Remove selected VIRL tests

- These are not going to be converted to vpp_device

Change-Id: I0148be014fee476f3dc1a72c51316aace0f2350f
Signed-off-by: Peter Mikus <pmikus@cisco.com>

7 files changed, 0 insertions, 888 deletions

diff --git a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4arp-func.robot b/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4arp-func.robot
deleted file mode 100644
index 4f2bcfeb97..0000000000
--- a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4arp-func.robot
+++ /dev/null
@@ -1,87 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.Trace
-| ...
-| Resource | resources/libraries/robot/ip/ip4.robot
-| Resource | resources/libraries/robot/l2/l2_xconnect.robot
-| Resource | resources/libraries/robot/shared/counters.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| ...
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | SKIP_VPP_PATCH
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down functional test
-| ...
-| Documentation | *IPv4 ARP test cases*
-| ...
-| ... | RFC826 ARP: Eth-IPv4 and Eth-ARP on links TG-DUT1, TG-DUT2, DUT1-DUT2:
-| ... | IPv4 ARP tests use 3-node topology TG - DUT1 - DUT2 - TG with one link
-| ... | between the nodes. DUT1 and DUT2 are configured with IPv4 routing and
-| ... | static routes. DUT ARP functionality is tested by making TG send ICMPv4
-| ... | Echo Requests towards its other interface via DUT1 and DUT2.
-
-*** Variables ***
-| ${dut1_to_tg_ip}= | 192.168.1.1
-| ${dut1_to_dut2_ip}= | 192.168.2.1
-| ${dut1_to_dut2_ip_GW}= | 192.168.2.2
-| ${test_dst_ip}= | 32.0.0.1
-| ${test_src_ip}= | 16.0.0.1
-| ${prefix_length}= | 24
-
-*** Test Cases ***
-| TC01: DUT sends ARP Request for unresolved locally connected IPv4 address
-| | [Documentation]
-| | ... | Make TG send test packet destined to IPv4 address of its other\
-| | ... | interface connected to DUT2. Make TG verify DUT2 sends ARP
-| | ... | Request for locally connected TG IPv4 address.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | When VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | Then Send packet and verify ARP request | ${tg_node}
-| | ... | ${test_src_ip} | ${dut1_to_dut2_ip_GW} | ${tg_to_dut1}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac}
-| | ... | ${dut1_to_dut2_ip} | ${dut1_to_dut2_ip_GW}
-
-| TC02: DUT sends ARP Request for route next hop IPv4 address
-| | [Documentation] |
-| | ... | Make TG send test packet destined to IPv4 address matching\
-| | ... | static route on DUT2. Make TG verify DUT2 sends ARP Request for
-| | ... | next hop of the static route.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | When VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | Then Send packet and verify ARP request | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac}
-| | ... | ${dut1_to_dut2_ip} | ${dut1_to_dut2_ip_GW}
diff --git a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4ecmp-func.robot b/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4ecmp-func.robot
deleted file mode 100644
index 4738699803..0000000000
--- a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4ecmp-func.robot
+++ /dev/null
@@ -1,79 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-*** Settings ***
-| Library | resources.libraries.python.Trace
-| ...
-| Resource | resources/libraries/robot/ip/ip4.robot
-| Resource | resources/libraries/robot/shared/counters.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| ...
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO | SKIP_VPP_PATCH
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down functional test
-| ...
-| Documentation | *Ipv4 Multipath routing test cases*
-| ...
-| ... | *[Top] Network topologies:* TG=DUT 2-node topology with two links\
-| ... | between nodes.
-| ... | *[Cfg] DUT configuration:* On DUT configure interfaces IPv4 adresses,\
-| ... | and multipath routing.
-| ... | *[Ver] TG verification:* Test packets are sent from TG on the first\
-| ... | link to DUT. Packet is received on TG on the second link from DUT1.
-
-
-*** Variables ***
-| ${ip_1}= | 192.168.1.1
-| ${ip_2}= | 192.168.2.1
-| ${test_dst_ip}= | 32.0.0.1
-| ${test_src_ip}= | 16.0.0.1
-| ${prefix_length}= | 24
-| ${neighbor_1_ip}= | 192.168.2.10
-| ${neighbor_1_mac}= | 02:00:00:00:00:02
-| ${neighbor_2_ip}= | 192.168.2.20
-| ${neighbor_2_mac}= | 02:00:00:00:00:03
-
-*** Test Cases ***
-| TC01: IPv4 Equal-cost multipath routing
-| | [Documentation]
-| | ... | [Top] TG=DUT
-| | ... | [Cfg] On DUT configure multipath routing wiht two equal-cost paths.
