aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp
diff options
context:
space:
mode:
authorJan Gelety <jgelety@cisco.com>2018-04-05 08:54:44 +0200
committerTibor Frank <tifrank@cisco.com>2018-04-06 10:01:10 +0000
commit995ac8540182cecb151298a61633c202150020ce (patch)
treea63f8f8bdc0ab5111000499af037836ca52e7362 /tests/vpp
parentb7b91e6bebbc3cb984d104efc3ff1951beb9c3af (diff)
CSIT-1020: MRR Day 2 - x710
- CSIT-1029: x710 MRR tests - IP4 - ip4 -10ge2p1x710-ethip4-ip4base-copwhtlistbase-mrr.robot -10ge2p1x710-ethip4-ip4base-iacldstbase-mrr.robot -10ge2p1x710-ethip4-ip4base-ipolicemarkbase-mrr.robot -10ge2p1x710-ethip4-ip4base-mrr.robot -10ge2p1x710-ethip4-ip4scale200k-mrr.robot -10ge2p1x710-ethip4-ip4scale20k-mrr.robot -10ge2p1x710-ethip4-ip4scale2m-mrr.robot -10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-mrr.robot -10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-mrr.robot -10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-mrr.robot -10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot -10ge2p1x710-ethip4udp-ip4base-nat44-mrr.robot - 10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr.robot - ip4_tunnels -10ge2p1x710-ethip4lispip4-ip4base-mrr.robot -10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-mrr.robot - 10ge2p1x710-ethip4vxlan-l2xcbase-mrr.robot Change-Id: I141bbd8039f4a5993c77758b1c410dcbd203ab97 Signed-off-by: Jan Gelety <jgelety@cisco.com>
Diffstat (limited to 'tests/vpp')
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-mrr.robot232
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-mrr.robot237
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-mrr.robot233
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-mrr.robot221
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-mrr.robot224
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-mrr.robot224
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-mrr.robot224
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-mrr.robot243
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-mrr.robot243
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-mrr.robot243
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot243
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-mrr.robot240
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr.robot240
-rw-r--r--tests/vpp/perf/ip4/40ge2p1xl710-ethip4-ip4base-mrr.robot2
-rw-r--r--tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-mrr.robot247
-rw-r--r--tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-mrr.robot225
-rw-r--r--tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-mrr.robot225
17 files changed, 3745 insertions, 1 deletions
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-mrr.robot
new file mode 100644
index 0000000000..91e9c0f6d1
--- /dev/null
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-mrr.robot
@@ -0,0 +1,232 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Library | resources.libraries.python.Cop
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | COPWHLIST
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L3 | Intel-X710
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results IPv4 whitelist test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
+| ... | routing, two static IPv4 /24 routes and IPv4 COP security whitelist
+| ... | ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG.
+| ... | DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+# X710 bandwidth limit
+| ${s_limit}= | ${10000000000}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253
+
+*** Keywords ***
+| Check RR for ethip4-ip4base-copwhtlistbase
+| | ...
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\
+| | ... | phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${wt} | ${rxq} | ${framesize}
+| | ...
+| | # Test Variables required for test execution and test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding in 3-node circular topology
+| | And Add Fib Table | ${dut1} | 1
+| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
+| | And Add Fib Table | ${dut2} | 1
+| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE}
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ethip4-ip4base-copwhtlistbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase
+| | wt=1 | rxq=1 | framesize=${64}
+
+| tc02-1518B-1t1c-ethip4-ip4base-copwhtlistbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase
+| | wt=1 | rxq=1 | framesize=${1518}
+
+| tc03-9000B-1t1c-ethip4-ip4base-copwhtlistbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase
+| | wt=1 | rxq=1 | framesize=${9000}
+
+| tc04-IMIX-1t1c-ethip4-ip4base-copwhtlistbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase
+| | wt=1 | rxq=1 | framesize=IMIX_v4_1
+
+| tc05-64B-2t2c-ethip4-ip4base-copwhtlistbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase
+| | wt=2 | rxq=1 | framesize=${64}
+
+| tc06-1518B-2t2c-ethip4-ip4base-copwhtlistbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase
+| | wt=2 | rxq=1 | framesize=${1518}
+
+| tc07-9000B-2t2c-ethip4-ip4base-copwhtlistbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase
+| | wt=2 | rxq=1 | framesize=${9000}
+
+| tc08-IMIX-2t2c-ethip4-ip4base-copwhtlistbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase
+| | wt=2 | rxq=1 | framesize=IMIX_v4_1
+
+| tc09-64B-4t4c-ethip4-ip4base-copwhtlistbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase
+| | wt=4 | rxq=2 | framesize=${64}
+
+| tc10-1518B-4t4c-ethip4-ip4base-copwhtlistbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase
+| | wt=4 | rxq=2 | framesize=${1518}
+
+| tc11-9000B-4t4c-ethip4-ip4base-copwhtlistbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase
+| | wt=4 | rxq=2 | framesize=${9000}
+
+| tc12-IMIX-4t4c-ethip4-ip4base-copwhtlistbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase
+| | wt=4 | rxq=2 | framesize=IMIX_v4_1
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-mrr.robot
new file mode 100644
index 0000000000..51fe45f960
--- /dev/null
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-mrr.robot
@@ -0,0 +1,237 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | IACLDST
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L3 | Intel-X710
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results IPv4 iAcl whitelist test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
+| ... | routing, two static IPv4 /24 routes and IPv4 iAcl security whitelist
+| ... | ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG.
+| ... | DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\
+| ... | at line rate and reports total received/sent packets over trial period.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv6 header
+| ... | and generated payload. MAC addresses are matching MAC addresses
+| ... | of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+# X710 bandwidth limit
+| ${s_limit}= | ${10000000000}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253
+
+*** Keywords ***
+| Check RR for ethip4-ip4base-iacldstbase
+| | ...
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\
+| | ... | phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${wt} | ${rxq} | ${framesize}
+| | ...
