aboutsummaryrefslogtreecommitdiffstats
path: root/tests
diff options
context:
space:
mode:
authorPeter Mikus <pmikus@cisco.com>2019-08-09 12:46:42 +0000
committerPeter Mikus <pmikus@cisco.com>2019-08-12 14:22:05 +0000
commit9c75b7bf5af74aa13cfa3aeeaf726cd965850fce (patch)
treed32512c64035c47f57d568ba8065790ca0d9029c /tests
parent3e664d4a46aecf847659df2fe3d2572697b582a7 (diff)
Clean: Various libraries
- Remove translate TC as they have no perf opposite - Remove unused keywords - Merge similar keywords / rename - Move keywords from perf library to categories Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I6433006136e2497ad8fb17193aa20c578d836999
Diffstat (limited to 'tests')
-rw-r--r--tests/nsh_sfc/func/classifier/eth2p-ethip4-sfc-classifier-func.robot2
-rw-r--r--tests/nsh_sfc/func/proxy/eth2p-ethip4-nsh-proxy-inbound-func.robot2
-rw-r--r--tests/nsh_sfc/func/proxy/eth2p-ethip4-nsh-proxy-outbound-func.robot2
-rw-r--r--tests/nsh_sfc/func/sff/eth2p-ethip4-sfc-sff-func.robot2
-rw-r--r--tests/vpp/func/l2bd/eth2p-dot1ad--dot1q-l2bdbasemaclrn-vlantrans21-func.robot221
-rw-r--r--tests/vpp/func/l2bd/eth2p-dot1ad-l2bdbasemaclrn-vlantrans22-func.robot405
-rw-r--r--tests/vpp/func/l2xc/eth2p-dot1ad--dot1q-l2xcbase-vlantrans21-func.robot189
-rw-r--r--tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-func.robot3
-rw-r--r--tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-vlantrans22-func.robot346
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot5
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot3
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot3
-rw-r--r--tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot2
52 files changed, 131 insertions, 1249 deletions
diff --git a/tests/nsh_sfc/func/classifier/eth2p-ethip4-sfc-classifier-func.robot b/tests/nsh_sfc/func/classifier/eth2p-ethip4-sfc-classifier-func.robot
index 184715ee01..b922771ea1 100644
--- a/tests/nsh_sfc/func/classifier/eth2p-ethip4-sfc-classifier-func.robot
+++ b/tests/nsh_sfc/func/classifier/eth2p-ethip4-sfc-classifier-func.robot
@@ -26,7 +26,7 @@
| ... | Setup DUT nodes for 'Classifier' functional testing
| Test Setup | Run Keywords | Save VPP PIDs | AND
| ... | Reset PAPI History On All DUTs | ${nodes} | AND
-| ... | Clear interface counters on all vpp nodes in topology | ${nodes}
+| ... | Clear Interface Counters on all DUTs | ${nodes}
| Test Teardown | Run Keywords
| ... | Show packet trace on all DUTs | ${nodes} | AND
| ... | Show PAPI History On All DUTs | ${nodes} | AND
diff --git a/tests/nsh_sfc/func/proxy/eth2p-ethip4-nsh-proxy-inbound-func.robot b/tests/nsh_sfc/func/proxy/eth2p-ethip4-nsh-proxy-inbound-func.robot
index 9733576f4c..518ed2a3fc 100644
--- a/tests/nsh_sfc/func/proxy/eth2p-ethip4-nsh-proxy-inbound-func.robot
+++ b/tests/nsh_sfc/func/proxy/eth2p-ethip4-nsh-proxy-inbound-func.robot
@@ -26,7 +26,7 @@
| ... | Setup DUT nodes for 'Proxy Inbound' functional testing
| Test Setup | Run Keywords | Save VPP PIDs | AND
| ... | Reset PAPI History On All DUTs | ${nodes} | AND
-| ... | Clear interface counters on all vpp nodes in topology | ${nodes}
+| ... | Clear Interface Counters on all DUTs | ${nodes}
| Test Teardown | Run Keywords
| ... | Show packet trace on all DUTs | ${nodes} | AND
| ... | Show PAPI History On All DUTs | ${nodes} | AND
diff --git a/tests/nsh_sfc/func/proxy/eth2p-ethip4-nsh-proxy-outbound-func.robot b/tests/nsh_sfc/func/proxy/eth2p-ethip4-nsh-proxy-outbound-func.robot
index 8bddfc99b5..b228511cad 100644
--- a/tests/nsh_sfc/func/proxy/eth2p-ethip4-nsh-proxy-outbound-func.robot
+++ b/tests/nsh_sfc/func/proxy/eth2p-ethip4-nsh-proxy-outbound-func.robot
@@ -26,7 +26,7 @@
| ... | Setup DUT nodes for 'Proxy Outbound' functional testing
| Test Setup | Run Keywords | Save VPP PIDs | AND
| ... | Reset PAPI History On All DUTs | ${nodes} | AND
-| ... | Clear interface counters on all vpp nodes in topology | ${nodes}
+| ... | Clear Interface Counters on all DUTs | ${nodes}
| Test Teardown | Run Keywords
| ... | Show packet trace on all DUTs | ${nodes} | AND
| ... | Show PAPI History On All DUTs | ${nodes} | AND
diff --git a/tests/nsh_sfc/func/sff/eth2p-ethip4-sfc-sff-func.robot b/tests/nsh_sfc/func/sff/eth2p-ethip4-sfc-sff-func.robot
index 382436a99a..e86c659f8c 100644
--- a/tests/nsh_sfc/func/sff/eth2p-ethip4-sfc-sff-func.robot
+++ b/tests/nsh_sfc/func/sff/eth2p-ethip4-sfc-sff-func.robot
@@ -26,7 +26,7 @@
| ... | Setup DUT nodes for 'SFF' functional testing
| Test Setup | Run Keywords | Save VPP PIDs | AND
| ... | Reset PAPI History On All DUTs | ${nodes} | AND
-| ... | Clear interface counters on all vpp nodes in topology | ${nodes}
+| ... | Clear Interface Counters on all DUTs | ${nodes}
| Test Teardown | Run Keywords
| ... | Show packet trace on all DUTs | ${nodes} | AND
| ... | Show PAPI History On All DUTs | ${nodes} | AND
diff --git a/tests/vpp/func/l2bd/eth2p-dot1ad--dot1q-l2bdbasemaclrn-vlantrans21-func.robot b/tests/vpp/func/l2bd/eth2p-dot1ad--dot1q-l2bdbasemaclrn-vlantrans21-func.robot
deleted file mode 100644
index 38f370ef34..0000000000
--- a/tests/vpp/func/l2bd/eth2p-dot1ad--dot1q-l2bdbasemaclrn-vlantrans21-func.robot
+++ /dev/null
@@ -1,221 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/l2/tagging.robot
-| Resource | resources/libraries/robot/l2/l2_traffic.robot
-| Library | resources.libraries.python.Trace
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV | SKIP_VPP_PATCH
-| Test Setup | Set up functional test
-| Test Teardown | Tear down functional test
-| Documentation | *L2BD with VLAN tag rewrite test cases - transalte-2-1*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet encapsulations:* Eth-dot1ad-IPv4-ICMPv4 or
-| ... | Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, Eth-dot1q-IPv4-ICMPv4 or
-| ... | Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv4-ICMPv4 or Eth-IPv6-ICMPv6
-| ... | on TG-DUT2 for L2 switching of IPv4/IPv6.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with bridge domain (L2BD)
-| ... | switching combined with MAC learning enabled and added VLAN
-| ... | sub-interface with VLAN tag rewrite translate-2-1 method of interface
-| ... | towards TG and interface towards DUT2. DUT2 is configured with L2
-| ... | bridge domain (L2BD) switching between VLAN sub-interface with VLAN tag
-| ... | rewrite pop-1 method of interface towards DUT1 and interface towards TG.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are
-| ... | sent from TG on link to DUT1 and received in TG on link form DUT2;
-| ... | on receive TG verifies packets for correctness and their IPv4 src-addr,
-| ... | dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q, IEEE 802.1ad.
-
-*** Variables ***
-| ${bd_id1}= | 1
-
-| ${subid}= | 10
-
-| ${outer_vlan_id1}= | 110
-| ${outer_vlan_id2}= | 120
-| ${outer_vlan_wrong}= | 150
-
-| ${inner_vlan_id1}= | 210
-
-| ${src_ip6}= | 3ffe:63::1
-| ${dst_ip6}= | 3ffe:63::2
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 with L2BD and VLAN translate-2-1 (DUT1) switch ICMPv4 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1, \
-| | ... | Eth-dot1q-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2.
-| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to
-| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite
-| | ... | translate-2-1 method; on DUT2 configure L2 bridge domain (L2BD) with
-| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with
-| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv4 Echo Req
-| | ... | tagged with Dot1ad tags from one of its interfaces to another one
-| | ... | via DUT1 and DUT2; verify that packet is received.
-| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2}
-| | And Configure L2 tag rewrite method on interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_id2}
-| | And Configure L2 tag rewrite method on interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-1
-| | And Create bridge domain | ${dut1_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index}
-| | ... | ${bd_id1}
-| | And Create bridge domain | ${dut2_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index}
-| | ... | ${bd_id1}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1ad
-| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1}
-
-| TC02: DUT1 and DUT2 with L2BD and VLAN translate-2-1 with wrong tag used (DUT1) switch ICMPv4 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1, \
-| | ... | Eth-dot1q-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2.
-| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to
-| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite
-| | ... | translate-2-1 method to set tag different from tag set on VLAN
-| | ... | sub-interface of DUT2; on DUT2 configure L2 bridge domain (L2BD) with
-| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with
-| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv4 Echo Req
-| | ... | tagged with Dot1ad tags from one of its interfaces to another one
-| | ... | via DUT1 and DUT2; verify that packet is not received.
-| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
-| | [Tags] | SKIP_PATCH
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2}
-| | And Configure L2 tag rewrite method on interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_wrong}
-| | And Configure L2 tag rewrite method on interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-1
-| | And Create bridge domain | ${dut1_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index}
-| | ... | ${bd_id1}
-| | And Create bridge domain | ${dut2_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index}
-| | ... | ${bd_id1}
-| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1}
-| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1}
-| | ... | vlan2=${inner_vlan_id1}
-
-
-| TC03: DUT1 and DUT2 with L2BD and VLAN translate-2-1 (DUT1) switch ICMPv6 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, \
-| | ... | Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2.
-| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to
-| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite
-| | ... | translate-2-1 method; on DUT2 configure L2 bridge domain (L2BD) with
-| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with
-| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv6 Echo Req
-| | ... | tagged with Dot1ad tags from one of its interfaces to another one
-| | ... | via DUT1 and DUT2; verify that packet is received.
-| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2}
-| | And Configure L2 tag rewrite method on interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_id2}
-| | And Configure L2 tag rewrite method on interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-1
-| | And Create bridge domain | ${dut1_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index}
-| | ... | ${bd_id1}
-| | And Create bridge domain | ${dut2_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index}
-| | ... | ${bd_id1}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip6}
-| | ... | dst_ip=${dst_ip6} | encaps=Dot1ad | vlan1=${outer_vlan_id1}
-| | ... | vlan2=${inner_vlan_id1}
-
-| TC04: DUT1 and DUT2 with L2BD and VLAN translate-2-1 with wrong tag used (DUT1) switch ICMPv6 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, \
-| | ... | Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2.
-| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to
-| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite
-| | ... | translate-2-1 method to set tag different from tag set on VLAN
-| | ... | sub-interface of DUT2; on DUT2 configure L2 bridge domain (L2BD) with
-| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with
-| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv6 Echo Req
-| | ... | tagged with Dot1ad tags from one of its interfaces to another one
-| | ... | via DUT1 and DUT2; verify that packet is not received.
-| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
-| | [Tags] | SKIP_PATCH
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2}
-| | And Configure L2 tag rewrite method on interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_wrong}
-| | And Configure L2 tag rewrite method on interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-1
-| | And Create bridge domain | ${dut1_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index}
-| | ... | ${bd_id1}
-| | And Create bridge domain | ${dut2_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index}
-| | ... | ${bd_id1}
-| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1}
-| | ... | ${tg_to_dut2} | src_ip=${src_ip6} | dst_ip=${dst_ip6} | encaps=Dot1ad
-| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1}
diff --git a/tests/vpp/func/l2bd/eth2p-dot1ad-l2bdbasemaclrn-vlantrans22-func.robot b/tests/vpp/func/l2bd/eth2p-dot1ad-l2bdbasemaclrn-vlantrans22-func.robot
deleted file mode 100644
index 06a4794086..0000000000
--- a/tests/vpp/func/l2bd/eth2p-dot1ad-l2bdbasemaclrn-vlantrans22-func.robot
+++ /dev/null
@@ -1,405 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/l2/tagging.robot
-| Resource | resources/libraries/robot/l2/l2_traffic.robot
-| Library | resources.libraries.python.Trace
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV | SKIP_VPP_PATCH
-| Test Setup | Set up functional test
-| Test Teardown | Tear down functional test
-| Documentation | *L2BD with VLAN tag rewrite test cases - translate-2-2*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet encapsulations:* Eth-dot1ad-IPv4-ICMPv4 or
-| ... | Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and DUT1-DUT2, Eth-IPv4-ICMPv4 or
-| ... | Eth-IPv6-ICMPv6 on TG-DUT2 for L2 switching of IPv4/IPv6.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with bridge domain (L2BD)
-| ... | switching combined with MAC learning enabled and added VLAN
-| ... | sub-interface with VLAN tag rewrite translate-2-2 method of interface
-| ... | towards TG and interface towards DUT2. DUT2 is configured with L2
-| ... | bridge domain (L2BD) switching between VLAN sub-interface with VLAN tag
-| ... | rewrite pop-2 method of interface towards DUT1 and interface towards TG.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are
-| ... | sent from TG on link to DUT1 and received in TG on link form DUT2;
-| ... | on receive TG verifies packets for correctness and their IPv4 src-addr,
-| ... | dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q, IEEE 802.1ad.
-
-*** Variables ***
-| ${bd_id1}= | 1
-
-| ${subid}= | 10
-
-| ${outer_vlan_id1}= | 110
-| ${outer_vlan_id2}= | 120
-| ${outer_vlan_wrong}= | 150
-
-| ${inner_vlan_id1}= | 210
-| ${inner_vlan_id2}= | 220
-| ${inner_vlan_wrong}= | 250
-
-| ${src_ip6}= | 3ffe:63::1
-| ${dst_ip6}= | 3ffe:63::2
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 with L2BD and VLAN translate-2-2 switch ICMPv4 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \
-| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2
-| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad
-| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method;
-| | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG and
-| | ... | one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-2
-| | ... | tagged with Dot1ad tags from one of its interfaces to another one
-| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify
-| | ... | that packet is received. [Ref] IEEE 802.1ad
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
-| | ... | type_subif=two_tags dot1ad
-| | And Configure L2 tag rewrite method on interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False}
-| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2}
-| | And Configure L2 tag rewrite method on interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-2
-| | And Create bridge domain | ${dut1_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index}
-| | ... | ${bd_id1}
-| | And Create bridge domain | ${dut2_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index}
-| | ... | ${bd_id1}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1ad
-| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1}
-
-| TC02: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong inner tag used (DUT1) switch ICMPv4 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \
-| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2
-| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad
-| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to
-| | ... | set inner tag different from inner tag set on Dot1ad sub-interface of
-| | ... | DUT2; on DUT2 configure L2 bridge domain (L2BD) with one interface to
-| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite
-| | ... | pop-2 tagged with Dot1ad tags from one of its interfaces to another
-| | ... | one method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2;
-| | ... | verify that packet is not received. [Ref] IEEE 802.1ad
-| | [Tags] | SKIP_PATCH
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
-| | ... | type_subif=two_tags dot1ad
-| | And Configure L2 tag rewrite method on interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False}
-| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong}
-| | And Configure L2 tag rewrite method on interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-2
-| | And Create bridge domain | ${dut1_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index}
-| | ... | ${bd_id1}
-| | And Create bridge domain | ${dut2_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index}
-| | ... | ${bd_id1}
-| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1}
-| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1}
-| | ... | vlan2=${inner_vlan_id1}
-
-| TC03: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong outer tag used (DUT1) switch ICMPv4 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \
-| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2
-| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad
-| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to
-| | ... | set outer tag different from outer tag set on Dot1ad sub-interface of
-| | ... | DUT2; on DUT2 configure L2 bridge domain (L2BD) with one interface to
-| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite
-| | ... | pop-2 tagged with Dot1ad tags from one of its interfaces to another
-| | ... | one method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2;
-| | ... | verify that packet is not received. [Ref] IEEE 802.1ad
-| | [Tags] | SKIP_PATCH
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
-| | ... | type_subif=two_tags dot1ad
-| | And Configure L2 tag rewrite method on interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False}
-| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2}
-| | And Configure L2 tag rewrite method on interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-2
-| | And Create bridge domain | ${dut1_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index}
-| | ... | ${bd_id1}
-| | And Create bridge domain | ${dut2_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index}
-| | ... | ${bd_id1}
-| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1}
-| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1}
-| | ... | vlan2=${inner_vlan_id1}
-
-| TC04: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong outer and inner tags used (DUT1) switch ICMPv4 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \
-| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2
-| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad
-| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to
-| | ... | set tags different from tags set on Dot1ad sub-interface of DUT2;
-| | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG
-| | ... | and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-2
