Add Honeycomb sub-interface and VLAN tests

JIRA: CSIT-94
JIRA: CSIT-48

- add Honeycomb sub-interface tests
- add Honeycomb VLAN tests
- add keywords for sub-interface tests
- add keywords for VLAN tests

Change-Id: I89cd3b41dd9c60bfd946e24567d0ff93e5ea9fff
Signed-off-by: Tibor Frank <tifrank@cisco.com>

2 files changed, 486 insertions, 0 deletions

diff --git a/tests/suites/honeycomb/6 - sub_interface.robot b/tests/suites/honeycomb/6 - sub_interface.robot
new file mode 100644
index 0000000000..50becace60
--- /dev/null
+++ b/tests/suites/honeycomb/6 - sub_interface.robot
@@ -0,0 +1,386 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/honeycomb/sub_interface.robot
+| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot
+| Resource | resources/libraries/robot/honeycomb/interfaces.robot
+| Variables | tests/suites/honeycomb/resources/sub_interfaces.py
+| Documentation | *Honeycomb sub-interface management test suite.*
+| ...
+| ...           | This test suite tests if it is posible to create, modify and\
+| ...           | delete a sub-interface.
+
+*** Variables ***
+| ${node}= | ${nodes['DUT1']}
+
+# Test interface 1 and its sub-interface parameters:
+| ${interface}= | ${node['interfaces']['port1']['name']}
+| ${sub_interface_id}= | 10
+| ${sub_interface_name}= | ${interface}.${sub_interface_id}
+| &{sub_interface_base_settings}=
+| ... | name=${sub_interface_name}
+| ... | type=v3po:sub-interface
+| &{sub_interface_settings}=
+| ... | super-interface=${interface}
+| ... | identifier=${sub_interface_id}
+| ... | vlan-type=802dot1ad
+| ... | number-of-tags=2
+| ... | outer-id=22
+| ... | inner-id=33
+| ... | match-any-outer-id=${FALSE}
+| ... | match-any-inner-id=${FALSE}
+| ... | exact-match=${TRUE}
+| ... | default-subif=${TRUE}
+| &{sub_interface_settings_wrong}=
+| ... | super-interface=${interface}
+| ... | identifier=${sub_interface_id}
+| ... | vlan-type=WRONG_TYPE
+| ... | number-of-tags=2
+| ... | outer-id=22
+| ... | inner-id=33
+| ... | match-any-outer-id=${TRUE}
+| ... | match-any-inner-id=${TRUE}
+| ... | exact-match=${TRUE}
+| ... | default-subif=${TRUE}
+
+# Test interface 2 and its sub-interface parameters:
+| ${interface2}= | ${node['interfaces']['port3']['name']}
+| ${sub_interface2_name}= | ${interface2}.${sub_interface_id}
+| &{sub_interface2_base_settings}=
+| ... | name=${sub_interface2_name}
+| ... | type=v3po:sub-interface
+| ... | v3po:l2=&{bd_rw_settings}
+| &{sub_interface2_settings}=
+| ... | super-interface=${interface2}
+| ... | identifier=${sub_interface_id}
+| ... | vlan-type=802dot1ad
+| ... | number-of-tags=2
+| ... | outer-id=44
+| ... | inner-id=55
+| ... | match-any-outer-id=${FALSE}
+| ... | match-any-inner-id=${FALSE}
+| ... | exact-match=${TRUE}
+| ... | default-subif=${FALSE}
+
+*** Test Cases ***
+| Honycomb creates sub-interface
+| | [Documentation] | Check if Honeycomb creates a sub-interface.
+| | ...
+| | [Tags] | honeycomb_sanity
+| | ...
+| | Given sub-interface configuration from Honeycomb should be empty
+| | ... | ${node} | ${sub_interface_name}
+| | And sub-interface configuration from VAT should be empty
+| | ... | ${node} | ${sub_interface_name}
+| | When Honeycomb creates sub-interface
+| | ... | ${node} | ${interface} | ${sub_interface_id}
+| | ... | ${sub_interface_base_settings} | ${sub_interface_settings}
+| | Then sub-interface configuration from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | ${sub_interface_base_settings}
+| | ... | ${sub_interface_settings}
+| | And sub-interface configuration from VAT should be
+| | ... | ${node} | ${sub_interface_name} | ${sub_interface_settings}
+
+| Honeycomb adds sub-interface to bridge domain
+| | [Documentation] | Check if Honeycomb adds a sub-interface to bridge domain.
