diff options
| author |   juraj.linkes <juraj.linkes@pantheon.tech> | 2019-03-07 14:03:36 +0100 |
|---|---|---|
| committer |   Vratko Polak <vrpolak@cisco.com> | 2019-04-05 13:58:53 +0000 |
| commit | 6e96fee163eb9622bf39ed48743db86f7bcf743a (patch) | |
| tree | 89266ca35da7258c80d8c410e09b5ab5112fe7c1 /tests/vpp | |
| parent | 90236e8fa69f5a226edd75a7c67f49e6d4383aaf (diff) | |
Fixes for Taishan testbed
* rename NICs in Taishan testbed to Intel-X520-DA2
* fix testbed NIC selection
* remove unnecessary 82599es tests
* blacklist unsupported tests on Taishan testbed
* lowercase previously created bash local variables
Change-Id: I3b7f59e2edc00929fab2f5a0fce483f236f83075
Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
Diffstat (limited to 'tests/vpp')
44 files changed, 0 insertions, 6021 deletions
diff --git a/tests/vpp/perf/ip4/10ge2p1x82599es-dot1q-ip4base-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x82599es-dot1q-ip4base-mrr.robot deleted file mode 100644 index dc09f00233..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x82599es-dot1q-ip4base-mrr.robot +++ /dev/null @@ -1,134 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-82599ES | ETH | IP4FWD | BASE | DOT1Q | IP4BASE -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-82599ES -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results IPv4 routing with IEEE 802.1Q test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. IEEE 802.1Q\ -| ... | tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and two static IPv4 /30 route entries. DUT1 and DUT2 tested\ -| ... | with 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic\ -| ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ -| ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| ${subid}= | 10 -| ${tag_rewrite}= | pop-1 -| ${overhead}= | ${4} -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -# TG subnets used by T-Rex -| ${tg_if1_net}= | 10.10.10.0 -| ${tg_if2_net}= | 20.20.20.0 -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] Each DUT runs IPv4 routing with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${overhead} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv4 forwarding with VLAN dot1q sub-interfaces in circular topology -| | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-dot1q-ip4base-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-dot1q-ip4base-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-dot1q-ip4base-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-dot1q-ip4base-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-dot1q-ip4base-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-dot1q-ip4base-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-dot1q-ip4base-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-dot1q-ip4base-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-dot1q-ip4base-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-dot1q-ip4base-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-dot1q-ip4base-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-dot1q-ip4base-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/10ge2p1x82599es-dot1q-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x82599es-dot1q-ip4base-ndrpdr.robot deleted file mode 100644 index 2b65609d7b..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x82599es-dot1q-ip4base-ndrpdr.robot +++ /dev/null @@ -1,141 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-82599ES | ETH | IP4FWD | BASE | DOT1Q | IP4BASE -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-82599ES -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput IPv4 routing with IEEE 802.1Q test\ -| ... | cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. IEEE 802.1Q\ -| ... | tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and two static IPv4 /30 route entries. DUT1 and DUT2 tested\ -| ... | with 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library. Test packets are\ -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\ -| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP\ -| ... | protocol=61 and static payload. MAC addresses are matching MAC\ -| ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| ${subid}= | 10 -| ${tag_rewrite}= | pop-1 -| ${overhead}= | ${4} -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -# TG subnets used by T-Rex -| ${tg_if1_net}= | 10.10.10.0 -| ${tg_if2_net}= | 20.20.20.0 -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] Each DUT runs IPv4 routing with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${overhead} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv4 forwarding with VLAN dot1q sub-interfaces in circular topology -| | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite} -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-dot1q-ip4base-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-dot1q-ip4base-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-dot1q-ip4base-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-dot1q-ip4base-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-dot1q-ip4base-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-dot1q-ip4base-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-dot1q-ip4base-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-dot1q-ip4base-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-dot1q-ip4base-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-dot1q-ip4base-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-dot1q-ip4base-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-dot1q-ip4base-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4base-copwhtlistbase-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4base-copwhtlistbase-mrr.robot deleted file mode 100644 index 7deca2a14b..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4base-copwhtlistbase-mrr.robot +++ /dev/null @@ -1,136 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Library | resources.libraries.python.Cop -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-82599ES | ETH | IP4FWD | FEATURE | COPWHLIST -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-82599ES -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results IPv4 whitelist test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing, two static IPv4 /24 routes and IPv4 COP security whitelist -| ... | ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG. -| ... | DUT1 and DUT2 tested with 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 - -*** Keywords *** -| Local Template -| | ... -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv4 forwarding in circular topology -| | And Add Fib Table | ${dut1} | 1 -| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} -| | And Add Fib Table | ${dut2} | 1 -| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4-ip4base-copwhtlistbase-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4-ip4base-copwhtlistbase-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4-ip4base-copwhtlistbase-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4-ip4base-copwhtlistbase-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4-ip4base-copwhtlistbase-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4-ip4base-copwhtlistbase-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4-ip4base-copwhtlistbase-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4-ip4base-copwhtlistbase-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4-ip4base-copwhtlistbase-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4-ip4base-copwhtlistbase-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4-ip4base-copwhtlistbase-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4-ip4base-copwhtlistbase-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4base-copwhtlistbase-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4base-copwhtlistbase-ndrpdr.robot deleted file mode 100644 index 73ccee2c76..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4base-copwhtlistbase-ndrpdr.robot +++ /dev/null @@ -1,142 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Library | resources.libraries.python.Cop -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-82599ES | ETH | IP4FWD | FEATURE | COPWHLIST -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-82599ES -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput IPv4 whitelist test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing, two static IPv4 /24 routes and IPv4 COP security whitelist -| ... | ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG. -| ... | DUT1 and DUT2 tested with 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 - -*** Keywords *** -| Local Template -| | ... -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv4 forwarding in circular topology -| | And Add Fib Table | ${dut1} | 1 -| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} -| | And Add Fib Table | ${dut2} | 1 -| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4base-ipolicemarkbase-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4base-ipolicemarkbase-mrr.robot deleted file mode 100644 index 7df1bcd994..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4base-ipolicemarkbase-mrr.robot +++ /dev/null @@ -1,134 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Library | resources.libraries.python.Policer -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-82599ES | IP4FWD | FEATURE | POLICE_MARK -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-82599ES -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results IPv4 policer test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing and two static IPv4 /24 route entries and policer with 2R3C -| ... | color-aware configuration. Policer is applied on links TG - DUT1 and -| ... | DUT2 - TG. DUT1 and DUT2 tested with 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ -| ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv6 header -| ... | and generated payload. MAC addresses are matching MAC addresses -| ... | of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC2698. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -| ${cir}= | ${100} -| ${eir}= | ${150} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 - -*** Keywords *** -| Local Template -| | ... -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv4 forwarding in circular topology -| | And Initialize IPv4 policer 2r3c-'ca' in circular topology -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot deleted file mode 100644 index 49f1ea5d14..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot +++ /dev/null @@ -1,139 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Library | resources.libraries.python.Policer -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-82599ES | IP4FWD | FEATURE | POLICE_MARK -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-82599ES -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput IPv4 policer test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing and two static IPv4 /24 route entries and policer with 2R3C -| ... | color-aware configuration. Policer is applied on links TG - DUT1 and -| ... | DUT2 - TG. DUT1 and DUT2 tested with 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv6 header -| ... | and generated payload. MAC addresses are matching MAC addresses -| ... | of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC2698. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -| ${cir}= | ${100} -| ${eir}= | ${150} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 - -*** Keywords *** -| Local Template -| | ... -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv4 forwarding in circular topology -| | And Initialize IPv4 policer 2r3c-'ca' in circular topology -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-ethip4-ip4base-ipolicemarkbase-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4-ip4base-ipolicemarkbase-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4-ip4base-ipolicemarkbase-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4-ip4base-ipolicemarkbase-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4-ip4base-ipolicemarkbase-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4-ip4base-ipolicemarkbase-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4-ip4base-ipolicemarkbase-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4-ip4base-ipolicemarkbase-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4-ip4base-ipolicemarkbase-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4-ip4base-ipolicemarkbase-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4-ip4base-ipolicemarkbase-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4-ip4base-ipolicemarkbase-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4base-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4base-mrr.robot deleted file mode 100644 index a318298a7a..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4base-mrr.robot +++ /dev/null @@ -1,125 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-82599ES | ETH | IP4FWD | BASE | IP4BASE -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-82599ES -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results IPv4 routing test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing and two static IPv4 /24 route entries. DUT1 and DUT2 tested with -| ... | 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 - -*** Keywords *** -| Local Template -| | ... -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv4 forwarding in circular topology -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4-ip4base-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4-ip4base-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4-ip4base-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4-ip4base-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4-ip4base-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4-ip4base-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4-ip4base-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4-ip4base-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4-ip4base-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4-ip4base-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4-ip4base-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4-ip4base-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4base-ndrpdr.robot deleted file mode 100644 index 0faaa2f378..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4base-ndrpdr.robot +++ /dev/null @@ -1,131 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-82599ES | ETH | IP4FWD | BASE | IP4BASE -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-82599ES -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing and two static IPv4 /24 route entries. DUT1 and DUT2 tested with -| ... | 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 - -*** Keywords *** -| Local Template -| | ... -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv4 forwarding in circular topology -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-ethip4-ip4base-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4-ip4base-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4-ip4base-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4-ip4base-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4-ip4base-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4-ip4base-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4-ip4base-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4-ip4base-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4-ip4base-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4-ip4base-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4-ip4base-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4-ip4base-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4scale200k-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4scale200k-mrr.robot deleted file mode 100644 index 9a44555ecc..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4scale200k-mrr.robot +++ /dev/null @@ -1,128 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-82599ES | ETH | IP4FWD | SCALE | FIB_200K -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-82599ES -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results IPv4 routing test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and 2x100k static IPv4 /32 route entries. DUT1 and DUT2 tested\ -| ... | with 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic\ -| ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ -| ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -| ${rts_per_flow}= | ${100000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${rts_per_flow} - -*** Keywords *** -| Local Template -| | ... -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv4 forwarding with scaling in circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4-ip4scale200k-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4-ip4scale200k-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4-ip4scale200k-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4-ip4scale200k-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4-ip4scale200k-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4-ip4scale200k-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4-ip4scale200k-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4-ip4scale200k-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4-ip4scale200k-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4-ip4scale200k-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4-ip4scale200k-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4-ip4scale200k-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4scale200k-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4scale200k-ndrpdr.robot deleted file mode 100644 index 86ef486c5b..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4scale200k-ndrpdr.robot +++ /dev/null @@ -1,134 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-82599ES | ETH | IP4FWD | SCALE | FIB_200K -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-82599ES -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and 2x100k static IPv4 /32 route entries. DUT1 and DUT2 tested\ -| ... | with 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ -| ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -| ${rts_per_flow}= | ${100000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${rts_per_flow} - -*** Keywords *** -| Local Template -| | ... -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv4 forwarding with scaling in circular topology -| | ... | ${rts_per_flow} -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-ethip4-ip4scale200k-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4-ip4scale200k-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4-ip4scale200k-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4-ip4scale200k-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4-ip4scale200k-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4-ip4scale200k-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4-ip4scale200k-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4-ip4scale200k-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4-ip4scale200k-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4-ip4scale200k-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4-ip4scale200k-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4-ip4scale200k-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4scale20k-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4scale20k-mrr.robot deleted file mode 100644 index 797e2a4b21..