-| | ... | tagged with Dot1ad tags from one of its interfaces to another one
-| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify
-| | ... | that packet is not received. [Ref] IEEE 802.1ad
-| | [Tags] | SKIP_PATCH
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
-| | ... | type_subif=two_tags dot1ad
-| | And Configure L2 tag rewrite method on interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False}
-| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong}
-| | And Configure L2 tag rewrite method on interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-2
-| | And Create bridge domain | ${dut1_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index}
-| | ... | ${bd_id1}
-| | And Create bridge domain | ${dut2_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index}
-| | ... | ${bd_id1}
-| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1}
-| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1}
-| | ... | vlan2=${inner_vlan_id1}
-
-| TC05: DUT1 and DUT2 with L2BD and VLAN translate-2-2 switch ICMPv6 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \
-| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2
-| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad
-| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method;
-| | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG and
-| | ... | one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1
-| | ... | tagged with Dot1ad tags from one of its interfaces to another one
-| | ... | method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; verify
-| | ... | that packet is received. [Ref] IEEE 802.1ad
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
-| | ... | type_subif=two_tags dot1ad
-| | And Configure L2 tag rewrite method on interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False}
-| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2}
-| | And Configure L2 tag rewrite method on interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-2
-| | And Create bridge domain | ${dut1_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index}
-| | ... | ${bd_id1}
-| | And Create bridge domain | ${dut2_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index}
-| | ... | ${bd_id1}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip6}
-| | ... | dst_ip=${dst_ip6} | encaps=Dot1ad | vlan1=${outer_vlan_id1}
-| | ... | vlan2=${inner_vlan_id1}
-
-| TC06: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong inner tag used (DUT1) switch ICMPv6 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \
-| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2
-| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad
-| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to
-| | ... | set inner tag different from inner tag set on Dot1ad sub-interface of
-| | ... | DUT2; on DUT2 configure L2 bridge domain (L2BD) with one interface to
-| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite
-| | ... | pop-1 tagged with Dot1ad tags from one of its interfaces to another
-| | ... | one method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2;
-| | ... | verify that packet is not received. [Ref] IEEE 802.1ad
-| | [Tags] | SKIP_PATCH
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
-| | ... | type_subif=two_tags dot1ad
-| | And Configure L2 tag rewrite method on interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False}
-| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong}
-| | And Configure L2 tag rewrite method on interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-2
-| | And Create bridge domain | ${dut1_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index}
-| | ... | ${bd_id1}
-| | And Create bridge domain | ${dut2_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index}
-| | ... | ${bd_id1}
-| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1}
-| | ... | ${tg_to_dut2} | src_ip=${src_ip6} | dst_ip=${dst_ip6} | encaps=Dot1ad
-| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1}
-
-| TC07: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong outer tag used (DUT1) switch ICMPv6 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \
-| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2
-| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad
-| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to
-| | ... | set outer tag different from outer tag set on Dot1ad sub-interface of
-| | ... | DUT2; on DUT2 configure L2 bridge domain (L2BD) with one interface to
-| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite
-| | ... | pop-1 tagged with Dot1ad tags from one of its interfaces to another
-| | ... | one method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2;
-| | ... | verify that packet is not received. [Ref] IEEE 802.1ad
-| | [Tags] | SKIP_PATCH
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
-| | ... | type_subif=two_tags dot1ad
-| | And Configure L2 tag rewrite method on interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False}
-| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2}
-| | And Configure L2 tag rewrite method on interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-2
-| | And Create bridge domain | ${dut1_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index}
-| | ... | ${bd_id1}
-| | And Create bridge domain | ${dut2_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index}
-| | ... | ${bd_id1}
-| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1}
-| | ... | ${tg_to_dut2} | src_ip=${src_ip6} | dst_ip=${dst_ip6} | encaps=Dot1ad
-| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1}
-
-| TC08: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong outer and inner tags used (DUT1) switch ICMPv6 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \
-| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2
-| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad
-| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to
-| | ... | set tags different from tags set on Dot1ad sub-interface of DUT2;
-| | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG
-| | ... | and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1
-| | ... | tagged with Dot1ad tags from one of its interfaces to another one
-| | ... | method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; verify
-| | ... | that packet is not received. [Ref] IEEE 802.1ad
-| | [Tags] | SKIP_PATCH
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
-| | ... | type_subif=two_tags dot1ad
-| | And Configure L2 tag rewrite method on interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False}
-| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong}
-| | And Configure L2 tag rewrite method on interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-2
-| | And Create bridge domain | ${dut1_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index}
-| | ... | ${bd_id1}
-| | And Create bridge domain | ${dut2_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index}
-| | ... | ${bd_id1}
-| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1}
-| | ... | ${tg_to_dut2} | src_ip=${src_ip6} | dst_ip=${dst_ip6} | encaps=Dot1ad
-| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1}
diff --git a/tests/vpp/func/l2xc/eth2p-dot1ad--dot1q-l2xcbase-vlantrans21-func.robot b/tests/vpp/func/l2xc/eth2p-dot1ad--dot1q-l2xcbase-vlantrans21-func.robot
deleted file mode 100644
index c0e8c5c899..0000000000
--- a/tests/vpp/func/l2xc/eth2p-dot1ad--dot1q-l2xcbase-vlantrans21-func.robot
+++ /dev/null
@@ -1,189 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/l2/tagging.robot
-| Resource | resources/libraries/robot/l2/l2_traffic.robot
-| Library | resources.libraries.python.Trace
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV | SKIP_VPP_PATCH
-| Test Setup | Set up functional test
-| Test Teardown | Tear down functional test
-| Documentation | *L2XC with VLAN tag rewrite test cases - translate-2-1*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet encapsulations:* Eth-dot1ad-IPv4-ICMPv4 or
-| ... | Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, Eth-dot1q-IPv4-ICMPv4 or
-| ... | Eth-dot1aq-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2
-| ... | for L2 switching of IPv4/IPv6.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect
-| ... | (L2XC) switching between VLAN sub-interface with VLAN tag rewrite
-| ... | translate-2-1 method of interface towards TG and interface towards DUT2.
