Remove obsolete L2 KW

Change-Id: I9a8aa6f5ccf95d632f4e677c8bf14f50b982d930
Signed-off-by: Peter Mikus <pmikus@cisco.com>

6 files changed, 0 insertions, 843 deletions

diff --git a/tests/vpp/func/ip4_tunnels/gre/eth2p-ethip4gre-ip4base-func.robot b/tests/vpp/func/ip4_tunnels/gre/eth2p-ethip4gre-ip4base-func.robot
deleted file mode 100644
index 2b67db5d7e..0000000000
--- a/tests/vpp/func/ip4_tunnels/gre/eth2p-ethip4gre-ip4base-func.robot
+++ /dev/null
@@ -1,311 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library  | resources.libraries.python.IPUtil
-| Library  | resources.libraries.python.Trace
-| ...
-| Resource | resources/libraries/robot/ip/ip4.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/overlay/gre.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| ...
-| Force Tags | VM_ENV | HW_ENV | 3_NODE_DOUBLE_LINK_TOPO | SKIP_VPP_PATCH
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down functional test
-| ...
-| Documentation | *GREoIPv4 test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links
-| ... | between nodes; TG-DUT1-DUT2-TG 3-node circular topology with single
-| ... | links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-GRE-IPv4-ICMPv4 on DUT1-DUT2,
-| ... | Eth-IPv4-ICMPv4 on TG-DUTn for routing over GRE tunnel; Eth-IPv4-ICMPv4
-| ... | on TG_if1-DUT, Eth-IPv4-GRE-IPv4-ICMPv4 on TG_if2_DUT for GREoIPv4
-| ... | encapsulation and decapsulation verification.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 routing
-| ... | and static routes. GREoIPv4 tunnel is configured between DUT1 and DUT2.
-| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets are
-| ... | sent in both directions by TG on links to DUT1 and DUT2; GREoIPv4
-| ... | encapsulation and decapsulation are verified separately by TG; on
-| ... | receive TG verifies packets for correctness and their IPv4 (IPv6)
-| ... | src-addr, dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC2784.
-
-*** Variables ***
-| ${net1_address}= | 192.168.0.0
-| ${net1_host_address}= | 192.168.0.100
-| ${net1_gw_address}= | 192.168.0.1
-| ${net2_address}= | 192.168.2.0
-| ${net2_host_address}= | 192.168.2.100
-| ${net3_address}= | 192.168.3.0
-| ${net3_host_address}= | 192.168.3.100
-| ${net2_gw_address}= | 192.168.2.1
-| ${dut1_ip_address}= | 192.168.1.1
-| ${dut2_ip_address}= | 192.168.1.2
-| ${dut1_gre_ip}= | 172.16.0.1
-| ${dut2_gre_ip}= | 172.16.0.2
-| ${dut_tun0_ip1}= | 172.16.0.1
-| ${dut_tun0_ip2}= | 172.16.0.2
-| ${dut_tun1_ip1}= | 172.16.1.1
-| ${dut_tun1_ip2}= | 172.16.1.2
-| ${dut1_lo_address}= | 10.0.0.1
-| ${tun0_dst}= | 10.0.0.2
-| ${tun1_dst}= | 10.0.0.3
-| ${prefix}= | 24
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 route over GREoIPv4 tunnel between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-GRE-IPv4-ICMPv4 on \
-| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 and DUT2
-| | ... | configure GREoIPv4 tunnel with IPv4 routes towards each other.
-| | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces across
-| | ... | both DUTs and GRE tunnel between them; verify IPv4 headers on
-| | ... | received packets are correct. [Ref] RFC2784.