+| | ...
+| | [Tags] | honeycomb_sanity
+| | ...
+| | Given sub-interface configuration from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | ${sub_interface_base_settings}
+| | ... | ${sub_interface_settings}
+| | When Honeycomb creates L2 bridge domain
+| | ... | ${node} | ${bd_name} | ${bd_settings}
+| | Then Bridge domain configuration from Honeycomb should be
+| | ... | ${node} | ${bd_name} | ${bd_settings}
+| | When Honeycomb adds sub-interface to bridge domain
+| | ... | ${node} | ${sub_interface_name} | ${bd_name} | ${sub_bd_settings}
+| | Then sub-interface bridge domain configuration from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | ${sub_bd_settings}
+| | And sub-interface bridge domain configuration from VAT should be
+| | ... | ${node} | ${sub_interface_name} | ${sub_bd_settings}
+| | And sub-interface configuration from VAT should be
+| | ... | ${node} | ${sub_interface_name} | ${sub_interface_settings}
+
+| Honeycomb sets vlan tag rewrite on sub-interface in bridge domain
+| | [Documentation] | Check if Honeycomb adds vlan tag rewrite on sub-interface\
+| | ... | in bridge domain.
+| | ...
+| | [Tags] | honeycomb_sanity
+| | ...
+| | Given sub-interface configuration from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | ${sub_interface_base_settings}
+| | ... | ${sub_interface_settings}
+| | And sub-interface bridge domain configuration from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | ${sub_bd_settings}
+| | &{init_rw_params}= | Create dictionary | first-pushed=802dot1ad
+| | ... | rewrite-operation=disabled
+| | And rewrite tag from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | ${init_rw_params}
+| | When Honeycomb sets rewrite tag
+| | ... | ${node} | ${sub_interface_name} | ${rw_params}
+| | Then rewrite tag from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | ${rw_params}
+| | And rewrite tag configuration from VAT should be
+| | ... | ${node} | ${sub_interface_name} | ${rw_params}
+| | And sub-interface configuration from VAT should be
+| | ... | ${node} | ${sub_interface_name} | ${sub_interface_settings}
+
+| Honeycomb edits vlan tag rewrite on sub-interface in bridge domain
+| | [Documentation] | Check if Honeycomb updates vlan tag rewrite on\
+| | ... | sub-interface in bridge domain.
+| | ...
+| | [Tags] | honeycomb_sanity
+| | ...
+| | Given sub-interface configuration from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | ${sub_interface_base_settings}
+| | ... | ${sub_interface_settings}
+| | And rewrite tag from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | ${rw_params}
+| | When Honeycomb sets rewrite tag
+| | ... | ${node} | ${sub_interface_name} | ${rw_params_edited}
+| | Then rewrite tag from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | ${rw_params_edited}
+| | And rewrite tag configuration from VAT should be
+| | ... | ${node} | ${sub_interface_name} | ${rw_params_edited}
+| | And sub-interface configuration from VAT should be
+| | ... | ${node} | ${sub_interface_name} | ${sub_interface_settings}
+
+| Honeycomb removes vlan tag rewrite from sub-interface
+| | [Documentation] | Check if Honeycomb removes vlan tag rewrite from\
+| | ... | sub-interface.
+| | ...
+| | [Tags] | honeycomb_sanity
+| | ...
+| | Given sub-interface configuration from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | ${sub_interface_base_settings}
+| | ... | ${sub_interface_settings}
+| | And rewrite tag from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | ${rw_params_edited}
+| | When Honeycomb removes rewrite tag
+| | ... | ${node} | ${sub_interface_name}
+| | Then rewrite tag from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | ${rw_params_disabled}
+| | And rewrite tag configuration from VAT should be
+| | ... | ${node} | ${sub_interface_name} | ${rw_params_disabled}
+| | And sub-interface configuration from VAT should be
+| | ... | ${node} | ${sub_interface_name} | ${sub_interface_settings}
+
+| Honeycomb sets again vlan tag rewrite on sub-interface in bridge domain
+| | [Documentation] | Check if Honeycomb adds vlan tag rewrite on sub-interface\
+| | ... | in bridge domain if it was disabled before.