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4scale20k-mrr.robot +++ /dev/null @@ -1,128 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-82599ES | ETH | IP4FWD | SCALE | FIB_20K -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-82599ES -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results IPv4 routing test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and 2x10k static IPv4 /32 route entries. DUT1 and DUT2 tested\ -| ... | with 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic\ -| ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ -| ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -| ${rts_per_flow}= | ${10000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${rts_per_flow} - -*** Keywords *** -| Local Template -| | ... -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv4 forwarding with scaling in circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4-ip4scale20k-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4-ip4scale20k-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4-ip4scale20k-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4-ip4scale20k-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4-ip4scale20k-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4-ip4scale20k-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4-ip4scale20k-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4-ip4scale20k-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4-ip4scale20k-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4-ip4scale20k-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4-ip4scale20k-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4-ip4scale20k-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4scale20k-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4scale20k-ndrpdr.robot deleted file mode 100644 index 97dbaa1b75..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4scale20k-ndrpdr.robot +++ /dev/null @@ -1,134 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-82599ES | ETH | IP4FWD | SCALE | FIB_20K -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-82599ES -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and 2x10k static IPv4 /32 route entries. DUT1 and DUT2 tested\ -| ... | with 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ -| ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -| ${rts_per_flow}= | ${10000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${rts_per_flow} - -*** Keywords *** -| Local Template -| | ... -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv4 forwarding with scaling in circular topology -| | ... | ${rts_per_flow} -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-ethip4-ip4scale20k-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4-ip4scale20k-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4-ip4scale20k-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4-ip4scale20k-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4-ip4scale20k-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4-ip4scale20k-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4-ip4scale20k-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4-ip4scale20k-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4-ip4scale20k-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4-ip4scale20k-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4-ip4scale20k-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4-ip4scale20k-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4scale2m-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4scale2m-mrr.robot deleted file mode 100644 index 9e55382739..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4scale2m-mrr.robot +++ /dev/null @@ -1,128 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-82599ES | ETH | IP4FWD | SCALE | FIB_2M -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-82599ES -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results IPv4 routing test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and 2x1M static IPv4 /32 route entries. DUT1 and DUT2 tested\ -| ... | with 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic\ -| ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ -| ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -| ${rts_per_flow}= | ${1000000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${rts_per_flow} - -*** Keywords *** -| Local Template -| | ... -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv4 forwarding with scaling in circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4-ip4scale2m-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4-ip4scale2m-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4-ip4scale2m-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4-ip4scale2m-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4-ip4scale2m-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4-ip4scale2m-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4-ip4scale2m-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4-ip4scale2m-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4-ip4scale2m-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4-ip4scale2m-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4-ip4scale2m-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4-ip4scale2m-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4scale2m-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4scale2m-ndrpdr.robot deleted file mode 100644 index 9c11f1f3f0..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4-ip4scale2m-ndrpdr.robot +++ /dev/null @@ -1,134 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-82599ES | ETH | IP4FWD | SCALE | FIB_2M -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-82599ES -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and 2x1M static IPv4 /32 route entries. DUT1 and DUT2 tested\ -| ... | with 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ -| ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -| ${rts_per_flow}= | ${1000000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${rts_per_flow} - -*** Keywords *** -| Local Template -| | ... -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv4 forwarding with scaling in circular topology -| | ... | ${rts_per_flow} -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-ethip4-ip4scale2m-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4-ip4scale2m-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4-ip4scale2m-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4-ip4scale2m-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4-ip4scale2m-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4-ip4scale2m-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4-ip4scale2m-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4-ip4scale2m-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4-ip4scale2m-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4-ip4scale2m-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4-ip4scale2m-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4-ip4scale2m-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4udp-ip4base-iacl50sf-10kflows-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4udp-ip4base-iacl50sf-10kflows-mrr.robot deleted file mode 100644 index 749f11a813..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4udp-ip4base-iacl50sf-10kflows-mrr.robot +++ /dev/null @@ -1,147 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-82599ES | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL -| ... | IACL | ACL50 | 10k_FLOWS -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | Intel-82599ES -| ... | AND | Set up performance test suite with ACL -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results IPv4 test cases with ACL* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with 2p10GE NIC 82599ES Niantic by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic\ -| ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} - -# ACL test setup -| ${acl_action}= | permit+reflect -| ${acl_apply_type}= | input -| ${no_hit_aces_number}= | 50 -| ${flows_per_dir}= | 10k - -# starting points for non-hitting ACLs -| ${src_ip_start}= | 30.30.30.1 -| ${dst_ip_start}= | 40.40.40.1 -| ${ip_step}= | ${1} -| ${sport_start}= | ${1000} -| ${dport_start}= | ${1000} -| ${port_step}= | ${1} -| ${trex_stream1_subnet}= | 10.10.10.0/24 -| ${trex_stream2_subnet}= | 20.20.20.0/24 - -| ${traffic_profile}= | trex-sl-3n-ethip4udp-10u1000p-conc - -*** Keywords *** -| Local Template -| | ... -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4udp-ip4base-iacl50sf-10kflows-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4udp-ip4base-iacl50sf-10kflows-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4udp-ip4base-iacl50sf-10kflows-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4udp-ip4base-iacl50sf-10kflows-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4udp-ip4base-iacl50sf-10kflows-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4udp-ip4base-iacl50sf-10kflows-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4udp-ip4base-iacl50sf-10kflows-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4udp-ip4base-iacl50sf-10kflows-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4udp-ip4base-iacl50sf-10kflows-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4udp-ip4base-iacl50sf-10kflows-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4udp-ip4base-iacl50sf-10kflows-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4udp-ip4base-iacl50sf-10kflows-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot deleted file mode 100644 index 3d17e93d4b..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot +++ /dev/null @@ -1,153 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-82599ES | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL -| ... | IACL | ACL50 | 10k_FLOWS -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | Intel-82599ES -| ... | AND | Set up performance test suite with ACL -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput IPv4 test cases with ACL* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with 2p10GE NIC 82599ES Niantic by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} - -# ACL test setup -| ${acl_action}= | permit+reflect -| ${acl_apply_type}= | input -| ${no_hit_aces_number}= | 50 -| ${flows_per_dir}= | 10k - -# starting points for non-hitting ACLs -| ${src_ip_start}= | 30.30.30.1 -| ${dst_ip_start}= | 40.40.40.1 -| ${ip_step}= | ${1} -| ${sport_start}= | ${1000} -| ${dport_start}= | ${1000} -| ${port_step}= | ${1} -| ${trex_stream1_subnet}= | 10.10.10.0/24 -| ${trex_stream2_subnet}= | 20.20.20.0/24 - -| ${traffic_profile}= | trex-sl-3n-ethip4udp-10u1000p-conc - -*** Keywords *** -| Local Template -| | ... -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot deleted file mode 100644 index d6f420db07..