diff options
author | Peter Mikus <pmikus@cisco.com> | 2019-11-11 16:14:32 +0000 |
---|---|---|
committer | Peter Mikus <pmikus@cisco.com> | 2019-11-19 06:43:59 +0000 |
commit | e7ad66f3147662973039caaac33015de7e0c6f8c (patch) | |
tree | 809a056325425bad672a8a9274c3c2d696a35030 /tests | |
parent | 20cc67d5f23a7f4e05b08012bf3d3a63be4bcf63 (diff) |
HONEYCOMB: Remove
Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I60d80564050cb786c7b1e0a08f31f8292f82197e
Diffstat (limited to 'tests')
32 files changed, 0 insertions, 6019 deletions
diff --git a/tests/honeycomb/func/__init__.robot b/tests/honeycomb/func/__init__.robot deleted file mode 100644 index edb354cfe6..0000000000 --- a/tests/honeycomb/func/__init__.robot +++ /dev/null @@ -1,37 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables*** -# Honeycomb node to run tests on. -| ${node}= | ${nodes['DUT1']} - -*** Settings *** -| Library | resources.libraries.python.SetupFramework -| Library | resources.libraries.python.SetupFramework.CleanupFramework -| Library | resources/libraries/python/honeycomb/HcPersistence.py -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| ... -| Suite Setup | Run Keywords | Setup Framework | ${nodes} | AND -| ... | Restart Vpp Service On All Duts | ${nodes} | AND -| ... | Verify Vpp On All Duts | ${nodes} | AND -| ... | VPP Enable Traces On All Duts | ${nodes} | AND -| ... | Update All Interface Data On All Nodes | ${nodes} | AND -| ... | Set Global Variable | ${node} | AND -| ... | Stop Honeycomb service on DUTs | ${node} | AND -| ... | Clear Honeycomb Log | ${node} -| ... -| Suite Teardown | Run Keywords | Archive Honeycomb logs | ${node} | AND -| ... | Cleanup Framework | ${nodes} diff --git a/tests/honeycomb/func/mgmt-cfg-acl-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-acl-apihc-apivat-func.robot deleted file mode 100644 index 86e8788044..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-acl-apihc-apivat-func.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables *** -# Interface to run tests on. -| ${interface}= | ${node['interfaces']['port1']['name']} - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/access_control_lists.robot -| Variables | resources/test_data/honeycomb/acl.py -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Documentation | *Honeycomb access control lists test suite.* -| ... -| Force Tags | HC_FUNC - -*** Test Cases *** -| TC01: Honeycomb can create ACL classify table -| | [Documentation] | Check if Honeycomb API can create an ACL table. -| | ... -| | Given ACL table from Honeycomb should not exist -| | ... | ${node} | ${hc_acl_table['name']} -| | And ACL table from VAT should not exist -| | ... | ${node} | ${table_index} -| | When Honeycomb creates ACL table -| | ... | ${node} | ${hc_acl_table} -| | Then ACL table from Honeycomb should be | ${node} | ${hc_acl_table_oper} -| | And ACL table from VAT should be -| | ... | ${node} | ${table_index} | ${vat_acl_table} - -| TC02: Honeycomb can remove ACL table -| | [Documentation] | Check if Honeycomb API can delete an ACL table. -| | ... -| | Given ACL table from Honeycomb should be | ${node} | ${hc_acl_table_oper} -| | And ACL table from VAT should be -| | ... | ${node} | ${table_index} | ${vat_acl_table} -| | When Honeycomb removes ACL table | ${node} | ${hc_acl_table['name']} -| | Then ACL table from Honeycomb should not exist -| | ... | ${node} | ${hc_acl_table['name']} -| | And ACL table from VAT should not exist -| | ... | ${node} | ${table_index} - -| TC03: Honeycomb manages more than one ACL table -| | [Documentation] | Check if Honeycomb API can create another ACL table. -| | ... -| | Given ACL table from Honeycomb should not exist -| | ... | ${node} | ${hc_acl_table['name']} -| | And ACL table from VAT should not exist -| | ... | ${node} | ${table_index} -| | When Honeycomb creates ACL table | ${node} | ${hc_acl_table} -| | And Honeycomb creates ACL table | ${node} | ${hc_acl_table2} -| | Then ACL table from Honeycomb should be | ${node} | ${hc_acl_table_oper} -| | And ACL table from VAT should be -| | ... | ${node} | ${table_index} | ${vat_acl_table} -| | And ACL table from Honeycomb should be | ${node} | ${hc_acl_table2_oper} -| | And ACL table from VAT should be -| | ... | ${node} | ${table_index2} | ${vat_acl_table2} - -| TC04: Honeycomb can add ACL session to table -| | [Documentation] | Check if Honeycomb API can add an ACL session to a table. -| | ... -| | Given ACL table from Honeycomb should be | ${node} | ${hc_acl_table_oper} -| | And ACL table from VAT should be -| | ... | ${node} | ${table_index} | ${vat_acl_table} -| | When Honeycomb adds ACL session -| | ... | ${node} | ${hc_acl_table['name']} | ${hc_acl_session} -| | Then ACL session from Honeycomb should be -| | ... | ${node} | ${hc_acl_table['name']} | ${hc_acl_session} -| | And ACL session from PAPI should be -| | ... | ${node} | ${table_index} | ${vat_acl_session} - -| TC05: Honeycomb can remove ACL session -| | [Documentation] | Check if Honeycomb API can remove an ACL session. -| | ... -| | Given ACL session from Honeycomb should be -| | ... | ${node} | ${hc_acl_table['name']} | ${hc_acl_session} -| | And ACL session from PAPI should be -| | ... | ${node} | ${table_index} | ${vat_acl_session} -| | When Honeycomb removes ACL session -| | ... | ${node} | ${hc_acl_table['name']} | ${hc_acl_session['match']} -| | Then ACL session from Honeycomb should not exist -| | ... | ${node} | ${hc_acl_table['name']} | ${hc_acl_session['match']} -| | And ACL session from PAPI should not exist -| | ... | ${node} | ${table_index} - -| TC06: Honeycomb manages more than one ACL session on one table -| | [Documentation] | Check if Honeycomb API can add another ACL session\ -| | ... | to a table. -| | ... -| | Given ACL session from Honeycomb should not exist -| | ... | ${node} | ${hc_acl_table['name']} | ${hc_acl_session['match']} -| | And ACL session from PAPI should not exist -| | ... | ${node} | ${table_index} -| | When Honeycomb adds ACL session -| | ... | ${node} | ${hc_acl_table['name']} | ${hc_acl_session} -| | And Honeycomb adds ACL session -| | ... | ${node} | ${hc_acl_table['name']} | ${hc_acl_session2} -| | Then ACL session from Honeycomb should be -| | ... | ${node} | ${hc_acl_table['name']} | ${hc_acl_session} -| | And ACL session from PAPI should be -| | ... | ${node} | ${table_index} | ${vat_acl_session} -| | And ACL session from Honeycomb should be -| | ... | ${node} | ${hc_acl_table['name']} | ${hc_acl_session2} -| | And ACL session from PAPI should be -| | ... | ${node} | ${table_index} | ${vat_acl_session2} - -| TC07: Honeycomb enables ACL on interface -| | [Documentation] | Check if Honeycomb API can enable ACL on an interface. -| | ... -| | Given ACL table from Honeycomb should be | ${node} | ${hc_acl_table_oper} -| | And ACL table from VAT should be -| | ... | ${node} | ${table_index} | ${vat_acl_table} -| | And ACL session from Honeycomb should be -| | ... | ${node} | ${hc_acl_table['name']} | ${hc_acl_session} -| | And ACL session from PAPI should be -| | ... | ${node} | ${table_index} | ${vat_acl_session} -| | When Honeycomb enables ACL on interface -| | ... | ${node} | ${interface} | ${hc_acl_table['name']} -| | Then Interface ACL configuration from Honeycomb should be -| | ... | ${node} | ${interface} | ${hc_acl_table['name']} -| | And Interface ACL configuration from VAT should be -| | ... | ${node} | ${interface} | ${table_index} - -| TC08: Honeycomb disables ACL on interface -| | [Documentation] | Check if Honeycomb API can disable ACL on an interface. -| | ... -| | Given Interface ACL configuration from Honeycomb should be -| | ... | ${node} | ${interface} | ${hc_acl_table['name']} -| | And Interface ACL configuration from VAT should be -| | ... | ${node} | ${interface} | ${table_index} -| | When Honeycomb disables ACL on interface | ${node} | ${interface} -| | Then Interface ACL configuration from Honeycomb should be empty -| | ... | ${node} | ${interface} -| | And Interface ACL configuration from VAT should be empty -| | ... | ${node} | ${interface} - -| TC09: Honeycomb can remove one out of multiple ACL tables -| | [Documentation] | Check if Honeycomb API can delete an ACL table if more\ -| | ... | than one table exists. -| | ... -| | Given ACL table from Honeycomb should be | ${node} | ${hc_acl_table_oper} -| | And ACL table from VAT should be -| | ... | ${node} | ${table_index} | ${vat_acl_table} -| | And ACL table from Honeycomb should be | ${node} | ${hc_acl_table2_oper} -| | And ACL table from VAT should be -| | ... | ${node} | ${table_index2} | ${vat_acl_table2} -| | When Honeycomb removes ACL table | ${node} | ${hc_acl_table2['name']} -| | Then ACL table from Honeycomb should be | ${node} | ${hc_acl_table_oper} -| | And ACL table from VAT should be -| | ... | ${node} | ${table_index} | ${vat_acl_table} -| | And ACL table from Honeycomb should not exist -| | ... | ${node} | ${hc_acl_table2['name']} -| | And ACL table from VAT should not exist -| | ... | ${node} | ${table_index2} diff --git a/tests/honeycomb/func/mgmt-cfg-apihcv6-func.robot b/tests/honeycomb/func/mgmt-cfg-apihcv6-func.robot deleted file mode 100644 index ceefd3ce1e..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-apihcv6-func.robot +++ /dev/null @@ -1,180 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables *** -# IP addresses for IPv6 link -| ${tg_to_dut_if2_ip}= | fd00:1234::1 -| ${dut_to_tg_if2_ip}= | fd00:1234::2 -| ${ipv6_prefix}= | ${64} -# Configuration which will be set and verified during tests. -| ${bd1_name}= | bd-01 -| ${bd2_name}= | bd-02 -| &{bd_settings}= | flood=${True} | forward=${True} | learn=${True} -| ... | unknown-unicast-flood=${True} | arp-termination=${True} -| &{if_settings}= | split_horizon_group=${1} | bvi=${False} -| &{if_settings2}= | split_horizon_group=${2} | bvi=${True} -| ${vhost_interface}= | test_vhost -| &{vhost_user_server}= | socket=/tmp/soc1 | role=server -| &{vhost_user_server_edit_1}= | socket=/tmp/soc12 | role=server -| &{vhost_user_server_edit_2}= | socket=/tmp/soc12 | role=client - -*** Settings *** -| Library | resources.libraries.python.honeycomb.IPv6Management -| Library | resources.libraries.python.VPPUtil -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot -| Resource | resources/libraries/robot/honeycomb/ipv6_control.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/honeycomb/netconf.robot -| Resource | resources/libraries/robot/honeycomb/vhost_user.robot -| Variables | resources/test_data/honeycomb/netconf/triggers.py -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Run Keywords -| ... | Unconfigure IPv6 Management Interface | AND -| ... | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Force Tags | HC_FUNC | HC_REST_ONLY -| ... -| Documentation | *Honeycomb IPv6 control interface test suite.* - -*** Test Cases *** -| TC01: Honeycomb sets up l2 bridge domain -| | [Documentation] | Check if Honeycomb can create bridge domains on VPP node. -| | ... -| | [Setup] | Configure IPv6 Management Interface -| | When Honeycomb creates first l2 bridge domain -| | ... | ${tunneled_node} | ${bd1_name} | ${bd_settings} -| | Then Bridge domain Operational Data From Honeycomb Should Be -| | ... | ${tunneled_node} | ${bd1_name} | ${bd_settings} - -| TC02: Honeycomb removes bridge domains -| | [Documentation] | Check if Honeycomb can remove bridge domains from a VPP\ -| | ... | node. -| | ... -| | Given Bridge domain Operational Data From Honeycomb Should Be -| | ... | ${tunneled_node} | ${bd1_name} | ${bd_settings} -| | When Honeycomb removes all bridge domains | ${tunneled_node} -| | Then Honeycomb should show no bridge domains | ${tunneled_node} - -| TC03: Honeycomb creates vhost-user interface - server -| | [Documentation] | Check if Honeycomb creates a vhost-user interface, role:\ -| | ... | server. -| | ... -| | Given vhost-user Operational Data From Honeycomb Should Be empty -| | ... | ${tunneled_node} | ${vhost_interface} -| | When Honeycomb creates vhost-user interface -| | ... | ${tunneled_node} | ${vhost_interface} | ${vhost_user_server} -| | Then vhost-user Operational Data From Honeycomb Should Be -| | ... | ${tunneled_node} | ${vhost_interface} | ${vhost_user_server} - -| TC04: Honeycomb modifies vhost-user interface - server -| | [Documentation] | Check if Honeycomb can modify properties of existing\ -| | ... | vhost-user interface, role: server. -| | ... -| | Given vhost-user Operational Data From Honeycomb Should Be -| | ... | ${tunneled_node} | ${vhost_interface} | ${vhost_user_server} -| | When Honeycomb configures vhost-user interface -| | ... | ${tunneled_node} | ${vhost_interface} | ${vhost_user_server_edit_1} -| | Then vhost-user Operational Data From Honeycomb Should Be -| | ... | ${tunneled_node} | ${vhost_interface} | ${vhost_user_server_edit_1} -| | When Honeycomb configures vhost-user interface -| | ... | ${tunneled_node} | ${vhost_interface} | ${vhost_user_server_edit_2} -| | Then vhost-user Operational Data From Honeycomb Should Be -| | ... | ${tunneled_node} | ${vhost_interface} | ${vhost_user_server_edit_2} -| | When Honeycomb configures vhost-user interface -| | ... | ${tunneled_node} | ${vhost_interface} | ${vhost_user_server} -| | Then vhost-user Operational Data From Honeycomb Should Be -| | ... | ${tunneled_node} | ${vhost_interface} | ${vhost_user_server} - -| TC05: Honeycomb deletes vhost-user interface - server -| | [Documentation] | Check if Honeycomb can delete an existing vhost-user\ -| | ... | interface, role: server. -| | ... -| | Given vhost-user Operational Data From Honeycomb Should Be -| | ... | ${tunneled_node} | ${vhost_interface} | ${vhost_user_server} -| | When Honeycomb removes vhost-user interface -| | ... | ${tunneled_node} | ${vhost_interface} -| | Then vhost-user Operational Data From Honeycomb Should Be empty -| | ... | ${tunneled_node} | ${vhost_interface} - -| TC06: Honeycomb can create and delete interfaces -| | [Documentation] | Repeatedly create and delete an interface through Netconf\ -| | ... | and check the reply for any errors. -| | ... -| | Given Netconf session should be established | ${tunneled_node} -| | And Honeycomb creates first L2 bridge domain -| | ... | ${tunneled_node} | bd_netconf | ${bd_settings} -| | :FOR | ${index} | IN RANGE | 20 -| | | When Error trigger is sent | ${trigger_105} -| | | Then Replies should not contain RPC errors - -| TC07: Honeycomb can create vlan subinterface -| | [Documentation] | Configure a Vlan sub-interface under a physical interface. -| | ... -| | Given Netconf session should be established | ${tunneled_node} -| | When Error Trigger Is Sent -| | ... | ${trigger_vlan} | interface=${interface} -| | Then Replies should not contain RPC errors - -*** Keywords *** -| Configure IPv6 Management Interface -| | [Documentation] | Change one of VPP's data-plane interfaces on DUT into\ -| | ... | a control-plane interface that Honeycomb can listen on. Setup IPv6\ -| | ... | addresses on the link. Create an IPv4 to IPv6 tunnel on TG and create\ -| | ... | suite variables. -| | ... -| | Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | Stop VPP service on DUT | ${dut_node} -| | Stop Honeycomb Service on DUTs | ${dut_node} -| | Convert data-plane interface to control-plane -| | ... | ${dut_node} | ${dut_to_tg_if2} -| | Sleep | 5sec | Wait until Linux reclaims the interface. -| | ${tg_to_dut_if2_name}= | Get Interface Name by MAC -| | ... | ${tg_node} | ${tg_to_dut_if2_mac} -| | ${dut_to_tg_if2_name}= | Get Interface Name by MAC -| | ... | ${dut_node} | ${dut_to_tg_if2_mac} -| | ${tunneled_node}= | Copy Dictionary | ${dut_node} -| | Set To Dictionary | ${tunneled_node} | host | ${tg_node['host']} -| | ${interface}= | Get Interface Name | ${dut_node} | ${dut_to_tg_if1} -| | Set Suite Variable | ${interface} -| | Set Suite Variable | ${tunneled_node} -| | Set Suite Variable | ${tg_node} -| | Set Suite Variable | ${dut_node} -| | Set Suite Variable | ${dut_to_tg_if2} -| | Set Suite Variable | ${dut_to_tg_if2_name} -| | Set Suite Variable | ${tg_to_dut_if2_name} -| | Set management interface address -| | ... | ${tg_node} | ${tg_to_dut_if2_name} -| | ... | ${tg_to_dut_if2_ip} | ${ipv6_prefix} -| | Set management interface address -| | ... | ${dut_node} | ${dut_to_tg_if2_name} -| | ... | ${dut_to_tg_if2_ip} | ${ipv6_prefix} -| | Configure Control Interface Tunnel -| | ... | ${tg_node} | ${dut_node['honeycomb']['port']} -| | ... | ${dut_to_tg_if2_ip} | ${dut_node['honeycomb']['port']} -| | Configure Control Interface Tunnel -| | ... | ${tg_node} | ${dut_node['honeycomb']['netconf_port']} -| | ... | ${dut_to_tg_if2_ip} | ${dut_node['honeycomb']['netconf_port']} -| | Restart VPP service | ${dut_node} -| | Configure Honeycomb service on DUTs | ${dut_node} - -| Unconfigure IPv6 Management Interface -| | [Documentation] | Remove all IP addresses from interfaces in the IPv6 link. -| | ... -| | Clear Interface Configuration | ${tg_node} | ${tg_to_dut_if2_name} -| | Clear Interface Configuration | ${dut_node} | ${dut_to_tg_if2_name} diff --git a/tests/honeycomb/func/mgmt-cfg-bgp-apihc-func.robot b/tests/honeycomb/func/mgmt-cfg-bgp-apihc-func.robot deleted file mode 100644 index 26a9de6f5a..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-bgp-apihc-func.robot +++ /dev/null @@ -1,364 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables *** -# Interface to run tests on. -| ${interface}= | ${node['interfaces']['port1']['name']} -| ${dut1_to_tg_ip}= | 192.168.0.1 -| ${tg_to_dut1_ip}= | 192.168.0.2 -| ${dut1_to_dut2_ip}= | 192.168.1.1 -| ${dut2_to_dut1_ip}= | 192.168.1.2 -| ${bgp_port}= | ${179} -| ${bgp_as_number}= | ${37} -| ${prefix}= | ${24} - -*** Settings *** -| Library | resources.libraries.python.honeycomb.IPv6Management -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/bgp.robot -| Resource | resources/libraries/robot/honeycomb/routing.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/honeycomb/ipv6_control.robot -| Variables | resources/test_data/honeycomb/bgp.py -| ... -| Suite Setup | Run Keywords -| ... | Enable Honeycomb Feature | ${node} | BGP | AND -| ... | Configure BGP Module | ${node} | ${dut1_to_tg_ip} -| ... | ${bgp_port} | ${bgp_as_number} | AND -| ... | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Run Keywords -| ... | Tear Down Honeycomb Functional Test Suite | ${nodes['DUT1']} | AND -| ... | Stop Honeycomb service on DUTs | ${nodes['DUT2']} | AND -| ... | Unconfigure IPv4 Management Interfaces | AND -| ... | Disable Honeycomb Feature | ${node} | BGP | AND -| ... | Disable Honeycomb Feature | ${nodes['DUT2']} | BGP -| ... -# HONEYCOMB-409: BGP configuration via ODL is currently not fully supported -| Force Tags | HC_FUNC | HC_REST_ONLY -| ... -| Documentation | *Honeycomb BGP management test suite.* - -*** Test Cases *** -| TC01: Honeycomb configures BGP peer - Internal -| | [Documentation] | Check if Honeycomb can configure an internal BGP peer. -| | ... -| | When Honeycomb adds BGP peer -| | ... | ${node} | ${address_internal} | ${peer_internal} -| | Then BGP peer from Honeycomb should be -| | ... | ${node} | ${address_internal} | ${peer_internal} - -| TC02: Honeycomb removes peer configuration -| | [Documentation] | Check if Honeycomb can remove a configured BGP peer. -| | ... -| | Given BGP peer from Honeycomb should be -| | ... | ${node} | ${address_internal} | ${peer_internal} -| | When Honeycomb removes BGP peer | ${node} | ${address_internal} -| | Then No BGP peers should be configured | ${node} - -| TC03: Honeycomb updates existing BGP peer - Internal -| | [Documentation] | Check if Honeycomb can update an existing BGP peer. -| | ... -| | [Teardown] | Honeycomb removes BGP peer | ${node} | ${address_internal} -| | ... -| | Given No BGP peers should be configured | ${node} -| | When Honeycomb adds BGP peer -| | ... | ${node} | ${address_internal} | ${peer_internal} -| | And Honeycomb adds BGP peer -| | ... | ${node} | ${address_internal} | ${peer_internal_update} -| | Then BGP peer from Honeycomb should be -| | ... | ${node} | ${address_internal} | ${peer_internal_update} - -| TC04: Honeycomb configures BGP peer - Application -| | [Documentation] | Check if Honeycomb can configure an application BGP peer. -| | ... -| | [Teardown] | Honeycomb removes BGP peer | ${node} | ${address_application} -| | ... -| | Given No BGP peers should be configured | ${node} -| | When Honeycomb adds BGP peer -| | ... | ${node} | ${address_application} | ${peer_application} -| | Then BGP peer from Honeycomb should be -| | ... | ${node} | ${address_application} | ${peer_application} - -| TC05: Honeycomb configures a second BGP peer -| | [Documentation] | Check if Honeycomb can configure more than one BGP peer. -| | ... -| | [Teardown] | Run Keywords -| | ... | Honeycomb removes BGP peer | ${node} | ${address_internal} | AND -| | ... | Honeycomb removes BGP peer | ${node} | ${address_internal2} -| | ... -| | Given No BGP peers should be configured | ${node} -| | When Honeycomb adds BGP peer -| | ... | ${node} | ${address_internal} | ${peer_internal} -| | And Honeycomb adds BGP peer -| | ... | ${node} | ${address_internal2} | ${peer_internal2} -| | Then BGP peer from Honeycomb should be -| | ... | ${node} | ${address_internal} | ${peer_internal} -| | And BGP peer from Honeycomb should be -| | ... | ${node} | ${address_internal2} | ${peer_internal2} - -| TC06: Honeycomb configures IPv4 route using BGP -| | [Documentation] | Check if Honeycomb can configure a BGP route under a peer. -| | ... -| | Given Honeycomb adds BGP peer -| | ... | ${node} | ${address_internal} | ${peer_internal} -| | When Honeycomb configures BGP route -| | ... | ${node} | ${address_internal} | ${route_data_ipv4} -| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4 -| | Then BGP Route from Honeycomb should be -| | ... | ${node} | ${address_internal} | ${route_data_ipv4_oper} -| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4 - -| TC07: Honeycomb removes IPv4 route configuration -| | [Documentation] | Check if Honeycomb can remove a configured BGP route. -| | ... -| | Given BGP peer from Honeycomb should be -| | ... | ${node} | ${address_internal} | ${peer_internal} -| | And BGP Route from Honeycomb should be -| | ... | ${node} | ${address_internal} | ${route_data_ipv4_oper} -| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4 -| | When Honeycomb removes BGP route | ${node} | ${address_internal} -| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4 -| | Then No BGP Routes Should exist -| | ... | ${node} | ${address_internal} | ipv4 - -| TC08: Honeycomb updates existing IPv4 route using BGP -| | [Documentation] | Check if Honeycomb can update an existing BGP route. -| | ... -| | [Teardown] | Honeycomb removes BGP route | ${node} | ${address_internal} -| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4 -| | ... -| | Given BGP peer from Honeycomb should be -| | ... | ${node} | ${address_internal} | ${peer_internal} -| | And No BGP Routes Should exist -| | ... | ${node} | ${address_internal} | ipv4 -| | When Honeycomb configures BGP route -| | ... | ${node} | ${address_internal} | ${route_data_ipv4} -| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4 -| | And Honeycomb configures BGP route -| | ... | ${node} | ${address_internal} | ${route_data_ipv4_update} -| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4 -| | Then BGP Route from Honeycomb should be -| | ... | ${node} | ${address_internal} | ${route_data_ipv4_update_oper} -| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4 - -| TC09: Honeycomb configures a second IPv4 route -| | [Documentation] | Check if Honeycomb can configure more than one BGP route. -| | ... -| | [Teardown] | Run Keywords -| | ... | Honeycomb removes BGP route | ${node} | ${address_internal} -| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4 | AND -| | ... | Honeycomb removes BGP route | ${node} | ${address_internal} -| | ... | ${route_address_ipv4_2} | ${route_id_ipv4_2} | ipv4 | AND -| | ... | Honeycomb removes BGP peer | ${node} | ${address_internal} -| | ... -| | Given BGP peer from Honeycomb should be -| | ... | ${node} | ${address_internal} | ${peer_internal} -| | When Honeycomb configures BGP route -| | ... | ${node} | ${address_internal} | ${route_data_ipv4} -| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4 -| | And Honeycomb configures BGP route -| | ... | ${node} | ${address_internal} | ${route_data_ipv4_2} -| | ... | ${route_address_ipv4_2} | ${route_id_ipv4_2} | ipv4 -| | Then BGP Route from Honeycomb should be -| | ... | ${node} | ${address_internal} | ${route_data_ipv4_oper} -| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4 -| | And BGP Route from Honeycomb should be -| | ... | ${node} | ${address_internal} | ${route_data_ipv4_2_oper} -| | ... | ${route_address_ipv4_2} | ${route_id_ipv4_2} | ipv4 - -| TC10: Honeycomb sends BGP OPEN messages to configured peer -| | [Documentation] -| | ... | [top] TG-DUT1-TG. -| | ... | [enc] Eth-IPv4-TCP-BGP. -| | ... | [cfg] On DUT1 give Honeycomb control over the data-plane interface -| | ... | connected to TG. Configure a BGP peer with the address of TG. -| | ... | [ver] Open a TCP listener on TG on the BGP port and listen for BGP -| | ... | OPEN message. On receive, verify message fields. -| | ... -| | [Setup] | Run Keywords -| | ... | Configure BGP Module | ${node} | ${dut1_to_dut2_ip} -| | ... | ${bgp_port} | ${bgp_as_number} | AND -| | ... | Configure IPv4 Management Interface -| | [Teardown] | Honeycomb removes BGP peer | ${dut1_node} | ${address_internal} -| | When Honeycomb adds BGP peer -| | ... | ${dut1_node} | ${address_internal} | ${peer_internal} -| | Then Receive BGP OPEN message -| | ... | ${tg_node} | ${tg_to_dut1_ip} | ${dut1_to_dut2_ip} -| | ... | ${bgp_port} | ${bgp_as_number} | ${holdtime_internal} - -| TC11: Honeycomb shows connected peer in operational data -| | [Documentation] -| | ... | [top] TG-DUT1-DUT2-TG. -| | ... | [enc] Eth-IPv4-TCP-BGP. -| | ... | [cfg] On DUT1 and DUT2 give Honeycomb control over the data-plane -| | ... | interfaces connecting DUT1 ad DUT2. Configure BGP peers on DUT1 -| | ... | and DUT2 with each other's IP address. -| | ... | [ver] Using Restconf, verify that Honeycomb on each DUT has the -| | ... | other DUT's entry in operational data. -| | ... -| | When Honeycomb adds BGP peer -| | ... | ${dut1_node} | ${dut2_to_dut1_ip} | ${dut2_peer} -| | And Honeycomb adds BGP peer -| | ... | ${dut2_node} | ${dut1_to_dut2_ip} | ${dut1_peer} -| | Sleep | 5s | Wait for BGP connection. Retry timer is 5 seconds. -| | Then Peer operational data from Honeycomb should be -| | ... | ${dut1_node} | ${dut2_to_dut1_ip} -| | And Peer operational data from Honeycomb should be -| | ... | ${dut2_node} | ${dut1_to_dut2_ip} - -| TC12: Honeycomb sends IPv4 BGP route to connected peer -| | [Documentation] -| | ... | [top] TG-DUT1-DUT2-TG. -| | ... | [enc] Eth-IPv4-TCP-BGP. -| | ... | [cfg] On DUT1 and DUT2 give Honeycomb control over the data-plane -| | ... | interfaces connecting DUT1 ad DUT2. Configure BGP peers on DUT1 -| | ... | and DUT2 with each other's IP address. On DUT2 configure a static -| | ... | IPv4 route using Honeycomb's BGP module. -| | ... | [ver] Verify that the route is present in BGP -| | ... | local RIB and VPP's routing table on each DUT. -| | ... -| | Given Peer operational data from Honeycomb should be -| | ... | ${dut1_node} | ${dut2_to_dut1_ip} -| | And Peer operational data from Honeycomb should be -| | ... | ${dut2_node} | ${dut1_to_dut2_ip} -| | When Honeycomb adds BGP peer -| | ... | ${dut2_node} | ${address_application} | ${peer_application} -| | And Honeycomb configures BGP route -| | ... | ${dut2_node} | ${address_application} | ${dut1_route} -| | ... | ${dut1_route_address} | ${dut1_route_id} | ipv4 -| | And Sleep | 5s | Wait for route advertisement. Retry timer is 5 seconds. -| | Then Routing data from Honeycomb should contain -| | ... | ${dut1_node} | learned-protocol-0 | ipv4 | ${route_operational} -| | And Routing data from Honeycomb should contain -| | ... | ${dut2_node} | learned-protocol-0 | ipv4 | ${route_operational} -| | And BGP Loc-RIB table should include | ${dut1_node} | ${rib_operational} -| | And BGP Loc-RIB table should include | ${dut2_node} | ${rib_operational} - -| TC13: Honeycomb sends IPv6 BGP route to connected peer -| | [Documentation] -| | ... | [top] TG-DUT1-DUT2-TG. -| | ... | [enc] Eth-IPv4-TCP-BGP. -| | ... | [cfg] On DUT1 and DUT2 give Honeycomb control over the data-plane -| | ... | interfaces connecting DUT1 ad DUT2. Configure BGP peers on DUT1 -| | ... | and DUT2 with each other's IP address. On DUT2 configure a static -| | ... | IPv6 route using Honeycomb's BGP module. -| | ... | [ver] Verify that the route is present in BGP -| | ... | local RIB and VPP's routing table on each DUT. -| | ... -| | Given Peer operational data from Honeycomb should be -| | ... | ${dut1_node} | ${dut2_to_dut1_ip} -| | And Peer operational data from Honeycomb should be -| | ... | ${dut2_node} | ${dut1_to_dut2_ip} -| | And Honeycomb adds BGP peer -| | ... | ${dut2_node} | ${address_application} | ${peer_application} -| | And Honeycomb configures BGP route -| | ... | ${dut2_node} | ${address_application} | ${dut1_route_ip6} -| | ... | ${dut1_route_ip6_prefix} | ${dut1_route_ip6_id} | ipv6 -| | And Sleep | 5s | Wait for route advertisement. Retry timer is 5 seconds. -| | Then Routing data from Honeycomb should contain -| | ... | ${dut1_node} | learned-protocol-0 | ipv6 | ${route_ip6_operational} -| | And Routing data from Honeycomb should contain -| | ... | ${dut2_node} | learned-protocol-0 | ipv6 | ${route_ip6_operational} -| | And BGP Loc-RIB table should include | ${dut1_node} | ${rib_ip6_operational} -| | And BGP Loc-RIB table should include | ${dut2_node} | ${rib_ip6_operational} - -#TODO: Add tests once implemented in HC: -# IPv6 neighbor, L2VPN, L3VPN, linkstate, route reflector, and more - -*** Keywords *** -| Configure IPv4 Management Interface -| | [Documentation] | Change one of VPP's data-plane interfaces on DUT into\ -| | ... | a control-plane interface that Honeycomb can listen on. Setup IP\ -| | ... | addresses on the link, create suite variables for traffic trests, set -| | ... | static ARP entries, then restart VPP and Honeycomb to apply changes. -| | ... -| | Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | ${interface}= | Get Interface Name | ${dut1_node} | ${dut1_to_tg} -| | Set Suite Variable | ${interface} -| | Set Suite Variable | ${tg_node} -| | Set Suite Variable | ${dut1_node} -| | Set Suite Variable | ${dut2_node} -| | Set Suite Variable | ${dut1_to_tg} -| | Stop VPP service on DUT | ${dut1_node} -| | Stop VPP service on DUT | ${dut2_node} -| | Stop Honeycomb Service on DUTs | ${dut1_node} -| | Stop Honeycomb Service on DUTs | ${dut2_node} -| | Convert data-plane interface to control-plane -| | ... | ${dut1_node} | ${dut1_to_tg} -| | Convert data-plane interface to control-plane -| | ... | ${dut1_node} | ${dut1_to_dut2} -| | Convert data-plane interface to control-plane -| | ... | ${dut2_node} | ${dut2_to_dut1} -| | Sleep | 5sec | Wait until OS reclaims the interfaces. -| | ${tg_to_dut1_name}= | Get Interface Name by MAC -| | ... | ${tg_node} | ${tg_to_dut1_mac} -| | ${dut1_to_tg_name}= | Get Interface Name by MAC -| | ... | ${dut1_node} | ${dut1_to_tg_mac} -| | ${dut1_to_dut2_name}= | Get Interface Name by MAC -| | ... | ${dut1_node} | ${dut1_to_dut2_mac} -| | ${dut2_to_dut1_name}= | Get Interface Name by MAC -| | ... | ${dut2_node} | ${dut2_to_dut1_mac} -| | Set Suite Variable | ${dut1_to_tg_name} -| | Set Suite Variable | ${tg_to_dut1_name} -| | Set Suite Variable | ${dut1_to_dut2_name} -| | Set Suite Variable | ${dut2_to_dut1_name} -| | Set management interface address -| | ... | ${tg_node} | ${tg_to_dut1_name} -| | ... | ${tg_to_dut1_ip} | ${prefix} -| | Set management interface address -| | ... | ${dut1_node} | ${dut1_to_tg_name} -| | ... | ${dut1_to_tg_ip} | ${prefix} -| | Set management interface address -| | ... | ${dut1_node} | ${dut1_to_dut2_name} -| | ... | ${dut1_to_dut2_ip} | ${prefix} -| | Set management interface address -| | ... | ${dut2_node} | ${dut2_to_dut1_name} -| | ... | ${dut2_to_dut1_ip} | ${prefix} -| | Set Static ARP | ${tg_node} | ${dut1_to_tg_ip} | ${dut1_to_tg_mac} -| | Set Static ARP | ${dut1_node} | ${tg_to_dut1_ip} | ${tg_to_dut1_mac} -| | Set Static ARP | ${dut1_node} | ${dut2_to_dut1_ip} | ${dut2_to_dut1_mac} -| | Set Static ARP | ${dut2_node} | ${dut1_to_dut2_ip} | ${dut1_to_dut2_mac} -| | Enable Honeycomb Feature | ${dut2_node} | BGP -| | Configure BGP Module | ${dut1_node} | ${dut1_to_dut2_ip} -| | ... | ${bgp_port} | ${bgp_as_number} -| | Configure BGP Module | ${dut2_node} | ${dut2_to_dut1_ip} -| | ... | ${bgp_port} | ${bgp_as_number} -| | Restart VPP service | ${dut1_node} -| | Restart VPP service | ${dut2_node} -| | Configure Honeycomb service on DUTs | ${dut1_node} -| | Set Up Honeycomb Functional Test Suite | ${dut2_node} - -| Unconfigure IPv4 Management Interfaces -| | [Documentation] | Remove all IP addresses from the interface. -| | ... -| | Clear Interface Configuration | ${tg_node} | ${tg_to_dut1_name} -| | Clear Interface Configuration | ${dut1_node} | ${dut1_to_tg_name} -| | Clear Interface Configuration | ${dut1_node} | ${dut1_to_dut2_name} -| | Clear Interface Configuration | ${dut2_node} | ${dut2_to_dut1_name} - -| Set BGP Suite Variables -| | Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | Set Suite Variable | ${interface} -| | Set Suite Variable | ${tg_node} -| | Set Suite Variable | ${dut1_node} -| | Set Suite Variable | ${dut2_node} -| | Set Suite Variable | ${dut1_to_tg} -| | Set Suite Variable | ${dut1_to_tg_name} -| | Set Suite Variable | ${tg_to_dut1_name} -| | Set Suite Variable | ${dut1_to_dut2_name} -| | Set Suite Variable | ${dut2_to_dut1_name} diff --git a/tests/honeycomb/func/mgmt-cfg-dhcp-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-dhcp-apihc-apivat-func.robot deleted file mode 100644 index 50055f7d96..