11 files changed, 0 insertions, 255 deletions
diff --git a/resources/libraries/bash/entry/check/job_spec.sh b/resources/libraries/bash/entry/check/job_spec.sh
deleted file mode 100644
index 21013fe984..0000000000
--- a/resources/libraries/bash/entry/check/job_spec.sh
+++ /dev/null
@@ -1,60 +0,0 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-set -exuo pipefail
-
-# This file should be executed from tox, as the assumed working directory
-# is different from where this file is located.
-# This file does not have executable flag nor shebang,
-# to dissuade non-tox callers.
-
-# This script checks if the number of tests in a job specification is the same
-# as declared at the beginning of the file.
-# It counts the lines not starting with '#' so it can also detect redundant
-# empty lines, or lines which should not be in the job specification.
-
-# "set -eu" handles failures from the following two lines.
-BASH_CHECKS_DIR="$(dirname $(readlink -e "${BASH_SOURCE[0]}"))"
-BASH_FUNCTION_DIR="$(readlink -e "${BASH_CHECKS_DIR}/../../function")"
-source "${BASH_FUNCTION_DIR}/common.sh" || {
-    echo "Source failed." >&2
-    exit 1
-}
-
-job_spec_dir="docs/job_specs/"
-rm -f "job_spec.log" || die
-violations=0
-
-# Disabling -x: Following lines are doing too much garbage output.
-set +x
-
-for f in $(find ${job_spec_dir} -type f | grep -v perf_tests_job_specs); do
-    declared=$(fgrep "### tests" $f | tr -dc '0-9')
-    present=$(fgrep -v '#' $f | wc -l)
-    if [ "${declared}" != "${present}" ]; then
-        echo "Wrong number of tests detected in ${f}: \
-declared: ${declared} / present: ${present}" | tee -a job_spec.log
-        violations=$((violations+1))
-    fi
-done
-
-set -x
-
-if [ "${violations}" != "0" ]; then
-    warn
-    warn "Number of tests in job spec checker: FAIL"
-    exit 1
-fi
-
-warn
-warn "Number of tests in job spec checker: PASS"
diff --git a/resources/libraries/bash/shell/tc_naming.sh b/resources/libraries/bash/shell/tc_naming.sh
deleted file mode 100644
index f392ad7b9a..0000000000
--- a/resources/libraries/bash/shell/tc_naming.sh
+++ /dev/null
@@ -1,140 +0,0 @@
-#!/usr/bin/env bash
-
-# Copyright (c) 2021 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-set -xeuo pipefail
-
-# This file should be executed from tox, as the assumend working directory
-# is different from where this file is located.
-# This file does not have executable flag nor shebang,
-# to dissuade non-tox callers.
-
-# "set -eu" handles failures from the following two lines.
-BASH_CHECKS_DIR="$(dirname $(readlink -e "${BASH_SOURCE[0]}"))"
-BASH_FUNCTION_DIR="$(readlink -e "${BASH_CHECKS_DIR}/../../function")"
-source "${BASH_FUNCTION_DIR}/common.sh" || {
-    echo "Source failed." >&2
-    exit 1
-}
-
-# Grep of interest: We want all [0-9]{2,4}B- or IMIX- prefixed.
-# Currently script assumes all variations inside to be part of either
-# auto-generation or not checked at all (VIRL derivates).
-r_grep="([0-9]{2,4}B|IMIX)-"
-# Parse grep of interest (learn path, learn suite, learn testcase name).
-r_parse='(.*)\/(.*).robot.*(([0-9]{2,4}B|IMIX)-.*)'
-
-# CSIT Testcase naming convention rules.
-# https://wiki.fd.io/view/CSIT/csit-test-naming
-# Rules are defined as regular expressions in ordered array and checked in order
-# in a loop, where every iteration is catenated with previous rules. This way we
-# can detect where exactly the naming does not meet criteria and print error
-# from rule string array. This imply that rules are defined in a way of a single
-# string. First rule must start with ^ and last is terminated by $.