+| | # Test Variables required for test execution and test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding in 3-node circular topology
+| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
+| | ... | ${dut1} | ip4 | dst
+| | And Vpp Configures Classify Session L3
+| | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n}
+| | ... | ip4 | dst | 20.20.20.2
+| | And Vpp Enable Input Acl Interface
+| | ... | ${dut1} | ${dut1_if1} | ip4 | ${table_idx}
+| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
+| | ... | ${dut2} | ip4 | dst
+| | And Vpp Configures Classify Session L3
+| | ... | ${dut2} | permit | ${table_idx} | ${skip_n} | ${match_n}
+| | ... | ip4 | dst | 10.10.10.2
+| | And Vpp Enable Input Acl Interface
+| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ethip4-ip4base-iacldstbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-iacldstbase
+| | wt=1 | rxq=1 | framesize=${64}
+
+| tc02-1518B-1t1c-ethip4-ip4base-iacldstbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-iacldstbase
+| | wt=1 | rxq=1 | framesize=${1518}
+
+| tc03-9000B-1t1c-ethip4-ip4base-iacldstbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 1T1C | STHREADC
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-iacldstbase
+| | wt=1 | rxq=1 | framesize=${9000}
+
+| tc04-IMIX-1t1c-ethip4-ip4base-iacldstbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-iacldstbase
+| | wt=1 | rxq=1 | framesize=IMIX_v4_1
+
+| tc05-64B-2t2c-ethip4-ip4base-iacldstbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-iacldstbase
+| | wt=2 | rxq=1 | framesize=${64}
+
+| tc06-1518B-2t2c-ethip4-ip4base-iacldstbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-iacldstbase
+| | wt=2 | rxq=1 | framesize=${1518}
+
+| tc07-9000B-2t2c-ethip4-ip4base-iacldstbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-iacldstbase
+| | wt=2 | rxq=1 | framesize=${9000}
+
+| tc08-IMIX-2t2c-ethip4-ip4base-iacldstbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-iacldstbase
+| | wt=2 | rxq=1 | framesize=IMIX_v4_1
+
+| tc09-64B-4t4c-ethip4-ip4base-iacldstbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-iacldstbase
+| | wt=4 | rxq=2 | framesize=${64}
+
+| tc10-1518B-4t4c-ethip4-ip4base-iacldstbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-iacldstbase
+| | wt=4 | rxq=2 | framesize=${1518}
+
+| tc11-9000B-4t4c-ethip4-ip4base-iacldstbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-iacldstbase
+| | wt=4 | rxq=2 | framesize=${9000}
+
+| tc12-IMIX-4t4c-ethip4-ip4base-iacldstbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-iacldstbase
+| | wt=4 | rxq=2 | framesize=IMIX_v4_1
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-mrr.robot
new file mode 100644
index 0000000000..b087096e32
--- /dev/null
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-mrr.robot
@@ -0,0 +1,233 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Library | resources.libraries.python.Policer
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X710 | IP4FWD | BASE | DOT1Q
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L3 | Intel-X710
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results IPv4 policer test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
+| ... | routing and two static IPv4 /24 route entries and policer with 2R3C
+| ... | color-aware configuration. Policer is applied on links TG - DUT1 and
+| ... | DUT2 - TG. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\
+| ... | at line rate and reports total received/sent packets over trial period.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv6 header
+| ... | and generated payload. MAC addresses are matching MAC addresses
+| ... | of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC2698.
+
+*** Variables ***
+# X710 bandwidth limit
+| ${s_limit}= | ${10000000000}
+| ${cir}= | ${100}
+| ${eir}= | ${150}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253
+
+*** Keywords ***
+| Check RR for ethip4-ip4base-ipolicemarkbase
+| | ...
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\
+| | ... | phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Find NDR or PDR for ${framesize} frames using binary search\
+| | ... | start at 10GE linerate.
+| | ...
+| | [Arguments] | ${wt} | ${rxq} | ${framesize}
+| | ...
+| | # Test Variables required for test execution and test teardown
+| | Set Test Variable | ${framesize}
+| | ${cb}= | Set Variable If
+| | ... | '${framesize}' == 'IMIX_v4_1' | ${1518} | ${framesize}
+| | Set Test Variable | ${cb}
+| | ${eb}= | Set Variable If
+| | ... | '${framesize}' == 'IMIX_v4_1' | ${1518} | ${framesize}
+| | Set Test Variable | ${eb}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding in 3-node circular topology
+| | And Initialize IPv4 policer 2r3c-'ca' in 3-node circular topology
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ethip4-ip4base-ipolicemarkbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 \
+| | ... | phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase
+| | wt=1 | rxq=1 | framesize=${64}
+
+| tc02-1518B-1t1c-ethip4-ip4base-ipolicemarkbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 \
+| | ... | phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase
+| | wt=1 | rxq=1 | framesize=${1518}
+
+| tc03-9000B-1t1c-ethip4-ip4base-ipolicemarkbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 \
+| | ... | phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase
+| | wt=1 | rxq=1 | framesize=${9000}
+
+| tc04-IMIX-1t1c-ethip4-ip4base-ipolicemarkbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 \
+| | ... | phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase
+| | wt=1 | rxq=1 | framesize=IMIX_v4_1
+
+| tc05-64B-2t2c-ethip4-ip4base-ipolicemarkbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 \
+| | ... | phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase
+| | wt=2 | rxq=1 | framesize=${64}
+
+| tc06-1518B-2t2c-ethip4-ip4base-ipolicemarkbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 \
+| | ... | phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase
+| | wt=2 | rxq=1 | framesize=${1518}
+
+| tc07-9000B-2t2c-ethip4-ip4base-ipolicemarkbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 \
+| | ... | phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase
+| | wt=2 | rxq=1 | framesize=${9000}
+
+| tc08-IMIX-2t2c-ethip4-ip4base-ipolicemarkbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threada, 2 \
+| | ... | phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase
+| | wt=2 | rxq=1 | framesize=IMIX_v4_1
+
+| tc09-64B-4t4c-ethip4-ip4base-ipolicemarkbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 threads, 4 \
+| | ... | phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase
+| | wt=4 | rxq=2 | framesize=${64}
+
+| tc10-1518B-4t4c-ethip4-ip4base-ipolicemarkbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 threads, 4 \
+| | ... | phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase
+| | wt=4 | rxq=2 | framesize=${1518}
+
+| tc11-9000B-4t4c-ethip4-ip4base-ipolicemarkbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 threads, 4 \
+| | ... | phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase
+| | wt=4 | rxq=2 | framesize=${9000}
+
+| tc12-IMIX-4t4c-ethip4-ip4base-ipolicemarkbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 threada, 4 \
+| | ... | phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase
+| | wt=4 | rxq=2 | framesize=IMIX_v4_1
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-mrr.robot
new file mode 100644
index 0000000000..a5e5fb8413
--- /dev/null
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-mrr.robot
@@ -0,0 +1,221 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | IP4BASE
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L3 | Intel-X710
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results IPv4 routing test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
+| ... | routing and two static IPv4 /24 route entries. DUT1 and DUT2 tested with
+| ... | 2p10GE NIC X710 by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+# X710 bandwidth limit
+| ${s_limit}= | ${10000000000}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253
+
+*** Keywords ***
+| Check RR for ethip4-ip4base
+| | ...