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-dhcp-apihc-apivat-func.robot +++ /dev/null @@ -1,127 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/features/dhcp_proxy.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/dhcp.robot -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.IPv6Util -| Variables | resources/test_data/honeycomb/dhcp_relay.py -| ... -| ... -| Documentation | *Honeycomb DHCP relay test suite.* -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Force Tags | HC_FUNC - -*** Test Cases *** -| TC01: Honeycomb can configure DHCP relay entry -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-DHCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 configure IP addresses\ -| | ... | neighbors and configure DHCP relay. -| | ... | [Ver] Send DHCP packets from TG interface to DUT. Receive all packets\ -| | ... | on the second TG interface and verify required fields. -| | ... -| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| | ... | AND | Log DHCP relay configuration from VAT | ${node} | ipv4 -| | ... -| | Given DHCP relay Operational Data From Honeycomb Should Be empty | ${node} -| | When Honeycomb configures DHCP relay | ${node} | ${relay1} | ipv4 | ${0} -| | Then DHCP relay configuration from Honeycomb should contain -| | ... | ${node} | ${relay1_oper} -| | When DHCP relay test setup -| | Then Send DHCP messages and check answer | ${tg_node} | ${tg_to_dut_if1} -| | ... | ${tg_to_dut_if2} | ${dhcp_server1_ip} | ${tg_to_dut_if2_mac} -| | ... | ${client_ip} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_ip} - -| TC02: Honeycomb can remove DHCP relay entry -| | [Documentation] | Remove DHCP relay configuration, and verify that\ -| | ... | it was removed. -| | ... -| | Given DHCP relay configuration from Honeycomb should contain -| | ... | ${node} | ${relay1_oper} -| | When Honeycomb clears DHCP relay configuration | ${node} -| | Then DHCP relay Operational Data From Honeycomb Should Be empty | ${node} - -| TC03: Honeycomb can configure multiple DHCP relay servers. -| | [Documentation] | Configure multiple DHCP relay servers and verify\ -| | ... | their configuration using operational data. -| | ... -| | [Teardown] | Honeycomb clears DHCP relay configuration | ${node} -| | ... -| | Given DHCP relay Operational Data From Honeycomb Should Be empty | ${node} -| | And Honeycomb configures DHCP relay | ${node} | ${relay2} | ipv4 | ${0} -| | Then DHCP relay configuration from Honeycomb should contain -| | ... | ${node} | ${relay2_oper} - -| TC04: Honeycomb can configure DHCP relay entry with ipv6 -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv6-DHCPv6. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 configure IP addresses\ -| | ... | neighbors and configure DHCP relay. -| | ... | [Ver] Send DHCPv6 packets from TG interface to DUT. Receive all\ -| | ... | packets on the second TG interface and verify required fields. -| | ... -| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| | ... | AND | Log DHCP relay configuration from VAT | ${node} | ipv6 -| | ... | AND | Honeycomb clears DHCP relay configuration | ${node} -| | ... -| | Given DHCP relay Operational Data From Honeycomb Should Be empty | ${node} -| | When Honeycomb configures DHCP relay | ${node} | ${relay_v6} | ipv6 | ${0} -| | Then DHCP relay configuration from Honeycomb should contain -| | ... | ${node} | ${relay_v6_oper} -| | When DHCP relay test setup IPv6 -| | Then Send DHCPv6 Messages | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} -| | ... | ${dut_to_tg_if1_ip6} | ${dut_to_tg_if1_mac} | ${dhcp_server_ip6} -| | ... | ${tg_to_dut_if2_mac} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if2_mac} - -*** Keywords *** -| DHCP relay test setup -| | Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up -| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up -| | Honeycomb sets interface IPv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} -| | Honeycomb sets interface IPv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} -| | VPP Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2} | ${dhcp_server1_ip} -| | ... | ${tg_to_dut_if2_mac} -| | VPP Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2} | ${dhcp_server2_ip} -| | ... | ${tg_to_dut_if2_mac} -| | And VPP Route Add | ${dut_node} | 255.255.255.255 | 32 | local=${True} - -| DHCP relay test setup IPv6 -| | Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up -| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up -| | And Vpp All Ra Suppress Link Layer | ${nodes} -| | Honeycomb sets interface IPv6 address | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip6} | ${prefix_length_v6} -| | Honeycomb sets interface IPv6 address | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip6} | ${prefix_length_v6} -| | And VPP Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${dhcp_server_ip6} | ${tg_to_dut_if2_mac} -| | And VPP Route Add | ${dut_node} | ff02::1:2 | 128 | local=${True} diff --git a/tests/honeycomb/func/mgmt-cfg-int-apihcnc-func.robot b/tests/honeycomb/func/mgmt-cfg-int-apihcnc-func.robot deleted file mode 100644 index 2ba904449a..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-int-apihcnc-func.robot +++ /dev/null @@ -1,76 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/netconf.robot -| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot -| Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords -| ... | WITH NAME | InterfaceAPI -| Variables | resources/test_data/honeycomb/netconf/triggers.py -| ... -| Documentation | *Netconf test suite. Contains test cases that need to bypass\ -| ... | REST API.* -| ... -| Force Tags | HC_FUNC | HC_REST_ONLY -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... - -*** Variables *** -| ${interface}= | ${node['interfaces']['port1']['name']} -| &{bd_settings}= | flood=${True} | forward=${True} | learn=${True} -| ... | unknown-unicast-flood=${True} | arp-termination=${True} - -*** Test Cases *** -| TC01: Honeycomb can create and delete interfaces -| | [Documentation] | Repeatedly create and delete an interface through Netconf\ -| | ... | and check the reply for any errors. -| | ... -| | Given Netconf session should be established | ${node} -| | And Honeycomb creates first L2 bridge domain -| | ... | ${node} | bd_netconf | ${bd_settings} -| | :FOR | ${index} | IN RANGE | 20 -| | | When Error trigger is sent | ${trigger_105} -| | | Then Replies should not contain RPC errors - -| TC02: Transaction revert test case 1 -| | [Documentation] | Configure two conflicting VxLAN tunnels, then verify\ -| | ... | that neither tunnel exists. -| | ... -| | Given Netconf session should be established | ${node} -| | ${if_data}= | And InterfaceAPI.Get all interfaces oper data | ${node} -| | When Error trigger is sent | ${trigger_revert1} -| | ${if_data_new}= | And InterfaceAPI.Get all interfaces oper data | ${node} -| | Then Should be equal | ${if_data} | ${if_data_new} - -| TC03: Transaction revert test case 2 -| | [Documentation] | Configure two conflicting TAP interfaces, then verify\ -| | ... | that neither interface exists. -| | ... -| | Given Netconf session should be established | ${node} -| | ${if_data}= | And InterfaceAPI.Get all interfaces oper data | ${node} -| | When Error trigger is sent | ${trigger_revert1} -| | ${if_data_new}= | And InterfaceAPI.Get all interfaces oper data | ${node} -| | Then Should be equal | ${if_data} | ${if_data_new} - -| TC04: Vlan subinterface creation -| | [Documentation] | Configure a Vlan sub-interface under a physical interface. -| | ... -| | Given Netconf session should be established | ${node} -| | When Error Trigger Is Sent -| | ... | ${trigger_vlan} | interface=${interface} -| | Then Replies should not contain RPC errors diff --git a/tests/honeycomb/func/mgmt-cfg-int-subint-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-int-subint-apihc-apivat-func.robot deleted file mode 100644 index 12483ad864..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-int-subint-apihc-apivat-func.robot +++ /dev/null @@ -1,618 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/sub_interface.robot -| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Library | resources.libraries.python.InterfaceUtil -| Variables | resources/test_data/honeycomb/sub_interfaces.py -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Force Tags | HC_FUNC -| ... -| Documentation | *Honeycomb sub-interface management test suite.* - -*** Variables *** -# Test interfaces and their sub-interface parameters: -| ${super_if}= | ${node['interfaces']['port1']['name']} -| ${super_if2}= | ${node['interfaces']['port3']['name']} -| ${sub_if_id}= | ${sub_if_1_settings['identifier']} -| ${sub_if_name}= | ${super_if}.${sub_if_id} -| ${sub_if2_name}= | ${super_if2}.${sub_if_id} - -*** Test Cases *** -| TC01: Honeycomb creates sub-interface -| | [Documentation] | Check if Honeycomb creates a sub-interface. -| | ... -| | Given Honeycomb configures interface state | ${node} | ${super_if} | down -| | And sub-interface Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | And interface Operational Data From VAT Should Be empty -| | ... | ${node} | ${sub_if_name} -| | When Honeycomb creates sub-interface | ${node} | ${super_if} -| | ... | ${sub_if_1_match} | ${sub_if_1_tags} | ${sub_if_1_settings} -| | Then Sub-interface Operational Data From Honeycomb Should Be -| | ... | ${node} | ${super_if} | ${sub_if_id} | ${sub_if_1_oper} -| | And Sub-interface Operational Data From VAT Should Be -| | ... | ${node} | ${sub_if_name} | ${sub_if_1_oper} -| | And sub-interface indices from Honeycomb and VAT should correspond -| | ... | ${node} | ${super_if} | ${sub_if_id} - -| TC02: Honeycomb sets interface and sub-interface up -| | [Documentation] | Honeycomb changes the state of interface\ -| | ... | and of its sub-interface to up. -| | ... -| | Given interface state from Honeycomb should be -| | ... | ${node} | ${super_if} | down -| | And interface state from VAT should be -| | ... | ${node} | ${super_if} | down -| | Sub-interface state from Honeycomb should be -| | ... | ${node} | ${super_if} | ${sub_if_id} | down | down -| | Sub-interface state from VAT should be -| | ... | ${node} | ${sub_if_name} | down | down -| | When Honeycomb configures interface state -| | ... | ${node} | ${super_if} | up -| | Then interface state from Honeycomb should be -| | ... | ${node} | ${super_if} | up -| | And interface state from VAT should be -| | ... | ${node} | ${super_if} | up -| | When Honeycomb sets the sub-interface up -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | Vpp Node Interfaces Ready Wait | ${node} -| | Then Sub-interface state from Honeycomb should be -| | ... | ${node} | ${super_if} | ${sub_if_id} | up | up -| | And sub-interface state from VAT should be -| | ... | ${node} | ${sub_if_name} | up | up - -| TC03: Honeycomb sets sub-interface down while its super-interface is up -| | [Documentation] | Honeycomb sets the sub-interface down while its \ -| | ... | super-interface is up. It must be possible. -| | ... -| | [Teardown] | Set super and sub interfaces up -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... -| | Given sub-interface state from Honeycomb should be -| | ... | ${node} | ${super_if} | ${sub_if_id} | up | up -| | And sub-interface state from VAT should be -| | ... | ${node} | ${sub_if_name} | up | up -| | And interface state from Honeycomb should be -| | ... | ${node} | ${super_if} | up -| | And interface state from VAT should be -| | ... | ${node} | ${super_if} | up -| | When Honeycomb sets the sub-interface down -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | Then interface state from Honeycomb should be -| | ... | ${node} | ${super_if} | up -| | And interface state from VAT should be -| | ... | ${node} | ${super_if} | up -| | And sub-interface state from Honeycomb should be -| | ... | ${node} | ${super_if} | ${sub_if_id} | down | up -| | And sub-interface state from VAT should be -| | ... | ${node} | ${sub_if_name} | down | up - -| TC04: Honeycomb sets interface and sub-interface down -| | [Documentation] | Honeycomb changes the state of interface down and then \ -| | ... | changes the state of its sub-interface down, in this order. -| | ... -| | [Teardown] | Set super and sub interfaces down -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... -| | Given interface state from Honeycomb should be -| | ... | ${node} | ${super_if} | up -| | And interface state from VAT should be -| | ... | ${node} | ${super_if} | up -| | When Honeycomb configures interface state -| | ... | ${node} | ${super_if} | down -| | Then interface state from Honeycomb should be -| | ... | ${node} | ${super_if} | down -| | And interface state from VAT should be -| | ... | ${node} | ${super_if} | down -| | Given sub-interface state from Honeycomb should be -| | ... | ${node} | ${super_if} | ${sub_if_id} | up | down -| | And sub-interface state from VAT should be -| | ... | ${node} | ${sub_if_name} | up | down -| | When Honeycomb sets the sub-interface down -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | Then sub-interface state from Honeycomb should be -| | ... | ${node} | ${super_if} | ${sub_if_id} | down | down -| | And sub-interface state from VAT should be -| | ... | ${node} | ${sub_if_name} | down | down - -| TC05: Honeycomb fails to set sub-interface up while its super-interface is down -| | [Documentation] | Honeycomb tries to set the sub-interface up while its \ -| | ... | super-interface is down. It must not be possible. -| | ... -| | Given interface state from Honeycomb should be -| | ... | ${node} | ${super_if} | down -| | And interface state from VAT should be -| | ... | ${node} | ${super_if} | down -| | And sub-interface state from Honeycomb should be -| | ... | ${node} | ${super_if} | ${sub_if_id} | down | down -| | And sub-interface state from VAT should be -| | ... | ${node} | ${sub_if_name} | down | down -| | When Honeycomb fails to set sub-interface up -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | Then interface state from Honeycomb should be -| | ... | ${node} | ${super_if} | down -| | And interface state from VAT should be -| | ... | ${node} | ${super_if} | down -| | And sub-interface state from Honeycomb should be -| | ... | ${node} | ${super_if} | ${sub_if_id} | down | down -| | And sub-interface state from VAT should be -| | ... | ${node} | ${sub_if_name} | down | down - -| TC06: Honeycomb fails to delete sub-interface -| | [Documentation] | Check if Honeycomb can delete an existing sub-interface. -| | ... -| | [Setup] | Set super and sub interfaces down -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... -| | Given sub-interface Operational Data From Honeycomb Should Be -| | ... | ${node} | ${super_if} | ${sub_if_id} | ${sub_if_1_oper} -| | And sub-interface Operational Data From VAT Should Be -| | ... | ${node} | ${sub_if_name} | ${sub_if_1_oper} -| | When Honeycomb fails to remove all sub-interfaces -| | ... | ${node} | ${super_if} -| | Then sub-interface Operational Data From Honeycomb Should Be -| | ... | ${node} | ${super_if} | ${sub_if_id} | ${sub_if_1_oper} -| | And sub-interface Operational Data From VAT Should Be -| | ... | ${node} | ${sub_if_name} | ${sub_if_1_oper} - -| TC07: Honeycomb adds sub-interface to new bridge domain -| | [Documentation] | Check if Honeycomb adds a sub-interface to bridge domain. -| | ... -| | [Setup] | Set super and sub interfaces down -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... -| | Given sub-interface Operational Data From Honeycomb Should Be -| | ... | ${node} | ${super_if} | ${sub_if_id} | ${sub_if_1_oper} -| | And sub-interface Operational Data From VAT Should Be -| | ... | ${node} | ${sub_if_name} | ${sub_if_1_oper} -| | When Honeycomb creates first L2 bridge domain -| | ... | ${node} | ${bd_name} | ${bd_settings} -| | Then bridge domain Operational Data From Honeycomb Should Be -| | ... | ${node} | ${bd_name} | ${bd_settings} -| | When Honeycomb adds sub-interface to bridge domain -| | ... | ${node} | ${super_if} | ${sub_if_id} | ${sub_bd_settings} -| | Then sub-interface bridge domain Operational Data From Honeycomb Should Be -| | ... | ${node} | ${super_if} | ${sub_if_id} | ${sub_bd_settings} -| | And Sub-interface bridge domain Operational Data From PAPI Should Be -| | ... | ${node} | ${sub_if_name} | ${sub_bd_settings} -| | And sub-interface Operational Data From VAT Should Be -| | ... | ${node} | ${sub_if_name} | ${sub_if_1_oper} - -| TC08: Honeycomb enables tag-rewrite pop 1 -| | [Documentation] | Check if Honeycomb enables tag-rewrite and sets its \ -| | ... | parameters correctly. Case: pop 1. -| | ... -| | [Teardown] | Honeycomb disables tag rewrite -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... -| | Given rewrite tag from Honeycomb should be empty -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | When Honeycomb configures tag rewrite -| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_pop_1} -| | Then rewrite tag from Honeycomb should be -| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_pop_1_oper} -| | And rewrite tag from VAT should be -| | ... | ${node} | ${sub_if_name} | ${tag_rewrite_pop_1_VAT} - -| TC09: Honeycomb enables tag-rewrite push -| | [Documentation] | Check if Honeycomb enables tag-rewrite and sets its \ -| | ... | parameters correctly. Case: push. -| | ... -| | [Teardown] | Honeycomb disables tag rewrite -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... -| | Given rewrite tag from Honeycomb should be empty -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | When Honeycomb configures tag rewrite -| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_push} -| | Then rewrite tag from Honeycomb should be -| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_push_oper} -| | And rewrite tag from VAT should be -| | ... | ${node} | ${sub_if_name} | ${tag_rewrite_push_VAT} - -| TC10: Honeycomb enables tag-rewrite translate 1-2 -| | [Documentation] | Check if Honeycomb enables tag-rewrite and sets its \ -| | ... | parameters correctly. Case: translate 1-2. -| | ... -| | [Teardown] | Honeycomb disables tag rewrite -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... -| | Given rewrite tag from Honeycomb should be empty -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | When Honeycomb configures tag rewrite -| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_translate_1_2} -| | Then rewrite tag from Honeycomb should be -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... | ${tag_rewrite_translate_1_2_oper} -| | And rewrite tag from VAT should be -| | ... | ${node} | ${sub_if_name} | ${tag_rewrite_translate_1_2_VAT} - -| TC11: Honeycomb disables tag-rewrite -| | [Documentation] | Check if Honeycomb disables the tag-rewrite. -| | ... -| | [Teardown] | Honeycomb disables tag rewrite -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... -| | When Honeycomb configures tag rewrite -| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_pop_1} -| | Then rewrite tag from Honeycomb should be -| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_pop_1_oper} -| | When Honeycomb configures tag rewrite -| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_disabled} -| | Then rewrite tag from Honeycomb should be empty -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | And rewrite tag from VAT should be -| | ... | ${node} | ${sub_if_name} | ${tag_rewrite_disabled_VAT} - -| TC12: Honeycomb enables tag-rewrite pop 1 again -| | [Documentation] | Check if Honeycomb can enable tag-rewrite again, once it \ -| | ... | was disabled by Honeycomb. -| | ... -| | [Teardown] | Honeycomb disables tag rewrite -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... -| | Given rewrite tag from Honeycomb should be empty -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | When Honeycomb configures tag rewrite -| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_pop_1} -| | Then rewrite tag from Honeycomb should be -| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_pop_1_oper} -| | And rewrite tag from VAT should be -| | ... | ${node} | ${sub_if_name} | ${tag_rewrite_pop_1_VAT} - -| TC13: Honeycomb modifies the tag-rewrite -| | [Documentation] | Honeycomb sets the tag-rewrite: -| | ... | 1. pop 1, then -| | ... | 2. push, then -| | ... | 3. translate 1 - 2 -| | ... | Then Honeycomb disables the tag-rewrite. -| | ... -| | [Teardown] | Honeycomb disables tag rewrite -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... -| | Given rewrite tag from Honeycomb should be empty -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | When Honeycomb configures tag rewrite -| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_pop_1} -| | Then rewrite tag from Honeycomb should be -| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_pop_1_oper} -| | And rewrite tag from VAT should be -| | ... | ${node} | ${sub_if_name} | ${tag_rewrite_pop_1_VAT} -| | When Honeycomb configures tag rewrite -| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_push} -| | Then rewrite tag from Honeycomb should be -| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_push_oper} -| | And rewrite tag from VAT should be -| | ... | ${node} | ${sub_if_name} | ${tag_rewrite_push_VAT} -| | When Honeycomb configures tag rewrite -| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_translate_1_2} -| | Then rewrite tag from Honeycomb should be -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... | ${tag_rewrite_translate_1_2_oper} -| | And rewrite tag from VAT should be -| | ... | ${node} | ${sub_if_name} | ${tag_rewrite_translate_1_2_VAT} -| | When Honeycomb configures tag rewrite -| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_disabled} -| | Then rewrite tag from Honeycomb should be empty -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | And rewrite tag from VAT should be -| | ... | ${node} | ${sub_if_name} | ${tag_rewrite_disabled_VAT} - -| TC14: Honeycomb fails to set wrong vlan-type in tag-rewrite -| | [Documentation] | Check that Honeycomb does not accept wrong values of \ -| | ... | vlan-type in tag-rewrite. -| | ... -| | Given rewrite tag from Honeycomb should be empty -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | When Honeycomb fails to set wrong rewrite tag -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... | ${tag_rewrite_translate_1_2_wrong} -| | Then rewrite tag from Honeycomb should be empty -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | And rewrite tag from VAT should be -| | ... | ${node} | ${sub_if_name} | ${tag_rewrite_disabled_VAT} - -| TC15: Honeycomb configures sub-interface ipv4 address -| | [Documentation] | Check if Honeycomb can configure an ipv4 address on the\ -| | ... | sub-interface. -| | ... -| | Given sub-interface ipv4 address from Honeycomb should be empty -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | And sub-interface ipv4 address from VAT should be empty -| | ... | ${node} | ${sub_if_name} -| | When Honeycomb sets sub-interface ipv4 address -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... | ${ipv4['address']} | ${ipv4['prefix-length']} -| | Then sub-interface ipv4 address from Honeycomb should be -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... | ${ipv4['address']} | ${ipv4['prefix-length']} -| | And sub-interface ipv4 address from VAT should be -| | ... | ${node} | ${sub_if_name} -| | ... | ${ipv4['address']} | ${ipv4['prefix-length']} - -| TC16: Honeycomb removes sub-interface ipv4 address -| | [Documentation] | Check if Honeycomb can remove configured ipv4 addresses\ -| | ... | from the sub-interface. -| | ... -| | Given sub-interface ipv4 address from Honeycomb should be -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... | ${ipv4['address']} | ${ipv4['prefix-length']} -| | Run Keyword And Continue On Failure -| | ... | And sub-interface ipv4 address from VAT should be -| | ... | ${node} | ${sub_if_name} -| | ... | ${ipv4['address']} | ${ipv4['prefix-length']} -| | When Honeycomb removes all sub-interface ipv4 addresses -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | Then sub-interface ipv4 address from Honeycomb should be empty -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | And sub-interface ipv4 address from VAT should be empty -| | ... | ${node} | ${sub_if_name} - -| TC17: Honeycomb modifies existing sub-interface ipv4 address -| | [Documentation] | Check if Honeycomb can modify an ipv4 address already\ -| | ... | configured on the sub-interface. -| | ... -| | [Teardown] | Honeycomb removes all sub-interface ipv4 addresses -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... -| | Given sub-interface ipv4 address from Honeycomb should be empty -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | And sub-interface ipv4 address from VAT should be empty -| | ... | ${node} | ${sub_if_name} -| | When Honeycomb sets sub-interface ipv4 address -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... | ${ipv4['address']} | ${ipv4['prefix-length']} -| | And Honeycomb sets sub-interface ipv4 address -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... | ${ipv4_2['address']} | ${ipv4_2['prefix-length']} -| | Then sub-interface ipv4 address from Honeycomb should be -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... | ${ipv4_2['address']} | ${ipv4_2['prefix-length']} -| | And sub-interface ipv4 address from VAT should be -| | ... | ${node} | ${sub_if_name} -| | ... | ${ipv4_2['address']} | ${ipv4_2['prefix-length']} - -| TC18: Honeycomb modifies sub-interface exact tag match -| | [Documentation] | Check if Honeycomb can modify a sub-interface with exact\ -| | ... | tag match. -| | ... -| | Given Honeycomb configures interface state | ${node} | ${super_if2} | down -| | And sub-interface Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${super_if2} | ${sub_if_id} -| | And interface Operational Data From VAT Should Be empty -| | ... | ${node} | ${sub_if2_name} -| | When Honeycomb creates sub-interface | ${node} | ${super_if2} -| | ... | ${sub_if_2_match} | ${sub_if_2_tags} | ${sub_if_2_settings} -| | Then Sub-interface Operational Data From Honeycomb Should Be -| | ... | ${node} | ${super_if2} | ${sub_if_id} | ${sub_if_2_oper} -| | And Sub-interface Operational Data From VAT Should Be -| | ... | ${node} | ${sub_if2_name} | ${sub_if_2_oper} -| | And sub-interface indices from Honeycomb and VAT should correspond -| | ... | ${node} | ${super_if2} | ${sub_if_id} - -| TC19: Honeycomb configures sub-interface ipv6 address -| | [Documentation] | Check if Honeycomb can configure an ipv6 address on the\ -| | ... | sub-interface. -| | ... -| | Given sub-interface ipv6 address from Honeycomb should be empty -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | And sub-interface ipv6 address from VAT should be empty -| | ... | ${node} | ${sub_if_name} -| | When Honeycomb sets sub-interface ipv6 address -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... | ${ipv6['address']} | ${ipv6['prefix-length']} -| | Then sub-interface IPv6 address from Honeycomb should contain -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... | ${ipv6['address']} | ${ipv6['prefix-length']} -| | And sub-interface IPv6 address from VAT should contain -| | ... | ${node} | ${sub_if_name} -| | ... | ${ipv6['address']} | ${ipv6['prefix-length']} - -| TC20: Honeycomb removes sub-interface ipv6 address -| | [Documentation] | Check if Honeycomb can remove configured ipv6 addresses\ -| | ... | from the sub-interface. -| | ... -| | Given sub-interface IPv6 address from Honeycomb should contain -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... | ${ipv6['address']} | ${ipv6['prefix-length']} -| | Run Keyword And Continue On Failure -| | ... | And sub-interface IPv6 address from VAT should contain -| | ... | ${node} | ${sub_if_name} -| | ... | ${ipv6['address']} | ${ipv6['prefix-length']} -| | When Honeycomb removes all sub-interface ipv6 addresses -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | Then sub-interface ipv6 address from Honeycomb should be empty -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | And sub-interface ipv6 address from VAT should be empty -| | ... | ${node} | ${sub_if_name} - -| TC21: Honeycomb modifies existing sub-interface ipv6 address -| | [Documentation] | Check if Honeycomb can modify an ipv6 address already\ -| | ... | configured on the sub-interface. -| | ... -| | [Teardown] | Honeycomb removes all sub-interface ipv6 addresses -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... -| | Given sub-interface ipv6 address from Honeycomb should be empty -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | And sub-interface ipv6 address from VAT should be empty -| | ... | ${node} | ${sub_if_name} -| | When Honeycomb sets sub-interface ipv6 address -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... | ${ipv6['address']} | ${ipv6['prefix-length']} -| | And Honeycomb sets sub-interface ipv6 address -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... | ${ipv6_2['address']} | ${ipv6_2['prefix-length']} -| | Then sub-interface IPv6 address from Honeycomb should contain -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... | ${ipv6_2['address']} | ${ipv6_2['prefix-length']} -| | And sub-interface IPv6 address from VAT should contain -| | ... | ${node} | ${sub_if_name} -| | ... | ${ipv6_2['address']} | ${ipv6_2['prefix-length']} - -| TC22: Honeycomb can configure unnumbered sub-interface -| | [Documentation] | Check if Honeycomb can configure an unnumbered interface\ -| | ... | on a sub-interface, borrowing the IP address of a physical interface. -| | ... -# CSIT-1210: Adapt HC unnumbered interface tests to VPP 18.07 api changes -| | [Tags] | EXPECTED_FAILING -| | ... -| | Given sub-interface ipv4 address from Honeycomb should be empty -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | And sub-interface ipv4 address from VAT should be empty -| | ... | ${node} | ${sub_if_name} -| | And Honeycomb sets interface IPv4 address | ${node} -| | ... | ${super_if2} | ${ipv4['address']} | ${ipv4['prefix-length']} -| | When Honeycomb adds unnumbered configuration to interface -| | ... | ${node} | ${super_if}.