Add: avf-dot1q testcases

+ Few fixes in doc
+ Align testcases

Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I5575db8255a74fd46f37d5cc2637b9b4448bcd7f
(cherry picked from commit a0a1bdba6245c685898bab5007de28452bbd2d27)

10 files changed, 469 insertions, 67 deletions

diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot
index ee3d1369ec..d301e48fac 100644
--- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot
@@ -15,56 +15,56 @@
 | Resource | resources/libraries/robot/shared/default.robot
 | ...
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | MEMIF | SINGLE_MEMIF | DOCKER
+| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | DOT1Q | IP4BASE | DRV_AVF
 | ...
-| Suite Setup | Setup suite single link | performance
-| Suite Teardown | Tear down suite | performance
+| Suite Setup | Setup suite single link | performance_avf
+| Suite Teardown | Tear down suite | performance | vifs
 | Test Setup | Setup test
-| Test Teardown | Tear down test | performance | container
+| Test Teardown | Tear down test | performance
 | ...
 | Test Template | Local Template
 | ...
-| Documentation | *RFC2544: Pkt throughput L2XC test cases*
+| Documentation | *RFC2544: Pkt throughput IPv4 routing with IEEE 802.1Q test\
+| ... | cases*
 | ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 configured with L2 cross-
-| ... | connect. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface running same VPP
-| ... | version as running on DUT. Resources are limited via cgroup to use 5
-| ... | cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints. Cross Horizontal topology with packets flowing via DUT (VPP)
-| ... | to Container, then via horizontal memif to the next Container, and so on
-| ... | until the last Container then to NIC (in last Container). Single
-| ... | Container is supported as of now.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. IEEE 802.1Q\
+| ... | tagging is applied on link between DUT1 and DUT2.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
+| ... | routing and two static IPv4 /30 route entries. DUT1 and DUT2 tested\
+| ... | with ${nic_name} with VF enabled.
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
 | ... | of packets transmitted. NDR and PDR are discovered for different\
 | ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | Test packets are\
+| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\
+| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\
+| ... | all packets containing Ethernet header, IPv4 header with IP\
+| ... | protocol=61 and static payload. MAC addresses are matching MAC\
 | ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
+| ${osi_layer}= | L3
 | ${nic_name}= | Intel-X710
-| ${osi_layer}= | L2
-| ${overhead}= | ${0}
-# Traffic profile
+| ${overhead}= | ${4}
+| ${subid}= | 10
+| ${tag_rewrite}= | pop-1
+# TG subnets used by T-Rex
+| ${tg_if1_net}= | 10.10.10.0
+| ${tg_if2_net}= | 20.20.20.0
+# Traffic profile:
 | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | cross_horiz
 
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Cfg] Each DUT runs IPv4 routing with VLAN and uses ${phy_cores}\
+| | ... | physical core(s) for worker threads.
 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
 | | ...
 | | ... | *Arguments:*
@@ -78,58 +78,59 @@
 | | Set Test Variable | \${frame_size}
 | | ...
 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add single PCI device to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | And Add DPDK no PCI to all DUTs
+| | And Set Max Rate And Jumbo
 | | And Apply startup configuration on all VPP DUTs
-| | When Start containers for test
-| | And Initialize L2 xconnect for single memif
+| | When Initialize AVF interfaces
+| | And Initialize IPv4 forwarding with VLAN dot1q sub-interfaces in circular topology
+| | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| tc01-64B-1c-eth-l2xcbase-eth-1memif-1dcr-ndrpdr
+| tc01-64B-1c-avf-dot1q-ip4base-ndrpdr
 | | [Tags] | 64B | 1C
 | | frame_size=${64} | phy_cores=${1}
 
-| tc02-64B-2c-eth-l2xcbase-eth-1memif-1dcr-ndrpdr
+| tc02-64B-2c-avf-dot1q-ip4base-ndrpdr
 | | [Tags] | 64B | 2C
 | | frame_size=${64} | phy_cores=${2}
 
-| tc03-64B-4c-eth-l2xcbase-eth-1memif-1dcr-ndrpdr
+| tc03-64B-4c-avf-dot1q-ip4base-ndrpdr
 | | [Tags] | 64B | 4C
 | | frame_size=${64} | phy_cores=${4}
 
-| tc04-1518B-1c-eth-l2xcbase-eth-1memif-1dcr-ndrpdr
+| tc04-1518B-1c-avf-dot1q-ip4base-ndrpdr
 | | [Tags] | 1518B | 1C
 | | frame_size=${1518} | phy_cores=${1}
 
