diff options
13 files changed, 151 insertions, 508 deletions
diff --git a/GPL/traffic_profiles/trex/trex-stl-ethip4udp-1u63p.py b/GPL/traffic_profiles/trex/trex-stl-ethip4udp-1u63p.py deleted file mode 100644 index ed28e915ca..0000000000 --- a/GPL/traffic_profiles/trex/trex-stl-ethip4udp-1u63p.py +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -"""Stream profile for T-rex traffic generator. - -Stream profile: - - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. - - Packet: ETH / IP / UDP - - Direction 0 --> 1: - - Source IP address range: 192.168.0.0 - - Destination IP address range: 20.0.0.0 - - Source UDP port range: 1024 - 1086 - - Destination UDP port range: 1024 - - Direction 1 --> 0: - - Source IP address range: 20.0.0.0 - - Destination IP address range: 68.142.68.0 - - Source UDP port range: 1024 - - Destination UDP port range: 1024 - 16017 -""" - -from trex.stl.api import * -from profile_trex_stateless_base_class import TrafficStreamsBaseClass - - -class TrafficStreams(TrafficStreamsBaseClass): - """Stream profile.""" - - def __init__(self): - """Initialization and setting of streams' parameters.""" - - super(TrafficStreamsBaseClass, self).__init__() - - # IPs used in packet headers. - self.p1_src_start_ip = u"192.168.0.0" - self.p1_src_end_ip = u"192.168.0.0" - self.p1_dst_start_ip = u"20.0.0.0" - self.p1_dst_end_ip = u"20.0.0.0" - - self.p2_src_start_ip = u"20.0.0.0" - self.p2_src_end_ip = u"20.0.0.0" - self.p2_dst_start_ip = u"68.142.68.0" - self.p2_dst_end_ip = u"68.142.68.0" - - # UDP ports used in packet headers. - self.p1_src_start_udp_port = 1024 - self.p1_src_end_udp_port = 1086 - self.p1_dst_start_udp_port = 1024 - self.p1_dst_end_udp_port = 1024 - - self.p2_src_start_udp_port = 1024 - self.p2_src_end_udp_port = 1024 - self.p2_dst_start_udp_port = 1024 - self.p2_dst_end_udp_port = 16017 - - def define_packets(self): - """Defines the packets to be sent from the traffic generator. - - Packet definition: | ETH | IP | UDP | - - :returns: Packets to be sent from the traffic generator. - :rtype: tuple - """ - - # Direction 0 --> 1 - base_pkt_a = ( - Ether() / - IP( - src=self.p1_src_start_ip, - dst=self.p1_dst_start_ip, - proto=17 - ) / - UDP( - sport=self.p1_src_start_udp_port, - dport=self.p1_dst_start_udp_port - ) - ) - # Direction 1 --> 0 - base_pkt_b = ( - Ether() / - IP( - src=self.p2_src_start_ip, - dst=self.p2_dst_start_ip, - proto=17 - ) / - UDP( - sport=self.p2_src_start_udp_port, - dport=self.p2_dst_start_udp_port - ) - ) - - # Direction 0 --> 1 - vm1 = STLVM() - vm1.var(name="sIP", - min_value=self.p1_src_start_ip, - max_value=self.p1_src_end_ip, - size=4, - op="inc", - next_var="sport") - vm1.var(name="sport", - min_value=self.p1_src_start_udp_port, - max_value=self.p1_src_end_udp_port, - size=2, - op="inc") - vm1.var(name="dIP", - min_value=self.p1_dst_start_ip, - max_value=self.p1_dst_end_ip, - size=4, - op="inc") - vm1.var(name="dport", - min_value=self.p1_dst_start_udp_port, - max_value=self.p1_dst_end_udp_port, - size=2, - op="inc") - vm1.write(fv_name="sIP", pkt_offset="IP.src") - vm1.write(fv_name="sport", pkt_offset="UDP.sport") - vm1.write(fv_name="dIP", pkt_offset="IP.dst") - vm1.write(fv_name="dport", pkt_offset="UDP.dport") - vm1.fix_chksum(offset='IP') - # Direction 0 --> 1 - vm2 = STLVM() - vm2.var(name="sIP", - min_value=self.p2_src_start_ip, - max_value=self.p2_src_end_ip, - size=4, - op="inc", - next_var="sport") - vm2.var(name="sport", - min_value=self.p2_src_start_udp_port, - max_value=self.p2_src_end_udp_port, - size=2, - op="inc") - vm2.var(name="dIP", - min_value=self.p2_dst_start_ip, - max_value=self.p2_dst_end_ip, - size=4, - op="inc", - next_var="dport") - vm2.var(name="dport", - min_value=self.p2_dst_start_udp_port, - max_value=self.p2_dst_end_udp_port, - size=2, - op="inc") - vm2.write(fv_name="sIP", pkt_offset="IP.src") - vm2.write(fv_name="sport", pkt_offset="UDP.sport") - vm2.write(fv_name="dIP", pkt_offset="IP.dst") - vm2.write(fv_name="dport", pkt_offset="UDP.dport") - vm2.fix_chksum(offset='IP') - - return