${sub_if_id} | ${super_if2} -| | Then IPv4 address from Honeycomb should be -| | ... | ${node} | ${super_if2} | ${ipv4['address']} | ${ipv4['prefix-length']} -| | And IPv4 address from VAT should be -| | ... | ${node} | ${super_if2} -| | ... | ${ipv4['address']} | ${ipv4['prefix-length']} | ${ipv4['netmask']} -| | And sub-interface ipv4 address from Honeycomb should be -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... | ${ipv4['address']} | ${ipv4['prefix-length']} -| | And sub-interface ipv4 address from VAT should be -| | ... | ${node} | ${sub_if_name} -| | ... | ${ipv4['address']} | ${ipv4['prefix-length']} - -| TC23: Honeycomb removes sub-interface unnumbered configuration -| | [Documentation] | Check if Honeycomb can remove unnumbered configuration\ -| | ... | from a sub-interface. -| | ... -| | [Teardown] | Honeycomb removes interface IPv4 addresses | ${node} -| | ... | ${super_if2} -| | ... -# CSIT-1210: Adapt HC unnumbered interface tests to VPP 18.07 api changes -| | [Tags] | EXPECTED_FAILING -| | ... -| | Given IPv4 address from Honeycomb should be -| | ... | ${node} | ${super_if2} | ${ipv4['address']} | ${ipv4['prefix-length']} -| | And IPv4 address from VAT should be -| | ... | ${node} | ${super_if2} -| | ... | ${ipv4['address']} | ${ipv4['prefix-length']} | ${ipv4['netmask']} -| | And sub-interface ipv4 address from Honeycomb should be -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... | ${ipv4['address']} | ${ipv4['prefix-length']} -| | And sub-interface ipv4 address from VAT should be -| | ... | ${node} | ${sub_if_name} -| | ... | ${ipv4['address']} | ${ipv4['prefix-length']} -| | When Honeycomb removes unnumbered configuration from interface -| | ... | ${node} | ${super_if}.${sub_if_id} -| | Then IPv4 address from Honeycomb should be -| | ... | ${node} | ${super_if2} | ${ipv4['address']} | ${ipv4['prefix-length']} -| | And IPv4 address from VAT should be -| | ... | ${node} | ${super_if2} -| | ... | ${ipv4['address']} | ${ipv4['prefix-length']} | ${ipv4['netmask']} -| | And sub-interface ipv4 address from Honeycomb should be empty -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | And sub-interface ipv4 address from VAT should be empty -| | ... | ${node} | ${sub_if_name} - -| TC24: Honeycomb can configure unnumbered interface using a sub-interface -| | [Documentation] | Check if Honeycomb can configure an unnumbered interface\ -| | ... | on an interface, borrowing the IP address of a sub-interface. -| | ... -# CSIT-1210: Adapt HC unnumbered interface tests to VPP 18.07 api changes -| | [Tags] | EXPECTED_FAILING -| | ... -| | Given IPv4 address from Honeycomb should be empty | ${node} | ${super_if2} -| | And ipv4 address from VAT should be empty | ${node} | ${super_if2} -| | And sub-interface ipv4 address from Honeycomb should be empty -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | And sub-interface ipv4 address from VAT should be empty -| | ... | ${node} | ${sub_if_name} -| | And Honeycomb sets sub-interface ipv4 address -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... | ${ipv4['address']} | ${ipv4['prefix-length']} -| | When Honeycomb adds unnumbered configuration to interface -| | ... | ${node} | ${super_if2} | ${super_if}.${sub_if_id} -| | Then IPv4 address from Honeycomb should be -| | ... | ${node} | ${super_if2} | ${ipv4['address']} | ${ipv4['prefix-length']} -| | And IPv4 address from VAT should be -| | ... | ${node} | ${super_if2} -| | ... | ${ipv4['address']} | ${ipv4['prefix-length']} | ${ipv4['netmask']} -| | And sub-interface ipv4 address from Honeycomb should be -| | ... | ${node} | ${super_if} | ${sub_if_id} -| | ... | ${ipv4['address']} | ${ipv4['prefix-length']} -| | And sub-interface ipv4 address from VAT should be -| | ... | ${node} | ${sub_if_name} -| | ... | ${ipv4['address']} | ${ipv4['prefix-length']} - -*** Keywords *** -| Set super and sub interfaces up -| | [Documentation] | Honeycomb sets super-interface and sub-interface up, in \ -| | ... | this order. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_interface - Super interface. Type: string -| | ... | - identifier - Sub-interface identifier. Type: integer or string -| | ... -| | ... | *Example:* -| | ... | \| Set super and sub interfaces up\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \| -| | ... -| | [Arguments] | ${node} | ${super_interface} | ${identifier} -| | ... -| | Honeycomb configures interface state -| | ... | ${node} | ${super_interface} | up -| | Honeycomb sets the sub-interface up -| | ... | ${node} | ${super_interface} | ${identifier} - -| Set super and sub interfaces down -| | [Documentation] | Honeycomb sets super-interface and sub-interface down, in\ -| | ... | this order. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_interface - Super interface. Type: string -| | ... | - identifier - Sub-interface identifier. Type: integer or string -| | ... -| | ... | *Example:* -| | ... | \| Set super and sub interfaces down\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \| -| | ... -| | [Arguments] | ${node} | ${super_interface} | ${identifier} -| | ... -| | Honeycomb configures interface state -| | ... | ${node} | ${super_interface} | down -| | Honeycomb sets the sub-interface down -| | ... | ${node} | ${super_interface} | ${identifier} - -| Honeycomb disables tag rewrite -| | [Documentation] | -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_if - Super-interface. Type: string -| | ... | - identifier - Sub-interface ID. Type: integer or string -| | ... -| | ... | *Example:* -| | ... | \| Honeycomb disables tag rewrite \ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \| -| | ... -| | [Arguments] | ${node} | ${super_if} | ${sub_if_id} -| | ... -| | Honeycomb configures tag rewrite -| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_disabled} diff --git a/tests/honeycomb/func/mgmt-cfg-intip4-intip6-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-intip4-intip6-apihc-apivat-func.robot deleted file mode 100644 index 36899ff6b4..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-intip4-intip6-apihc-apivat-func.robot +++ /dev/null @@ -1,317 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables *** -# Interface to run tests on. -| ${interface}= | ${node['interfaces']['port1']['name']} -| ${interface2}= | ${node['interfaces']['port2']['name']} -| ${interface3}= | ${node['interfaces']['port3']['name']} - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/fib.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/ip/ip6.robot -| Variables | resources/test_data/honeycomb/interface_ip.py -| ... -| Force Tags | HC_FUNC -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Documentation | *Honeycomb interface management test suite.* - -*** Test Cases *** -| TC01: Honeycomb configures and reads interface state -| | [Documentation] | Check if Honeycomb API can modify the admin state of\ -| | ... | VPP interfaces. -| | ... -| | Given Interface state from Honeycomb should be -| | ... | ${node} | ${interface} | down -| | And Interface state from VAT should be | ${node} | ${interface} | down -| | When Honeycomb configures interface state | ${node} | ${interface} | up -| | Then Interface state from Honeycomb should be -| | ... | ${node} | ${interface} | up -| | And Interface state from VAT should be | ${node} | ${interface} | up -| | When Honeycomb configures interface state | ${node} | ${interface} | down -| | Then Interface state from Honeycomb should be -| | ... | ${node} | ${interface} | down -| | And Interface state from VAT should be | ${node} | ${interface} | down - -| TC02: Honeycomb modifies interface IPv4 address with netmask -| | [Documentation] | Check if Honeycomb API can configure interfaces for ipv4\ -| | ... | with address and netmask provided. -| | ... -| | Given IPv4 address from Honeycomb should be empty | ${node} | ${interface} -| | And ipv4 address from VAT should be empty | ${node} | ${interface} -| | When Honeycomb sets interface IPv4 address | ${node} | ${interface} -| | ... | ${ipv4_address} | ${ipv4_mask} -| | Then IPv4 address from Honeycomb should be -| | ... | ${node} | ${interface} | ${ipv4_address} | ${ipv4_prefix} -| | And IPv4 address from VAT should be -| | ... | ${node} | ${interface} | ${ipv4_address} -| | ... | ${ipv4_prefix} | ${ipv4_mask} - -| TC03: Honeycomb removes IPv4 address from interface -| | [Documentation] | Check if Honeycomb API can remove configured ipv4\ -| | ... | addresses from interface. -| | ... -| | Given IPv4 address from Honeycomb should be -| | ... | ${node} | ${interface} | ${ipv4_address} | ${ipv4_prefix} -| | And IPv4 address from VAT should be -| | ... | ${node} | ${interface} | ${ipv4_address} -| | ... | ${ipv4_prefix} | ${ipv4_mask} -| | When Honeycomb removes interface IPv4 addresses | ${node} | ${interface} -| | Then IPv4 address from Honeycomb should be empty | ${node} | ${interface} -| | And ipv4 address from VAT should be empty | ${node} | ${interface} - -| TC04: Honeycomb modifies interface IPv4 address with prefix -| | [Documentation] | Check if Honeycomb API can configure interfaces for ipv4\ -| | ... | with address and prefix provided. -| | ... -| | [Teardown] | Honeycomb removes interface IPv4 addresses | ${node} -| | ... | ${interface} -| | ... -| | Given IPv4 address from Honeycomb should be empty | ${node} | ${interface} -| | And ipv4 address from VAT should be empty | ${node} | ${interface} -| | When Honeycomb sets interface IPv4 address with prefix -| | ... | ${node} | ${interface} | ${ipv4_address2} | ${ipv4_prefix} -| | Then IPv4 address from Honeycomb should be -| | ... | ${node} | ${interface} | ${ipv4_address2} | ${ipv4_prefix} -| | And IPv4 address from VAT should be -| | ... | ${node} | ${interface} | ${ipv4_address2} -| | ... | ${ipv4_prefix} | ${ipv4_mask} - -| TC05: Honeycomb modifies IPv4 neighbor table -| | [Documentation] | Check if Honeycomb API can add and remove ARP entries. -| | ... -| | [Teardown] | Honeycomb clears all interface IPv4 neighbors -| | ... | ${node} | ${interface} -| | ... -| | Given IPv4 neighbor from Honeycomb should be empty -| | ... | ${node} | ${interface} -| | When Honeycomb adds interface IPv4 neighbor -| | ... | ${node} | ${interface} | ${ipv4_neighbor} | ${neighbor_mac} -| | Then IPv4 neighbor from Honeycomb should be -| | ... | ${node} | ${interface} | ${ipv4_neighbor} | ${neighbor_mac} - -| TC06: Honeycomb modifies interface configuration - IPv6 -| | [Documentation] | Check if Honeycomb API can configure interfaces for ipv6. -| | ... -| | [Teardown] | Honeycomb removes interface IPv6 addresses | ${node} -| | ... | ${interface} -| | ... -| | Given IPv6 address from Honeycomb should be empty -| | ... | ${node} | ${interface} -| | And IPv6 address from VAT should be empty -| | ... | ${node} | ${interface} -| | When Honeycomb sets interface IPv6 address -| | ... | ${node} | ${interface} | ${ipv6_address} | ${ipv6_prefix} -| | Then IPv6 address from Honeycomb should contain -| | ... | ${node} | ${interface} | ${ipv6_address} | ${ipv6_prefix} -| | And IPv6 address from VAT should contain -| | ... | ${node} | ${interface} | ${ipv6_address} -| | ... | ${ipv6_prefix} | ${ipv6_mask} - -| TC07: Honeycomb modifies IPv6 neighbor table -| | [Documentation] | Check if Honeycomb API can add and remove ARP entries. -| | ... -| | [Teardown] | Honeycomb clears all interface IPv6 neighbors -| | ... | ${node} | ${interface} -| | ... -| | Given IPv6 neighbor from Honeycomb should be empty -| | ... | ${node} | ${interface} -| | When Honeycomb adds interface IPv6 neighbor -| | ... | ${node} | ${interface} | ${ipv6_neighbor} | ${neighbor_mac} -| | Then IPv6 neighbor from Honeycomb should be -| | ... | ${node} | ${interface} | ${ipv6_neighbor} | ${neighbor_mac} - -| TC08: Honeycomb modifies interface configuration - MTU -| | [Documentation] | Check if Honeycomb API can configure interface\ -| | ... | MTU value. -| | ... -| | When Honeycomb sets interface ethernet configuration -| | ... | ${node} | ${interface} | ${ethernet} -| | Then Interface ethernet Operational Data From Honeycomb Should Be -| | ... | ${node} | ${interface} | ${ethernet} -| | ${mtu}= | Create List | ${ethernet['mtu']} | ${0} | ${0} | ${0} -| | And Interface ethernet Operational Data From VAT Should Be -| | ... | ${node} | ${interface} | ${mtu} - -| TC09: Honeycomb modifies interface configuration - vrf -| | [Documentation] | Check if Honeycomb API can configure interface\ -| | ... | vrf ID. -| | ... -| | [Teardown] | Honeycomb interface VRF Test Teardown | ${node} | ${interface} -| | ... -| | Honeycomb configures FIB table | ${node} | ipv4 | ${1} -| | When Honeycomb sets interface VRF ID -| | ... | ${node} | ${interface} | ${1} | ipv4 -| | Then Interface VRF ID from Honeycomb should be -| | ... | ${node} | ${interface} | ${1} | ipv4 -| | And Interface VRF ID from VAT should be -| | ... | ${node} | ${interface} | ${1} - -| TC10: Honeycomb can configure multiple IP addresses on one interface -| | [Documentation] | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-ICMP; Eth-IPv6-ICMPv6 -| | ... | [Cfg] (Using Honeycomb API) On DUT1 set two IPv4 addresses\ -| | ... | and two IPv6 addresses on first interfaces to TG and add ARP entries\ -| | ... | for each address. -| | ... | [Ver] Send ICMP packets from TG to DUT, using different sets\ -| | ... | of source and destination IP addresses. Receive an ICMP reply\ -| | ... | for every packet sent. -| | ... -| | [Teardown] | Multiple IP Address Test Teardown | ${node} | ${dut_to_tg_if1} -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | When Honeycomb sets interface IPv4 address with prefix -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${ipv4_address} | ${ipv4_prefix} -| | And Honeycomb adds interface IPv4 address -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${ipv4_address2} | ${ipv4_prefix} -| | And Honeycomb sets interface IPv6 address -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${ipv6_address} | ${ipv6_prefix} -| | And Honeycomb adds interface IPv6 address -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${ipv6_address2} | ${ipv6_prefix} -| | Then IPv4 address from Honeycomb should be -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${ipv4_address} | ${ipv4_prefix} -| | And IPv4 address from VAT should be -| | ... | ${dut_node} | ${interface2} | ${ipv4_address} -| | ... | ${ipv4_prefix} | ${ipv4_mask} -| | And IPv6 address from Honeycomb should contain -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${ipv6_address} | ${ipv6_prefix} -| | And IPv6 address from VAT should contain -| | ... | ${dut_node} | ${interface2} | ${ipv6_address} -| | ... | ${ipv6_prefix} | ${ipv6_mask} -| | And Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if1} | up -| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${ipv4_neighbor} | ${neighbor_mac} -| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${ipv4_neighbor2} | ${neighbor_mac2} -| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${ipv6_neighbor} | ${neighbor_mac} -| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${ipv6_neighbor2} | ${neighbor_mac2} -| | And Vpp All Ra Suppress Link Layer | ${nodes} -| | Then Ping and Verify IP address | ${nodes['TG']} -| | ... | ${ipv4_neighbor} | ${ipv4_address} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if1} | ${dut_to_tg_if1_mac} -| | And Ping and Verify IP address | ${nodes['TG']} -| | ... | ${ipv4_neighbor2} | ${ipv4_address2} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if1} | ${dut_to_tg_if1_mac} -| | And Ping and Verify IP address | ${nodes['TG']} -| | ... | ${ipv6_neighbor} | ${ipv6_address} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if1} | ${dut_to_tg_if1_mac} -| | And Ping and Verify IP address | ${nodes['TG']} -| | ... | ${ipv6_neighbor2} | ${ipv6_address2} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if1} | ${dut_to_tg_if1_mac} - -| TC11: Honeycomb fails to configure two IPv4 addresses from the same subnet -| | [Documentation] | Check if Honeycomb can configure two IPv4 addresses in\ -| | ... | the same subnet onto a single interface. It should not be possible. -| | ... -| | [Teardown] | Honeycomb removes interface IPv4 addresses | ${node} -| | ... | ${interface} -| | ... -| | When Honeycomb sets interface IPv4 address with prefix -| | ... | ${node} | ${interface} | 192.168.0.1 | ${9} -| | Then Honeycomb fails to add interface IPv4 address -| | ... | ${node} | ${interface} | 192.168.0.2 | ${9} -| | And Honeycomb fails to add interface IPv4 address -| | ... | ${node} | ${interface} | 192.232.0.2 | ${9} - -| TC12: Honeycomb fails to configure two IPv6 addresses from the same subnet -| | [Documentation] | Check if Honeycomb can configure two IPv6 addresses in\ -| | ... | the same subnet onto a single interface. It should not be possible. -| | ... -| | [Teardown] | Honeycomb removes interface IPv6 addresses | ${node} -| | ... | ${interface} -| | When Honeycomb sets interface IPv6 address -| | ... | ${node} | ${interface} | 10::FF10 | ${64} -| | Then Honeycomb fails to add interface IPv6 address -| | ... | ${node} | ${interface} | 10::FF11 | ${64} -| | And Honeycomb fails to add interface IPv6 address -| | ... | ${node} | ${interface} | 10::FFFF | ${64} - -| TC13: Honeycomb can configure unnumbered interface -| | [Documentation] | Check if Honeycomb can configure an unnumbered interface\ -| | ... | on a physical interface, borrowing the IP address of another physical\ -| | ... | interface. -| | ... -# CSIT-1210: Adapt HC unnumbered interface tests to VPP 18.07 api changes -| | [Tags] | EXPECTED_FAILING -| | ... -| | Given Honeycomb sets interface IPv4 address | ${node} -| | ... | ${interface3} | ${ipv4_address} | ${ipv4_prefix} -| | When Honeycomb adds unnumbered configuration to interface -| | ... | ${node} | ${interface} | ${interface3} -| | Then Wait until Keyword succeeds | 10s | 2s -| | ... | IPv4 address from Honeycomb should be -| | ... | ${node} | ${interface3} | ${ipv4_address} | ${ipv4_prefix} -| | And IPv4 address from VAT should be -| | ... | ${node} | ${interface3} | ${ipv4_address} -| | ... | ${ipv4_prefix} | ${ipv4_mask} -| | And IPv4 address from Honeycomb should be -| | ... | ${node} | ${interface} | ${ipv4_address} | ${ipv4_prefix} -| | And IPv4 address from VAT should be -| | ... | ${node} | ${interface} | ${ipv4_address} -| | ... | ${ipv4_prefix} | ${ipv4_mask} - -| TC14: Honeycomb removes interface unnumbered configuration -| | [Documentation] | Check if Honeycomb can remove unnumbered configuration\ -| | ... | from an interface. -| | ... -# CSIT-1210: Adapt HC unnumbered interface tests to VPP 18.07 api changes -| | [Tags] | EXPECTED_FAILING -| | ... -| | Given IPv4 address from Honeycomb should be -| | ... | ${node} | ${interface3} | ${ipv4_address} | ${ipv4_prefix} -| | And IPv4 address from VAT should be -| | ... | ${node} | ${interface3} | ${ipv4_address} -| | ... | ${ipv4_prefix} | ${ipv4_mask} -| | And IPv4 address from Honeycomb should be -| | ... | ${node} | ${interface} | ${ipv4_address} | ${ipv4_prefix} -| | And IPv4 address from VAT should be -| | ... | ${node} | ${interface} | ${ipv4_address} -| | ... | ${ipv4_prefix} | ${ipv4_mask} -| | When Honeycomb removes unnumbered configuration from interface -| | ... | ${node} | ${interface} -| | Then Wait until Keyword succeeds | 10s | 2s -| | ... | IPv4 address from Honeycomb should be -| | ... | ${node} | ${interface3} | ${ipv4_address} | ${ipv4_prefix} -| | And IPv4 address from VAT should be -| | ... | ${node} | ${interface3} | ${ipv4_address} -| | ... | ${ipv4_prefix} | ${ipv4_mask} -| | And IPv4 address from Honeycomb should be empty | ${node} | ${interface} -| | And ipv4 address from VAT should be empty | ${node} | ${interface} - -*** Keywords *** -| Multiple IP Address Test Teardown -| | [Arguments] | ${node} | ${interface} -| | Honeycomb removes interface IPv4 addresses | ${node} | ${interface} -| | Honeycomb removes interface IPv6 addresses | ${node} | ${interface} -| | Honeycomb clears all interface IPv4 neighbors | ${node} | ${interface} -| | Honeycomb clears all interface IPv6 neighbors | ${node} | ${interface} - -| Honeycomb interface VRF Test Teardown -| | [Arguments] | ${node} | ${interface} -| | Honeycomb sets interface VRF ID | ${node} | ${interface} | ${0} | ipv4 -| | Honeycomb removes FIB configuration | ${node} | ipv4 | ${1} diff --git a/tests/honeycomb/func/mgmt-cfg-inttap-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-inttap-apihc-apivat-func.robot deleted file mode 100644 index 4b0b1d37ff..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-inttap-apihc-apivat-func.robot +++ /dev/null @@ -1,90 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables *** -# Interfaces to run tests on. -| ${interface}= | ${node['interfaces']['port1']['name']} -| ${tap_interface}= | tap_test -| ${tap_device_name}= | tap0 -# Configuration which will be set and verified during tests. -| &{tap_settings}= | host-interface-name=tap_test | mac=08:00:27:c0:5d:37 -| ... | id=${1} -| &{tap_settings_oper}= | device-name=tap0 | tx-ring-size=${256} -| ... | rx-ring-size=${256} | host-interface-name=tap_test -| ... | mac=08:00:27:c0:5d:37 | id=${1} -| &{tap_settings_vat}= | dev_name=tap0 | mac=08:00:27:c0:5d:37 -| ... | rx_ring_sz=${256} | tx_ring_sz=${256} | id=${1} -| &{tap_settings2}= | host-interface-name=tap_test | mac=08:00:27:60:26:ab -| ... | id=${2} -| &{tap_settings2_oper}= | device-name=tap0 | tx-ring-size=${256} -| ... | rx-ring-size=${256} | host-interface-name=tap_test -| ... | mac=08:00:27:60:26:ab | id=${1} -| &{tap_settings2_vat}= | dev_name=tap0 | mac=08:00:27:60:26:ab -| ... | rx_ring_sz=${256} | tx_ring_sz=${256} | id=${1} - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/tap.robot -| ... -| Force Tags | HC_FUNC -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Documentation | *Honeycomb TAP management test suite.* - -*** Test Cases *** -| TC01: Honeycomb configures TAP interface -| | [Documentation] | Check if Honeycomb API can configure a TAP interface. -| | ... -| | Given TAP Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${tap_interface} -| | And TAP Operational Data From VAT Should Be empty -| | ... | ${node} | ${tap_interface} -| | When Honeycomb creates TAP interface -| | ... | ${node} | ${tap_interface} | ${tap_settings} -| | Then TAP Operational Data From Honeycomb Should Be -| | ... | ${node} | ${tap_interface} | ${tap_settings_oper} -| | And TAP Operational Data From VAT Should Be -| | ... | ${node} | ${tap_device_name} | ${tap_settings_vat} - -| TC02: Honeycomb modifies existing TAP interface configuration -| | [Documentation] | Check if Honeycomb API can re-configure an existing TAP\ -| | ... | interface with new settings. -| | ... -| | Given TAP Operational Data From Honeycomb Should Be -| | ... | ${node} | ${tap_interface} | ${tap_settings_oper} -| | And TAP Operational Data From VAT Should Be -| | ... | ${node} | ${tap_device_name} | ${tap_settings_vat} -| | When Honeycomb configures TAP interface -| | ... | ${node} | ${tap_interface} | ${tap_settings2} -| | Then TAP Operational Data From Honeycomb Should Be -| | ... | ${node} | ${tap_interface} | ${tap_settings2_oper} -| | And TAP Operational Data From VAT Should Be -| | ... | ${node} | ${tap_device_name} | ${tap_settings2_vat} - -| TC03: Honeycomb removes TAP interface -| | [Documentation] | Check if Honeycomb API can remove TAP interface. -| | ... -| | Given TAP Operational Data From Honeycomb Should Be -| | ... | ${node} | ${tap_interface} | ${tap_settings2_oper} -| | And TAP Operational Data From VAT Should Be -| | ... | ${node} | ${tap_device_name} | ${tap_settings2_vat} -| | When Honeycomb removes TAP interface | ${node} | ${tap_interface} -| | Then TAP Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${tap_interface} -| | And TAP Operational Data From VAT Should Be empty -| | ... | ${node} | ${tap_device_name} diff --git a/tests/honeycomb/func/mgmt-cfg-intvhost-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-intvhost-apihc-apivat-func.robot deleted file mode 100644 index c5cbe6ea4a..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-intvhost-apihc-apivat-func.robot +++ /dev/null @@ -1,163 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables *** -| ${interface}= | ${node['interfaces']['port1']['name']} -| ${vhost_interface}= | test_vhost -| &{vhost_user_server}= | socket=/tmp/soc1 | role=server -| &{vhost_user_server_edit_1}= | socket=/tmp/soc12 | role=server -| &{vhost_user_server_edit_2}= | socket=/tmp/soc12 | role=client -| &{vhost_user_client}= | socket=/tmp/soc2 | role=client -| &{vhost_user_client_edit_1}= | socket=/tmp/soc22 | role=client -| &{vhost_user_client_edit_2}= | socket=/tmp/soc22 | role=server -| &{vhost_user_wrong}= | socket=/tmp/soc2 | role=wrong - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/vhost_user.robot -| ... -| Force Tags | HC_FUNC -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Documentation | *Honeycomb vhost-user interface management test suite.