-| tc05-1518B-2c-eth-l2xcbase-eth-1memif-1dcr-ndrpdr
+| tc05-1518B-2c-avf-dot1q-ip4base-ndrpdr
 | | [Tags] | 1518B | 2C
 | | frame_size=${1518} | phy_cores=${2}
 
-| tc06-1518B-4c-eth-l2xcbase-eth-1memif-1dcr-ndrpdr
+| tc06-1518B-4c-avf-dot1q-ip4base-ndrpdr
 | | [Tags] | 1518B | 4C
 | | frame_size=${1518} | phy_cores=${4}
 
-| tc07-9000B-1c-eth-l2xcbase-eth-1memif-1dcr-ndrpdr
+| tc07-9000B-1c-avf-dot1q-ip4base-ndrpdr
 | | [Tags] | 9000B | 1C
 | | frame_size=${9000} | phy_cores=${1}
 
-| tc08-9000B-2c-eth-l2xcbase-eth-1memif-1dcr-ndrpdr
+| tc08-9000B-2c-avf-dot1q-ip4base-ndrpdr
 | | [Tags] | 9000B | 2C
 | | frame_size=${9000} | phy_cores=${2}
 
-| tc09-9000B-4c-eth-l2xcbase-eth-1memif-1dcr-ndrpdr
+| tc09-9000B-4c-avf-dot1q-ip4base-ndrpdr
 | | [Tags] | 9000B | 4C
 | | frame_size=${9000} | phy_cores=${4}
 
-| tc10-IMIX-1c-eth-l2xcbase-eth-1memif-1dcr-ndrpdr
+| tc10-IMIX-1c-avf-dot1q-ip4base-ndrpdr
 | | [Tags] | IMIX | 1C
 | | frame_size=IMIX_v4_1 | phy_cores=${1}
 
-| tc11-IMIX-2c-eth-l2xcbase-eth-1memif-1dcr-ndrpdr
+| tc11-IMIX-2c-avf-dot1q-ip4base-ndrpdr
 | | [Tags] | IMIX | 2C
 | | frame_size=IMIX_v4_1 | phy_cores=${2}
 