base_pkt_a, base_pkt_b, vm1, vm2 - -def register(): - """Register this traffic profile to T-rex. - - Do not change this function. - - :return: Traffic streams. - :rtype: Object - """ - return TrafficStreams() diff --git a/GPL/traffic_profiles/trex/trex-stl-ethip4udp-238u63p.py b/GPL/traffic_profiles/trex/trex-stl-ethip4udp-238u63p.py deleted file mode 100644 index f6b2276351..0000000000 --- a/GPL/traffic_profiles/trex/trex-stl-ethip4udp-238u63p.py +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -"""Stream profile for T-rex traffic generator. - -Stream profile: - - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. - - Packet: ETH / IP / UDP - - Direction 0 --> 1: - - Source IP address range: 192.168.0.0 - 192.168.0.237 - - Destination IP address range: 20.0.0.0 - - Source UDP port range: 1024 - 1086 - - Destination UDP port range: 1024 - - Direction 1 --> 0: - - Source IP address range: 20.0.0.0 - - Destination IP address range: 68.142.68.0 - - Source UDP port range: 1024 - - Destination UDP port range: 1024 - 16017 -""" - -from trex.stl.api import * -from profile_trex_stateless_base_class import TrafficStreamsBaseClass - - -class TrafficStreams(TrafficStreamsBaseClass): - """Stream profile.""" - - def __init__(self): - """Initialization and setting of streams' parameters.""" - - super(TrafficStreamsBaseClass, self).__init__() - - # IPs used in packet headers. - self.p1_src_start_ip = u"192.168.0.0" - self.p1_src_end_ip = u"192.168.0.237" - self.p1_dst_start_ip = u"20.0.0.0" - self.p1_dst_end_ip = u"20.0.0.0" - - self.p2_src_start_ip = u"20.0.0.0" - self.p2_src_end_ip = u"20.0.0.0" - self.p2_dst_start_ip = u"68.142.68.0" - self.p2_dst_end_ip = u"68.142.68.0" - - # UDP ports used in packet headers. - self.p1_src_start_udp_port = 1024 - self.p1_src_end_udp_port = 1086 - self.p1_dst_start_udp_port = 1024 - self.p1_dst_end_udp_port = 1024 - - self.p2_src_start_udp_port = 1024 - self.p2_src_end_udp_port = 1024 - self.p2_dst_start_udp_port = 1024 - self.p2_dst_end_udp_port = 16017 - - def define_packets(self): - """Defines the packets to be sent from the traffic generator. - - Packet definition: | ETH | IP | UDP | - - :returns: Packets to be sent from the traffic generator. - :rtype: tuple - """ - - # Direction 0 --> 1 - base_pkt_a = ( - Ether() / - IP( - src=self.p1_src_start_ip, - dst=self.p1_dst_start_ip, - proto=17 - ) / - UDP( - sport=self.p1_src_start_udp_port, - dport=self.p1_dst_start_udp_port - ) - ) - # Direction 1 --> 0 - base_pkt_b = ( - Ether() / - IP( - src=self.p2_src_start_ip, - dst=self.p2_dst_start_ip, - proto=17 - ) / - UDP( - sport=self.p2_src_start_udp_port, - dport=self.p2_dst_start_udp_port - ) - ) - - # Direction 0 --> 1 - vm1 = STLVM() - vm1.var(name="sIP", - min_value=self.p1_src_start_ip, - max_value=self.p1_src_end_ip, - size=4, - op="inc", - next_var="sport") - vm1.var(name="sport", - min_value=self.p1_src_start_udp_port, - max_value=self.p1_src_end_udp_port, - size=2, - op="inc") - vm1.var(name="dIP", - min_value=self.p1_dst_start_ip, - max_value=self.p1_dst_end_ip, - size=4, - op="inc") - vm1.var(name="dport", - min_value=self.p1_dst_start_udp_port, - max_value=self.p1_dst_end_udp_port, - size=2, - op="inc") - vm1.write(fv_name="sIP", pkt_offset="IP.src") - vm1.write(fv_name="sport", pkt_offset="UDP.sport") - vm1.write(fv_name="dIP", pkt_offset="IP.dst") - vm1.write(fv_name="dport", pkt_offset="UDP.dport") - vm1.fix_chksum(offset='IP') - # Direction 0 --> 1 - vm2 = STLVM() - vm2.var(name="sIP", - min_value=self.p2_src_start_ip, - max_value=self.p2_src_end_ip, - size=4, - op="inc", - next_var="sport") - vm2.var(name="sport", - min_value=self.p2_src_start_udp_port, - max_value=self.p2_src_end_udp_port, - size=2, - op="inc") - vm2.var(name="dIP", - min_value=self.p2_dst_start_ip, - max_value=self.p2_dst_end_ip, - size=4, - op="inc", - next_var="dport") - vm2.var(name="dport", - min_value=self.p2_dst_start_udp_port, - max_value=self.p2_dst_end_udp_port, - size=2, - op="inc") - vm2.write(fv_name="sIP", pkt_offset="IP.src") - vm2.write(fv_name="sport", pkt_offset="UDP.sport") - vm2.write(fv_name="dIP", pkt_offset="IP.dst") - vm2.write(fv_name="dport", pkt_offset="UDP.dport") - vm2.fix_chksum(offset='IP') - - return base_pkt_a, base_pkt_b, vm1, vm2 - -def register(): - """Register this traffic profile to T-rex. - - Do not change this function. - - :return: Traffic streams. - :rtype: Object - """ - return TrafficStreams() diff --git a/resources/libraries/python/NATUtil.py b/resources/libraries/python/NATUtil.py index 4ce72d84b4..857870393e 100644 --- a/resources/libraries/python/NATUtil.py +++ b/resources/libraries/python/NATUtil.py @@ -186,7 +186,7 @@ class NATUtil: PapiSocketExecutor.dump_and_log(node, cmds) # DET44 PAPI calls - # DET44 means deterministic mode of NAT + # DET44 means deterministic mode of NAT44 @staticmethod def enable_det44_plugin(node, inside_vrf=0, outside_vrf=0): """Enable DET44 plugin. @@ -262,6 +262,38 @@ class NATUtil: papi_exec.add(cmd, **args_in).get_reply(err_msg) @staticmethod + def get_det44_mapping(node): + """Get DET44 mapping data. + + :param node: DUT node. + :type node: dict + :returns: Dictionary of DET44 mapping data. + :rtype: dict + """ + cmd = u"det44_map_dump" + err_msg = f"Failed to get DET44 mapping data on the host " \ + f"{node[u'host']}!" + args_in = dict() + with PapiSocketExecutor(node) as papi_exec: + details = papi_exec.add(cmd, **args_in).get_reply(err_msg) + + return details + + @staticmethod + def get_det44_sessions_number(node): + """Get number of established DET44 sessions from actual DET44 mapping + data. + + :param node: DUT node. + :type node: dict + :returns: Number of established DET44 sessions. + :rtype: int + """ + det44_data = NATUtil.get_det44_mapping(node) + + return det44_data.get(u"ses_num", 0) + + @staticmethod def show_det44(node): """Show DET44 data. diff --git a/resources/libraries/robot/ip/nat.robot b/resources/libraries/robot/ip/nat.robot index 25218af456..2c88cbb294 100644 --- a/resources/libraries/robot/ip/nat.robot +++ b/resources/libraries/robot/ip/nat.robot @@ -190,3 +190,20 @@ | | [Arguments] | ${node} | | | | Show DET44 | ${node} + +| Verify DET44 sessions number +| | [Documentation] | Verify that all required DET44 sessions are established. +| | +| | ... | *Arguments:* +| | ... | - node - DUT node. Type: dictionary +| | ... | - exp_n_sessions - Expected number of DET44 sessions. Type: integer +| | +| | ... | *Example:* +| | +| | ... | \| Verify DET44 sessions number \| ${nodes['DUT1']} \| ${64512} \| +| | +| | [Arguments] | ${node} | ${exp_n_sessions} +| | +| | ${det44_sessions}= | Get DET44 Sessions Number | ${node} +| | Should Be Equal As Integers | ${det44_sessions} | ${exp_n_sessions} +| | ... | Not all DET44 sessions have been established diff --git a/resources/libraries/robot/performance/performance_utils.robot b/resources/libraries/robot/performance/performance_utils.robot index af58da07e0..d820d5c187 100644 --- a/resources/libraries/robot/performance/performance_utils.robot +++ b/resources/libraries/robot/performance/performance_utils.robot @@ -30,6 +30,11 @@ | ${trial_duration}= | ${PERF_TRIAL_DURATION} | ${trial_multiplicity}= | ${PERF_TRIAL_MULTIPLICITY} | ${extended_debug}= | ${EXTENDED_DEBUG} +| # Variable holding trial duration extension [s] used in pre_stats action +| # clear-show-runtime-with-traffic. By default it is set to 0 but