* - -*** Test Cases *** -| TC01: Honeycomb creates vhost-user interface - server -| | [Documentation] | Check if Honeycomb creates a vhost-user interface, role:\ -| | ... | server. -| | ... -| | Given vhost-user Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${vhost_interface} -| | When Honeycomb creates vhost-user interface -| | ... | ${node} | ${vhost_interface} | ${vhost_user_server} -| | Then vhost-user Operational Data From Honeycomb Should Be -| | ... | ${node} | ${vhost_interface} | ${vhost_user_server} -| | And vhost-user Operational Data From VAT Should Be -| | ... | ${node} | ${vhost_user_server} - -| TC02: Honeycomb modifies vhost-user interface - server -| | [Documentation] | Check if Honeycomb can modify properties of existing\ -| | ... | vhost-user interface, role: server. -| | ... -| | Given vhost-user Operational Data From Honeycomb Should Be -| | ... | ${node} | ${vhost_interface} | ${vhost_user_server} -| | When Honeycomb configures vhost-user interface -| | ... | ${node} | ${vhost_interface} | ${vhost_user_server_edit_1} -| | Then vhost-user Operational Data From Honeycomb Should Be -| | ... | ${node} | ${vhost_interface} | ${vhost_user_server_edit_1} -| | And vhost-user Operational Data From VAT Should Be -| | ... | ${node} | ${vhost_user_server_edit_1} -| | When Honeycomb configures vhost-user interface -| | ... | ${node} | ${vhost_interface} | ${vhost_user_server_edit_2} -| | Then vhost-user Operational Data From Honeycomb Should Be -| | ... | ${node} | ${vhost_interface} | ${vhost_user_server_edit_2} -| | And vhost-user Operational Data From VAT Should Be -| | ... | ${node} | ${vhost_user_server_edit_2} -| | When Honeycomb configures vhost-user interface -| | ... | ${node} | ${vhost_interface} | ${vhost_user_server} -| | Then vhost-user Operational Data From Honeycomb Should Be -| | ... | ${node} | ${vhost_interface} | ${vhost_user_server} -| | And vhost-user Operational Data From VAT Should Be -| | ... | ${node} | ${vhost_user_server} - -| TC03: Honeycomb deletes vhost-user interface - server -| | [Documentation] | Check if Honeycomb can delete an existing vhost-user\ -| | ... | interface, role: server. -| | ... -| | Given vhost-user Operational Data From Honeycomb Should Be -| | ... | ${node} | ${vhost_interface} | ${vhost_user_server} -| | When Honeycomb removes vhost-user interface -| | ... | ${node} | ${vhost_interface} -| | Then vhost-user Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${vhost_interface} -| | And vhost-user Operational Data From VAT Should Be empty -| | ... | ${node} - -| TC04: Honeycomb creates vhost-user interface - client -| | [Documentation] | Check if Honeycomb creates a vhost-user interface, role:\ -| | ... | client. -| | ... -| | Given vhost-user Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${vhost_interface} -| | When Honeycomb creates vhost-user interface -| | ... | ${node} | ${vhost_interface} | ${vhost_user_client} -| | Then vhost-user Operational Data From Honeycomb Should Be -| | ... | ${node} | ${vhost_interface} | ${vhost_user_client} -| | And vhost-user Operational Data From VAT Should Be -| | ... | ${node} | ${vhost_user_client} - -| TC05: Honeycomb modifies vhost-user interface - client -| | [Documentation] | Check if Honeycomb can modify properties of existing\ -| | ... | vhost-user interface, role: client. -| | ... -| | Given vhost-user Operational Data From Honeycomb Should Be -| | ... | ${node} | ${vhost_interface} | ${vhost_user_client} -| | When Honeycomb configures vhost-user interface -| | ... | ${node} | ${vhost_interface} | ${vhost_user_client_edit_1} -| | Then vhost-user Operational Data From Honeycomb Should Be -| | ... | ${node} | ${vhost_interface} | ${vhost_user_client_edit_1} -| | And vhost-user Operational Data From VAT Should Be -| | ... | ${node} | ${vhost_user_client_edit_1} -| | When Honeycomb configures vhost-user interface -| | ... | ${node} | ${vhost_interface} | ${vhost_user_client_edit_2} -| | Then vhost-user Operational Data From Honeycomb Should Be -| | ... | ${node} | ${vhost_interface} | ${vhost_user_client_edit_2} -| | And vhost-user Operational Data From VAT Should Be -| | ... | ${node} | ${vhost_user_client_edit_2} -| | When Honeycomb configures vhost-user interface -| | ... | ${node} | ${vhost_interface} | ${vhost_user_client} -| | Then vhost-user Operational Data From Honeycomb Should Be -| | ... | ${node} | ${vhost_interface} | ${vhost_user_client} -| | And vhost-user Operational Data From VAT Should Be -| | ... | ${node} | ${vhost_user_client} - -| TC06: Honeycomb deletes vhost-user interface - client -| | [Documentation] | Check if Honeycomb can delete an existing vhost-user\ -| | ... | interface, role: client. -| | ... -| | Given vhost-user Operational Data From Honeycomb Should Be -| | ... | ${node} | ${vhost_interface} | ${vhost_user_client} -| | When Honeycomb removes vhost-user interface -| | ... | ${node} | ${vhost_interface} -| | Then vhost-user Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${vhost_interface} -| | And vhost-user Operational Data From VAT Should Be empty -| | ... | ${node} - -| TC07: Honeycomb does not set vhost-user configuration on another interface type -| | [Documentation] | Check if Honeycomb refuses to set vhost-user\ -| | ... | configuration for interface which is not v3po:vhost-user type. -| | ... -| | When Honeycomb fails setting vhost-user on different interface type -| | ... | ${node} | ${interface} | ${vhost_user_server} -| | Then vhost-user Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${interface} -| | And vhost-user Operational Data From VAT Should Be empty -| | ... | ${node} - -| TC08: Honeycomb does not set invalid vhost-user configuration -| | [Documentation] | Check if Honeycomb refuses to set invalid parameters to\ -| | ... | vhost-user interface. -| | ... -| | Given vhost-user Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${vhost_interface} -| | When Honeycomb fails setting invalid vhost-user configuration -| | ... | ${node} | ${vhost_interface} | ${vhost_user_wrong} -| | Then vhost-user Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${vhost_interface} -| | And vhost-user Operational Data From VAT Should Be empty -| | ... | ${node} diff --git a/tests/honeycomb/func/mgmt-cfg-l2bd-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-l2bd-apihc-apivat-func.robot deleted file mode 100644 index 5f20c6c927..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-l2bd-apihc-apivat-func.robot +++ /dev/null @@ -1,116 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables *** -# Interfaces to run tests on. -| @{interfaces}= | ${node['interfaces']['port1']['name']} -| ... | ${node['interfaces']['port3']['name']} -# Configuration which will be set and verified during tests. -| ${bd1_name}= | bd-01 -| ${bd2_name}= | bd-02 -| &{bd_settings}= | flood=${True} | forward=${True} | learn=${True} -| ... | unknown-unicast-flood=${True} | arp-termination=${True} -| &{if_settings}= | split_horizon_group=${1} | bvi=${False} -| &{if_settings2}= | split_horizon_group=${2} | bvi=${True} - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Force Tags | HC_FUNC -| ... -| Documentation | *Honeycomb bridge domain management test suite.* - -*** Test Cases *** -| TC01: Honeycomb sets up l2 bridge domain -| | [Documentation] | Check if Honeycomb can create bridge domains on VPP node. -| | ... -| | When Honeycomb creates first l2 bridge domain -| | ... | ${node} | ${bd1_name} | ${bd_settings} -| | Then Bridge domain Operational Data From Honeycomb Should Be -| | ... | ${node} | ${bd1_name} | ${bd_settings} -| | And Bridge domain Operational Data From VAT Should Be -| | ... | ${node} | ${0} | ${bd_settings} - -| TC02: Honeycomb manages multiple bridge domains on node -| | [Documentation] | Check if Honeycomb can manage multiple bridge domains on\ -| | ... | a single node. -| | ... -| | Given Bridge domain Operational Data From Honeycomb Should Be -| | ... | ${node} | ${bd1_name} | ${bd_settings} -| | When Honeycomb creates l2 bridge domain -| | ... | ${node} | ${bd2_name} | ${bd_settings} -| | Then Bridge domain Operational Data From Honeycomb Should Be -| | ... | ${node} | ${bd1_name} | ${bd_settings} -| | And Bridge domain Operational Data From Honeycomb Should Be -| | ... | ${node} | ${bd2_name} | ${bd_settings} -| | And Bridge domain Operational Data From VAT Should Be -| | ... | ${node} | ${0} | ${bd_settings} -| | And Bridge domain Operational Data From VAT Should Be -| | ... | ${node} | ${1} | ${bd_settings} - -| TC03: Honeycomb removes bridge domains -| | [Documentation] | Check if Honeycomb can remove bridge domains from a VPP\ -| | ... | node. -| | ... -| | Given Bridge domain Operational Data From Honeycomb Should Be -| | ... | ${node} | ${bd1_name} | ${bd_settings} -| | When Honeycomb removes all bridge domains | ${node} -| | Then Honeycomb should show no bridge domains | ${node} -| | And PAPI should show no bridge domains | ${node} - -| TC04: Honeycomb assigns interfaces to bridge domain -| | [Documentation] | Check if Honeycomb can assign VPP interfaces to an\ -| | ... | existing bridge domain. -| | ... -| | Given Honeycomb creates first l2 bridge domain -| | ... | ${node} | ${bd1_name} | ${bd_settings} -| | When Honeycomb adds interfaces to bridge domain -| | ... | ${node} | @{interfaces} | ${bd1_name} | ${if_settings} -| | Then Bridge domain Operational Data From Honeycomb Should Be -| | ... | ${node} | ${bd1_name} | ${bd_settings} -| | And Bridge domain Operational Data From VAT Should Be -| | ... | ${node} | ${0} | ${bd_settings} -| | And Honeycomb should show interfaces assigned to bridge domain -| | ... | ${node} | @{interfaces} | ${bd1_name} | ${if_settings} -| | And PAPI should show interfaces assigned to bridge domain -| | ... | ${node} | ${0} | @{interfaces} | ${if_settings} - -| TC05: Honeycomb cannot remove bridge domain with an interface assigned -| | [Documentation] | Check if Honeycomb can remove a bridge domain that has an\ -| | ... | interface assigned to it. Expect to fail with code 500. -| | ... -| | Given Bridge domain Operational Data From Honeycomb Should Be -| | ... | ${node} | ${bd1_name} | ${bd_settings} -| | And Bridge domain Operational Data From VAT Should Be -| | ... | ${node} | ${0} | ${bd_settings} -| | And Honeycomb should show interfaces assigned to bridge domain -| | ... | ${node} | @{interfaces} | ${bd1_name} | ${if_settings} -| | And PAPI should show interfaces assigned to bridge domain -| | ... | ${node} | ${0} | @{interfaces} | ${if_settings} -| | When Run keyword and expect error | HoneycombError* Status code: 500. -| | ... | Honeycomb removes all bridge domains | ${node} -| | Then Bridge domain Operational Data From Honeycomb Should Be -| | ... | ${node} | ${bd1_name} | ${bd_settings} -| | And Bridge domain Operational Data From VAT Should Be -| | ... | ${node} | ${0} | ${bd_settings} -| | And Honeycomb should show interfaces assigned to bridge domain -| | ... | ${node} | @{interfaces} | ${bd1_name} | ${if_settings} -| | And PAPI should show interfaces assigned to bridge domain -| | ... | ${node} | ${0} | @{interfaces} | ${if_settings} diff --git a/tests/honeycomb/func/mgmt-cfg-l2fib-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-l2fib-apihc-apivat-func.robot deleted file mode 100644 index d13bb6354f..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-l2fib-apihc-apivat-func.robot +++ /dev/null @@ -1,232 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot -| Resource | resources/libraries/robot/honeycomb/l2_fib.robot -| Variables | resources/test_data/honeycomb/l2_fib.py | ${node} | ${interface} -| ... | ${interface2} -| ... -| Documentation | *Honeycomb L2 FIB management test suite.* -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Force Tags | HC_FUNC - -*** Variables *** -# Interface to run tests on. -| ${interface}= | ${node['interfaces']['port1']['name']} -| ${interface2}= | ${node['interfaces']['port3']['name']} - -*** Test Cases *** -| TC01: Honeycomb adds L2 FIB entry (forward) -| | [Documentation] | Honeycomb creates a bridge domain and assignes an \ -| | ... | interface to it. Then adds an L2 FIB entry (forward) to the bridge \ -| | ... | domain. -| | ... -| | [Teardown] | Honeycomb removes L2 FIB entry -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper['phys-address']} -| | ... -| | Given Interface state from Honeycomb should be -| | ... | ${node} | ${interface} | down -| | When Honeycomb configures interface state -| | ... | ${node} | ${interface} | up -| | Then Interface state from Honeycomb should be -| | ... | ${node} | ${interface} | up -| | When Honeycomb creates first l2 bridge domain -| | ... | ${node} | ${bd_name} | ${bd_settings} -| | Then Bridge domain Operational Data From Honeycomb Should Be -| | ... | ${node} | ${bd_name} | ${bd_settings} -| | Given Bridge domain Operational Interface Assignment should be empty -| | ... | ${node} | ${interface} -| | When Honeycomb adds interface to bridge domain -| | ... | ${node} | ${interface} | ${bd_name} | ${if_bd_settings} -| | Then Bridge domain Operational Interface Assignment should be -| | ... | ${node} | ${interface} | ${if_bd_settings} -| | Given L2 FIB Table from Honeycomb should be empty -| | ... | ${node} | ${bd_name} -| | And L2 FIB Table from PAPI should be empty -| | ... | ${node} | ${bd_index} -| | When Honeycomb adds L2 FIB entry to bridge domain -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg} -| | Then L2 FIB Entry from Honeycomb should be -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper} -| | And L2 FIB entry from PAPI should be -| | ... | ${node} | ${bd_index} | ${l2_fib_forward_vat} - -| TC02: Honeycomb adds L2 FIB entry (static, forward) -| | [Documentation] | Honeycomb adds an L2 FIB entry (static, forward) to the \ -| | ... | bridge domain. -| | ... -| | [Teardown] | Honeycomb removes L2 FIB entry -| | ... | ${node} | ${bd_name} | ${l2_fib_static_forward_oper['phys-address']} -| | ... -| | Given Bridge domain Operational Interface Assignment should be -| | ... | ${node} | ${interface} | ${if_bd_settings} -| | And L2 FIB Table from Honeycomb should be empty -| | ... | ${node} | ${bd_name} -| | And L2 FIB Table from PAPI should be empty -| | ... | ${node} | ${bd_index} -| | When Honeycomb adds L2 FIB entry to bridge domain -| | ... | ${node} | ${bd_name} | ${l2_fib_static_forward_cfg} -| | Then L2 FIB Entry from Honeycomb should be -| | ... | ${node} | ${bd_name} | ${l2_fib_static_forward_oper} -| | And L2 FIB entry from PAPI should be -| | ... | ${node} | ${bd_index} | ${l2_fib_static_forward_vat} - -| TC03: Honeycomb adds L2 FIB entry (static, filter) -| | [Documentation] | Honeycomb adds an L2 FIB entry (static, filter) to the \ -| | ... | bridge domain. -| | ... -| | [Teardown] | Honeycomb removes L2 FIB entry -| | ... | ${node} | ${bd_name} | ${l2_fib_filter_oper['phys-address']} -| | ... -| | Given Bridge domain Operational Interface Assignment should be -| | ... | ${node} | ${interface} | ${if_bd_settings} -| | And L2 FIB Table from Honeycomb should be empty -| | ... | ${node} | ${bd_name} -| | And L2 FIB Table from PAPI should be empty -| | ... | ${node} | ${bd_index} -| | When Honeycomb adds L2 FIB entry to bridge domain -| | ... | ${node} | ${bd_name} | ${l2_fib_filter_cfg} -| | Then L2 FIB Entry from Honeycomb should be -| | ... | ${node} | ${bd_name} | ${l2_fib_filter_oper} -| | And L2 FIB entry from PAPI should be -| | ... | ${node} | ${bd_index} | ${l2_fib_filter_vat} - -| TC04: Honeycomb adds and removes L2 FIB entry (forward) -| | [Documentation] | Honeycomb adds an L2 FIB entry (forward) to the bridge \ -| | ... | domain and then Honeycomb removes it from the bridge domain. -| | ... -| | [Teardown] | Honeycomb removes L2 FIB entry -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper['phys-address']} -| | ... -| | Given Bridge domain Operational Interface Assignment should be -| | ... | ${node} | ${interface} | ${if_bd_settings} -| | And L2 FIB Table from Honeycomb should be empty -| | ... | ${node} | ${bd_name} -| | And L2 FIB Table from PAPI should be empty -| | ... | ${node} | ${bd_index} -| | When Honeycomb adds L2 FIB entry to bridge domain -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg} -| | Then L2 FIB Entry from Honeycomb should be -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper} -| | And L2 FIB entry from PAPI should be -| | ... | ${node} | ${bd_index} | ${l2_fib_forward_vat} -| | When Honeycomb removes L2 FIB entry -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper['phys-address']} -| | Then L2 FIB Table from Honeycomb should be empty -| | ... | ${node} | ${bd_name} -| | And L2 FIB Table from PAPI should be empty -| | ... | ${node} | ${bd_index} - -| TC05: Honeycomb adds more than one L2 FIB entry -| | [Documentation] | Honeycomb adds three L2 FIB entries to the bridge domain. -| | ... -| | [Teardown] | Honeycomb removes all L2 FIB entries -| | ... | ${node} | ${bd_name} -| | ... -| | Given Bridge domain Operational Interface Assignment should be -| | ... | ${node} | ${interface} | ${if_bd_settings} -| | And L2 FIB Table from Honeycomb should be empty -| | ... | ${node} | ${bd_name} -| | And L2 FIB Table from PAPI should be empty -| | ... | ${node} | ${bd_index} -| | When Honeycomb adds L2 FIB entry to bridge domain -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg} -| | And Honeycomb adds L2 FIB entry to bridge domain -| | ... | ${node} | ${bd_name} | ${l2_fib_static_forward_cfg} -| | And Honeycomb adds L2 FIB entry to bridge domain -| | ... | ${node} | ${bd_name} | ${l2_fib_filter_cfg} -| | Then L2 FIB Entry from Honeycomb should be -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper} -| | And L2 FIB Entry from Honeycomb should be -| | ... | ${node} | ${bd_name} | ${l2_fib_static_forward_oper} -| | And L2 FIB Entry from Honeycomb should be -| | ... | ${node} | ${bd_name} | ${l2_fib_filter_oper} -| | And L2 FIB entry from PAPI should be -| | ... | ${node} | ${bd_index} | ${l2_fib_forward_vat} -| | And L2 FIB entry from PAPI should be -| | ... | ${node} | ${bd_index} | ${l2_fib_static_forward_vat} -| | And L2 FIB entry from PAPI should be -| | ... | ${node} | ${bd_index} | ${l2_fib_filter_vat} - -| TC06: Honeycomb fails to set wrong L2 FIB entry -| | [Documentation] | Honeycomb tries to add an L2 FIB entry with wrong \ -| | ... | parameters to the bridge domain. It must fail. -| | ... -| | [Teardown] | Honeycomb removes all L2 FIB entries -| | ... | ${node} | ${bd_name} -| | ... -| | Given Bridge domain Operational Interface Assignment should be -| | ... | ${node} | ${interface} | ${if_bd_settings} -| | And L2 FIB Table from Honeycomb should be empty -| | ... | ${node} | ${bd_name} -| | And L2 FIB Table from PAPI should be empty -| | ... | ${node} | ${bd_index} -| | When Honeycomb fails to add wrong L2 FIB entry -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg_wrong_mac} -| | Then L2 FIB Table from Honeycomb should be empty -| | ... | ${node} | ${bd_name} -| | And L2 FIB Table from PAPI should be empty -| | ... | ${node} | ${bd_index} -| | When Honeycomb fails to add wrong L2 FIB entry -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg_wrong_if} -| | Then L2 FIB Table from Honeycomb should be empty -| | ... | ${node} | ${bd_name} -| | And L2 FIB Table from PAPI should be empty -| | ... | ${node} | ${bd_index} -| | When Honeycomb fails to add wrong L2 FIB entry -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg_wrong_action} -| | Then L2 FIB Table from Honeycomb should be empty -| | ... | ${node} | ${bd_name} -| | And L2 FIB Table from PAPI should be empty -| | ... | ${node} | ${bd_index} - -| TC07: Honeycomb fails to modify existing L2 FIB entry -| | [Documentation] | Honeycomb tries to modify an existing L2 FIB entry. It \ -| | ... | must fail. -| | ... -| | [Teardown] | Honeycomb removes all L2 FIB entries -| | ... | ${node} | ${bd_name} -| | ... -| | Given Bridge domain Operational Interface Assignment should be -| | ... | ${node} | ${interface} | ${if_bd_settings} -| | And L2 FIB Table from Honeycomb should be empty -| | ... | ${node} | ${bd_name} -| | And L2 FIB Table from PAPI should be empty -| | ... | ${node} | ${bd_index} -| | When Honeycomb adds L2 FIB entry to bridge domain -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg} -| | Then L2 FIB Entry from Honeycomb should be -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper} -| | When Honeycomb fails to modify L2 FIB entry -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper['phys-address']} -| | ... | outgoing-interface -| | ... | ${l2_fib_forward_modified_cfg['outgoing-interface']} -| | Then L2 FIB Entry from Honeycomb should be -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper} -| | And L2 FIB entry from PAPI should be -| | ... | ${node} | ${bd_index} | ${l2_fib_forward_vat} - -*** Keywords *** -| Set test interface down -| | [Documentation] | Set the interface used in tests down. -| | ... -| | Honeycomb configures interface state -| | ... | ${node} | ${interface} | down diff --git a/tests/honeycomb/func/mgmt-cfg-lisp-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-lisp-apihc-apivat-func.robot deleted file mode 100644 index 0198e8205c..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-lisp-apihc-apivat-func.robot +++ /dev/null @@ -1,310 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables*** -| ${ip_address}= | 192.168.0.4 -| @{ip_addresses}= | 192.168.0.5 | 192.168.0.6 | 192.168.0.7 | 192.168.0.8 -| ${state}= | enabled -| ${interface}= | ${node['interfaces']['port1']['name']} -| ${bd_name}= | bd_lisp -| ${bd2_name}= | bd2_lisp -| &{bd_settings}= | flood=${True} | forward=${True} | learn=${True} -| ... | unknown-unicast-flood=${True} | arp-termination=${True} - -*** Settings *** -| Library | resources.libraries.python.Trace -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/lisp.robot -| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot -| Variables | resources/test_data/honeycomb/lisp/lisp.py -| ... -| Documentation | *Honeycomb Lisp test suite.* -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Force Tags | HC_FUNC - -*** Test Cases *** -| TC01: Honeycomb enables LISP feature -| | [Documentation] | Check if Honeycomb can enable the LISP feature. -| | ... -| | Given LISP Should Not Be Configured | ${node} -| | When Honeycomb enables LISP | ${node} -| | Then LISP state from Honeycomb should be | ${node} | ${state} -| | And LISP state from VAT should be | ${node} | ${state} - -| TC02: Honeycomb adds locator set and locator -| | [Documentation] | Check if Honeycomb can configure a locator set. -| | ... -| | Given LISP state from Honeycomb should be | ${node} | ${state} -| | When Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} -| | Then Locator Set From Honeycomb Should Be -| | ... | ${node} | ${interface} | ${locator_set} - -| TC15: Honeycomb can remove configuration of LISP features -| | [Documentation] | Check if Honeycomb can disable all LISP features. -| | ... -| | Given Locator Set From Honeycomb Should Be -| | ... | ${node} | ${interface} | ${locator_set} -| | When Honeycomb disables all LISP features | ${node} -| | Then LISP Should Not Be Configured | ${node} - -| TC03: Honeycomb configures LISP - remote mapping - Bridge Domain -| | [Documentation] | Check if Honeycomb can configure a remote LISP mapping\ -| | ... | with a bridge domain. -| | ... -| | Given Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} -| | And Honeycomb creates first l2 bridge domain -| | ... | ${node} | ${bd_name} | ${bd_settings} -| | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_remote_bd} -| | Then LISP mapping from Honeycomb should be -| | ... | ${node} | ${remote_bd_subtable} -| | And LISP mapping from VAT should be -| | ... | ${node} | ${vat_remote_bd} - -| TC04: Honeycomb can remove LISP mapping -| | [Documentation] | Check if Honeycomb can remove a configured LISP mapping. -| | ... -| | Given LISP mapping from Honeycomb should be -| | ... | ${node} | ${remote_bd_subtable} -| | And LISP mapping from VAT should be -| | ... | ${node} | ${vat_remote_bd} -| | When Honeycomb removes all LISP mappings | ${node} -| | Then LISP mappings from Honeycomb should not exist -| | ... | ${node} -| | And LISP mappings from VAT should not exist -| | ... | ${node} - -| TC05: Honeycomb configures LISP - remote mapping - VRF -| | [Documentation] | Check if Honeycomb can configure a remote LISP mapping\ -| | ... | with VRF. -| | ... -| | [Teardown] | Honeycomb removes all LISP mappings | ${node} -| | ... -| | Given LISP mappings from Honeycomb should not exist -| | ... | ${node} -| | And LISP mappings from VAT should not exist -| | ... | ${node} -| | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_remote_vrf} -| | Then LISP mapping from Honeycomb should be -| | ... | ${node} | ${remote_vrf_subtable} -| | And LISP mapping from VAT should be | ${node} | ${vat_remote_vrf} - -| TC06: Honeycomb configures LISP - local mapping - Bridge Domain -| | [Documentation] | Check if Honeycomb can configure a local LISP mapping\ -| | ... | with a bridge domain. -| | ... -| | [Teardown] | Honeycomb removes all LISP mappings | ${node} -| | ... -| | Given Locator Set From Honeycomb Should Be -| | ... | ${node} | ${interface} | ${locator_set} -| | And LISP mappings from Honeycomb should not exist -| | ... | ${node} -| | And LISP mappings from VAT should not exist -| | ... | ${node} -| | And Honeycomb creates first l2 bridge domain -| | ... | ${node} | ${bd2_name} | ${bd_settings} -| | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_local_bd} -| | Then LISP mapping from Honeycomb should be | ${node} | ${local_bd_subtable} -| | And LISP mapping from VAT should be | ${node} | ${vat_local_bd} - -| TC07: Honeycomb configures LISP - local mapping - VRF -| | [Documentation] | Check if Honeycomb can configure a local LISP mapping\ -| | ... | with VRF. -| | ... -| | [Teardown] | Honeycomb removes all LISP mappings | ${node} -| | ... -| | Given Locator Set From Honeycomb Should Be -| | ... | ${node} | ${interface} | ${locator_set} -| | And LISP mappings from Honeycomb should not exist -| | ... | ${node} -| | And LISP mappings from VAT should not exist -| | ... | ${node} -| | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_local_vrf} -| | Then LISP mapping from Honeycomb should be | ${node} | ${local_vrf_subtable} -| | And LISP mapping from VAT should be | ${node} | ${vat_local_vrf} - -| TC08: Honeycomb configures LISP mapping with adjacency -| | [Documentation] | Check if Honeycomb can configure local and remote LISP\ -| | ... | mappings with VRF, and configure adjacency. -| | ... -| | [Teardown] | Honeycomb disables all LISP features | ${node} -| | ... -| | Given Locator Set From Honeycomb Should Be -| | ... | ${node} | ${interface} | ${locator_set} -| | And LISP mappings from Honeycomb should not exist -| | ... | ${node} -| | And LISP mappings from VAT should not exist -| | ... | ${node} -| | And Honeycomb adds LISP mapping | ${node} | ${lisp_settings_both_vrf} -| | When Honeycomb adds LISP adjacency | ${node} | ${7} | remote_map_vrf -| | ... | adj01 | ${vrf_adjacency} -| | Then LISP mapping from Honeycomb should be -| | ... | ${node} | ${adj_subtable} - -| TC09: Honeycomb configures LISP Map Resolver -| | [Documentation] | Check if Honeycomb can configure a LISP Map Resolver. -| | ... -| | [Teardown] | Honeycomb disables all LISP features | ${node} -| | Given Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} -| | And LISP state from VAT should be | ${node} | ${state} -| | When Honeycomb adds LISP Map Resolver | ${node} | ${ip_address} -| | Then Map Resolver from Honeycomb should be | ${node} | ${ip_address} -| | And Map Resolver from VAT should be | ${node} | ${ip_address} - -| TC10: Honeycomb configures LISP Map Server -| | [Documentation] | Check if Honeycomb can configure a LISP Map Server. -| | ... -| | [Teardown] | Honeycomb disables all LISP features | ${node} -| | Given Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} -| | Given LISP state from Honeycomb should be | ${node} | ${state} -| | And LISP state from VAT should be | ${node} | ${state} -| | When Honeycomb adds LISP Map Server | ${node} | @{ip_addresses} -| | Then Map Server from Honeycomb should be | ${node} | @{ip_addresses} -| | And Map Server from VAT should be | ${node} | @{ip_addresses} - -| TC11: Honeycomb configures LISP PETR configuration -| | [Documentation] | Check if Honeycomb can configure LISP -| | ... | PETR configuration. -| | ... -| | [Teardown] | Honeycomb disables all LISP features | ${node} -| | Given Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} -| | Given LISP state from Honeycomb should be | ${node} | ${state} -| | And LISP state from VAT should be | ${node} | ${state} -| | When Honeycomb enables LISP PETR feature | ${node} | ${ip_address} -| | Then PETR configuration from Honeycomb should be | ${node} | ${ip_address} -| | And PETR configuration from VAT should be | ${node} | enabled - -| TC12: Honeycomb configures LISP RLOC Probing -| | [Documentation] | Check if Honeycomb can configure LISP RLOC Probing. -| | ... -| | [Teardown] | Honeycomb disables all LISP features | ${node} -| | Given Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} -| | Given LISP state from Honeycomb should be | ${node} | ${state} -| | And LISP state from VAT should be | ${node} | ${state} -| | When Honeycomb enables LISP RLOC feature | ${node} -| | Then RLOC Probing from Honeycomb should be | ${node} | ${True} -| | And RLOC Probing from VAT should be | ${node} | enabled - -| TC13: Honeycomb configures LISP Map Register -| | [Documentation] | Check if Honeycomb can configure a LISP Map Register. -| | ... -| | [Teardown] | Honeycomb disables all LISP features | ${node} -| | Given Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} -| | Given LISP state from Honeycomb should be | ${node} | ${state} -| | And LISP state from VAT should be | ${node} | ${state} -| | When Honeycomb adds LISP Map Register | ${node} | ${True} -| | Then Map Register from Honeycomb should be | ${node} | ${True} -| | And Map Register from VAT should be | ${node} | enabled - -| TC14: Honeycomb enabled LISP PITR feature -| | [Documentation] | Check if Honeycomb can configure the LISP PITR feature. -| | ... -# HC2VPP-263 Locator set reference in operational data is incorrect -| | [Tags] | EXPECTED_FAILING -| | [Teardown] | Honeycomb disables all LISP features | ${node} -| | Given Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} -| | When Honeycomb enables LISP PITR feature | ${node} | ${locator_set} -| | Then PITR config from Honeycomb should be | ${node} | ${locator_set} -| | And PITR config from VAT should be | ${node} | ${locator_set} - -| TC16: Honeycomb can configure LISP for traffic test - IPv4 -| | [Documentation] -| | ... | [Top] TG-DUT1-TG. -| | ... | [Enc] Eth-IPv4-LISP. -| | ... | [Cfg] On DUT1 configure IPv4 LISP static adjacencies with TG. -| | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces through\ -| | ... | DUT1 and verify LISP encapsulation of received packet. -| | ... | [Ref] RFC6830. -| | ... -| | [Teardown] | LISP Functional Traffic Test Teardown -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if1} | up -| | And Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if2} | up -| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip4} | ${prefix_len4} -| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip4} | ${prefix_len4} -| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${src_ip4} | ${tg_to_dut_if1_mac} -| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${tg_to_dut_if2_ip4} | ${tg_to_dut_if2_mac} -| | When Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${dut_to_tg_if2} | ${locator_set} -| | And Honeycomb adds LISP mapping | ${node} | ${lisp_traffic_ip4} -| | Then send packet and verify LISP encap -| | ... | ${tg_node} | ${src_ip4} | ${dst_ip4} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac} -| | ... | ${src_rloc4} | ${dst_rloc4} - -| TC17: Honeycomb can configure LISP for traffic test - IPv6 -| | [Documentation] -| | ... | [Top] TG-DUT1-TG. -| | ... | [Enc] Eth-IPv6-LISP. -| | ... | [Cfg] On DUT1 configure IPv6 LISP static adjacencies with TG. -| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces through\ -| | ... | DUT1 and verify LISP encapsulation of received packet. -| | ... | [Ref] RFC6830. -| | ... -| | [Teardown] | LISP Functional Traffic Test Teardown -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if1} | up -| | And Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if2} | up -| | And Honeycomb sets interface IPv6 address | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip6} | ${prefix_len6} -| | And Honeycomb sets interface IPv6 address | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip6} | ${prefix_len6} -| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${src_ip6} | ${tg_to_dut_if1_mac} -| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${tg_to_dut_if2_ip6} | ${tg_to_dut_if2_mac} -| | When Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${dut_to_tg_if2} | ${locator_set} -| | And Honeycomb adds LISP mapping | ${node} | ${lisp_traffic_ip6} -| | Then send packet and verify LISP encap -| | ... | ${tg_node} | ${src_ip6} | ${dst_ip6} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac} -| | ... | ${src_rloc6} | ${dst_rloc6} - -| TC18: Honeycomb configures LISP Map Request Mode -| | [Documentation] | Check if Honeycomb can configure LISP Map Request mode. -| | ... | Note: Map Request Mode cannot be removed once configured. -| | ... -| | [Teardown] | Honeycomb disables LISP | ${node} -| | ... -| | Given Honeycomb Enables LISP | ${node} -| | When Honeycomb sets LISP Map Request Mode | ${node} | ${True} -| | Then Map Request Mode from Honeycomb should be -| | ... | ${node} | source-destination -| | And Map Request Mode from VAT should be | ${node} | src-dst diff --git a/tests/honeycomb/func/mgmt-cfg-lispgpe-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-lispgpe-apihc-apivat-func.robot deleted file mode 100644 index a4d66b5581..