diff options
| author |   Peter Mikus <pmikus@cisco.com> | 2018-07-06 06:39:51 +0000 |
|---|---|---|
| committer | Peter Mikus <pmikus@cisco.com> | 2018-07-09 08:18:03 +0000 |
| commit | cc85afad85339d2cc8f035ce63ff21220d8e6b96 (patch) | |
| tree | 8c51cf79b31af4544467d6e5f06c91d077648d08 /tests/vpp/perf | |
| parent | 92995a7a564c17040483488cbc0da07e28386bdb (diff) | |
CSIT-1142 2-node topology - keywords
- Clean up of 2-node setup KWs
Change-Id: I59fc901fb57544eceb6a041b56b515cda8babf85
Signed-off-by: Peter Mikus <pmikus@cisco.com>
Diffstat (limited to 'tests/vpp/perf')
307 files changed, 842 insertions, 842 deletions
diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot index 1f1fbac0c3..56bf177edc 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot @@ -82,7 +82,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-mrr.robot index 708a4f1927..9377cbff5d 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-mrr.robot @@ -86,7 +86,7 @@ | | ${get_framesize}= | Get Frame Size | ${framesize}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
-| | And Add single PCI device to DUTs in 3-node single link topology
+| | And Add single PCI device to all DUTs
| | And Run Keyword If | ${get_framesize} < ${1522}
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot index c3454f8167..c2ac8e4839 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot @@ -97,7 +97,7 @@ | | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
-| | And Add single PCI device to DUTs in 3-node single link topology
+| | And Add single PCI device to all DUTs
| | And Run Keyword If | ${get_framesize} < ${1522}
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1dcr-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1dcr-mrr.robot index 60aaa2b68f..57faef7098 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1dcr-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1dcr-mrr.robot @@ -82,7 +82,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-mrr.robot index 4a9cd3cc46..4a2567107a 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-mrr.robot @@ -81,7 +81,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot index 46b34d1adf..328bdbd10d 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot @@ -82,7 +82,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-mrr.robot index c164f04db0..23b1136aa7 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-mrr.robot @@ -85,7 +85,7 @@ | | ${get_framesize}= | Get Frame Size | ${framesize}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
-| | And Add single PCI device to DUTs in 3-node single link topology
+| | And Add single PCI device to all DUTs
| | And Run Keyword If | ${get_framesize} < ${1522}
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot index bf52330ec5..5753844ef5 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot @@ -96,7 +96,7 @@ | | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
-| | And Add single PCI device to DUTs in 3-node single link topology
+| | And Add single PCI device to all DUTs
| | And Run Keyword If | ${get_framesize} < ${1522}
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-mrr.robot index 00eae8f9ec..d049eb43e8 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-mrr.robot @@ -82,7 +82,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot index 2799c3b40d..aad22a7660 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot @@ -81,7 +81,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot b/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot index cd32014d3d..5254753965 100644 --- a/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot +++ b/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot @@ -86,7 +86,7 @@ | | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot b/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot index 04d542f78e..2e02556435 100644 --- a/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot +++ b/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot @@ -85,7 +85,7 @@ | | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr.robot index b5ca9f6807..dc73146bf9 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr.robot @@ -86,7 +86,7 @@ | | ${auth_alg}= | Integ Alg AES GCM 128 | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${${wt}} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdrdisc.robot index 7661f92093..1038d12bb3 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdrdisc.robot @@ -97,7 +97,7 @@ | | ${auth_alg}= | Integ Alg AES GCM 128 | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${${wt}} | | And Add DPDK dev default RXD to all DUTs | 2048 diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr.robot index 7330873e43..1ab83404fa 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr.robot @@ -86,7 +86,7 @@ | | ${auth_alg}= | Integ Alg SHA1 96 | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${${wt}} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot index d903360957..ffca342edf 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot @@ -92,7 +92,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -127,7 +127,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -163,7 +163,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -197,7 +197,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -234,7 +234,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -270,7 +270,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -305,7 +305,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -340,7 +340,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} | | And Add DPDK dev default RXD to all DUTs | 2048 diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot index 3de6c7ffaa..ed3cfc1471 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot @@ -92,7 +92,7 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -132,7 +132,7 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -174,7 +174,7 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -214,7 +214,7 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -257,7 +257,7 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -299,7 +299,7 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -339,7 +339,7 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -379,7 +379,7 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} | | And Add DPDK dev default RXD to all DUTs | 2048 diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot index a776c78b76..8f1485d59f 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot @@ -92,7 +92,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -132,7 +132,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -173,7 +173,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -212,7 +212,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -254,7 +254,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -295,7 +295,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -335,7 +335,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -375,7 +375,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} | | And Add DPDK dev default RXD to all DUTs | 2048 diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr.robot index e4a91e8bde..b9f857be4e 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr.robot @@ -87,7 +87,7 @@ | | ${auth_alg}= | Integ Alg AES GCM 128 | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdrdisc.robot index 63c2a647a7..2579bc1e38 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdrdisc.robot @@ -98,7 +98,7 @@ | | ${auth_alg}= | Integ Alg AES GCM 128 | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology | | ... | aesni_gcm | ${${wt}} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr.robot index 61d06f314d..6fbdd93eb5 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr.robot @@ -87,7 +87,7 @@ | | ${auth_alg}= | Integ Alg SHA1 96 | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdrdisc.robot index c59c4cb44b..4fc25f47d8 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdrdisc.robot @@ -98,7 +98,7 @@ | | ${auth_alg}= | Integ Alg SHA1 96 | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology | | ... | aesni_mb | ${${wt}} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdrdisc.robot index dfcc338926..7bfadb3da0 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdrdisc.robot @@ -98,7 +98,7 @@ | | ${auth_alg}= | Integ Alg AES GCM 128 | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology | | ... | aesni_gcm | ${${wt}} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot index 4846d12334..116b7f35bc 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot @@ -98,7 +98,7 @@ | | ${auth_alg}= | Integ Alg SHA1 96 | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology | | ... | aesni_mb | ${${wt}} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr.robot index d4aebfecba..19d55bca92 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr.robot @@ -86,7 +86,7 @@ | | ${auth_alg}= | Integ Alg AES GCM 128 | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${${wt}} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdrdisc.robot index 00dc0f04c8..f42017ce77 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdrdisc.robot @@ -92,7 +92,7 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -127,7 +127,7 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -164,7 +164,7 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -199,7 +199,7 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -237,7 +237,7 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -274,7 +274,7 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -309,7 +309,7 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -344,7 +344,7 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} | | And Add DPDK dev default RXD to all DUTs | 2048 diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr.robot index 9fd316ecf2..55076dc261 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr.robot @@ -86,7 +86,7 @@ | | ${auth_alg}= | Integ Alg SHA1 96 | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${${wt}} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot index ff5bdab1ef..b459f40048 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot @@ -92,7 +92,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -127,7 +127,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -163,7 +163,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -197,7 +197,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -234,7 +234,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -270,7 +270,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -305,7 +305,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -340,7 +340,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} | | And Add DPDK dev default RXD to all DUTs | 2048 diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot index efedeb8f93..c631497bb5 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot @@ -92,7 +92,7 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -132,7 +132,7 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -174,7 +174,7 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -214,7 +214,7 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -257,7 +257,7 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -299,7 +299,7 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -339,7 +339,7 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -379,7 +379,7 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} | | And Add DPDK dev default RXD to all DUTs | 2048 diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot index 7e79e4f4a0..6d9e639f8a 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot @@ -92,7 +92,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -132,7 +132,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -173,7 +173,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -212,7 +212,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -254,7 +254,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -295,7 +295,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -335,7 +335,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -375,7 +375,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} | | And Add DPDK dev default RXD to all DUTs | 2048 diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot index 1f2f6f9c18..91b18faf6b 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot @@ -91,7 +91,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -123,7 +123,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -156,7 +156,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -187,7 +187,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -220,7 +220,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -252,7 +252,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -284,7 +284,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -316,7 +316,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -349,7 +349,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${4} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -381,7 +381,7 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${4} | | And Add DPDK dev default RXD to all DUTs | 2048 diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-mrr.robot index b53da6becf..7890e6773a 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-mrr.robot @@ -67,7 +67,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrpdrdisc.robot index 7f72008ab3..badefa5168 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrpdrdisc.robot @@ -74,7 +74,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-iacldstbase-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-iacldstbase-mrr.robot index 89cff60939..1726c79c25 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-iacldstbase-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-iacldstbase-mrr.robot @@ -66,7 +66,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrpdrdisc.robot index dab6a29cb6..bd1429f881 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrpdrdisc.robot @@ -73,7 +73,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-mrr.robot index b6222a5fa5..bb70cbf78c 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-mrr.robot @@ -75,7 +75,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrpdrdisc.robot index 51baa78143..887e1c4b32 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrpdrdisc.robot @@ -78,7 +78,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-mrr.robot index 7a1a6cdac8..f860cad016 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-mrr.robot @@ -64,7 +64,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrpdr.robot index 7e14c8afa9..0774a47502 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrpdr.robot @@ -72,7 +72,7 @@ | | ${max_uniditrectional_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ${max_rate}= | Evaluate | 2*${max_uniditrectional_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrpdrdisc.robot index 8c3d0925dc..91f94cffc1 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrpdrdisc.robot @@ -72,7 +72,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale200k-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale200k-mrr.robot index c9c60f71ad..d06ef5ff96 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale200k-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale200k-mrr.robot @@ -66,7 +66,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale200k-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale200k-ndrpdrdisc.robot index 2d070e59b5..bf059b6c4a 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale200k-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale200k-ndrpdrdisc.robot @@ -70,7 +70,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -92,7 +92,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -115,7 +115,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -137,7 +137,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -160,7 +160,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -181,7 +181,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -203,7 +203,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -225,7 +225,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -248,7 +248,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -270,7 +270,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -293,7 +293,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -314,7 +314,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -336,7 +336,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -358,7 +358,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -381,7 +381,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -403,7 +403,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -426,7 +426,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -447,7 +447,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale20k-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale20k-mrr.robot index 3baec768b4..08b417eaef 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale20k-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale20k-mrr.robot @@ -66,7 +66,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale20k-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale20k-ndrpdrdisc.robot index 1d01176243..a299c33e03 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale20k-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale20k-ndrpdrdisc.robot @@ -70,7 +70,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -92,7 +92,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -115,7 +115,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -137,7 +137,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -160,7 +160,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -181,7 +181,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -203,7 +203,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -225,7 +225,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -248,7 +248,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -270,7 +270,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -293,7 +293,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -314,7 +314,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -336,7 +336,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -358,7 +358,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -381,7 +381,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -403,7 +403,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -426,7 +426,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -447,7 +447,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale2m-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale2m-mrr.robot index b452bb05f8..a2420a7da5 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale2m-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale2m-mrr.robot @@ -66,7 +66,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale2m-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale2m-ndrpdrdisc.robot index 1d07bdbcd5..d8799cfeb2 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale2m-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale2m-ndrpdrdisc.robot @@ -70,7 +70,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -92,7 +92,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -115,7 +115,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -137,7 +137,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -160,7 +160,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -181,7 +181,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -203,7 +203,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -225,7 +225,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -248,7 +248,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -270,7 +270,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -293,7 +293,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -314,7 +314,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -336,7 +336,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -358,7 +358,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -381,7 +381,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -403,7 +403,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -426,7 +426,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -447,7 +447,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sf-100flows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sf-100flows-ndrpdrdisc.robot index 6cbae325eb..d7c506be0c 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sf-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sf-100flows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdrdisc.robot index d2d8459b35..5a375b8b79 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdrdisc.robot index 456fce9d68..75f45920bc 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sl-100flows-ndrpdrdisc.robot index b05009fbb9..acd98c8b66 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sl-100flows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdrdisc.robot index 7725b448a3..2c55be6638 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdrdisc.robot index c56afc0f8a..3221a0fc1b 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-100flows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-100flows-ndrpdrdisc.robot index 1638e48bb3..f955172406 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-100flows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdrdisc.robot index c5764ba5f8..0dbb8e4275 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-10kflows-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-10kflows-mrr.robot index 8342bd2163..7675c2e58e 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-10kflows-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-10kflows-mrr.robot @@ -83,7 +83,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdrdisc.robot index d877eb991a..43d0d10e99 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-100flows-ndrpdrdisc.robot index 93f09d6476..3f9ecd294f 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-100flows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdrdisc.robot index 44bd20c3ea..24481d985f 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-10kflows-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-10kflows-mrr.robot index 32f9fac4d2..fc39a6cb6f 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-10kflows-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-10kflows-mrr.robot @@ -83,7 +83,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdrdisc.robot index 21d3196215..554dfcb3ff 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdrdisc.robot @@ -81,7 +81,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-100flows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-100flows-ndrpdrdisc.robot index 8ef9a22592..013c0e4eec 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-100flows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdrdisc.robot index d6782305c2..dc0f304e50 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-10kflows-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-10kflows-mrr.robot index 937447e4ba..b010ed2977 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-10kflows-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-10kflows-mrr.robot @@ -83,7 +83,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdrdisc.robot index 4d1bbef011..c061e72412 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-100flows-ndrpdrdisc.robot index 90b219a367..b9fd28e4e0 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-100flows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdrdisc.robot index 339a8a4be8..c3a799855c 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot index 69a3c09567..d9ea85c8fa 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot @@ -83,7 +83,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdrdisc.robot index a3c8a65ef7..197e39daf9 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-nat44-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-nat44-mrr.robot index bcc1529930..1484a7c7ae 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-nat44-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-nat44-mrr.robot @@ -70,7 +70,7 @@ | | ${get_framesize}= | Get Frame Size | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Add NAT to all DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-nat44-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-nat44-ndrpdrdisc.robot index 5b8d241d7f..0377018dae 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-nat44-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-nat44-ndrpdrdisc.robot @@ -72,7 +72,7 @@ | | ${get_framesize}= | Get Frame Size | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Add NAT to all DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sf-100flows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sf-100flows-ndrpdrdisc.robot index e24b736db0..63e8274b6d 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sf-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sf-100flows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdrdisc.robot index e388f5b5bc..23ceae15d4 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdrdisc.robot index b72a7d1855..03c0a9e6c9 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sl-100flows-ndrpdrdisc.robot index bc064b7c36..fc96e8b4ce 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sl-100flows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdrdisc.robot index 2a084822fd..e05cd7a7a7 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdrdisc.robot index cef14d16f7..e8f609b101 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sf-100flows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sf-100flows-ndrpdrdisc.robot index 9037fef7da..78ccd92e82 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sf-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sf-100flows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdrdisc.robot index 2f589a5464..0bcae8cec2 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdrdisc.robot index 9a4afad085..2ed70dbf97 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sl-100flows-ndrpdrdisc.robot index 5214ad9b9c..1e813e161d 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sl-100flows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdrdisc.robot index 63e705efee..a6c4aca517 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdrdisc.robot index 5d7ebedb20..ade78d16d2 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sf-100flows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sf-100flows-ndrpdrdisc.robot index a632740420..ac0d2ce930 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sf-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sf-100flows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdrdisc.robot index eefb5aaabf..1a8b852751 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdrdisc.robot index bf67708e35..cfd7f85dac 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sl-100flows-ndrpdrdisc.robot index c3395ff789..9097fc6df7 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sl-100flows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdrdisc.robot index a70ad07a19..2b7829e116 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdrdisc.robot index 5d9645d2ba..e6344aa2b5 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdrdisc.robot index a3890f100b..c66da8d0b9 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdrdisc.robot @@ -72,7 +72,7 @@ | | ${get_framesize}= | Get Frame Size | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Add NAT to all DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdrdisc.robot index 593cffd5be..3503cdaf7f 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdrdisc.robot @@ -73,7 +73,7 @@ | | ${get_framesize}= | Get Frame Size | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Add NAT to all DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdrdisc.robot index 1ee724f455..6af6dd9e0d 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdrdisc.robot @@ -73,7 +73,7 @@ | | ${get_framesize}= | Get Frame Size | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Add NAT to all DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr.robot index 47d21d2b23..b711b1aa94 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr.robot @@ -70,7 +70,7 @@ | | ${get_framesize}= | Get Frame Size | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Add NAT to all DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdrdisc.robot index a730b4c3c6..87dc66d52c 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdrdisc.robot @@ -73,7 +73,7 @@ | | ${get_framesize}= | Get Frame Size | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Add NAT to all DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdrdisc.robot index 696c42c26c..47ea47e349 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdrdisc.robot @@ -73,7 +73,7 @@ | | ${get_framesize}= | Get Frame Size | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Add NAT to all DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdrdisc.robot index b1d1765e12..7851135852 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdrdisc.robot @@ -73,7 +73,7 @@ | | ${get_framesize}= | Get Frame Size | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Add NAT to all DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-mrr.robot index 91e9c0f6d1..74592d2b4a 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-mrr.robot @@ -67,7 +67,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-mrr.robot index 51fe45f960..bc2ca8d91f 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-mrr.robot @@ -66,7 +66,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-mrr.robot index b087096e32..6b16bc40c3 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-mrr.robot @@ -75,7 +75,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-mrr.robot index a5e5fb8413..8b49b7e884 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-mrr.robot @@ -64,7 +64,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-mrr.robot index 5932a83ccf..ee78d20684 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-mrr.robot @@ -66,7 +66,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-mrr.robot index d88bac58c5..26465d7a49 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-mrr.robot @@ -66,7 +66,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-mrr.robot index fd8bf4586e..5c838dbbaf 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-mrr.robot @@ -66,7 +66,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-mrr.robot index 122dcde140..59d9fef405 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-mrr.robot @@ -83,7 +83,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-mrr.robot index 580ae306b0..0e55942518 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-mrr.robot @@ -83,7 +83,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-mrr.robot index 11f02242e1..d81af3f316 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-mrr.robot @@ -83,7 +83,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot index 409d403dc1..8246ab8b52 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot @@ -83,7 +83,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-mrr.robot index 748de0fd53..695e004cb7 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-mrr.robot @@ -70,7 +70,7 @@ | | ${get_framesize}= | Get Frame Size | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Add NAT to all DUTs diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr.robot index a2c81947da..0cdc93244f 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr.robot @@ -70,7 +70,7 @@ | | ${get_framesize}= | Get Frame Size | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Add NAT to all DUTs diff --git a/tests/vpp/perf/ip4/40ge2p1xl710-ethip4-ip4base-mrr.robot b/tests/vpp/perf/ip4/40ge2p1xl710-ethip4-ip4base-mrr.robot index 8c779915f8..b7da262a88 100644 --- a/tests/vpp/perf/ip4/40ge2p1xl710-ethip4-ip4base-mrr.robot +++ b/tests/vpp/perf/ip4/40ge2p1xl710-ethip4-ip4base-mrr.robot @@ -68,7 +68,7 @@ | | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4/40ge2p1xl710-ethip4-ip4base-ndrpdrdisc.robot b/tests/vpp/perf/ip4/40ge2p1xl710-ethip4-ip4base-ndrpdrdisc.robot index a23a4ea9ad..84f9ee537d 100644 --- a/tests/vpp/perf/ip4/40ge2p1xl710-ethip4-ip4base-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/40ge2p1xl710-ethip4-ip4base-ndrpdrdisc.robot @@ -77,7 +77,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -100,7 +100,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -123,7 +123,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -146,7 +146,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -169,7 +169,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -192,7 +192,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -216,7 +216,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -240,7 +240,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -264,7 +264,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip4-ip4base-mrr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip4-ip4base-mrr.robot index d917e3926e..e5a0d289ac 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip4-ip4base-mrr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip4-ip4base-mrr.robot @@ -71,7 +71,7 @@ | | ... | ${get_framesize + ${lisp_overhead}} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize + ${lisp_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip4-ip4base-ndrpdrdisc.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip4-ip4base-ndrpdrdisc.robot index 1c197c19c7..5a8d17a82d 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip4-ip4base-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip4-ip4base-ndrpdrdisc.robot @@ -66,7 +66,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology @@ -96,7 +96,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology @@ -127,7 +127,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology @@ -157,7 +157,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology @@ -188,7 +188,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} @@ -217,7 +217,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} @@ -247,7 +247,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology @@ -277,7 +277,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology @@ -308,7 +308,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology @@ -338,7 +338,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology @@ -369,7 +369,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} @@ -398,7 +398,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} @@ -428,7 +428,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology @@ -458,7 +458,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology @@ -489,7 +489,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology @@ -519,7 +519,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology @@ -550,7 +550,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} @@ -579,7 +579,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip6-ip4base-ndrpdrdisc.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip6-ip4base-ndrpdrdisc.robot index 3f1dfb7d0a..0f05cfcc0d 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip6-ip4base-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip6-ip4base-ndrpdrdisc.robot @@ -67,7 +67,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology @@ -97,7 +97,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology @@ -128,7 +128,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology @@ -158,7 +158,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology @@ -189,7 +189,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6} @@ -218,7 +218,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6} @@ -248,7 +248,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology @@ -278,7 +278,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology @@ -309,7 +309,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology @@ -339,7 +339,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology @@ -370,7 +370,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6} @@ -399,7 +399,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6} @@ -429,7 +429,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology @@ -459,7 +459,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology @@ -490,7 +490,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology @@ -520,7 +520,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology @@ -551,7 +551,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6} @@ -580,7 +580,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6} diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-mrr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-mrr.robot index cce962f65c..7fc08fee1b 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-mrr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-mrr.robot @@ -68,7 +68,7 @@ | | ... | ${get_framesize + ${vxlan_overhead}} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize + ${vxlan_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-ndrpdrdisc.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-ndrpdrdisc.robot index 1701c19dd8..a3342d83db 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-ndrpdrdisc.robot @@ -73,7 +73,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -97,7 +97,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -122,7 +122,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -145,7 +145,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} @@ -169,7 +169,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -192,7 +192,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} @@ -216,7 +216,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -240,7 +240,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -265,7 +265,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -288,7 +288,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} @@ -312,7 +312,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -335,7 +335,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} @@ -359,7 +359,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -383,7 +383,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -408,7 +408,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -431,7 +431,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} @@ -455,7 +455,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -478,7 +478,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2xcbase-mrr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2xcbase-mrr.robot index 962c499f93..2f8e72634e 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2xcbase-mrr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2xcbase-mrr.robot @@ -68,7 +68,7 @@ | | ... | ${get_framesize + ${vxlan_overhead}} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize + ${vxlan_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2xcbase-ndrpdrdisc.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2xcbase-ndrpdrdisc.robot index 86dc77ed92..df4dd980ca 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2xcbase-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2xcbase-ndrpdrdisc.robot @@ -69,7 +69,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -90,7 +90,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -112,7 +112,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -132,7 +132,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} @@ -153,7 +153,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -173,7 +173,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} @@ -194,7 +194,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -215,7 +215,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -237,7 +237,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -257,7 +257,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} @@ -278,7 +278,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -298,7 +298,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} @@ -319,7 +319,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -340,7 +340,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -362,7 +362,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -382,7 +382,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} @@ -403,7 +403,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -423,7 +423,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-mrr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-mrr.robot index 47bae0ed03..e6fd36b31e 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-mrr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-mrr.robot @@ -71,7 +71,7 @@ | | ... | ${get_framesize + ${lisp_overhead}} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize + ${lisp_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-mrr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-mrr.robot index 3417e48403..7fd1d866d8 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-mrr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-mrr.robot @@ -68,7 +68,7 @@ | | ... | ${get_framesize + ${vxlan_overhead}} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize + ${vxlan_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-mrr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-mrr.robot index 982e7745ad..e5422d60a2 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-mrr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-mrr.robot @@ -68,7 +68,7 @@ | | ... | ${get_framesize + ${vxlan_overhead}} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize + ${vxlan_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-mrr.robot index ce2025b4cf..b0e4f1bdaa 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-mrr.robot @@ -67,7 +67,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrpdrdisc.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrpdrdisc.robot index edd30cb89f..a5e7e190ce 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrpdrdisc.robot @@ -71,7 +71,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology @@ -101,7 +101,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology @@ -132,7 +132,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology @@ -162,7 +162,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology @@ -193,7 +193,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology | | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} @@ -222,7 +222,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology | | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} @@ -252,7 +252,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology @@ -282,7 +282,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology @@ -313,7 +313,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology @@ -343,7 +343,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology @@ -374,7 +374,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology | | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} @@ -403,7 +403,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology | | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} @@ -433,7 +433,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology @@ -463,7 +463,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology @@ -494,7 +494,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology @@ -524,7 +524,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology @@ -555,7 +555,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology | | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} @@ -584,7 +584,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology | | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-iacldstbase-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-iacldstbase-mrr.robot index fe19a88f48..1ca41fc31d 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-iacldstbase-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-iacldstbase-mrr.robot @@ -65,7 +65,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-iacldstbase-ndrpdrdisc.