-| ... | DUT2 is configured configured with L2 cross-connect (L2XC) switching
-| ... | between VLAN sub-interface with VLAN tag rewrite pop-1 method
-| ... | of interface towards DUT1 and interface towards TG.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are
-| ... | sent from TG on link to DUT1 and received in TG on link form DUT2;
-| ... | on receive TG verifies packets for correctness and their IPv4 src-addr,
-| ... | dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q, IEEE 802.1ad.
-
-*** Variables ***
-| ${subid}= | 10
-
-| ${outer_vlan_id1}= | 110
-| ${outer_vlan_id2}= | 120
-| ${outer_vlan_wrong}= | 150
-
-| ${inner_vlan_id1}= | 210
-
-| ${src_ip}= | 3ffe:63::1
-| ${dst_ip}= | 3ffe:63::2
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 with L2XC and VLAN translate-2-1 (DUT1) switch ICMPv4 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1, \
-| | ... | Eth-dot1q-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2.
-| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to
-| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite
-| | ... | translate-2-1 method; on DUT2 configure L2 cross-connect (L2XC) with
-| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with
-| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv4 Echo Req
-| | ... | tagged with Dot1ad tags from one of its interfaces to another one
-| | ... | via DUT1 and DUT2; verify that packet is received.
-| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2}
-| | And Configure L2 tag rewrite method on interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_id2}
-| | And Configure L2 tag rewrite method on interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-1
-| | And Connect interfaces and VLAN sub-interfaces using L2XC
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1ad
-| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1}
-
-| TC02: DUT1 and DUT2 with L2XC and VLAN translate-2-1 with wrong tag used (DUT1) switch ICMPv4 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1, \
-| | ... | Eth-dot1q-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2.
-| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to
-| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite
-| | ... | translate-2-1 method to set tag different from tag set on VLAN
-| | ... | sub-interface of DUT2; on DUT2 configure L2 cross-connect (L2XC) with
-| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with
-| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv4 Echo Req
-| | ... | tagged with Dot1ad tags from one of its interfaces to another one
-| | ... | via DUT1 and DUT2; verify that packet is not received.
-| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
-| | [Tags] | SKIP_PATCH
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2}
-| | And Configure L2 tag rewrite method on interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_wrong}
-| | And Configure L2 tag rewrite method on interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-1
-| | And Connect interfaces and VLAN sub-interfaces using L2XC
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
-| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1}
-| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1}
-| | ... | vlan2=${inner_vlan_id1}
-
-| TC03: DUT1 and DUT2 with L2XC and VLAN translate-2-1 (DUT1) switch ICMPv6 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, \
-| | ... | Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2.
-| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to
-| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite
-| | ... | translate-2-1 method; on DUT2 configure L2 cross-connect (L2XC) with
-| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with
-| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv6 Echo Req
-| | ... | tagegd with Dot1ad tags from one of its interfaces to another one
-| | ... | via DUT1 and DUT2; verify that packet is received.
-| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2}
-| | And Configure L2 tag rewrite method on interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_id2}
-| | And Configure L2 tag rewrite method on interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-1
-| | And Connect interfaces and VLAN sub-interfaces using L2XC
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip}
-| | ... | dst_ip=${dst_ip} | encaps=Dot1ad | vlan1=${outer_vlan_id1}
-| | ... | vlan2=${inner_vlan_id1}
-
-| TC04: DUT1 and DUT2 with L2XC and VLAN translate-2-1 with wrong tag used (DUT1) switch ICMPv6 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, \
-| | ... | Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2.
-| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to
-| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite
-| | ... | translate-2-1 method to set tag different from tag set on VLAN
-| | ... | sub-interface of DUT2; on DUT2 configure L2 cross-connect (L2XC) with
-| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with
-| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv6 Echo Req
-| | ... | tagegd with Dot1ad tags from one of its interfaces to another one
-| | ... | via DUT1 and DUT2; verify that packet is not received.
-| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
-| | [Tags] | SKIP_PATCH
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2}
-| | And Configure L2 tag rewrite method on interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_wrong}
-| | And Configure L2 tag rewrite method on interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-1
-| | And Connect interfaces and VLAN sub-interfaces using L2XC
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
-| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1}
-| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad
-| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1}
diff --git a/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-func.robot b/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-func.robot
index f030e618f7..e3f0571047 100644
--- a/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-func.robot
+++ b/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-func.robot
@@ -62,8 +62,9 @@
| | And Configure L2 tag rewrite method on interfaces
| | ... | ${dut1_node} | ${subif_index_1} | ${dut2_node} | ${subif_index_2}
| | ... | ${tag_rewrite_method}
-| | And Connect interfaces and VLAN sub-interfaces using L2XC
+| | And Configure L2XC
| | ... | ${dut1_node} | ${dut1_to_tg} | ${subif_index_1}
+| | And Configure L2XC
| | ... | ${dut2_node} | ${dut2_to_tg} | ${subif_index_2}
| | Then Send ICMP packet and verify received packet
| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
diff --git a/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-vlantrans22-func.robot b/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-vlantrans22-func.robot
deleted file mode 100644
index 14406da97f..0000000000
--- a/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-vlantrans22-func.robot
+++ /dev/null
@@ -1,346 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/l2/tagging.robot
-| Resource | resources/libraries/robot/l2/l2_traffic.robot
-| Library | resources.libraries.python.Trace
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV | SKIP_VPP_PATCH
-| Test Setup | Set up functional test
-| Test Teardown | Tear down functional test
-| Documentation | *L2XC with VLAN tag rewrite test cases - translate-2-2*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet encapsulations:* Eth-dot1ad-IPv4-ICMPv4 or
-| ... | Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and DUT1-DUT2, Eth-IPv4-ICMPv4 or
-| ... | Eth-IPv6-ICMPv6 on TG-DUT2 for L2 switching of IPv4/IPv6.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect
-| ... | (L2XC) switching between VLAN sub-interface with VLAN tag rewrite
-| ... | translate-2-2 method of interface towards TG and interface towards DUT2.
-| ... | DUT2 is configured configured with L2 cross-connect (L2XC) switching
-| ... | between VLAN sub-interface with VLAN tag rewrite pop-2 method
-| ... | of interface towards DUT1 and interface towards TG.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are
-| ... | sent from TG on link to DUT1 and received in TG on link form DUT2;
-| ... | on receive TG verifies packets for correctness and their IPv4 src-addr,
-| ... | dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q, IEEE 802.1ad.
-
-*** Variables ***
-| ${subid}= | 10
-
-| ${outer_vlan_id1}= | 110
-| ${outer_vlan_id2}= | 120
-| ${outer_vlan_wrong}= | 150
-
-| ${inner_vlan_id1}= | 210
-| ${inner_vlan_id2}= | 220
-| ${inner_vlan_wrong}= | 250
-
-| ${src_ip}= | 3ffe:63::1
-| ${dst_ip}= | 3ffe:63::2
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 with L2XC and VLAN translate-2-2 switch ICMPv4 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \
-| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2
-| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad
-| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method;
-| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG and
-| | ... | one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1
-| | ... | tagged with Dot1ad tags from one of its interfaces to another one
-| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify
-| | ... | that packet is received. [Ref] IEEE 802.1ad
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
-| | ... | type_subif=two_tags dot1ad
-| | And Configure L2 tag rewrite method on interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False}
-| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2}
-| | And Configure L2 tag rewrite method on interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-2
-| | And Connect interfaces and VLAN sub-interfaces using L2XC
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1ad
-| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1}
-
-| TC02: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong inner tag used (DUT1) switch ICMPv4 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \
-| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2
-| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad
-| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to
-| | ... | set inner tag different from inner tag set on Dot1ad sub-interface of
-| | ... | DUT2; on DUT2 configure L2 cross-connect (L2XC) with one interface to
-| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite
-| | ... | pop-1 tagged with Dot1ad tags from one of its interfaces to another one
-| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify
-| | ... | that packet is not received. [Ref] IEEE 802.1ad
-| | [Tags] | SKIP_PATCH
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
-| | ... | type_subif=two_tags dot1ad
-| | And Configure L2 tag rewrite method on interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False}
-| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong}
-| | And Configure L2 tag rewrite method on interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-2
-| | And Connect interfaces and VLAN sub-interfaces using L2XC
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
-| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1}
-| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1}
-| | ... | vlan2=${inner_vlan_id1}
-
-| TC03: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong outer tag used (DUT1) switch ICMPv4 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \
-| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2
-| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad
-| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to
-| | ... | set outer tag different from outer tag set on Dot1ad sub-interface of
-| | ... | DUT2; on DUT2 configure L2 cross-connect (L2XC) with one interface to
-| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite
-| | ... | pop-1 tagged with Dot1ad tags from one of its interfaces to another
-| | ... | one method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2;
-| | ... | verify that packet is not received. [Ref] IEEE 802.1ad
-| | [Tags] | SKIP_PATCH
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
-| | ... | type_subif=two_tags dot1ad
-| | And Configure L2 tag rewrite method on interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False}
-| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2}
-| | And Configure L2 tag rewrite method on interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-2
-| | And Connect interfaces and VLAN sub-interfaces using L2XC
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
-| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1}
-| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1}
-| | ... | vlan2=${inner_vlan_id1}
-
-| TC04: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong outer and inner tags used (DUT1) switch ICMPv4 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \
-| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2
-| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad
-| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to
-| | ... | set tags different from tags set on Dot1ad sub-interface of DUT2;
-| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG
-| | ... | and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1
-| | ... | tagged with Dot1ad tags from one of its interfaces to another one
-| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify
-| | ... | that packet is not received. [Ref] IEEE 802.1ad
-| | [Tags] | SKIP_PATCH
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
-| | ... | type_subif=two_tags dot1ad
-| | And Configure L2 tag rewrite method on interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False}
-| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong}