-| | ... | [Ver] TG sends 100 IPv4 ICMP packets traffic on the first link to\
-| | ... | DUT. On second link to TG verify if traffic is divided into two paths.
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Set interfaces in 2-node circular topology up
-| | And VPP Interface Set IP Address | ${dut_node}
-| | ... | ${dut_to_tg_if2} | ${ip_1} | ${prefix_length}
-| | And VPP Interface Set IP Address | ${dut_node}
-| | ... | ${dut_to_tg_if1} | ${ip_2} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${neighbor_1_ip} | ${neighbor_1_mac}
-| | And VPP Add IP Neighbor
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${neighbor_2_ip} | ${neighbor_2_mac}
-| | When Vpp Route Add | ${dut_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${neighbor_1_ip} | interface=${dut_to_tg_if1}
-| | ... | multipath=${TRUE}
-| | And Vpp Route Add | ${dut_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${neighbor_2_ip} | interface=${dut_to_tg_if1}
-| | ... | multipath=${TRUE}
-| | Then Send packets and verify multipath routing | ${tg_node}
-| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1} | ${test_src_ip} | ${test_dst_ip}
-| | ... | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} | ${dut_to_tg_if1_mac}
-| | ... | ${neighbor_1_mac} | ${neighbor_2_mac}
diff --git a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-rpf-func.robot b/tests/vpp/func/ip4/eth2p-ethip4-ip4base-rpf-func.robot
deleted file mode 100644
index c98a05b344..0000000000
--- a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-rpf-func.robot
+++ /dev/null
@@ -1,144 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.IPUtil
-| Library | resources.libraries.python.Trace
-| ...
-| Resource | resources/libraries/robot/ip/ip4.robot
-| Resource | resources/libraries/robot/l2/l2_xconnect.robot
-| Resource | resources/libraries/robot/shared/counters.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| ...
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down functional test
-| ...
-| Documentation | *Source RPF check on IPv4 test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG - DUT1 - DUT2 - TG
-| ... |        with one link between the nodes.
-| ... | *[Cfg] DUT configuration:* DUT2 is configured with L2 Cross connect.
-| ... |        DUT1 is configured with IP source check on link to TG,
-| ... | *[Ver] TG verification:* Test ICMP Echo Request packets are sent
-| ... |        in one direction by TG on link to DUT1 and received on TG link
-| ... |        to DUT2. On receive TG verifies if packets which source address
-| ... |        is not in routes are dropped.
-
-*** Variables ***
-| ${dut1_to_tg_ip}= | 192.168.1.1
-| ${dut1_to_tg_ip_GW}= | 192.168.1.2
-| ${dut1_to_dut2_ip}= | 192.168.2.1
-| ${dut1_to_dut2_ip_GW}= | 192.168.2.2
-| ${test_dst_ip}= | 32.0.0.1
-| ${pass_test_src_ip}= | 16.0.0.1
-| ${drop_test_src_ip}= | 24.0.0.1
-| ${prefix_length}= | 24
-
-*** Test Cases ***
-| TC01: VPP source RPF check on IPv4 src-addr
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG
-| | ... | [Cfg] On DUT1 setup IP source check.
-| | ... | [Ver] Make TG verify matching packets which source address
-| | ... | is not in routes are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | ... | resolve_attempts=${NONE}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip_GW}
-| | ... | ${tg_to_dut1_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${pass_test_src_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_tg_ip_GW} | interface=${dut1_to_tg}
-| | ... | resolve_attempts=${NONE}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send packet and verify headers | ${tg_node}
-| | ... | ${pass_test_src_ip} | ${test_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers | ${tg_node}
-| | ... | ${drop_test_src_ip} | ${test_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | ${dut1_to_tg_name}= | Get Interface Name | ${dut1_node} | ${dut1_to_tg}
-| | When VPP IP Source Check Setup | ${dut1_node} | ${dut1_to_tg_name}
-| | Then Send packet and verify headers | ${tg_node}
-| | ... | ${pass_test_src_ip} | ${test_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers | ${tg_node}
-| | ... | ${dut1_to_tg_ip_GW} | ${test_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Packet transmission from port to port should fail | ${tg_node}
-| | ... | ${drop_test_src_ip} | ${test_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-
-| TC02: VPP pass traffic on non-enabled RPF interface
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG
-| | ... | [Cfg] On DUT1 setup IP source check.