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-lispgpe-apihc-apivat-func.robot +++ /dev/null @@ -1,226 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables*** -| ${interface}= | ${node['interfaces']['port1']['name']} - -*** Settings *** -| Library | resources.libraries.python.Trace -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/lisp_gpe.robot -| Variables | resources/test_data/honeycomb/lisp/lisp_gpe.py -| ... -| Documentation | *Honeycomb LISP GPE test suite.* -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Force Tags | HC_FUNC - -*** Test Cases *** -| TC01: Honeycomb enables LISP GPE feature -| | [Documentation] | Check if Honeycomb can enable the LISP GPE feature. -| | ... -| | Given LISP GPE Should Not Be Configured | ${node} -| | When Honeycomb enables LISP GPE | ${node} -| | Then LISP GPE state from Honeycomb should be | ${node} | enabled -| | And LISP GPE state from VAT should be | ${node} | enabled - -| TC02: Honeycomb disable LISP GPE feature -| | [Documentation] | Check if Honeycomb can enable the LISP GPE feature. -| | ... -| | [Teardown] | Honeycomb enables LISP GPE | ${node} -| | Given LISP GPE state from Honeycomb should be | ${node} | enabled -| | And LISP GPE state from VAT should be | ${node} | enabled -| | When Honeycomb disables LISP GPE | ${node} -| | Then LISP GPE state from Honeycomb should be | ${node} | disabled -| | And LISP GPE state from VAT should be | ${node} | disabled - -| TC03: Honeycomb configures LISP GPE mapping - negative, IPv4 -| | [Documentation] | Check if Honeycomb can configure a LISP mapping\ -| | ... | with VRF. -| | ... -| | Given LISP GPE mappings from Honeycomb should not exist -| | ... | ${node} -| | When Honeycomb adds first LISP GPE mapping -| | ... | ${node} | ${negative_mapping_ip4} -| | Then LISP GPE mapping from Honeycomb should be -| | ... | ${node} | ${negative_mapping_ip4} - -| TC04: Honeycomb can remove LISP GPE mapping -| | [Documentation] | Check if Honeycomb can remove a configured LISP GPE\ -| | ... | mapping. -| | ... -| | Given LISP GPE mapping from Honeycomb should be -| | ... | ${node} | ${negative_mapping_ip4} -| | When Honeycomb removes LISP GPE mapping -| | ... | ${node} | ${negative_mapping_ip4['id']} -| | Then LISP GPE mappings from Honeycomb should not exist -| | ... | ${node} - -| TC05: Honeycomb configures LISP GPE mapping - positive, IPv4 -| | [Documentation] | Check if Honeycomb can configure a LISP mapping\ -| | ... | with VRF. -| | ... -| | [Teardown] | Honeycomb removes LISP GPE mapping -| | ... | ${node} | ${positive_mapping_ip4['id']} -| | Given LISP GPE mappings from Honeycomb should not exist -| | ... | ${node} -| | When Honeycomb adds first LISP GPE mapping -| | ... | ${node} | ${positive_mapping_ip4} -| | Then LISP GPE mapping from Honeycomb should be -| | ... | ${node} | ${positive_mapping_ip4} - -| TC06: Honeycomb configures LISP GPE mapping - negative, IPv6 -| | [Documentation] | Check if Honeycomb can configure a LISP mapping\ -| | ... | with VRF. -| | ... -| | [Teardown] | Honeycomb removes LISP GPE mapping -| | ... | ${node} | ${negative_mapping_ip6['id']} -| | Given LISP GPE mappings from Honeycomb should not exist -| | ... | ${node} -| | When Honeycomb adds first LISP GPE mapping -| | ... | ${node} | ${negative_mapping_ip6} -| | Then LISP GPE mapping from Honeycomb should be -| | ... | ${node} | ${negative_mapping_ip6} - -| TC07: Honeycomb configures LISP GPE mapping - positive, IPv6 -| | [Documentation] | Check if Honeycomb can configure a LISP mapping\ -| | ... | with VRF. -| | ... -| | [Teardown] | Honeycomb removes LISP GPE mapping -| | ... | ${node} | ${positive_mapping_ip6['id']} -| | Given LISP GPE mappings from Honeycomb should not exist -| | ... | ${node} -| | When Honeycomb adds first LISP GPE mapping -| | ... | ${node} | ${positive_mapping_ip6} -| | Then LISP GPE mapping from Honeycomb should be -| | ... | ${node} | ${positive_mapping_ip6} - -| TC08: Honeycomb can modify existing LISP GPE mappping -| | [Documentation] | Check if Honeycomb can modify and existing LISP GPE\ -| | ... | mapping. -| | ... -| | [Teardown] | Honeycomb removes LISP GPE mapping -| | ... | ${node} | ${negative_mapping_ip4_edit['id']} -| | Given LISP GPE mappings from Honeycomb should not exist -| | ... | ${node} -| | When Honeycomb adds first LISP GPE mapping -| | ... | ${node} | ${negative_mapping_ip4} -| | Then LISP GPE mapping from Honeycomb should be -| | ... | ${node} | ${negative_mapping_ip4} -| | When Honeycomb adds first LISP GPE mapping | ${node} -| | ... | ${negative_mapping_ip4_edit} -| | Then LISP GPE mapping from Honeycomb should be -| | ... | ${node} | ${negative_mapping_ip4_edit} - -| TC09: Honeycomb can configure multiple LISP GPE mapppings -| | [Documentation] | Check if Honeycomb can configure multiple LISP GPE\ -| | ... | mappings at the same time. -| | ... -| | [Teardown] | Run Keywords -| | ... | Honeycomb removes LISP GPE mapping -| | ... | ${node} | ${negative_mapping_ip4['id']} -| | ... | AND | Honeycomb removes LISP GPE mapping -| | ... | ${node} | ${negative_mapping_ip4_2['id']} -| | Given LISP GPE mappings from Honeycomb should not exist -| | ... | ${node} -| | When Honeycomb adds first LISP GPE mapping -| | ... | ${node} | ${negative_mapping_ip4} -| | And Honeycomb adds LISP GPE mapping | ${node} | ${negative_mapping_ip4_2} -| | Then LISP GPE mapping from Honeycomb should be -| | ... | ${node} | ${negative_mapping_ip4} -| | And LISP GPE mapping from Honeycomb should be -| | ... | ${node} | ${negative_mapping_ip4_2} - -| TC10: Honeycomb can disable all LISP GPE features -| | [Documentation] | Check if Honeycomb can disable all LISP GPE features. -| | ... -| | Given Honeycomb adds first LISP GPE mapping -| | ... | ${node} | ${negative_mapping_ip4} -| | When Honeycomb disables all LISP GPE features | ${node} -| | Then LISP GPE mappings from Honeycomb should not exist -| | ... | ${node} -| | And LISP GPE state from Honeycomb should be | ${node} | disabled -| | And LISP GPE state from VAT should be | ${node} | disabled - -| TC11: Honeycomb can configure LISP GPE for traffic test - IPv4 -| | [Documentation] -| | ... | [Top] TG-DUT1-TG. -| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4 -| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1. -| | ... | [Ver] Case: ip4-lispgpe-ip4 - phy2lisp -| | ... | Make TG send ICMPv4 Echo Req between its interfaces through DUT1\ -| | ... | LISP GPE tunnel verify LISP encapsulation of received packet. -| | ... | [Ref] RFC6830. -| | ... -| | [Teardown] | LISPGPE functional traffic test teardown -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if1} | up -| | And Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if2} | up -| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip4} | ${prefix_len4} -| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip4} | ${prefix_len4} -| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${src_ip4} | ${tg_to_dut_if1_mac} -| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${tg_to_dut_if2_ip4} | ${tg_to_dut_if2_mac} -| | When Honeycomb enables LISP GPE | ${node} -| | And Honeycomb adds LISP GPE mapping | ${node} | ${lisp_traffic_ip4} -| | Then send packet and verify LISP GPE encap -| | ... | ${tg_node} | ${src_ip4} | ${dst_ip4} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac} -| | ... | ${src_rloc4} | ${dst_rloc4} - -| TC12: Honeycomb can configure LISP GPE for traffic test - IPv6 -| | [Documentation] -| | ... | [Top] TG-DUT1-TG. -| | ... | [Enc] Eth-IPv6-LISPGPE-IPv6-ICMPv6 -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1. -| | ... | [Ver] Case: ip6-lispgpe-ip6 - phy2lisp -| | ... | Make TG send ICMPv6 Echo Req between its interfaces through DUT1\ -| | ... | LISP GPE tunnel verify LISP encapsulation of received packet. -| | ... | [Ref] RFC6830. -| | ... -| | [Teardown] | LISPGPE functional traffic test teardown -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if1} | up -| | And Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if2} | up -| | And Honeycomb sets interface IPv6 address | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip6} | ${prefix_len6} -| | And Honeycomb sets interface IPv6 address | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip6} | ${prefix_len6} -| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${src_ip6} | ${tg_to_dut_if1_mac} -| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${tg_to_dut_if2_ip6} | ${tg_to_dut_if2_mac} -| | When Honeycomb enables LISP GPE | ${node} -| | And Honeycomb adds LISP GPE mapping | ${node} | ${lisp_traffic_ip6} -| | Then send packet and verify LISP GPE encap -| | ... | ${tg_node} | ${src_ip6} | ${dst_ip6} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac} -| | ... | ${src_rloc6} | ${dst_rloc6} diff --git a/tests/honeycomb/func/mgmt-cfg-nsh-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-nsh-apihc-apivat-func.robot deleted file mode 100644 index 46deef1692..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-nsh-apihc-apivat-func.robot +++ /dev/null @@ -1,148 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables*** -| ${super_if}= | ${node['interfaces']['port1']['name']} - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/nsh.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/vxlan_gpe.robot -| Variables | resources/test_data/honeycomb/nsh.py -| Variables | resources/test_data/honeycomb/vxlan_gpe.py -| ... -| Documentation | *Honeycomb NSH test suite.* -| ... -| Suite Setup | Run Keywords -| ... | Enable Honeycomb Feature | ${node} | NSH | AND -| ... | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Run Keywords -| ... | Tear Down Honeycomb Functional Test Suite | ${node} | AND -| ... | Disable Honeycomb Feature | ${node} | NSH -| ... -# NSH packages are not yet available in fd.io.stable.1710.* repos -| Force Tags | HC_FUNC | HC_NSH | EXPECTED_FAILING - -*** Test Cases *** -| TC01: Honeycomb can configure NSH entry -| | [Documentation] | Check if Honeycomb can configure an NSH entry. -| | ... -| | Given NSH Operational Data From Honeycomb Should Be empty | ${node} -| | When Honeycomb adds NSH entry | ${node} | entry1 | ${nsh_entry1} -| | Then NSH entry from Honeycomb should be -| | ... | ${node} | entry1 | ${nsh_entry1_oper} - -| TC02: Honeycomb can remove NSH entry -| | [Documentation] | Check if Honeycomb can remove an existing NSH entry. -| | ... -| | Given NSH entry from Honeycomb should be -| | ... | ${node} | entry1 | ${nsh_entry1_oper} -| | When Honeycomb removes NSH entry | ${node} | entry1 -| | Then NSH Operational Data From Honeycomb Should Be empty | ${node} - -| TC03: Honeycomb can configure new NSH entry -| | [Documentation] | Check if Honeycomb can configure an NSH antry after one\ -| | ... | has been deleted. -| | ... -| | [Teardown] | Honeycomb removes NSH entry | ${node} | entry2 -| | ... -| | Given NSH Operational Data From Honeycomb Should Be empty | ${node} -| | When Honeycomb adds NSH entry | ${node} | entry2 | ${nsh_entry2} -| | Then NSH entry from Honeycomb should be -| | ... | ${node} | entry2 | ${nsh_entry2_oper} - -| TC04: Honeycomb can configure multiple NSH entries at the same time -| | [Documentation] | Check if Honeycomb can configure an NSH entry when one\ -| | ... | already exists. -| | ... -| | [Teardown] | Honeycomb clears NSH configuration | ${node} -| | ... -| | Given NSH Operational Data From Honeycomb Should Be empty | ${node} -| | When Honeycomb adds NSH entry | ${node} | entry1 | ${nsh_entry1} -| | And Honeycomb adds NSH entry | ${node} | entry2 | ${nsh_entry2} -| | Then NSH entry from Honeycomb should be -| | ... | ${node} | entry1 | ${nsh_entry1_oper} -| | And NSH entry from Honeycomb should be -| | ... | ${node} | entry2 | ${nsh_entry2_oper} - -| TC05: Honeycomb can configure NSH map -| | [Documentation] | Check if Honeycomb can configure an NSH map. -| | ... -| | Given NSH Operational Data From Honeycomb Should Be empty | ${node} -| | And Honeycomb creates VxLAN GPE interface -| | ... | ${node} | ${vxlan_gpe_if1} -| | ... | ${vxlan_gpe_base_settings1} | ${vxlan_gpe_settings1} -| | When Honeycomb adds NSH entry | ${node} | entry1 | ${nsh_entry1} -| | And Honeycomb adds NSH map | ${node} | map1 | ${nsh_map1} -| | Then NSH map from Honeycomb should be | ${node} | map1 | ${nsh_map1_oper} - -| TC06: Honeycomb can remove NSH map -| | [Documentation] | Check if Honeycomb can remove an existing NSH map. -| | ... -| | Given NSH entry from Honeycomb should be -| | ... | ${node} | entry1 | ${nsh_entry1_oper} -| | And VxLAN GPE Operational Data From Honeycomb Should Be -| | ... | ${node} | ${vxlan_gpe_if1} -| | ... | ${vxlan_gpe_base_settings1} | ${vxlan_gpe_settings1} -| | And NSH map from Honeycomb should be | ${node} | map1 | ${nsh_map1_oper} -| | When Honeycomb removes NSH map | ${node} | map1 -| | Then NSH map from Honeycomb should not exist | ${node} | map1 -| | And NSH entry from Honeycomb should be -| | ... | ${node} | entry1 | ${nsh_entry1_oper} - -| TC07: Honeycomb can modify existing NSH map -| | [Documentation] | Check if Honeycomb can configure an NSH map after one\ -| | ... | has been deleted. -| | ... -| | [Teardown] | Honeycomb removes NSH map | ${node} | map1_edit -| | ... -| | Given NSH map from Honeycomb should not exist | ${node} | map1_edit -| | And NSH entry from Honeycomb should be -| | ... | ${node} | entry1 | ${nsh_entry1_oper} -| | And VxLAN GPE Operational Data From Honeycomb Should Be -| | ... | ${node} | ${vxlan_gpe_if1} -| | ... | ${vxlan_gpe_base_settings1} | ${vxlan_gpe_settings1} -| | When Honeycomb adds NSH map | ${node} | map1_edit | ${nsh_map1_edit} -| | Then NSH map from Honeycomb should be -| | ... | ${node} | map1_edit | ${nsh_map1_edit_oper} -| | And NSH entry from Honeycomb should be -| | ... | ${node} | entry1 | ${nsh_entry1_oper} - -| TC08: Honeycomb can configure multiple NSH maps at the same time -| | [Documentation] | Check if Honeycomb can configure and NSH map when one\ -| | ... | already exists. -| | ... -| | [Teardown] | Run Keywords -| | ... | Honeycomb clears NSH configuration | ${node} | AND -| | ... | Honeycomb removes VxLAN GPE interface -| | ... | ${node} | ${vxlan_gpe_if1} | AND -| | ... | Honeycomb removes VxLAN GPE interface -| | ... | ${node} | ${vxlan_gpe_if2} -| | ... -| | Given NSH map from Honeycomb should not exist | ${node} | map2 -| | And NSH entry from Honeycomb should be -| | ... | ${node} | entry1 | ${nsh_entry1_oper} -| | And VxLAN GPE Operational Data From Honeycomb Should Be -| | ... | ${node} | ${vxlan_gpe_if1} -| | ... | ${vxlan_gpe_base_settings1} | ${vxlan_gpe_settings1} -| | And Honeycomb creates VxLAN GPE interface -| | ... | ${node} | ${vxlan_gpe_if2} -| | ... | ${vxlan_gpe_base_settings2} | ${vxlan_gpe_settings2} -| | When Honeycomb adds NSH map | ${node} | map1 | ${nsh_map1} -| | And Honeycomb adds NSH map | ${node} | map2 | ${nsh_map2} -| | Then NSH map from Honeycomb should be -| | ... | ${node} | map1 | ${nsh_map1_oper} -| | And NSH map from Honeycomb should be -| | ... | ${node} | map2 | ${nsh_map2_oper} diff --git a/tests/honeycomb/func/mgmt-cfg-pbb-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-pbb-apihc-apivat-func.robot deleted file mode 100644 index 4547c0c4bf..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-pbb-apihc-apivat-func.robot +++ /dev/null @@ -1,86 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables*** -| ${super_if}= | ${node['interfaces']['port1']['name']} - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/provider_backbone_bridge.robot -| Variables | resources/test_data/honeycomb/pbb/pbb.py -| ... -| Documentation | *Honeycomb provider backbone bridge test suite.* -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Force Tags | HC_FUNC - -*** Test Cases *** -# TODO: add verifications once operational data or VPP dump is available. -| TC01: Honeycomb sets PBB sub-interface -| | [Documentation] | Honeycomb creates a new PBB sub-interface. -| | ... -| | Honeycomb creates PBB sub-interface | ${node} | ${super_if} -| | ... | ${cfg_pbb_sub_if_1} - -| TC02: Honeycomb modifies existing PBB sub-interface -| | [Documentation] | Honeycomb modifies an existing PBB sub-interface. -| | ... -| | Honeycomb creates PBB sub-interface | ${node} | ${super_if} -| | ... | ${cfg_pbb_sub_if_1_mod} - -| TC03: Honeycomb deletes existing PBB sub-interface -| | [Documentation] | Honeycomb deletes an existing PBB sub-interface. -| | ... -| | Honeycomb removes PBB sub-interface -| | ... | ${node} | ${super_if} - -| TC04: Honeycomb fails to set wrong destination-address for new PBB sub-interface -| | [Documentation] | Honeycomb fails to create a new PBB sub-interface with\ -| | ... | wrong value of parameter destination-address, type yang:mac-address. -| | ... -| | Honeycomb fails to create PBB sub-interface | ${node} | ${super_if} -| | ... | ${cfg_pbb_sub_if_wrong_dst_addr} - -| TC05: Honeycomb fails to set wrong source-address for new PBB sub-interface -| | [Documentation] | Honeycomb fails to create a new PBB sub-interface with\ -| | ... | wrong value of parameter source-address, type yang:mac-address. -| | ... -| | Honeycomb fails to create PBB sub-interface | ${node} | ${super_if} -| | ... | ${cfg_pbb_sub_if_wrong_src_addr} - -| TC06: Honeycomb fails to set wrong b-vlan-tag-vlan-id for new PBB sub-interface -| | [Documentation] | Honeycomb fails to create a new PBB sub-interface with\ -| | ... | wrong value of parameter b-vlan-tag-vlan-id, type uint16, 12 bit\ -| | ... | range, range 1..4095. -| | ... -| | Honeycomb fails to create PBB sub-interface | ${node} | ${super_if} -| | ... | ${cfg_pbb_sub_if_wrong_vlan_tag} - -| TC07: Honeycomb fails to set wrong i-tag-isid for new PBB sub-interface -| | [Documentation] | Honeycomb fails to create a new PBB sub-interface with\ -| | ... | wrong value of parameter i-tag-isid, type uint32, 24 bit range,\ -| | ... | range 1..16777215. -| | ... -| | Honeycomb fails to create PBB sub-interface | ${node} | ${super_if} -| | ... | ${cfg_pbb_sub_if_wrong_i_tag} - -| TC08: Honeycomb fails to create new PBB sub-interface without vlan tag -| | [Documentation] | Honeycomb fails to create a new PBB sub-interface without\ -| | ... | parameter b-vlan-tag-vlan-id. -| | ... -| | Honeycomb fails to create PBB sub-interface | ${node} | ${super_if} -| | ... | ${cfg_pbb_sub_if_no_vlan_tag} diff --git a/tests/honeycomb/func/mgmt-cfg-pluginacl-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-pluginacl-apihc-apivat-func.robot deleted file mode 100644 index ca717ae42f..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-pluginacl-apihc-apivat-func.robot +++ /dev/null @@ -1,781 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables *** -| &{if_settings}= | enabled=True -# Bridge domain settings -| ${bd_name}= | bd1 -| &{bd_settings}= | flood=${True} | forward=${True} | learn=${True} -| ... | unknown-unicast-flood=${True} | arp-termination=${False} -| &{bd_if_settings}= | split_horizon_group=${0} | bvi=${False} -# Names for AC lists -| ${acl_name_macip}= | macip -| ${acl_name_l3_ip4}= | acl_l3_ip4 -| ${acl_name_l3_ip6}= | acl_l3_ip6 -| ${acl_name_l4}= | acl_l4 -| ${acl_name_mixed}= | acl_mixed -| ${acl_name_icmp}= | acl_icmp -| ${acl_name_icmpv6}= | acl_icmpv6 -| ${acl_name_reflex}= | acl_reflex - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot -| Resource | resources/libraries/robot/honeycomb/access_control_lists.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| Library | resources.libraries.python.honeycomb.HcAPIKwACL.ACLKeywords -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.IPv6Util -| ... -| Test Setup | Clear Packet Trace on All DUTs | ${nodes} -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Documentation | *Honeycomb access control lists test suite for ACL plugin.* -| ... -| Force Tags | HC_FUNC - -*** Test Cases *** -| TC01: ACL MAC filtering through plugin-acl node - bridged -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ -| | ... | and configure L2 MAC ACL on ingress interface. -| | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ -| | ... | using different MACs. Receive all packets except those with\ -| | ... | MACs in the filtered ranges. -| | ... -| | [Teardown] | Bridged ACL test teardown -| | ... -| | Given Setup Interfaces And Bridge Domain For plugin-acl Test -| | ... | macip | ${acl_name_macip} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_macip} | ${acl_settings} | macip=${True} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_macip} -| | ... | ingress | macip=${True} -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${classify_src} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${classify_src2} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} - -| TC02: ACL IPv4 filtering through plugin-acl node - bridged -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ -| | ... | and configure L3 IPv4 ACL on ingress interface with src/dst IP -| | ... | and protocol number. -| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ -| | ... | to the other, using different IPv4 IPs. Receive all packets except\ -| | ... | those with IPs in the filtered ranges and UDP protocol payload. -| | ... -# HC2VPP-337: enable after ACL test failures in ODL tests are fixed -| | [Tags] | HC_REST_ONLY -| | ... -| | [Teardown] | Bridged ACL test teardown -| | ... -| | Given Setup Interfaces And Bridge Domain For plugin-acl Test -| | ... | l3_ip4 | ${acl_name_l3_ip4} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_l3_ip4} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l3_ip4} | ingress -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | UDP | ${src_port} | ${dst_port} -| | And Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | UDP | ${src_port} | ${dst_port} - -| TC03: ACL IPv6 filtering through plugin-acl node - bridged -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv6-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ -| | ... | and configure L3 IPv6 ACL on ingress interface with src/dst IP -| | ... | and protocol number. -| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ -| | ... | to the other, using different IPv6 IPs. Receive all packets except\ -| | ... | those with IPs in the filtered ranges and UDP protocol payload. -| | ... -# HC2VPP-337: enable after ACL test failures in ODL tests are fixed -| | [Tags] | HC_REST_ONLY -| | ... -| | [Teardown] | Bridged ACL test teardown -| | ... -| | Given Setup interfaces and bridge domain for plugin-acl test -| | ... | l3_ip6 | ${acl_name_l3_ip6} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_l3_ip6} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l3_ip6} | ingress -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | UDP | ${src_port} | ${dst_port} -| | And Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | UDP | ${src_port} | ${dst_port} - -| TC04: ACL port filtering through plugin-acl node - bridged -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ -| | ... | and and configure L4 port ACL on ingress interface -| | ... | with src/dst port ranges. -| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ -| | ... | to the other, using different ports. Receive all packets except\ -| | ... | those with ports in the filtered ranges. -| | ... -# HC2VPP-337: enable after ACL test failures in ODL tests are fixed -| | [Tags] | HC_REST_ONLY -| | ... -| | [Teardown] | Bridged ACL test teardown -| | ... -| | Given Setup interfaces and bridge domain for plugin-acl test -| | ... | L4 | ${acl_name_l4} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_l4} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l4} | ingress -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${classify_src} | ${classify_dst} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${classify_src+5} | ${classify_dst+5} - -| TC05: ACL filtering with IPv4 address and TCP port in one rule - bridged -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ -| | ... | and configure a mixed rule with src/dst IP, TCP protocol -| | ... | and port ranges. -| | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ -| | ... | using IPs and ports. Receive all packets except those with\ -| | ... | both IPs and ports in the filtered ranges. -| | ... -# HC2VPP-337: enable after ACL test failures in ODL tests are fixed -| | [Tags] | HC_REST_ONLY -| | ... -| | [Teardown] | Bridged ACL test teardown -| | ... -| | Given Setup Interfaces And Bridge Domain For plugin-acl Test -| | ... | mixed | ${acl_name_mixed} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_mixed} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_mixed} | ingress -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src_ip} | ${classify_dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src_ip} | ${classify_dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${classify_src_port} | ${classify_dst_port} - -| TC06: ACL ICMP packet filtering - bridged -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-ICMP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ -| | ... | and configure a ICMP protocol filtering by ICMP type and code. -| | ... | [Ver] Send ICMP packets from one TG interface\ -| | ... | to the other, using different codes and types. Receive all packets\ -| | ... | except those with types and codes in the filtered ranges. -| | ... -# HC2VPP-337: enable after ACL test failures in ODL tests are fixed -| | [Tags] | HC_REST_ONLY -| | ... -| | [Teardown] | Bridged ACL test teardown -| | ... -| | Given Setup interfaces and bridge domain for plugin-acl test -| | ... | icmp | ${acl_name_icmp} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_icmp} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmp} | ingress -| | Then Send ICMP packet with type and code and verify received packet -| | ... | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${icmp_type} | ${icmp_code} -| | Then Send ICMP packet with type and code and verify received packet -| | ... | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${classify_type} | ${icmp_code} -| | And Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet with type and code and verify received packet -| | ... | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${classify_type} | ${classify_code} - -| TC07: ACL ICMPv6 packet filtering - bridged -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv6-ICMP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ -| | ... | and configure a ICMPv6 protocol filtering by ICMPv6 type and code. -| | ... | [Ver] Send ICMPv6 packets from one TG interface\ -| | ... | to the other, using different codes and types. Receive all packets\ -| | ... | except those with the filtered type and code. -| | ... -# HC2VPP-337: enable after ACL test failures in ODL tests are fixed -| | [Tags] | HC_REST_ONLY -| | ... -| | [Teardown] | Bridged ACL test teardown -| | ... -| | Given Setup interfaces and bridge domain for plugin-acl test -| | ... | icmpv6 | ${acl_name_icmpv6} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_icmpv6} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmpv6} | ingress -| | Then Send ICMP packet with type and code and verify received packet -| | ... | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${icmp_type} | ${icmp_code} -| | Then Send ICMP packet with type and code and verify received packet -| | ... | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${classify_type} | ${icmp_code} -| | And Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet with type and code and verify received packet -| | ... | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${classify_type} | ${classify_code} - -| TC08: ACL reflexive IPv4 filtering through plugin-acl node - bridged -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG,\ -| | ... | configure a "drop all" ACL on ingress and reflexive ACL on egress. -| | ... | [Ver] Send a simple TCP packet to VPP interface 1 and do not receive\ -| | ... | it back. Then send the packet with reversed src/dst IP address\ -| | ... | to VPP interface 2 and receive it from interface 1(this should create\ -| | ... | a reflexive "permit" rule) Finally, send the original packet again\ -| | ... | and receive it from interface 2. -| | ... -# CSIT-863: running ODL and HC on single node may cause out of memory errors -| | [Tags] | HC_REST_ONLY -| | ... -| | [Teardown] | Bridged