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-iacldstbase-ndrpdrdisc.robot index 3f73fd7eeb..f6faaee08c 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-iacldstbase-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-iacldstbase-ndrpdrdisc.robot @@ -69,7 +69,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -92,7 +92,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -116,7 +116,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -139,7 +139,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -163,7 +163,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology | | And Initialize IPv6 iAcl whitelist in 3-node circular topology @@ -185,7 +185,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology | | And Initialize IPv6 iAcl whitelist in 3-node circular topology @@ -208,7 +208,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -231,7 +231,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -255,7 +255,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -278,7 +278,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -302,7 +302,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology | | And Initialize IPv6 iAcl whitelist in 3-node circular topology @@ -324,7 +324,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology | | And Initialize IPv6 iAcl whitelist in 3-node circular topology @@ -347,7 +347,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -370,7 +370,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -394,7 +394,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -417,7 +417,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -441,7 +441,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology | | And Initialize IPv6 iAcl whitelist in 3-node circular topology @@ -463,7 +463,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology | | And Initialize IPv6 iAcl whitelist in 3-node circular topology diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-mrr.robot index 9ab49fbeba..2b6acaade6 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-mrr.robot @@ -63,7 +63,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-ndrpdrdisc.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-ndrpdrdisc.robot index 02c5350d5e..98ba745a0c 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-ndrpdrdisc.robot @@ -67,7 +67,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -88,7 +88,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -110,7 +110,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -131,7 +131,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -153,7 +153,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -173,7 +173,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} @@ -194,7 +194,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -215,7 +215,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -237,7 +237,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -258,7 +258,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -280,7 +280,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -300,7 +300,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} @@ -321,7 +321,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -342,7 +342,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -364,7 +364,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -385,7 +385,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -407,7 +407,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -427,7 +427,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-mrr.robot index 6465e9908a..c8727094aa 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-mrr.robot @@ -67,7 +67,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-ndrpdrdisc.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-ndrpdrdisc.robot index 072f87d19a..f683bc1d5f 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-ndrpdrdisc.robot @@ -70,7 +70,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -92,7 +92,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -115,7 +115,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -137,7 +137,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -160,7 +160,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -181,7 +181,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -203,7 +203,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -225,7 +225,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -248,7 +248,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -270,7 +270,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -293,7 +293,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -314,7 +314,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -336,7 +336,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -358,7 +358,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -381,7 +381,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -403,7 +403,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -426,7 +426,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -447,7 +447,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-mrr.robot index 3ede79a377..b7af05e9f5 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-mrr.robot @@ -67,7 +67,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-ndrpdrdisc.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-ndrpdrdisc.robot index 49096b780d..b03ed52703 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-ndrpdrdisc.robot @@ -70,7 +70,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -92,7 +92,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -115,7 +115,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -137,7 +137,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -160,7 +160,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -181,7 +181,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -203,7 +203,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -225,7 +225,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -248,7 +248,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -270,7 +270,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -293,7 +293,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -314,7 +314,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -336,7 +336,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -358,7 +358,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -381,7 +381,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -403,7 +403,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -426,7 +426,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -447,7 +447,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-mrr.robot index 79e09e9661..d6e5d4def3 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-mrr.robot @@ -67,7 +67,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-ndrpdrdisc.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-ndrpdrdisc.robot index 0d98761a28..3de12983dc 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-ndrpdrdisc.robot @@ -70,7 +70,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -92,7 +92,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -115,7 +115,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -137,7 +137,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -160,7 +160,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -181,7 +181,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -203,7 +203,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -225,7 +225,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -248,7 +248,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -270,7 +270,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -293,7 +293,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -314,7 +314,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -336,7 +336,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -358,7 +358,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -381,7 +381,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -403,7 +403,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -426,7 +426,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} @@ -447,7 +447,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-copwhtlistbase-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-copwhtlistbase-mrr.robot index 517b6bee48..9eb9fc5480 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-copwhtlistbase-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-copwhtlistbase-mrr.robot @@ -67,7 +67,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-mrr.robot index c2f31eaf1f..94df169c1b 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-mrr.robot @@ -65,7 +65,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-mrr.robot index 6b3843ce4d..d750f1af09 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-mrr.robot @@ -63,7 +63,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-mrr.robot index fde73ac291..9702b61104 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-mrr.robot @@ -67,7 +67,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-mrr.robot index f49f0f7fd3..5d3ba819cf 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-mrr.robot @@ -67,7 +67,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-mrr.robot index 853f0297f4..5d49a9c8c1 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-mrr.robot @@ -67,7 +67,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/ip6/40ge2p1xl710-ethip6-ip6base-mrr.robot b/tests/vpp/perf/ip6/40ge2p1xl710-ethip6-ip6base-mrr.robot index 77915f3760..1976b326d2 100644 --- a/tests/vpp/perf/ip6/40ge2p1xl710-ethip6-ip6base-mrr.robot +++ b/tests/vpp/perf/ip6/40ge2p1xl710-ethip6-ip6base-mrr.robot @@ -68,7 +68,7 @@ | | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 diff --git a/tests/vpp/perf/ip6/40ge2p1xl710-ethip6-ip6base-ndrpdrdisc.robot b/tests/vpp/perf/ip6/40ge2p1xl710-ethip6-ip6base-ndrpdrdisc.robot index 2389bfae49..80cf495047 100644 --- a/tests/vpp/perf/ip6/40ge2p1xl710-ethip6-ip6base-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip6/40ge2p1xl710-ethip6-ip6base-ndrpdrdisc.robot @@ -69,7 +69,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -92,7 +92,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -115,7 +115,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -138,7 +138,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -161,7 +161,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -184,7 +184,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 diff --git a/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip4-ip6base-ndrpdrdisc.robot b/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip4-ip6base-ndrpdrdisc.robot index 12b80408ff..9f3662ac31 100644 --- a/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip4-ip6base-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip4-ip6base-ndrpdrdisc.robot @@ -67,7 +67,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology @@ -97,7 +97,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology @@ -128,7 +128,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology @@ -158,7 +158,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology @@ -189,7 +189,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4} @@ -218,7 +218,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4} @@ -248,7 +248,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology @@ -278,7 +278,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology @@ -309,7 +309,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology @@ -339,7 +339,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology @@ -370,7 +370,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4} @@ -399,7 +399,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4} @@ -429,7 +429,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology @@ -459,7 +459,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology @@ -490,7 +490,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology @@ -520,7 +520,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology @@ -551,7 +551,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4} @@ -580,7 +580,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4} diff --git a/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip6-ip6base-ndrpdrdisc.robot b/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip6-ip6base-ndrpdrdisc.robot index cd2296edcc..8800f6b426 100644 --- a/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip6-ip6base-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip6-ip6base-ndrpdrdisc.robot @@ -67,7 +67,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology @@ -97,7 +97,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology @@ -128,7 +128,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology @@ -158,7 +158,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology @@ -189,7 +189,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} @@ -218,7 +218,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} @@ -248,7 +248,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology @@ -278,7 +278,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology @@ -309,7 +309,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology @@ -339,7 +339,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology @@ -370,7 +370,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} @@ -399,7 +399,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} @@ -429,7 +429,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology @@ -459,7 +459,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology @@ -490,7 +490,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology @@ -520,7 +520,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology @@ -551,7 +551,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} @@ -580,7 +580,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} diff --git a/tests/vpp/perf/l2/10ge2p1vic1227-eth-l2bdbasemaclrn-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1vic1227-eth-l2bdbasemaclrn-ndrpdrdisc.robot index e49a3cf203..c6d64772dc 100644 --- a/tests/vpp/perf/l2/10ge2p1vic1227-eth-l2bdbasemaclrn-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1vic1227-eth-l2bdbasemaclrn-ndrpdrdisc.robot @@ -71,7 +71,7 @@ | | Set Test Documentation | frames using binary search start at\ | append=True | | Set Test Documentation | 10GE linerate, step ${threshold}pps. | append=True | | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | Add PCI devices to DUTs in 3-node single link topology +| | Add PCI devices to all DUTs | | Run Keyword If | ${framesize} < ${1522} | Add no multi seg to all DUTs | | Apply startup configuration on all VPP DUTs | | Initialize L2 bridge domain in 3-node circular topology @@ -97,7 +97,7 @@ | | Set Test Documentation | LT=${perf_pdr_loss_acceptance} | append=True | | Set Test Documentation | ${perf_pdr_loss_acceptance_type}. | append=True | | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | Add PCI devices to DUTs in 3-node single link topology +| | Add PCI devices to all DUTs | | Run Keyword If | ${framesize} < ${1522} | Add no multi seg to all DUTs | | Apply startup configuration on all VPP DUTs | | Initialize L2 bridge domain in 3-node circular topology diff --git a/tests/vpp/perf/l2/10ge2p1x520-dot1ad-l2xcbase-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-dot1ad-l2xcbase-ndrpdrdisc.robot index 98f279fd33..7b7c9828d3 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-dot1ad-l2xcbase-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-dot1ad-l2xcbase-ndrpdrdisc.robot @@ -75,7 +75,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -105,7 +105,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -136,7 +136,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -166,7 +166,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -197,7 +197,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up | | When Initialize VLAN sub-interfaces in 3-node circular topology @@ -226,7 +226,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up | | When Initialize VLAN sub-interfaces in 3-node circular topology @@ -256,7 +256,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -286,7 +286,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -317,7 +317,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -347,7 +347,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -378,7 +378,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up | | When Initialize VLAN sub-interfaces in 3-node circular topology @@ -407,7 +407,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up | | When Initialize VLAN sub-interfaces in 3-node circular topology @@ -437,7 +437,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -467,7 +467,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -498,7 +498,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -528,7 +528,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -559,7 +559,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up | | When Initialize VLAN sub-interfaces in 3-node circular topology @@ -588,7 +588,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up | | When Initialize VLAN sub-interfaces in 3-node circular topology diff --git a/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2bdbasemaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2bdbasemaclrn-mrr.robot index 73de46dd9f..9aa0d3597f 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2bdbasemaclrn-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2bdbasemaclrn-mrr.robot @@ -73,7 +73,7 @@ | | ... | ${get_framesize} + ${vlan_overhead} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2bdbasemaclrn-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2bdbasemaclrn-ndrpdrdisc.robot index 30636c79f6..f968c6cb57 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2bdbasemaclrn-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2bdbasemaclrn-ndrpdrdisc.robot @@ -77,7 +77,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-mrr.robot index 626cc2f640..8ff0ac3de5 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-mrr.robot @@ -68,7 +68,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-ndrpdrdisc.robot index e832193814..613ffa0541 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-ndrpdrdisc.robot @@ -71,7 +71,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -100,7 +100,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -130,7 +130,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -159,7 +159,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -189,7 +189,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up | | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology @@ -217,7 +217,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up | | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology @@ -246,7 +246,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -275,7 +275,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -305,7 +305,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -334,7 +334,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -364,7 +364,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up | | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology @@ -392,7 +392,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up | | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology @@ -421,7 +421,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -450,7 +450,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -480,7 +480,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -509,7 +509,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -539,7 +539,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up | | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology @@ -567,7 +567,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up | | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdrdisc.robot index 470ed69871..98ca3ffc6e 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdrdisc.robot index cbf10eb1e0..32eede5ff4 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdrdisc.robot index 8a5611a2d5..b828ae3868 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdrdisc.robot index 8025bb8eb0..46f8bf3ada 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdrdisc.robot index 148343a6c8..9c4bc847d8 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdrdisc.robot index dcc19d1acb..35be5bd1be 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdrdisc.robot index 5d45d6a057..a22a1fd9e6 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdrdisc.robot index d50d981c09..9d432d2953 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-10kflows-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-10kflows-mrr.robot index 9702ce5e89..5830856f89 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-10kflows-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-10kflows-mrr.robot @@ -86,7 +86,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdrdisc.robot index 711fad9b2f..b3b19f1524 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdrdisc.robot index a16268689f..c0e908301e 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdrdisc.robot index 601822426f..3b754b301b 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-10kflows-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-10kflows-mrr.robot index 583f1bf883..26e2fbd8dd 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-10kflows-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-10kflows-mrr.robot @@ -86,7 +86,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdrdisc.robot index c589a5bfe9..792e573385 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdrdisc.robot index de1d236096..1e5ebd5110 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdrdisc.robot index 2107b22d07..f65fd3a759 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr.robot index 6d22abfb53..53adad946b 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr.robot @@ -86,7 +86,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdrdisc.robot index beb74af580..2723e3f1e6 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdrdisc.robot index d10545d1c1..1b0901f140 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdrdisc.robot index 86daf12fe9..079c49cc55 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr.robot index 842dad1abe..8fb3283602 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr.robot @@ -86,7 +86,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdrdisc.robot index 213cf3e46c..e1314ca274 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdrdisc.robot index 5872f61962..fee697ae63 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdrdisc.robot @@ -90,7 +90,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdrdisc.robot index e7e2f55b13..b717abc0d5 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdrdisc.robot @@ -90,7 +90,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdrdisc.robot index 716a6d7c95..807b5debdd 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdrdisc.robot @@ -90,7 +90,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdrdisc.robot index cb898893bc..58c74570f9 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdrdisc.robot @@ -90,7 +90,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdrdisc.robot index 29b8131cc6..cda88636b2 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdrdisc.robot @@ -90,7 +90,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdrdisc.robot index f7d6472ad6..387d822f64 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdrdisc.robot @@ -90,7 +90,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdrdisc.robot index ca871f3862..6613adf037 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdrdisc.robot @@ -90,7 +90,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdrdisc.robot index 552e583c1a..4ebd00688c 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdrdisc.robot @@ -90,7 +90,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdrdisc.robot index 132dd682d5..2487be23a9 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdrdisc.robot @@ -90,7 +90,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-mrr.robot index e59d177cf1..46b51f6c67 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-mrr.robot @@ -63,7 +63,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-ndrpdrdisc.robot index a4ed3a5367..34d3e99236 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-ndrpdrdisc.robot @@ -66,7 +66,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | Add PCI devices to DUTs in 3-node single link topology +| | Add PCI devices to all DUTs | | Run Keyword If | ${get_framesize} < ${1522} | Add No Multi Seg to all DUTs | | Apply startup configuration on all VPP DUTs | | Initialize L2 bridge domain in 3-node circular topology diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdrdisc.robot index 1bccf5e92d..0a5bb3240b 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdrdisc.robot index e49be514d5..80c5d6330c 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdrdisc.robot index f3c42f1da6..f7a6cc83e5 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdrdisc.robot index d2981ccac7..caa32db1b7 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdrdisc.robot index a5f18bb9db..75076a3ecb 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdrdisc.robot index f0d0052aeb..9acee4b13d 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdrdisc.robot index 7fae4cbf99..80d3c0e880 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdrdisc.robot index 69694e7114..60da8e8cf9 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdrdisc.robot index 8864f0b3e5..19b2b407fb 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdrdisc.robot index ae5f79df4f..23832866e6 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdrdisc.robot index 640d07a45e..771908fd91 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdrdisc.robot index f4b028a289..94f05f0405 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdrdisc.robot index 7b69dc724b..9625d5c1f6 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdrdisc.robot index c811d7b03e..15110805e0 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdrdisc.robot index 7694361d29..f58c59e21a 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdrdisc.robot index 6fd7bdac65..d58d6e70cc 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdrdisc.robot index b20028ed65..4128fa4446 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdrdisc.robot index ab7e00b10a..b0e9d96a88 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale100kmaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale100kmaclrn-mrr.robot index e02e6066ca..f047bb41f4 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale100kmaclrn-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale100kmaclrn-mrr.robot @@ -62,7 +62,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale100kmaclrn-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale100kmaclrn-ndrpdrdisc.robot index 120f84064e..d855f391e5 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale100kmaclrn-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale100kmaclrn-ndrpdrdisc.robot @@ -69,7 +69,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | Add PCI devices to DUTs in 3-node single link topology +| | Add PCI devices to all DUTs | | Run Keyword If | ${get_framesize} < ${1522} | Add No Multi Seg to all DUTs | | Apply startup configuration on all VPP DUTs | | Initialize L2 bridge domain in 3-node circular topology diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale10kmaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale10kmaclrn-mrr.robot index ea75bdcb1c..0bae55854e 