-| | ... | [Ver] Make TG verify matching packets on non-enabled RPF interface
-| | ... | are passed.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | ... | resolve_attempts=${NONE}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip_GW}
-| | ... | ${tg_to_dut1_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${pass_test_src_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_tg_ip_GW} | interface=${dut1_to_tg}
-| | ... | resolve_attempts=${NONE}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | ${dut1_to_tg_name}= | Get Interface Name | ${dut1_node} | ${dut1_to_tg}
-| | When VPP IP Source Check Setup | ${dut1_node} | ${dut1_to_tg_name}
-| | Then Send packet and verify headers | ${tg_node}
-| | ... | ${test_dst_ip} | ${pass_test_src_ip} | ${tg_to_dut2}
-| | ... | ${tg_to_dut2_mac} | ${dut1_to_dut2_mac} | ${tg_to_dut1}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-| | And Send packet and verify headers | ${tg_node}
-| | ... | ${test_dst_ip} | ${dut1_to_tg_ip_GW} | ${tg_to_dut2}
-| | ... | ${tg_to_dut2_mac} | ${dut1_to_dut2_mac} | ${tg_to_dut1}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
diff --git a/tests/vpp/func/ip4_tunnels/vxlan/eth4p-ethip4vxlan-l2bdbasemaclrn-l2shg-func.robot b/tests/vpp/func/ip4_tunnels/vxlan/eth4p-ethip4vxlan-l2bdbasemaclrn-l2shg-func.robot
deleted file mode 100644
index 8e868aa374..0000000000
--- a/tests/vpp/func/ip4_tunnels/vxlan/eth4p-ethip4vxlan-l2bdbasemaclrn-l2shg-func.robot
+++ /dev/null
@@ -1,191 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library  | resources.libraries.python.Trace
-| ...
-| Resource | resources/libraries/robot/l2/l2_traffic.robot
-| Resource | resources/libraries/robot/overlay/vxlan.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down functional test
-| ...
-| Documentation | *L2BD with SHG combined with VXLAN test cases - IPv4*
-| ...
-| ... | *[Top] Network topologies:* TG=DUT1=DUT2=TG 3-node circular topology
-| ... | with double parallel links.
-| ... | *[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on
-| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
-| ... | bridge-domain (L2BD) switching combined with MAC learning enabled
-| ... | and Split Horizon Groups (SHG); VXLAN tunnels are configured
-| ... | between L2BDs on DUT1 and DUT2.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent
-| ... | in both directions by TG on links to DUT1 and DUT2; on receive TG
-| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr
-| ... | and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC7348.
-
-*** Variables ***
-| ${vni_1}= | 23
-| ${vni_2}= | 35
-
-| ${bd_id1}= | 10
-| ${bd_id2}= | 20
-| ${bd_id3}= | 30
-| ${shg1}= | 1
-| ${shg2}= | 2
-
-| ${ip4_addr1}= | 172.16.0.1
-| ${ip4_addr2}= | 172.16.0.2
-| ${ip4_prefix}= | 24
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv4 tunnels in SHG switch ICMPv4 between TG links
-| | [Documentation]
-| | ... | [Top] TG=DUT1=DUT2=TG. [Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \
-| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 configure L2
-| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces
-| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN
-| | ... | interfaces into the same Split-Horizon-Group (SHG). On DUT2 configure
-| | ... | two L2 bridge-domain (MAC learning enabled), each with one untagged
-| | ... | interface to TG and one VXLAN interface towards the DUT1. [Ver] Make
-| | ... | TG send ICMPv4 Echo Reqs between all four of its interfaces to be
-| | ... | switched by DUT1 and DUT2; verify packets are not switched between
-| | ... | TG interfaces connected to DUT2 that are isolated by SHG on DUT1.
-| | ... | [Ref] RFC7348.
-| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO
-| | Given Configure path for 3-node BD-SHG test | ${nodes['TG']}
-| | ... | ${nodes['DUT1']} | ${nodes['DUT2']}
-| | And Set interfaces in 3-node BD-SHG test up
-| | And VPP Interface Set IP Address | ${dut1_node} | ${dut1_to_dut2}
-| | ... | ${ip4_addr1} | ${ip4_prefix}
-| | And VPP Interface Set IP Address | ${dut2_node} | ${dut2_to_dut1}
-| | ... | ${ip4_addr2} | ${ip4_prefix}
-| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr2}
-| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr1}
-| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1}
-| | | ... | ${ip4_addr1} | ${ip4_addr2}
-| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2}
-| | | ... | ${ip4_addr1} | ${ip4_addr2}
-| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1}
-| | | ... | ${ip4_addr2} | ${ip4_addr1}
-| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2}
-| | | ... | ${ip4_addr2} | ${ip4_addr1}
-| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up
-| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up
-| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up
-| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up
-| | And Vpp Node Interfaces Ready Wait | ${dut1_node}
-| | And Vpp Node Interfaces Ready Wait | ${dut2_node}
-| | And Create bridge domain | ${dut1_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg_if1}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg_if2}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1s_vxlan1}
-| | ... | ${bd_id1} | ${shg1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1s_vxlan2}
-| | ... | ${bd_id1} | ${shg1}
-| | And Create bridge domain | ${dut2_node} | ${bd_id2}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg_if1}
-| | ... | ${bd_id2}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2s_vxlan1}
-| | ... | ${bd_id2}
-| | And Create bridge domain | ${dut2_node} | ${bd_id3}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg_if2}
-| | ... | ${bd_id3}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2s_vxlan2}
-| | ... | ${bd_id3}
-| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node}
-| | ... | ${tg_to_dut1_if1} | ${tg_to_dut2_if1}
-| | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node}
-| | ... | ${tg_to_dut1_if1} | ${tg_to_dut2_if2}
-| | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node}
-| | ... | ${tg_to_dut1_if2} | ${tg_to_dut2_if1}
-| | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node}
-| | ... | ${tg_to_dut1_if2} | ${tg_to_dut2_if2}
-| | And Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMPv4 bidirectionally and verify received packets
-| | ... | ${tg_node} | ${tg_to_dut2_if1} | ${tg_to_dut2_if2}
-
-| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv4 tunnels in different SHGs switch ICMPv4 between TG links
-| | [Documentation]
-| | ... | [Top] TG=DUT1=DUT2=TG.[Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \
-| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 configure L2
-| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces
-| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN
-| | ... | interfaces into the different Split-Horizon-Group (SHGs). On DUT2
-| | ... | configure two L2 bridge-domain (MAC learning enabled), each with one
-| | ... | untagged interface to TG and one VXLAN interface towards the DUT1.
-| | ... | [Ver] Make TG send ICMPv4 Echo Req between all four of its interfaces
-| | ... | to be switched by DUT1 and DUT2; verify packets are switched between
-| | ... | all TG interfaces. [Ref] RFC7348.
-| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO
-| | Given Configure path for 3-node BD-SHG test | ${nodes['TG']}
-| | ... | ${nodes['DUT1']} | ${nodes['DUT2']}
-| | And Set interfaces in 3-node BD-SHG test up
-| | And VPP Interface Set IP Address | ${dut1_node} | ${dut1_to_dut2}
-| | ... | ${ip4_addr1} | ${ip4_prefix}
-| | And VPP Interface Set IP Address | ${dut2_node} | ${dut2_to_dut1}
-| | ... | ${ip4_addr2} | ${ip4_prefix}
-| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr2}
-| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr1}
-| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1}
-| | | ... | ${ip4_addr1} | ${ip4_addr2}
-| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2}
-| | | ... | ${ip4_addr1} | ${ip4_addr2}
-| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1}
-| | | ... | ${ip4_addr2} | ${ip4_addr1}
-| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2}
-| | | ... | ${ip4_addr2} | ${ip4_addr1}
-| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up
-| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up
-| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up
-| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up
-| | And Vpp Node Interfaces Ready Wait | ${dut1_node}
-| | And Vpp Node Interfaces Ready Wait | ${dut2_node}
-| | And Create bridge domain | ${dut1_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg_if1}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg_if2}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1s_vxlan1}
-| | ... | ${bd_id1} | ${shg1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1s_vxlan2}
-| | ... | ${bd_id1} | ${shg2}
-| | And Create bridge domain | ${dut2_node} | ${bd_id2}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg_if1}
-| | ... | ${bd_id2}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2s_vxlan1}
-| | ... | ${bd_id2}
-| | And Create bridge domain | ${dut2_node} | ${bd_id3}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg_if2}
-| | ... | ${bd_id3}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2s_vxlan2}
-| | ... | ${bd_id3}
-| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node}
-| | ... | ${tg_to_dut1_if1} | ${tg_to_dut2_if1}
-| | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node}
-| | ... | ${tg_to_dut1_if1} | ${tg_to_dut2_if2}
-| | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node}
-| | ... | ${tg_to_dut1_if2} | ${tg_to_dut2_if1}
-| | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node}
-| | ... | ${tg_to_dut1_if2} | ${tg_to_dut2_if2}
-| | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node}
-| | ... | ${tg_to_dut2_if1} | ${tg_to_dut2_if2}
diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ecmp-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ecmp-func.robot
deleted file mode 100644
index b970d37aef..0000000000
--- a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ecmp-func.robot
+++ /dev/null
@@ -1,81 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.IPUtil
-| Library | resources.libraries.python.Trace
-| ...
-| Resource | resources/libraries/robot/ip/ip6.robot
-| Resource | resources/libraries/robot/shared/counters.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| ...
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO | SKIP_VPP_PATCH
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down functional test
-| ...
-| Documentation | *Ipv6 Multipath routing test cases*
-| ...
-| ... | *[Top] Network topologies:* TG=DUT 2-node topology with two links\
-| ... | between nodes.
-| ... | *[Cfg] DUT configuration:* On DUT configure interfaces IPv4 adresses,\
-| ... | and multipath routing.
-| ... | *[Ver] TG verification:* Test packets are sent from TG on the first\
-| ... | link to DUT. Packet is received on TG on the second link from DUT1.
-
-*** Variables ***
-| ${ip_1}= | 3ffe:61::1
-| ${ip_2}= | 3ffe:62::1
-| ${test_dst_ip}= | 3ffe:71::1
-| ${test_src_ip}= | 3ffe:51::1
-| ${prefix_length}= | 64
-| ${neighbor_1_ip}= | 3ffe:62::2
-| ${neighbor_1_mac}= | 02:00:00:00:00:02
-| ${neighbor_2_ip}= | 3ffe:62::3
-| ${neighbor_2_mac}= | 02:00:00:00:00:03
-
-*** Test Cases ***
-| TC01: IPv6 Equal-cost multipath routing
-| | [Documentation]
-| | ... | [Top] TG=DUT
-| | ... | [Cfg] On DUT configure multipath routing wiht two equal-cost paths.
-| | ... | [Ver] TG sends 100 IPv6 ICMP packets traffic on the first link to\
-| | ... | DUT. On second link to TG verify if traffic is divided into two paths.
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Set interfaces in 2-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${ip_1} | ${prefix_length}
-| | And VPP Interface Set IP Address
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${ip_2} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${neighbor_1_ip} | ${neighbor_1_mac}
-| | And VPP Add IP Neighbor
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${neighbor_2_ip} | ${neighbor_2_mac}
-| | And Suppress ICMPv6 router advertisement message | ${nodes}
-| | When Vpp Route Add
-| | ... | ${dut_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${neighbor_1_ip} | interface=${dut_to_tg_if1}
-| | ... | multipath=${TRUE}
-| | And Vpp Route Add
-| | ... | ${dut_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${neighbor_2_ip} | interface=${dut_to_tg_if1}
-| | ... | multipath=${TRUE}
-| | Then Send packets and verify multipath routing
-| | ... | ${tg_node} | ${tg_to_dut_if2} | ${tg_to_dut_if1} | ${test_src_ip}
-| | ... | ${test_dst_ip} | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac}
-| | ... | ${dut_to_tg_if1_mac} | ${neighbor_1_mac} | ${neighbor_2_mac}
diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ra-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ra-func.robot
deleted file mode 100644
index 267faac50f..0000000000
--- a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ra-func.robot
+++ /dev/null
@@ -1,112 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.Trace
-| ...
-| Resource | resources/libraries/robot/ip/ip6.robot
-| Resource | resources/libraries/robot/shared/counters.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| ...
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | SKIP_VPP_PATCH
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down functional test
-| ...
-| Documentation | *IPv6 Router Advertisement test cases*
-| ...
-| ... | RFC4861 Neighbor Discovery. Encapsulations: Eth-IPv6-RA on links
-| ... | TG-DUT1. IPv6 Router Advertisement tests use 3-node topology TG - DUT1 -
-| ... | DUT2 - TG with one link between the nodes. DUT1 and DUT2 are configured
-| ... | with IPv6 routing and static routes. TG verifies received RA packets.
-
-
-*** Variables ***
-| ${dut1_to_tg_ip}= | 3ffe:62::1
-| ${tg_to_dut1_ip}= | 3ffe:62::2
-| ${prefix_length}= | 64
-| ${interval}= | 2
-
-*** Test Cases ***
-| TC01: DUT transmits RA on IPv6 enabled interface
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG.
-| | ... | [Ver] Make TG wait for IPv6 Router Advertisement packet to be sent\
-| | ... | by DUT1 and verify the received RA packet is correct.
-| | [Tags] | EXPECTED_FAILING
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | When Vpp RA Send After Interval | ${dut1_node} | ${dut1_to_tg}
-| | Then Receive and verify router advertisement packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${dut1_to_tg_mac}
-
-| TC02: DUT retransmits RA on IPv6 enabled interface after a set interval
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG.
-| | ... | [Ver] Make TG wait for two IPv6 Router Advertisement packets\
-| | ... | to be sent by DUT1 and verify the received RA packets are correct.
-| | [Tags] | EXPECTED_FAILING
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | When Vpp RA Send After Interval | ${dut1_node} | ${dut1_to_tg}
-| | ... | interval=${interval}
-| | :FOR | ${n} | IN RANGE | ${2}
-| | | Then Receive and verify router advertisement packet
-| | | ... | ${tg_node} | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${interval}
-
-| TC03: DUT responds to Router Solicitation request
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG and suppress\
-| | ... | sending of Router Advertisement packets periodically.
-| | ... | [Ver] Make TG send IPv6 Router Solicitation request to DUT1, listen\
-| | ... | for response from DUT1 and verify the received RA packet is correct.
-| | [Tags] | EXPECTED_FAILING
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | When VPP RA Suppress Link Layer | ${dut1_node} | ${dut1_to_tg}
-| | Then Send router solicitation and verify response
-| | ... | ${tg_node} | ${dut1_node} | ${tg_to_dut1} | ${dut1_to_tg}
-| | ... | ${tg_to_dut1_ip}
-
-| TC04: DUT responds to Router Solicitation request sent from link local address
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG and suppress\
-| | ... | sending of Router Advertisement packets periodically.
-| | ... | [Ver] Make TG send IPv6 Router Solicitation request to DUT1, listen\
-| | ... | for response from DUT1 and verify the received RA packet is correct.
-| | [Tags] | EXPECTED_FAILING
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | When VPP RA Suppress Link Layer | ${dut1_node} | ${dut1_to_tg}
-| | Then Send router solicitation and verify response
-| | ... | ${tg_node} | ${dut1_node} | ${tg_to_dut1} | ${dut1_to_tg}
diff --git a/tests/vpp/func/ip6_tunnels/vxlan/eth4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func.robot b/tests/vpp/func/ip6_tunnels/vxlan/eth4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func.robot
deleted file mode 100644
index 715f9ed79a..0000000000
--- a/tests/vpp/func/ip6_tunnels/vxlan/eth4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func.robot
+++ /dev/null
@@ -1,194 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library  | resources.libraries.python.IPUtil
-| Library  | resources.libraries.python.Trace
-| ...
-| Resource | resources/libraries/robot/l2/l2_traffic.robot
-| Resource | resources/libraries/robot/overlay/vxlan.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down functional test
-| ...
-| Documentation | *L2BD with SHG combined with VXLAN test cases - IPv6*
-| ...
-| ... | *[Top] Network topologies:* TG=DUT1=DUT2=TG 3-node circular topology
-| ... | with double parallel links.
-| ... | *[Enc] Packet encapsulations:* th-IPv6-VXLAN-Eth-IPv6-ICMPv6 on
-| ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for L2 switching of IPv6.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
-| ... | bridge-domain (L2BD) switching combined with MAC learning enabled
-| ... | and Split Horizon Groups (SHG); VXLAN tunnels are configured
-| ... | between L2BDs on DUT1 and DUT2.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent
-| ... | in both directions by TG on links to DUT1 and DUT2; on receive TG
-| ... | verifies packets for correctness and their IPv6 src-addr, dst-addr
-| ... | and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC7348.
-
-*** Variables ***
-| ${vni_1}= | 23
-| ${vni_2}= | 35
-
-| ${bd_id1}= | 10
-| ${bd_id2}= | 20
-| ${bd_id3}= | 30
-| ${shg1}= | 1
-| ${shg2}= | 2
-
-| ${ip6_addr1}= | 3ffe:64::1
-| ${ip6_addr2}= | 3ffe:64::2
-| ${ip6_prefix}= | 64
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels in SHG switch ICMPv6 between TG links
-| | [Documentation]
-| | ... | [Top] TG=DUT1=DUT2=TG. [Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \
-| | ... | DUT1-DUT2; Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 configure L2
-| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces
-| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN
-| | ... | interfaces into the same Split-Horizon-Group (SHG). On DUT2 configure
-| | ... | two L2 bridge-domain (MAC learning enabled), each with one untagged
-| | ... | interface to TG and one VXLAN interface towards the DUT1. [Ver] Make
-| | ... | TG send ICMPv6 Echo Reqs between all four of its interfaces to be
-| | ... | switched by DUT1 and DUT2; verify packets are not switched between
-| | ... | TG interfaces connected to DUT2 that are isolated by SHG on DUT1.
-| | ... | [Ref] RFC7348.
-| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO
-| | Given Configure path for 3-node BD-SHG test
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']}
-| | And Set interfaces in 3-node BD-SHG test up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1} | ${ip6_prefix}
-| | And VPP Interface Set IP Address
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2} | ${ip6_prefix}
-| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2}
-| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1}
-| | And Vpp All RA Suppress Link Layer | ${nodes}
-| | ${dut1s_vxlan1}= | When Create VXLAN interface
-| | | ... | ${dut1_node} | ${vni_1} | ${ip6_addr1} | ${ip6_addr2}
-| | ${dut1s_vxlan2}= | And Create VXLAN interface
-| | | ... | ${dut1_node} | ${vni_2} | ${ip6_addr1} | ${ip6_addr2}
-| | ${dut2s_vxlan1}= | And Create VXLAN interface
-| | | ... | ${dut2_node} | ${vni_1} | ${ip6_addr2} | ${ip6_addr1}
-| | ${dut2s_vxlan2}= | And Create VXLAN interface
-| | | ... | ${dut2_node} | ${vni_2} | ${ip6_addr2} | ${ip6_addr1}
-| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up
-| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up
-| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up
-| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up
-| | And Vpp Node Interfaces Ready Wait | ${dut1_node}
-| | And Vpp Node Interfaces Ready Wait | ${dut2_node}
-| | And Create bridge domain | ${dut1_node} | ${bd_id1}
-| | And Add interface to bridge domain
-| | ... | ${dut1_node} | ${dut1_to_tg_if1} | ${bd_id1}
-| | And Add interface to bridge domain
-| | ... | ${dut1_node} | ${dut1_to_tg_if2} | ${bd_id1}
-| | And Add interface to bridge domain
-| | ... | ${dut1_node} | ${dut1s_vxlan1} | ${bd_id1} | ${shg1}
-| | And Add interface to bridge domain
-| | ... | ${dut1_node} | ${dut1s_vxlan2} | ${bd_id1} | ${shg1}
-| | And Create bridge domain | ${dut2_node} | ${bd_id2}
-| | And Add interface to bridge domain
-| | ... | ${dut2_node} | ${dut2_to_tg_if1} | ${bd_id2}
-| | And Add interface to bridge domain
-| | ... | ${dut2_node} | ${dut2s_vxlan1} | ${bd_id2}
-| | And Create bridge domain | ${dut2_node} | ${bd_id3}
-| | And Add interface to bridge domain
-| | ... | ${dut2_node} | ${dut2_to_tg_if2} | ${bd_id3}
-| | And Add interface to bridge domain
-| | ... | ${dut2_node} | ${dut2s_vxlan2} | ${bd_id3}
-| | Then Send ICMPv6 bidirectionally and verify received packets
-| | ... | ${tg_node} | ${tg_to_dut1_if1} | ${tg_to_dut2_if1}
-| | And Send ICMPv6 bidirectionally and verify received packets
-| | ... | ${tg_node} | ${tg_to_dut1_if1} | ${tg_to_dut2_if2}
-| | And Send ICMPv6 bidirectionally and verify received packets
-| | ... | ${tg_node} | ${tg_to_dut1_if2} | ${tg_to_dut2_if1}
-| | And Send ICMPv6 bidirectionally and verify received packets
-| | ... | ${tg_node} | ${tg_to_dut1_if2} | ${tg_to_dut2_if2}
-| | And Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMPv6 bidirectionally and verify received packets
-| | ... | ${tg_node} | ${tg_to_dut2_if1} | ${tg_to_dut2_if2}
-
-| TC02: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels in different SHGs switch ICMPv6 between TG links
-| | [Documentation]
-| | ... | [Top] TG=DUT1=DUT2=TG.[Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \
-| | ... | DUT1-DUT2; Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 configure L2
-| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces
-| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN
-| | ... | interfaces into the different Split-Horizon-Group (SHGs). On DUT2
-| | ... | configure two L2 bridge-domain (MAC learning enabled), each with one
-| | ... | untagged interface to TG and one VXLAN interface towards the DUT1.