ACL test teardown -| | ... -| | Given Setup Interfaces And Bridge Domain For plugin-acl Test -| | ... | reflex | ${acl_name_reflex} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_reflex} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_reflex} | egress -| | And Import Variables | resources/test_data/honeycomb/plugin_acl.py -| | ... | block_all | block_all -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | block_all | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | block_all | ingress -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_dst} | ${classify_src} -| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if2_mac} -| | ... | ${tg_to_dut_if1} | ${dut_to_tg_if2_mac} -| | ... | TCP | ${dst_port} | ${src_port} -| | And Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} - -# Routing section -# =============== - -| TC09: ACL IPv4 filtering through plugin-acl node - routed -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ -| | ... | interfaces to TG, add ARP entry and routes, and configure L3 IPv4 ACL\ -| | ... | on ingress interface with src/dst IP and protocol. -| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ -| | ... | to the other, using different IPv4 IPs. Receive all packets except\ -| | ... | those with IPs in the filtered ranges and UDP protocol payload. -| | ... -# CSIT-863: running ODL and HC on single node may cause out of memory errors -| | [Tags] | HC_REST_ONLY -| | ... -| | [Teardown] | Routed ACL test teardown - ipv4 -| | ... -| | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test -| | ... | l3_ip4 | ${acl_name_l3_ip4} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_l3_ip4} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l3_ip4} | ingress -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | UDP | ${src_port} | ${dst_port} -| | And Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | UDP | ${src_port} | ${dst_port} - -| TC10: ACL IPv6 filtering through plugin-acl node - routed -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv6-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv6 addresses on both\ -| | ... | interfaces to TG, add IP neighbor entry and routes, and configure\ -| | ... | L3 IPv6 ACL on ingress interface with src/dst IP and next-header. -| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ -| | ... | to the other, using different IPv6 IPs. Receive all packets except\ -| | ... | those with IPs in the filtered ranges and UDP protocol payload. -| | ... -# CSIT-863: running ODL and HC on single node may cause out of memory errors -| | [Tags] | HC_REST_ONLY -| | ... -| | [Teardown] | Routed ACL test teardown - ipv6 -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Import Variables | resources/test_data/honeycomb/plugin_acl.py -| | ... | L3_IP6 | ${acl_name_l3_ip6} -| | And Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if1} | up -| | And Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if2} | up -| | And Honeycomb sets interface IPv6 address | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} -| | And Honeycomb sets interface IPv6 address | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} -| | And VPP RA suppress link layer | ${dut_node} | ${dut_to_tg_if2} -| | And Honeycomb adds interface IPv6 neighbor -| | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac} -| | And VPP Route Add | ${node} | ${dst_net} | ${prefix_length} -| | ... | gateway=${gateway} | interface=${dut_to_tg_if2} -| | And VPP Route Add | ${node} | ${classify_dst_net} | ${prefix_length} -| | ... | gateway=${gateway} | interface=${dut_to_tg_if2} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_l3_ip6} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l3_ip6} | ingress -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | UDP | ${src_port} | ${dst_port} -| | And Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | UDP | ${src_port} | ${dst_port} - -| TC11: ACL port filtering through plugin-acl node - routed -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ -| | ... | interfaces to TG, add ARP entry and routes, and configure L4 port ACL\ -| | ... | on ingress interface with src/dst port ranges. -| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ -| | ... | to the other, using different ports. Receive all packets except\ -| | ... | those with ports in the filtered ranges. -| | ... -| | [Teardown] | Routed ACL test teardown - ipv4 -| | ... -# CSIT-863: running ODL and HC on single node may cause out of memory errors -| | [Tags] | HC_REST_ONLY -| | ... -| | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test -| | ... | L4 | ${acl_name_l4} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_l4} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l4} | ingress -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${classify_src} | ${classify_dst} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${classify_src+5} | ${classify_dst+5} - -| TC12: ACL filtering with IPv4 address and TCP port in one rule - routed -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ -| | ... | interfaces to TG, add ARP entry and routes and configure a mixed -| | ... | rule with src/dst IP, TCP protocol and port ranges. -| | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ -| | ... | using IPs and ports. Receive all packets except those with\ -| | ... | both IPs and ports in the filtered ranges. -| | ... -| | [Teardown] | Routed ACL test teardown - ipv4 -| | ... -# CSIT-863: running ODL and HC on single node may cause out of memory errors -| | [Tags] | HC_REST_ONLY -| | ... -| | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test -| | ... | mixed | ${acl_name_mixed} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_mixed} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_mixed} | ingress -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src_ip} | ${classify_dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src_ip} | ${classify_dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dst_mac} -| | ... | TCP | ${classify_src_port} | ${classify_dst_port} - -| TC13: ACL ICMP packet filtering - routed -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ -| | ... | interfaces to TG, add ARP entry and routes, and configure ICMP ACL\ -| | ... | on ingress interface with ICMP type and code. -| | ... | [Ver] Send ICMP packets from one TG interface\ -| | ... | to the other, using different codes and types. Receive all packets\ -| | ... | except those with the filtered type and code. -| | ... -| | [Teardown] | Routed ACL test teardown - ipv4 -| | ... -# CSIT-863: running ODL and HC on single node may cause out of memory errors -| | [Tags] | HC_REST_ONLY -| | ... -| | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test -| | ... | icmp | ${acl_name_icmp} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_icmp} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmp} | ingress -| | Then Send ICMP packet with type and code and verify received packet -| | ... | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${icmp_type} | ${icmp_code} -| | Then Send ICMP packet with type and code and verify received packet -| | ... | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${classify_type} | ${icmp_code} -| | And Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet with type and code and verify received packet -| | ... | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${classify_type} | ${classify_code} - -| TC14: ACL ICMPv6 packet filtering - routed -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv6 addresses on both\ -| | ... | interfaces to TG, add ARP entry and routes, and configure ICMP ACL\ -| | ... | on ingress interface with ICMPv6 type and code. -| | ... | [Ver] Send ICMPv6 packets from one TG interface\ -| | ... | to the other, using different codes and types. Receive all packets\ -| | ... | except those with the filtered type and code. -| | ... -# CSIT-863: running ODL and HC on single node may cause out of memory errors -| | [Tags] | HC_REST_ONLY -| | ... -| | [Teardown] | Routed ACL test teardown - ipv6 -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Import Variables | resources/test_data/honeycomb/plugin_acl.py -| | ... | icmpv6 | ${acl_name_icmpv6} -| | And Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if1} | up -| | And Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if2} | up -| | And Honeycomb sets interface IPv6 address | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} -| | And Honeycomb sets interface IPv6 address | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} -| | And Honeycomb adds interface IPv6 neighbor -| | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac} -| | And VPP RA suppress link layer | ${dut_node} | ${dut_to_tg_if2} -| | And VPP Route Add | ${node} | ${dst_net} | ${prefix_length} -| | ... | gateway=${gateway} | interface=${dut_to_tg_if2} -| | And VPP Route Add | ${node} | ${classify_dst_net} | ${prefix_length} -| | ... | gateway=${gateway} | interface=${dut_to_tg_if2} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_icmpv6} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmpv6} | ingress -| | Then Send ICMP packet with type and code and verify received packet -| | ... | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${icmp_type} | ${icmp_code} -| | Then Send ICMP packet with type and code and verify received packet -| | ... | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${classify_type} | ${icmp_code} -| | And Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet with type and code and verify received packet -| | ... | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${classify_type} | ${classify_code} - -| TC15: ACL reflexive IPv4 filtering through plugin-acl node - routed -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ -| | ... | interfaces to TG, add ARP entries and routes,\ -| | ... | configure a "drop all" ACL on ingress and reflexive ACL on egress. -| | ... | [Ver] Send a simple TCP packet to VPP interface 1 and do not receive\ -| | ... | it back. Then send the packet with reversed src/dst IP address\ -| | ... | to VPP interface 2 and receive it from interface 1(this should create\ -| | ... | a reflexive "permit" rule) Finally, send the original packet again\ -| | ... | and receive it from interface 2. -| | ... -# CSIT-863: running ODL and HC on single node may cause out of memory errors -| | [Tags] | HC_REST_ONLY -| | ... -| | [Teardown] | Routed ACL test teardown - ipv4 -| | ... -| | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test -| | ... | reflex | ${acl_name_reflex} -| | And VPP Add IP Neighbor -| | ... | ${node} | ${dut_to_tg_if1} | ${gateway2} | ${tg_to_dut_if1_mac} -| | And VPP Route Add -| | ... | ${node} | ${src_net} | ${prefix_length} | gateway=${gateway2} -| | ... | interface=${dut_to_tg_if1} -| | And VPP Route Add -| | ... | ${node} | ${classify_src_net} | ${prefix_length} -| | ... | gateway=${gateway2} | interface=${dut_to_tg_if1} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_reflex} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_reflex} | egress -| | And Import Variables | resources/test_data/honeycomb/plugin_acl.py -| | ... | block_all | block_all -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | block_all | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | block_all | ingress -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_dst} | ${classify_src} -| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if2_mac} -| | ... | ${tg_to_dut_if1} | ${dut_to_tg_if2_mac} -| | ... | TCP | ${dst_port} | ${src_port} -| | And Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} - -*** Keywords *** -| Setup interface IPs and routes for IPv4 plugin-acl test -| | [Documentation] | Import test variables, set interfaces up, -| | ... | configure IPv4 addresses, add neighbor entry and routes. -| | ... -| | [Arguments] | ${test_data_id} | ${acl_name} -| | ... -| | Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | Import Variables | resources/test_data/honeycomb/plugin_acl.py -| | ... | ${test_data_id} | ${acl_name} -| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up -| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up -| | Honeycomb sets interface IPv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} -| | Honeycomb sets interface IPv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} -| | And Honeycomb adds interface IPv4 neighbor -| | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac} -| | VPP Route Add -| | ... | ${node} | ${dst_net} | ${prefix_length} | gateway=${gateway} -| | ... | interface=${dut_to_tg_if2} -| | VPP Route Add -| | ... | ${node} | ${classify_dst_net} | ${prefix_length} | gateway=${gateway} -| | ... | interface=${dut_to_tg_if2} - -| Setup interfaces and bridge domain for plugin-acl test -| | [Documentation] | Import test variables, set interfaces up and bridge them. -| | ... -| | [Arguments] | ${test_data_id} | ${acl_name} -| | ... -| | Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | Import Variables | resources/test_data/honeycomb/plugin_acl.py -| | ... | ${test_data_id} | ${acl_name} -| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up -| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up -| | Honeycomb Creates first L2 Bridge Domain -| | ... | ${dut_node} | ${bd_name} | ${bd_settings} -| | Honeycomb Adds Interfaces To Bridge Domain -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} -| | ... | ${bd_name} | ${bd_if_settings} - -| Bridged ACL test teardown -| | [Documentation] | Log packet trace and ACL settings, -| | ... | then clean up bridge domains. -| | ... -| | Show Packet Trace on All DUTs | ${nodes} -| | Read plugin-ACL configuration from VAT | ${node} -| | Clear plugin-ACL configuration | ${node} | ${dut_to_tg_if1} -| | Honeycomb Removes All Bridge Domains -| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} - -| Routed ACL test teardown - ipv4 -| | [Documentation] | Log packet trace and ACL settings, -| | ... | then clean up IPv4 addresses and neighbors. -| | ... -| | Show Packet Trace on All DUTs | ${nodes} -| | Read plugin-ACL configuration from VAT | ${node} -| | Clear plugin-ACL configuration | ${node} | ${dut_to_tg_if1} -| | Honeycomb removes interface IPv4 addresses | ${node} | ${dut_to_tg_if1} -| | Honeycomb clears all interface IPv4 neighbors | ${node} | ${dut_to_tg_if1} - -| Routed ACL test teardown - ipv6 -| | [Documentation] | Log packet trace and ACL settings, -| | ... | then clean up IPv6 addresses and neighbors. -| | ... -| | Show Packet Trace on All DUTs | ${nodes} -| | Clear plugin-ACL configuration | ${node} | ${dut_to_tg_if1} -| | Read plugin-ACL configuration from VAT | ${node} -| | Honeycomb removes interface IPv6 addresses | ${node} | ${dut_to_tg_if1} -| | Honeycomb clears all interface IPv6 neighbors | ${node} | ${dut_to_tg_if1} diff --git a/tests/honeycomb/func/mgmt-cfg-policer-apihc-func.robot b/tests/honeycomb/func/mgmt-cfg-policer-apihc-func.robot deleted file mode 100644 index 1f4d2a9021..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-policer-apihc-func.robot +++ /dev/null @@ -1,142 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables *** -| ${interface}= | ${node['interfaces']['port1']['name']} -| ${tg_to_dut_if1_ip}= | 192.168.122.1 -| ${dut_to_tg_if1_ip}= | 192.168.122.2 -| ${dut_to_tg_if2_ip}= | 192.168.123.1 -| ${tg_to_dut_if2_ip}= | 192.168.123.2 -| ${prefix_length}= | ${24} -| ${dscp_number}= | ${20} - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/policer.robot -| Resource | resources/libraries/robot/honeycomb/access_control_lists.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Library | resources.libraries.python.Trace -| Variables | resources/test_data/honeycomb/policer_variables.py -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Force Tags | HC_FUNC -| ... -| Documentation | *Honeycomb Policer management test suite.* - -*** Test Cases *** -| TC01: Honeycomb can configure Policer -| | [Documentation] | Checks if Honeycomb can configure Policer. -| | ... -| | Given Policer Operational Data From Honeycomb Should Be empty | ${node} -| | When Honeycomb configures Policer | ${node} | ${policer_data} -| | Then Policer Operational Data From Honeycomb Should Be | ${node} -| | ... | ${policer_data_oper} - -| TC02: Honeycomb can disable Policer -| | [Documentation] | Checks if Honeycomb can disable Policer. -| | ... -| | Given Policer Operational Data From Honeycomb Should Be | ${node} -| | ... | ${policer_data_oper} -| | When Honeycomb removes Policer configuration | ${node} -| | Then Policer Operational Data From Honeycomb Should Be empty | ${node} - -| TC03: Honeycomb can configure Policer with increased values of CIR (900kbps) -| | [Documentation] | Checks if Honeycomb can configure Policer\ -| | ... | with increased values of CIR. -| | ... -| | [Teardown] | Tear down policer test | ${node} -| | ... -| | Given Policer Operational Data From Honeycomb Should Be empty | ${node} -| | When Honeycomb configures Policer | ${node} | ${policer_data_2} -| | Then Policer Operational Data From Honeycomb Should Be | ${node} -| | ... | ${policer_data_oper_2} - -| TC04: Honeycomb can configure Packets-Per-Second Based Policer -| | [Documentation] | Checks if Honeycomb can configure Policer\ -| | ... | based on rate-type measured in pps. -| | ... -| | [Teardown] | Tear down policer test | ${node} -| | ... -| | Given Policer Operational Data From Honeycomb Should Be empty | ${node} -| | When Honeycomb configures Policer | ${node} | ${policer_data_3} -| | Then Policer Operational Data From Honeycomb Should Be | ${node} -| | ... | ${policer_data_oper_3} - -| TC05: Configure Policer on Interface -| | [Documentation] | Honeycomb can configure Policer on a given interface. -| | ... -| | [Teardown] | Run Keywords -| | ... | Honeycomb disables Policer on interface | ${node} | ${interface} | AND -| | ... | Honeycomb removes ACL session | ${node} -| | ... | ${acl_tables['hc_acl_table']['name']} -| | ... | ${acl_tables['hc_acl_session']['match']} | AND -| | ... | Honeycomb removes ACL table | ${node} -| | ... | ${acl_tables['hc_acl_table']['name']} | AND -| | ... | Tear down policer test | ${node} -| | ... -| | Given Honeycomb configures Policer | ${node} | ${policer_data} -| | And ACL table from Honeycomb should not exist -| | ... | ${node} | ${acl_tables['hc_acl_table']['name']} -| | When Honeycomb creates ACL table -| | ... | ${node} | ${acl_tables['hc_acl_table']} -| | And Honeycomb adds ACL session -| | ... | ${node} | ${acl_tables['hc_acl_table']['name']} -| | ... | ${acl_tables['hc_acl_session']} -| | Then Honeycomb enables policer on interface -| | ... | ${node} | ${interface} | ${acl_tables['hc_acl_table']['name']} - -| TC06: VPP policer 2R3C Color-aware marks packet -| | [Documentation] -| | ... | [Top] TG=DUT1. -| | ... | [Ref] RFC2474, RFC2698. -| | ... | [Cfg] Configure 2R3C color-aware policer on DUT1 on the first\ -| | ... | interface. -| | ... | [Ver] TG sends IPv4 TCP packet on the first link to DUT1.\ -| | ... | Packet on DUT1 is marked with DSCP tag. Verifies if DUT1 sends\ -| | ... | correct IPv4 TCP packet with correct DSCP on the second link to TG. -| | ... -| | [Teardown] | Show Packet Trace on All DUTs | ${nodes} -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Honeycomb configures Policer | ${dut_node} | ${policer_data_3} -| | And ACL table from Honeycomb should not exist -| | ... | ${dut_node} | ${acl_tables['hc_acl_table']['name']} -| | When Honeycomb creates ACL table -| | ... | ${dut_node} | ${acl_tables['hc_acl_table']} -| | And Honeycomb adds ACL session -| | ... | ${dut_node} | ${acl_tables['hc_acl_table']['name']} -| | ... | ${acl_tables['hc_acl_session']} -| | And Honeycomb enables policer on interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_tables['hc_acl_table']['name']} -| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} -| | ... | up -| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} -| | ... | up -| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} -| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} -| | And Honeycomb adds interface IPv4 neighbor -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${tg_to_dut_if2_ip} -| | ... | ${tg_to_dut_if2_mac} -| | And VPP Node Interfaces Ready Wait | ${dut_node} -| | Then Honeycomb Send packet and verify marking | ${tg_node} -| | ... | ${tg_to_dut_if1} -| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} -| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp_number} diff --git a/tests/honeycomb/func/mgmt-cfg-proxyarp-apihc-func.robot b/tests/honeycomb/func/mgmt-cfg-proxyarp-apihc-func.robot deleted file mode 100644 index 1404633acd..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-proxyarp-apihc-func.robot +++ /dev/null @@ -1,89 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables *** -# Interface to run tests on. -| ${interface}= | ${node['interfaces']['port1']['name']} -| &{proxyarp_settings_ipv4}= | vrf-id=${0} -| ... | low-addr=192.168.1.2 | high-addr=192.168.1.10 -| ${tg_to_dut_ip}= | 10.0.0.100 -| ${dut_to_tg_ip}= | 10.0.0.1 -| ${prefix_length}= | ${24} -| ${test_ip}= | 192.168.1.5 - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/proxyarp.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| Library | resources.libraries.python.Trace -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Force Tags | HC_FUNC -| ... -| Documentation | *Honeycomb proxyARP management test suite.* - -*** Test Cases *** -# TODO: Add operational data and VAT dump verification if/when avaliable -| TC01: Honeycomb can configure ipv4 proxyARP -| | [Documentation] | Check if Honeycomb can configure the proxyARP feature. -| | ... -| | [Teardown] | Honeycomb removes proxyARP configuration | ${node} -| | ... -| | Honeycomb configures proxyARP | ${node} | ${proxyarp_settings_ipv4} - -| TC02: Honeycomb can enable proxyarp on an interface -| | [Documentation] | Check if Honeycomb can enable the proxyARP feature\ -| | ... | on an interface. -| | ... -| | [Teardown] | Honeycomb disables proxyARP on interface -| | ... | ${node} | ${interface} -| | ... -| | Honeycomb enables proxyARP on interface | ${node} | ${interface} - -| TC03: DUT sends ARP reply on behalf of another machine from the IP range -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC1027. -| | ... | [Cfg] On DUT1 configure interface IPv4 address and proxy ARP -| | ... | for IP range, using Honeycomb API. -| | ... | [Ver] Make TG send ARP request to DUT1 interface, -| | ... | verify if DUT1 sends correct ARP reply on behalf of machine whose -| | ... | IP is in the configured range. -| | ... -| | [Teardown] | Run Keywords -| | ... | Show Packet Trace on all DUTs | ${nodes} -| | ... | AND | Honeycomb removes proxyARP configuration | ${node} -| | ... | AND | Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if1} | down -| | ... | AND | Honeycomb removes interface IPv4 addresses -| | ... | ${node} | ${interface} -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | ${dut_to_tg_name}= | Get interface name | ${dut_node} | ${dut_to_tg_if1} -| | ${tg_to_dut_name}= | Get interface name | ${tg_node} | ${tg_to_dut_if1} -| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up -| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_ip} | ${prefix_length} -| | When Honeycomb configures proxyARP | ${dut_node} | ${proxyarp_settings_ipv4} -| | And Honeycomb enables proxyARP on interface | ${node} | ${dut_to_tg_name} -| | Then Send ARP Request | ${tg_node} | ${tg_to_dut_name} -| | ... | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} -| | ... | ${tg_to_dut_ip} | ${test_ip} diff --git a/tests/honeycomb/func/mgmt-cfg-proxynd6-apihc-func.robot b/tests/honeycomb/func/mgmt-cfg-proxynd6-apihc-func.robot deleted file mode 100644 index 4425750add..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-proxynd6-apihc-func.robot +++ /dev/null @@ -1,117 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables *** -# Interface to run configuration tests on. -| ${interface}= | ${node['interfaces']['port1']['name']} -# IPv6 addresses to configure on DUT. -| ${dut_to_tg_if1_ip}= | 10::1 -| ${dut_to_tg_if2_ip}= | 11::1 -# IPv6 addresses used for TG interfaces. -| ${test_src_ip}= | 10::2 -| ${test_dst_ip}= | 11::2 -| ${test_dst_ip2}= | 11::3 -# IPv6 subnet prefix length -| ${prefix_length}= | 64 - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/proxyarp.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/ip/ip6.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| Resource | resources/libraries/robot/features/dhcp_proxy.robot -| Library | resources.libraries.python.Trace -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Force Tags | HC_FUNC -| ... -| Documentation | *Honeycomb IPv6 neighbor discovery proxy test suite.* - -*** Test Cases *** -| TC01: Honeycomb can configure IPv6 ND proxy on an interface -| | [Documentation] | Check if Honeycomb can configure the IPv6 ND proxy\ -| | ... | feature on an interface. -| | ... -| | Given IPv6 ND proxy from Honeycomb should be empty | ${node} | ${interface} -| | And Honeycomb configures interface state | ${node} | ${interface} | up -| | When Honeycomb configures IPv6 ND proxy on interface -| | ... | ${node} | ${interface} | ${test_dst_ip} -| | Then IPv6 ND proxy from Honeycomb should be -| | ... | ${node} | ${interface} | ${test_dst_ip} - -| TC02: Honeycomb can disable IPv6 ND proxy on an interface -| | [Documentation] | Check if Honeycomb can remove IPv6 ND proxy feature\ -| | ... | configuration from an interface. -| | ... -| | Given IPv6 ND proxy from Honeycomb should be -| | ... | ${node} | ${interface} | ${test_dst_ip} -| | When Honeycomb disables IPv6 ND proxy on interface | ${node} | ${interface} -| | Then IPv6 ND proxy from Honeycomb should be empty | ${node} | ${interface} - -| TC03: Honeycomb can configure multiple IPv6 ND proxies on an interface -| | [Documentation] | Check if Honeycomb can configure two ND proxies\ -| | ... | on one interface. -| | ... -| | [Teardown] | Honeycomb disables IPv6 ND proxy on interface -| | ... | ${node} | ${interface} -| | ... -| | Given IPv6 ND proxy from Honeycomb should be empty | ${node} | ${interface} -| | And Honeycomb configures interface state | ${node} | ${interface} | up -| | When Honeycomb configures IPv6 ND proxy on interface -| | ... | ${node} | ${interface} | ${test_dst_ip} | ${test_dst_ip2} -| | Then IPv6 ND proxy from Honeycomb should be -| | ... | ${node} | ${interface} | ${test_dst_ip} | ${test_dst_ip2} - -| TC04: VPP proxies valid ICMPv6 Neighbor Discovery request -| | [Documentation] | -| | ... | [Top] TG=DUT -| | ... | [Cfg] On DUT configure IPv6 addresses and neighbors, supress router\ -| | ... | advertisement and configure IPv6 Neighbor Discovery proxy. -| | ... | [Ver] Make TG send a neighbor solicitation packet to it's other\ -| | ... | interface through DUT, verify DUT responds to the packet instead\ -| | ... | of forwarding it. Then exchange ICMPv6 Echo request/reply to verify\ -| | ... | connectivity between interfaces. -| | ... | [Ref] RFC 4389 -| | ... -| | [Teardown] | Run Keywords -| | ... | Show Packet Trace on All DUTs | ${nodes} | AND -| | ... | Honeycomb disables IPv6 ND proxy on interface -| | ... | ${dut_node} | ${dut_to_tg_if2} -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up -| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up -| | Honeycomb sets interface IPv6 address | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} -| | Honeycomb sets interface IPv6 address | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} -| | And Vpp Ra Suppress Link Layer | ${dut_node} | ${dut_to_tg_if1} -| | And Vpp Ra Suppress Link Layer | ${dut_node} | ${dut_to_tg_if2} -| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${test_src_ip} | ${tg_to_dut_if1_mac} -| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${test_dst_ip} | ${tg_to_dut_if2_mac} -| | When Honeycomb configures IPv6 ND proxy on interface -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${test_dst_ip} -| | Then Verify IPv6ND proxy | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2} -| | ... | ${test_src_ip} | ${test_dst_ip} -| | ... | ${tg_to_dut_if1_mac} | ${tg_to_dut_if2_mac} -| | ... | ${dut_to_tg_if1_mac} | ${dut_to_tg_if2_mac} diff --git a/tests/honeycomb/func/mgmt-cfg-routing-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-routing-apihc-apivat-func.robot deleted file mode 100644 index b690c04e9e..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-routing-apihc-apivat-func.robot +++ /dev/null @@ -1,251 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.honeycomb.Routing.RoutingKeywords -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.InterfaceUtil -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/ip/ip6.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/routing.robot -| Resource | resources/libraries/robot/honeycomb/fib.robot -| ... -| Test Setup | Clear Packet Trace on All DUTs | ${nodes} -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Test Teardown | Honeycomb routing test teardown | ${node} | ${table} -| ... -| Documentation | *Honeycomb routing test suite.