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot +++ /dev/null @@ -1,147 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-82599ES | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS -| ... | IACL | ACL50 | 10k_FLOWS -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | Intel-82599ES -| ... | AND | Set up performance test suite with ACL -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results IPv4 test cases with ACL* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with 2p10GE NIC 82599ES Niantic by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic\ -| ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} - -# ACL test setup -| ${acl_action}= | permit -| ${acl_apply_type}= | input -| ${no_hit_aces_number}= | 50 -| ${flows_per_dir}= | 10k - -# starting points for non-hitting ACLs -| ${src_ip_start}= | 30.30.30.1 -| ${dst_ip_start}= | 40.40.40.1 -| ${ip_step}= | ${1} -| ${sport_start}= | ${1000} -| ${dport_start}= | ${1000} -| ${port_step}= | ${1} -| ${trex_stream1_subnet}= | 10.10.10.0/24 -| ${trex_stream2_subnet}= | 20.20.20.0/24 - -| ${traffic_profile}= | trex-sl-3n-ethip4udp-10u1000p-conc - -*** Keywords *** -| Local Template -| | ... -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4udp-ip4base-iacl50sl-10kflows-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4udp-ip4base-iacl50sl-10kflows-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4udp-ip4base-iacl50sl-10kflows-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4udp-ip4base-iacl50sl-10kflows-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4udp-ip4base-iacl50sl-10kflows-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4udp-ip4base-iacl50sl-10kflows-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4udp-ip4base-iacl50sl-10kflows-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4udp-ip4base-iacl50sl-10kflows-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4udp-ip4base-iacl50sl-10kflows-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4udp-ip4base-iacl50sl-10kflows-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4udp-ip4base-iacl50sl-10kflows-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4udp-ip4base-iacl50sl-10kflows-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot deleted file mode 100644 index f122dfa5c8..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot +++ /dev/null @@ -1,153 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-82599ES | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS -| ... | IACL | ACL50 | 10k_FLOWS -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | Intel-82599ES -| ... | AND | Set up performance test suite with ACL -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput IPv4 test cases with ACL* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with 2p10GE NIC 82599ES Niantic by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} - -# ACL test setup -| ${acl_action}= | permit -| ${acl_apply_type}= | input -| ${no_hit_aces_number}= | 50 -| ${flows_per_dir}= | 10k - -# starting points for non-hitting ACLs -| ${src_ip_start}= | 30.30.30.1 -| ${dst_ip_start}= | 40.40.40.1 -| ${ip_step}= | ${1} -| ${sport_start}= | ${1000} -| ${dport_start}= | ${1000} -| ${port_step}= | ${1} -| ${trex_stream1_subnet}= | 10.10.10.0/24 -| ${trex_stream2_subnet}= | 20.20.20.0/24 - -| ${traffic_profile}= | trex-sl-3n-ethip4udp-10u1000p-conc - -*** Keywords *** -| Local Template -| | ... -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4udp-ip4base-nat44-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4udp-ip4base-nat44-mrr.robot deleted file mode 100644 index b62048f4f3..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4udp-ip4base-nat44-mrr.robot +++ /dev/null @@ -1,131 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/ip/nat.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-82599ES | ETH | IP4FWD | FEATURE | NAT44 | BASE -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | Intel-82599ES -| ... | AND | Set up performance test suite with NAT -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results NAT44 performance test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2 -| ... | tested with 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4udp-1u1p - -*** Keywords *** -| Local Template -| | ... -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Add NAT to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When Initialize NAT44 in circular topology -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4udp-ip4base-nat44-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4udp-ip4base-nat44-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4udp-ip4base-nat44-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4udp-ip4base-nat44-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4udp-ip4base-nat44-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4udp-ip4base-nat44-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4udp-ip4base-nat44-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4udp-ip4base-nat44-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4udp-ip4base-nat44-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4udp-ip4base-nat44-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4udp-ip4base-nat44-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4udp-ip4base-nat44-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4udp-ip4base-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4udp-ip4base-nat44-ndrpdr.robot deleted file mode 100644 index f5b4c25293..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4udp-ip4base-nat44-ndrpdr.robot +++ /dev/null @@ -1,137 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/ip/nat.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-82599ES | ETH | IP4FWD | FEATURE | NAT44 | BASE -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | Intel-82599ES -| ... | AND | Set up performance test suite with NAT -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2 -| ... | tested with 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4udp-1u1p - -*** Keywords *** -| Local Template -| | ... -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Add NAT to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When Initialize NAT44 in circular topology -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-ethip4udp-ip4base-nat44-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4udp-ip4base-nat44-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4udp-ip4base-nat44-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4udp-ip4base-nat44-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4udp-ip4base-nat44-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4udp-ip4base-nat44-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4udp-ip4base-nat44-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4udp-ip4base-nat44-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4udp-ip4base-nat44-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4udp-ip4base-nat44-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4udp-ip4base-nat44-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4udp-ip4base-nat44-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr.robot deleted file mode 100644 index deb12e279e..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr.robot +++ /dev/null @@ -1,132 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/ip/nat.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-82599ES | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_1000 -| ... | SCALE -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | Intel-82599ES -| ... | AND | Set up performance test suite with NAT -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results NAT44 performance test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2 -| ... | tested with 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4udp-1000u15p - -*** Keywords *** -| Local Template -| | ... -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Add NAT to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When Initialize NAT44 in circular topology -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr.robot deleted file mode 100644 index 9323778a50..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x82599es-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr.robot +++ /dev/null @@ -1,138 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/ip/nat.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-82599ES | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_1000 -| ... | SCALE -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | Intel-82599ES -| ... | AND | Set up performance test suite with NAT -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2 -| ... | tested with 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4udp-1000u15p - -*** Keywords *** -| Local Template -| | ... -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Add NAT to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When Initialize NAT44 in circular topology -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x82599es-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-mrr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x82599es-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-mrr.robot deleted file mode 100644 index f2ccd407c6..0000000000 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x82599es-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-mrr.robot +++ /dev/null @@ -1,132 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-82599ES | L2BDMACLRN | SCALE | L2BD_1K | DOT1Q | VLAN_1K -| ... | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | VXLAN_1K -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-82599ES -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results L2BD with IEEE 802.1Q and VXLANoIPv4 test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-Dot1Q-IPv4 for L2 switching of IPv4\ -| ... | on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with 1k L2\ -| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and\ -| ... | DUT2. DUT1 and DUT2 tested with 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic\ -| ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k\ -| ... | flows per flow-group) with all packets containing Ethernet header,\ -| ... | IEEE 802.1Q header, IPv4 header with IP protocol=61 and static payload.