-| | And Configure L2 tag rewrite method on interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-2
-| | And Connect interfaces and VLAN sub-interfaces using L2XC
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
-| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1}
-| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1}
-| | ... | vlan2=${inner_vlan_id1}
-
-| TC05: DUT1 and DUT2 with L2XC and VLAN translate-2-2 switch ICMPv6 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \
-| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2
-| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad
-| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method;
-| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG and
-| | ... | one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1
-| | ... | tagegd with Dot1ad tags from one of its interfaces to another one
-| | ... | method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; verify
-| | ... | that packet is received. [Ref] IEEE 802.1ad
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
-| | ... | type_subif=two_tags dot1ad
-| | And Configure L2 tag rewrite method on interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False}
-| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2}
-| | And Configure L2 tag rewrite method on interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-2
-| | And Connect interfaces and VLAN sub-interfaces using L2XC
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip}
-| | ... | dst_ip=${dst_ip} | encaps=Dot1ad | vlan1=${outer_vlan_id1}
-| | ... | vlan2=${inner_vlan_id1}
-
-| TC06: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong inner tag used (DUT1) switch ICMPv6 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \
-| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2
-| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad
-| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to
-| | ... | set inner tag different from inner tag set on Dot1ad sub-interface of
-| | ... | DUT2; on DUT2 configure L2 cross-connect (L2XC) with one interface to
-| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite
-| | ... | pop-1 tagegd with Dot1ad tags from one of its interfaces to another one
-| | ... | method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; verify
-| | ... | that packet is not received. [Ref] IEEE 802.1ad
-| | [Tags] | SKIP_PATCH
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
-| | ... | type_subif=two_tags dot1ad
-| | And Configure L2 tag rewrite method on interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False}
-| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong}
-| | And Configure L2 tag rewrite method on interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-2
-| | And Connect interfaces and VLAN sub-interfaces using L2XC
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
-| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1}
-| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad
-| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1}
-
-| TC07: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong outer tag used (DUT1) switch ICMPv6 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \
-| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2
-| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad
-| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to
-| | ... | set outer tag different from outer tag set on Dot1ad sub-interface of
-| | ... | DUT2; on DUT2 configure L2 cross-connect (L2XC) with one interface to
-| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite
-| | ... | pop-1 tagegd with Dot1ad tags from one of its interfaces to another
-| | ... | one method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2;
-| | ... | verify that packet is not received. [Ref] IEEE 802.1ad
-| | [Tags] | SKIP_PATCH
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
-| | ... | type_subif=two_tags dot1ad
-| | And Configure L2 tag rewrite method on interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False}
-| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2}
-| | And Configure L2 tag rewrite method on interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-2
-| | And Connect interfaces and VLAN sub-interfaces using L2XC
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
-| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1}
-| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad
-| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1}
-
-| TC08: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong outer and inner tags used (DUT1) switch ICMPv6 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \
-| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2
-| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad
-| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to
-| | ... | set tags different from tags set on Dot1ad sub-interface of DUT2;
-| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG
-| | ... | and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1
-| | ... | tagegd with Dot1ad tags from one of its interfaces to another one
-| | ... | method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; verify
-| | ... | that packet is not received. [Ref] IEEE 802.1ad
-| | [Tags] | SKIP_PATCH
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
-| | ... | type_subif=two_tags dot1ad
-| | And Configure L2 tag rewrite method on interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False}
-| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong}
-| | And Configure L2 tag rewrite method on interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-2
-| | And Connect interfaces and VLAN sub-interfaces using L2XC
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
-| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1}
-| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad
-| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1}
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot
index 71419b5df9..381c09cb27 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | input
| ${no_hit_aces_number}= | 10
| ${flows_per_dir}= | 100
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot
index 3fa03d1c30..0c8aaa0988 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | input
| ${no_hit_aces_number}= | 10
| ${flows_per_dir}= | 100k
+| ${ip_nr}= | ${100}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 100
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot
index 61673c6dcf..08ca48e24b 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | input
| ${no_hit_aces_number}= | 10
| ${flows_per_dir}= | 10k
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot
index 261d1718c6..8d9769bba3 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | input
| ${no_hit_aces_number}= | 10
| ${flows_per_dir}= | 100
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot
index 0869a58cc8..e869784249 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | input
| ${no_hit_aces_number}= | 10
| ${flows_per_dir}= | 100k
+| ${ip_nr}= | ${100}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 100
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot
index d52f9d8c00..f156c1e276 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | input
| ${no_hit_aces_number}= | 10
| ${flows_per_dir}= | 10k
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot
index 642c802661..f59dc58550 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | input
| ${no_hit_aces_number}= | 1
| ${flows_per_dir}= | 100
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot
index fc201e761c..166a57d097 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | input
| ${no_hit_aces_number}= | 1
| ${flows_per_dir}= | 100k
+| ${ip_nr}= | ${100}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 100
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot
index cecf7338ac..d37416efa4 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | input
| ${no_hit_aces_number}= | 1
| ${flows_per_dir}= | 10k
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -89,8 +90,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot
index 049b649d03..aca0b05668 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | input
| ${no_hit_aces_number}= | 1
| ${flows_per_dir}= | 100
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot
index ae2cb58b77..b5ddf3deed 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot
@@ -51,6 +51,7 @@
| ${osi_layer}= | L3
| ${nic_name}= | Intel-X710
| ${overhead}= | ${0}
+| ${ip_nr}= | ${100}
# ACL test setup
| ${acl_action}= | permit