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO
-| | Given Configure path in 3-node circular topology | ${nodes['TG']}
-| | ... | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Configure IP addresses on interfaces
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_ip_address} | ${prefix}
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${net1_gw_address} | ${prefix}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_ip_address} | ${prefix}
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${net2_gw_address} | ${prefix}
-| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${dut2_ip_address}
-| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${dut1_ip_address}
-| | And VPP Add IP Neighbor | ${dut2_node} | ${dut2_to_tg}
-| | ... | ${net2_host_address} | ${tg_to_dut2_mac}
-| | ${dut1_gre_interface} | ${dut1_gre_index}=
-| | ... | When Create GRE tunnel interface and set it up
-| | ... | ${dut1_node} | ${dut1_ip_address} | ${dut2_ip_address}
-| | ${dut2_gre_interface} | ${dut2_gre_index}=
-| | ... | And Create GRE tunnel interface and set it up
-| | ... | ${dut2_node} | ${dut2_ip_address} | ${dut1_ip_address}
-| | And Configure IP addresses on interfaces
-| | ... | ${dut1_node} | ${dut1_gre_index} | ${dut1_gre_ip} | ${prefix}
-| | ... | ${dut2_node} | ${dut2_gre_index} | ${dut2_gre_ip} | ${prefix}
-| | And Vpp Route Add | ${dut1_node} | ${net2_address} | ${prefix}
-| | ... | gateway=${dut2_gre_ip} | interface=${dut1_gre_index}
-| | Then Send packet and verify headers | ${tg_node}
-| | ... | ${net1_host_address} | ${net2_host_address}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-
-| TC02: DUT encapsulates IPv4 into GREoIPv4 tunnel - GRE header verification
-| | [Documentation]
-| | ... | [Top] TG=DUT1. [Enc] Eth-IPv4-ICMPv4 on TG_if1-DUT, \
-| | ... | Eth-IPv4-GRE-IPv4-ICMPv4 on TG_if2_DUT. [Cfg] On DUT1 configure
-| | ... | GREoIPv4 tunnel with IPv4 route towards TG. [Ver] Make TG send
-| | ... | non-encapsulated ICMPv4 Echo Req to DUT; verify TG received
-| | ... | GREoIPv4 encapsulated packet is correct. [Ref] RFC2784.
-| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Set interfaces in 2-node circular topology up
-| | And Configure IP addresses on interfaces
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut1_ip_address} | ${prefix}
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${net1_gw_address} | ${prefix}
-| | And VPP Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2}
-| | ... | ${dut2_ip_address} | ${tg_to_dut_if2_mac}
-| | ${dut1_gre_interface} | ${dut1_gre_index}=
-| | ... | When Create GRE tunnel interface and set it up
-| | ... | ${dut_node} | ${dut1_ip_address} | ${dut2_ip_address}
-| | And Configure IP addresses on interfaces
-| | ... | ${dut_node} | ${dut1_gre_index} | ${dut1_gre_ip} | ${prefix}
-| | And Vpp Route Add | ${dut_node} | ${net2_address} | ${prefix}
-| | ... | gateway=${dut2_gre_ip} | interface=${dut1_gre_index}
-| | Then Send ICMPv4 and check received GRE header
-| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2}
-| | ... | ${dut_to_tg_if1_mac} | ${tg_to_dut_if2_mac}
-| | ... | ${net1_host_address} | ${net2_host_address}
-| | ... | ${dut1_ip_address} | ${dut2_ip_address}
-
-| TC03: DUT decapsulates IPv4 from GREoIPv4 tunnel - IPv4 header verification
-| | [Documentation]
-| | ... | [Top] TG=DUT1. [Enc] Eth-IPv4-ICMPv4 on TG_if1-DUT, \
-| | ... | Eth-IPv4-GRE-IPv4-ICMPv4 on TG_if2_DUT. [Cfg] On DUT1 configure
-| | ... | GREoIPv4 tunnel towards TG. [Ver] Make TG send ICMPv4 Echo Req
-| | ... | encapsulated into GREoIPv4 towards VPP; verify TG received IPv4
-| | ... | de-encapsulated packet is correct. [Ref] RFC2784.
-| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Set interfaces in 2-node circular topology up
-| | And Configure IP addresses on interfaces
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut1_ip_address} | ${prefix}
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${net1_gw_address} | ${prefix}
-| | And VPP Add IP Neighbor | ${dut_node} | ${dut_to_tg_if1}
-| | ... | ${net1_host_address} | ${tg_to_dut_if1_mac}
-| | ${dut1_gre_interface} | ${dut1_gre_index}=
-| | ... | When Create GRE tunnel interface and set it up
-| | ... | ${dut_node} | ${dut1_ip_address} | ${dut2_ip_address}
-| | And Configure IP addresses on interfaces
-| | ... | ${dut_node} | ${dut1_gre_index} | ${dut1_gre_ip} | ${prefix}
-| | Then Send GRE and check received ICMPv4 header
-| | ... | ${tg_node} | ${tg_to_dut_if2} | ${tg_to_dut_if1}
-| | ... | ${dut_to_tg_if2_mac} | ${tg_to_dut_if1_mac}
-| | ... | ${net2_host_address} | ${net1_host_address}
-| | ... | ${dut2_ip_address} | ${dut1_ip_address}
-
-| TC04: DUT encapsulates IPv4 into GREoIPv4 different tunnels - GRE header verification
-| | [Documentation]
-| | ... | [Top] TG=DUT1. [Enc] Eth-IPv4-ICMPv4 on TG_if1-DUT, \
-| | ... | Eth-IPv4-GRE-IPv4-ICMPv4 on TG_if2_DUT. [Cfg] On DUT1 configure two
-| | ... | GRE tunnels with loopback's source address. Destination address of
-| | ... | tunnels are routed via next hop address of DUT's to TG if2, where
-| | ... | should be only GRE encapsulated packets. Each tunnel has IPv4 address
-| | ... | and configured prefix routed through the tunnel. [Ver] Make TG send
-| | ... | non-encapsulated ICMPv4 Echo Req to DUT; verify TG received GREoIPv4
-| | ... | encapsulated packet is correct for each tunnel. [Ref] RFC2784.
-| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Set interfaces in 2-node circular topology up
-| | ${dut1_lo_index}= | And VPP Create loopback | ${dut_node}
-| | And Set Interface State | ${dut_node} | ${dut1_lo_index} | up
-| | And Configure IP addresses on interfaces
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut1_ip_address} | ${prefix}
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${net1_gw_address} | ${prefix}
-| | ... | ${dut_node} | ${dut1_lo_index} | ${dut1_lo_address} | ${32}
-| | And VPP Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2}
-| | ... | ${dut2_ip_address} | ${tg_to_dut_if2_mac}
-| | And Vpp Route Add | ${dut_node} | ${tun0_dst} | ${32}
-| | ... | gateway=${dut2_ip_address} | interface=${dut_to_tg_if2}
-| | And Vpp Route Add | ${dut_node} | ${tun1_dst} | ${32}
-| | ... | gateway=${dut2_ip_address} | interface=${dut_to_tg_if2}
-| | ${dut1_gre0_interface} | ${dut1_gre0_index}=
-| | ... | When Create GRE tunnel interface and set it up
-| | ... | ${dut_node} | ${dut1_lo_address} | ${tun0_dst}
-| | ${dut1_gre1_interface} | ${dut1_gre1_index}=
-| | ... | And Create GRE tunnel interface and set it up
-| | ... | ${dut_node} | ${dut1_lo_address} | ${tun1_dst}
-| | And Configure IP addresses on interfaces
-| | ... | ${dut_node} | ${dut1_gre0_index} | ${dut_tun0_ip1} | ${prefix}
-| | ... | ${dut_node} | ${dut1_gre1_index} | ${dut_tun1_ip1} | ${prefix}
-| | And Vpp Route Add | ${dut_node} | ${net2_address} | ${prefix}
-| | ... | gateway=${dut_tun0_ip2} | interface=${dut1_gre0_index}
-| | And Vpp Route Add | ${dut_node} | ${net3_address} | ${prefix}
-| | ... | gateway=${dut_tun1_ip2} | interface=${dut1_gre1_index}
-| | Then Send ICMPv4 and check received GRE header
-| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2}
-| | ... | ${dut_to_tg_if1_mac} | ${tg_to_dut_if2_mac}
-| | ... | ${net1_host_address} | ${net2_host_address}
-| | ... | ${dut1_lo_address} | ${tun0_dst}
-| | And Send ICMPv4 and check received GRE header
-| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2}
-| | ... | ${dut_to_tg_if1_mac} | ${tg_to_dut_if2_mac}
-| | ... | ${net1_host_address} | ${net3_host_address}
-| | ... | ${dut1_lo_address} | ${tun1_dst}
-
-| TC05: DUT re-encapsulates IPv4 GRE into other GRE tunnel - GRE header verification
-| | [Documentation]
-| | ... | [Top] TG=DUT1. [Enc] Eth-IPv4-ICMPv4 on TG_if1-DUT, \
-| | ... | Eth-IPv4-GRE-IPv4-ICMPv4 on TG_if2_DUT. [Cfg] On DUT1 configure two
-| | ... | GRE tunnels with loopback's source address. Destination address of
-| | ... | tunnels are routed via next hop address of DUT's to TG if2, where
-| | ... | should be only GRE encapsulated packets. Each tunnel has IPv4 address
-| | ... | and configured prefix routed through the tunnel. [Ver] Make TG send
-| | ... | encapsulated IPv4 UDP to DUT; Encapsulated IP source is behind
-| | ... | configured tunnel same as destination; verify TG received GREoIPv4
-| | ... | encapsulated packet is correct. [Ref] RFC2784.
-| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Set interfaces in 2-node circular topology up
-| | ${dut1_lo_index}= | And VPP Create loopback | ${dut_node}
-| | And Set Interface State | ${dut_node} | ${dut1_lo_index} | up
-| | And Configure IP addresses on interfaces
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut1_ip_address} | ${prefix}
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${net1_gw_address} | ${prefix}
-| | ... | ${dut_node} | ${dut1_lo_index} | ${dut1_lo_address} | ${32}
-| | And VPP Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2}
-| | ... | ${dut2_ip_address} | ${tg_to_dut_if2_mac}
-| | And Vpp Route Add | ${dut_node} | ${tun0_dst} | ${32}
-| | ... | gateway=${dut2_ip_address} | interface=${dut_to_tg_if2}
-| | And Vpp Route Add | ${dut_node} | ${tun1_dst} | ${32}
-| | ... | gateway=${dut2_ip_address} | interface=${dut_to_tg_if2}
-| | ${dut1_gre0_interface} | ${dut1_gre0_index}=
-| | ... | When Create GRE tunnel interface and set it up
-| | ... | ${dut_node} | ${dut1_lo_address} | ${tun0_dst}
-| | ${dut1_gre1_interface} | ${dut1_gre1_index}=
-| | ... | And Create GRE tunnel interface and set it up
-| | ... | ${dut_node} | ${dut1_lo_address} | ${tun1_dst}
-| | And Configure IP addresses on interfaces
-| | ... | ${dut_node} | ${dut1_gre0_index} | ${dut_tun0_ip1} | ${prefix}
-| | ... | ${dut_node} | ${dut1_gre1_index} | ${dut_tun1_ip1} | ${prefix}
-| | And Vpp Route Add | ${dut_node} | ${net2_address} | ${prefix}
-| | ... | gateway=${dut_tun0_ip2} | interface=${dut1_gre0_index}
-| | And Vpp Route Add | ${dut_node} | ${net3_address} | ${prefix}
-| | ... | gateway=${dut_tun1_ip2} | interface=${dut1_gre1_index}
-| | Then Send GRE and check received GRE header
-| | ... | ${tg_node} | ${tg_to_dut_if2} | ${tg_to_dut_if2}
-| | ... | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac}
-| | ... | ${dut1_lo_address} | ${tun0_dst}
-| | ... | ${net3_host_address} | ${net2_host_address}
-| | ... | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac}
-| | ... | ${tun1_dst} | ${dut1_lo_address}
-
-| TC06: DUT do not process GRE with wrong tunnel destination IP
-| | [Documentation]
-| | ... | [Top] TG=DUT1. [Enc] Eth-IPv4-ICMPv4 on TG_if1-DUT, \
-| | ... | Eth-IPv4-GRE-IPv4-ICMPv4 on TG_if2_DUT. [Cfg] On DUT1 configure two
-| | ... | GRE tunnels with loopback's source address. Destination address of
-| | ... | tunnels are routed via next hop address of DUT's to TG if2, where
-| | ... | should be only GRE encapsulated packets. On DUT's to TG if1 interface
-| | ... | is configured test destination host MAC address. [Ver] Make TG send
-| | ... | GRE encapsulated ICMPv4 Echo Req to DUT; verify TG received
-| | ... | de-capsulated packet is correct, then send packet with wrong tunnel
-| | ... | destination address. [Ref] RFC2784.
-| | ... |
-| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Set interfaces in 2-node circular topology up
-| | ${dut1_lo_index}= | And VPP Create loopback | ${dut_node}
-| | And Set Interface State | ${dut_node} | ${dut1_lo_index} | up
-| | And Configure IP addresses on interfaces
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut1_ip_address} | ${prefix}
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${net1_gw_address} | ${prefix}
-| | ... | ${dut_node} | ${dut1_lo_index} | ${dut1_lo_address} | ${32}
-| | And VPP Add IP Neighbor | ${dut_node} | ${dut_to_tg_if1}
-| | ... | ${net1_host_address} | ${tg_to_dut_if1_mac}
-| | And VPP Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2}
-| | ... | ${dut2_ip_address} | ${tg_to_dut_if2_mac}
-| | And Vpp Route Add | ${dut_node} | ${tun0_dst} | ${32}
-| | ... | gateway=${dut2_ip_address} | interface=${dut_to_tg_if2}
-| | And Vpp Route Add | ${dut_node} | ${tun1_dst} | ${32}
-| | ... | gateway=${dut2_ip_address} | interface=${dut_to_tg_if2}
-| | ${dut1_gre0_interface} | ${dut1_gre0_index}=
-| | ... | When Create GRE tunnel interface and set it up
-| | ... | ${dut_node} | ${dut1_lo_address} | ${tun0_dst}
-| | ${dut1_gre1_interface} | ${dut1_gre1_index}=
-| | ... | And Create GRE tunnel interface and set it up
-| | ... | ${dut_node} | ${dut1_lo_address} | ${tun1_dst}
-| | And Configure IP addresses on interfaces
-| | ... | ${dut_node} | ${dut1_gre0_index} | ${dut_tun0_ip1} | ${prefix}
-| | ... | ${dut_node} | ${dut1_gre1_index} | ${dut_tun1_ip1} | ${prefix}
-| | Then Send GRE and check received ICMPv4 header
-| | ... | ${tg_node} | ${tg_to_dut_if2} | ${tg_to_dut_if1}
-| | ... | ${dut_to_tg_if2_mac} | ${tg_to_dut_if1_mac}
-| | ... | ${net2_host_address} | ${net1_host_address}
-| | ... | ${tun0_dst} | ${dut1_lo_address}
-| | And Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send GRE and check received ICMPv4 header |