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\
+| | ... | phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${wt} | ${rxq} | ${framesize}
+| | ...
+| | # Test Variables required for test execution and test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding in 3-node circular topology
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ethip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base
+| | wt=1 | rxq=1 | framesize=${64}
+
+| tc02-1518B-1t1c-ethip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base
+| | wt=1 | rxq=1 | framesize=${1518}
+
+| tc03-9000B-1t1c-ethip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base
+| | wt=1 | rxq=1 | framesize=${9000}
+
+| tc04-IMIX-1t1c-ethip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base
+| | wt=1 | rxq=1 | framesize=IMIX_v4_1
+
+| tc05-64B-2t2c-ethip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base
+| | wt=2 | rxq=1 | framesize=${64}
+
+| tc06-1518B-2t2c-ethip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base
+| | wt=2 | rxq=1 | framesize=${1518}
+
+| tc07-9000B-2t2c-ethip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base
+| | wt=2 | rxq=1 | framesize=${9000}
+
+| tc08-IMIX-2t2c-ethip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base
+| | wt=2 | rxq=1 | framesize=IMIX_v4_1
+
+| tc09-64B-4t4c-ethip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base
+| | wt=4 | rxq=2 | framesize=${64}
+
+| tc10-1518B-4t4c-ethip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base
+| | wt=4 | rxq=2 | framesize=${1518}
+
+| tc11-9000B-4t4c-ethip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base
+| | wt=4 | rxq=2 | framesize=${9000}
+
+| tc12-IMIX-4t4c-ethip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base
+| | wt=4 | rxq=2 | framesize=IMIX_v4_1
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-mrr.robot
new file mode 100644
index 0000000000..5932a83ccf
--- /dev/null
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-mrr.robot
@@ -0,0 +1,224 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_200K
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L3 | Intel-X710
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results IPv4 routing test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
+| ... | routing and 2x100k static IPv4 /32 route entries. DUT1 and DUT2 tested
+| ... | with 2p10GE NIC X710 by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+# X710 bandwidth limit
+| ${s_limit}= | ${10000000000}
+| ${rts_per_flow}= | ${100000}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${rts_per_flow}
+
+*** Keywords ***
+| Check RR for ethip4-ip4scale200k
+| | ...
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\
+| | ... | phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${wt} | ${rxq} | ${framesize}
+| | ...
+| | # Test Variables required for test execution and test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding with scaling in 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ethip4-ip4scale200k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale200k
+| | wt=1 | rxq=1 | framesize=${64}
+
+| tc02-1518B-1t1c-ethip4-ip4scale200k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale200k
+| | wt=1 | rxq=1 | framesize=${1518}
+
+| tc03-9000B-1t1c-ethip4-ip4scale200k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale200k
+| | wt=1 | rxq=1 | framesize=${9000}
+
+| tc04-IMIX-1t1c-ethip4-ip4scale200k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale200k
+| | wt=1 | rxq=1 | framesize=IMIX_v4_1
+
+| tc05-64B-2t2c-ethip4-ip4scale200k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale200k
+| | wt=2 | rxq=1 | framesize=${64}
+
+| tc06-1518B-2t2c-ethip4-ip4scale200k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale200k
+| | wt=2 | rxq=1 | framesize=${1518}
+
+| tc07-9000B-2t2c-ethip4-ip4scale200k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale200k
+| | wt=2 | rxq=1 | framesize=${9000}
+
+| tc08-IMIX-2t2c-ethip4-ip4scale200k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale200k
+| | wt=2 | rxq=1 | framesize=IMIX_v4_1
+
+| tc09-64B-4t4c-ethip4-ip4scale200k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale200k
+| | wt=4 | rxq=2 | framesize=${64}
+
+| tc10-1518B-4t4c-ethip4-ip4scale200k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale200k
+| | wt=4 | rxq=2 | framesize=${1518}
+
+| tc11-9000B-4t4c-ethip4-ip4scale200k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale200k
+| | wt=4 | rxq=2 | framesize=${9000}
+
+| tc12-IMIX-4t4c-ethip4-ip4scale200k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale200k
+| | wt=4 | rxq=2 | framesize=IMIX_v4_1
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-mrr.robot
new file mode 100644
index 0000000000..d88bac58c5
--- /dev/null
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-mrr.robot
@@ -0,0 +1,224 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_20K
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L3 | Intel-X710
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results IPv4 routing test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
+| ... | routing and 2x100k static IPv4 /32 route entries. DUT1 and DUT2 tested
+| ... | with 2p10GE NIC X710 by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+# X710 bandwidth limit
+| ${s_limit}= | ${10000000000}
+| ${rts_per_flow}= | ${10000}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${rts_per_flow}
+
+*** Keywords ***
+| Check RR for ethip4-ip4scale20k
+| | ...
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\
+| | ... | phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${wt} | ${rxq} | ${framesize}
+| | ...
+| | # Test Variables required for test execution and test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding with scaling in 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ethip4-ip4scale20k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale20k
+| | wt=1 | rxq=1 | framesize=${64}
+
+| tc02-1518B-1t1c-ethip4-ip4scale20k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale20k
+| | wt=1 | rxq=1 | framesize=${1518}
+
+| tc03-9000B-1t1c-ethip4-ip4scale20k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale20k
+| | wt=1 | rxq=1 | framesize=${9000}
+
+| tc04-IMIX-1t1c-ethip4-ip4scale20k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale20k
+| | wt=1 | rxq=1 | framesize=IMIX_v4_1
+
+| tc05-64B-2t2c-ethip4-ip4scale20k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale20k
+| | wt=2 | rxq=1 | framesize=${64}
+
+| tc06-1518B-2t2c-ethip4-ip4scale20k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale20k
+| | wt=2 | rxq=1 | framesize=${1518}
+
+| tc07-9000B-2t2c-ethip4-ip4scale20k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale20k
+| | wt=2 | rxq=1 | framesize=${9000}
+
+| tc08-IMIX-2t2c-ethip4-ip4scale20k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale20k
+| | wt=2 | rxq=1 | framesize=IMIX_v4_1
+
+| tc09-64B-4t4c-ethip4-ip4scale20k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale20k
+| | wt=4 | rxq=2 | framesize=${64}
+
+| tc10-1518B-4t4c-ethip4-ip4scale20k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale20k
+| | wt=4 | rxq=2 | framesize=${1518}
+
+| tc11-9000B-4t4c-ethip4-ip4scale20k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale20k
+| | wt=4 | rxq=2 | framesize=${9000}
+
+| tc12-IMIX-4t4c-ethip4-ip4scale20k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale20k
+| | wt=4 | rxq=2 | framesize=IMIX_v4_1
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-mrr.robot
new file mode 100644
index 0000000000..fd8bf4586e
--- /dev/null
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-mrr.robot
@@ -0,0 +1,224 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_2M
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L3 | Intel-X710
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results IPv4 routing test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
+| ... | routing and 2x100k static IPv4 /32 route entries. DUT1 and DUT2 tested
+| ... | with 2p10GE NIC X710 by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+# X710 bandwidth limit
+| ${s_limit}= | ${10000000000}
+| ${rts_per_flow}= | ${1000000}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${rts_per_flow}
+
+*** Keywords ***
+| Check RR for ethip4-ip4scale2m
+| | ...
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\
+| | ... | phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${wt} | ${rxq} | ${framesize}
+| | ...
+| | # Test Variables required for test execution and test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding with scaling in 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ethip4-ip4scale2m-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale2m
+| | wt=1 | rxq=1 | framesize=${64}
+
+| tc02-1518B-1t1c-ethip4-ip4scale2m-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale2m
+| | wt=1 | rxq=1 | framesize=${1518}
+
+| tc03-9000B-1t1c-ethip4-ip4scale2m-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale2m
+| | wt=1 | rxq=1 | framesize=${9000}
+
+| tc04-IMIX-1t1c-ethip4-ip4scale2m-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale2m
+| | wt=1 | rxq=1 | framesize=IMIX_v4_1
+
+| tc05-64B-2t2c-ethip4-ip4scale2m-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale2m
+| | wt=2 | rxq=1 | framesize=${64}
+
+| tc06-1518B-2t2c-ethip4-ip4scale2m-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale2m
+| | wt=2 | rxq=1 | framesize=${1518}
+
+| tc07-9000B-2t2c-ethip4-ip4scale2m-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale2m
+| | wt=2 | rxq=1 | framesize=${9000}
+
+| tc08-IMIX-2t2c-ethip4-ip4scale2m-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale2m
+| | wt=2 | rxq=1 | framesize=IMIX_v4_1
+
+| tc09-64B-4t4c-ethip4-ip4scale2m-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale2m
+| | wt=4 | rxq=2 | framesize=${64}
+
+| tc10-1518B-4t4c-ethip4-ip4scale2m-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale2m
+| | wt=4 | rxq=2 | framesize=${1518}
+
+| tc11-9000B-4t4c-ethip4-ip4scale2m-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale2m
+| | wt=4 | rxq=2 | framesize=${9000}
+
+| tc12-IMIX-4t4c-ethip4-ip4scale2m-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4scale2m
+| | wt=4 | rxq=2 | framesize=IMIX_v4_1
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-mrr.robot
new file mode 100644
index 0000000000..122dcde140
--- /dev/null
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-mrr.robot
@@ -0,0 +1,243 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
+| ... | IACL | ACL1 | 10k_FLOWS
+| ...
+| Suite Setup | Run Keywords
+| ... | Set up 3-node performance topology with DUT's NIC model | L3
+| ... | Intel-X710
+| ... | AND | Set up performance test suite with ACL
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results IPv4 test cases with ACL*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
+| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
+| ... | DUT1 and DUT2 are tested with 2p10GE NIC X710 by Intel.\
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+# X710 bandwidth limit
+| ${s_limit}= | ${10000000000}
+
+# ACL test setup
+| ${acl_action}= | permit+reflect
+| ${acl_apply_type}= | input
+| ${no_hit_aces_number}= | 1
+| ${flows_per_dir}= | 10k
+
+# starting points for non-hitting ACLs
+| ${src_ip_start}= | 30.30.30.1
+| ${dst_ip_start}= | 40.40.40.1
+| ${ip_step}= | ${1}
+| ${sport_start}= | ${1000}
+| ${dport_start}= | ${1000}
+| ${port_step}= | ${1}
+| ${trex_stream1_subnet}= | 10.10.10.0/24
+| ${trex_stream2_subnet}= | 20.20.20.0/24
+
+*** Keywords ***
+| Check RR for IPv4 routing with ACLs
+| | ...
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with ${wt} thread(s),\
+| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${wt} | ${rxq} | ${framesize}
+| | ...
+| | # Test Variables required for test execution and test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | ${ip_nr}= | Set Variable | 10
+| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in 3-node circular topology
+| | ${traffic_profile}= | Set Variable | trex-sl-3n-ethip4udp-10u1000p-conc
+| | Set Test Variable | ${traffic_profile}
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=1 | rxq=1 | framesize=${64}
+
+| tc02-1518B-1t1c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=1 | rxq=1 | framesize=${1518}
+
+| tc03-9000B-1t1c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=1 | rxq=1 | framesize=${9000}
+
+| tc04-IMIX-1t1c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=1 | rxq=1 | framesize=IMIX_v4_1
+
+| tc05-64B-2t2c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=2 | rxq=1 | framesize=${64}
+
+| tc06-1518B-2t2c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=2 | rxq=1 | framesize=${1518}
+
+| tc07-9000B-2t2c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=2 | rxq=1 | framesize=${9000}
+
+| tc08-IMIX-2t2c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=2 | rxq=1 | framesize=IMIX_v4_1
+
+| tc09-64B-4t4c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=4 | rxq=2 | framesize=${64}
+
+| tc10-1518B-4t4c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=4 | rxq=2 | framesize=${1518}
+
+| tc11-9000B-4t4c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=4 | rxq=2 | framesize=${9000}
+
+| tc12-IMIX-4t4c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=4 | rxq=2 | framesize=IMIX_v4_1
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-mrr.robot
new file mode 100644
index 0000000000..580ae306b0
--- /dev/null
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-mrr.robot
@@ -0,0 +1,243 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS
+| ... | IACL | ACL1 | 10k_FLOWS
+| ...
+| Suite Setup | Run Keywords
+| ... | Set up 3-node performance topology with DUT's NIC model | L3
+| ... | Intel-X710
+| ... | AND | Set up performance test suite with ACL
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results IPv4 test cases with ACL*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
+| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
+| ... | DUT1 and DUT2 are tested with 2p10GE NIC X710 by Intel.\
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+# X710 bandwidth limit
+| ${s_limit}= | ${10000000000}
+
+# ACL test setup
+| ${acl_action}= | permit
+| ${acl_apply_type}= | input
+| ${no_hit_aces_number}= | 1
+| ${flows_per_dir}= | 10k
+
+# starting points for non-hitting ACLs
+| ${src_ip_start}= | 30.30.30.1
+| ${dst_ip_start}= | 40.40.40.1
+| ${ip_step}= | ${1}
+| ${sport_start}= | ${1000}
+| ${dport_start}= | ${1000}
+| ${port_step}= | ${1}
+| ${trex_stream1_subnet}= | 10.10.10.0/24
+| ${trex_stream2_subnet}= | 20.20.20.0/24
+
+*** Keywords ***
+| Check RR for IPv4 routing with ACLs
+| | ...
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with ${wt} thread(s),\
+| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${wt} | ${rxq} | ${framesize}
+| | ...
+| | # Test Variables required for test execution and test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | ${ip_nr}= | Set Variable | 10
+| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in 3-node circular topology
+| | ${traffic_profile}= | Set Variable | trex-sl-3n-ethip4udp-10u1000p-conc
+| | Set Test Variable | ${traffic_profile}
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=1 | rxq=1 | framesize=${64}
+
+| tc02-1518B-1t1c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=1 | rxq=1 | framesize=${1518}
+
+| tc03-9000B-1t1c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=1 | rxq=1 | framesize=${9000}
+
+| tc04-IMIX-1t1c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=1 | rxq=1 | framesize=IMIX_v4_1
+
+| tc05-64B-2t2c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=2 | rxq=1 | framesize=${64}
+
+| tc06-1518B-2t2c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=2 | rxq=1 | framesize=${1518}
+
+| tc07-9000B-2t2c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=2 | rxq=1 | framesize=${9000}
+
+| tc08-IMIX-2t2c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=2 | rxq=1 | framesize=IMIX_v4_1
+
+| tc09-64B-4t4c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=4 | rxq=2 | framesize=${64}
+
+| tc10-1518B-4t4c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=4 | rxq=2 | framesize=${1518}
+
+| tc11-9000B-4t4c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=4 | rxq=2 | framesize=${9000}
+
+| tc12-IMIX-4t4c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=4 | rxq=2 | framesize=IMIX_v4_1
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-mrr.robot
new file mode 100644
index 0000000000..11f02242e1
--- /dev/null
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-mrr.robot
@@ -0,0 +1,243 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
+| ... | IACL | ACL50 | 10k_FLOWS
+| ...
+| Suite Setup | Run Keywords
+| ... | Set up 3-node performance topology with DUT's NIC model | L3
+| ... | Intel-X710
+| ... | AND | Set up performance test suite with ACL
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results IPv4 test cases with ACL*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
+| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
+| ... | DUT1 and DUT2 are tested with 2p10GE NIC X710 by Intel.\
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+# X710 bandwidth limit
+| ${s_limit}= | ${10000000000}
+
+# ACL test setup
+| ${acl_action}= | permit+reflect
+| ${acl_apply_type}= | input
+| ${no_hit_aces_number}= | 50
+| ${flows_per_dir}= | 10k
+
+# starting points for non-hitting ACLs
+| ${src_ip_start}= | 30.30.30.1
+| ${dst_ip_start}= | 40.40.40.1
+| ${ip_step}= | ${1}
+| ${sport_start}= | ${1000}
+| ${dport_start}= | ${1000}
+| ${port_step}= | ${1}
+| ${trex_stream1_subnet}= | 10.10.10.0/24
+| ${trex_stream2_subnet}= | 20.20.20.0/24
+
+*** Keywords ***
+| Check RR for IPv4 routing with ACLs
+| | ...
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with ${wt} thread(s),\
+| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${wt} | ${rxq} | ${framesize}
+| | ...
+| | # Test Variables required for test execution and test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | ${ip_nr}= | Set Variable | 10
+| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in 3-node circular topology
+| | ${traffic_profile}= | Set Variable | trex-sl-3n-ethip4udp-10u1000p-conc
+| | Set Test Variable | ${traffic_profile}
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=1 | rxq=1 | framesize=${64}
+
+| tc02-1518B-1t1c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=1 | rxq=1 | framesize=${1518}
+
+| tc03-9000B-1t1c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=1 | rxq=1 | framesize=${9000}
+
+| tc04-IMIX-1t1c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=1 | rxq=1 | framesize=IMIX_v4_1
+
+| tc05-64B-2t2c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=2 | rxq=1 | framesize=${64}
+
+| tc06-1518B-2t2c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=2 | rxq=1 | framesize=${1518}
+
+| tc07-9000B-2t2c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=2 | rxq=1 | framesize=${9000}
+
+| tc08-IMIX-2t2c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=2 | rxq=1 | framesize=IMIX_v4_1
+
+| tc09-64B-4t4c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=4 | rxq=2 | framesize=${64}
+
+| tc10-1518B-4t4c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=4 | rxq=2 | framesize=${1518}
+
+| tc11-9000B-4t4c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=4 | rxq=2 | framesize=${9000}
+
+| tc12-IMIX-4t4c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=4 | rxq=2 | framesize=IMIX_v4_1
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot
new file mode 100644
index 0000000000..409d403dc1
--- /dev/null
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot
@@ -0,0 +1,243 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS
+| ... | IACL | ACL50 | 10k_FLOWS
+| ...
+| Suite Setup | Run Keywords
+| ... | Set up 3-node performance topology with DUT's NIC model | L3
+| ... | Intel-X710
+| ... | AND | Set up performance test suite with ACL
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results IPv4 test cases with ACL*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
+| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
+| ... | DUT1 and DUT2 are tested with 2p10GE NIC X710 by Intel.\
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+# X710 bandwidth limit
+| ${s_limit}= | ${10000000000}
+
+# ACL test setup
+| ${acl_action}= | permit
+| ${acl_apply_type}= | input
+| ${no_hit_aces_number}= | 50
+| ${flows_per_dir}= | 10k
+
+# starting points for non-hitting ACLs
+| ${src_ip_start}= | 30.30.30.1
+| ${dst_ip_start}= | 40.40.40.1
+| ${ip_step}= | ${1}
+| ${sport_start}= | ${1000}
+| ${dport_start}= | ${1000}
+| ${port_step}= | ${1}
+| ${trex_stream1_subnet}= | 10.10.10.0/24
+| ${trex_stream2_subnet}= | 20.20.20.0/24
+
+*** Keywords ***
+| Check RR for IPv4 routing with ACLs
+| | ...
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with ${wt} thread(s),\
+| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${wt} | ${rxq} | ${framesize}
+| | ...
+| | # Test Variables required for test execution and test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | ${ip_nr}= | Set Variable | 10
+| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in 3-node circular topology
+| | ${traffic_profile}= | Set Variable | trex-sl-3n-ethip4udp-10u1000p-conc
+| | Set Test Variable | ${traffic_profile}
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=1 | rxq=1 | framesize=${64}
+
+| tc02-1518B-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=1 | rxq=1 | framesize=${1518}
+
+| tc03-9000B-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=1 | rxq=1 | framesize=${9000}
+
+| tc04-IMIX-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=1 | rxq=1 | framesize=IMIX_v4_1
+
+| tc05-64B-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=2 | rxq=1 | framesize=${64}
+
+| tc06-1518B-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=2 | rxq=1 | framesize=${1518}
+
+| tc07-9000B-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=2 | rxq=1 | framesize=${9000}
+
+| tc08-IMIX-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=2 | rxq=1 | framesize=IMIX_v4_1
+
+| tc09-64B-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=4 | rxq=2 | framesize=${64}
+
+| tc10-1518B-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=4 | rxq=2 | framesize=${1518}
+
+| tc11-9000B-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=4 | rxq=2 | framesize=${9000}
+
+| tc12-IMIX-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with ACLs
+| | wt=4 | rxq=2 | framesize=IMIX_v4_1
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-mrr.robot
new file mode 100644
index 0000000000..748de0fd53
--- /dev/null
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-mrr.robot
@@ -0,0 +1,240 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Resource | resources/libraries/robot/ip/nat.robot
+| Resource | resources/libraries/robot/shared/traffic.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | BASE
+| ...
+| Suite Setup | Run Keywords
+| ... | Set up 3-node performance topology with DUT's NIC model | L3
+| ... | Intel-X710
+| ... | AND | Set up performance test suite with NAT
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *NAT44 performance test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
+| ... | routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2
+| ... | tested with 2p10GE NIC X710 by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+# X710 bandwidth limit
+| ${s_limit}= | ${10000000000}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4udp-1u1p
+
+*** Keywords ***
+| Check RR for IPv4 routing with NAT44
+| | ...
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\
+| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. NAT44 is\
+| | ... | configured between DUTs - 1 user and 1 port (session) per user.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${wt} | ${rxq} | ${framesize}
+| | ...
+| | # Test Variables required for test execution and test teardown
+| | Set Test Variable | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Add NAT to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize NAT44 in 3-node circular topology
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ethip4-ip4base-snat-1u-1p-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\
+| | ... | 1 user and 1 port (session) per user.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with NAT44
+| | wt=1 | rxq=1 | framesize=${64}
+
+| tc02-1518B-1t1c-ethip4-ip4base-snat-1u-1p-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\
+| | ... | 1 user and 1 port (session) per user.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with NAT44
+| | wt=1 | rxq=1 | framesize=${1518}
+
+| tc03-9000B-1t1c-ethip4-ip4base-snat-1u-1p-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\
+| | ... | 1 user and 1 port (session) per user.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with NAT44
+| | wt=1 | rxq=1 | framesize=${9000}
+
+| tc04-IMIX-1t1c-ethip4-ip4base-snat-1u-1p-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\
+| | ... | 1 user and 1 port (session) per user.
+| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\
+| | ... | linerate, step 50kpps.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with NAT44
+| | wt=1 | rxq=1 | framesize=IMIX_v4_1
+
+| tc05-64B-2t2c-ethip4-ip4base-snat-1u-1p-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\
+| | ... | 1 user and 1 port (session) per user.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with NAT44
+| | wt=2 | rxq=1 | framesize=${64}
+
+| tc06-1518B-2t2c-ethip4-ip4base-snat-1u-1p-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\
+| | ... | 1 user and 1 port (session) per user.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with NAT44
+| | wt=2 | rxq=1 | framesize=${1518}
+
+| tc07-9000B-2t2c-ethip4-ip4base-snat-1u-1p-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\
+| | ... | 1 user and 1 port (session) per user.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with NAT44
+| | wt=2 | rxq=1 | framesize=${9000}
+
+| tc08-IMIX-2t2c-ethip4-ip4base-snat-1u-1p-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\
+| | ... | 1 user and 1 port (session) per user.
+| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\
+| | ... | linerate, step 50kpps.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with NAT44
+| | wt=2 | rxq=1 | framesize=IMIX_v4_1
+
+| tc09-64B-4t4c-ethip4-ip4base-snat-1u-1p-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\
+| | ... | 1 user and 1 port (session) per user.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with NAT44
+| | wt=4 | rxq=2 | framesize=${64}
+
+| tc10-1518B-4t4c-ethip4-ip4base-snat-1u-1p-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\
+| | ... | 1 user and 1 port (session) per user.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with NAT44
+| | wt=4 | rxq=2 | framesize=${1518}
+
+| tc11-9000B-4t4c-ethip4-ip4base-snat-1u-1p-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\
+| | ... | 1 user and 1 port (session) per user.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with NAT44
+| | wt=4 | rxq=2 | framesize=${9000}
+
+| tc12-IMIX-4t4c-ethip4-ip4base-snat-1u-1p-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\
+| | ... | 1 user and 1 port (session) per user.
+| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\
+| | ... | linerate, step 50kpps.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with NAT44
+| | wt=4 | rxq=2 | framesize=IMIX_v4_1
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr.robot
new file mode 100644
index 0000000000..a2c81947da
--- /dev/null
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr.robot
@@ -0,0 +1,240 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Resource | resources/libraries/robot/ip/nat.robot
+| Resource | resources/libraries/robot/shared/traffic.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_1000
+| ... | SCALE
+| ...
+| Suite Setup | Run Keywords
+| ... | Set up 3-node performance topology with DUT's NIC model | L3
+| ... | Intel-X710
+| ... | AND | Set up performance test suite with NAT
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results NAT44 performance test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
+| ... | routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2
+| ... | tested with 2p10GE NIC X710 by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+# X710 bandwidth limit
+| ${s_limit}= | ${10000000000}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4udp-1000u15p
+
+*** Keywords ***
+| Check RR for IPv4 routing with NAT44
+| | ...
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\
+| | ... | phy core(s), ${rxq} receive queue(s) per NIC port.NAT44 is configured\
+| | ... | between DUTs - 1000 users and 15 ports (sessions) per user.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${wt} | ${rxq} | ${framesize}
+| | ...
+| | Set Test Variable | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Add NAT to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize NAT44 in 3-node circular topology
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\
+| | ... | 1000 users and 15 ports (sessions) per user.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with NAT44
+| | wt=1 | rxq=1 | framesize=${64}
+
+| tc02-1518B-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\
+| | ... | 1000 users and 15 ports (sessions) per user.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with NAT44
+| | wt=1 | rxq=1 | framesize=${1518}
+
+| tc03-9000B-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\
+| | ... | 1000 users and 15 ports (sessions) per user.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with NAT44
+| | wt=1 | rxq=1 | framesize=${9000}
+
+| tc04-IMIX-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\
+| | ... | 1000 users and 15 ports (sessions) per user.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with NAT44
+| | wt=1 | rxq=1 | framesize=IMIX_v4_1
+
+| tc05-64B-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\
+| | ... | 1000 users and 15 ports (sessions) per user.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with NAT44
+| | wt=2 | rxq=1 | framesize=${64}
+
+| tc06-1518B-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\
+| | ... | 1000 users and 15 ports (sessions) per user.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with NAT44
+| | wt=2 | rxq=1 | framesize=${1518}
+
+| tc07-9000B-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\
+| | ... | 1000 users and 15 ports (sessions) per user.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with NAT44
+| | wt=2 | rxq=1 | framesize=${9000}
+
+| tc08-IMIX-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\
+| | ... | 1000 users and 15 ports (sessions) per user.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with NAT44
+| | wt=2 | rxq=1 | framesize=IMIX_v4_1
+
+| tc09-64B-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\
+| | ... | 1000 users and 15 ports (sessions) per user.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with NAT44
+| | wt=4 | rxq=2 | framesize=${64}
+
+| tc10-1518B-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\
+| | ... | 1000 users and 15 ports (sessions) per user.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with NAT44
+| | wt=4 | rxq=2 | framesize=${1518}
+
+| tc11-9000B-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\
+| | ... | 1000 users and 15 ports (sessions) per user.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with NAT44
+| | wt=4 | rxq=2 | framesize=${9000}
+
+| tc12-IMIX-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\
+| | ... | 1000 users and 15 ports (sessions) per user.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv4 routing with NAT44
+| | wt=4 | rxq=2 | framesize=IMIX_v4_1
diff --git a/tests/vpp/perf/ip4/40ge2p1xl710-ethip4-ip4base-mrr.robot b/tests/vpp/perf/ip4/40ge2p1xl710-ethip4-ip4base-mrr.robot
index ee6288ec3d..8c779915f8 100644
--- a/tests/vpp/perf/ip4/40ge2p1xl710-ethip4-ip4base-mrr.robot
+++ b/tests/vpp/perf/ip4/40ge2p1xl710-ethip4-ip4base-mrr.robot
@@ -31,7 +31,7 @@
| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
| ... | routing and two static IPv4 /24 route entries. DUT1 and DUT2 tested with
-| ... | 2p10GE NIC X710 Niantic by Intel.
+| ... | 2p10GE NIC XL710 by Intel.
| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
| ... | at line rate and reports total received/sent packets over trial period.
| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-mrr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-mrr.robot
new file mode 100644
index 0000000000..47bae0ed03
--- /dev/null
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-mrr.robot
@@ -0,0 +1,247 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Resource | resources/libraries/robot/overlay/lisp_static_adjacency.robot
+| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X710 | IP4FWD | ENCAP | LISP | IP4UNRLAY | IP4OVRLAY
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L3 | Intel-X710
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results Lisp test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4 on DUT1-DUT2,\
+| ... | Eth-IPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
+| ... | routing and static routes. LISPoIPv4 tunnel is configured between DUT1\
+| ... | and DUT2. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC6830.
+
+*** Variables ***
+# X710 bandwidth limit
+| ${s_limit}= | ${10000000000}
+| ${lisp_overhead}= | ${8}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253
+
+*** Keywords ***
+| Check RR for ethip4lispip4-ip4base
+| | ...
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters\
+| | ... | config with ${wt} thread(s), ${wt} phy core(s), ${rxq} receive\
+| | ... | queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${wt} | ${rxq} | ${framesize}
+| | ...
+| | # Test Variables required for test execution and test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit}
+| | ... | ${get_framesize + ${lisp_overhead}}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize + ${lisp_overhead}} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize LISP IPv4 forwarding in 3-node circular topology
+| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
+| | ... | ${dut2_to_tg_ip4} | ${prefix4}
+| | And Configure LISP topology in 3-node circular topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
+| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ethip4lispip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\
+| | ... | filters config with 1 thread, 1 phy core, 1 receive queue per NIC\
+| | ... | port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4lispip4-ip4base
+| | wt=1 | rxq=1 | framesize=${64}
+
+| tc02-1480B-1t1c-ethip4lispip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\
+| | ... | filters config with 1 thread, 1 phy core, 1 receive queue per NIC\
+| | ... | port.
+| | ... | [Ver] Measure MaxReceivedRate for 1480B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1480B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4lispip4-ip4base
+| | wt=1 | rxq=1 | framesize=${1480}
+
+| tc03-9000B-1t1c-ethip4lispip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\
+| | ... | filters config with 1 thread, 1 phy core, 1 receive queue per NIC\
+| | ... | port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4lispip4-ip4base
+| | wt=1 | rxq=1 | framesize=${9000}
+
+| tc04-IMIX-1t1c-ethip4lispip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\
+| | ... | filters config with 1 thread, 1 phy core, 1 receive queue per NIC\
+| | ... | port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4lispip4-ip4base
+| | wt=1 | rxq=1 | framesize=IMIX_v4_1
+
+| tc05-64B-2t2c-ethip4lispip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\
+| | ... | filters config with 2 threads, 2 phy cores, 1 receive queue per NIC\
+| | ... | port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 2T2C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4lispip4-ip4base
+| | wt=2 | rxq=1 | framesize=${64}
+
+| tc06-1480B-2t2c-ethip4lispip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\
+| | ... | filters config with 2 threads, 2 phy cores, 1 receive queue per NIC\
+| | ... | port.
+| | ... | [Ver] Measure MaxReceivedRate for 1480B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1480B | 2T2C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4lispip4-ip4base
+| | wt=2 | rxq=1 | framesize=${1480}
+
+| tc07-9000B-2t2c-ethip4lispip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\
+| | ... | filters config with 2 threads, 2 phy cores, 1 receive queue per NIC\
+| | ... | port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 2T2C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4lispip4-ip4base
+| | wt=2 | rxq=1 | framesize=${9000}
+
+| tc08-IMIX-2t2c-ethip4lispip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\
+| | ... | filters config with 2 threads, 2 phy cores, 1 receive queue per NIC\
+| | ... | port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4lispip4-ip4base
+| | wt=2 | rxq=1 | framesize=IMIX_v4_1
+
+| tc09-64B-4t4c-ethip4lispip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\
+| | ... | filters config with 4 threads, 4 phy cores, 2 receive queues per NIC\
+| | ... | port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 4T4C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4lispip4-ip4base
+| | wt=4 | rxq=2 | framesize=${64}
+
+| tc10-1480B-4t4c-ethip4lispip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\
+| | ... | filters config with 4 threads, 4 phy cores, 2 receive queues per NIC\
+| | ... | port.
+| | ... | [Ver] Measure MaxReceivedRate for 1480B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1480B | 4T4C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4lispip4-ip4base
+| | wt=4 | rxq=2 | framesize=${1480}
+
+| tc11-9000B-4t4c-ethip4lispip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\
+| | ... | filters config with 4 threads, 4 phy cores, 2 receive queues per NIC\
+| | ... | port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 4T4C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4lispip4-ip4base
+| | wt=4 | rxq=2 | framesize=${9000}
+
+| tc12-IMIX-4t4c-ethip4lispip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\
+| | ... | filters config with 4 threads, 4 phy cores, 2 receive queues per NIC\
+| | ... | port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4lispip4-ip4base
+| | wt=4 | rxq=2 | framesize=IMIX_v4_1
diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-mrr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-mrr.robot
new file mode 100644
index 0000000000..3417e48403
--- /dev/null
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-mrr.robot
@@ -0,0 +1,225 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L2 | Intel-X710
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results L2BD with VXLANoIPv4 test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain on TG-DUTn.
+| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge
+| ... | domain. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2.
+| ... | DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+
+*** Variables ***
+# X710 bandwidth limit
+| ${s_limit}= | ${10000000000}
+| ${vxlan_overhead}= | ${50}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
+
+*** Keywords ***
+| Check RR for ethip4vxlan-l2bdbasemaclrn
+| | ...
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD forwarding config with ${wt} thread(s), ${wt}\
+| | ... | phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${wt} | ${rxq} | ${framesize}
+| | ...
+| | # Test Variables required for test execution and test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit}
+| | ... | ${get_framesize + ${vxlan_overhead}}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize + ${vxlan_overhead}} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD forwarding config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn
+| | wt=1 | rxq=1 | framesize=${64}
+
+| tc02-1518B-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD forwarding config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn
+| | wt=1 | rxq=1 | framesize=${1518}
+
+| tc03-9000B-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD forwarding config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ...
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn
+| | wt=1 | rxq=1 | framesize=${9000}
+
+| tc04-IMIX-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD forwarding config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn
+| | wt=1 | rxq=1 | framesize=IMIX_v4_1
+
+| tc05-64B-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD forwarding config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn
+| | wt=2 | rxq=1 | framesize=${64}
+
+| tc06-1518B-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD forwarding config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD | SKIP_PATCH
+| | ...
+| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn
+| | wt=2 | rxq=1 | framesize=${1518}
+
+| tc07-9000B-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD forwarding config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ...
+| | [Tags] | 9000B | 2T2C | MTHREAD | SKIP_PATCH
+| | ...
+| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn
+| | wt=2 | rxq=1 | framesize=${9000}
+
+| tc08-IMIX-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD forwarding config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn
+| | wt=2 | rxq=1 | framesize=IMIX_v4_1
+
+| tc09-64B-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD forwarding config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn
+| | wt=4 | rxq=2 | framesize=${64}
+
+| tc10-1518B-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD forwarding config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Tags] | 1518B | 4T4C | MTHREAD | SKIP_PATCH
+| | ...
+| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn
+| | wt=4 | rxq=2 | framesize=${1518}
+
+| tc11-9000B-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD forwarding config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ...
+| | [Tags] | 9000B | 4T4C | MTHREAD | SKIP_PATCH
+| | ...
+| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn
+| | wt=4 | rxq=2 | framesize=${9000}
+
+| tc12-IMIX-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD forwarding config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn
+| | wt=4 | rxq=2 | framesize=IMIX_v4_1
diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-mrr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-mrr.robot
new file mode 100644
index 0000000000..982e7745ad
--- /dev/null
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-mrr.robot
@@ -0,0 +1,225 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X710 | L2XCFWD | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L2 | Intel-X710
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results L2XC with VXLANoIPv4 test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross-connect on TG-DUTn.
+| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
+| ... | connect. VXLAN tunnels are configured between L2XCs on DUT1 and DUT2.
+| ... | DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+
+*** Variables ***
+# X710 bandwidth limit
+| ${s_limit}= | ${10000000000}
+| ${vxlan_overhead}= | ${50}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
+
+*** Keywords ***
+| Check RR for ethip4vxlan-l2xcbase
+| | ...
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC forwarding config with ${wt} thread(s), ${wt}\
+| | ... | phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${wt} | ${rxq} | ${framesize}
+| | ...
+| | # Test Variables required for test execution and test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit}
+| | ... | ${get_framesize + ${vxlan_overhead}}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize + ${vxlan_overhead}} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ethip4vxlan-l2xcbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4vxlan-l2xcbase
+| | wt=1 | rxq=1 | framesize=${64}
+
+| tc02-1518B-1t1c-ethip4vxlan-l2xcbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4vxlan-l2xcbase
+| | wt=1 | rxq=1 | framesize=${1518}
+
+| tc03-9000B-1t1c-ethip4vxlan-l2xcbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4vxlan-l2xcbase
+| | wt=1 | rxq=1 | framesize=${9000}
+
+| tc04-IMIX-1t1c-ethip4vxlan-l2xcbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4vxlan-l2xcbase
+| | wt=1 | rxq=1 | framesize=IMIX_v4_1
+
+| tc05-64B-2t2c-ethip4vxlan-l2xcbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC forwarding config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4vxlan-l2xcbase
+| | wt=2 | rxq=1 | framesize=${64}
+
+| tc06-1518B-2t2c-ethip4vxlan-l2xcbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC forwarding config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4vxlan-l2xcbase
+| | wt=2 | rxq=1 | framesize=${1518}
+
+| tc07-9000B-2t2c-ethip4vxlan-l2xcbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC forwarding config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4vxlan-l2xcbase
+| | wt=2 | rxq=1 | framesize=${9000}
+
+| tc08-IMIX-2t2c-ethip4vxlan-l2xcbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC forwarding config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4vxlan-l2xcbase
+| | wt=2 | rxq=1 | framesize=IMIX_v4_1
+
+| tc09-64B-4t4c-ethip4vxlan-l2xcbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC forwarding config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4vxlan-l2xcbase
+| | wt=4 | rxq=2 | framesize=${64}
+
+| tc10-1518B-4t4c-ethip4vxlan-l2xcbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC forwarding config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4vxlan-l2xcbase
+| | wt=4 | rxq=2 | framesize=${1518}
+
+| tc11-9000B-4t4c-ethip4vxlan-l2xcbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC forwarding config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4vxlan-l2xcbase
+| | wt=4 | rxq=2 | framesize=${9000}
+
+| tc12-IMIX-4t4c-ethip4vxlan-l2xcbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC forwarding config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4vxlan-l2xcbase
+| | wt=4 | rxq=2 | framesize=IMIX_v4_1