_type}= | permit
-# Defaults for teardown:
-| ${dut1}= | ${None}
-| ${dut1_vm_refs}= | ${None}
 
 *** Keywords ***
 | Local Template
@@ -99,8 +94,6 @@
 | | @{dut1_vxlans} = | Create List | ${vxlan1}
 | | @{dut2_vxlans} = | Create List | ${vxlan2}
 | | Set interfaces in path up
-| | Configure vhost interfaces for L2BD forwarding | ${dut1}
-| | ... | ${sock1} | ${sock2}
 | | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology
 | | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2
 | | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16
@@ -108,13 +101,10 @@
 | | Run Keyword If | '${acl_type}' != '${EMPTY}'
 | | ... | Configure ACLs on a single interface | ${dut1} | ${dut1_if2} | input
 | | ... | ${acl_type} | @{permit_list}
-| | ${nf_cpus}= | Get Affinity NF | ${nodes} | DUT1 | nf_chains=${1}
-| | | ... | nf_nodes=${1} | nf_chain=${1} | nf_node=${1}
-| | | ... | vs_dtc=${cpu_count_int} | nf_dtc=${cpu_count_int}
-| | ${vm1} = | And Configure guest VM with dpdk-testpmd connected via vhost-user
-| | ... | DUT1 | ${sock1} | ${sock2} | ${TEST NAME}DUT1_VM1 | ${nf_cpus}
-| | ... | jumbo=${jumbo} | perf_qemu_qsz=${1024} | use_tuned_cfs=${False}
-| | Set Test Variable | &{dut1_vm_refs} | ${TEST NAME}DUT1_VM1=${vm1}
+| | And Configure chains of NFs connected via vhost-user on single node
+| | ... | node=DUT1 | nf_chains=${nf_chains} | nf_nodes=${nf_nodes}
+| | ... | jumbo=${jumbo} | use_tuned_cfs=${False} | auto_scale=${True}
+| | ... | vnf=vpp_chain_l2xc
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
diff --git a/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot
index 0345ceec3c..8e30354eb3 100644
--- a/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot
@@ -25,8 +25,7 @@
 | Suite Teardown | Tear down 3-node performance topology
 | ...
 | Test Setup | Set up performance test
-| Test Teardown | Tear down performance test with vhost and VM with dpdk-testpmd and ACL
-| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
+| Test Teardown | Tear down performance test with vhost
 | ...
 | Test Template | Local Template
 | ...
@@ -38,12 +37,10 @@
 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
 | ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-
-| ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via
-| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting
-| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M
-| ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores
-| ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to
-| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with ${nic_name}.\
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running VPP l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
+| ... | tested with ${nic_name}.
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
@@ -60,18 +57,16 @@
 *** Variables ***
 | ${nic_name}= | Intel-X710
 | ${overhead}= | ${50}
-# Socket names
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${1}
 | ${dut1_bd_id1}= | 1
 | ${dut1_bd_id2}= | 2
 | ${dut2_bd_id1}= | 1
-| ${sock1}= | /var/run/vpp/sock-1-${dut1_bd_id1}
-| ${sock2}= | /var/run/vpp/sock-1-${dut1_bd_id2}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-ethip4-vxlansrc253
 | ${acl_type}= | permit+reflect
-# Defaults for teardown:
-| ${dut1}= | ${None}
-| ${dut1_vm_refs}= | ${None}
 