-| | ... | ${tg_node} | ${tg_to_dut_if2} | ${tg_to_dut_if1}
-| | ... | ${dut_to_tg_if2_mac} | ${tg_to_dut_if1_mac}
-| | ... | ${net2_host_address} | ${net1_host_address}
-| | ... | ${tun0_dst} | ${dut1_ip_address}
diff --git a/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lisp-l2bdbasemaclrn-func.robot b/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lisp-l2bdbasemaclrn-func.robot
deleted file mode 100644
index 5c3ba1b1b2..0000000000
--- a/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lisp-l2bdbasemaclrn-func.robot
+++ /dev/null
@@ -1,97 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.IPUtil
-| Library | resources.libraries.python.L2Util
-| Library | resources.libraries.python.LispUtil
-| Library | resources.libraries.python.NodePath
-| Library | resources.libraries.python.topology.Topology
-| Library | resources.libraries.python.Trace
-| ...
-| Resource | resources/libraries/robot/ip/ip4.robot
-| Resource | resources/libraries/robot/overlay/l2lisp.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| ...
-# Import configuration and test data:
-| Variables | resources/test_data/lisp/l2/l2_ipv4.py
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down functional test
-| ...
-| Documentation | *ip4-lispgpe-ip4 encapsulation test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4-LISPGpe-IP4
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and static routes. LISPoIPv4 tunnel is configured between\
-| ... | DUT1 and DUT2.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in\
-| ... | both directions by TG on links to DUT1 and DUT2; on receive\
-| ... | TG verifies packets for correctness and their IPv4 src-addr, dst-addr\
-| ... | and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
-
-*** Test Cases ***
-| TC01: Route IPv4 packet through LISP with Bridge Domain setup.
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IPv4-ICMPv4-LISPGpe-IP4
-| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2. Also\
-| | ... | configure BD and assign it to LISP VNI.
-| | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces across both\
-| | ... | DUTs and LISP tunnel between them; verify IPv4, Ether headers on\
-| | ... | received packets are correct.
-| | ... | [Ref] RFC6830.
-| | ...
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Configure IP addresses on interfaces
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} | ${prefix4}
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${prefix4}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} | ${prefix4}
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} | ${prefix4}
-| | And VPP Add IP Neighbor
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4} | ${tg_to_dut2_mac}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4} | ${tg_to_dut1_mac}
-| | And VPP Add IP Neighbor | ${dut1_node}
-| | ... | ${dut1_to_dut2} | ${dut2_to_dut1_ip4} | ${dut2_to_dut1_mac}
-| | And VPP Add IP Neighbor | ${dut2_node}
-| | ... | ${dut2_to_dut1} | ${dut1_to_dut2_ip4} | ${dut1_to_dut2_mac}
-| | When Create L2 BD | ${dut1_node} | ${vpp_bd_id}
-| | And Add Interface To L2 BD | ${dut1_node} | ${dut1_to_tg} | ${vpp_bd_id}
-| | And Create L2 BD | ${dut2_node} | ${vpp_bd_id}
-| | And Add Interface To L2 BD | ${dut2_node} | ${dut2_to_tg} | ${vpp_bd_id}
-| | And Configure L2 LISP on DUT | ${dut1_node}
-| | ... | ${dut1_to_dut2_ip4_static_adjacency}
-| | ... | ${lisp_dut_settings}
-| | And Configure L2 LISP on DUT | ${dut2_node}
-| | ... | ${dut2_to_dut1_ip4_static_adjacency}
-| | ... | ${lisp_dut_settings}
-| | Then Send packet and verify headers
-| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| | ... | ${tg_to_dut1} | ${tg_if1_mac} | ${tg_if2_mac}
-| | ... | ${tg_to_dut2} | ${tg_if1_mac} | ${tg_if2_mac}
-| | And Send packet and verify headers
-| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| | ... | ${tg_to_dut2} | ${tg_if2_mac} | ${tg_if1_mac}
-| | ... | ${tg_to_dut1} | ${tg_if2_mac} | ${tg_if1_mac}
diff --git a/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip4basevrf-func.robot b/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip4basevrf-func.robot
deleted file mode 100644
index 077639eeec..0000000000
--- a/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip4basevrf-func.robot
+++ /dev/null
@@ -1,111 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.InterfaceUtil
-| Library | resources.libraries.python.IPUtil
-| Library | resources.libraries.python.NodePath
-| Library | resources.libraries.python.topology.Topology
-| Library | resources.libraries.python.Trace
-| Library | resources.libraries.python.VhostUser
-| Library | resources.libraries.python.VPPUtil
-| ...
-| Resource | resources/libraries/robot/ip/ip4.robot
-| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot
-| Resource | resources/libraries/robot/overlay/lispgpe.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| ...
-# Import configuration and test data:
-| Variables | resources/test_data/lisp/ipv4_lispgpe_ipv4/ipv4_lispgpe_ipv4.py
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down LISP functional test
-| ...
-| Documentation | *ip4-lispgpe-ip4 encapsulation test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2,\
-| ... | Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and static routes. LISPoIPv4 tunnel is configured between\
-| ... | DUT1 and DUT2.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in\
-| ... | both directions by TG on links to DUT1 and DUT2; on receive\
-| ... | TG verifies packets for correctness and their IPv4 src-addr, dst-addr\
-| ... | and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using physical interfaces and VRF is enabled
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\
-| | ... | TG-DUTn.
-| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2.
-| | ... | [Ver] Case: ip4-lispgpe-ip4 - vrf, phy2lisp
-| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\
-| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\
-| | ... | received packets are correct.
-| | ... | [Ref] RFC6830.
-| | ...
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Add Fib Table | ${dut1_node} | ${fib_table_1}
-| | And Add Fib Table | ${dut2_node} | ${fib_table_1}
-| | And Assign Interface To Fib Table | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${fib_table_1}
-| | And Assign Interface To Fib Table | ${dut2_node}
-| | ... | ${dut2_to_tg} | ${fib_table_1}
-| | And Add IP Neighbors
-| | And Configure IP addresses on interfaces
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} | ${prefix4}
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${prefix4}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} | ${prefix4}
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} | ${prefix4}
-| | When Configure LISP GPE topology in 3-node circular topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| | ... | ${dut1_to_dut2_ip4_static_adjacency}
-| | ... | ${dut2_to_dut1_ip4_static_adjacency}
-| | ... | ${dut1_dut2_vni} | ${fib_table_1}
-| | Then Send packet and verify headers
-| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers
-| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-*** Keywords ***
-| Add IP Neighbors
-| | [Documentation]
-| | ... | Add IP neighbors to physical interfaces on DUTs.
-| | ...
-| | VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4} | ${tg_to_dut1_mac}
-| | VPP Add IP Neighbor
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4} | ${tg_to_dut2_mac}
-| | VPP Add IP Neighbor | ${dut1_node}
-| | ... | ${dut1_to_dut2} | ${dut2_to_dut1_ip4} | ${dut2_to_dut1_mac}
-| | VPP Add IP Neighbor | ${dut2_node}
-| | ... | ${dut2_to_dut1} | ${dut1_to_dut2_ip4} | ${dut1_to_dut2_mac}
diff --git a/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6basevrf-func.robot b/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6basevrf-func.robot
deleted file mode 100644
index a5181b5180..0000000000
--- a/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6basevrf-func.robot
+++ /dev/null
@@ -1,113 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library  | resources.libraries.python.IPUtil
-| Library  | resources.libraries.python.Trace
-| Library | resources.libraries.python.VhostUser
-| Library  | resources.libraries.python.VPPUtil
-| ...
-| Resource | resources/libraries/robot/ip/ip4.robot
-| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot
-| Resource | resources/libraries/robot/l2/l2_traffic.robot
-| Resource | resources/libraries/robot/overlay/lispgpe.robot
-| Resource | resources/libraries/robot/overlay/lisp_static_adjacency.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| ...
-# import additional Lisp settings from resource file
-| Variables | resources/test_data/lisp/static_adjacency/lisp_static_adjacency.py
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO
-| ... | VM_ENV | HW_ENV
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down LISP functional test
-| ...
-| Documentation | *LISP static adjacency test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2,\
-| ... | Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and static routes. LISPoIPv4 tunnel is configured\
-| ... | between DUT1 and DUT2.
-| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets\
-| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive\
-| ... | TG verifies packets for correctness and their IPv6 src-addr,\
-| ... | dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using physical interfaces and VRF is enabled
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IPv4-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\
-| | ... | TG-DUTn.
-| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2.