-| tc12-IMIX-4c-eth-l2xcbase-eth-1memif-1dcr-ndrpdr
+| tc12-IMIX-4c-avf-dot1q-ip4base-ndrpdr
 | | [Tags] | IMIX | 4C
 | | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot
index 8373afbca0..dfb3bef6f9 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot
@@ -33,7 +33,7 @@
 | ... | tagging is applied on link between DUT1 and DUT2.
 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
 | ... | routing and two static IPv4 /30 route entries. DUT1 and DUT2 tested\
-| ... | with ${nic_name}.\
+| ... | with ${nic_name}.
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot
new file mode 100644
index 0000000000..b962529184
--- /dev/null
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot
@@ -0,0 +1,136 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
+| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | DOT1Q | IP4BASE | DRV_AVF
+| ...
+| Suite Setup | Setup suite single link | performance_avf
+| Suite Teardown | Tear down suite | performance | vifs
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *RFC2544: Pkt throughput IPv4 routing with IEEE 802.1Q test\
+| ... | cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\
+| ... | single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. IEEE 802.1Q\
+| ... | tagging is applied on link between DUT1-if2 and TG-if2.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
+| ... | two static IPv4 /30 route entries. DUT1 is tested with ${nic_name}.\
+| ... | with VF enabled.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are\
+| ... | generated by TG on links to DUT1. TG traffic profile contains two L3\
+| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\
+| ... | all packets containing Ethernet header, IPv4 header with IP\
+| ... | protocol=61 and static payload. MAC addresses are matching MAC\
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
+| ${osi_layer}= | L3
+| ${nic_name}= | Intel-X710
+| ${overhead}= | ${4}
+| ${subid}= | 10
+| ${tag_rewrite}= | pop-1
+# TG subnets used by T-Rex
+| ${tg_if1_net}= | 10.10.10.0
+| ${tg_if2_net}= | 20.20.20.0
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-2n-dot1qip4asym-ip4src254
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] Each DUT runs IPv4 routing with VLAN and uses ${phy_cores}\
+| | ... | physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add DPDK no PCI to all DUTs
+| | And Set Max Rate And Jumbo
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize AVF interfaces
+| | And Initialize IPv4 forwarding with VLAN dot1q sub-interfaces in circular topology
+| | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-avf-dot1q-ip4base-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-avf-dot1q-ip4base-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-avf-dot1q-ip4base-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-avf-dot1q-ip4base-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-avf-dot1q-ip4base-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-avf-dot1q-ip4base-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc07-9000B-1c-avf-dot1q-ip4base-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| tc08-9000B-2c-avf-dot1q-ip4base-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| tc09-9000B-4c-avf-dot1q-ip4base-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| tc10-IMIX-1c-avf-dot1q-ip4base-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-avf-dot1q-ip4base-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-avf-dot1q-ip4base-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot
index 954e36dcdc..77cd70a812 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot
@@ -32,7 +32,7 @@
 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. IEEE 802.1Q\
 | ... | tagging is applied on link between DUT1-if2 and TG-if2.
 | ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | two static IPv4 /30 route entries. DUT1 is tested with ${nic_name}.\
+| ... | two static IPv4 /30 route entries. DUT1 is tested with ${nic_name}.
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
diff --git a/tests/vpp/perf/l2/10ge2p1x710-avf-dot1q-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-avf-dot1q-l2bdbasemaclrn-ndrpdr.robot
new file mode 100644
index 0000000000..fb4ae166bc
--- /dev/null
+++ b/tests/vpp/perf/l2/10ge2p1x710-avf-dot1q-l2bdbasemaclrn-ndrpdr.robot
@@ -0,0 +1,135 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
+| ... | NIC_Intel-X710 | BASE | DOT1Q | L2BDMACLRN | DRV_AVF
+| ...
+| Suite Setup | Setup suite single link | performance_avf
+| Suite Teardown | Tear down suite | performance | vifs
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. IEEE\
+| ... | 802.1Q tagging is applied on link between DUT1 and DUT2.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge\
+| ... | domain and MAC learning enabled. DUT1 and DUT2 are tested
+| ... | with ${nic_name} with VF enabled.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are\
+| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\
+| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\
+| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG\
+| ... | node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
+| ${osi_layer}= | L2
+| ${nic_name}= | Intel-X710
+| ${overhead}= | ${4}
+| ${subid}= | 10
+| ${tag_rewrite}= | pop-1
+# Bridge domain IDs
+| ${bd_id1}= | 1
+| ${bd_id2}= | 2
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] Each DUT runs L2BD config with VLAN and uses ${phy_cores}\
+| | ... | physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add DPDK no PCI to all DUTs
+| | And Set Max Rate And Jumbo
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize AVF interfaces
+| | And Initialize L2 bridge domains with VLAN dot1q sub-interfaces in circular topology
+| | ... | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-avf-dot1q-l2bdbasemaclrn-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-avf-dot1q-l2bdbasemaclrn-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-avf-dot1q-l2bdbasemaclrn-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-avf-dot1q-l2bdbasemaclrn-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-avf-dot1q-l2bdbasemaclrn-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-avf-dot1q-l2bdbasemaclrn-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc07-9000B-1c-avf-dot1q-l2bdbasemaclrn-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| tc08-9000B-2c-avf-dot1q-l2bdbasemaclrn-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| tc09-9000B-4c-avf-dot1q-l2bdbasemaclrn-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| tc10-IMIX-1c-avf-dot1q-l2bdbasemaclrn-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-avf-dot1q-l2bdbasemaclrn-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-avf-dot1q-l2bdbasemaclrn-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2bdbasemaclrn-ndrpdr.robot
index f94caf3378..81b0b9a515 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2bdbasemaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2bdbasemaclrn-ndrpdr.robot
@@ -30,8 +30,8 @@
 | ... | with single links between nodes.
 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge-domain.
 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\
-| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with ${nic_name}
-| ... | with VF enabled.\
+| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with ${nic_name}\
+| ... | with VF enabled.
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
index 505f0798a4..701d1e3bfb 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
@@ -31,8 +31,8 @@
 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. IEEE\
 | ... | 802.1Q tagging is applied on link between DUT1 and DUT2.
 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge\
-| ... | domain and MAC learning enabled. DUT1 and DUT2 are tested
-| ... | with ${nic_name}.\
+| ... | domain and MAC learning enabled. DUT1 and DUT2 are tested\
+| ... | with ${nic_name}.
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr.robot
index b582bcaf9e..d8ffffe932 100644
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr.robot
@@ -32,7 +32,7 @@
 | ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4 for L2 switching of IPv4. \
 | ... | IEEE 802.1Q tagging is applied on both links TG-DUT1 .
 | ... | *[Cfg] DUT configuration:* DUT1 is configured with:\
-| ... | 2 VLAN subinterfaces (VID 200 and 300),\
+| ... | 2 VLAN subinterfaces (VID 100 and 200),\
 | ... | 1 L2 BD with the 2 VLAN subinterfaces and a BVI,\
 | ... | 1 GBP L3 RD,\
 | ... | 1 GBP L2 BD with the L2 BD,\
@@ -61,7 +61,7 @@
 | ${nic_name}= | Intel-X710
 | ${overhead}= | ${4}
 # Traffic profile:
-| ${traffic_profile}= | trex-sl-dot1qip4-vlan1ip4src254ip4dst254
+| ${traffic_profile}= | trex-sl-dot1qip4-vlan1ip4src254ip4dst254-bvi
 