+| | ...
+| | [Tags] | honeycomb_sanity
+| | ...
+| | Given sub-interface configuration from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | ${sub_interface_base_settings}
+| | ... | ${sub_interface_settings}
+| | And rewrite tag from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | ${rw_params_disabled}
+| | When Honeycomb sets rewrite tag
+| | ... | ${node} | ${sub_interface_name} | ${rw_params}
+| | Then rewrite tag from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | ${rw_params}
+| | And rewrite tag configuration from VAT should be
+| | ... | ${node} | ${sub_interface_name} | ${rw_params}
+| | And sub-interface configuration from VAT should be
+| | ... | ${node} | ${sub_interface_name} | ${sub_interface_settings}
+
+| Honycomb deletes sub-interface
+| | [Documentation] | Check if Honeycomb can delete an existing sub-interface.
+| | ...
+| | [Tags] | honeycomb_sanity
+| | ...
+| | Given sub-interface configuration from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | ${sub_interface_base_settings}
+| | ... | ${sub_interface_settings}
+| | When Honeycomb fails to remove sub-interface
+| | ... | ${node} | ${sub_interface_name}
+| | Then sub-interface configuration from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | ${sub_interface_base_settings}
+| | ... | ${sub_interface_settings}
+| | And sub-interface configuration from VAT should be
+| | ... | ${node} | ${sub_interface_name} | ${sub_interface_settings}
+
+| Honycomb creates sub-interface with bridge domain
+| | [Documentation] | Check if Honeycomb creates a sub-interface with bridge\
+| | ... | domain and rewrite tag configured.
+| | ...
+| | [Tags] | honeycomb_sanity
+| | ...
+| | Given sub-interface configuration from Honeycomb should be empty
+| | ... | ${node} | ${sub_interface2_name}
+| | And sub-interface configuration from VAT should be empty
+| | ... | ${node} | ${sub_interface2_name}
+| | When Honeycomb creates L2 bridge domain
+| | ... | ${node} | ${bd2_name} | ${bd2_settings}
+| | And Honeycomb creates sub-interface
+| | ... | ${node} | ${interface2} | ${sub_interface_id}
+| | ... | ${sub_interface2_base_settings} | ${sub_interface2_settings}
+| | Then sub-interface configuration with bd and rw from Honeycomb should be
+| | ... | ${node} | ${sub_interface2_name} | ${sub_interface2_base_settings}
+| | ... | ${sub_interface2_settings}
+| | And sub-interface configuration from VAT should be
+| | ... | ${node} | ${sub_interface2_name} | ${sub_interface2_settings}
+| | And rewrite tag configuration from VAT should be
+| | ... | ${node} | ${sub_interface2_name} | ${rw_params}
+
+| Honeycomb sets wrong operation in vlan tag rewrite
+| | [Documentation] | Negative test: Honeycomb tries to set a wrong value of\
+| | ... | "rewrite-operation" parameter in "vlan-tag-rewrite". The operation\
+| | ... | must fail.
+| | ...
+| | [Tags] | honeycomb_sanity
+| | ...
+| | Given sub-interface configuration with bd and rw from Honeycomb should be
+| | ... | ${node} | ${sub_interface2_name} | ${sub_interface2_base_settings}
+| | ... | ${sub_interface2_settings}
+| | And rewrite tag from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | ${rw_params_disabled}
+| | When Honeycomb fails to set wrong rewrite tag
+| | ... | ${node} | ${sub_interface_name} | ${rw_params_wrong_op}
+| | Then sub-interface configuration with bd and rw from Honeycomb should be
+| | ... | ${node} | ${sub_interface2_name} | ${sub_interface2_base_settings}
+| | ... | ${sub_interface2_settings}
+| | And rewrite tag from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | ${rw_params_disabled}
+| | And rewrite tag configuration from VAT should be
+| | ... | ${node} | ${sub_interface_name} | ${rw_params_disabled}
+
+| Honeycomb sets wrong first-pushed in vlan tag rewrite
+| | [Documentation] | Negative test: Honeycomb tries to set a wrong value of\
+| | ... | "first-pushed" parameter in "vlan-tag-rewrite". The operation must\
+| | ... | fail.
