diff options
680 files changed, 17033 insertions, 13647 deletions
diff --git a/resources/libraries/bash/function/docs.sh b/resources/libraries/bash/function/docs.sh index c589416a37..cb3f36d21a 100644 --- a/resources/libraries/bash/function/docs.sh +++ b/resources/libraries/bash/function/docs.sh @@ -89,6 +89,9 @@ function generate_docs () { die "rSync failed!" } + # to remove GPL licence section + find "${WORKING_DIR}/tests/" -type f -exec sed -i '/\*\*\*/,$!d' {} \; + find ${WORKING_DIR}/ -type d -exec echo {} \; -exec touch {}/__init__.py \; python3 gen_rst.py || die "Generate .rst files failed!" diff --git a/resources/libraries/python/Constants.py b/resources/libraries/python/Constants.py index c6c9bcaf05..c14ba31c57 100644 --- a/resources/libraries/python/Constants.py +++ b/resources/libraries/python/Constants.py @@ -428,23 +428,24 @@ class Constants: } PERF_TYPE_TO_SUITE_DOC_VER = { - u"mrr": u'''fication:* In MaxReceivedRate tests TG sends traffic\\ -| ... | at line rate and reports total received packets over trial period.\\''', - u"ndrpdr": u'''ication:* TG finds and reports throughput NDR (Non Drop\\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\\ -| ... | of packets transmitted. NDR and PDR are discovered for different\\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\\''', - u"soak": u'''fication:* TG sends traffic at dynamically computed\\ -| ... | rate as PLRsearch algorithm gathers data and improves its estimate\\ -| ... | of a rate at which a prescribed small fraction of packets\\ -| ... | would be lost. After set time, the serarch stops\\ -| ... | and the algorithm reports its current estimate.\\''', + u"mrr": u'''fication:** In MaxReceivedRate tests TG sends traffic at \\ +| ... | line rate and reports total received packets over trial period. \\''', + u"ndrpdr": u'''rification:** TG finds and reports throughput NDR (Non \\ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \\ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \\ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \\ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \\ +| ... | library.''', + u"soak": u'''rification:** TG sends traffic at dynamically computed \\ +| ... | rate as PLRsearch algorithm gathers data and improves its estimate \\ +| ... | of a rate at which a prescribed small fraction of packets \\ +| ... | would be lost. After set time, the serarch stops \\ +| ... | and the algorithm reports its current estimate. \\''', } PERF_TYPE_TO_TEMPLATE_DOC_VER = { - u"mrr": u'''Measure MaxReceivedRate for ${frame_size}B frames\\ -| | ... | using burst trials throughput test.\\''', - u"ndrpdr": u"Measure NDR and PDR values using MLRsearch algorithm.\\", - u"soak": u"Estimate critical rate using PLRsearch algorithm.\\", + u"mrr": u'''Measure MaxReceivedRate for ${frame_size}B frames \\ +| | ... | using burst trials throughput test. \\''', + u"ndrpdr": u"Measure NDR and PDR values using MLRsearch algorithm.", + u"soak": u"Estimate critical rate using PLRsearch algorithm. \\", } diff --git a/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot b/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot index b556c7f1af..c808d4f148 100644 --- a/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot +++ b/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot @@ -27,22 +27,27 @@ | | Test Template | Local Template | -| Documentation | *Raw results L2 routing test cases* -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 frame forwarding. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK testpmd\ -| ... | application and use the io forwarding mode. DUT1 and DUT2 tested with\ -| ... | ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header,IPv4 header with static payload.\ +| Documentation | **Raw results L2 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 frame forwarding. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 run the DPDK testpmd \ +| ... | application and use the io forwarding mode. DUT1 and DUT2 are tested \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all \ +| ... | packets containing Ethernet header, IPv4 header with static payload \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. *** Variables *** @@ -61,9 +66,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config.\ +| | ... | - **[Cfg]** DUT runs L2 frame forwarding config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} | | diff --git a/tests/dpdk/perf/10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot b/tests/dpdk/perf/10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot index ea4483fcd1..a99a7f6be2 100644 --- a/tests/dpdk/perf/10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot +++ b/tests/dpdk/perf/10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot @@ -27,22 +27,27 @@ | | Test Template | Local Template | -| Documentation | *Raw results IPv4 routing test cases* -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L3 IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK l3fwd application\ -| ... | DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 253 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| Documentation | **Raw results IPv4 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L3 IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 run the DPDK l3fwd \ +| ... | application. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 253 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. *** Variables *** @@ -61,9 +66,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config.\ +| | ... | - **[Cfg]** DUT runs L3 IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} | | diff --git a/tests/dpdk/perf/2n1l-10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot b/tests/dpdk/perf/2n1l-10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot index aa62fe54fb..467db2ece8 100644 --- a/tests/dpdk/perf/2n1l-10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot +++ b/tests/dpdk/perf/2n1l-10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot @@ -27,22 +27,27 @@ | | Test Template | Local Template | -| Documentation | *Raw results L2 routing test cases* -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **Raw results L2 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 frame forwarding. -| ... | *[Cfg] DUT configuration:* DUT1 run the DPDK testpmd\ -| ... | application and use the io forwarding mode. DUT1 tested with\ -| ... | ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header,IPv4 header with static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 frame forwarding. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 run the DPDK testpmd \ +| ... | application and use the io forwarding mode. DUT1 tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all \ +| ... | packets containing Ethernet header, IPv4 header with static payload \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. *** Variables *** @@ -61,9 +66,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config.\ +| | ... | - **[Cfg]** DUT runs L2 frame forwarding config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} | | diff --git a/tests/dpdk/perf/2n1l-10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot b/tests/dpdk/perf/2n1l-10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot index fe9734a036..ce96f2f459 100644 --- a/tests/dpdk/perf/2n1l-10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot +++ b/tests/dpdk/perf/2n1l-10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot @@ -27,22 +27,27 @@ | | Test Template | Local Template | -| Documentation | *Raw results IPv4 routing test cases* -| ... | *[Top] Network Topologies:* TG-DUT1-TG 3-node circular topology\ +| Documentation | **Raw results IPv4 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 3-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L3 IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 run the DPDK l3fwd application\ -| ... | DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 253 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L3 IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 run the DPDK l3fwd application \ +| ... | DUT1 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 253 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. *** Variables *** @@ -61,9 +66,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config.\ +| | ... | - **[Cfg]** DUT runs L3 IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} | | diff --git a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4-ip4base-tg-ndrpdr.robot b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4-ip4base-tg-ndrpdr.robot index 02fd57724f..76d483940b 100644 --- a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4-ip4base-tg-ndrpdr.robot +++ b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4-ip4base-tg-ndrpdr.robot @@ -25,23 +25,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput for cross connected NICs with IPv4 -| ... | traffic profile. -| -| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology\ +| Documentation | **RFC2544: Pkt throughput for cross connected NICs with \ +| ... | IPv4 traffic profile.** +| ... | +| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L1 cross connect patch. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to TG.\ -| ... | TG traffic profile contains two L3 flow-groups (flow-group per\ -| ... | direction, 254 flows per flow-group) with all packets containing\ -| ... | Ethernet header, IPv4 header with static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L1 cross connect patch. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to TG. \ +| ... | TG traffic profile contains two L3 flow-groups (flow-group per \ +| ... | direction, 254 flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with static payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | ${nic_name}= | Intel-X710 @@ -54,8 +58,8 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] TG runs L1 cross connect config. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** TG runs L1 cross connect config. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4-ip4scale2m-tg-ndrpdr.robot b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4-ip4scale2m-tg-ndrpdr.robot index 03a93c6425..0d7ae91a08 100644 --- a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4-ip4scale2m-tg-ndrpdr.robot +++ b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4-ip4scale2m-tg-ndrpdr.robot @@ -25,23 +25,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput for cross connected NICs with IPv4 -| ... | traffic profile. -| -| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology\ +| Documentation | **RFC2544: Pkt throughput for cross connected NICs with \ +| ... | IPv4 traffic profile.** +| ... | +| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \ | ... | with single links between. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L1 cross connect patch. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to TG.\ -| ... | TG traffic profile contains two L3 flow-groups (flow-group per\ -| ... | direction, 1M flows per flow-group) with all packets containing\ -| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L1 cross connect patch. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to TG. \ +| ... | TG traffic profile contains two L3 flow-groups (flow-group per \ +| ... | direction, 1M flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | ${nic_name}= | Intel-X710 @@ -55,8 +59,8 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] TG runs L1 cross connect config. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** TG runs L1 cross connect config. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-cps-tg-ndrpdr.robot b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-cps-tg-ndrpdr.robot index 65ef2547f5..5de14432d1 100644 --- a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-cps-tg-ndrpdr.robot +++ b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-cps-tg-ndrpdr.robot @@ -26,22 +26,26 @@ | | Test Template | Local Template | -| Documentation | *CPS on empty TCP transactions with L1 cross connect* -| -| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology\ +| Documentation | **CPS on empty TCP transactions with L1 cross connect** +| ... | +| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L1 cross connect patch. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to TG.\ -| ... | TG traffic profile contain L7 flows (${cps} bi-directional TCP flows)\ -| ... | with all packets containing Ethernet header, IPv4 header with TCP\ -| ... | header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L1 cross connect patch. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to TG. \ +| ... | TG traffic profile contain L7 flows (${cps} bi-directional TCP flows) \ +| ... | with all packets containing Ethernet header, IPv4 header with TCP \ +| ... | header and static payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | ${nic_name}= | Intel-X710 @@ -62,8 +66,8 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] TG runs L1 cross connect config. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** TG runs L1 cross connect config. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr.robot b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr.robot index 0775768f21..6fa25a50ca 100644 --- a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr.robot +++ b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr.robot @@ -26,22 +26,26 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *PPS on lightweight TCP transactions with L1 cross connect* -| -| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology\ +| Documentation | **PPS on lightweight TCP transactions with L1 cross connect** +| ... | +| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L1 cross connect patch. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to TG.\ -| ... | TG traffic profile contains client and server ASTF programs,\ -| ... | generating packets containing Ethernet header, IPv4 header,\ -| ... | TCP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L1 cross connect patch. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to TG. \ +| ... | TG traffic profile contains client and server ASTF programs, \ +| ... | generating packets containing Ethernet header, IPv4 header, \ +| ... | TCP header and static payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | ${nic_name}= | Intel-X710 @@ -61,8 +65,8 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] TG runs L1 cross connect config. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** TG runs L1 cross connect config. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-cps-tg-ndrpdr.robot b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-cps-tg-ndrpdr.robot index 64a5a883c6..66ef7e8fe5 100644 --- a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-cps-tg-ndrpdr.robot +++ b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-cps-tg-ndrpdr.robot @@ -25,22 +25,26 @@ | | Test Template | Local Template | -| Documentation | *CPS on empty TCP transactions with L1 cross connect* -| -| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology\ +| Documentation | **CPS on empty TCP transactions with L1 cross connect** +| ... | +| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L1 cross connect patch. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to TG.\ -| ... | TG traffic profile contain L7 flows (${cps} bi-directional TCP flows)\ -| ... | with all packets containing Ethernet header, IPv4 header with TCP\ -| ... | header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L1 cross connect patch. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to TG. \ +| ... | TG traffic profile contain L7 flows (${cps} bi-directional TCP flows) \ +| ... | with all packets containing Ethernet header, IPv4 header with TCP \ +| ... | header and static payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | ${nic_name}= | Intel-X710 @@ -61,8 +65,8 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] TG runs L1 cross connect config. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** TG runs L1 cross connect config. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr.robot b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr.robot index 23c3409462..afed63333f 100644 --- a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr.robot +++ b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr.robot @@ -26,22 +26,26 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *PPS on lightweight TCP transactions with L1 cross connect* -| -| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology\ +| Documentation | **PPS on lightweight TCP transactions with L1 cross connect** +| ... | +| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L1 cross connect patch. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to TG.\ -| ... | TG traffic profile contains client and server ASTF programs,\ -| ... | generating packets containing Ethernet header, IPv4 header,\ -| ... | TCP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L1 cross connect patch. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to TG. \ +| ... | TG traffic profile contains client and server ASTF programs, \ +| ... | generating packets containing Ethernet header, IPv4 header, \ +| ... | TCP header and static payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | ${nic_name}= | Intel-X710 @@ -61,8 +65,8 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] TG runs L1 cross connect config. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** TG runs L1 cross connect config. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-cps-tg-ndrpdr.robot b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-cps-tg-ndrpdr.robot index 81ac720576..d73bd9b044 100644 --- a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-cps-tg-ndrpdr.robot +++ b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-cps-tg-ndrpdr.robot @@ -25,22 +25,26 @@ | | Test Template | Local Template | -| Documentation | *CPS on empty UDP transactions with L1 cross connect* -| -| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology\ +| Documentation | **CPS on empty UDP transactions with L1 cross connect** +| ... | +| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L1 cross connect patch. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to TG.\ -| ... | TG traffic profile contain L7 flows (${cps} bi-directional UDP flows)\ -| ... | with all packets containing Ethernet header, IPv4 header with UDP\ -| ... | header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L1 cross connect patch. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to TG. \ +| ... | TG traffic profile contain L7 flows (${cps} bi-directional UDP flows) \ +| ... | with all packets containing Ethernet header, IPv4 header with UDP \ +| ... | header and static payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | ${nic_name}= | Intel-X710 @@ -59,8 +63,8 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] TG runs L1 cross connect config. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** TG runs L1 cross connect config. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr.robot b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr.robot index 7083840c79..bbf66e06b6 100644 --- a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr.robot +++ b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr.robot @@ -26,22 +26,26 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *PPS on lightweight UDP transactions with L1 cross connect* -| -| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology\ +| Documentation | **PPS on lightweight UDP transactions with L1 cross connect** +| ... | +| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L1 cross connect patch. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to TG.\ -| ... | TG traffic profile contains client and server ASTF programs,\ -| ... | generating packets containing Ethernet header, IPv4 header,\ -| ... | UDP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L1 cross connect patch. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to TG. \ +| ... | TG traffic profile contains client and server ASTF programs, \ +| ... | generating packets containing Ethernet header, IPv4 header, \ +| ... | UDP header and static payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | ${nic_name}= | Intel-X710 @@ -61,8 +65,8 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] TG runs L1 cross connect config. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** TG runs L1 cross connect config. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-cps-tg-ndrpdr.robot b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-cps-tg-ndrpdr.robot index 42cdadc9c5..41d49315be 100644 --- a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-cps-tg-ndrpdr.robot +++ b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-cps-tg-ndrpdr.robot @@ -25,22 +25,26 @@ | | Test Template | Local Template | -| Documentation | *CPS on empty UDP transactions with L1 cross connect* -| -| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology\ +| Documentation | **CPS on empty UDP transactions with L1 cross connect** +| ... | +| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L1 cross connect patch. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to TG.\ -| ... | TG traffic profile contain L7 flows (${cps} bi-directional UDP flows)\ -| ... | with all packets containing Ethernet header, IPv4 header with UDP\ -| ... | header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L1 cross connect patch. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to TG. \ +| ... | TG traffic profile contain L7 flows (${cps} bi-directional UDP flows) \ +| ... | with all packets containing Ethernet header, IPv4 header with UDP \ +| ... | header and static payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | ${nic_name}= | Intel-X710 @@ -59,8 +63,8 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] TG runs L1 cross connect config. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** TG runs L1 cross connect config. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr.robot b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr.robot index 2fd9640e83..ecb48413cc 100644 --- a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr.robot +++ b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr.robot @@ -25,22 +25,26 @@ | | Test Template | Local Template | -| Documentation | *PPS on lightweight UDP transactions with L1 cross connect* -| -| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology\ +| Documentation | **PPS on lightweight UDP transactions with L1 cross connect** +| ... | +| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L1 cross connect patch. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to TG.\ -| ... | TG traffic profile contains client and server ASTF programs,\ -| ... | generating packets containing Ethernet header, IPv4 header,\ -| ... | TCP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L1 cross connect patch. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to TG. \ +| ... | TG traffic profile contains client and server ASTF programs, \ +| ... | generating packets containing Ethernet header, IPv4 header, \ +| ... | TCP header and static payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | ${nic_name}= | Intel-X710 @@ -60,8 +64,8 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] TG runs L1 cross connect config. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** TG runs L1 cross connect config. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/trex/perf/ip6/1n1l-10ge2p1x710-ethip6-ip6base-tg-ndrpdr.robot b/tests/trex/perf/ip6/1n1l-10ge2p1x710-ethip6-ip6base-tg-ndrpdr.robot index 9ee49f8ff8..9788baadac 100644 --- a/tests/trex/perf/ip6/1n1l-10ge2p1x710-ethip6-ip6base-tg-ndrpdr.robot +++ b/tests/trex/perf/ip6/1n1l-10ge2p1x710-ethip6-ip6base-tg-ndrpdr.robot @@ -25,23 +25,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput for cross connected NICs with IPv6 -| ... | traffic profile. -| -| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology\ +| Documentation | **RFC2544: Pkt throughput for cross connected NICs with IPv6 \ +| ... | traffic profile.** +| ... | +| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \ | ... | with single link between. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for L1 cross connect patch. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to TG.\ -| ... | TG traffic profile contains two L3 flow-groups (flow-group per\ -| ... | direction, 1M flows per flow-group) with all packets containing\ -| ... | Ethernet header, IPv6 header with static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for L1 cross connect patch. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to TG. \ +| ... | TG traffic profile contains two L3 flow-groups (flow-group per \ +| ... | direction, 1M flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv6 header with static payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | ${nic_name}= | Intel-X710 @@ -54,8 +58,8 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] TG runs L1 cross connect config. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** TG runs L1 cross connect config. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/trex/perf/ip6/1n1l-10ge2p1x710-ethip6-ip6scale2m-tg-ndrpdr.robot b/tests/trex/perf/ip6/1n1l-10ge2p1x710-ethip6-ip6scale2m-tg-ndrpdr.robot index b0ccc1e4a3..fcdcfead7f 100644 --- a/tests/trex/perf/ip6/1n1l-10ge2p1x710-ethip6-ip6scale2m-tg-ndrpdr.robot +++ b/tests/trex/perf/ip6/1n1l-10ge2p1x710-ethip6-ip6scale2m-tg-ndrpdr.robot @@ -25,23 +25,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput for cross connected NICs with IPv6 -| ... | traffic profile. -| -| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology +| Documentation | **RFC2544: Pkt throughput for cross connected NICs with IPv6 \ +| ... | traffic profile.** +| ... | +| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \ | ... | with single link between. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for L1 cross connect patch. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to TG.\ -| ... | TG traffic profile contains two L3 flow-groups (flow-group per\ -| ... | direction, 254 flows per flow-group) with all packets containing\ -| ... | Ethernet header, IPv6 header with static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for L1 cross connect patch. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to TG. \ +| ... | TG traffic profile contains two L3 flow-groups (flow-group per \ +| ... | direction, 254 flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv6 header with static payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | ${nic_name}= | Intel-X710 @@ -55,8 +59,8 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] TG runs L1 cross connect config. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** TG runs L1 cross connect config. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/trex/perf/l2/1n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-tg-ndrpdr.robot b/tests/trex/perf/l2/1n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-tg-ndrpdr.robot index f34b07d693..ed89f95fea 100644 --- a/tests/trex/perf/l2/1n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-tg-ndrpdr.robot +++ b/tests/trex/perf/l2/1n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-tg-ndrpdr.robot @@ -25,27 +25,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput for cross connected NICs with IPv4 -| ... | traffic profile. -| -| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology\ +| Documentation | **RFC2544: Pkt throughput for cross connected NICs with \ +| ... | IPv4 traffic profile.