-# Rules are written from Left to Right.
-# Bash regular expression logic is used. Once the error is raised the checker is
-# breaked for current Testcase marking the expected fail.
-# One caveat of this solution is that we cannot proceed to check full names now
-# as majority of Testcases does not meet naming criteria.
-s_testc_rules=(
-    'packet size or file size'
-    'core combination'
-    'NIC driver mode'
-    'packet encapsulation on L2 layer'
-    'test type'
-    )
-r_testc_rules=(
-    '^([[:digit:]]{1,4}B|IMIX)-'
-    '([[:digit:]]+c-){0,1}'
-    '(avf-|1lbvpplacp-|2lbvpplacp-){0,1}'
-    '(eth|dot1q|dot1ad)'
-    # TODO: Packet encapsulation (here majority of TC starts failing).
-    #'(ip4|ip6|ip6ip6|icmpv4|icmpv6)'
-    #'(ipsec[[:digit:]]+tnlhw|ipsec[[:digit:]]+tnlsw|'
-    #'srhip6|tcp|udp|lispip6|lispip4|vxlan){0,1}'
-    #'(http){0,1}-'
-    '(.*)-(scapy|ndrpdr|bps|cps|rps|reconf)$'
-    )
-s_suite_rules=(
-    'number of SUT nodes'
-    'NIC card'
-    'NIC driver mode'
-    'packet encapsulation on L2 layer'
-    'test type'
-    )
-r_suite_rules=(
-    '^(2n1l|2n){0,1}-'
-    '(eth2p|10ge2p1x710)-'
-    '(avf-|1lbvpplacp-|2lbvpplacp-){0,1}'
-    '(eth|dot1q|dot1ad)'
-    # TODO: Packet encapsulation (here majority of TC starts failing).
-    #'(ip4|ip6|ip6ip6|icmpv4|icmpv6)'
-    #'(ipsec[[:digit:]]+tnlhw|ipsec[[:digit:]]+tnlsw|'
-    #'srhip6|tcp|udp|lispip6|lispip4|vxlan){0,1}'
-    #'(http){0,1}-'
-    '(.*)-(scapy|ndrpdr|bps|cps|rps|reconf)$'
-    )
-
-rm -f "tc_naming.log" || die
-
-# Disabling -x: Following lines are doing too much garbage output.
-set +x
-
-# Grep interest.
-grep_match=$(grep -RE "${r_grep}" tests/*) || die
-# Extract data from the grep output.
-suites_dirs=($(printf "${grep_match}" | sed -re "s/${r_parse}/\1/")) || die
-suites_names=($(printf "${grep_match}" | sed -re "s/${r_parse}/\2/")) || die
-testcases_names=($(printf "${grep_match}" | sed -re "s/${r_parse}/\3/")) || die
-
-# Naming check.
-total_failed_tc=0
-total_failed_su=0
-for idx in "${!testcases_names[@]}"; do
-    for pass in "${!r_suite_rules[@]}"; do
-        r_rule=$(printf '%s' "${r_suite_rules[@]:1:pass}")
-        if [[ ! "${suites_names[idx]}" =~ ${r_rule} ]]; then
-            msg=""
-            msg+="${suites_dirs[idx]}/${suites_names[idx]} / "
-            msg+="${testcases_names[idx]} ${s_suite_rules[pass]} "
-            msg+="is not matching suite naming rule!"
-            echo "${msg}" | tee -a "tc_naming.log" || die
-            total_failed_su=$((total_failed_su + 1))
-            break
-        fi
-    done
-    for pass in "${!r_testc_rules[@]}"; do
-        r_rule=$(printf '%s' "${r_testc_rules[@]:1:pass}")
-        if [[ ! "${testcases_names[idx]}" =~ ${r_rule} ]]; then
-            msg=""
-            msg+="${suites_dirs[idx]}/${suites_names[idx]} / "
-            msg+="${testcases_names[idx]} ${s_testc_rules[pass]} "
-            msg+="is not matching testcase naming rule!"