* -| ... -| Force Tags | HC_FUNC - -*** Test Cases *** -| TC01: Single hop IPv4 route -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-ICMP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 add ARP entries to both TG\ -| | ... | interfaces and configure route with TG-if2 as next-hop. -| | ... | [Ver] Send ICMP packet from first TG interface to configured route -| | ... | destination. Receive packet on the second TG interface. -| | ... -| | ${table}= | Set Variable | table1 -| | Given Setup interfaces and neighbors for IPv4 routing test -| | When Honeycomb configures routing table -| | ... | ${node} | table1 | ipv4 | ${table1} | ${1} -| | Then Routing data from Honeycomb should contain -| | ... | ${node} | table1 | ipv4 | ${table1_oper} -| | And Verify route IPv4 | ${nodes['TG']} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} - -| TC02: Multi hop IPv4 route -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-ICMP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 add ARP entries to both TG\ -| | ... | interfaces and configure two routes through the second DUT interface. -| | ... | [Ver] Send 100 ICMP packets from first TG interface to configured -| | ... | route destination. Receive all packets on the second TG interface and\ -| | ... | verify that each destination MAC was used by exactly 50 packets. -| | ... | Receive packet on the second TG interface. -| | ... -| | ${table}= | Set Variable | table2 -| | Given Setup interfaces and neighbors for IPv4 routing test -| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${next_hop1} | ${next_hop_mac1} -| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${next_hop2} | ${next_hop_mac2} -| | ... -| | When Honeycomb configures routing table -| | ... | ${node} | table2 | ipv4 | ${table2} | ${1} -| | Then Routing data from Honeycomb should contain -| | ... | ${node} | table2 | ipv4 | ${table2_oper} -| | And Verify multipath Route | ${nodes['TG']} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${dut_to_tg_if2_mac} | ${next_hop_mac1} | ${next_hop_mac2} - -| TC03: Special hop - blackhole IPv4 route -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-ICMP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 add ARP entries to both TG\ -| | ... | interfaces and configure route with special rule blackhole. -| | ... | [Ver] Send ICMP packet from first TG interface to configured route -| | ... | destination. Make sure no packet is received on the second TG\ -| | ... | interface. -| | ... -| | ${table}= | Set Variable | table3 -| | Given Setup interfaces and neighbors for IPv4 routing test -| | When Honeycomb configures routing table -| | ... | ${node} | table3 | ipv4 | ${table3} | ${1} | special=${TRUE} -| | Then Routing data from Honeycomb should contain -| | ... | ${node} | table3 | ipv4 | ${table3_oper} -| | And Run keyword and Expect Error | ICMP echo Rx timeout -| | ... | Verify route IPv4 | ${nodes['TG']} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} - -| TC04: Single hop IPv6 route -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv6-ICMPv6. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 add ARP entries to both TG\ -| | ... | interfaces and configure route with TG-if2 as next-hop. -| | ... | [Ver] Send ICMP packet from first TG interface to configured route -| | ... | destination. Receive packet on the second TG interface. -| | ... -| | ${table}= | Set Variable | table4 -| | Given Setup interfaces and neighbors for IPv6 routing test -| | When Honeycomb configures routing table -| | ... | ${node} | table4 | ipv6 | ${table4} | ${1} -| | Then Routing data from Honeycomb should contain -| | ... | ${node} | table4 | ipv6 | ${table4_oper} -| | And Verify route IPv6 | ${nodes['TG']} -| | ... | ${src_ip} | ${next_hop} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} - -| TC05: Multi hop IPv6 route -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv6-ICMPv6. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 add ARP entries to both TG\ -| | ... | interfaces and configure two routes through the second DUT interface. -| | ... | [Ver] Send 100 ICMP packets from first TG interface to configured -| | ... | route destination. Receive all packets on the second TG interface and\ -| | ... | verify that each destination MAC was used by exactly 50 packets. -| | ... | Receive packet on the second TG interface. -| | ... -| | ${table}= | Set Variable | table5 -| | Given Setup interfaces and neighbors for IPv6 routing test -| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${next_hop1} | ${next_hop_mac1} -| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${next_hop2} | ${next_hop_mac2} -| | When Honeycomb configures routing table -| | ... | ${node} | table5 | ipv6 | ${table5} | ${1} -| | Then Routing data from Honeycomb should contain -| | ... | ${node} | table5 | ipv6 | ${table5_oper} -| | And Verify multipath Route | ${nodes['TG']} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${dut_to_tg_if2_mac} | ${next_hop_mac1} | ${next_hop_mac2} - -| TC06: Special hop - blackhole IPv6 route -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv6-ICMPv6. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 add ARP entries to both TG\ -| | ... | interfaces and configure route with special rule blackhole. -| | ... | [Ver] Send ICMP packet from first TG interface to configured route -| | ... | destination. Make sure no packet is received on the second TG\ -| | ... | interface. -| | ... -| | ${table}= | Set Variable | table6 -| | Given Setup interfaces and neighbors for IPv6 routing test -| | When Honeycomb configures routing table -| | ... | ${node} | table6 | ipv6 | ${table6} | ${1} | special=${TRUE} -| | Then Routing data from Honeycomb should contain -| | ... | ${node} | table6 | ipv6 | ${table6_oper} -| | And Run keyword and Expect Error | ICMP echo Rx timeout -| | ... | Verify route IPv6 | ${nodes['TG']} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} - -*** Keywords *** -| Setup interfaces and neighbors for IPv4 routing test -| | Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | Import Variables | resources/test_data/honeycomb/routing.py -| | ... | ${nodes['DUT1']} | ipv4 | ${dut_to_tg_if2} -| | Setup vrf FIBs | ${dut_node} | ${1} -| | Setup vrf IDs | ${dut_node} | ${dut_to_tg_if1} | ${1} -| | Setup vrf IDs | ${dut_node} | ${dut_to_tg_if2} | ${1} -| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up -| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up -| | Vpp Node Interfaces Ready Wait | ${dut_node} -| | Honeycomb sets interface IPv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_len} -| | Honeycomb sets interface IPv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_len} -| | Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${src_ip} | ${tg_to_dut_if1_mac} -| | Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${next_hop} | ${tg_to_dut_if2_mac} - -| Setup interfaces and neighbors for IPv6 routing test -| | Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | Import Variables | resources/test_data/honeycomb/routing.py -| | ... | ${nodes['DUT1']} | ipv6 | ${dut_to_tg_if2} -| | Setup vrf FIBs | ${dut_node} | ${1} -| | Setup vrf IDs | ${dut_node} | ${dut_to_tg_if1} | ${1} -| | Setup vrf IDs | ${dut_node} | ${dut_to_tg_if2} | ${1} -| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up -| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up -| | Vpp Node Interfaces Ready Wait | ${dut_node} -| | Honeycomb sets interface IPv6 address | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_len} -| | Honeycomb sets interface IPv6 address | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_len} -| | Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${src_ip} | ${tg_to_dut_if1_mac} -| | Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${next_hop} | ${tg_to_dut_if2_mac} -| | Vpp all ra suppress link layer | ${nodes} - -| Honeycomb routing test teardown -| | ... -| | [arguments] | ${node} | ${routing_table} -| | ... -| | Show Packet Trace on All DUTs | ${nodes} -| | Log routing configuration from VAT | ${node} -| | Honeycomb removes routing configuration | ${node} | ${routing_table} -| | Remove vrf FIBs | ${node} | ${1} - -| Setup vrf IDs -| | ... -| | [Arguments] | ${node} | ${interface} | ${vrf} -| | ... -| | Honeycomb sets interface VRF ID -| | ... | ${node} | ${interface} | ${vrf} | ipv4 -| | Honeycomb sets interface VRF ID -| | ... | ${node} | ${interface} | ${vrf} | ipv6 - -| Setup vrf FIBs -| | ... -| | [Arguments] | ${node} | ${vrf} -| | ... -| | Honeycomb configures FIB table | ${node} | ipv4 | ${vrf} -| | Honeycomb configures FIB table | ${node} | ipv6 | ${vrf} - -| Remove vrf FIBs -| | ... -| | [Arguments] | ${node} | ${vrf} -| | ... -| | Honeycomb removes FIB configuration | ${node} | ipv4 | ${vrf} -| | Honeycomb removes FIB configuration | ${node} | ipv6 | ${vrf} diff --git a/tests/honeycomb/func/mgmt-cfg-slaac-apihc-func.robot b/tests/honeycomb/func/mgmt-cfg-slaac-apihc-func.robot deleted file mode 100644 index 8a54918032..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-slaac-apihc-func.robot +++ /dev/null @@ -1,136 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables *** -# Interface to run tests on. -| ${interface}= | ${node['interfaces']['port1']['name']} - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/slaac.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Force Tags | HC_FUNC -| ... -| Documentation | *Honeycomb SLAAC management test suite.* -| ... -| Variables | resources/test_data/honeycomb/slaac_variables.py - -*** Test Cases *** -| TC01: Honeycomb can configure SLAAC -| | [Documentation] | Checks if Honeycomb can configure SLAAC. -| | ... -| | Given SLAAC Operational Data From Honeycomb Should Be empty | ${node} -| | ... | ${interface} -| | And Honeycomb Configures Interface State | ${node} | ${interface} | up -| | And Honeycomb sets interface IPv6 address | ${node} | ${interface} -| | ... | ${address} | ${prefix} -| | When Honeycomb configures SLAAC | ${node} | ${interface} | ${slaac_data} -| | Then SLAAC Operational Data From Honeycomb Should Be | ${node} -| | ... | ${interface} | ${slaac_data} - -| TC02: Honeycomb can disable SLAAC -| | [Documentation] | Checks if Honeycomb can disable SLAAC. -| | ... -| | Given SLAAC Operational Data From Honeycomb Should Be | ${node} -| | ... | ${interface} | ${slaac_data} -| | When Honeycomb removes SLAAC configuration | ${node} | ${interface} -| | Then SLAAC Operational Data From Honeycomb Should Be empty | ${node} -| | ... | ${interface} - -| TC03: Honeycomb can configure SLAAC with suppress link layer disabled -| | [Documentation] | Checks if Honeycomb can configure SLAAC. -| | ... -| | [Teardown] | SLAAC test teardown | ${node} | ${interface} -| | ... -| | Given SLAAC Operational Data From Honeycomb Should Be empty | ${node} -| | ... | ${interface} -| | And Honeycomb Configures Interface State | ${node} | ${interface} | up -| | And Honeycomb sets interface IPv6 address | ${node} | ${interface} -| | ... | ${address} | ${prefix} -| | When Honeycomb configures SLAAC | ${node} | ${interface} | ${slaac_data} -| | Then SLAAC Operational Data From Honeycomb Should Be | ${node} -| | ... | ${interface} | ${slaac_data} - -| TC04: Honeycomb can configure SLAAC with sending RA packets disabled -| | [Documentation] | Checks if Honeycomb can configure SLAAC\ -| | ... | with given settings. -| | ... -| | [Teardown] | SLAAC test teardown | ${node} | ${interface} -| | ... -| | Given SLAAC Operational Data From Honeycomb Should Be empty | ${node} -| | ... | ${interface} -| | And Honeycomb Configures Interface State | ${node} | ${interface} | up -| | And Honeycomb sets interface IPv6 address | ${node} | ${interface} -| | ... | ${address} | ${prefix} -| | When Honeycomb configures SLAAC | ${node} | ${interface} | ${slaac_data_01} -| | Then SLAAC Operational Data From Honeycomb Should Be | ${node} -| | ... | ${interface} | ${slaac_data_01} - -| TC05: Honeycomb can configure SLAAC with min interval values -| | [Documentation] | Checks if Honeycomb can configure SLAAC\ -| | ... | with given settings. -| | ... -| | [Teardown] | SLAAC test teardown | ${node} | ${interface} -| | ... -| | Given SLAAC Operational Data From Honeycomb Should Be empty | ${node} -| | ... | ${interface} -| | And Honeycomb Configures Interface State | ${node} | ${interface} | up -| | And Honeycomb sets interface IPv6 address | ${node} | ${interface} -| | ... | ${address} | ${prefix} -| | When Honeycomb configures SLAAC | ${node} | ${interface} | ${slaac_data_02} -| | Then SLAAC Operational Data From Honeycomb Should Be | ${node} -| | ... | ${interface} | ${slaac_data_02} - -| TC06: Honeycomb can configure SLAAC with max interval values -| | [Documentation] | Checks if Honeycomb can configure SLAAC\ -| | ... | with given settings. -| | ... -| | [Teardown] | SLAAC test teardown | ${node} | ${interface} -| | ... -| | Given SLAAC Operational Data From Honeycomb Should Be empty | ${node} -| | ... | ${interface} -| | And Honeycomb Configures Interface State | ${node} | ${interface} | up -| | And Honeycomb sets interface IPv6 address | ${node} | ${interface} -| | ... | ${address} | ${prefix} -| | When Honeycomb configures SLAAC | ${node} | ${interface} | ${slaac_data_03} -| | Then SLAAC Operational Data From Honeycomb Should Be | ${node} -| | ... | ${interface} | ${slaac_data_03} - -| TC07: DUT retransmits RA on IPv6 enabled interface after a set interval -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG. -| | ... | [Ver] Make TG wait for two IPv6 Router Advertisement packets\ -| | ... | to be sent by DUT1 and verify the received RA packets are correct. -| | ... -| | [Teardown] | SLAAC test teardown | ${dut_node} | ${dut_to_tg_if1} -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Honeycomb sets interface IPv6 address -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${address} | ${prefix} -| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} -| | ... | up -| | When Honeycomb configures SLAAC | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${slaac_data} -| | :FOR | ${n} | IN RANGE | ${2} -| | | Then Receive and verify router advertisement packet -| | | ... | ${tg_node} | ${tg_to_dut_if1} | ${dut_to_tg_if1_mac} | ${20} diff --git a/tests/honeycomb/func/mgmt-cfg-snat44-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-snat44-apihc-apivat-func.robot deleted file mode 100644 index 2ce02c6aa1..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-snat44-apihc-apivat-func.robot +++ /dev/null @@ -1,105 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables*** -| ${interface}= | ${node['interfaces']['port1']['name']} - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/nat.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Variables | resources/test_data/honeycomb/nat.py | ${node} | ${interface} -| ... -| Documentation | *Honeycomb NAT test suite.* -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Force Tags | HC_FUNC - -*** Test Cases *** -| TC01: Honeycomb configures NAT entry -| | [Documentation] | Honeycomb configures a static NAT entry. -| | ... -| | Given NAT Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${nat_empty} -| | When Honeycomb Configures NAT Entry | ${node} | ${entry1} -| | Then NAT Entries From Honeycomb Should Be | ${node} | ${entry1} - -| TC02: Honeycomb removes NAT entry -| | [Documentation] | Honeycomb removes a configured static NAT entry. -| | ... -| | Given NAT Entries From Honeycomb Should Be | ${node} | ${entry1} -| | When Honeycomb Configures NAT Entry | ${node} | ${NONE} -| | Then NAT Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${nat_empty} - -| TC03: Honeycomb configures multiple NAT entries -| | [Documentation] | Honeycomb configures two static NAT entries. -| | ... -| | [Teardown] | Honeycomb Configures NAT Entry | ${node} | ${NONE} -| | ... -| | Given NAT Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${nat_empty} -| | When Honeycomb Configures NAT Entry | ${node} | ${entry1} | ${0} | ${1} -| | And Honeycomb Configures NAT Entry | ${node} | ${entry2} | ${0} | ${2} -| | Then NAT Entries From Honeycomb Should Be -| | ... | ${node} | ${entry1_2_oper} | ${0} - -| TC04: Honeycomb enables NAT on interface - inbound -| | [Documentation] | Honeycomb configures NAT on an interface\ -| | ... | in inbound direction. -| | ... -| | Given NAT Interface Operational Data From Honeycomb Should Be Empty -| | ... | ${node} | ${interface} | inbound -| | And NAT Interface Operational Data From Honeycomb Should Be Empty -| | ... | ${node} | ${interface} | outbound -| | When Honeycomb Configures NAT On Interface -| | ... | ${node} | ${interface} | inbound -| | Then NAT Interface Operational Data From Honeycomb Should Be -| | ... | ${node} | ${interface} | inbound -| | And NAT Interface Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${interface} | outbound - -| TC05: Honeycomb removes NAT interface configuration -| | [Documentation] | Honeycomb removes NAT configuration from an interface. -| | ... -| | Given NAT Interface Operational Data From Honeycomb Should Be -| | ... | ${node} | ${interface} | inbound -| | And NAT Interface Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${interface} | outbound -| | When Honeycomb removes NAT interface configuration -| | ... | ${node} | ${interface} | inbound -| | Then NAT Interface Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${interface} | inbound -| | And NAT Interface Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${interface} | outbound - -| TC06: Honeycomb enables NAT on interface - outbound -| | [Documentation] | Honeycomb configures NAT on an interface\ -| | ... | in outbound direction. -| | ... -| | [Teardown] | Honeycomb removes NAT interface configuration -| | ... | ${node} | ${interface} | outbound -| | ... -| | Given NAT Interface Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${interface} | inbound -| | And NAT Interface Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${interface} | outbound -| | When Honeycomb Configures NAT on Interface -| | ... | ${node} | ${interface} | outbound -| | Then NAT Interface Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${interface} | inbound -| | And NAT Interface Operational Data From Honeycomb Should Be -| | ... | ${node} | ${interface} | outbound diff --git a/tests/honeycomb/func/mgmt-cfg-spanrx-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-spanrx-apihc-apivat-func.robot deleted file mode 100644 index ccb674fbd7..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-spanrx-apihc-apivat-func.robot +++ /dev/null @@ -1,256 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/port_mirroring.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/sub_interface.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/telemetry/span.robot -| Variables | resources/test_data/honeycomb/span.py -| ... | ${node['interfaces']['port1']['name']} -| ... | ${node['interfaces']['port3']['name']} -| ... | local0 -| Variables | resources/test_data/honeycomb/sub_interfaces.py -| ... -| Force Tags | HC_FUNC -| ... -| Suite Setup | Run Keywords -| ... | Set Up Honeycomb Functional Test Suite | ${node} | AND -| ... | Add Interface local0 To Topology | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Documentation | *Honeycomb port mirroring test suite.* - -*** Test Cases *** -| TC01: Honeycomb can configure SPAN on an interface - receive -| | [Documentation] | Honeycomb configures SPAN on interface and verifies -| | ... | against VPP SPAN dump in state receive. -| | ... -| | When Honeycomb configures SPAN on interface -| | ... | ${node} | ${interface1} | ${settings_receive} -| | Then Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface1} | ${settings_receive} - -| TC02: Honeycomb can configure SPAN on an interface - transmit -| | [Documentation] | Honeycomb configures SPAN on interface and verifies -| | ... | against VPP SPAN dump in state transmit. -| | ... -| | When Honeycomb configures SPAN on interface -| | ... | ${node} | ${interface1} | ${settings_transmit} -| | Then Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface1} | ${settings_transmit} - -| TC03: Honeycomb can configure SPAN on an interface - both -| | [Documentation] | Honeycomb configures SPAN on interface and verifies -| | ... | against VPP SPAN dump in state both. -| | ... -| | When Honeycomb configures SPAN on interface -| | ... | ${node} | ${interface1} | ${settings_both} -| | Then Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface1} | ${settings_both} - -| TC04: Honeycomb can configure SPAN on an interface with two source interfaces -| | [Documentation] | Honeycomb configures SPAN on interface and verifies -| | ... | against VPP SPAN dump in state both. -| | ... -| | When Honeycomb configures SPAN on interface -| | ... | ${node} | ${interface1} | ${settings_both} | ${settings_if2} -| | Then Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface1} | ${settings_both} | ${settings_if2} - -| TC05: Honeycomb can disable SPAN on interface -| | [Documentation] | Honeycomb removes existing SPAN configuration -| | ... | from interface. -| | ... -| | Given Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface1} | ${settings_both} | ${settings_if2} -| | When Honeycomb removes interface SPAN configuration -| | ... | ${node} | ${interface1} -| | Then Interface SPAN Operational Data from Honeycomb should be empty -| | ... | ${node} | ${interface1} - -| TC06: Honeycomb can configure SPAN with two destination interfaces from the same source -| | [Documentation] | Honeycomb configures SPAN on two interfaces and verifies -| | ... | against VPP SPAN dump. -| | ... -| | [Teardown] | Run Keywords -| | ... | Honeycomb removes interface SPAN configuration -| | ... | ${node} | ${interface1} | AND -| | ... | Honeycomb removes interface SPAN configuration -| | ... | ${node} | ${interface2} -| | ... -| | When Honeycomb configures SPAN on interface -| | ... | ${node} | ${interface1} | ${settings_if2} -| | And Honeycomb configures SPAN on interface -| | ... | ${node} | ${interface2} | ${settings_if2} -| | Then Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface1} | ${settings_if2} -| | Then Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface2} | ${settings_if2} - -| TC07: DUT mirrors IPv4 packets from one interface to another -| | [Documentation] -| | ... | [Top] TG=DUT1 -| | ... | [Cfg] (using Honeycomb) On DUT1 configure IPv4 address and set SPAN\ -| | ... | mirroring from one DUT interface to the other. -| | ... | [Ver] Make TG send an ARP packet to DUT through one interface,\ -| | ... | then receive a copy of sent packet and of DUT's ARP reply\ -| | ... | on the second interface. -| | ... -| | [Teardown] | Run Keywords -| | ... | Show Packet Trace on All DUTs | ${nodes} | AND -| | ... | Honeycomb clears all interface IPv4 neighbors -| | ... | ${dut_node} | ${dut_to_tg_if1} | AND -| | ... | Honeycomb removes interface IPv4 addresses -| | ... | ${dut_node} | ${dut_to_tg_if1} | AND -| | ... | Honeycomb removes interface SPAN configuration -| | ... | ${node} | ${dut_to_tg_if2} -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} -| | ... | up -| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} -| | ... | up -| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix} -| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if1_mac} -| | ${settings_5}= | create dictionary | state=both -| | ... | iface-ref=${dut_to_tg_if1} -| | And All Vpp Interfaces Ready Wait | ${nodes} -| | When Honeycomb configures SPAN on interface -| | ... | ${node} | ${dut_to_tg_if2} | ${settings_5} -| | Then Send Packet And Check Received Copies | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${dut_to_tg_if1_mac} | ${tg_to_dut_if2} -| | ... | ${tg_to_dut_if1_ip} | ${dut_to_tg_if1_ip} | ICMP - -| TC08: Honeycomb can configure SPAN on a sub-interface - receive -| | [Documentation] | Honeycomb configures SPAN on sub-interface and verifies -| | ... | against VPP SPAN dump in state receive. -| | ... -| | Given Honeycomb creates sub-interface | ${node} | ${interface1} -| | ... | ${sub_if_1_match} | ${sub_if_1_tags} | ${sub_if_1_settings} -| | When Honeycomb Configures SPAN on sub-interface -| | ... | ${node} | ${interface1} | ${1} | ${settings_receive} -| | Then sub-Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface1} | ${1} | ${settings_receive} - -| TC09: Honeycomb can configure SPAN on a sub-interface - transmit -| | [Documentation] | Honeycomb configures SPAN on sub-interface and verifies -| | ... | against VPP SPAN dump in state transmit. -| | ... -| | Given Sub-interface state from Honeycomb should be -| | ... | ${node} | ${interface1} | ${1} | down | up -| | When Honeycomb Configures SPAN on sub-interface -| | ... | ${node} | ${interface1} | ${1} | ${settings_transmit} -| | Then sub-Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface1} | ${1} | ${settings_transmit} - -| TC10: Honeycomb can configure SPAN on a sub-interface - both -| | [Documentation] | Honeycomb configures SPAN on sub-interface and verifies -| | ... | against VPP SPAN dump in state both. -| | ... -| | Given Sub-interface state from Honeycomb should be -| | ... | ${node} | ${interface1} | ${1} | down | up -| | When Honeycomb Configures SPAN on sub-interface -| | ... | ${node} | ${interface1} | ${1} | ${settings_both} -| | Then sub-Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface1} | ${1} | ${settings_both} - -| TC11: Honeycomb can configure SPAN on a sub-interface with two source interfaces -| | [Documentation] | Honeycomb configures SPAN on sub-interface and verifies -| | ... | against VPP SPAN dump in state both. -| | ... -| | Given Sub-interface state from Honeycomb should be -| | ... | ${node} | ${interface1} | ${1} | down | up -| | When Honeycomb Configures SPAN on sub-interface -| | ... | ${node} | ${interface1} | ${1} | ${settings_both} | ${settings_if2} -| | Then sub-Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface1} | ${1} | ${settings_both} | ${settings_if2} - -| TC12: Honeycomb can disable SPAN on interface -| | [Documentation] | Honeycomb removes existing SPAN configuration -| | ... | from sub-interface. -| | ... -| | Given Sub-interface state from Honeycomb should be -| | ... | ${node} | ${interface1} | ${1} | down | up -| | Given sub-Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface1} | ${1} | ${settings_both} | ${settings_if2} -| | When Honeycomb removes sub-interface SPAN configuration -| | ... | ${node} | ${interface1} | ${1} -| | Then sub-Interface SPAN Operational Data from Honeycomb should be empty -| | ... | ${node} | ${interface1} | ${1} - -| TC13: Honeycomb can configure SPAN with two destination sub-interfaces from the same source -| | [Documentation] | Honeycomb configures SPAN on two sub-interfaces -| | ... | and verifies against VPP SPAN dump. -| | ... -| | [Teardown] | Run Keywords -| | ... | Honeycomb removes sub-interface SPAN configuration -| | ... | ${node} | ${interface1} | ${1} | AND -| | ... | Honeycomb removes sub-interface SPAN configuration -| | ... | ${node} | ${interface2} | ${1} -| | ... -| | Given Honeycomb creates sub-interface | ${node} | ${interface2} -| | ... | ${sub_if_2_match} | ${sub_if_2_tags} | ${sub_if_2_settings} -| | When Honeycomb Configures SPAN on sub-interface -| | ... | ${node} | ${interface1} | ${1} | ${settings_if2} -| | And Honeycomb Configures SPAN on sub-interface -| | ... | ${node} | ${interface2} | ${1} | ${settings_if2} -| | Then Sub-Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface1} | ${1} | ${settings_if2} -| | Then Sub-Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface2} | ${1} | ${settings_if2} - -| TC14: DUT mirrors IPv4 packets from an interface to a sub-interface -| | [Documentation] -| | ... | [Top] TG=DUT1 -| | ... | [Cfg] (using Honeycomb) On DUT1 configure IPv4 address and set SPAN\ -| | ... | mirroring from one DUT interface to a sub-interface on the other\ -| | ... | interface. -| | ... | [Ver] Make TG send an ARP packet to DUT through one interface,\ -| | ... | then receive a copy of sent packet and of DUT's ARP reply\ -| | ... | on the sub-interface. -| | ... -| | [Teardown] | Show Packet Trace on All DUTs | ${nodes} -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Honeycomb creates sub-interface | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${sub_if_1_match} | ${sub_if_1_tags} | ${sub_if_1_settings} -| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} -| | ... | up -| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} -| | ... | up -| | And Honeycomb sets the sub-interface up -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${1} -| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix} -| | And And Honeycomb adds interface IPv4 neighbor -| | ... | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${tg_to_dut_if2_ip} | ${tg_to_dut_if2_mac} -| | ${settings_5}= | create dictionary | state=both -| | ... | iface-ref=${dut_to_tg_if2} -| | And All Vpp Interfaces Ready Wait | ${nodes} -| | When Honeycomb Configures SPAN on sub-interface -| | ... | ${node} | ${dut_to_tg_if1} | ${1} | ${settings_5} -| | Then Send Packet And Check Received Copies | ${tg_node} -| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if2_mac} -| | ... | ${dut_to_tg_if2_mac} | ${tg_to_dut_if1} -| | ... | ${tg_to_dut_if2_ip} | ${dut_to_tg_if2_ip} | ICMP diff --git a/tests/honeycomb/func/mgmt-cfg-vxlan-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-vxlan-apihc-apivat-func.robot deleted file mode 100644 index 76615264c5..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-vxlan-apihc-apivat-func.robot +++ /dev/null @@ -1,137 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables *** -# Interfaces to run tests on. -| ${interface}= | ${node['interfaces']['port1']['name']} -| ${vx_interface}= | vx_tunnel_test -# Configuration which will be set and verified during tests. -| &{vxlan_settings}= | src=192.168.0.2 | dst=192.168.0.3 | vni=${88} -| ... | encap-vrf-id=${0} -| &{vxlan_settings2}= | src=192.168.0.4 | dst=192.168.0.5 | vni=${47} -| ... | encap-vrf-id=${0} -| &{vxlan_settings_ipv6}= | src=10::10 | dst=10::11 | vni=${88} -| ... | encap-vrf-id=${0} - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/vxlan.robot -# import additional VxLAN settings from resource file -| Variables | resources/test_data/honeycomb/vxlan.py -| ... -| Force Tags | HC_FUNC -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Documentation | *Honeycomb VxLAN management test suite.