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale10kmaclrn-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale10kmaclrn-mrr.robot @@ -62,7 +62,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale10kmaclrn-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale10kmaclrn-ndrpdrdisc.robot index 4e815379f8..dba5f6df40 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale10kmaclrn-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale10kmaclrn-ndrpdrdisc.robot @@ -69,7 +69,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | Add PCI devices to DUTs in 3-node single link topology +| | Add PCI devices to all DUTs | | Run Keyword If | ${get_framesize} < ${1522} | Add No Multi Seg to all DUTs | | Apply startup configuration on all VPP DUTs | | Initialize L2 bridge domain in 3-node circular topology diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale1mmaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale1mmaclrn-mrr.robot index 418081eef9..b71479408b 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale1mmaclrn-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale1mmaclrn-mrr.robot @@ -68,7 +68,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale1mmaclrn-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale1mmaclrn-ndrpdrdisc.robot index 98cd7c5224..8b208e2bfc 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale1mmaclrn-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale1mmaclrn-ndrpdrdisc.robot @@ -69,7 +69,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | Add PCI devices to DUTs in 3-node single link topology +| | Add PCI devices to all DUTs | | Run Keyword If | ${get_framesize} < ${1522} | Add No Multi Seg to all DUTs | | Apply startup configuration on all VPP DUTs | | Initialize L2 bridge domain in 3-node circular topology diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-mrr.robot index df65c7101f..e4be3441ad 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-mrr.robot @@ -62,7 +62,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-ndrpdrdisc.robot index 5e46d9c5fd..b62bb0eace 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-ndrpdrdisc.robot @@ -69,7 +69,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology @@ -90,7 +90,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology @@ -112,7 +112,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology @@ -133,7 +133,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology @@ -155,7 +155,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -175,7 +175,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} @@ -196,7 +196,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology @@ -217,7 +217,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology @@ -239,7 +239,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology @@ -260,7 +260,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology @@ -282,7 +282,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -302,7 +302,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} @@ -323,7 +323,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology @@ -344,7 +344,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology @@ -366,7 +366,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology @@ -387,7 +387,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology @@ -409,7 +409,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -429,7 +429,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-mrr.robot index 2084c1dada..dad5bd6a80 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-mrr.robot @@ -73,7 +73,7 @@ | | ... | ${get_framesize} + ${vlan_overhead} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-mrr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-mrr.robot index b3a35639c9..b6d7acc32f 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-mrr.robot @@ -68,7 +68,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-mrr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-mrr.robot index 7a0f4d0e7f..6d31f09655 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-mrr.robot @@ -86,7 +86,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-mrr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-mrr.robot index 683c1ef1bf..4d9b30950a 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-mrr.robot @@ -86,7 +86,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr.robot index 8fca0590f1..a33a4038bd 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr.robot @@ -86,7 +86,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr.robot index 2c59bd975c..2e8fc306cf 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr.robot @@ -86,7 +86,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-mrr.robot index be33cdabab..80faef1f6b 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-mrr.robot @@ -63,7 +63,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdrdisc.robot index 769c0d8741..cffe46f767 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdrdisc.robot @@ -64,7 +64,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | Add PCI devices to DUTs in 3-node single link topology +| | Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | Apply startup configuration on all VPP DUTs @@ -82,7 +82,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | Add PCI devices to DUTs in 3-node single link topology +| | Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-mrr.robot index 84cc3d7d4a..deb6a0627c 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-mrr.robot @@ -62,7 +62,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-mrr.robot index 8b40ae53b2..d0c94e53e5 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-mrr.robot @@ -62,7 +62,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-mrr.robot index 536cf90a14..db3b50fe14 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-mrr.robot @@ -68,7 +68,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-mrr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-mrr.robot index 375ba03ac0..e457359a3f 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-mrr.robot @@ -62,7 +62,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/40ge2p1vic1385-eth-l2bdbasemaclrn-ndrpdrdisc.robot b/tests/vpp/perf/l2/40ge2p1vic1385-eth-l2bdbasemaclrn-ndrpdrdisc.robot index f903a1c3f1..31155e24a0 100644 --- a/tests/vpp/perf/l2/40ge2p1vic1385-eth-l2bdbasemaclrn-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/40ge2p1vic1385-eth-l2bdbasemaclrn-ndrpdrdisc.robot @@ -74,7 +74,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain in 3-node circular topology @@ -98,7 +98,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain in 3-node circular topology @@ -123,7 +123,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain in 3-node circular topology @@ -147,7 +147,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain in 3-node circular topology @@ -171,7 +171,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain in 3-node circular topology @@ -195,7 +195,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain in 3-node circular topology @@ -220,7 +220,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain in 3-node circular topology @@ -244,7 +244,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain in 3-node circular topology @@ -268,7 +268,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain in 3-node circular topology @@ -293,7 +293,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain in 3-node circular topology @@ -318,7 +318,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain in 3-node circular topology @@ -343,7 +343,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain in 3-node circular topology diff --git a/tests/vpp/perf/l2/40ge2p1xl710-eth-l2bdbasemaclrn-mrr.robot b/tests/vpp/perf/l2/40ge2p1xl710-eth-l2bdbasemaclrn-mrr.robot index 6e97bd72f5..a987f468d7 100644 --- a/tests/vpp/perf/l2/40ge2p1xl710-eth-l2bdbasemaclrn-mrr.robot +++ b/tests/vpp/perf/l2/40ge2p1xl710-eth-l2bdbasemaclrn-mrr.robot @@ -69,7 +69,7 @@ | | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 diff --git a/tests/vpp/perf/l2/40ge2p1xl710-eth-l2bdbasemaclrn-ndrpdrdisc.robot b/tests/vpp/perf/l2/40ge2p1xl710-eth-l2bdbasemaclrn-ndrpdrdisc.robot index 872bfb7983..cba51bfeac 100644 --- a/tests/vpp/perf/l2/40ge2p1xl710-eth-l2bdbasemaclrn-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/40ge2p1xl710-eth-l2bdbasemaclrn-ndrpdrdisc.robot @@ -67,7 +67,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | Add PCI devices to DUTs in 3-node single link topology +| | Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | Add DPDK dev default RXD to all DUTs | 2048 @@ -94,7 +94,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | Add PCI devices to DUTs in 3-node single link topology +| | Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | Add DPDK dev default RXD to all DUTs | 2048 diff --git a/tests/vpp/perf/l2/40ge2p1xl710-eth-l2xcbase-mrr.robot b/tests/vpp/perf/l2/40ge2p1xl710-eth-l2xcbase-mrr.robot index d2bfa4ceff..2fe26432e7 100644 --- a/tests/vpp/perf/l2/40ge2p1xl710-eth-l2xcbase-mrr.robot +++ b/tests/vpp/perf/l2/40ge2p1xl710-eth-l2xcbase-mrr.robot @@ -70,7 +70,7 @@ | | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 diff --git a/tests/vpp/perf/l2/40ge2p1xl710-eth-l2xcbase-ndrpdrdisc.robot b/tests/vpp/perf/l2/40ge2p1xl710-eth-l2xcbase-ndrpdrdisc.robot index 898571529d..1d81df3a5c 100644 --- a/tests/vpp/perf/l2/40ge2p1xl710-eth-l2xcbase-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/40ge2p1xl710-eth-l2xcbase-ndrpdrdisc.robot @@ -71,7 +71,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -94,7 +94,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -117,7 +117,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -140,7 +140,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -163,7 +163,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -186,7 +186,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -210,7 +210,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -234,7 +234,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -258,7 +258,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-mrr.robot index 3a45f85ab8..f0cd620c94 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-mrr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-mrr.robot @@ -83,7 +83,7 @@ | | ... | ${get_framesize} + ${srv6_overhead_nosrh} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding over SRv6 with encapsulation with '1' x SID 'with' decapsulation in 3-node circular topology diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-ndrpdrdisc.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-ndrpdrdisc.robot index d6fbcc03ee..4f9adaccd0 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-ndrpdrdisc.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-ndrpdrdisc.robot @@ -90,7 +90,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding over SRv6 with encapsulation with '1' x SID 'with' decapsulation in 3-node circular topology diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-mrr.robot index 1fab4390ae..38dcf0a0d7 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-mrr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-mrr.robot @@ -86,7 +86,7 @@ | | ... | ${get_framesize} + ${srv6_overhead_2sids} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding over SRv6 with encapsulation with '2' x SID 'with' decapsulation in 3-node circular topology diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-ndrpdrdisc.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-ndrpdrdisc.robot index c12bff9f36..a9e2e0b9e7 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-ndrpdrdisc.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-ndrpdrdisc.robot @@ -93,7 +93,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding over SRv6 with encapsulation with '2' x SID 'with' decapsulation in 3-node circular topology diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr.robot index c22e727b60..b9404ab021 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr.robot @@ -85,7 +85,7 @@ | | ... | ${get_framesize} + ${srv6_overhead_2sids} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding over SRv6 with encapsulation with '2' x SID 'without' decapsulation in 3-node circular topology diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdrdisc.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdrdisc.robot index d563109b4a..16f33f6e7e 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdrdisc.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdrdisc.robot @@ -92,7 +92,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding over SRv6 with encapsulation with '2' x SID 'without' decapsulation in 3-node circular topology diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-mrr.robot index f138ca0c9f..c56f8fd801 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-mrr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-mrr.robot @@ -110,7 +110,7 @@ | | ... | ${get_framesize} + ${srv6_overhead_3sids} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} + ${srv6_overhead_3sids} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdrdisc.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdrdisc.robot index cce65f13b0..ac34dad136 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdrdisc.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdrdisc.robot @@ -117,7 +117,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} + ${srv6_overhead_3sids} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot index 2981da786e..f57b71e192 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot @@ -110,7 +110,7 @@ | | ... | ${get_framesize} + ${srv6_overhead_3sids} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} + ${srv6_overhead_3sids} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdrdisc.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdrdisc.robot index 98b498ed03..96e1f0e089 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdrdisc.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdrdisc.robot @@ -117,7 +117,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} + ${srv6_overhead_3sids} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-mrr.robot index ef0c95706f..437e26c35b 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-mrr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-mrr.robot @@ -110,7 +110,7 @@ | | ... | ${get_framesize} + ${srv6_overhead_3sids} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} + ${srv6_overhead_3sids} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdrdisc.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdrdisc.robot index 580e595d8f..1081bfc0e5 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdrdisc.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdrdisc.robot @@ -117,7 +117,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} + ${srv6_overhead_3sids} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/tcp/10ge2p1x520-ethip4tcphttp-httpserver.robot b/tests/vpp/perf/tcp/10ge2p1x520-ethip4tcphttp-httpserver.robot index 55f6982ff1..7ce6a9fbe6 100644 --- a/tests/vpp/perf/tcp/10ge2p1x520-ethip4tcphttp-httpserver.robot +++ b/tests/vpp/perf/tcp/10ge2p1x520-ethip4tcphttp-httpserver.robot @@ -41,7 +41,7 @@ | | [Arguments] | ${traffic_profile} | ${wt} | ${rxq} | ${test_type} | | ... | | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | Add PCI devices to DUTs in 3-node single link topology +| | Add PCI devices to all DUTs | | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | Import Library | resources.libraries.python.VppConfigGenerator diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot index 565150e3b0..b97e26243a 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot @@ -93,7 +93,7 @@ | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Add DPDK bonded Ethernet interfaces to DUTs in 3-node single link topology | | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index f87515369b..865fef181c 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -105,7 +105,7 @@ | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Add DPDK bonded Ethernet interfaces to DUTs in 3-node single link topology | | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot index 5aae73d514..441df99be1 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot @@ -91,7 +91,7 @@ | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Add DPDK bonded Ethernet interfaces to DUTs in 3-node single link topology | | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index 1077d1859b..bd901bb75a 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -105,7 +105,7 @@ | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Add DPDK bonded Ethernet interfaces to DUTs in 3-node single link topology | | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot index 2529f4d387..ff90ee3c99 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot @@ -96,7 +96,7 @@ | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index 004832bf3c..b1da0ec28a 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -107,7 +107,7 @@ | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot index 77fc245797..0224a09b85 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot @@ -93,7 +93,7 @@ | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index 1053ab311e..c409ab446d 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -107,7 +107,7 @@ | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot index 987b761738..d69b2468d9 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot @@ -86,7 +86,7 @@ | | ... | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index 41d5cc8784..f17401f393 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -90,7 +90,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VLAN in a 3-node circular topology @@ -124,7 +124,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VLAN in a 3-node circular topology @@ -159,7 +159,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VLAN in a 3-node circular topology @@ -193,7 +193,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VLAN in a 3-node circular topology @@ -230,7 +230,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VLAN in a 3-node circular topology @@ -266,7 +266,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VLAN in a 3-node circular topology @@ -301,7 +301,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VLAN in a 3-node circular topology @@ -335,7 +335,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VLAN in a 3-node circular topology @@ -370,7 +370,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VLAN in a 3-node circular topology @@ -404,7 +404,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VLAN in a 3-node circular topology @@ -441,7 +441,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VLAN in a 3-node circular topology @@ -477,7 +477,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VLAN in a 3-node circular topology @@ -512,7 +512,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VLAN in a 3-node circular topology @@ -546,7 +546,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VLAN in a 3-node circular topology @@ -581,7 +581,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VLAN in a 3-node circular topology @@ -615,7 +615,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VLAN in a 3-node circular topology @@ -652,7 +652,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VLAN in a 3-node circular topology @@ -688,7 +688,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VLAN in a 3-node circular topology diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot index 89db0c8234..b63780c503 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot @@ -83,7 +83,7 @@ | | ... | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index a85c7c0c4f..5a9f780ee9 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -87,7 +87,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology @@ -120,7 +120,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology @@ -154,7 +154,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology @@ -187,7 +187,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology @@ -223,7 +223,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology @@ -258,7 +258,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology @@ -292,7 +292,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology @@ -325,7 +325,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology @@ -359,7 +359,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology @@ -392,7 +392,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology @@ -428,7 +428,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology @@ -463,7 +463,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology @@ -497,7 +497,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology @@ -530,7 +530,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology @@ -564,7 +564,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology @@ -597,7 +597,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology @@ -633,7 +633,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology @@ -668,7 +668,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot index d5fc2e9b36..55286d2b4d 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot @@ -90,7 +90,7 @@ | | Set Test Variable | ${dut1_vm_refs} | | Set Test Variable | ${dut2_vm_refs} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot index ec2adf2e65..318879a086 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot @@ -83,7 +83,7 @@ | | ... | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot index 498a794aff..bee8b18ffa 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -93,7 +93,7 @@ | | ... | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index ed3be3d902..093da0c795 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -83,7 +83,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -113,7 +113,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -144,7 +144,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -174,7 +174,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -206,7 +206,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -237,7 +237,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -268,7 +268,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -298,7 +298,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -329,7 +329,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -359,7 +359,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -391,7 +391,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -422,7 +422,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -453,7 +453,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -483,7 +483,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -514,7 +514,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -544,7 +544,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -576,7 +576,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -607,7 +607,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot index e1df194e57..1465c9f3cd 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot @@ -104,7 +104,7 @@ | | Set Test Variable | ${dut1_vm_refs} | | Set Test Variable | ${dut2_vm_refs} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr.robot index 82823d848b..47a4003b63 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr.robot @@ -83,7 +83,7 @@ | | ... | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrpdrdisc.robot index 9a24555b23..3eda396c59 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrpdrdisc.robot @@ -101,7 +101,7 @@ | | Set Test Variable | ${dut1_vm_refs} | | Set Test Variable | ${dut2_vm_refs} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot index 59178d626d..e812713e3d 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot @@ -82,7 +82,7 @@ | | Set Test Variable | ${jumbo_frames} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc.robot index e8cbb5b0aa..a80247d5e0 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc.robot @@ -91,7 +91,7 @@ | | Set Test Variable | ${jumbo_frames} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot index 0ca2df6c80..bc0e48f7b5 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot @@ -93,7 +93,7 @@ | | Set Test Variable | ${dut1_vm_refs} | | Set Test Variable | ${dut2_vm_refs} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot index 9359816fe0..6230ec70b9 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot @@ -93,7 +93,7 @@ | | Set Test Variable | ${dut1_vm_refs} | | Set Test Variable | ${dut2_vm_refs} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot index 9176bdeaaa..4f1bc33705 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot @@ -93,7 +93,7 @@ | | Set Test Variable | ${dut1_vm_refs} | | Set Test Variable | ${dut2_vm_refs} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot index 9c88337e98..98ec0bcff5 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot @@ -87,7 +87,7 @@ | | Set Test Variable | ${dut1_vm_refs} | | Set Test Variable | ${dut2_vm_refs} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User in 3-node circular topology diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot index 232894745c..9b4d9e9920 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot @@ -80,7 +80,7 @@ | | ... | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index 5d140f5e57..cba82a6afa 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -79,7 +79,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User in 3-node circular topology @@ -109,7 +109,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User in 3-node circular topology @@ -140,7 +140,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User in 3-node circular topology @@ -170,7 +170,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User in 3-node circular topology @@ -202,7 +202,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User in 3-node circular topology @@ -233,7 +233,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User in 3-node circular topology @@ -264,7 +264,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User in 3-node circular topology @@ -294,7 +294,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User in 3-node circular topology @@ -325,7 +325,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User in 3-node circular topology @@ -355,7 +355,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User in 3-node circular topology @@ -387,7 +387,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User in 3-node circular topology @@ -418,7 +418,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User in 3-node circular topology @@ -449,7 +449,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User in 3-node circular topology @@ -479,7 +479,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User in 3-node circular topology @@ -510,7 +510,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User in 3-node circular topology @@ -540,7 +540,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User in 3-node circular topology @@ -572,7 +572,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User in 3-node circular topology @@ -603,7 +603,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User in 3-node circular topology diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot index fb9c2cb283..1409f46b07 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot @@ -101,7 +101,7 @@ | | Set Test Variable | ${dut1_vm_refs} | | Set Test Variable | ${dut2_vm_refs} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User in 3-node circular topology diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-mrr.robot index 190e7482be..66bf0775d0 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-mrr.robot @@ -80,7 +80,7 @@ | | ... | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-ndrpdrdisc.robot index 2f696b23df..fcfdcd3a2f 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-ndrpdrdisc.robot @@ -98,7 +98,7 @@ | | Set Test Variable | ${dut1_vm_refs} | | Set Test Variable | ${dut2_vm_refs} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with Vhost-User in 3-node circular topology diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr.robot index 867632a5df..fa26096ffd 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr.robot @@ -82,7 +82,7 @@ | | Set Test Variable | ${jumbo_frames} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc.robot index b80c61a726..9d56d29e71 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc.robot @@ -92,7 +92,7 @@ | | Set Test Variable | ${jumbo_frames} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot index f0ff7f2752..58e12b0cd4 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot @@ -90,7 +90,7 @@ | | Set Test Variable | ${dut1_vm_refs} | | Set Test Variable | ${dut2_vm_refs} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with vhost in 3-node circular topology diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr.robot index 664c11cb72..e8e995f7a1 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr.robot @@ -83,7 +83,7 @@ | | ... | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index 31dc4384cb..c556e9ce0f 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with vhost in 3-node circular topology @@ -114,7 +114,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with vhost in 3-node circular topology @@ -147,7 +147,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with vhost in 3-node circular topology @@ -179,7 +179,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with vhost in 3-node circular topology @@ -213,7 +213,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with vhost in 3-node circular topology @@ -246,7 +246,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with vhost in 3-node circular topology @@ -279,7 +279,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with vhost in 3-node circular topology @@ -311,7 +311,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with vhost in 3-node circular topology @@ -344,7 +344,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with vhost in 3-node circular topology @@ -376,7 +376,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with vhost in 3-node circular topology @@ -410,7 +410,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with vhost in 3-node circular topology @@ -443,7 +443,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with vhost in 3-node circular topology @@ -476,7 +476,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with vhost in 3-node circular topology @@ -508,7 +508,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with vhost in 3-node circular topology @@ -541,7 +541,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with vhost in 3-node circular topology @@ -573,7 +573,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with vhost in 3-node circular topology @@ -607,7 +607,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with vhost in 3-node circular topology @@ -640,7 +640,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with vhost in 3-node circular topology diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot index c57b293220..e378173269 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot @@ -104,7 +104,7 @@ | | Set Test Variable | ${dut1_vm_refs} | | Set Test Variable | ${dut2_vm_refs} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with vhost in 3-node circular topology diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-mrr.robot index fb0084ea16..15b5839035 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-mrr.robot @@ -83,7 +83,7 @@ | | ... | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-ndrpdrdisc.robot index bd807cf479..2c4d48cc6e 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-ndrpdrdisc.robot @@ -101,7 +101,7 @@ | | Set Test Variable | ${dut1_vm_refs} | | Set Test Variable | ${dut2_vm_refs} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with vhost in 3-node circular topology diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr.robot index cdd6e90704..c3c15f6f83 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr.robot @@ -88,7 +88,7 @@ | | Set Test Variable | ${jumbo_frames} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc.robot index 2243f9ac71..86f0b6a5d9 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc.robot @@ -93,7 +93,7 @@ | | Set Test Variable | ${jumbo_frames} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot index c11a4fff9b..17f5cc66f8 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot @@ -88,7 +88,7 @@ | | ... | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index 3fe47b1fe8..a211e3f996 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -90,7 +90,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology @@ -123,7 +123,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology @@ -157,7 +157,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} @@ -189,7 +189,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} @@ -224,7 +224,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} @@ -258,7 +258,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} @@ -291,7 +291,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology @@ -324,7 +324,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology @@ -358,7 +358,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} @@ -390,7 +390,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} @@ -425,7 +425,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} @@ -459,7 +459,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} @@ -492,7 +492,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology @@ -525,7 +525,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology @@ -559,7 +559,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} @@ -591,7 +591,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} @@ -626,7 +626,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} @@ -660,7 +660,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot index f3f0593299..35abd509d6 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot @@ -93,7 +93,7 @@ | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Add DPDK bonded Ethernet interfaces to DUTs in 3-node single link topology | | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index 9810012120..21be10bcc9 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -105,7 +105,7 @@ | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Add DPDK bonded Ethernet interfaces to DUTs in 3-node single link topology | | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot index 5f9ad2b8cf..e045f95bc4 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot @@ -91,7 +91,7 @@ | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Add DPDK bonded Ethernet interfaces to DUTs in 3-node single link topology | | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index 47c5c2ddc3..eb57384fb3 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -105,7 +105,7 @@ | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Add DPDK bonded Ethernet interfaces to DUTs in 3-node single link topology | | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot index 5001e1e74a..67ab0ad2b9 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot @@ -96,7 +96,7 @@ | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index f6705061d4..fee8d01c1d 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -107,7 +107,7 @@ | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot index 50fbecaaa1..67c2628111 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot @@ -93,7 +93,7 @@ | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index 859b74d008..f36f6d1eab 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -107,7 +107,7 @@ | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot index bbfc93ffdf..8dd2516524 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot @@ -86,7 +86,7 @@ | | ... | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot index 5b1e104e93..37c7e432bb 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot @@ -83,7 +83,7 @@ | | ... | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index 1ac64d38c1..9373291745 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -85,7 +85,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -117,7 +117,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -150,7 +150,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -182,7 +182,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -216,7 +216,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -249,7 +249,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} @@ -281,7 +281,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -313,7 +313,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -346,7 +346,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -378,7 +378,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -412,7 +412,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -445,7 +445,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -478,7 +478,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -510,7 +510,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -543,7 +543,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -575,7 +575,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -609,7 +609,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -642,7 +642,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr.robot index a7432184f2..a65b5b68ed 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr.robot @@ -83,7 +83,7 @@ | | ... | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot index fbe754eff4..b656fdd27e 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot @@ -82,7 +82,7 @@ | | Set Test Variable | ${jumbo_frames} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot index 6d351f95cc..332f4dc306 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot @@ -80,7 +80,7 @@ | | ... | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr256-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr256-1vm-mrr.robot index 01f9127ea2..cafd1f0f14 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr256-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr256-1vm-mrr.robot @@ -80,7 +80,7 @@ | | ... | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr.robot index e11886bd39..6ec3e13bb2 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr.robot @@ -82,7 +82,7 @@ | | Set Test Variable | ${jumbo_frames} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr.robot index ca36a3d926..c89e3bd935 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr.robot @@ -83,7 +83,7 @@ | | ... | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr256-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr256-1vm-mrr.robot index 4c692d0113..a01ac523fc 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr256-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr256-1vm-mrr.robot @@ -83,7 +83,7 @@ | | ... | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr.robot index 2300907645..e2fbc2930c 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr.robot @@ -88,7 +88,7 @@ | | Set Test Variable | ${jumbo_frames} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot index ee4d11c1ea..3a21834366 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot @@ -88,7 +88,7 @@ | | ... | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/40ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/40ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot index b75af8f3b5..16dab41c87 100644 --- a/tests/vpp/perf/vm_vhost/40ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/40ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot @@ -82,7 +82,7 @@ | | ... | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot index ae5f4b8cfc..ab81553125 100644 --- a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot @@ -86,7 +86,7 @@ | | ... | ${False} | ${True} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index 4fafafe212..376b0dbb7d 100644 --- a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -87,7 +87,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -119,7 +119,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -152,7 +152,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -184,7 +184,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -218,7 +218,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -251,7 +251,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} @@ -283,7 +283,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -315,7 +315,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -348,7 +348,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -380,7 +380,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -414,7 +414,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -447,7 +447,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -480,7 +480,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -512,7 +512,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -545,7 +545,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -577,7 +577,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -611,7 +611,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -644,7 +644,7 @@ | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology diff --git a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot index 2c559fd98f..25aab22f3e 100644 --- a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot @@ -86,7 +86,7 @@ | | Set Test Variable | ${jumbo_frames} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc.robot index 846b61adc1..934dad6697 100644 --- a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc.robot @@ -97,7 +97,7 @@ | | Set Test Variable | ${jumbo_frames} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc.robot index e50ce81808..2e251b1c6d 100644 --- a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc.robot @@ -97,7 +97,7 @@ | | Set Test Variable | ${jumbo_frames} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/40ge2p1xl710-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/40ge2p1xl710-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc.robot index af372ffe82..c8c84e9676 100644 --- a/tests/vpp/perf/vm_vhost/40ge2p1xl710-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/40ge2p1xl710-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc.robot @@ -97,7 +97,7 @@ | | Set Test Variable | ${jumbo_frames} | | ... | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-2vhostvr1024-1vm-ndrpdrdisc.robot index 95cbbdfb4d..6e2ae8425a 100644 --- a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -130,7 +130,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | ${max_pkt_size} | | ${binary_max}= | Set Variable | ${max_rate} | | Given Add '${num_of_threads}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | Add PCI devices to DUTs in 3-node single link topology +| | Add PCI devices to all DUTs | | And Run Keyword If | ${max_pkt_size} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs |