Add Honeycomb VxLAN test suite

JIRA: CSIT-47

 - add test suite for VxLAN management through Honeycomb
 - add keywords required for VxLAN management tests
 - add resource file with additional variables for testing
 - increment bridge domain test suite index

Change-Id: Ica0d7ae15f5b7058832a944d5ca0c72026ba299c
Signed-off-by: selias <samelias@cisco.com>

4 files changed, 130 insertions, 11 deletions

diff --git a/tests/suites/honeycomb/1 - interface_management.robot b/tests/suites/honeycomb/1 - interface_management.robot
index ae4fec9685..e320c46f60 100644
--- a/tests/suites/honeycomb/1 - interface_management.robot
+++ b/tests/suites/honeycomb/1 - interface_management.robot
@@ -95,14 +95,3 @@
 | | ... | ${node} | ${interface} | ${ethernet} | ${routing}
 | | And Interface ethernet and routing configuration from VAT should be
 | | ... | ${node} | ${interface} | ${ethernet['mtu']} | ${routing['vrf-id']}
-
-| Honeycomb modifies interface configuration - VxLAN
-| | [Documentation] | Check if Honeycomb API can configure interface VxLAN \
-| | ... | settings.
-| | [Tags] | honeycomb_sanity
-| | When Honeycomb sets interface VxLAN configuration
-| | ... | ${node} | ${interface} | &{vxlan_settings}
-| | Then VxLAN configuration from Honeycomb should be
-| | ... | ${node} | ${interface} | &{vxlan_settings}
-| | And VxLAN configuration from VAT should be
-| | ... | ${node} | ${interface} | &{vxlan_settings}
diff --git a/tests/suites/honeycomb/2 - vxlan.robot b/tests/suites/honeycomb/2 - vxlan.robot
new file mode 100644
index 0000000000..c1dee35102
--- /dev/null
+++ b/tests/suites/honeycomb/2 - vxlan.robot
@@ -0,0 +1,100 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Variables ***
+# Node and interfaces to run tests on.
+| ${node}= | ${nodes['DUT1']}
+| ${interface}= | ${node['interfaces'].values()[0]['name']}
+| ${vx_interface}= | vx_tunnel_test
+# Configuration which will be set and verified during tests.
+| &{vxlan_settings}= | src=192.168.0.2 | dst=192.168.0.3 | vni=${88}
+| ... | encap-vrf-id=${0}
+| &{vxlan_settings2}= | src=192.168.0.4 | dst=192.168.0.5 | vni=${47}
+| ... | encap-vrf-id=${0}
+| &{vxlan_settings_ipv6}= | src=10::10 | dst=10::11 | vni=${88}
+| ... | encap-vrf-id=${0}
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
+| Resource | resources/libraries/robot/honeycomb/interfaces.robot
+| Resource | resources/libraries/robot/honeycomb/vxlan.robot
+# import additional VxLAN settings from resource file
+| Variables | tests/suites/honeycomb/resources/vxlan.py
+| Documentation | *Honeycomb VxLAN management test suite.*
+| ...
+| ... | Test suite uses the first interface of the first DUT node.
+
+*** Test Cases ***
+| Honeycomb configures VxLAN tunnel
+| | [Documentation] | Check if Honeycomb API can configure VxLAN settings.
+| | [Tags] | honeycomb_sanity
+| | Given VxLAN configuration from Honeycomb should be empty
+| | ... | ${node} | ${vx_interface}
+| | When Honeycomb sets interface VxLAN configuration
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings}
+| | Then VxLAN configuration from Honeycomb should be
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings}
+| | And VxLAN configuration from VAT should be
+| | ... | ${node} | ${vxlan_settings}
+
+| Honeycomb disables VxLAN tunnel
+| | [Documentation] | Check if Honeycomb API can reset VxLAN configuration.
+| | [Tags] | honeycomb_sanity
+| | Given VxLAN configuration from Honeycomb should be
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings}
+| | When Honeycomb removes VxLAN tunnel settings | ${node} | ${vx_interface}
+| | Then VxLAN configuration from Honeycomb should be empty
+| | ... | ${node} | ${vx_interface}
+| | And VxLAN configuration from VAT should be empty | ${node}
+
+| Honeycomb does not set VxLAN configuration on another interface type
+| | [Documentation] | Check if Honeycomb API prevents setting VxLAN\
+| | ... | on incorrect interface.
+| | [Tags] | honeycomb_sanity
+| | Given VxLAN configuration from Honeycomb should be empty
+| | ... | ${node} | ${interface}
+| | And VxLAN configuration from VAT should be empty | ${node}
+| | When Honeycomb fails setting VxLan on different interface type
+| | ... | ${node} | ${interface} | ${vxlan_settings2}
+| | Then VxLAN configuration from Honeycomb should be empty
+| | ... | ${node} | ${interface}
+| | And VxLAN configuration from VAT should be empty
+| | ... | ${node}
+
+| Honeycomb does not set invalid VxLAN configuration
+| | [Documentation] | Check if Honeycomb API prevents setting incorrect VxLAN\
+| | ... | settings.
+| | [Tags] | honeycomb_sanity
+| | Given VxLAN configuration from Honeycomb should be empty
+| | ... | ${node} | ${vx_interface}
+| | And VxLAN configuration from VAT should be empty | ${node}
+| | When Honeycomb fails setting invalid VxLAN configuration
+| | ... | ${node} | ${vx_interface} | ${vxlan_invalid}
+| | Then VxLAN configuration from Honeycomb should be empty
+| | ... | ${node} | ${vx_interface}
+
+| Honeycomb configures VxLAN tunnel with ipv6
+| | [Documentation] | Check if Honeycomb API can configure VxLAN with\
+| | ... | ipv6 settings.
+| | [Tags] | honeycomb_sanity
+| | Given VxLAN configuration from Honeycomb should be empty
+| | ... | ${node} | ${vx_interface}
+| | And VxLAN configuration from VAT should be empty | ${node}
+| | When Honeycomb sets interface VxLAN configuration
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings_ipv6}
+| | Then VxLAN configuration from Honeycomb should be
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings_ipv6}
+| | And VxLAN configuration from VAT should be
+| | ... | ${node} | ${vxlan_settings_ipv6}
+
diff --git a/tests/suites/honeycomb/2 - bridge_domain.robot b/tests/suites/honeycomb/3 - bridge_domain.robot
index 8b75888275..71774fed46 100644
--- a/tests/suites/honeycomb/2 - bridge_domain.robot
+++ b/tests/suites/honeycomb/3 - bridge_domain.robot
@@ -12,9 +12,11 @@
 # limitations under the License.
 