** +| ... | +| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \ | ... | with single link between. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L1 cross connect patch. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to TG.\ -| ... | TG traffic profile contains two L3 flow-groups (flow-group per\ -| ... | direction, 500k flows per flow-group) with all packets containing\ -| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L1 cross connect patch. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to TG. \ +| ... | TG traffic profile contains two L3 flow-groups (flow-group per \ +| ... | direction, 500k flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ | ... | MAC addresses ranges are incremented as follows: | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | ${nic_name}= | Intel-X710 @@ -58,8 +62,8 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] TG runs L1 cross connect config. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** TG runs L1 cross connect config. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-scapy.robot b/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-scapy.robot index ffb12e1bbb..0ae1ecb776 100644 --- a/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-scapy.robot +++ b/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-scapy.robot @@ -25,20 +25,25 @@ | | Test Template | Local Template | -| Documentation | *IPv4 routing test cases with memif interface* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \ -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing on both links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \ -| ... | two static IPv4 /24 route entries. Container is connected to VPP via \ -| ... | Memif interface. Container is running same VPP version as running on \ -| ... | DUT. -| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61 are \ +| Documentation | **IPv4 routing test cases with memif interface** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing on both \ +| ... | links. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and two static IPv4 /24 route entries. Container is connected to VPP \ +| ... | via Memif interface. Container is running same VPP version as running \ +| ... | on DUT. +| ... | +| ... | - **[Ver] TG verification:** Test IPv4 packets with IP protocol=61 are \ | ... | sent in one direction by TG on links to DUT1 and via container; on \ | ... | receive TG verifies packets for correctness and their IPv4 src-addr, \ | ... | dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792 +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC791, RFC826, RFC792 *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -59,8 +64,8 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IPv4 packet in both directions between two\ -| | ... | of its interfaces to be routed by DUT to and from docker; verify\ +| | ... | - **[Ver]** Make TG send IPv4 packet in both directions between two \ +| | ... | of its interfaces to be routed by DUT to and from docker; verify \ | | ... | all packets are received. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2memif-1dcr-scapy.robot b/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2memif-1dcr-scapy.robot index fdcea357ef..5b2c0a8747 100644 --- a/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2memif-1dcr-scapy.robot +++ b/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2memif-1dcr-scapy.robot @@ -25,20 +25,24 @@ | | Test Template | Local Template | -| Documentation | *L2 bridge-domain test cases with memif interface* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \ +| Documentation | **L2 bridge-domain test cases with memif interface** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ | ... | Both apply to all links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain \ -| ... | switching. Container is connected to VPP via Memif interface. \ -| ... | Container is running same VPP version as running on DUT. -| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \ +| ... | bridge-domain switching. Container is connected to VPP via Memif \ +| ... | interface. Container is running same VPP version as running on DUT. +| ... | +| ... | - **[Ver] TG verification:** Test IPv4 packets with IP protocol=61 \ | ... | are sent in both directions by TG on links to DUT1 and via container; \ -| ... | on receive TG verifies packets for correctness and their IPv4 \ +| ... | on receive TG verifies packets for correctness and their IPv4. \ | ... | src-addr, dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC792 +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC792 *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -59,8 +63,8 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IPv4 packets in both directions between two\ -| | ... | of its interfaces to be switched by DUT to and from docker; verify\ +| | ... | - **[Ver]** Make TG send IPv4 packets in both directions between two \ +| | ... | of its interfaces to be switched by DUT to and from docker; verify \ | | ... | all packets are received. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2memif-1dcr-scapy.robot b/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2memif-1dcr-scapy.robot index 1d09d87762..82e9264b4b 100644 --- a/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2memif-1dcr-scapy.robot +++ b/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2memif-1dcr-scapy.robot @@ -25,19 +25,23 @@ | | Test Template | Local Template | -| Documentation | *L2 cross-connect test cases with memif interface* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \ -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect \ -| ... | (L2XC) switching. Container is connected to VPP via Memif interface. \ -| ... | Container is running same VPP version as running on DUT. -| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61 \ +| Documentation | **L2 cross-connect test cases with memif interface** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 cross-\ +| ... | connect (L2XC) switching. Container is connected to VPP via Memif \ +| ... | interface. Container is running same VPP version as running on DUT. +| ... | +| ... | - **[Ver] TG verification:** Test IPv4 packets with IP protocol=61 \ | ... | are sent in both directions by TG on links to DUT1 and via container; \ -| ... | on receive TG verifies packets for correctness and their IPv4 \ +| ... | on receive TG verifies packets for correctness and their IPv4. \ | ... | src-addr, dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC792 +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC792 *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -58,8 +62,8 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IPv4 packets in both directions between two\ -| | ... | of its interfaces to be switched by DUT to and from docker; verify\ +| | ... | - **[Ver]** Make TG send IPv4 packets in both directions between two \ +| | ... | of its interfaces to be switched by DUT to and from docker; verify \ | | ... | all packets are received. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec11tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.robot b/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec11tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.robot index e150c59c12..d2db9b0ef0 100644 --- a/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec11tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.robot +++ b/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec11tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.robot @@ -26,16 +26,19 @@ | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode test suite.* -| -| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| Documentation | **IPv4 IPsec tunnel mode test suite.** +| ... | +| ... | - **[Top] Network topologies:** TG-DUT1 2-node topology with one link \ | ... | between nodes. -| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure\ -| ... | loopback an physical interface IPv4 addresses, static ARP record, route\ -| ... | and IPsec manual keyed connection in tunnel mode. -| ... | *[Ver] TG verification:* ETH-IP4 packet is sent from TG to DUT1. Packet\ -| ... | is received on TG from DUT1. -| ... | *[Ref] Applicable standard specifications:* RFC4303. +| ... | +| ... | - **[Cfg] DUT configuration:** On DUT1 create loopback interface, \ +| ... | configure loopback an physical interface IPv4 addresses, static ARP \ +| ... | record, route and IPsec manual keyed connection in tunnel mode. +| ... | +| ... | - **[Ver] TG verification:** ETH-IP4 packet is sent from TG to DUT1. \ +| ... | Packet is received on TG from DUT1. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -63,9 +66,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] On DUT1 configure IPsec tunnel interfaces with encryption\ -| | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in tunnel\ -| | ... | mode. +| | ... | - **[Cfg]** On DUT1 configure IPsec tunnel interfaces with \ +| | ... | encryption algorithm AES_128_CBC and integrity algorithm \ +| | ... | HMAC_SHA_512 in tunnel mode. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer. Type: integer diff --git a/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.robot b/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.robot index 5756fa7185..cf13223b0b 100644 --- a/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.robot +++ b/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.robot @@ -26,16 +26,19 @@ | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode test suite.* -| -| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| Documentation | **IPv4 IPsec tunnel mode test suite.** +| ... | +| ... | - **[Top] Network topologies:** TG-DUT1 2-node topology with one link \ | ... | between nodes. -| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure\ -| ... | loopback an physical interface IPv4 addresses, static ARP record, route\ -| ... | and IPsec manual keyed connection in tunnel mode. -| ... | *[Ver] TG verification:* ETH-IP4 packet is sent from TG to DUT1. Packet\ -| ... | is received on TG from DUT1. -| ... | *[Ref] Applicable standard specifications:* RFC4303. +| ... | +| ... | - **[Cfg] DUT configuration:** On DUT1 create loopback interface, \ +| ... | configure loopback an physical interface IPv4 addresses, static ARP \ +| ... | irecord, route and IPsec manual keyed connection in tunnel mode. +| ... | +| ... | - **[Ver] TG verification:** ETH-IP4 packet is sent from TG to DUT1. \ +| ... | Packet is received on TG from DUT1. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -63,9 +66,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] On DUT1 configure IPsec tunnel interface with encryption\ -| | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in tunnel\ -| | ... | mode. +| | ... | - **[Cfg]** On DUT1 configure IPsec tunnel interface with encryption \ +| | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in \ +| | ... | tunnel mode. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer. Type: integer diff --git a/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-scapy.robot b/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-scapy.robot index ca55d02240..b07545e08d 100644 --- a/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-scapy.robot +++ b/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-scapy.robot @@ -26,16 +26,19 @@ | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode test suite.* -| -| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| Documentation | **IPv4 IPsec tunnel mode test suite.** +| ... | +| ... | - **[Top] Network topologies:** TG-DUT1 2-node topology with one link \ | ... | between nodes. -| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure\ -| ... | loopback an physical interface IPv4 addresses, static ARP record, route\ -| ... | and IPsec manual keyed connection in tunnel mode. -| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet\ -| ... | is received on TG from DUT1. -| ... | *[Ref] Applicable standard specifications:* RFC4303. +| ... | +| ... | - **[Cfg] DUT configuration:** On DUT1 create loopback interface, \ +| ... | configure loopback an physical interface IPv4 addresses, static ARP \ +| ... | record, route and IPsec manual keyed connection in tunnel mode. +| ... | +| ... | - **[Ver] TG verification:** ESP packet is sent from TG to DUT1. ESP \ +| ... | packet is received on TG from DUT1. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -64,9 +67,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in tunnel\ -| | ... | mode. +| | ... | - **[Cfg]** On DUT1 configure IPsec manual keyed connection with \ +| | ... | encryption algorithm AES_128_CBC and integrity algorithm \ +| | ... | HMAC_SHA_512 in tunnel mode. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer. Type: integer diff --git a/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tptsw-ip4base-policy-aes128cbc-hmac512sha-scapy.robot b/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tptsw-ip4base-policy-aes128cbc-hmac512sha-scapy.robot index 234afe597a..84aaa7cd3b 100644 --- a/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tptsw-ip4base-policy-aes128cbc-hmac512sha-scapy.robot +++ b/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tptsw-ip4base-policy-aes128cbc-hmac512sha-scapy.robot @@ -26,16 +26,19 @@ | | Test Template | Local Template | -| Documentation | *IPv4 IPsec transport mode test suite.* -| -| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| Documentation | **IPv4 IPsec transport mode test suite.