 *** Keywords ***
 | Local template
diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-dot1q-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-dot1q-l2bdbasemaclrn-ndrpdr.robot
new file mode 100644
index 0000000000..720d024924
--- /dev/null
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-dot1q-l2bdbasemaclrn-ndrpdr.robot
@@ -0,0 +1,132 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
+| ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | DRV_AVF
+| ...
+| Suite Setup | Setup suite single link | performance_avf
+| Suite Teardown | Tear down suite | performance | vifs
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance
+| ...
+| Test Template | Local template
+| ...
+| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4 for L2 switching of IPv4.\
+| ... | IEEE 802.1Q tagging is applied on both links TG-DUT1 .
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with:\
+| ... | 2 VLAN subinterfaces (VID 100 and 200),\
+| ... | 1 L2 BD with the 2 VLAN subinterfaces,\
+| ... | DUT1 tested with ${nic_name} with VF enabled.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on\
+| ... | links to DUT. TG traffic profile contains two L3 flow-groups\
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
+| ... | containing Ethernet header including IEEE 802.1Q tagging, IPv4 header\
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
+| ${osi_layer}= | L2
+| ${nic_name}= | Intel-X710
+| ${overhead}= | ${4}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-dot1qip4-vlan1ip4src254ip4dst254
+
+*** Keywords ***
+| Local template
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD with VLAN with ${phy_cores} physical core(s) for\
+| | ... | worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add DPDK no PCI to all DUTs
+| | And Set Max Rate And Jumbo
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize AVF interfaces
+| | And Initialize layer interface
+| | And Initialize layer dot1q
+| | And Initialize L2 bridge domain
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-avf-dot1q-l2bdbasemaclrn-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-avf-dot1q-l2bdbasemaclrn-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-avf-dot1q-l2bdbasemaclrn-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-avf-dot1q-l2bdbasemaclrn-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-avf-dot1q-l2bdbasemaclrn-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-avf-dot1q-l2bdbasemaclrn-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc07-9000B-1c-avf-dot1q-l2bdbasemaclrn-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| tc08-9000B-2c-avf-dot1q-l2bdbasemaclrn-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| tc09-9000B-4c-avf-dot1q-l2bdbasemaclrn-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| tc10-IMIX-1c-avf-dot1q-l2bdbasemaclrn-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-avf-dot1q-l2bdbasemaclrn-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-avf-dot1q-l2bdbasemaclrn-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
index 2a54da47a5..59591472c3 100644
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
@@ -28,10 +28,12 @@
 | ...
 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\
 | ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4 for L2 switching of IPv4. \
-| ... | IEEE 802.1Q tagging is applied on link between DUT1-if2 and TG-if2.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT1 is tested with ${nic_name}.\
+| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4 for L2 switching of IPv4.\
+| ... | IEEE 802.1Q tagging is applied on both links TG-DUT1 .
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with:\
+| ... | 2 VLAN subinterfaces (VID 100 and 200),\
+| ... | 1 L2 BD with the 2 VLAN subinterfaces,\
+| ... | DUT1 tested with ${nic_name} with VF enabled.
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
@@ -50,19 +52,14 @@
 | ${osi_layer}= | L2
 | ${nic_name}= | Intel-X710
 | ${overhead}= | ${4}
-| ${subid}= | 10
-| ${tag_rewrite}= | pop-1
-# Bridge domain IDs
-| ${bd_id1}= | 1
-| ${bd_id2}= | 2
 # Traffic profile:
-| ${traffic_profile}= | trex-sl-2n-dot1qip4asym-ip4src254
+| ${traffic_profile}= | trex-sl-dot1qip4-vlan1ip4src254ip4dst254
 
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2BD config with VLAN and uses ${phy_cores}\
-| | ... | physical core(s) for worker threads.
+| | ... | [Cfg] DUT runs L2BD with VLAN with ${phy_cores} physical core(s) for\
+| | ... | worker threads.
 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
 | | ...
 | | ... | *Arguments:*
@@ -79,8 +76,9 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
-| | When Initialize L2 bridge domains with VLAN dot1q sub-interfaces in circular topology
-| | ... | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite}
+| | And Initialize layer interface
+| | And Initialize layer dot1q
+| | And Initialize L2 bridge domain
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***