\ -| ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -| ${overhead}= | ${50} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-dot1qip4-vlan1kip4src254ip4dst254 -# Number of VXLAN tunnels -| ${vxlan_count}= | ${1000} - -*** Keywords *** -| Local Template -| | ... -| | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD forwarding config with VLAN and VXLAN and\ -| | ... | uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${overhead} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize L2 bridge domain with VLAN and VXLANoIPv4 in 3-node circular topology -| | ... | vxlan_count=${vxlan_count} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x82599es-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x82599es-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot deleted file mode 100644 index abd5f9992c..0000000000 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x82599es-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot +++ /dev/null @@ -1,139 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-82599ES | L2BDMACLRN | SCALE | L2BD_1K | DOT1Q | VLAN_1K -| ... | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | VXLAN_1K -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-82599ES -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4 -| ... | test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-Dot1Q-IPv4 for L2 switching of IPv4\ -| ... | on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with 1k L2\ -| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and\ -| ... | DUT2. DUT1 and DUT2 tested with 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k\ -| ... | flows per flow-group) with all packets containing Ethernet header, IEEE\ -| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload.\ -| ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -| ${overhead}= | ${50} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-dot1qip4-vlan1kip4src254ip4dst254 -# Number of VXLAN tunnels -| ${vxlan_count}= | ${1000} - -*** Keywords *** -| Local Template -| | ... -| | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD forwarding config with VLAN and VXLAN and\ -| | ... | uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${overhead} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize L2 bridge domain with VLAN and VXLANoIPv4 in 3-node circular topology -| | ... | vxlan_count=${vxlan_count} -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x82599es-dot1ad-l2xcbase-mrr.robot b/tests/vpp/perf/l2/10ge2p1x82599es-dot1ad-l2xcbase-mrr.robot deleted file mode 100644 index 7e8bf3dd11..0000000000 --- a/tests/vpp/perf/l2/10ge2p1x82599es-dot1ad-l2xcbase-mrr.robot +++ /dev/null @@ -1,144 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/l2/tagging.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-82599ES | L2XCFWD | BASE | DOT1AD -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-82599ES -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results L2XC with 802.1ad test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 xconnect. -| ... | 802.1ad tagging is applied on link between DUT1 and DUT2 with inner 4B -| ... | vlan tag (id=100) and outer 4B vlan tag (id=200). -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| ${subid}= | 10 -| ${outer_vlan_id}= | 100 -| ${inner_vlan_id}= | 200 -| ${type_subif}= | two_tags -| ${tag_rewrite}= | pop-2 -| ${overhead}= | ${8} -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${overhead} -| | And Apply startup configuration on all VPP DUTs -| | And Set interfaces in path up -| | When Initialize VLAN sub-interfaces in 3-node circular topology -| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} -| | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif} -| | And Configure L2 tag rewrite method on interfaces -| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} -| | ... | ${tag_rewrite} -| | And Connect interfaces and VLAN sub-interfaces using L2XC -| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} -| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-dot1ad-l2xcbase-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-dot1ad-l2xcbase-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-dot1ad-l2xcbase-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-dot1ad-l2xcbase-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-dot1ad-l2xcbase-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-dot1ad-l2xcbase-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-dot1ad-l2xcbase-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-dot1ad-l2xcbase-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-dot1ad-l2xcbase-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-dot1ad-l2xcbase-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-dot1ad-l2xcbase-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-dot1ad-l2xcbase-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x82599es-dot1ad-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x82599es-dot1ad-l2xcbase-ndrpdr.robot deleted file mode 100644 index 80bc97608f..0000000000 --- a/tests/vpp/perf/l2/10ge2p1x82599es-dot1ad-l2xcbase-ndrpdr.robot +++ /dev/null @@ -1,150 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/l2/tagging.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-82599ES | L2XCFWD | BASE | DOT1AD -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-82599ES -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput L2XC with 802.1ad test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 xconnect. -| ... | 802.1ad tagging is applied on link between DUT1 and DUT2 with inner 4B -| ... | vlan tag (id=100) and outer 4B vlan tag (id=200). -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| ${subid}= | 10 -| ${outer_vlan_id}= | 100 -| ${inner_vlan_id}= | 200 -| ${type_subif}= | two_tags -| ${tag_rewrite}= | pop-2 -| ${overhead}= | ${8} -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${overhead} -| | And Apply startup configuration on all VPP DUTs -| | And Set interfaces in path up -| | When Initialize VLAN sub-interfaces in 3-node circular topology -| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} -| | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif} -| | And Configure L2 tag rewrite method on interfaces -| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} -| | ... | ${tag_rewrite} -| | And Connect interfaces and VLAN sub-interfaces using L2XC -| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} -| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-dot1ad-l2xcbase-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-dot1ad-l2xcbase-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-dot1ad-l2xcbase-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-dot1ad-l2xcbase-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-dot1ad-l2xcbase-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-dot1ad-l2xcbase-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-dot1ad-l2xcbase-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-dot1ad-l2xcbase-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-dot1ad-l2xcbase-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-dot1ad-l2xcbase-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-dot1ad-l2xcbase-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-dot1ad-l2xcbase-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x82599es-dot1q-l2bdbasemaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x82599es-dot1q-l2bdbasemaclrn-mrr.robot deleted file mode 100644 index d43aef78a5..0000000000 --- a/tests/vpp/perf/l2/10ge2p1x82599es-dot1q-l2bdbasemaclrn-mrr.robot +++ /dev/null @@ -1,134 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-82599ES | BASE | DOT1Q | L2BDMACLRN -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-82599ES -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results L2BD with IEEE 802.1Q test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. IEEE\ -| ... | 802.1Q tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge\ -| ... | domain and MAC learning enabled. DUT1 and DUT2 are tested with 2p10GE\ -| ... | NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ -| ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ -| ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| ${subid}= | 10 -| ${tag_rewrite}= | pop-1 -| ${overhead}= | ${4} -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -# Bridge domain IDs -| ${bd_id1}= | 1 -| ${bd_id2}= | 2 -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD config with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${overhead} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize L2 bridge domains with VLAN dot1q sub-interfaces in circular topology -| | ... | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-dot1q-l2bdbasemaclrn-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-dot1q-l2bdbasemaclrn-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-dot1q-l2bdbasemaclrn-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-dot1q-l2bdbasemaclrn-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-dot1q-l2bdbasemaclrn-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-dot1q-l2bdbasemaclrn-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-dot1q-l2bdbasemaclrn-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-dot1q-l2bdbasemaclrn-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-dot1q-l2bdbasemaclrn-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-dot1q-l2bdbasemaclrn-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-dot1q-l2bdbasemaclrn-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-dot1q-l2bdbasemaclrn-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x82599es-dot1q-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x82599es-dot1q-l2bdbasemaclrn-ndrpdr.robot deleted file mode 100644 index de68f47e7f..0000000000 --- a/tests/vpp/perf/l2/10ge2p1x82599es-dot1q-l2bdbasemaclrn-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-82599ES | BASE | DOT1Q | L2BDMACLRN -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-82599ES -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. IEEE\ -| ... | 802.1Q tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge\ -| ... | domain and MAC learning enabled. DUT1 and DUT2 are tested with 2p10GE\ -| ... | NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library. Test packets are\ -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\ -| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| ${subid}= | 10 -| ${tag_rewrite}= | pop-1 -| ${overhead}= | ${4} -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -# Bridge domain IDs -| ${bd_id1}= | 1 -| ${bd_id2}= | 2 -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD config with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${overhead} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize L2 bridge domains with VLAN dot1q sub-interfaces in circular topology -| | ... | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite} -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-dot1q-l2bdbasemaclrn-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-dot1q-l2bdbasemaclrn-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-dot1q-l2bdbasemaclrn-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-dot1q-l2bdbasemaclrn-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-dot1q-l2bdbasemaclrn-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-dot1q-l2bdbasemaclrn-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-dot1q-l2bdbasemaclrn-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-dot1q-l2bdbasemaclrn-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-dot1q-l2bdbasemaclrn-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-dot1q-l2bdbasemaclrn-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-dot1q-l2bdbasemaclrn-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-dot1q-l2bdbasemaclrn-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr.robot b/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr.robot deleted file mode 100644 index 0829487f21..0000000000 --- a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr.robot +++ /dev/null @@ -1,148 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-82599ES | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL -| ... | IACL | ACL50 | 10k_FLOWS -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | Intel-82599ES -| ... | AND | Set up performance test suite with ACL -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results L2BD test cases with ACL* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with 2p10GE NIC 82599ES by Intel.\ -| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ -| ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} - -# ACL test setup -| ${acl_action}= | permit+reflect -| ${acl_apply_type}= | input -| ${no_hit_aces_number}= | 50 -| ${flows_per_dir}= | 10k - -# starting points for non-hitting ACLs -| ${src_ip_start}= | 30.30.30.1 -| ${dst_ip_start}= | 40.40.40.1 -| ${ip_step}= | ${1} -| ${sport_start}= | ${1000} -| ${dport_start}= | ${1000} -| ${port_step}= | ${1} -| ${trex_stream1_subnet}= | 10.10.10.0/24 -| ${trex_stream2_subnet}= | 20.20.20.0/24 - -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4udp-10u1000p-conc - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy -| | ... | core(s). -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot deleted file mode 100644 index a1024189f9..0000000000 --- a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot +++ /dev/null @@ -1,154 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-82599ES | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL -| ... | IACL | ACL50 | 10k_FLOWS -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | Intel-82599ES -| ... | AND | Set up performance test suite with ACL -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput L2BD test cases with ACL* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with 2p10GE NIC 82599ES by Intel.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} - -# ACL test setup -| ${acl_action}= | permit+reflect -| ${acl_apply_type}= | input -| ${no_hit_aces_number}= | 50 -| ${flows_per_dir}= | 10k - -# starting points for non-hitting ACLs -| ${src_ip_start}= | 30.30.30.1 -| ${dst_ip_start}= | 40.40.40.1 -| ${ip_step}= | ${1} -| ${sport_start}= | ${1000} -| ${dport_start}= | ${1000} -| ${port_step}= | ${1} -| ${trex_stream1_subnet}= | 10.10.10.0/24 -| ${trex_stream2_subnet}= | 20.20.20.0/24 - -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4udp-10u1000p-conc - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy -| | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr.robot b/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr.robot deleted file mode 100644 index 69da50c602..0000000000 --- a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr.robot +++ /dev/null @@ -1,148 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-82599ES | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS -| ... | IACL | ACL50 | 10k_FLOWS -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | Intel-82599ES -| ... | AND | Set up performance test suite with ACL -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results L2BD test cases with ACL* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with 2p10GE NIC 82599ES by Intel.\ -| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ -| ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} - -# ACL test setup -| ${acl_action}= | permit -| ${acl_apply_type}= | input -| ${no_hit_aces_number}= | 50 -| ${flows_per_dir}= | 10k - -# starting points for non-hitting ACLs -| ${src_ip_start}= | 30.30.30.1 -| ${dst_ip_start}= | 40.40.40.1 -| ${ip_step}= | ${1} -| ${sport_start}= | ${1000} -| ${dport_start}= | ${1000} -| ${port_step}= | ${1} -| ${trex_stream1_subnet}= | 10.10.10.0/24 -| ${trex_stream2_subnet}= | 20.20.20.0/24 - -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4udp-10u1000p-conc - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy -| | ... | core(s). -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot deleted file mode 100644 index 36c514a1a7..0000000000 --- a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot +++ /dev/null @@ -1,154 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-82599ES | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS -| ... | IACL | ACL50 | 10k_FLOWS -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | Intel-82599ES -| ... | AND | Set up performance test suite with ACL -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput L2BD test cases with ACL* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with 2p10GE NIC 82599ES by Intel.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} - -# ACL test setup -| ${acl_action}= | permit -| ${acl_apply_type}= | input -| ${no_hit_aces_number}= | 50 -| ${flows_per_dir}= | 10k - -# starting points for non-hitting ACLs -| ${src_ip_start}= | 30.30.30.1 -| ${dst_ip_start}= | 40.40.40.1 -| ${ip_step}= | ${1} -| ${sport_start}= | ${1000} -| ${dport_start}= | ${1000} -| ${port_step}= | ${1} -| ${trex_stream1_subnet}= | 10.10.10.0/24 -| ${trex_stream2_subnet}= | 20.20.20.0/24 - -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4udp-10u1000p-conc - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy -| | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdbasemaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdbasemaclrn-mrr.robot deleted file mode 100644 index 0e1a979536..0000000000 --- a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdbasemaclrn-mrr.robot +++ /dev/null @@ -1,126 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-82599ES | ETH | L2BDMACLRN | BASE -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-82599ES -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results L2BD test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\ -| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NIC\ -| ... | Intel-82599ES. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic\ -| ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ -| ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# Link limit: -| ${s_limit}= | ${10000000000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD switching config and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | Apply startup configuration on all VPP DUTs -| | Initialize L2 bridge domain in circular topology -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-eth-l2bdbasemaclrn-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bdbasemaclrn-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bdbasemaclrn-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bdbasemaclrn-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bdbasemaclrn-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bdbasemaclrn-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bdbasemaclrn-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bdbasemaclrn-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bdbasemaclrn-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bdbasemaclrn-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bdbasemaclrn-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bdbasemaclrn-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdbasemaclrn-ndrpdr.robot deleted file mode 100644 index f8f94b1823..0000000000 --- a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdbasemaclrn-ndrpdr.robot +++ /dev/null @@ -1,132 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-82599ES | ETH | L2BDMACLRN | BASE -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-82599ES -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput L2BD test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\ -| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NIC\ -| ... | 82599ES. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ -| ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# Link limit: -| ${s_limit}= | ${10000000000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD switching config and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ... -| | Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | Apply startup configuration on all VPP DUTs -| | Initialize L2 bridge domain in circular topology -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-eth-l2bdbasemaclrn-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bdbasemaclrn-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bdbasemaclrn-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bdbasemaclrn-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bdbasemaclrn-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bdbasemaclrn-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bdbasemaclrn-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bdbasemaclrn-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bdbasemaclrn-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bdbasemaclrn-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bdbasemaclrn-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bdbasemaclrn-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdscale100kmaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdscale100kmaclrn-mrr.robot deleted file mode 100644 index 0a8a5c8db9..0000000000 --- a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdscale100kmaclrn-mrr.robot +++ /dev/null @@ -1,130 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-82599ES | ETH | L2BDMACLRN | SCALE | L2BDSCALE | FIB_100K -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-82599ES -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results for L2BD test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\ -| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NIC\ -| ... | 82599ES by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ -| ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 50k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload.\ -| ... | MAC addresses ranges are incremented as follows: -| ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, -| ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, -| ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, -| ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-macsrc50kdst50k - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [CFG] Each DUT runs L2BD switching config and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize L2 bridge domain in circular topology -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-eth-l2bdscale100kmaclrn-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bdscale100kmaclrn-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bdscale100kmaclrn-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bdscale100kmaclrn-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bdscale100kmaclrn-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bdscale100kmaclrn-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bdscale100kmaclrn-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bdscale100kmaclrn-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bdscale100kmaclrn-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bdscale100kmaclrn-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bdscale100kmaclrn-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bdscale100kmaclrn-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdscale100kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdscale100kmaclrn-ndrpdr.robot deleted file mode 100644 index 3ff01fa5ab..0000000000 --- a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdscale100kmaclrn-ndrpdr.robot +++ /dev/null @@ -1,136 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-82599ES | ETH | L2BDMACLRN | SCALE | L2BDSCALE | FIB_100K -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-82599ES -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput for L2BD test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\ -| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NIC\ -| ... | 82599ES by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 50k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload.\ -| ... | MAC addresses ranges are incremented as follows: -| ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, -| ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, -| ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, -| ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-macsrc50kdst50k - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [CFG] Each DUT runs L2BD switching config and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize L2 bridge domain in circular topology -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-eth-l2bdscale100kmaclrn-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bdscale100kmaclrn-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bdscale100kmaclrn-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bdscale100kmaclrn-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bdscale100kmaclrn-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bdscale100kmaclrn-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bdscale100kmaclrn-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bdscale100kmaclrn-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bdscale100kmaclrn-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bdscale100kmaclrn-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bdscale100kmaclrn-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bdscale100kmaclrn-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdscale10kmaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdscale10kmaclrn-mrr.robot deleted file mode 100644 index b4b34495f1..0000000000 --- a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdscale10kmaclrn-mrr.robot +++ /dev/null @@ -1,130 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-82599ES | ETH | L2BDMACLRN | SCALE | L2BDSCALE | FIB_10K -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-82599ES -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results for L2BD test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\ -| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NIC\ -| ... | 82599ES by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ -| ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 5k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload.\ -| ... | MAC addresses ranges are incremented as follows: -| ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, -| ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, -| ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, -| ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-macsrc5kdst5k - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [CFG] Each DUT runs L2BD switching config and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize L2 bridge domain in circular topology -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-eth-l2bdscale10kmaclrn-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bdscale10kmaclrn-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bdscale10kmaclrn-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bdscale10kmaclrn-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bdscale10kmaclrn-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bdscale10kmaclrn-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bdscale10kmaclrn-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bdscale10kmaclrn-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bdscale10kmaclrn-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bdscale10kmaclrn-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bdscale10kmaclrn-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bdscale10kmaclrn-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdscale10kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdscale10kmaclrn-ndrpdr.robot deleted file mode 100644 index 0023b5bf24..0000000000 --- a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdscale10kmaclrn-ndrpdr.robot +++ /dev/null @@ -1,136 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-82599ES | ETH | L2BDMACLRN | SCALE | L2BDSCALE | FIB_10K -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-82599ES -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput for L2BD test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\ -| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NIC\ -| ... | 82599ES by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 5k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload.\ -| ... | MAC addresses ranges are incremented as follows: -| ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, -| ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, -| ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, -| ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-macsrc5kdst5k - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [CFG] Each DUT runs L2BD switching config and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize L2 bridge domain in circular topology -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-eth-l2bdscale10kmaclrn-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bdscale10kmaclrn-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bdscale10kmaclrn-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bdscale10kmaclrn-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bdscale10kmaclrn-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bdscale10kmaclrn-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bdscale10kmaclrn-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bdscale10kmaclrn-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bdscale10kmaclrn-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bdscale10kmaclrn-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bdscale10kmaclrn-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bdscale10kmaclrn-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdscale1mmaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdscale1mmaclrn-mrr.robot deleted file mode 100644 index 1d382157c0..0000000000 --- a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdscale1mmaclrn-mrr.robot +++ /dev/null @@ -1,130 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-82599ES | ETH | L2BDMACLRN | SCALE | L2BDSCALE | FIB_1M -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-82599ES -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results for L2BD test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\ -| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NIC\ -| ... | 82599ES by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ -| ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 500k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload.\ -| ... | MAC addresses ranges are incremented as follows: -| ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, -| ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, -| ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, -| ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-macsrc500kdst500k - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD switching config and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize L2 bridge domain in circular topology -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-eth-l2bdscale1mmaclrn-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bdscale1mmaclrn-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bdscale1mmaclrn-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bdscale1mmaclrn-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bdscale1mmaclrn-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bdscale1mmaclrn-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bdscale1mmaclrn-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bdscale1mmaclrn-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bdscale1mmaclrn-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bdscale1mmaclrn-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bdscale1mmaclrn-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bdscale1mmaclrn-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdscale1mmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdscale1mmaclrn-ndrpdr.robot deleted file mode 100644 index 3f5f766c9b..0000000000 --- a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2bdscale1mmaclrn-ndrpdr.robot +++ /dev/null @@ -1,136 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-82599ES | ETH | L2BDMACLRN | SCALE | L2BDSCALE | FIB_1M -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-82599ES -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput for L2BD test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\ -| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NIC\ -| ... | 82599ES by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 500k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload.\ -| ... | MAC addresses ranges are incremented as follows: -| ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, -| ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, -| ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, -| ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-macsrc500kdst500k - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD switching config and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize L2 bridge domain in circular topology -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-eth-l2bdscale1mmaclrn-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bdscale1mmaclrn-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bdscale1mmaclrn-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bdscale1mmaclrn-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bdscale1mmaclrn-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bdscale1mmaclrn-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bdscale1mmaclrn-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bdscale1mmaclrn-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bdscale1mmaclrn-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bdscale1mmaclrn-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bdscale1mmaclrn-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bdscale1mmaclrn-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2patch-mrr.robot b/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2patch-mrr.robot deleted file mode 100644 index cd12374224..0000000000 --- a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2patch-mrr.robot +++ /dev/null @@ -1,127 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-82599ES | ETH | L2PATCH | BASE -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-82599ES -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results L2patch test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 patch. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 patch\ -| ... | DUT1 and DUT2 tested with 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 254 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2 patch config with ${phy_cores} phy -| | ... | core(s). -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Initialize L2 patch -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-eth-l2patch-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2patch-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2patch-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2patch-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2patch-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2patch-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2patch-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2patch-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2patch-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2patch-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2patch-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2patch-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2patch-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2patch-ndrpdr.robot deleted file mode 100644 index b538be0efb..0000000000 --- a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2patch-ndrpdr.robot +++ /dev/null @@ -1,133 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-82599ES | ETH | L2PATCH | BASE -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-82599ES -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput L2patch test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 patch. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 patch\ -| ... | DUT1 and DUT2 tested with 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header,IPv4 header with static payload.\ -| ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2 patch config with ${phy_cores} phy -| | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Initialize L2 patch -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-eth-l2patch-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2patch-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2patch-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2patch-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2patch-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2patch-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2patch-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2patch-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2patch-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2patch-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2patch-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2patch-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2xcbase-mrr.robot b/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2xcbase-mrr.robot deleted file mode 100644 index 2a7aeb7441..0000000000 --- a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2xcbase-mrr.robot +++ /dev/null @@ -1,125 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-82599ES | ETH | L2XCFWD | BASE | L2XCBASE -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-82599ES -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results L2XC test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with ${phy_cores} phy -| | ... | core(s). -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect in 3-node circular topology -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-eth-l2xcbase-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2xcbase-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2xcbase-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2xcbase-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2xcbase-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2xcbase-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2xcbase-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2xcbase-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2xcbase-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2xcbase-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2xcbase-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2xcbase-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2xcbase-ndrpdr.robot deleted file mode 100644 index 22ee5531cb..0000000000 --- a/tests/vpp/perf/l2/10ge2p1x82599es-eth-l2xcbase-ndrpdr.robot +++ /dev/null @@ -1,131 +0,0 @@ -# Copyright (c) 2019 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-82599ES | ETH | L2XCFWD | BASE | L2XCBASE -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-82599ES -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC 82599ES by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# 82599ES bandwidth limit -| ${s_limit}= | ${10000000000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with ${phy_cores} phy -| | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect in 3-node circular topology -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-eth-l2xcbase-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2xcbase-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2xcbase-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2xcbase-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2xcbase-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2xcbase-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2xcbase-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2xcbase-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2xcbase-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2xcbase-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2xcbase-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2xcbase-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} |