** +| ... | +| ... | - **[Top] Network topologies:** TG-DUT1 2-node topology with one link \ | ... | between nodes. -| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure\ -| ... | loopback an physical interface IPv4 addresses, static ARP record, route\ -| ... | and IPsec manual keyed connection in transport mode. -| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet\ -| ... | is received on TG from DUT1. -| ... | *[Ref] Applicable standard specifications:* RFC4303. +| ... | +| ... | - **[Cfg] DUT configuration:** On DUT1 create loopback interface, \ +| ... | configure loopback an physical interface IPv4 addresses, static ARP \ +| ... | record, route and IPsec manual keyed connection in transport mode. +| ... | +| ... | - **[Ver] TG verification:** ESP packet is sent from TG to DUT1. ESP \ +| ... | packet is received on TG from DUT1. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -64,9 +67,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in\ -| | ... | transport mode. +| | ... | - **[Cfg]** On DUT1 configure IPsec manual keyed connection with \ +| | ... | encryption algorithm AES_128_CBC and integrity algorithm \ +| | ... | HMAC_SHA_512 in transport mode. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer. Type: integer diff --git a/tests/vpp/device/crypto/ethip6/2n1l-10ge2p1x710-ethip6ipsec1tnlsw-ip6base-policy-aes128cbc-hmac512sha-scapy.robot b/tests/vpp/device/crypto/ethip6/2n1l-10ge2p1x710-ethip6ipsec1tnlsw-ip6base-policy-aes128cbc-hmac512sha-scapy.robot index c8e71996ca..80f557aedd 100644 --- a/tests/vpp/device/crypto/ethip6/2n1l-10ge2p1x710-ethip6ipsec1tnlsw-ip6base-policy-aes128cbc-hmac512sha-scapy.robot +++ b/tests/vpp/device/crypto/ethip6/2n1l-10ge2p1x710-ethip6ipsec1tnlsw-ip6base-policy-aes128cbc-hmac512sha-scapy.robot @@ -26,16 +26,19 @@ | | Test Template | Local Template | -| Documentation | *IPv6 IPsec tunnel mode test suite.* -| -| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| Documentation | **IPv6 IPsec tunnel mode test suite.** +| ... | +| ... | - **[Top] Network topologies:** TG-DUT1 2-node topology with one link \ | ... | between nodes. -| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure -| ... | loopback an physical interface IPv6 addresses, static ARP record, route -| ... | and IPsec manual keyed connection in tunnel mode. -| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet -| ... | is received on TG from DUT1. -| ... | *[Ref] Applicable standard specifications:* RFC4303. +| ... | +| ... | - **[Cfg] DUT configuration:** On DUT1 create loopback interface, \ +| ... | configure loopback an physical interface IPv6 addresses, static ARP \ +| ... | record, route and IPsec manual keyed connection in tunnel mode. +| ... | +| ... | - **[Ver] TG verification:** ESP packet is sent from TG to DUT1. ESP \ +| ... | packet is received on TG from DUT1. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -65,9 +68,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in tunnel\ -| | ... | mode. +| | ... | - **[Cfg]** On DUT1 configure IPsec manual keyed connection with \ +| | ... | encryption algorithm AES_128_CBC and integrity algorithm \ +| | ... | HMAC_SHA_512 in tunnel mode. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer. Type: integer diff --git a/tests/vpp/device/crypto/ethip6/2n1l-10ge2p1x710-ethip6ipsec1tptsw-ip6base-policy-aes128cbc-hmac512sha-scapy.robot b/tests/vpp/device/crypto/ethip6/2n1l-10ge2p1x710-ethip6ipsec1tptsw-ip6base-policy-aes128cbc-hmac512sha-scapy.robot index 35fb82e91d..e195212db4 100644 --- a/tests/vpp/device/crypto/ethip6/2n1l-10ge2p1x710-ethip6ipsec1tptsw-ip6base-policy-aes128cbc-hmac512sha-scapy.robot +++ b/tests/vpp/device/crypto/ethip6/2n1l-10ge2p1x710-ethip6ipsec1tptsw-ip6base-policy-aes128cbc-hmac512sha-scapy.robot @@ -26,16 +26,19 @@ | | Test Template | Local Template | -| Documentation | *IPv6 IPsec transport mode test suite.* -| -| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| Documentation | **IPv6 IPsec transport mode test suite.** +| ... | +| ... | - **[Top] Network topologies:** TG-DUT1 2-node topology with one link \ | ... | between nodes. -| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure -| ... | loopback an physical interface IPv6 addresses, static ARP record, route -| ... | and IPsec manual keyed connection in transport mode. -| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet -| ... | is received on TG from DUT1. -| ... | *[Ref] Applicable standard specifications:* RFC4303. +| ... | +| ... | - **[Cfg] DUT configuration:** On DUT1 create loopback interface, \ +| ... | configure loopback an physical interface IPv6 addresses, static ARP \ +| ... | record, route and IPsec manual keyed connection in transport mode. +| ... | +| ... | - **[Ver] TG verification:** ESP packet is sent from TG to DUT1. ESP \ +| ... | packet is received on TG from DUT1. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -65,9 +68,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in\ -| | ... | transport mode. +| | ... | - **[Cfg]** On DUT1 configure IPsec manual keyed connection with \ +| | ... | encryption algorithm AES_128_CBC and integrity algorithm \ +| | ... | HMAC_SHA_512 in transport mode. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer. Type: integer diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-gtpu-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-gtpu-scapy.robot index 0b8e44ade6..090bcefd1d 100644 --- a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-gtpu-scapy.robot +++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-gtpu-scapy.robot @@ -25,13 +25,17 @@ | | Test Template | Local Template | -| Documentation | *IP4_GTPU flow test cases* +| Documentation | **IP4_GTPU flow test cases** | ... -| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\ +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1 2-node topology with one link \ | ... | between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IP4-GTPU. -| ... | *[Cfg] DUT configuration:* DUT is configured with IP4_GTPU flow. -| ... | *[Ver] TG verification:* Verify if the flow action is correct. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IP4-GTPU. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT is configured with IP4_GTPU flow. +| ... | +| ... | - **[Ver] TG verification:** Verify if the flow action is correct. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -53,8 +57,8 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IP4-GTPU packet routed over DUT1 interfaces.\ -| | ... | Make VPP verify flow packet is correct. +| | ... | - **[Ver]** Make TG send IP4-GTPU packet routed over DUT1 \ +| | ... | interfaces. Make VPP verify flow packet is correct. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer. Type: integer diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ipsec-ah-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ipsec-ah-scapy.robot index 64829d914f..fd65ce4752 100644 --- a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ipsec-ah-scapy.robot +++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ipsec-ah-scapy.robot @@ -25,13 +25,17 @@ | | Test Template | Local Template | -| Documentation | *IP4_IPSEC flow test cases* +| Documentation | **IP4_IPSEC flow test cases** | ... -| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\ +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1 2-node topology with one link \ | ... | between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IP4-AH. -| ... | *[Cfg] DUT configuration:* DUT is configured with IP4_IPSEC flow. -| ... | *[Ver] TG verification:* Verify if the flow action is correct. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IP4-AH. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT is configured with IP4_IPSEC flow. +| ... | +| ... | - **[Ver] TG verification:** Verify if the flow action is correct. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -53,8 +57,8 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IP4-IPSEC packet routed over DUT1 interfaces.\ -| | ... | Make VPP verify flow packet is correct. +| | ... | - **[Ver]** Make TG send IP4-IPSEC packet routed over DUT1 \ +| | ... | interfaces. Make VPP verify flow packet is correct. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer. Type: integer diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ipsec-esp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ipsec-esp-scapy.robot index e1c93bf7ee..3c6d10eee6 100644 --- a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ipsec-esp-scapy.robot +++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ipsec-esp-scapy.robot @@ -25,13 +25,17 @@ | | Test Template | Local Template | -| Documentation | *IP4_IPSEC flow test cases* +| Documentation | **IP4_IPSEC flow test cases** | ... -| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\ +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1 2-node topology with one link \ | ... | between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IP4-ESP. -| ... | *[Cfg] DUT configuration:* DUT is configured with IP4_IPSEC flow. -| ... | *[Ver] TG verification:* Verify if the flow action is correct. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IP4-ESP. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT is configured with IP4_IPSEC flow. +| ... | +| ... | - **[Ver] TG verification:** Verify if the flow action is correct. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -53,8 +57,8 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IP4-IPSEC packet routed over DUT1 interfaces.\ -| | ... | Make VPP verify flow packet is correct. +| | ... | - **[Ver]** Make TG send IP4-IPSEC packet routed over DUT1 \ +| | ... | interfaces. Make VPP verify flow packet is correct. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer. Type: integer diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-l2tpv3oip-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-l2tpv3oip-scapy.robot index c10af0cbb2..1c9a85defa 100644 --- a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-l2tpv3oip-scapy.robot +++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-l2tpv3oip-scapy.robot @@ -25,13 +25,18 @@ | | Test Template | Local Template | -| Documentation | *IP4_L2TPV3OIP flow test cases* +| Documentation | **IP4_L2TPV3OIP flow test cases** | ... -| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\ +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1 2-node topology with one link \ | ... | between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IP4-L2TPV3. -| ... | *[Cfg] DUT configuration:* DUT is configured with IP4_L2TPV3OIP flow. -| ... | *[Ver] TG verification:* Verify if the flow action is correct. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IP4-L2TPV3. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT is configured with IP4_L2TPV3OIP \ +| ... | flow. +| ... | +| ... | - **[Ver] TG verification:** Verify if the flow action is correct. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -53,8 +58,8 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IP4-L2TPV3OIP packet routed over DUT1 interfaces.\ -| | ... | Make VPP verify flow packet is correct. +| | ... | - **[Ver]** Make TG send IP4-L2TPV3OIP packet routed over DUT1 \ +| | ... | interfaces. Make VPP verify flow packet is correct. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer. Type: integer diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ntuple-tcp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ntuple-tcp-scapy.robot index 6aee4a89a7..498b01b052 100644 --- a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ntuple-tcp-scapy.robot +++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ntuple-tcp-scapy.robot @@ -25,13 +25,17 @@ | | Test Template | Local Template | -| Documentation | *IP4_N_TUPLE flow test cases* +| Documentation | **IP4_N_TUPLE flow test cases** | ... -| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\ +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1 2-node topology with one link \ | ... | between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IP4-TCP. -| ... | *[Cfg] DUT configuration:* DUT is configured with IP4_N_TUPLE flow. -| ... | *[Ver] TG verification:* Verify if the flow action is correct. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IP4-TCP. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT is configured with IP4_N_TUPLE flow. +| ... | +| ... | - **[Ver] TG verification:** Verify if the flow action is correct. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -54,7 +58,7 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IP4 packet routed over DUT1 interfaces.\ +| | ... | - **[Ver]** Make TG send IP4 packet routed over DUT1 interfaces. \ | | ... | Make VPP verify flow packet is correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ntuple-udp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ntuple-udp-scapy.robot index f9e747641e..f3c867ec0e 100644 --- a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ntuple-udp-scapy.robot +++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ntuple-udp-scapy.robot @@ -25,13 +25,17 @@ | | Test Template | Local Template | -| Documentation | *IP4_N_TUPLE flow test cases* +| Documentation | **IP4_N_TUPLE flow test cases** | ... -| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\ +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1 2-node topology with one link \ | ... | between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IP4-UDP. -| ... | *[Cfg] DUT configuration:* DUT is configured with IP4_N_TUPLE flow. -| ... | *[Ver] TG verification:* Verify if the flow action is correct. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IP4-UDP. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT is configured with IP4_N_TUPLE flow. +| ... | +| ... | - **[Ver] TG verification:** Verify if the flow action is correct. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -54,7 +58,7 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IP4 packet routed over DUT1 interfaces.