 *** Variables ***
+# Node and interfaces to run tests on.
 | ${node}= | ${nodes['DUT1']}
 | @{interfaces}= | ${node['interfaces'].values()[0]['name']}
 | ... | ${node['interfaces'].values()[1]['name']}
+# Configuration which will be set and verified during tests.
 | ${bd1_name}= | bd-01
 | ${bd2_name}= | bd-02
 | &{bd_settings}= | flood=${True} | forward=${True} | learn=${True}
diff --git a/tests/suites/honeycomb/resources/vxlan.py b/tests/suites/honeycomb/resources/vxlan.py
new file mode 100644
index 0000000000..43307aa61a
--- /dev/null
+++ b/tests/suites/honeycomb/resources/vxlan.py
@@ -0,0 +1,28 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Test variables for Honeycomb VxLAN management test suite."""
+
+# invalid VxLAN settings
+vxlan_invalid = [
+    # same source and destination IPs
+    {'src': '192.168.0.2', 'dst': '192.168.0.2', 'vni': 88, 'encap-vrf-id': 0},
+    # missing source
+    {'dst': '192.168.0.2', 'vni': 88, 'encap-vrf-id': 0},
+    # missing destination
+    {'src': '192.168.0.2', 'vni': 88, 'encap-vrf-id': 0},
+    # missing vni
+    {'src': '192.168.0.2', 'dst': '192.168.0.3', 'encap-vrf-id': 0},
+    # missing encap id
+    {'src': '192.168.0.2', 'dst': '192.168.0.3', 'vni': 88}
+]