| ${acl_apply_type}= | input
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 100
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot
index c8fdba2eb8..845868661c 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | input
| ${no_hit_aces_number}= | 1
| ${flows_per_dir}= | 10k
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -89,8 +90,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot
index 78d7679aaa..2682a4c0ae 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | input
| ${no_hit_aces_number}= | 50
| ${flows_per_dir}= | 100
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot
index 43cf6b4a29..3af4c48a66 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | input
| ${no_hit_aces_number}= | 50
| ${flows_per_dir}= | 100k
+| ${ip_nr}= | ${100}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 100
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot
index cf8a757ec7..c5b92b7f0b 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | input
| ${no_hit_aces_number}= | 50
| ${flows_per_dir}= | 10k
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -89,8 +90,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot
index b1be819909..7db631aa65 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | input
| ${no_hit_aces_number}= | 50
| ${flows_per_dir}= | 100
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot
index 3fed11a167..13e0c69395 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | input
| ${no_hit_aces_number}= | 50
| ${flows_per_dir}= | 100k
+| ${ip_nr}= | ${100}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 100
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot
index 2b457766d6..0d25ee22b0 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | input
| ${no_hit_aces_number}= | 50
| ${flows_per_dir}= | 10k
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -89,8 +90,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot
index 6e43a21612..5726c02ec2 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | output
| ${no_hit_aces_number}= | 10
| ${flows_per_dir}= | 100
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot
index 7a902bc9d2..bc806f3ce4 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | output
| ${no_hit_aces_number}= | 10
| ${flows_per_dir}= | 100k
+| ${ip_nr}= | ${100}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 100
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot
index 56bad45cd2..36eeeafa07 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | output
| ${no_hit_aces_number}= | 10
| ${flows_per_dir}= | 10k
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot
index 1b11aeb52a..6291183cdc 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | output
| ${no_hit_aces_number}= | 10
| ${flows_per_dir}= | 100
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot
index c971f7f362..87129b5593 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | output
| ${no_hit_aces_number}= | 10
| ${flows_per_dir}= | 100k
+| ${ip_nr}= | ${100}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 100
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot
index e4418146d8..00a69a03bf 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | output
| ${no_hit_aces_number}= | 10
| ${flows_per_dir}= | 10k
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot
index 5f23e46b96..148c8375e4 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | output
| ${no_hit_aces_number}= | 1
| ${flows_per_dir}= | 100
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot
index 1f41774a60..083c09bcc3 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | output
| ${no_hit_aces_number}= | 1
| ${flows_per_dir}= | 100k
+| ${ip_nr}= | ${100}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 100
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot
index 3c1287e9b5..0a97cd8035 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | output
| ${no_hit_aces_number}= | 1
| ${flows_per_dir}= | 10k
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot
index 24087530ca..be06969aac 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | output
| ${no_hit_aces_number}= | 1
| ${flows_per_dir}= | 100
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot
index b9d5ed18eb..7c87cb3f5e 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | output
| ${no_hit_aces_number}= | 1
| ${flows_per_dir}= | 100k
+| ${ip_nr}= | ${100}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 100
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot
index a3aa66e59e..e41be6d6d2 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | output
| ${no_hit_aces_number}= | 1
| ${flows_per_dir}= | 10k
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot
index c1a61b7488..4bf8704ac8 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | output
| ${no_hit_aces_number}= | 50
| ${flows_per_dir}= | 100
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot
index fa2e15f8aa..8442f765e6 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | output
| ${no_hit_aces_number}= | 50
| ${flows_per_dir}= | 100k
+| ${ip_nr}= | ${100}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 100
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot
index 809fb624eb..5254073bb3 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | output
| ${no_hit_aces_number}= | 50
| ${flows_per_dir}= | 10k
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot
index 18f4b1e5e7..22a8d34304 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | output
| ${no_hit_aces_number}= | 50
| ${flows_per_dir}= | 100
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot
index 72f61ffac7..2eefcd82ea 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | output
| ${no_hit_aces_number}= | 50
| ${flows_per_dir}= | 100k
+| ${ip_nr}= | ${100}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 100
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot
index 5eecf988a8..d1fb20f411 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot
@@ -56,6 +56,7 @@
| ${acl_apply_type}= | output
| ${no_hit_aces_number}= | 50
| ${flows_per_dir}= | 10k
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot
index 37d3e5f5f2..33c88699e4 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot
@@ -55,6 +55,7 @@
| ${acl_apply_type}= | input
| ${no_hit_aces_number}= | 1
| ${flows_per_dir}= | 10k
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot
index 56dd8f985f..283f5beb24 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot
@@ -55,6 +55,7 @@
| ${acl_apply_type}= | input
| ${no_hit_aces_number}= | 1
| ${flows_per_dir}= | 10k
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot
index d7f28986ed..51653232cb 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot
@@ -55,6 +55,7 @@
| ${acl_apply_type}= | input
| ${no_hit_aces_number}= | 50
| ${flows_per_dir}= | 10k
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot
index ef1cac7fd0..08c3b5429c 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot
@@ -55,6 +55,7 @@
| ${acl_apply_type}= | input
| ${no_hit_aces_number}= | 50
| ${flows_per_dir}= | 10k
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
@@ -88,8 +89,8 @@
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot
index 29d3114fc1..e3dba2f5e8 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot
@@ -88,8 +88,9 @@
| | And Configure L2 tag rewrite method on interfaces
| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2}
| | ... | ${tag_rewrite}
-| | And Connect interfaces and VLAN sub-interfaces using L2XC
+| | And Configure L2XC
| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
+| | And Configure L2XC
| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot
index a4a9ef9a29..8e06a53e23 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot
@@ -82,8 +82,9 @@
| | And Configure L2 tag rewrite method on interfaces
| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2}
| | ... | ${tag_rewrite}
-| | And Connect interfaces and VLAN sub-interfaces using L2XC
+| | And Configure L2XC
| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
+| | And Configure L2XC
| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot
index 079cd59cb4..f1c3b9a034 100644
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot
@@ -81,7 +81,7 @@
| | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid}
| | And Configure L2 tag rewrite method on interfaces
| | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite}
-| | And Connect interfaces and VLAN sub-interfaces using L2XC
+| | And Configure L2XC
| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
| | Then Find NDR and PDR intervals using optimized search