VPP-DEV API Coverages: SRv6

Jira: CSIT-1698

Change-Id: I6d9154284990df8877850e4014716510016e485b
Signed-off-by: Jan Gelety <jgelety@cisco.com>

6 files changed, 13 insertions, 15 deletions

diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot
index d2790c264b..20316a75fe 100644
--- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot
+++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot
@@ -36,8 +36,8 @@
 | ... | TG-DUTn for IPv6 routing over SRv6.
 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
 | ... | routing and static route, SR policy and steering policy for one\
-| ... | direction and one SR behaviour (function) - End - for other direction.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
+| ... | direction and one SR behaviour (function) - End.DX6 - for other\
+| ... | direction. DUT1 and DUT2 are tested with ${nic_name}.\
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
@@ -107,7 +107,7 @@
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
-| | And Initialize IPv6 forwarding over SRv6 with encapsulation with '1' x SID 'with' decapsulation in 3-node circular topology
+| | And Initialize SRv6 encapsulation with '1' x SID 'with' decapsulation
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot
index a37ffa6170..184a3c9e7b 100644
--- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot
+++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot
@@ -90,7 +90,8 @@
 | | [Documentation]
 | | ... | [Cfg] DUT1 and DUT2 are configured with IPv6\
 | | ... | routing and static route, SR policy and steering policy for one\
-| | ... | direction and one SR behaviour (function) - End - for other direction.
+| | ... | direction and two SR behaviours (functions) - End and End.DX6 - for\
+| | ... | other direction.
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
 | |
@@ -110,7 +111,7 @@
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
-| | And Initialize IPv6 forwarding over SRv6 with encapsulation with '2' x SID 'with' decapsulation in 3-node circular topology
+| | And Initialize SRv6 encapsulation with '2' x SID 'with' decapsulation
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot
index e260bf2789..6b8cfcc0d6 100644
--- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot
+++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot
@@ -110,7 +110,7 @@
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
-| | And Initialize IPv6 forwarding over SRv6 with encapsulation with '2' x SID 'without' decapsulation in 3-node circular topology
+| | And Initialize SRv6 encapsulation with '2' x SID 'without' decapsulation
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot
index c38d2bdfcc..b17bb6b8b5 100644
--- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot
+++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot
@@ -67,7 +67,6 @@
 | ${dut1_sid2}= | 2003:2::
 | ${dut1_bsid}= | 2002:1::1
 | ${dut2_sid1}= | 2002:2::
-| ${dut2_sid1}= | 2002:2::
 | ${dut2_sid2}= | 2003:1::
 | ${dut2_bsid}= | 2003:1::1
 | ${out_sid1_1}= | 2002:3::
@@ -102,7 +101,7 @@
 | | [Documentation]
 | | ... | [Cfg] DUT1 and DUT2 are configured with IPv6\
 | | ... | routing and static route, SR policy and steering policy for one\
-| | ... | direction and one SR behaviour (function) - End - for other direction.
+| | ... | direction and SR behaviour (function) - End.AD - for other direction.
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
 | |
@@ -123,7 +122,7 @@
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Start containers for test | nf_chains=${1} | nf_nodes=${1}
-| | And Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via 'dynamic_proxy' behaviour in 3-node circular topology
+| | And Initialize SRv6 with 'dynamic_proxy' SR-unaware Service Function
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot
index 097c2ea16d..6d0f6693f0 100644
--- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot
+++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot
@@ -67,7 +67,6 @@
 | ${dut1_sid2}= | 2003:2::
 | ${dut1_bsid}= | 2002:1::1
 | ${dut2_sid1}= | 2002:2::
-| ${dut2_sid1}= | 2002:2::
 | ${dut2_sid2}= | 2003:1::
 | ${dut2_bsid}= | 2003:1::1
 | ${out_sid1_1}= | 2002:3::
@@ -102,7 +101,7 @@
 | | [Documentation]
 | | ... | [Cfg] DUT1 and DUT2 are configured with IPv6\
 | | ... | routing and static route, SR policy and steering policy for one\
-| | ... | direction and one SR behaviour (function) - End - for other direction.
+| | ... | direction and SR behaviour (function) - End.AM - for other direction.
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
 | |
@@ -123,7 +122,7 @@
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Start containers for test | nf_chains=${1} | nf_nodes=${1}
-| | And Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via 'masquerading' behaviour in 3-node circular topology
+| | And Initialize SRv6 with 'masquerading' SR-unaware Service Function
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot
index 2198d0d958..e820365995 100644
--- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot
+++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot
@@ -67,7 +67,6 @@
 | ${dut1_sid2}= | 2003:2::
 | ${dut1_bsid}= | 2002:1::1
 | ${dut2_sid1}= | 2002:2::
-| ${dut2_sid1}= | 2002:2::
 | ${dut2_sid2}= | 2003:1::
 | ${dut2_bsid}= | 2003:1::1
 | ${out_sid1_1}= | 2002:3::
@@ -102,7 +101,7 @@
 | | [Documentation]
 | | ... | [Cfg] DUT1 and DUT2 are configured with IPv6\
 | | ... | routing and static route, SR policy and steering policy for one\
-| | ... | direction and one SR behaviour (function) - End - for other direction.
+| | ... | direction and SR behaviour (function) - End.AS - for other direction.
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
 | |
@@ -123,7 +122,7 @@
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Start containers for test | nf_chains=${1} | nf_nodes=${1}
-| | And Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via 'static_proxy' behaviour in 3-node circular topology
+| | And Initialize SRv6 with 'static_proxy' SR-unaware Service Function
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***