+| | ...
+| | [Tags] | honeycomb_sanity
+| | ...
+| | Given sub-interface configuration with bd and rw from Honeycomb should be
+| | ... | ${node} | ${sub_interface2_name} | ${sub_interface2_base_settings}
+| | ... | ${sub_interface2_settings}
+| | And rewrite tag from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | ${rw_params_disabled}
+| | When Honeycomb fails to set wrong rewrite tag
+| | ... | ${node} | ${sub_interface_name} | ${rw_params_wrong_pushed}
+| | Then sub-interface configuration with bd and rw from Honeycomb should be
+| | ... | ${node} | ${sub_interface2_name} | ${sub_interface2_base_settings}
+| | ... | ${sub_interface2_settings}
+| | And rewrite tag from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | ${rw_params_disabled}
+| | And rewrite tag configuration from VAT should be
+| | ... | ${node} | ${sub_interface_name} | ${rw_params_disabled}
+
+| Honeycomb sets interface and sub-interface up
+| | [Documentation] | Honeycomb changes the state of interface up and then\
+| | ... | changes the state of its sub-interface up, in this order.
+| | ...
+| | [Tags] | honeycomb_sanity
+| | ...
+| | Given interface state from Honeycomb should be
+| | ... | ${node} | ${interface} | down
+| | And interface state from VAT should be
+| | ... | ${node} | ${interface} | down
+| | When Honeycomb sets interface state
+| | ... | ${node} | ${interface} | up
+| | Then interface state from Honeycomb should be
+| | ... | ${node} | ${interface} | up
+| | And interface state from VAT should be
+| | ... | ${node} | ${interface} | up
+| | Given interface state from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | down
+| | And interface state from VAT should be
+| | ... | ${node} | ${sub_interface_name} | down
+| | When Honeycomb sets interface state
+| | ... | ${node} | ${sub_interface_name} | up
+| | Then interface state from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | up
+| | And Interface state from VAT should be
+| | ... | ${node} | ${sub_interface_name} | up
+
+| Honeycomb sets sub-interface down while its super-interface is up
+| | [Documentation] | Honeycomb sets the sub-interface down while its\
+| | ... | super-interface is up. It must be possible.
+| | ...
+| | [Tags] | honeycomb_sanity
+| | ...
+| | Given interface state from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | up
+| | And Interface state from VAT should be
+| | ... | ${node} | ${sub_interface_name} | up
+| | And interface state from Honeycomb should be
+| | ... | ${node} | ${interface} | up
+| | And interface state from VAT should be
+| | ... | ${node} | ${interface} | up
+| | When Honeycomb sets interface state
+| | ... | ${node} | ${sub_interface_name} | down
+| | Then Interface state from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | down
+| | And Interface state from VAT should be
+| | ... | ${node} | ${sub_interface_name} | down
+| | And interface state from Honeycomb should be
+| | ... | ${node} | ${interface} | up
+| | And interface state from VAT should be
+| | ... | ${node} | ${interface} | up
+
+| Honeycomb sets interface and sub-interface down
+| | [Documentation] | Honeycomb changes the state of interface down and then\
+| | ... | changes the state of its sub-interface down, in this order.
+| | ...
+| | [Tags] | honeycomb_sanity
+| | ...
+| | Given interface state from Honeycomb should be
+| | ... | ${node} | ${interface} | up
+| | And interface state from VAT should be
+| | ... | ${node} | ${interface} | up
+| | When Honeycomb sets interface state
+| | ... | ${node} | ${interface} | down
+| | Then interface state from Honeycomb should be
+| | ... | ${node} | ${interface} | down
+| | And Interface state from VAT should be
+| | ... | ${node} | ${interface} | down
+| | Given interface state from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | up
+| | And interface state from VAT should be
+| | ... | ${node} | ${sub_interface_name} | up
+| | When Honeycomb sets interface state
+| | ... | ${node} | ${sub_interface_name} | down
+| | Then Interface state from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | down
+| | And Interface state from VAT should be
+| | ... | ${node} | ${sub_interface_name} | down
+
+| Honeycomb fails to set sub-interface up while its super-interface is down
+| | [Documentation] | Honeycomb tries to set the sub-interface up while its\
+| | ... | super-interface is down. It must not be possible.