some +| # tests (e.g. NAT) needs this duration extension in ramp up phase (e.g. to +| # create all required nat sessions). +| ${pre_stats_duration_ext}= | ${0} *** Keywords *** | Find NDR and PDR intervals using optimized search @@ -681,12 +686,23 @@ | | ... | Additional Statistics Action for clear and show runtime counters with | | ... | running traffic. | | +| | ${trial_duration}= | Evaluate +| | ... | ${trial_duration} + ${pre_stats_duration_ext} +| | ${rate}= | Get Variable Value | ${pre_stats_rate} | ${rate} | | Clear and show runtime counters with running traffic -| | ... | ${trial_duration} | ${rate} | ${frame_size} | ${traffic_profile} -| | ... | ${traffic_directions} | ${tx_port} | ${rx_port} +| | ... | ${trial_duration} | ${rate} +| | ... | ${frame_size} | ${traffic_profile} | ${traffic_directions} +| | ... | ${tx_port} | ${rx_port} + +| Additional Statistics Action For vpp-det44-verify-sessions +| | [Documentation] +| | ... | Additional Statistics Action to verify that all required DET44 +| | ... | sessions are established. +| | +| | Verify DET44 sessions number | ${nodes['DUT1']} | ${n_sessions} | Additional Statistics Action For noop | | [Documentation] | | ... | Additional Statistics Action for no operation. | | -| | No operation
\ No newline at end of file +| | No operation diff --git a/resources/libraries/robot/shared/default.robot b/resources/libraries/robot/shared/default.robot index c9d924edc1..f3d7ed47dd 100644 --- a/resources/libraries/robot/shared/default.robot +++ b/resources/libraries/robot/shared/default.robot @@ -151,7 +151,7 @@ | | | Run Keyword | ${dut}.Add Unix Nodaemon | | | Run Keyword | ${dut}.Add Unix Coredump | | | Run Keyword | ${dut}.Add Socksvr | ${SOCKSVR_PATH} -| | | Run Keyword | ${dut}.Add Main Heap Size | 2G +| | | Run Keyword | ${dut}.Add Main Heap Size | 6G | | | Run Keyword | ${dut}.Add Main Heap Page Size | 2M | | | Run Keyword | ${dut}.Add Statseg Size | 2G | | | Run Keyword | ${dut}.Add Statseg Page Size | 2M diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1-p1-s1-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1-p1-s1-ndrpdr.robot index 052d091c9b..68e9723061 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1-p1-s1-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1-p1-s1-ndrpdr.robot @@ -78,7 +78,11 @@ | ${in_mask}= | ${32} | ${out_net}= | 200.0.0.0 | ${out_mask}= | ${32} -# Traffic profile: +# Scale settings +| ${n_hosts}= | ${1} +| ${n_ports}= | ${1} +| ${n_sessions}= | ${${n_hosts} * ${n_ports}} +# Traffic profile | ${traffic_profile}= | trex-stl-2n-ethip4udp-1u1p *** Keywords *** @@ -99,6 +103,13 @@ | | | | Set Test Variable | \${frame_size} | | +| | ${pre_stats}= | Create List +| | ... | clear-show-runtime-with-traffic | vpp-det44-verify-sessions +| | ... | vpp-clear-stats | vpp-enable-packettrace | vpp-enable-elog +| | Set Test Variable | ${pre_stats} +| | # Reduce the rate for pre_stat action +| | Set Test Variable | ${pre_stats_rate} | ${500000} +| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1-p63-s63-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1-p63-s63-ndrpdr.robot deleted file mode 100644 index d6058552fa..0000000000 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1-p63-s63-ndrpdr.robot +++ /dev/null @@ -1,156 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | NAT44_DETERMINISTIC -| ... | SRC_USER_1 | BASE | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4udp-nat44det-h1-p63-s63 -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | det44 -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\ -| ... | two static IPv4 /22 and IPv4 /24 route entries.