-| | ... | [Ver] Case: ip6-lispgpe-ip4 - vrf, phy2lisp
-| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\
-| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\
-| | ... | received packets are correct.
-| | ... | [Ref] RFC6830.
-| | ...
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Add Fib Table | ${dut1_node} | ${fib_table_1} | ipv6=${TRUE}
-| | And Add Fib Table | ${dut2_node} | ${fib_table_1} | ipv6=${TRUE}
-| | And Assign Interface To Fib Table | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${fib_table_1} | ip6=${TRUE}
-| | And Assign Interface To Fib Table | ${dut2_node}
-| | ... | ${dut2_to_tg} | ${fib_table_1} | ip6=${TRUE}
-| | And Add IP Neighbors
-| | And Configure IP addresses on interfaces
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6o4}
-| | ... | ${dut_prefix6o4}
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6o4} | ${tg_prefix6o4}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6o4}
-| | ... | ${dut_prefix6o4}
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4}
-| | And Vpp All RA Suppress Link Layer | ${nodes}
-| | When Configure LISP GPE topology in 3-node circular topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
-| | ... | ${dut1_ip6o4_static_adjacency}
-| | ... | ${dut2_ip6o4_static_adjacency}
-| | ... | ${dut1_dut2_vni} | ${fib_table_1}
-| | Then Send packet and verify headers
-| | ... | ${tg_node} | ${tg1_ip6o4} | ${tg2_ip6o4}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers
-| | ... | ${tg_node} | ${tg2_ip6o4} | ${tg1_ip6o4}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-*** Keywords ***
-| Add IP Neighbors
-| | [Documentation]
-| | ... | Add IP neighbors to physical interfaces on DUTs.
-| | ...
-| | VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6o4} | ${tg_to_dut1_mac}
-| | VPP Add IP Neighbor
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6o4} | ${tg_to_dut2_mac}
-| | VPP Add IP Neighbor | ${dut1_node}
-| | ... | ${dut1_to_dut2} | ${dut2_to_dut1_ip6o4} | ${dut2_to_dut1_mac}
-| | VPP Add IP Neighbor | ${dut2_node}
-| | ... | ${dut2_to_dut1} | ${dut1_to_dut2_ip6o4} | ${dut1_to_dut2_mac}
diff --git a/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lisp-l2bdbasemaclrn-func.robot b/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lisp-l2bdbasemaclrn-func.robot
deleted file mode 100644
index df1b6c0d02..0000000000
--- a/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lisp-l2bdbasemaclrn-func.robot
+++ /dev/null
@@ -1,98 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.IPUtil
-| Library | resources.libraries.python.L2Util
-| Library | resources.libraries.python.LispUtil
-| Library | resources.libraries.python.NodePath
-| Library | resources.libraries.python.topology.Topology
-| Library | resources.libraries.python.Trace
-| ...
-| Resource | resources/libraries/robot/ip/ip4.robot
-| Resource | resources/libraries/robot/overlay/l2lisp.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| ...
-# Import configuration and test data:
-| Variables | resources/test_data/lisp/l2/l2_ipv6.py
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down functional test
-| ...
-| Documentation | *l2-lispgpe-ip6 encapsulation test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IP6-ICMPv6-LISPGpe-IP6
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge\
-| ... | domains and neighbors. LISPoIPv6 tunnel is configured between\
-| ... | DUT1 and DUT2.
-| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in\
-| ... | both directions by TG on links to DUT1 and DUT2; on receive\
-| ... | TG verifies packets for correctness and their IPv6 src-addr, dst-addr\
-| ... | and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
-
-*** Test Cases ***
-| TC01: Route IPv6 packet through LISP with Bridge Domain setup.
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IP6-ICMPv6-LISPGpe-IP6
-| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2. Also\
-| | ... | configure BD and assign it to LISP VNI.
-| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across both\
-| | ... | DUTs and LISP tunnel between them; verify IPv6, Ether headers on\
-| | ... | received packets are correct.
-| | ... | [Ref] RFC6830.
-| | ...