-            echo "${msg}" | tee -a "tc_naming.log" || die
-            total_failed_tc=$((total_failed_tc + 1))
-            break
-        fi
-    done
-done
-
-set -x
-
-if [ $((total_failed_tc + total_failed_su)) != "0" ]; then
-    warn
-    warn "Testcase naming checker: FAIL"
-    exit 1
-fi
-
-warn
-warn "Testcase naming checker: PASS"
diff --git a/topologies/available/lf_2n_clx_testbed27.yaml b/topologies/available/lf_2n_clx_testbed27.yaml
index dddc8dd7a6..1bf2aa67a2 100644
--- a/topologies/available/lf_2n_clx_testbed27.yaml
+++ b/topologies/available/lf_2n_clx_testbed27.yaml
@@ -104,11 +104,6 @@ nodes:
     username: testuser
     password: Csit1234
     uio_driver: vfio-pci
-    honeycomb:
-      user: admin
-      passwd: admin
-      port: 8183
-      netconf_port: 2831
     interfaces:
       port1:
         # s33-t27-sut1-c2/p1 - 10GE port1 on Intel NIC x710 4p10GE.
diff --git a/topologies/available/lf_2n_clx_testbed28.yaml b/topologies/available/lf_2n_clx_testbed28.yaml
index ed707dc173..8df00378e0 100644
--- a/topologies/available/lf_2n_clx_testbed28.yaml
+++ b/topologies/available/lf_2n_clx_testbed28.yaml
@@ -104,11 +104,6 @@ nodes:
     username: testuser
     password: Csit1234
     uio_driver: vfio-pci
-    honeycomb:
-      user: admin
-      passwd: admin
-      port: 8183
-      netconf_port: 2831
     interfaces:
       port1:
         # s35-t28-sut1-c2/p1 - 10GE port1 on Intel NIC x710 4p10GE.
diff --git a/topologies/available/lf_2n_clx_testbed29.yaml b/topologies/available/lf_2n_clx_testbed29.yaml
index 39d757a015..1a657f7f49 100644
--- a/topologies/available/lf_2n_clx_testbed29.yaml
+++ b/topologies/available/lf_2n_clx_testbed29.yaml
@@ -104,11 +104,6 @@ nodes:
     username: testuser
     password: Csit1234
     uio_driver: vfio-pci
-    honeycomb:
-      user: admin
-      passwd: admin
-      port: 8183
-      netconf_port: 2831
     interfaces:
       port1:
         # s37-t29-sut1-c2/p1 - 10GE port1 on Intel NIC x710 4p10GE.
diff --git a/topologies/available/lf_2n_skx_testbed21.yaml b/topologies/available/lf_2n_skx_testbed21.yaml
index 5eba0397e7..86a5f3fe24 100644
--- a/topologies/available/lf_2n_skx_testbed21.yaml
+++ b/topologies/available/lf_2n_skx_testbed21.yaml
@@ -104,11 +104,6 @@ nodes:
     username: testuser
     password: Csit1234
     uio_driver: vfio-pci
-    honeycomb:
-      user: admin
-      passwd: admin
-      port: 8183
-      netconf_port: 2831
     interfaces:
       port1:
         # s3-t21-sut1-c2/p1 - 10GE port1 on Intel NIC x710 4p10GE.
diff --git a/topologies/available/lf_2n_skx_testbed22.yaml b/topologies/available/lf_2n_skx_testbed22.yaml
index f048e52486..ee25175946 100644
--- a/topologies/available/lf_2n_skx_testbed22.yaml
+++ b/topologies/available/lf_2n_skx_testbed22.yaml
@@ -104,11 +104,6 @@ nodes:
     username: testuser
     password: Csit1234
     uio_driver: vfio-pci
-    honeycomb:
-      user: admin
-      passwd: admin
-      port: 8183
-      netconf_port: 2831
     interfaces:
       port1:
         # s5-t22-sut1-c2/p1 - 10GE port1 on Intel NIC x710 4p10GE.
diff --git a/topologies/available/lf_2n_skx_testbed23.yaml b/topologies/available/lf_2n_skx_testbed23.yaml
index b62ccc9cf2..cb08cddf7d 100644
--- a/topologies/available/lf_2n_skx_testbed23.yaml
+++ b/topologies/available/lf_2n_skx_testbed23.yaml
@@ -104,11 +104,6 @@ nodes:
     username: testuser
     password: Csit1234
     uio_driver: vfio-pci
-    honeycomb:
-      user: admin
-      passwd: admin
-      port: 8183
-      netconf_port: 2831
     interfaces:
       port1:
         # s7-t23-sut1-c2/p1 - 10GE port1 on Intel NIC x710 4p10GE.
diff --git a/topologies/available/lf_2n_skx_testbed24.yaml b/topologies/available/lf_2n_skx_testbed24.yaml
index 78483c3676..a945fa7e0a 100644
--- a/topologies/available/lf_2n_skx_testbed24.yaml
+++ b/topologies/available/lf_2n_skx_testbed24.yaml
@@ -104,11 +104,6 @@ nodes:
     username: testuser
     password: Csit1234
     uio_driver: vfio-pci
-    honeycomb:
-      user: admin
-      passwd: admin
-      port: 8183
-      netconf_port: 2831
     interfaces:
       port1:
         # s9-t24-sut1-c2/p1 - 10GE port1 on Intel NIC x710 4p10GE.
diff --git a/topologies/available/lf_3n_skx_testbed31.yaml b/topologies/available/lf_3n_skx_testbed31.yaml
index 3706a3baeb..6cb33b6ce0 100644
--- a/topologies/available/lf_3n_skx_testbed31.yaml
+++ b/topologies/available/lf_3n_skx_testbed31.yaml
@@ -104,11 +104,6 @@ nodes:
     username: testuser
     password: Csit1234
     uio_driver: vfio-pci
-    honeycomb:
-      user: admin
-      passwd: admin
-      port: 8183
-      netconf_port: 2831
     interfaces:
       port1:
         # s11-t31-sut1-c2/p1 - 10GE port1 on Intel NIC x710 4p10GE.
@@ -166,11 +161,6 @@ nodes:
     username: testuser
     password: Csit1234
     uio_driver: vfio-pci
-    honeycomb:
-      user: admin
-      passwd: admin
-      port: 8183
-      netconf_port: 2831
     interfaces:
       port1:
         # s12-t31-sut1-c2/p1 - 10GE port1 on Intel NIC x710 4p10GE.
diff --git a/topologies/available/lf_3n_skx_testbed32.yaml b/topologies/available/lf_3n_skx_testbed32.yaml
index bfb38fa4a2..206b469b90 100644
--- a/topologies/available/lf_3n_skx_testbed32.yaml
+++ b/topologies/available/lf_3n_skx_testbed32.yaml
@@ -104,11 +104,6 @@ nodes:
     username: testuser
     password: Csit1234
     uio_driver: vfio-pci
-    honeycomb:
-      user: admin
-      passwd: admin
-      port: 8183
-      netconf_port: 2831
     interfaces:
       port1:
         # s14-t32-sut1-c2/p1 - 10GE port1 on Intel NIC x710 4p10GE.
@@ -166,11 +161,6 @@ nodes:
     username: testuser
     password: Csit1234
     uio_driver: vfio-pci
-    honeycomb:
-      user: admin
-      passwd: admin
-      port: 8183
-      netconf_port: 2831
     interfaces:
       port1:
         # s15-t32-sut1-c2/p1 - 10GE port1 on Intel NIC x710 4p10GE.