\ -| ... | DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with UDP header and static payload. MAC addresses are matching MAC\ -| ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | det44_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${0} -# IP addresing -| ${tg_if1_ip4}= | 10.0.0.2 -| ${tg_if1_mask}= | ${20} -| ${tg_if2_ip4}= | 12.0.0.2 -| ${tg_if2_mask}= | ${20} -| ${dut1_if1_ip4}= | 10.0.0.1 -| ${dut1_if1_mask}= | ${20} -| ${dut1_if2_ip4}= | 11.0.0.1 -| ${dut1_if2_mask}= | ${20} -| ${dest_net}= | 20.0.0.0 -| ${dest_mask}= | ${24} -# NAT settings -| ${nat_mode}= | deterministic -| ${in_net}= | 192.168.0.0 -| ${in_mask}= | ${22} -| ${out_net}= | 68.142.68.0 -| ${out_mask}= | ${32} -# Traffic profile: -| ${traffic_profile}= | trex-stl-ethip4udp-1u63p - -*** Keywords *** -| Local Template -| | -| | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPv4 forwarding for NAT44 in circular topology -| | And Initialize NAT44 deterministic mode in circular topology -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4udp-nat44det-h1-p63-s63-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4udp-nat44det-h1-p63-s63-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4udp-nat44det-h1-p63-s63-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4udp-nat44det-h1-p63-s63-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4udp-nat44det-h1-p63-s63-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4udp-nat44det-h1-p63-s63-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4udp-nat44det-h1-p63-s63-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4udp-nat44det-h1-p63-s63-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4udp-nat44det-h1-p63-s63-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4udp-nat44det-h1-p63-s63-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4udp-nat44det-h1-p63-s63-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4udp-nat44det-h1-p63-s63-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1024-p63-s64512-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1024-p63-s64512-ndrpdr.robot index 96a1d64e49..e8daa6484e 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1024-p63-s64512-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1024-p63-s64512-ndrpdr.robot @@ -75,7 +75,11 @@ | ${in_mask}= | ${22} | ${out_net}= | 68.142.68.0 | ${out_mask}= | ${32} -# Traffic profile: +# Scale settings +| ${n_hosts}= | ${1024} +| ${n_ports}= | ${63} +| ${n_sessions}= | ${${n_hosts} * ${n_ports}} +# Traffic profile | ${traffic_profile}= | trex-stl-ethip4udp-1024u63p *** Keywords *** @@ -96,6 +100,13 @@ | | | | Set Test Variable | \${frame_size} | | +| | ${pre_stats}= | Create List +| | ... | clear-show-runtime-with-traffic | vpp-det44-verify-sessions +| | ... | vpp-clear-stats | vpp-enable-packettrace | vpp-enable-elog +| | Set Test Variable | ${pre_stats} +| | # Reduce the rate for pre_stat action +| | Set Test Variable | ${pre_stats_rate} | ${500000} +| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h16384-p63-s1032192-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h16384-p63-s1032192-ndrpdr.robot index bf75e3b37b..dd5276a4db 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h16384-p63-s1032192-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h16384-p63-s1032192-ndrpdr.robot @@ -75,7 +75,11 @@ | ${in_mask}= | ${18} | ${out_net}= | 68.142.68.0 | ${out_mask}= | ${28} -# Traffic profile: +# Scale settings +| ${n_hosts}= | ${16384} +| ${n_ports}= | ${63} +| ${n_sessions}= | ${${n_hosts} * ${n_ports}} +# Traffic profile | ${traffic_profile}= | trex-stl-ethip4udp-16384u63p *** Keywords *** @@ -96,6 +100,15 @@ | | | | Set Test Variable | \${frame_size} | | +| | ${pre_stats}= | Create List +| | ... | clear-show-runtime-with-traffic | vpp-det44-verify-sessions +| | ... | vpp-clear-stats | vpp-enable-packettrace | vpp-enable-elog +| | Set Test Variable | ${pre_stats} +| | # Trial duration extension for pre_stat action +| | Set Test Variable | ${pre_stats_duration_ext} | ${2.1} +| | # Reduce