+| | ...
+| | [Tags] | honeycomb_sanity
+| | ...
+| | Given interface state from Honeycomb should be
+| | ... | ${node} | ${interface} | down
+| | And interface state from VAT should be
+| | ... | ${node} | ${interface} | down
+| | And interface state from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | down
+| | And interface state from VAT should be
+| | ... | ${node} | ${sub_interface_name} | down
+| | When Honeycomb fails to set sub-interface up
+| | ... | ${node} | ${sub_interface_name}
+| | Then interface state from Honeycomb should be
+| | ... | ${node} | ${interface} | down
+| | And interface state from VAT should be
+| | ... | ${node} | ${interface} | down
+| | And interface state from Honeycomb should be
+| | ... | ${node} | ${sub_interface_name} | down
+| | And interface state from VAT should be
+| | ... | ${node} | ${sub_interface_name} | down
diff --git a/tests/suites/honeycomb/resources/sub_interfaces.py b/tests/suites/honeycomb/resources/sub_interfaces.py
new file mode 100644
index 0000000000..9c18984930
--- /dev/null
+++ b/tests/suites/honeycomb/resources/sub_interfaces.py
@@ -0,0 +1,100 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Test variables for Honeycomb sub-interface test suite."""
+
+# Bridge domain name.
+bd_name = 'test-sub-bd'
+
+# Bridge domain settings used while creating a test bridge domain.
+bd_settings = {
+    'flood': True,
+    'forward': True,
+    'learn': True,
+    'unknown-unicast-flood': True,
+    'arp-termination': True
+}
+
+# Bridge domain configuration used while adding the bridge domain to a
+# sub-interface.
+sub_bd_settings = {
+    'bridge-domain': bd_name,
+    'split-horizon-group': '0',
+    'bridged-virtual-interface': 'False'
+}
+
+# Rewrite tag parameters used while setting the rewrite tag.
+rw_params = {
+    'rewrite-operation': 'pop-1',
+    'first-pushed': '802dot1ad',
+    'tag1': '1',
+    'tag2': '2'
+}
+
+# Rewrite tag parameters used while editing the rewrite tag.
+rw_params_edited = {
+    'rewrite-operation': 'push-1',
+    'first-pushed': '802dot1q',
+    'tag1': '12',
+    'tag2': '22'
+}
+
+# Rewrite tag parameters when it is disabled.
+rw_params_disabled = {
+    'rewrite-operation': 'disabled',
+    'first-pushed': '802dot1ad'
+}
+
+# Rewrite tag parameters - wrong value of 'rewrite-operation' parameter.
+# Used in negative test.
+rw_params_wrong_op = {
+    'rewrite-operation': 'WRONG_OP',
+    'first-pushed': '802dot1q',
+    'tag1': '1',
+    'tag2': '2'
+}
+
+# Rewrite tag parameters - wrong value of 'first-pushed' parameter.
+# Used in negative test.
+rw_params_wrong_pushed = {
+    'rewrite-operation': 'pop-1',
+    'first-pushed': 'WRONG_PUSHED',
+    'tag1': '1',
+    'tag2': '2'
+}
+
+# Second bridge domain name.
+bd2_name = 'test-sub-bd2'
+sub2_bd_settings = {
+    'bridge-domain': bd2_name,
+    'split-horizon-group': '0',
+    'bridged-virtual-interface': 'False'
+}
+
+# Second bridge domain configuration used while adding the bridge domain to a
+# sub-interface.
+bd2_settings = {
+    'flood': True,
+    'forward': True,
+    'learn': True,
+    'unknown-unicast-flood': True,
+    'arp-termination': True
+}
+
+# Parameters of a bridge domain with rewrite tag.
+bd_rw_settings = {
+    'bridge-domain': bd2_name,
+    'split-horizon-group': '0',
+    'bridged-virtual-interface': 'False',
+    'vlan-tag-rewrite': rw_params
+}