-| | ... | [Ver] Make TG send ICMPv6 Echo Req between all four of its interfaces
-| | ... | to be switched by DUT1 and DUT2; verify packets are switched between
-| | ... | all TG interfaces. [Ref] RFC7348.
-| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO
-| | Given Configure path for 3-node BD-SHG test
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']}
-| | And Set interfaces in 3-node BD-SHG test up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1} | ${ip6_prefix}
-| | And VPP Interface Set IP Address
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2} | ${ip6_prefix}
-| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2}
-| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1}
-| | And Vpp All RA Suppress Link Layer | ${nodes}
-| | ${dut1s_vxlan1}= | When Create VXLAN interface
-| | ... | ${dut1_node} | ${vni_1} | ${ip6_addr1} | ${ip6_addr2}
-| | ${dut1s_vxlan2}= | And Create VXLAN interface
-| | ... | ${dut1_node} | ${vni_2} | ${ip6_addr1} | ${ip6_addr2}
-| | ${dut2s_vxlan1}= | And Create VXLAN interface
-| | ... | ${dut2_node} | ${vni_1} | ${ip6_addr2} | ${ip6_addr1}
-| | ${dut2s_vxlan2}= | And Create VXLAN interface
-| | | ... | ${dut2_node} | ${vni_2} | ${ip6_addr2} | ${ip6_addr1}
-| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up
-| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up
-| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up
-| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up
-| | And Vpp Node Interfaces Ready Wait | ${dut1_node}
-| | And Vpp Node Interfaces Ready Wait | ${dut2_node}
-| | And Create bridge domain | ${dut1_node} | ${bd_id1}
-| | And Add interface to bridge domain
-| | ... | ${dut1_node} | ${dut1_to_tg_if1} | ${bd_id1}
-| | And Add interface to bridge domain
-| | ... | ${dut1_node} | ${dut1_to_tg_if2} | ${bd_id1}
-| | And Add interface to bridge domain
-| | ... | ${dut1_node} | ${dut1s_vxlan1} | ${bd_id1} | ${shg1}
-| | And Add interface to bridge domain
-| | ... | ${dut1_node} | ${dut1s_vxlan2} | ${bd_id1} | ${shg2}
-| | And Create bridge domain | ${dut2_node} | ${bd_id2}
-| | And Add interface to bridge domain
-| | ... | ${dut2_node} | ${dut2_to_tg_if1} | ${bd_id2}
-| | And Add interface to bridge domain
-| | ... | ${dut2_node} | ${dut2s_vxlan1} | ${bd_id2}
-| | And Create bridge domain | ${dut2_node} | ${bd_id3}
-| | And Add interface to bridge domain
-| | ... | ${dut2_node} | ${dut2_to_tg_if2} | ${bd_id3}
-| | And Add interface to bridge domain
-| | ... | ${dut2_node} | ${dut2s_vxlan2} | ${bd_id3}
-| | Then Send ICMPv6 bidirectionally and verify received packets
-| | ... | ${tg_node} | ${tg_to_dut1_if1} | ${tg_to_dut2_if1}
-| | And Send ICMPv6 bidirectionally and verify received packets
-| | ... | ${tg_node} | ${tg_to_dut1_if1} | ${tg_to_dut2_if2}
-| | And Send ICMPv6 bidirectionally and verify received packets
-| | ... | ${tg_node} | ${tg_to_dut1_if2} | ${tg_to_dut2_if1}
-| | And Send ICMPv6 bidirectionally and verify received packets
-| | ... | ${tg_node} | ${tg_to_dut1_if2} | ${tg_to_dut2_if2}
-| | And Send ICMPv6 bidirectionally and verify received packets
-| | ... | ${tg_node} | ${tg_to_dut2_if1} | ${tg_to_dut2_if2}