aboutsummaryrefslogtreecommitdiffstats
path: root/tests
diff options
context:
space:
mode:
authorTibor Frank <tifrank@cisco.com>2016-08-24 16:09:20 +0200
committerTibor Frank <tifrank@cisco.com>2016-09-05 14:02:48 +0200
commitc3bf9f6ad20223998c1103ba3061a5e338979e2b (patch)
treeeb8aca3374dc12f708d6fe9fcfd9f70eab6d1a3c /tests
parent752104dfc1b8453367f0d6740f628b702c07e0b5 (diff)
CSIT-229: ip4-lispgpe-ip4
- main fib, - vrf, - phy2lisp Change-Id: Ic9bacef4574dc07b25041c4cd0653825a65c94fb Signed-off-by: Tibor Frank <tifrank@cisco.com>
Diffstat (limited to 'tests')
-rw-r--r--tests/func/lisp/lisp_ipv4_lispgpe_ipv4.robot179
1 files changed, 179 insertions, 0 deletions
diff --git a/tests/func/lisp/lisp_ipv4_lispgpe_ipv4.robot b/tests/func/lisp/lisp_ipv4_lispgpe_ipv4.robot
new file mode 100644
index 0000000000..8a18962e35
--- /dev/null
+++ b/tests/func/lisp/lisp_ipv4_lispgpe_ipv4.robot
@@ -0,0 +1,179 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.topology.Topology
+| Library | resources.libraries.python.NodePath
+| Library | resources.libraries.python.Trace
+| Library | resources.libraries.python.IPUtil
+| Library | resources.libraries.python.LispUtil
+| Resource | resources/libraries/robot/traffic.robot
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/interfaces.robot
+| Resource | resources/libraries/robot/testing_path.robot
+| Resource | resources/libraries/robot/ipv4.robot
+| Resource | resources/libraries/robot/lisp/lispgpe.robot
+# Import configuration and test data:
+| Variables | resources/test_data/lisp/ipv4_lispgpe_ipv4/ipv4_lispgpe_ipv4.py
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | EXPECTED_FAILING
+| ...
+| Test Setup | Run Keywords | Setup all DUTs before test
+| ... | AND | Setup all TGs before traffic script
+| ... | AND | Update All Interface Data On All Nodes | ${nodes}
+| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
+| ... | AND | Show vpp trace dump on all DUTs
+| ... | AND | VPP Show Errors | ${nodes['DUT1']}
+| ... | AND | VPP Show Errors | ${nodes['DUT2']}
+| ...
+| Documentation | *ip4-lispgpe-ip4 encapsulation test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2,
+| ... | Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
+| ... | routing and static routes. LISPoIPv4 tunnel is configured between
+| ... | DUT1 and DUT2.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in
+| ... | both directions by TG on links to DUT1 and DUT2; on receive
+| ... | TG verifies packets for correctness and their IPv4 src-addr, dst-addr
+| ... | and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC6830.
+
+*** Test Cases ***
+| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using physical interfaces
+| | [Documentation]
+| | ... | Case: ip4-lispgpe-ip4 - phy2lisp \
+| | ... | [Top] TG-DUT1-DUT2-TG.
+| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on
+| | ... | TG-DUTn.
+| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2.
+| | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces across both
+| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on received
+| | ... | packets are correct.
+| | ... | [Ref] RFC6830.
+| | ...
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in 3-node path are up
+| | And IP addresses are set on interfaces
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} | ${prefix4}
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${prefix4}
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} | ${prefix4}
+| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} | ${prefix4}
+| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4}
+| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4}
+| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4}
+| | ... | ${tg_to_dut2_mac}
+| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4}
+| | ... | ${tg_to_dut1_mac}
+| | When Set up LISP GPE topology
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
+| | ... | ${dut1_to_dut2_ip4_static_adjacency}
+| | ... | ${dut2_to_dut1_ip4_static_adjacency}
+| | Then Send Packet And Check Headers
+| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
+| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
+| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
+| | And Send Packet And Check Headers
+| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
+| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
+| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
+
+| TC02: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using physical interfaces and VRF is enabled
+| | [Documentation]
+| | ... | Case: ip4-lispgpe-ip4 - vrf, phy2lisp \
+| | ... | [Top] TG-DUT1-DUT2-TG.
+| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on
+| | ... | TG-DUTn.
+| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2.
+| | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces across both
+| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on received
+| | ... | packets are correct.
+| | ... | [Ref] RFC6830.
+| | ...
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in 3-node path are up
+| | When Setup VRF on DUT | ${dut1_node} | ${dut1_fib_table} | ${dut1_to_dut2}
+| | ... | ${dut2_to_dut1_ip4} | ${dut2_to_dut1_mac} | ${tg2_ip4} | ${dut1_to_tg}
+| | ... | ${tg1_ip4} | ${tg_to_dut1_mac} | ${prefix4}
+| | And Setup VRF on DUT | ${dut2_node} | ${dut2_fib_table} | ${dut2_to_dut1}
+| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_dut2_mac} | ${tg1_ip4} | ${dut2_to_tg}
+| | ... | ${tg2_ip4} | ${tg_to_dut2_mac} | ${prefix4}
+| | And IP addresses are set on interfaces
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} | ${prefix4}
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${prefix4}
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} | ${prefix4}
+| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} | ${prefix4}
+| | And Set up LISP GPE topology
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
+| | ... | ${dut1_to_dut2_ip4_static_adjacency}
+| | ... | ${dut2_to_dut1_ip4_static_adjacency}
+| | Then Send Packet And Check Headers
+| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
+| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
+| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
+| | And Send Packet And Check Headers
+| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
+| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
+| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
+
+*** Keywords ***
+| Setup VRF on DUT
+| | [Documentation]
+| | ... | The keyword sets a FIB table on a DUT, assigns two interfaces to it,\
+| | ... | adds two ARP items and a route, see example.
+| | ...
+| | ... | *Example:*
+| | ... | Three-node topology:
+| | ... | TG_if1 - DUT1_if1-DUT1_if2 - DUT2_if1-DUT2_if2 - TG_if2
+| | ... | Create one VRF on each DUT:
+| | ... | \| Setup VRF on DUT \| ${dut1_node} \| ${dut1_fib_table} \
+| | ... | \| ${dut1_to_dut2} \| ${dut2_to_dut1_ip4} \| ${dut2_to_dut1_mac} \
+| | ... | \| ${tg2_ip4} \| ${dut1_to_tg} \| ${tg1_ip4} \| ${tg_to_dut1_mac} \
+| | ... | \| 24 \|
+| | ... | \| Setup VRF on DUT \| ${dut2_node} \| ${dut2_fib_table} \
+| | ... | \| ${dut2_to_dut1} \| ${dut1_to_dut2_ip4} \| ${dut1_to_dut2_mac} \
+| | ... | \| ${tg1_ip4} \| ${dut2_to_tg} \| ${tg2_ip4} \| ${tg_to_dut2_mac} \
+| | ... | \| 24 \|
+| | ...
+| | [Arguments]
+| | ... | ${node} | ${table} | ${route_interface} | ${route_gateway_ip}
+| | ... | ${route_gateway_mac} | ${route_dst_ip} | ${vrf_src_if} | ${src_if_ip}
+| | ... | ${src_if_mac} | ${prefix_len}
+| | ...
+| | ${route_interface_idx}= | Get Interface SW Index
+| | ... | ${node} | ${route_interface}
+| | ...
+| | Add fib table | ${node}
+| | ... | ${route_dst_ip} | ${prefix_len} | ${table}
+| | ... | via ${route_gateway_ip} sw_if_index ${route_interface_idx} multipath
+| | ...
+| | Assign Interface To Fib Table
+| | ... | ${node} | ${route_interface} | ${table}
+| | Assign Interface To Fib Table
+| | ... | ${node} | ${vrf_src_if} | ${table}
+| | ...
+| | Add Arp On Dut | ${node} | ${vrf_src_if}
+| | ... | ${src_if_ip} | ${src_if_mac} | vrf=${table}
+| | Add Arp On Dut | ${node} | ${route_interface}
+| | ... | ${route_gateway_ip} | ${route_gateway_mac} | vrf=${table}
+| | ...
+| | Vpp Route Add | ${node} | ${route_dst_ip} | ${prefix_len}
+| | ... | ${route_gateway_ip} | ${route_interface} | vrf=${table}