\ +| | ... | - **[Ver]** Make TG send IP4 packet routed over DUT1 interfaces. \ | | ... | Make VPP verify flow packet is correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-tcp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-tcp-scapy.robot index b5d3548e1d..f4ea410b99 100644 --- a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-tcp-scapy.robot +++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-tcp-scapy.robot @@ -25,13 +25,17 @@ | | Test Template | Local Template | -| Documentation | *IP4 flow test cases* +| Documentation | **IP4 flow test cases** | ... -| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\ +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1 2-node topology with one link \ | ... | between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IP4-TCP. -| ... | *[Cfg] DUT configuration:* DUT is configured with IP4 flow. -| ... | *[Ver] TG verification:* Verify if the flow action is correct. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IP4-TCP. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT is configured with IP4 flow. +| ... | +| ... | - **[Ver] TG verification:** Verify if the flow action is correct. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -52,7 +56,7 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IP4 packet routed over DUT1 interfaces.\ +| | ... | - **[Ver]** Make TG send IP4 packet routed over DUT1 interfaces. \ | | ... | Make VPP verify flow packet is correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-udp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-udp-scapy.robot index 47f625cc02..e263b566c6 100644 --- a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-udp-scapy.robot +++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-udp-scapy.robot @@ -25,13 +25,17 @@ | | Test Template | Local Template | -| Documentation | *IP4 flow test cases* +| Documentation | **IP4 flow test cases** | ... -| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\ +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1 2-node topology with one link \ | ... | between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IP4-UDP. -| ... | *[Cfg] DUT configuration:* DUT is configured with IP4 flow. -| ... | *[Ver] TG verification:* Verify if the flow action is correct. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IP4-UDP. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT is configured with IP4 flow. +| ... | +| ... | - **[Ver] TG verification:** Verify if the flow action is correct. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -52,7 +56,7 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IP4 packet routed over DUT1 interfaces.\ +| | ... | - **[Ver]** Make TG send IP4 packet routed over DUT1 interfaces. \ | | ... | Make VPP verify flow packet is correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-ntuple-tcp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-ntuple-tcp-scapy.robot index 4c4e862461..a4545effae 100644 --- a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-ntuple-tcp-scapy.robot +++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-ntuple-tcp-scapy.robot @@ -25,13 +25,17 @@ | | Test Template | Local Template | -| Documentation | *IP6_N_TUPLE flow test cases* +| Documentation | **IP6_N_TUPLE flow test cases** | ... -| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\ +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1 2-node topology with one link \ | ... | between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IP6-TCP. -| ... | *[Cfg] DUT configuration:* DUT is configured with IP6_N_TUPLE flow. -| ... | *[Ver] TG verification:* Verify if the flow action is correct. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IP6-TCP. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT is configured with IP6_N_TUPLE flow. +| ... | +| ... | - **[Ver] TG verification:** Verify if the flow action is correct. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -54,7 +58,7 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IP6 packet routed over DUT1 interfaces.\ +| | ... | - **[Ver]** Make TG send IP6 packet routed over DUT1 interfaces. \ | | ... | Make VPP verify flow packet is correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-ntuple-udp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-ntuple-udp-scapy.robot index 8f27b4cf83..6071e65c81 100644 --- a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-ntuple-udp-scapy.robot +++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-ntuple-udp-scapy.robot @@ -25,13 +25,17 @@ | | Test Template | Local Template | -| Documentation | *IP6_N_TUPLE flow test cases* +| Documentation | **IP6_N_TUPLE flow test cases** | ... -| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\ +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1 2-node topology with one link \ | ... | between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IP6-UDP. -| ... | *[Cfg] DUT configuration:* DUT is configured with IP6_N_TUPLE flow. -| ... | *[Ver] TG verification:* Verify if the flow action is correct. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IP6-UDP. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT is configured with IP6_N_TUPLE flow. +| ... | +| ... | - **[Ver] TG verification:** Verify if the flow action is correct. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -54,7 +58,7 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IP6 packet routed over DUT1 interfaces.\ +| | ... | - **[Ver]** Make TG send IP6 packet routed over DUT1 interfaces. \ | | ... | Make VPP verify flow packet is correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-tcp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-tcp-scapy.robot index 9e50a278e7..8a7e3a4342 100644 --- a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-tcp-scapy.robot +++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-tcp-scapy.robot @@ -25,13 +25,17 @@ | | Test Template | Local Template | -| Documentation | *IP6 flow test cases* +| Documentation | **IP6 flow test cases** | ... -| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\ +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1 2-node topology with one link \ | ... | between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IP6-TCP. -| ... | *[Cfg] DUT configuration:* DUT is configured with IP6 flow. -| ... | *[Ver] TG verification:* Verify if the flow action is correct. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IP6-TCP. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT is configured with IP6 flow. +| ... | +| ... | - **[Ver] TG verification:** Verify if the flow action is correct. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -52,7 +56,7 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IP6 packet routed over DUT1 interfaces.\ +| | ... | - **[Ver]** Make TG send IP6 packet routed over DUT1 interfaces. \ | | ... | Make VPP verify flow packet is correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-udp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-udp-scapy.robot index 996a631713..0f019c737d 100644 --- a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-udp-scapy.robot +++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-udp-scapy.robot @@ -25,13 +25,17 @@ | | Test Template | Local Template | -| Documentation | *IP6 flow test cases* +| Documentation | **IP6 flow test cases** | ... -| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\ +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1 2-node topology with one link \ | ... | between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IP6-UDP. -| ... | *[Cfg] DUT configuration:* DUT is configured with IP6 flow. -| ... | *[Ver] TG verification:* Verify if the flow action is correct. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IP6-UDP. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT is configured with IP6 flow. +| ... | +| ... | - **[Ver] TG verification:** Verify if the flow action is correct. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -52,7 +56,7 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IP6 packet routed over DUT1 interfaces.\ +| | ... | - **[Ver]** Make TG send IP6 packet routed over DUT1 interfaces. \ | | ... | Make VPP verify flow packet is correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-namespace-scapy.robot b/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-namespace-scapy.robot index df18b3db62..b62247093c 100644 --- a/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-namespace-scapy.robot +++ b/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-namespace-scapy.robot @@ -26,19 +26,24 @@ | | Test Template | Local Template | -| Documentation | *Tap Interface Traffic Tests* -| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links +| Documentation | **Tap Interface Traffic Tests** +| ... | +| ... | - **[Top] Network Topologies:** TG=DUT1 2-node topology with two links \ | ... | between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-ICMPv4 for L2 switching of \ | ... | IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 -| ... | bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG) -| ... | are set depending on test case; Namespaces (NM) +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG) \ +| ... | are set depending on test case; Namespaces (NM) \ | ... | are set on DUT1 with attached linux-TAP. -| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets -| ... | are sent by TG on link to DUT1; On receipt TG verifies packets +| ... | +| ... | - **[Ver] TG verification:** Test ICMPv4 Echo Request packets \ +| ... | are sent by TG on link to DUT1; On receipt TG verifies packets \ | ... | for correctness and their IPv4 src-addr, dst-addr, and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -63,11 +68,11 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] On DUT1 configure two interface addresses with IPv4 of which\ -| | ... | one is TAP interface (dut_to_tg_if and TAP) and one is linux-TAP in\ -| | ... | namespace. -| | ... | [Ver] Packet sent from TG gets to the destination and ICMP-reply is\ -| | ... | received on TG. +| | ... | - **[Cfg]** On DUT1 configure two interface addresses with IPv4 of \ +| | ... | which one is TAP interface (dut_to_tg_if and TAP) and one is \ +| | ... | linux-TAP in namespace. +| | ... | - **[Ver]** Packet sent from TG gets to the destination and \ +| | ... | ICMP-reply is received on TG. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer. Type: integer diff --git a/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-scapy.robot b/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-scapy.robot index e23855a1ef..64ecb5573c 100644 --- a/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-scapy.robot +++ b/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-scapy.robot @@ -25,19 +25,24 @@ | | Test Template | Local Template | -| Documentation | *Tap Interface Traffic Tests* -| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links +| Documentation | **Tap Interface Traffic Tests** +| ... | +| ... | - **[Top] Network Topologies:** TG=DUT1 2-node topology with two links \ | ... | between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-ICMPv4 for L2 switching of \ | ... | IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 -| ... | bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG) -| ... | are set depending on test case; Namespaces (NM) +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG) \ +| ... | are set depending on test case; Namespaces (NM) \ | ... | are set on DUT1 with attached linux-TAP. -| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets -| ... | are sent by TG on link to DUT1; On receipt TG verifies packets +| ... | +| ... | - **[Ver] TG verification:** Test ICMPv4 Echo Request packets \ +| ... | are sent by TG on link to DUT1; On receipt TG verifies packets \ | ... | for correctness and their IPv4 src-addr, dst-addr, and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -62,10 +67,11 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] On DUT1 configure two interface addresses with IPv4 of which\ -| | ... | one is TAP interface (dut_to_tg_if and TAP) and one is linux-TAP. -| | ... | [Ver] Packet sent from TG gets to the destination and ICMP-reply is\ -| | ... | received on TG. +| | ... | - **[Cfg]** On DUT1 configure two interface addresses with IPv4 of \ +| | ... | which one is TAP interface (dut_to_tg_if and TAP) and one is \ +| | ... | linux-TAP. +| | ... | - **[Ver]** Packet sent from TG gets to the destination and \ +| | ... | ICMP-reply is received on TG. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer. Type: integer diff --git a/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2tap-scapy.robot b/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2tap-scapy.robot index 8a00466b25..f6e8e89f5c 100644 --- a/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2tap-scapy.robot +++ b/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2tap-scapy.robot @@ -26,20 +26,24 @@ | | Test Template | Local Template | -| Documentation | *Tap Interface Traffic Tests* -| -| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links +| Documentation | **Tap Interface Traffic Tests** +| ... | +| ... | - **[Top] Network Topologies:** TG=DUT1 2-node topology with two links \ | ... | between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of \ | ... | IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 -| ... | bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG) -| ... | are set depending on test case; Namespaces (NM) +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG) \ +| ... | are set depending on test case; Namespaces (NM) \ | ... | are set on DUT1 with attached linux-TAP. -| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61 -| ... | are sent by TG on link to DUT1; On receipt TG verifies packets +| ... | +| ... | - **[Ver] TG verification:** Test IPv4 packets with IP protocol=61 \ +| ... | are sent by TG on link to DUT1; On receipt TG verifies packets \ | ... | for correctness and their IPv4 src-addr, dst-addr, and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -58,8 +62,8 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Packet sent from TG is passed through all L2BD and received\ -| | ... | back on TG. Then src_ip, dst_ip and MAC are checked. +| | ... | - **[Ver]** Packet sent from TG is passed through all L2BD and \ +| | ... | received back on TG. Then src_ip, dst_ip and MAC are checked. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer. Type: integer diff --git a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlalwlistbase-scapy.robot b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlalwlistbase-scapy.robot index 7121cdb47e..cc353c7f65 100644 --- a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlalwlistbase-scapy.robot +++ b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlalwlistbase-scapy.robot @@ -25,18 +25,22 @@ | | Test Template | Local Template | -| Documentation | *ADL Security IPv4 allowlist test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \ +| Documentation | **ADL Security IPv4 allowlist test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on all links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \ -| ... | static routes. ADL security allowlist are applied on DUT1 ingress \ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on all links. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and static routes. ADL security allowlist are applied on DUT1 ingress \ | ... | interface from TG. -| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \ -| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \ -| ... | and drops as applicable. -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Ver] TG verification:** Test IPv4 packets are sent in one \ +| ... | direction by TG on link to DUT1; on receive TG verifies packets for \ +| ... | correctness and drops as applicable. +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | adl_plugin.so @@ -54,7 +58,7 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IPv4 on its interface to DUT1; \ +| | ... | - **[Ver]** Make TG send IPv4 on its interface to DUT1; \ | | ... | verify received IPv4 pkts are correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlblklistbase-scapy.robot b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlblklistbase-scapy.robot index bbfc156dce..d66686e782 100644 --- a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlblklistbase-scapy.robot +++ b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlblklistbase-scapy.robot @@ -25,18 +25,22 @@ | | Test Template | Local Template | -| Documentation | *ADL Security IPv4 allowlist test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \ +| Documentation | **ADL Security IPv4 allowlist test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on all links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \ -| ... | static routes. ADL security allowlist are applied on DUT1 ingress \ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on all links. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and static routes. ADL security allowlist are applied on DUT1 ingress \ | ... | interface from TG. -| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \ -| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \ -| ... | and drops as applicable. -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Ver] TG verification:** Test IPv4 packets are sent in one \ +| ... | direction by TG on link to DUT1; on receive TG verifies packets for \ +| ... | correctness and drops as applicable. +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | adl_plugin.so @@ -54,7 +58,7 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IPv4 on its interface to DUT1; \ +| | ... | - **[Ver]** Make TG send IPv4 on its interface to DUT1; \ | | ... | verify received IPv4 pkts are correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-scapy.robot b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-scapy.robot index 18a152732a..34e0fa6d9b 100644 --- a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-scapy.robot +++ b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-scapy.robot @@ -25,18 +25,22 @@ | | Test Template | Local Template | -| Documentation | *IPv4 iAcl whitelist test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **IPv4 iAcl whitelist test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on all links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \ -| ... | static routes. IPv4 iAcl security whitelist is applied on DUT1 ingress \ -| ... | interface from TG. -| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \ -| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \ -| ... | and drops as applicable. -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on all links. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and static routes. IPv4 iAcl security whitelist is applied on DUT1 \ +| ... | ingress interface from TG. +| ... | +| ... | - **[Ver] TG verification:** Test IPv4 packets are sent in one \ +| ... | direction by TG on link to DUT1; on receive TG verifies packets for \ +| ... | correctness and drops as applicable. +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -54,7 +58,7 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IPv4 on its interface to DUT1; \ +| | ... | - **[Ver]** Make TG send IPv4 on its interface to DUT1; \ | | ... | verify received IPv4 pkts are correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-scapy.robot b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-scapy.robot index a12c180bc2..aa859944e3 100644 --- a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-scapy.robot +++ b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-scapy.robot @@ -25,17 +25,22 @@ | | Test Template | Local Template | -| Documentation | *IPv4 policer test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **IPv4 policer test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on all links. -| ... | *[Cfg] DUT configuration:* On DUT1 configure interfaces IPv4 adresses, \ -| ... | and static ARP record on the second interface. On DUT1 configure 2R3C \ -| ... | color-aware policer on the first interface. -| ... | *[Ver] TG verification:* Test packet is sent from TG on the first link \ -| ... | to DUT1. Packet is received on TG on the second link from DUT1. -| ... | *[Ref] Applicable standard specifications:* RFC2474, RFC2697, RFC2698. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on all links. +| ... | +| ... | - **[Cfg] DUT configuration:** On DUT1 configure interfaces IPv4 \ +| ... | addresses and static ARP record on the second interface. On DUT1 \ +| ... | configure 2R3C color-aware policer on the first interface. +| ... | +| ... | - **[Ver] TG verification:** Test packet is sent from TG on the first \ +| ... | link to DUT1. Packet is received on TG on the second link from DUT1. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2474, RFC2697, \ +| ... | RFC2698. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -56,7 +61,7 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Test packet is sent from TG on the first link to DUT1. \ +| | ... | - **[Ver]** Test packet is sent from TG on the first link to DUT1. \ | | ... | Packet is received on TG on the second link from DUT1. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-scapy.robot b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-scapy.robot index e76d2af6ed..26aa8c3eb7 100644 --- a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-scapy.robot +++ b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-scapy.robot @@ -25,18 +25,24 @@ | | Test Template | Local Template | -| Documentation | *IPv4 routing test cases* +| Documentation | **IPv4 routing test cases** | ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \ +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing on both \ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing on both \ | ... | links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \ -| ... | two static IPv4 /24 route entries. -| ... | *[Ver] TG verification:* Test IPv4 packet with IP protocol=61 is sent \ -| ... | in one direction by TG on links to DUT1; on receive TG verifies packet \ -| ... | for correctness and their IPv4 src-addr, dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792 +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and two static IPv4 /24 route entries. +| ... | +| ... | - **[Ver] TG verification:** Test IPv4 packet with IP protocol=61 is \ +| ... | sent in one direction by TG on links to DUT1; on receive TG verifies \ +| ... | packet for correctness and their IPv4 src-addr, dst-addr and MAC \ +| ... | addresses. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC791, RFC826, RFC792 *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -54,7 +60,7 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IPv4 packet routed over DUT1 interfaces.\ +| | ... | - **[Ver]** Make TG send IPv4 packet routed over DUT1 interfaces. \ | | ... | Make TG verify IPv4 packet is correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44det-scapy.robot b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44det-scapy.robot index b051ac1852..808ecc4138 100644 --- a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44det-scapy.robot +++ b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44det-scapy.robot @@ -28,20 +28,24 @@ | | Test Template | Local Template | -| Documentation | *NAT44 deterministic mode test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **NAT44 deterministic mode test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and -| ... | one static IPv4 /${dest_mask} route entries. -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* Eth-IPv4-TCP packet is sent from TG to DUT1 in\ -| ... | one direction. Packet is received and verified for correctness on TG.\ -| ... | Then Eth-IPv4-TCP packet is sent from TG in opposite direction. Packet\ -| ... | is received and verified for correctness on TG. -| ... | *[Ref] Applicable standard specifications:* RFC791, RFC793, RFC3022, -| ... | RFC4787. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and one static IPv4 /${dest_mask} route entries. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** Eth-IPv4-TCP packet is sent from TG to \ +| ... | DUT1 in one direction. Packet is received and verified for correctness \ +| ... | on TG. Then Eth-IPv4-TCP packet is sent from TG in opposite direction. \ +| ... | Packet is received and verified for correctness on TG. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC791, RFC793, \ +| ... | RFC3022 and RFC4787. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | det44_plugin.so @@ -81,8 +85,8 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. -| | ... | [Ver] Make TG send IPv4 packet routed over DUT1 interfaces.\ +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. +| | ... | - **[Ver]** Make TG send IPv4 packet routed over DUT1 interfaces. \ | | ... | Make TG verify IPv4 packet is correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-scapy.robot b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-scapy.robot index 67459e6086..de4df2b492 100644 --- a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-scapy.robot +++ b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-scapy.robot @@ -17,8 +17,8 @@ | Resource | resources/libraries/robot/shared/traffic.robot | | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY -| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | NAT44_ENDPOINT_DEPENDENT -| ... | BASE | TCP | DRV_VFIO_PCI +| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 +| ... | NAT44_ENDPOINT_DEPENDENT | BASE | TCP | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 | ... | ethip4tcp-nat44ed | @@ -28,21 +28,25 @@ | | Test Template | Local Template | -| Documentation | *Connections per second NAT44 endpoint-dependent mode -| ... | performance test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **Connections per second NAT44 endpoint-dependent mode +| ... | performance test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and -| ... | one static IPv4 /18 route entries. -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* Eth-IPv4-TCP packet is sent from TG to DUT1 in\ -| ... | one direction. Packet is received and verified for correctness on TG.\ -| ... | Then Eth-IPv4-TCP packet is sent from TG in opposite direction. Packet\ -| ... | is received and verified for correctness on TG. -| ... | *[Ref] Applicable standard specifications:* RFC791, RFC793, RFC3022, -| ... | RFC4787. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and one static IPv4 /18 route entries. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** Eth-IPv4-TCP packet is sent from TG to \ +| ... | DUT1 in one direction. Packet is received and verified for correctness \ +| ... | on TG. Then Eth-IPv4-TCP packet is sent from TG in opposite direction. \ +| ... | Packet is received and verified for correctness on TG. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC791, RFC793, \ +| ... | RFC3022 and RFC4787. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so @@ -84,8 +88,8 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. -| | ... | [Ver] Make TG send IPv4 packet routed over DUT1 interfaces.