* - -*** Test Cases *** -| TC01: Honeycomb configures VxLAN tunnel -| | [Documentation] | Check if Honeycomb API can configure VxLAN settings. -| | ... -| | Given VxLAN Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${vx_interface} -| | And VxLAN Operational Data From VAT Should Be empty | ${node} -| | When Honeycomb sets interface VxLAN configuration -| | ... | ${node} | ${vx_interface} | ${vxlan_settings} -| | Then VxLAN Operational Data From Honeycomb Should Be -| | ... | ${node} | ${vx_interface} | ${vxlan_settings} -| | And VxLAN Operational Data From VAT Should Be -| | ... | ${node} | ${vxlan_settings} -| | ${vxlan_index}= | Get interface index from oper data -| | ... | ${node} | ${vx_interface} -| | Set Suite Variable | ${vxlan_index} - -| TC02: Honeycomb disables VxLAN tunnel -| | [Documentation] | Check if Honeycomb API can reset VxLAN configuration. -| | ... -| | Given VxLAN Operational Data From Honeycomb Should Be -| | ... | ${node} | ${vx_interface} | ${vxlan_settings} -| | And Honeycomb should not show disabled interface in oper data -| | ... | ${node} | ${vxlan_index} -| | And VxLAN Operational Data From VAT Should Be -| | ... | ${node} | ${vxlan_settings} -| | When Honeycomb removes VxLAN tunnel settings | ${node} | ${vx_interface} -| | Then VxLAN Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${vx_interface} -| | And Honeycomb should show disabled interface in oper data -| | ... | ${node} | ${vxlan_index} -| | And VxLAN Operational Data From VAT Should Be empty | ${node} - -| TC03: Honeycomb can configure VXLAN tunnel after one has been disabled -| | [Documentation] | Check if Honeycomb API can configure VxLAN settings again\ -| | ... | after previous settings have been removed. -| | ... -| | [Teardown] | Honeycomb removes VxLAN tunnel settings -| | ... | ${node} | ${vx_interface} -| | ... -| | Given VxLAN Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${vx_interface} -| | And Honeycomb should show disabled interface in oper data -| | ... | ${node} | ${vxlan_index} -| | And VxLAN Operational Data From VAT Should Be empty | ${node} -| | When Honeycomb sets interface VxLAN configuration -| | ... | ${node} | ${vx_interface} | ${vxlan_settings2} -| | Then VxLAN Operational Data From Honeycomb Should Be -| | ... | ${node} | ${vx_interface} | ${vxlan_settings2} -| | And Honeycomb should not show disabled interface in oper data -| | ... | ${node} | ${vxlan_index} -| | And VxLAN Operational Data From VAT Should Be -| | ... | ${node} | ${vxlan_settings2} - -| TC04: Honeycomb does not set VxLAN configuration on another interface type -| | [Documentation] | Check if Honeycomb API prevents setting VxLAN\ -| | ... | on incorrect interface. -| | ... -| | Given VxLAN Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${interface} -| | And VxLAN Operational Data From VAT Should Be empty | ${node} -| | When Honeycomb fails setting VxLan on different interface type -| | ... | ${node} | ${interface} | ${vxlan_settings2} -| | Then VxLAN Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${interface} -| | And VxLAN Operational Data From VAT Should Be empty -| | ... | ${node} - -| TC05: Honeycomb does not set invalid VxLAN configuration -| | [Documentation] | Check if Honeycomb API prevents setting incorrect VxLAN\ -| | ... | settings. -| | ... -| | Given VxLAN Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${vx_interface} -| | And VxLAN Operational Data From VAT Should Be empty | ${node} -| | When Honeycomb fails setting invalid VxLAN configuration -| | ... | ${node} | ${vx_interface} | ${vxlan_invalid} -| | Then VxLAN Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${vx_interface} - -| TC06: Honeycomb configures VxLAN tunnel with ipv6 -| | [Documentation] | Check if Honeycomb API can configure VxLAN with\ -| | ... | ipv6 settings. -| | ... -| | [Teardown] | Honeycomb removes VxLAN tunnel settings -| | ... | ${node} | ${vx_interface} -| | ... -| | Given VxLAN Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${vx_interface} -| | And VxLAN Operational Data From VAT Should Be empty | ${node} -| | When Honeycomb sets interface VxLAN configuration -| | ... | ${node} | ${vx_interface} | ${vxlan_settings_ipv6} -| | Then VxLAN Operational Data From Honeycomb Should Be -| | ... | ${node} | ${vx_interface} | ${vxlan_settings_ipv6} -| | And VxLAN Operational Data From VAT Should Be -| | ... | ${node} | ${vxlan_settings_ipv6} diff --git a/tests/honeycomb/func/mgmt-cfg-vxlangpe-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-vxlangpe-apihc-apivat-func.robot deleted file mode 100644 index 6f5a406fe8..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-vxlangpe-apihc-apivat-func.robot +++ /dev/null @@ -1,172 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables *** -# Interface to run tests on. -| ${interface}= | ${node['interfaces']['port1']['name']} - -# Parameters to be set on existing interface -| ${vxlan_gpe_existing_if}= | ${interface} -| &{vxlan_gpe_base_wrong_interface_settings}= -| ... | name=${vxlan_gpe_existing_if} -| ... | type=iana-if-type:ethernetCsmacd -| ... | description=for testing purposes -| ... | enabled=true -| ... | link-up-down-trap-enable=enabled -| &{vxlan_gpe_wrong_interface_settings}= -| ... | local=192.168.50.77 -| ... | remote=192.168.50.72 -| ... | vni=${9} -| ... | next-protocol=wrong_ipv4 -| ... | encap-vrf-id=${0} -| ... | decap-vrf-id=${0} - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/vxlan_gpe.robot -# Import additional VxLAN GPE settings from resource file -| Variables | resources/test_data/honeycomb/vxlan_gpe.py -| ... -| Documentation | *Honeycomb VxLAN-GPE management test suite.* -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} - -*** Test Cases *** -| TC01: Honeycomb creates VxLAN GPE tunnel -| | [Documentation] | Check if Honeycomb API can configure a VxLAN GPE tunnel. -| | ... -| | [Tags] | HC_FUNC -| | Given interface Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${vxlan_gpe_if1} -| | And interface Operational Data From VAT Should Be empty -| | ... | ${node} | ${vxlan_gpe_if1} -| | When Honeycomb creates VxLAN GPE interface -| | ... | ${node} | ${vxlan_gpe_if1} -| | ... | ${vxlan_gpe_base_settings} | ${vxlan_gpe_settings} -| | Then VxLAN GPE Operational Data From Honeycomb Should Be -| | ... | ${node} | ${vxlan_gpe_if1} -| | ... | ${vxlan_gpe_base_settings} | ${vxlan_gpe_settings} -| | And VxLAN GPE Operational Data From VAT Should Be -| | ... | ${node} | ${vxlan_gpe_if1} | ${vxlan_gpe_settings} -| | And VxLAN GPE Interface indices from Honeycomb and VAT should correspond -| | ... | ${node} | ${vxlan_gpe_if1} - -| TC02: Honeycomb removes VxLAN GPE tunnel -| | [Documentation] | Check if Honeycomb API can remove VxLAN GPE tunnel. -| | ... -| | [Tags] | HC_FUNC -| | Given VxLAN GPE Operational Data From Honeycomb Should Be -| | ... | ${node} | ${vxlan_gpe_if1} -| | ... | ${vxlan_gpe_base_settings} | ${vxlan_gpe_settings} -| | VxLAN GPE Operational Data From VAT Should Be -| | ... | ${node} | ${vxlan_gpe_if1} | ${vxlan_gpe_settings} -| | When Honeycomb removes VxLAN GPE interface -| | ... | ${node} | ${vxlan_gpe_if1} -| | Then VxLAN GPE Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${vxlan_gpe_if1} -| | And VxLAN GPE Operational Data From VAT Should Be empty -| | ... | ${node} - -| TC03: Honeycomb sets wrong interface type while creating VxLAN GPE tunnel -| | [Documentation] | Check if Honeycomb refuses to create a VxLAN GPE tunnel\ -| | ... | with a wrong interface type set. -| | ... -| | [Tags] | HC_FUNC -| | Given interface Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${vxlan_gpe_if2} -| | And interface Operational Data From VAT Should Be empty -| | ... | ${node} | ${vxlan_gpe_if2} -| | When Honeycomb fails to create VxLAN GPE interface -| | ... | ${node} | ${vxlan_gpe_if2} -| | ... | ${vxlan_gpe_wrong_type_base_settings} | ${vxlan_gpe_settings} -| | Then interface Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${vxlan_gpe_if2} -| | And interface Operational Data From VAT Should Be empty -| | ... | ${node} | ${vxlan_gpe_if2} - -| TC04: Honeycomb sets wrong protocol while creating VxLAN GPE tunnel -| | [Documentation] | Check if Honeycomb refuses to create a VxLAN GPE tunnel\ -| | ... | with a wrong next-protocol set. -| | ... -| | [Tags] | HC_FUNC -| | Given interface Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${vxlan_gpe_if3} -| | And interface Operational Data From VAT Should Be empty -| | ... | ${node} | ${vxlan_gpe_if3} -| | When Honeycomb fails to create VxLAN GPE interface -| | ... | ${node} | ${vxlan_gpe_if3} -| | ... | ${vxlan_gpe_wrong_protocol_base_settings} -| | ... | ${vxlan_gpe_wrong_protocol_settings} -| | Then interface Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${vxlan_gpe_if3} -| | And interface Operational Data From VAT Should Be empty -| | ... | ${node} | ${vxlan_gpe_if3} - -| TC05: Honeycomb sets VxLAN GPE tunnel on existing interface with wrong type -| | [Documentation] | Check if Honeycomb refuses to create a VxLAN GPE tunnel\ -| | ... | on existing interface with wrong type. -| | ... -| | [Tags] | HC_FUNC -| | Given VxLAN GPE Operational Data From VAT Should Be empty -| | ... | ${node} -| | When Honeycomb fails to create VxLAN GPE interface -| | ... | ${node} | ${vxlan_gpe_existing_if} -| | ... | ${vxlan_gpe_base_wrong_interface_settings} -| | ... | ${vxlan_gpe_wrong_interface_settings} -| | Then VxLAN GPE Operational Data From VAT Should Be empty -| | ... | ${node} - -| TC06: Honeycomb creates VxLAN GPE tunnel with ipv6 -| | [Documentation] | Check if Honeycomb API can configure a VxLAN GPE tunnel\ -| | ... | with IPv6 addresses. -| | ... -| | [Tags] | HC_FUNC -| | Given VxLAN GPE Operational Data From VAT Should Be empty -| | ... | ${node} -| | And VxLAN GPE Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${vxlan_gpe_if5} -| | When Honeycomb creates VxLAN GPE interface -| | ... | ${node} | ${vxlan_gpe_if5} -| | ... | ${vxlan_gpe_base_ipv6_settings} | ${vxlan_gpe_ipv6_settings} -| | Then VxLAN GPE Operational Data From Honeycomb Should Be -| | ... | ${node} | ${vxlan_gpe_if5} -| | ... | ${vxlan_gpe_base_ipv6_settings} | ${vxlan_gpe_ipv6_settings} -| | And Run Keyword And Continue On Failure -| | ... | VxLAN GPE Operational Data From VAT Should Be -| | ... | ${node} | ${vxlan_gpe_if5} | ${vxlan_gpe_ipv6_settings} -| | And VxLAN GPE Interface indices from Honeycomb and VAT should correspond -| | ... | ${node} | ${vxlan_gpe_if5} - -| TC07: Honeycomb creates a second VxLAN GPE tunnel with ipv6 -| | [Documentation] | Check if Honeycomb API can configure another VxLAN\ -| | ... | GPE tunnel with IPv6 addresses. -| | ... -| | [Tags] | HC_FUNC -| | Given interface Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${vxlan_gpe_if6} -| | And interface Operational Data From VAT Should Be empty -| | ... | ${node} | ${vxlan_gpe_if6} -| | When Honeycomb creates VxLAN GPE interface -| | ... | ${node} | ${vxlan_gpe_if6} -| | ... | ${vxlan_gpe_base_ipv6_settings2} | ${vxlan_gpe_ipv6_settings2} -| | Then VxLAN GPE Operational Data From Honeycomb Should Be -| | ... | ${node} | ${vxlan_gpe_if6} -| | ... | ${vxlan_gpe_base_ipv6_settings2} | ${vxlan_gpe_ipv6_settings2} -| | And VxLAN GPE Operational Data From VAT Should Be -| | ... | ${node} | ${vxlan_gpe_if6} | ${vxlan_gpe_ipv6_settings2} -| | And VxLAN GPE Interface indices from Honeycomb and VAT should correspond -| | ... | ${node} | ${vxlan_gpe_if6} diff --git a/tests/honeycomb/func/mgmt-notif-apihcnc-func.robot b/tests/honeycomb/func/mgmt-notif-apihcnc-func.robot deleted file mode 100644 index ad47861ffa..0000000000 --- a/tests/honeycomb/func/mgmt-notif-apihcnc-func.robot +++ /dev/null @@ -1,73 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables *** -# Interfaces to run tests on. -| ${interface}= | ${node['interfaces']['port1']['name']} -| ${tap_interface}= | tap_test -| ${tap_interface_vpp}= | tap0 -| &{tap_settings}= | host-interface-name=tap_test | mac=08:00:27:c0:5d:37 -| ... | id=${1} -| &{tap_settings_oper}= | host-interface-name=tap_test | device-name=tap0 -| ... | mac=08:00:27:c0:5d:37 | rx_ring_sz=${256} | tx_ring_sz=${256} | id=${1} -| &{tap_settings_vat}= | dev_name=tap0 | mac=08:00:27:c0:5d:37 -| ... | rx_ring_sz=${256} | tx_ring_sz=${256} | id=${1} - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/tap.robot -| Resource | resources/libraries/robot/honeycomb/notifications.robot -| ... -| Documentation | *Honeycomb notifications test suite.* -| ... -| Suite Setup | Set Up Honeycomb Notifications Functional Test Suite -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Force Tags | HC_FUNC - -*** Test Cases *** -| TC01: Honeycomb sends notification on interface state change -| | [Documentation] | Check if Honeycomb sends a state-changed notification\ -| | ... | when the state of an interface is changed. -| | ... -| | Given Interface state from Honeycomb should be -| | ... | ${node} | ${interface} | down -| | And Interface state from VAT should be | ${node} | ${interface} | down -| | And Notification listener should be established | ${node} -| | When Honeycomb configures interface state | ${node} | ${interface} | up -| | Then Honeycomb should send interface state notification | ${interface} | up -| | When Honeycomb configures interface state | ${node} | ${interface} | down -| | And Honeycomb should send interface state notification | ${interface} | down - -| TC02: Honeycomb sends notification on interface deletion -| | [Documentation] | Check if Honeycomb sends an interface-deleted notification -| | ... | when an interface is deleted. -| | ... -| | Given TAP Operational Data From Honeycomb Should Be -| | ... | ${node} | ${tap_interface} | ${tap_settings_oper} -| | And TAP Operational Data From VAT Should Be -| | ... | ${node} | ${tap_interface_vpp} | ${tap_settings_vat} -| | And Notification listener should be established | ${node} -| | When Honeycomb removes TAP interface | ${node} | ${tap_interface} -| | Then Honeycomb should send interface deleted notification | ${tap_interface} - -*** Keywords *** -| Set Up Honeycomb Notifications Functional Test Suite -| | Set Up Honeycomb Functional Test Suite | ${node} -| | Honeycomb configures interface state -| | ... | ${node} | ${interface} | down -| | Honeycomb creates TAP interface -| | ... | ${node} | ${tap_interface} | ${tap_settings}
\ No newline at end of file diff --git a/tests/honeycomb/func/mgmt-statepersist-apihc-func.robot b/tests/honeycomb/func/mgmt-statepersist-apihc-func.robot deleted file mode 100644 index b7fe610b18..0000000000 --- a/tests/honeycomb/func/mgmt-statepersist-apihc-func.robot +++ /dev/null @@ -1,166 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables*** -# Interface to run tests on. -| ${interface}= | ${node['interfaces']['port1']['name']} - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/persistence.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot -| Resource | resources/libraries/robot/honeycomb/l2_fib.robot -| ... -| Suite Setup | Run Keywords -| ... | Configure Persistence | ${node} | enable | AND -| ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node} -| ... -| Suite Teardown | Configure Persistence | ${node} | disable -| ... -| Force Tags | HC_PERSIST | HC_REST_ONLY -| ... -| Documentation | *Honeycomb configuration persistence test suite.* - -*** Test Cases *** -# multi-feature cases -# =================== -| TC01: Honeycomb persists configuration through restart of both Honeycomb and VPP -| | [Documentation] | Checks if Honeycomb maintains configuration after both\ -| | ... | Restart Honeycomb and VPP. -| | ... -| | [Teardown] -| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node} -| | ... -| | Given Multi-Feature Persistence test configuration | ${node} | ${interface} -| | And Multi-Feature persistence Test Verification | ${node} | ${interface} -| | And Log persisted configuration on node | ${node} -| | When Restart Honeycomb and VPP in pesistence test | ${node} -| | Then Multi-Feature persistence Test Verification | ${node} | ${interface} - -| TC02: Honeycomb reverts to defaults if persistence files are invalid -| | [Documentation] | Checks if Honeycomb reverts to default configuration when\ -| | ... | persistence files are damaged or invalid. -| | ... -| | [Tags] | HC_FUNC -| | ... -| | [Teardown] -| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node} -| | ... -| | Given Multi-Feature Persistence test configuration | ${node} | ${interface} -| | And Multi-Feature persistence Test Verification | ${node} | ${interface} -| | When Persistence file is damaged during restart | ${node} -| | Then Honeycomb and VPP should have default configuration | ${node} - -| TC03: Honeycomb persists configuration through restart of Honeycomb -| | [Documentation] | Checks if Honeycomb maintains configuration after it\ -| | ... | is restarted. -| | ... -| | [Teardown] -| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node} -| | ... -| | Given Multi-Feature Persistence test configuration | ${node} | ${interface} -| | And Multi-Feature persistence Test Verification | ${node} | ${interface} -| | And Log persisted configuration on node | ${node} -| | When Restart Honeycomb | ${node} -| | Then Multi-Feature persistence Test Verification | ${node} | ${interface} - -| TC04: Honeycomb persists configuration through restart of VPP -| | [Documentation] | Checks if Honeycomb updates VPP settings after VPP is\ -| | ... | restarted. -| | ... -| | [Teardown] -| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node} -| | ... -| | Given Multi-Feature Persistence test configuration | ${node} | ${interface} -| | And Multi-Feature persistence Test Verification | ${node} | ${interface} -| | And Log persisted configuration on node | ${node} -| | When Restart VPP | ${node} -| | Then Multi-Feature persistence Test Verification | ${node} | ${interface} - -# single-feature cases -# ==================== - -| TC05: Persist configuration of IP addresses and neighbors - HC and VPP restart -| | [Documentation] | Verify persistence of interface state, IPv4 address -| | ... | and neighbor entries through restart of both Honeycomb and VPP. -| | ... -| | [Teardown] -| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node} -| | ... -| | Given Interface Persistence Setup | ${node} -| | And Interface Persistence Check | ${node} -| | When Restart Honeycomb and VPP in pesistence test | ${node} -| | Then Interface Persistence Check | ${node} - -| TC06: Persist configuration of IP addresses and neighbors - HC restart -| | [Documentation] | Verify persistence of interface state, IPv4 address -| | ... | and neighbor entries through restart of Honeycomb. -| | ... -| | [Teardown] -| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node} -| | ... -| | Given Interface Persistence Setup | ${node} -| | And Interface Persistence Check | ${node} -| | When Restart Honeycomb | ${node} -| | Then Interface Persistence Check | ${node} - -| TC07: Persist configuration of IP addresses and neighbors - VPP restart -| | [Documentation] | Verify persistence of interface state, IPv4 address -| | ... | and neighbor entries through restart of VPP. -| | ... -| | [Teardown] -| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node} -| | ... -| | Given Interface Persistence Setup | ${node} -| | And Interface Persistence Check | ${node} -| | When Restart VPP | ${node} -| | Then Interface Persistence Check | ${node} - -| TC08: Honeycomb persists configuration of bridge domains - HC and VPP restart -| | [Documentation] | Verify persistence of bridge domain, L2-FIB entry -| | ... | and Bridge domain Operational Interface Assignment through restart -| | ... | of both Honeycomb and VPP. -| | ... -| | [Teardown] -| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node} -| | ... -| | Given Bridge Domain Persistence Setup | ${node} -| | When Restart Honeycomb and VPP in pesistence test | ${node} -| | Then Bridge Domain Persistence Check | ${node} - -| TC09: Honeycomb persists configuration of bridge domains - HC restart -| | [Documentation] | Verify persistence of bridge domain, L2-FIB entry -| | ... | and Bridge domain Operational Interface Assignment through restart -| | ... | of Honeycomb. -| | ... -| | [Teardown] -| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node} -| | ... -| | Given Bridge Domain Persistence Setup | ${node} -| | When Restart Honeycomb | ${node} -| | Then Bridge Domain Persistence Check | ${node} - -| TC10: Honeycomb persists configuration of bridge domains - VPP restart -| | [Documentation] | Verify persistence of bridge domain, L2-FIB entry -| | ... | and Bridge domain Operational Interface Assignment through restart -| | ... | of VPP. -| | ... -| | [Teardown] -| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node} -| | ... -| | Given Bridge Domain Persistence Setup | ${node} -| | When Restart VPP | ${node} -| | Then Bridge Domain Persistence Check | ${node} - -#TODO: All other features diff --git a/tests/honeycomb/perf/__init__.robot b/tests/honeycomb/perf/__init__.robot deleted file mode 100644 index 6b5e67f331..0000000000 --- a/tests/honeycomb/perf/__init__.robot +++ /dev/null @@ -1,64 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables*** -# Honeycomb node to run tests on. -| ${node}= | ${nodes['DUT1']} - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/performance.robot -| Library | resources.libraries.python.SetupFramework -| Library | resources.libraries.python.SetupFramework.CleanupFramework -| Library | resources.libraries.python.CpuUtils -| Library | resources.libraries.python.honeycomb.Performance -| Suite Setup | Setup suite for Honeycomb performance tests -| Suite Teardown | Run Keywords -| ... | Stop VPP Service | ${node} -| ... | AND | Archive Honeycomb Logs | ${node} | perf=${True} -| ... | AND | Stop honeycomb service on DUTs | ${node} -| ... | AND | Cleanup Framework | ${nodes} - -*** Keywords *** -| Setup suite for Honeycomb performance tests -| | [Documentation] | Setup variables and configure VPP and Honeycomb -| | ... | for performance testing. -| | ... -| | Set Global Variable | ${node} -| | Get CPU Info from All Nodes | ${nodes} -| | ${cores}= | Get Length | ${node['cpuinfo']} -| | Set Global Variable | ${cores} -| | Stop VPP Service | ${node} -| | Stop Honeycomb service on DUTs | ${node} -| | Generate VPP Startup Configuration for Honeycomb Test on DUT | ${node} -| | Configure Restconf binding address | ${node} -| | Configure Log Level | ${node} | INFO -| | Configure Persistence | ${node} | disable -| | Configure jVPP timeout | ${node} | ${14} -| | Generate Honeycomb startup configuration for performance test -| | ... | ${node} | ${cores} -| | Clear Persisted Honeycomb Configuration | ${node} - -| Configure ODL Client for performance tests -| | [Documentation] | Setup ODL client for performance testing. -| | ... -| | ${use_odl_client}= | Get Variable Value | ${HC_ODL} -| | Run Keyword If | '${use_odl_client}' != '${NONE}' -| | ... | Run Keywords -| | ... | Set Global Variable | ${use_odl_client} -| | ... | AND | Copy ODL client | ${node} | ${HC_ODL} | ~ | ${install_dir} -| | ... | AND | Configure ODL Client Service On DUT | ${node} | ${install_dir} -| | ... | ELSE | Log | Variable HC_ODL is not present. Not using ODL. -| | ... | level=INFO diff --git a/tests/honeycomb/perf/localhostp1-tcp-netconf16t-crud-read.robot b/tests/honeycomb/perf/localhostp1-tcp-netconf16t-crud-read.robot deleted file mode 100644 index c13851cc62..0000000000 --- a/tests/honeycomb/perf/localhostp1-tcp-netconf16t-crud-read.robot +++ /dev/null @@ -1,87 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/honeycomb/performance.robot -| ... -| Suite Setup | Run Keywords -| ... | Configure Honeycomb Netconf threads | ${node} | ${16} -| ... | AND | Honeycomb Performance Suite Setup Generic | ${node} -| ... -| Suite Teardown | Honeycomb Performance Suite Teardown Generic | ${node} -| ... -| Force Tags | HC_PERF -| ... -| Documentation | *Base Netconf operational read test suite with sixteen Netconf -| ... | threads.* -| ... -| ... | *[Top] Network Topologies:* DUT1 single-node topology. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP. -| ... | *[Cfg] DUT configuration:* Default -| ... | *[Ver] verification:* DUT verifies Honeycomb's response times with zero -| ... | error or loss tolerance. Test packets are generated by DUT1 on localhost -| ... | loopback interface. -| ... | Traffic profile contains flow-groups containing REST requests -| ... | for operational reads. -| ... | *[Ref] Applicable standard specifications:* RFC6241. - -*** Test Cases *** -| TC01: Base operational read with 1 TG thread -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in a single thread. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${1} -| | ${entries}= | Set Variable | ${100000} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC02: Base operational read with 2 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in two threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${2} -| | ${entries}= | Set Variable | ${50000} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC03: Base operational read with 4 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in four threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${4} -| | ${entries}= | Set Variable | ${25000} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC04: Base operational read with 8 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in eigth threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${8} -| | ${entries}= | Set Variable | ${12500} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC05: Base operational read with 16 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in sixteen threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${16} -| | ${entries}= | Set Variable | ${6250} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} diff --git a/tests/honeycomb/perf/localhostp1-tcp-netconf1t-crud-read.robot b/tests/honeycomb/perf/localhostp1-tcp-netconf1t-crud-read.robot deleted file mode 100644 index d46fdf795b..0000000000 --- a/tests/honeycomb/perf/localhostp1-tcp-netconf1t-crud-read.robot +++ /dev/null @@ -1,87 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/honeycomb/performance.robot -| ... -| Suite Setup | Run Keywords -| ... | Configure Honeycomb Netconf threads | ${node} | ${1} -| ... | AND | Honeycomb Performance Suite Setup Generic | ${node} -| ... -| Suite Teardown | Honeycomb Performance Suite Teardown Generic | ${node} -| ... -| Force Tags | HC_PERF -| ... -| Documentation | *Base Netconf operational read test suite with one Netconf -| ... | thread.* -| ... -| ... | *[Top] Network Topologies:* DUT1 single-node topology. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP. -| ... | *[Cfg] DUT configuration:* Default -| ... | *[Ver] verification:* DUT verifies Honeycomb's response times with zero -| ... | error or loss tolerance. Test packets are generated by DUT1 on localhost -| ... | loopback interface. -| ... | Traffic profile contains flow-groups containing REST requests -| ... | for operational reads. -| ... | *[Ref] Applicable standard specifications:* RFC6241. - -*** Test Cases *** -| TC01: Base operational read with 1 TG thread -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in a single thread. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${1} -| | ${entries}= | Set Variable | ${100000} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC02: Base operational read with 2 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in two threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${2} -| | ${entries}= | Set Variable | ${50000} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC03: Base operational read with 4 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in four threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${4} -| | ${entries}= | Set Variable | ${25000} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC04: Base operational read with 8 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in eigth threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${8} -| | ${entries}= | Set Variable | ${12500} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC05: Base operational read with 16 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in sixteen threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${16} -| | ${entries}= | Set Variable | ${6250} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} diff --git a/tests/honeycomb/perf/localhostp1-tcp-netconf8t-crud-read.robot b/tests/honeycomb/perf/localhostp1-tcp-netconf8t-crud-read.robot deleted file mode 100644 index 9928f15f1d..0000000000 --- a/tests/honeycomb/perf/localhostp1-tcp-netconf8t-crud-read.robot +++ /dev/null @@ -1,97 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/honeycomb/performance.robot -| ... -| Suite Setup | Run Keywords -| ... | Configure Honeycomb Netconf threads | ${node} | ${8} -| ... | AND | Honeycomb Performance Suite Setup Generic | ${node} -| ... -| Suite Teardown | Honeycomb Performance Suite Teardown Generic | ${node} -| ... -| Force Tags | HC_PERF -| ... -| Documentation | *Base Netconf operational read test suite with eight Netconf -| ... | threads.* -| ... -| ... | *[Top] Network Topologies:* DUT1 single-node topology. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP. -| ... | *[Cfg] DUT configuration:* Default -| ... | *[Ver] verification:* DUT verifies Honeycomb's response times with zero -| ... | error or loss tolerance. Test packets are generated by DUT1 on localhost -| ... | loopback interface. -| ... | Traffic profile contains flow-groups containing REST requests -| ... | for operational reads. -| ... | *[Ref] Applicable standard specifications:* RFC6241. - -*** Test Cases *** -| TC01: Base operational read with 1 TG thread -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in a single thread. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${1} -| | ${entries}= | Set Variable | ${100000} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC02: Base operational read with 2 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in two threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${2} -| | ${entries}= | Set Variable | ${50000} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC03: Base operational read with 4 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in four threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${4} -| | ${entries}= | Set Variable | ${25000} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC04: Base operational read with 8 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in eigth threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${8} -| | ${entries}= | Set Variable | ${12500} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC05: Base operational read with 16 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in sixteen threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${16} -| | ${entries}= | Set Variable | ${6250} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC05: Base operational read with 24 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in sixteen threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${24} -| | ${entries}= | Set Variable | ${6250} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} |