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Configure IP addresses on interfaces
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} | ${prefix6}
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} | ${prefix6}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} | ${prefix6}
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} | ${prefix6}
-| | VPP Add IP Neighbor
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} | ${tg_to_dut2_mac}
-| | VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} | ${tg_to_dut1_mac}
-| | VPP Add IP Neighbor | ${dut1_node}
-| | ... | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} | ${dut2_to_dut1_mac}
-| | VPP Add IP Neighbor | ${dut2_node}
-| | ... | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} | ${dut1_to_dut2_mac}
-| | And Vpp All RA Suppress Link Layer | ${nodes}
-| | When Create L2 BD | ${dut1_node} | ${vpp_bd_id}
-| | And Add Interface To L2 BD | ${dut1_node} | ${dut1_to_tg} | ${vpp_bd_id}
-| | And Create L2 BD | ${dut2_node} | ${vpp_bd_id}
-| | And Add Interface To L2 BD | ${dut2_node} | ${dut2_to_tg} | ${vpp_bd_id}
-| | And Configure L2 LISP on DUT | ${dut1_node}
-| | ... | ${dut1_to_dut2_ip6_static_adjacency}
-| | ... | ${lisp_dut_settings}
-| | And Configure L2 LISP on DUT | ${dut2_node}
-| | ... | ${dut2_to_dut1_ip6_static_adjacency}
-| | ... | ${lisp_dut_settings}
-| | Then Send packet and verify headers
-| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6}
-| | ... | ${tg_to_dut1} | ${tg_if1_mac} | ${tg_if2_mac}
-| | ... | ${tg_to_dut2} | ${tg_if1_mac} | ${tg_if2_mac}
-| | And Send packet and verify headers
-| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6}
-| | ... | ${tg_to_dut2} | ${tg_if2_mac} | ${tg_if1_mac}
-| | ... | ${tg_to_dut1} | ${tg_if2_mac} | ${tg_if1_mac}
diff --git a/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6basevrf-func.robot b/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6basevrf-func.robot
deleted file mode 100644
index 0a189e510f..0000000000
--- a/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6basevrf-func.robot
+++ /dev/null
@@ -1,113 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.IPUtil
-| Library | resources.libraries.python.NodePath
-| Library | resources.libraries.python.topology.Topology
-| Library | resources.libraries.python.Trace
-| Library | resources.libraries.python.VPPUtil
-| ...
-| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot
-| Resource | resources/libraries/robot/overlay/lispgpe.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| ...
-# Import configuration and test data:
-| Variables | resources/test_data/lisp/ipv6_lispgpe_ipv6/ipv6_lispgpe_ipv6.py
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP
-| ...
-| Test Setup | Run Keywords | Set up functional test
-| ... | AND  | Vpp All Ra Suppress Link Layer | ${nodes}
-| ...
-| Test Teardown | Tear down LISP functional test
-| ...
-| Documentation | *ip6-lispgpe-ip6 encapsulation test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv6-ICMPv6 on DUT1-DUT2,\
-| ... | Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and static routes. LISPoIPv6 tunnel is configured between\
-| ... | DUT1 and DUT2.
-| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in\
-| ... | both directions by TG on links to DUT1 and DUT2; on receive\
-| ... | TG verifies packets for correctness and their IPv6 src-addr, dst-addr\
-| ... | and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using physical interfaces and VRF is enabled
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IPv6-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\
-| | ... | TG-DUTn.
-| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2.
-| | ... | [Ver] Case: ip6-lispgpe-ip6 - vrf, phy2lisp
-| | ... | Make TG send ICMPv6 Echo Req between its interfaces across both\
-| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\
-| | ... | received packets are correct.
-| | ... | [Ref] RFC6830.
-| | ...
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Add Fib Table | ${dut1_node} | ${fib_table_1} | ipv6=${TRUE}
-| | And Add Fib Table | ${dut2_node} | ${fib_table_1} | ipv6=${TRUE}
-| | And Assign Interface To Fib Table | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${fib_table_1} | ipv6=${TRUE}
-| | And Assign Interface To Fib Table | ${dut2_node}
-| | ... | ${dut2_to_tg} | ${fib_table_1} | ipv6=${TRUE}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} | ${prefix6}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} | ${prefix6}
-| | And VPP Interface Set IP Address
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} | ${prefix6}
-| | And VPP Interface Set IP Address
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Add IP Neighbors
-| | And Vpp All RA Suppress Link Layer | ${nodes}
-| | When Configure LISP GPE topology in 3-node circular topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
-| | ... | ${dut1_to_dut2_ip6_static_adjacency}
-| | ... | ${dut2_to_dut1_ip6_static_adjacency}
-| | ... | ${dut1_dut2_vni} | ${fib_table_1}
-| | Then Send packet and verify headers
-| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers
-| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-*** Keywords ***
-| Add IP Neighbors
-| | [Documentation]
-| | ... | Add IP neighbors to physical interfaces on DUTs.
-| | ...
-| | VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} | ${tg_to_dut1_mac}
-| | VPP Add IP Neighbor
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} | ${tg_to_dut2_mac}
-| | VPP Add IP Neighbor | ${dut1_node}
-| | ... | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} | ${dut2_to_dut1_mac}
-| | VPP Add IP Neighbor | ${dut2_node}
-| | ... | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} | ${dut1_to_dut2_mac}