FIX: IPSec tunnel interface

- add following line per interface tunnel:
  set int unnum <ipsec> use <interface>

Change-Id: Iff75f27b7cf25f3d24eea92366b1fd4a718c253b
Signed-off-by: Jan Gelety <jgelety@cisco.com>

4 files changed, 96 insertions, 96 deletions

diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdrdisc.robot
index 6b9333c2b8..934f260c74 100644
--- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdrdisc.robot
+++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdrdisc.robot
@@ -99,9 +99,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find NDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -133,9 +133,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find PDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -168,9 +168,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find NDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -202,9 +202,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find PDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -239,9 +239,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find NDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -275,9 +275,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find PDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -310,9 +310,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find NDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -344,9 +344,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find PDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot
index f98fe78c16..dab9734ca0 100644
--- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot
+++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot
@@ -99,9 +99,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find NDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -133,9 +133,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find PDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -167,9 +167,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find NDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -200,9 +200,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find PDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -236,9 +236,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find NDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -271,9 +271,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find PDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -306,9 +306,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find NDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -340,9 +340,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find PDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdrdisc.robot
index d5bb8aba40..cd56ceb462 100644
--- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdrdisc.robot
+++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdrdisc.robot
@@ -99,9 +99,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find NDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -133,9 +133,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find PDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -168,9 +168,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find NDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -202,9 +202,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find PDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -239,9 +239,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find NDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -275,9 +275,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find PDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -310,9 +310,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find NDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -344,9 +344,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find PDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot
index 6f9263ad02..80967e706c 100644
--- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot
+++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot
@@ -99,9 +99,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find NDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -133,9 +133,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find PDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -167,9 +167,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find NDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -200,9 +200,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find PDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -236,9 +236,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find NDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -271,9 +271,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find PDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -306,9 +306,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find NDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -340,9 +340,9 @@
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPSec in 3-node circular topology
 | | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4}
-| | ... | ${raddr_ip4} | ${addr_range}
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
 | | Then Find PDR using binary search and pps | ${framesize}
 | | ... | ${binary_min} | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}