 *** Keywords ***
 | Local Template
@@ -99,22 +94,14 @@
 | | @{dut1_vxlans} = | Create List | ${vxlan1}
 | | @{dut2_vxlans} = | Create List | ${vxlan2}
 | | Set interfaces in path up
-| | Configure vhost interfaces for L2BD forwarding | ${dut1}
-| | ... | ${sock1} | ${sock2}
 | | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology
 | | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2
 | | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16
 | | @{permit_list} = | Create List | 10.0.0.1/32 | 10.0.0.2/32
-| | Run Keyword If | '${acl_type}' != '${EMPTY}'
-| | ... | Configure ACLs on a single interface | ${dut1} | ${dut1_if2} | input
-| | ... | ${acl_type} | @{permit_list}
-| | ${nf_cpus}= | Get Affinity NF | ${nodes} | DUT1 | nf_chains=${1}
-| | | ... | nf_nodes=${1} | nf_chain=${1} | nf_node=${1}
-| | | ... | vs_dtc=${cpu_count_int} | nf_dtc=${cpu_count_int}
-| | ${vm1} = | And Configure guest VM with dpdk-testpmd connected via vhost-user
-| | ... | DUT1 | ${sock1} | ${sock2} | ${TEST NAME}DUT1_VM1 | ${nf_cpus}
-| | ... | jumbo=${jumbo} | perf_qemu_qsz=${1024} | use_tuned_cfs=${False}
-| | Set Test Variable | &{dut1_vm_refs} | ${TEST NAME}DUT1_VM1=${vm1}
+| | And Configure chains of NFs connected via vhost-user on single node
+| | ... | node=DUT1 | nf_chains=${nf_chains} | nf_nodes=${nf_nodes}
+| | ... | jumbo=${jumbo} | use_tuned_cfs=${False} | auto_scale=${True}
+| | ... | vnf=vpp_chain_l2xc
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
diff --git a/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot
index 3b7bd8f921..4e5d4df008 100644
--- a/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot
@@ -25,8 +25,7 @@
 | Suite Teardown | Tear down 3-node performance topology
 | ...
 | Test Setup | Set up performance test
-| Test Teardown | Tear down performance test with vhost and VM with dpdk-testpmd and ACL
-| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
+| Test Teardown | Tear down performance test with vhost
 | ...
 | Test Template | Local Template
 | ...
@@ -38,12 +37,10 @@
 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
 | ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-
-| ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via
-| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting
-| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M
-| ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores
-| ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to
-| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with ${nic_name}.\
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running VPP l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
+| ... | tested with ${nic_name}.
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
@@ -60,18 +57,16 @@
 *** Variables ***
 | ${nic_name}= | Intel-X710
 | ${overhead}= | ${50}
-# Socket names
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${1}
 | ${dut1_bd_id1}= | 1
 | ${dut1_bd_id2}= | 2
 | ${dut2_bd_id1}= | 1
-| ${sock1}= | /var/run/vpp/sock-1-${dut1_bd_id1}
-| ${sock2}= | /var/run/vpp/sock-1-${dut1_bd_id2}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-ethip4-vxlansrc253
 | ${acl_type}= | ${EMPTY}
-# Defaults for teardown:
-| ${dut1}= | ${None}
-| ${dut1_vm_refs}= | ${None}
 
 *** Keywords ***
 | Local Template
@@ -99,8 +94,6 @@
 | | @{dut1_vxlans} = | Create List | ${vxlan1}
 | | @{dut2_vxlans} = | Create List | ${vxlan2}
 | | Set interfaces in path up
-| | Configure vhost interfaces for L2BD forwarding | ${dut1}
-| | ... | ${sock1} | ${sock2}
 | | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology
 | | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2
 | | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16
@@ -108,13 +101,10 @@
 | | Run Keyword If | '${acl_type}' != '${EMPTY}'
 | | ... | Configure ACLs on a single interface | ${dut1} | ${dut1_if2} | input
 | | ... | ${acl_type} | @{permit_list}
-| | ${nf_cpus}= | Get Affinity NF | ${nodes} | DUT1 | nf_chains=${1}
-| | | ... | nf_nodes=${1} | nf_chain=${1} | nf_node=${1}
-| | | ... | vs_dtc=${cpu_count_int} | nf_dtc=${cpu_count_int}
-| | ${vm1} = | And Configure guest VM with dpdk-testpmd connected via vhost-user
-| | ... | DUT1 | ${sock1} | ${sock2} | ${TEST NAME}DUT1_VM1 | ${nf_cpus}
-| | ... | jumbo=${jumbo} | perf_qemu_qsz=${1024} | use_tuned_cfs=${False}
-| | Set Test Variable | &{dut1_vm_refs} | ${TEST NAME}DUT1_VM1=${vm1}
+| | And Configure chains of NFs connected via vhost-user on single node
+| | ... | node=DUT1 | nf_chains=${nf_chains} | nf_nodes=${nf_nodes}
+| | ... | jumbo=${jumbo} | use_tuned_cfs=${False} | auto_scale=${True}
+| | ... | vnf=vpp_chain_l2xc
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
author	Peter Mikus <pmikus@cisco.com>	2019-06-06 12:16:12 +0000
committer	Peter Mikus <pmikus@cisco.com>	2019-06-09 05:42:14 +0000
commit	233eeb3e9c9fb8d3c300d745fab8112a19d981db (patch)
tree	f771db4a828ab45ec2843c8bd7fa199e902724fe /tests/vpp/perf/vts
parent	80e06faea73f1574cdb932c25211162121fabd26 (diff)