the rate for pre_stat action +| | Set Test Variable | ${pre_stats_rate} | ${400000} +| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h262144-p63-s16515072-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h262144-p63-s16515072-ndrpdr.robot index 8c6661ec66..9400336cb3 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h262144-p63-s16515072-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h262144-p63-s16515072-ndrpdr.robot @@ -75,7 +75,11 @@ | ${in_mask}= | ${14} | ${out_net}= | 68.142.68.0 | ${out_mask}= | ${24} -# Traffic profile: +# Scale settings +| ${n_hosts}= | ${262144} +| ${n_ports}= | ${63} +| ${n_sessions}= | ${${n_hosts} * ${n_ports}} +# Traffic profile | ${traffic_profile}= | trex-stl-ethip4udp-262144u63p *** Keywords *** @@ -96,6 +100,15 @@ | | | | Set Test Variable | \${frame_size} | | +| | ${pre_stats}= | Create List +| | ... | clear-show-runtime-with-traffic | vpp-det44-verify-sessions +| | ... | vpp-clear-stats | vpp-enable-packettrace | vpp-enable-elog +| | Set Test Variable | ${pre_stats} +| | # Trial duration extension for pre_stat action +| | Set Test Variable | ${pre_stats_duration_ext} | ${80.1} +| | # Reduce the rate for pre_stat action +| | Set Test Variable | ${pre_stats_rate} | ${200000} +| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h4096-p63-s258048-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h4096-p63-s258048-ndrpdr.robot index ad7c1de539..54ab91e7b4 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h4096-p63-s258048-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h4096-p63-s258048-ndrpdr.robot @@ -58,7 +58,7 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${0} -# IP addresing +# IP settings | ${tg_if1_ip4}= | 10.0.0.2 | ${tg_if1_mask}= | ${20} | ${tg_if2_ip4}= | 12.0.0.2 @@ -72,10 +72,14 @@ # NAT settings | ${nat_mode}= | deterministic | ${in_net}= | 192.168.0.0 -| ${in_mask}= | ${30} +| ${in_mask}= | ${20} | ${out_net}= | 68.142.68.0 -| ${out_mask}= | ${32} -# Traffic profile: +| ${out_mask}= | ${30} +# Scale settings +| ${n_hosts}= | ${4096} +| ${n_ports}= | ${63} +| ${n_sessions}= | ${${n_hosts} * ${n_ports}} +# Traffic profile | ${traffic_profile}= | trex-stl-ethip4udp-4096u63p *** Keywords *** @@ -96,6 +100,13 @@ | | | | Set Test Variable | \${frame_size} | | +| | ${pre_stats}= | Create List +| | ... | clear-show-runtime-with-traffic | vpp-det44-verify-sessions +| | ... | vpp-clear-stats | vpp-enable-packettrace | vpp-enable-elog +| | Set Test Variable | ${pre_stats} +| | # Reduce the rate for pre_stat action +| | Set Test Variable | ${pre_stats_rate} | ${500000} +| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h65536-p63-s4128758-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h65536-p63-s4128758-ndrpdr.robot index 96b74b20e0..983afe96e8 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h65536-p63-s4128758-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h65536-p63-s4128758-ndrpdr.robot @@ -75,7 +75,11 @@ | ${in_mask}= | ${16} | ${out_net}= | 68.142.68.0 | ${out_mask}= | ${26} -# Traffic profile: +# Scale settings +| ${n_hosts}= | ${65536} +| ${n_ports}= | ${63} +| ${n_sessions}= | ${${n_hosts} * ${n_ports}} +# Traffic profile | ${traffic_profile}= | trex-stl-ethip4udp-65536u63p *** Keywords *** @@ -96,6 +100,15 @@ | | | | Set Test Variable | \${frame_size} | | +| | ${pre_stats}= | Create List +| | ... | clear-show-runtime-with-traffic | vpp-det44-verify-sessions +| | ... | vpp-clear-stats | vpp-enable-packettrace | vpp-enable-elog +| | Set Test Variable | ${pre_stats} +| | # Trial duration extension for pre_stat action +| | Set Test Variable | ${pre_stats_duration_ext} | ${22.5} +| | # Reduce the rate for pre_stat action +| | Set Test Variable | ${pre_stats_rate} | ${200000} +| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} |