\ +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. +| | ... | - **[Ver]** Make TG send IPv4 packet routed over DUT1 interfaces. \ | | ... | Make TG verify IPv4 packet is correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-scapy.robot b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-scapy.robot index a641e5f3eb..8770ce3b0e 100644 --- a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-scapy.robot +++ b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-scapy.robot @@ -28,20 +28,24 @@ | | Test Template | Local Template | -| Documentation | *NAT44 deterministic mode test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **NAT44 deterministic mode test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and -| ... | one static IPv4 /${dest_mask} route entries. -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* Eth-IPv4-UDP packet is sent from TG to DUT1 in\ -| ... | one direction. Packet is received and verified for correctness on TG.\ -| ... | Then Eth-IPv4-UDP packet is sent from TG in opposite direction. Packet\ -| ... | is received and verified for correctness on TG. -| ... | *[Ref] Applicable standard specifications:* RFC791, RFC768, RFC3022, -| ... | RFC4787. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and one static IPv4 /${dest_mask} route entries. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** Eth-IPv4-UDP packet is sent from TG to \ +| ... | DUT1 in one direction. Packet is received and verified for correctness \ +| ... | on TG. Then Eth-IPv4-UDP packet is sent from TG in opposite direction. \ +| ... | Packet is received and verified for correctness on TG. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC791, RFC768, \ +| ... | RFC3022 and RFC4787. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | det44_plugin.so @@ -81,8 +85,8 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. -| | ... | [Ver] Make TG send IPv4 packet routed over DUT1 interfaces.\ +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. +| | ... | - **[Ver]** Make TG send IPv4 packet routed over DUT1 interfaces. \ | | ... | Make TG verify IPv4 packet is correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-scapy.robot b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-scapy.robot index d11fa239df..a2efcf5dc4 100644 --- a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-scapy.robot +++ b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-scapy.robot @@ -17,8 +17,8 @@ | Resource | resources/libraries/robot/shared/traffic.robot | | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY -| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | NAT44_ENDPOINT_DEPENDENT -| ... | BASE | UDP | DRV_VFIO_PCI +| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 +| ... | NAT44_ENDPOINT_DEPENDENT | BASE | UDP | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 | ... | ethip4udp-nat44ed | @@ -28,21 +28,25 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput NAT44 endpoint-dependent mode -| ... | performance test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput NAT44 endpoint-dependent mode +| ... | performance test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and -| ... | one static IPv4 /${dest_mask} route entries. -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* Eth-IPv4-UDP packet is sent from TG to DUT1 in\ -| ... | one direction. Packet is received and verified for correctness on TG.\ -| ... | Then Eth-IPv4-UDP packet is sent from TG in opposite direction. Packet\ -| ... | is received and verified for correctness on TG. -| ... | *[Ref] Applicable standard specifications:* RFC791, RFC768, RFC3022, -| ... | RFC4787. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and one static IPv4 /${dest_mask} route entries. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** Eth-IPv4-UDP packet is sent from TG to \ +| ... | DUT1 in one direction. Packet is received and verified for correctness \ +| ... | on TG. Then Eth-IPv4-UDP packet is sent from TG in opposite direction. \ +| ... | Packet is received and verified for correctness on TG. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC791, RFC768, \ +| ... | RFC3022 and RFC4787. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so @@ -84,8 +88,8 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. -| | ... | [Ver] Make TG send IPv4 packet routed over DUT1 interfaces.\ +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. +| | ... | - **[Ver]** Make TG send IPv4 packet routed over DUT1 interfaces. \ | | ... | Make TG verify IPv4 packet is correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-scapy.robot b/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-scapy.robot index 157040a385..c601f31304 100644 --- a/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-scapy.robot +++ b/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-scapy.robot @@ -28,24 +28,28 @@ | | Test Template | Local Template | -| Documentation | *L2BD with GENEVE L3 mode test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **L2BD with GENEVE L3 mode test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\ -| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\ -| ... | routing over GENEVE tunnel. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\ -| ... | GENEVE tunnel and 4 static IPv4 /24 route entries.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \ +| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \ +| ... | for IPv4 routing over GENEVE tunnel. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | over GENEVE tunnel and 4 static IPv4 /24 route entries. \ | ... | DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* Test Eth-IPv4 packet is sent by TG-if1 on link\ -| ... | to DUT1-if1; on receive by TG-if2 the encapsulated packet is verified\ -| ... | for correctness and its outer and inner IPv4 and MAC addresses, UDP\ -| ... | ports and GENEVE vni and protocol number. Then test\ -| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 packet is sent by TG-if2 on link to\ -| ... | DUT1-if2; on receive by TG-if1 decapsulated packet is verified for\ +| ... | +| ... | - **[Ver] TG verification:** Test Eth-IPv4 packet is sent by TG-if1 on \ +| ... | link to DUT1-if1; on receive by TG-if2 the encapsulated packet is \ +| ... | verified for correctness and its outer and inner IPv4 and MAC \ +| ... | addresses, UDP ports and GENEVE vni and protocol number. Then test. \ +| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 packet is sent by TG-if2 on link to \ +| ... | DUT1-if2; on receive by TG-if1 decapsulated packet is verified for \ | ... | correctness and its IPv4 and MAC addresses -| ... | *[Ref] Applicable standard specifications:* RFC791, RFC768, RFC8926. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC791, RFC768, RFC8926. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so @@ -75,9 +79,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration. +| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-scapy.robot b/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-scapy.robot index c79d7f1039..aa0ed3058d 100644 --- a/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-scapy.robot +++ b/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-scapy.robot @@ -26,19 +26,23 @@ | | Test Template | Local Template | -| Documentation | *L2BD with VXLANoIPv4 test cases* -| -| ... | *[Top] Network topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **L2BD with VXLANoIPv4 test cases** +| ... | +| ... | - **[Top] Network topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on\ +| ... | +| ... | - **[Enc] Packet encapsulations:** Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \ | ... | TG-DUT. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\ -| ... | switching combined with MAC learning enable.\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \ +| ... | cross-connect switching.combined with MAC learning enable. \ | ... | VXLAN tunnels are configured on links betwen TG and DUT. -| ... | *[Ver] TG verification:* Test Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 packet is\ -| ... | sent by TG on link to DUT1; on receive TG verifies packets for\ -| ... | correctness and their IPv4 src-addr, dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC7348. +| ... | +| ... | - **[Ver] TG verification:** Test Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 \ +| ... | packet is sent by TG on link to DUT1; on receive TG verifies packets \ +| ... | for correctness and their IPv4 src-addr, dst-addr and MAC addresses. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -56,7 +60,7 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send VXLAN encapsulated Ethernet frame; verify\ +| | ... | - **[Ver]** Make TG send VXLAN encapsulated Ethernet frame; verify \ | | ... | all packets are received. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4vxlan-l2xcbase-scapy.robot b/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4vxlan-l2xcbase-scapy.robot index 93cedb6273..dcf48e8147 100644 --- a/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4vxlan-l2xcbase-scapy.robot +++ b/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4vxlan-l2xcbase-scapy.robot @@ -26,18 +26,22 @@ | | Test Template | Local Template | -| Documentation | *L2XC with VXLANoIPv4 test cases* -| -| ... | *[Top] Network topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **L2XC with VXLANoIPv4 test cases** +| ... | +| ... | - **[Top] Network topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on\ +| ... | +| ... | - **[Enc] Packet encapsulations:** Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \ | ... | TG-DUT. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect.\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \ | ... | VXLAN tunnels are configured on links betwen TG and DUT. -| ... | *[Ver] TG verification:* Test Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 packet is\ -| ... | sent by TG on link to DUT1; on receive TG verifies packets for\ -| ... | correctness and their IPv4 src-addr, dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC7348. +| ... | +| ... | - **[Ver] TG verification:** Test Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 \ +| ... | packet is sent by TG on link to DUT1; on receive TG verifies packets \ +| ... | for correctness and their IPv4 src-addr, dst-addr and MAC addresses. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -55,7 +59,7 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send VXLAN encapsulated Ethernet frame; verify\ +| | ... | - **[Ver]** Make TG send VXLAN encapsulated Ethernet frame; verify \ | | ... | all packets are received. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/ip4_tunnels/lisp/2n1l-10ge2p1x710-ethip4lisp-ip4base-scapy.robot b/tests/vpp/device/ip4_tunnels/lisp/2n1l-10ge2p1x710-ethip4lisp-ip4base-scapy.robot index 35343edd18..efaab06a0a 100644 --- a/tests/vpp/device/ip4_tunnels/lisp/2n1l-10ge2p1x710-ethip4lisp-ip4base-scapy.robot +++ b/tests/vpp/device/ip4_tunnels/lisp/2n1l-10ge2p1x710-ethip4lisp-ip4base-scapy.robot @@ -27,21 +27,25 @@ | | Test Template | Local Template | -| Documentation | *ip4-lisp-ip4 encapsulation test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node\ -| ... | circular topology with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4-ICMPv4\ -| ... | on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing\ +| Documentation | **ip4-lisp-ip4 encapsulation test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node \ +| ... | circular with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-LISP-IPv4-ICMPv4 \ +| ... | on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing \ | ... | over LISPoIPv4 tunnel. -| ... | *[Cfg] DUT configuration:* DUT is configured with IPv4\ -| ... | routing and static routes. LISPoIPv4 tunnel is\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT is configured with IPv4. \ +| ... | routing and static routes. LISPoIPv4 tunnel is \ | ... | configured between DUT1 and TG2. -| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets\ -| ... | are sent by TG on if1 link to DUT1; on receive TG verifies\ -| ... | packets for correctness and their IPv4 src-addr, dst-addr\ +| ... | +| ... | - **[Ver] TG verification:** Test ICMPv4 Echo Request packets \ +| ... | are sent by TG on if1 link to DUT1; on receive TG verifies \ +| ... | packets for correctness and their IPv4 src-addr, dst-addr \ | ... | and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC6830. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC6830. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so @@ -59,7 +63,7 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] On DUT1 configure LISP.\ +| | ... | - **[Cfg]** On DUT1 configure LISP. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer. Type: integer diff --git a/tests/vpp/device/ip4_tunnels/lisp/2n1l-10ge2p1x710-ethip4lispgpe-ip4base-scapy.robot b/tests/vpp/device/ip4_tunnels/lisp/2n1l-10ge2p1x710-ethip4lispgpe-ip4base-scapy.robot index 6ae9cf4321..80d69476e6 100644 --- a/tests/vpp/device/ip4_tunnels/lisp/2n1l-10ge2p1x710-ethip4lispgpe-ip4base-scapy.robot +++ b/tests/vpp/device/ip4_tunnels/lisp/2n1l-10ge2p1x710-ethip4lispgpe-ip4base-scapy.robot @@ -27,21 +27,25 @@ | | Test Template | Local Template | -| Documentation | *ip4-lispgpe-ip4 encapsulation test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node\ -| ... | circular topology with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISPGPE-IPv4-ICMPv4\ -| ... | on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4\ +| Documentation | **ip4-lispgpe-ip4 encapsulation test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node \ +| ... | circular with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-LISPGPE-IPv4-ICMPv4 \ +| ... | on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4. \ | ... | routing over LISPoIPv4 tunnel. -| ... | *[Cfg] DUT configuration:* DUT1 and TG(if2) are configured\ -| ... | with IPv4 routing and static routes. LISPoIPv4 tunnel is\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and TG(if2) are configured \ +| ... | with IPv4 routing and static routes. LISPoIPv4 tunnel is \ | ... | configured between DUT1 and TG. -| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets\ -| ... | are sent in TG->DUT(if1); On receive TG(if2) verifies packets\ -| ... | for correctness and their IPv4 src-addr, dst-addr and\ +| ... | +| ... | - **[Ver] TG verification:** Test ICMPv4 Echo Request packets \ +| ... | are sent in TG->DUT(if1); On receive TG(if2) verifies packets \ +| ... | for correctness and their IPv4 src-addr, dst-addr and \ | ... | MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC6830. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC6830. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so @@ -60,7 +64,7 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] On DUT1 configure LISP. +| | ... | - **[Cfg]** On DUT1 configure LISP. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer. Type: integer diff --git a/tests/vpp/device/ip4_tunnels/lisp/2n1l-10ge2p1x710-ethip4lispgpe-ip6base-scapy.robot b/tests/vpp/device/ip4_tunnels/lisp/2n1l-10ge2p1x710-ethip4lispgpe-ip6base-scapy.robot index 07ad9da61a..588e00af99 100644 --- a/tests/vpp/device/ip4_tunnels/lisp/2n1l-10ge2p1x710-ethip4lispgpe-ip6base-scapy.robot +++ b/tests/vpp/device/ip4_tunnels/lisp/2n1l-10ge2p1x710-ethip4lispgpe-ip6base-scapy.robot @@ -27,21 +27,25 @@ | | Test Template | Local Template | -| Documentation | *ip4-lispgpe-ip6 encapsulation test cases* -| -| ... | *[Top] Network Topologies:* TG(if1)-DUT1-TG(if2) 2-node\ -| ... | circular topology with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISPGPE-IPv6-ICMPv6\ -| ... | on DUT1-TG(if2),Eth-IPv6-ICMPv6 on TG-DUTn for IPv6\ +| Documentation | **ip4-lispgpe-ip6 encapsulation test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG(if1)-DUT1-TG(if2) 2-node \ +| ... | circular with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-LISPGPE-IPv6-ICMPv6 \ +| ... | on DUT1-TG(if2),Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 \ | ... | routing over LISPoIPv4 tunnel. -| ... | *[Cfg] DUT configuration:* DUT1 and TG(if2) are configured\ -| ... | with IPv6 routing and static routes. LISPoIPv4 tunnel is\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and TG(if2) are configured \ +| ... | with IPv6 routing and static routes. LISPoIPv4 tunnel is \ | ... | configured between DUT1 and TG(if2). -| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets\ -| ... | are sent in if1 by TG on links to DUT1; on receive\ -| ... | TG verifies packets for correctness and their IPv6 src-addr,\ +| ... | +| ... | - **[Ver] TG verification:** Test ICMPv6 Echo Request packets \ +| ... | are sent in if1 by TG on links to DUT1; on receive \ +| ... | TG verifies packets for correctness and their IPv6 src-addr, \ | ... | dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC6830. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC6830. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so @@ -61,7 +65,7 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] On DUT1 configure LISPGPE\ +| | ... | - **[Cfg]** On DUT1 configure LISPGPE. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer. Type: integer diff --git a/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlalwlistbase-scapy.robot b/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlalwlistbase-scapy.robot index 05718e6d35..56c2e3127b 100644 --- a/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlalwlistbase-scapy.robot +++ b/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlalwlistbase-scapy.robot @@ -25,18 +25,22 @@ | | Test Template | Local Template | -| Documentation | *ADL Security IPv6 allowlist test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \ +| Documentation | **ADL Security IPv6 allowlist test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 on all links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \ -| ... | static routes. ADL security allowlists are applied on DUT1 ingress \ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 on all links. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \ +| ... | and static routes. ADL security allowlists are applied on DUT1 ingress \ | ... | interface from TG. -| ... | *[Ver] TG verification:* Test IPv6 packets are sent in one direction \ -| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \ -| ... | and drops as applicable. -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Ver] TG verification:** Test IPv6 packets are sent in one \ +| ... | direction by TG on link to DUT1; on receive TG verifies packets for \ +| ... | correctness and drops as applicable. +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | adl_plugin.so @@ -54,7 +58,7 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IPv6 on its interface to DUT1; \ +| | ... | - **[Ver]** Make TG send IPv6 on its interface to DUT1; \ | | ... | verify received IPv6 pkts are correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlblklistbase-scapy.robot b/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlblklistbase-scapy.robot index 2ff2a760d7..a76389362c 100644 --- a/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlblklistbase-scapy.robot +++ b/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlblklistbase-scapy.robot @@ -25,18 +25,22 @@ | | Test Template | Local Template | -| Documentation | *ADL Security IPv6 allowlist test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \ +| Documentation | **ADL Security IPv6 allowlist test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 on all links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \ -| ... | static routes. ADL security allowlists are applied on DUT1 ingress \ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 on all links. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \ +| ... | and static routes. ADL security allowlists are applied on DUT1 ingress \ | ... | interface from TG. -| ... | *[Ver] TG verification:* Test IPv6 packets are sent in one direction \ -| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \ -| ... | and drops as applicable. -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Ver] TG verification:** Test IPv6 packets are sent in one \ +| ... | direction by TG on link to DUT1; on receive TG verifies packets for \ +| ... | correctness and drops as applicable. +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | adl_plugin.so @@ -54,7 +58,7 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IPv6 on its interface to DUT1; \ +| | ... | - **[Ver]** Make TG send IPv6 on its interface to DUT1; \ | | ... | verify received IPv6 pkts are correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-iacldstbase-scapy.robot b/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-iacldstbase-scapy.robot index 273a8feb92..67f8ef3441 100644 --- a/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-iacldstbase-scapy.robot +++ b/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-iacldstbase-scapy.robot @@ -25,18 +25,22 @@ | | Test Template | Local Template | -| Documentation | *IPv6 iAcl whitelist test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **IPv6 iAcl whitelist test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 on all links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 on all links. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \ | ... | static routes. IPv6 iAcl security whitelist is applied on DUT1 ingress \ | ... | interface from TG. -| ... | *[Ver] TG verification:* Test IPv6 packets are sent in one direction \ -| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \ -| ... | and drops as applicable. -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Ver] TG verification:** Test IPv6 packets are sent in one \ +| ... | direction by TG on link to DUT1; on receive TG verifies packets for \ +| ... | correctness and drops as applicable. +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -54,7 +58,7 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IPv6 on its interface to DUT1; \ +| | ... | - **[Ver]** Make TG send IPv6 on its interface to DUT1; \ | | ... | verify received IPv6 pkts are correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ipolicemarkbase-scapy.robot b/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ipolicemarkbase-scapy.robot index 2c9673c913..3dfc12151d 100644 --- a/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ipolicemarkbase-scapy.robot +++ b/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ipolicemarkbase-scapy.robot @@ -25,17 +25,22 @@ | | Test Template | Local Template | -| Documentation | *IPv4 policer test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **IPv4 policer test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 on all links. -| ... | *[Cfg] DUT configuration:* On DUT1 configure interfaces IPv6 adresses, \ -| ... | and static ARP record on the second interface. On DUT1 configure 2R3C \ -| ... | color-aware policer on the first interface. -| ... | *[Ver] TG verification:* Test packet is sent from TG on the first link \ -| ... | to DUT1. Packet is received on TG on the second link from DUT1. -| ... | *[Ref] Applicable standard specifications:* RFC2474, RFC2697, RFC2698. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 on all links. +| ... | +| ... | - **[Cfg] DUT configuration:** On DUT1 configure interfaces IPv6 \ +| ... | addresses and static ARP record on the second interface. On DUT1 \ +| ... | configure 2R3C color-aware policer on the first interface. +| ... | +| ... | - **[Ver] TG verification:** Test packet is sent from TG on the first \ +| ... | link to DUT1. Packet is received on TG on the second link from DUT1. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2474, RFC2697, \ +| ... | RFC2698. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -56,7 +61,7 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Test packet is sent from TG on the first link to DUT1. \ +| | ... | - **[Ver]** Test packet is sent from TG on the first link to DUT1. \ | | ... | Packet is received on TG on the second link from DUT1. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-scapy.robot b/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-scapy.robot index 46b9978316..c838264af9 100644 --- a/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-scapy.robot +++ b/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-scapy.robot @@ -25,18 +25,23 @@ | | Test Template | Local Template | -| Documentation | *IPv6 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \ +| Documentation | **IPv6 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing on \ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing on \ | ... | both links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \ | ... | two static IPv6 /64 route entries. -| ... | *[Ver] TG verification:* Test IPv6 packet is sent in one direction \ -| ... | by TG on links to DUT1; on receive TG verifies packet for correctness \ -| ... | and their IPv6 src-addr, dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC2460, RFC4443, RFC4861 +| ... | +| ... | - **[Ver] TG verification:** Test IPv6 packet is sent in one \ +| ... | direction by TG on links to DUT1; on receive TG verifies packet for \ +| ... | correctness and their IPv6 src-addr, dst-addr and MAC addresses. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2460, RFC4443, \ +| ... | RFC4861. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -54,7 +59,7 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IPv6 packet routed over DUT1 interfaces;\ +| | ... | - **[Ver]** Make TG send IPv6 packet routed over DUT1 interfaces. \ | | ... | Make TG verify IPv6 packet is correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/ip6_tunnels/lisp/2n1l-10ge2p1x710-ethip6lispgpe-ip4base-scapy.robot b/tests/vpp/device/ip6_tunnels/lisp/2n1l-10ge2p1x710-ethip6lispgpe-ip4base-scapy.robot index 8213d7f127..7ca92bdfed 100644 --- a/tests/vpp/device/ip6_tunnels/lisp/2n1l-10ge2p1x710-ethip6lispgpe-ip4base-scapy.robot +++ b/tests/vpp/device/ip6_tunnels/lisp/2n1l-10ge2p1x710-ethip6lispgpe-ip4base-scapy.robot @@ -27,20 +27,24 @@ | | Test Template | Local Template | -| Documentation | *ip6-lispgpe-ip4 encapsulation test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular\ -| ... | topology with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISPGPE-IPv4-ICMPv4\ -| ... | on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv6 routing\ +| Documentation | **ip6-lispgpe-ip4 encapsulation test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6-LISPGPE-IPv4-ICMPv4 \ +| ... | on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv6 routing \ | ... | over LISPoIPv6 tunnel. -| ... | *[Cfg] DUT configuration:* DUT1 and TG(if2) are configured\ -| ... | with IPv6 routing and static routes. LISPoIPv6 tunnel is\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and TG(if2) are configured \ +| ... | with IPv6 routing and static routes. LISPoIPv6 tunnel is \ | ... | configured between DUT1 and TG. -| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are\ -| ... | sent in TG->DUT(if1); On receive TG(if2) verifies packets for\ +| ... | +| ... | - **[Ver] TG verification:** Test ICMPv4 Echo Request packets are \ +| ... | sent in TG->DUT(if1); On receive TG(if2) verifies packets for \ | ... | correctness and their IPv4 src-addr, dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC6830. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC6830. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so @@ -60,7 +64,7 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] On DUT1 configure LISP.\ +| | ... | - **[Cfg]** On DUT1 configure LISP. \ | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer. Type: integer diff --git a/tests/vpp/device/ip6_tunnels/lisp/2n1l-10ge2p1x710-ethip6lispgpe-ip6base-scapy.robot b/tests/vpp/device/ip6_tunnels/lisp/2n1l-10ge2p1x710-ethip6lispgpe-ip6base-scapy.robot index c80633b53c..e428a2ef61 100644 --- a/tests/vpp/device/ip6_tunnels/lisp/2n1l-10ge2p1x710-ethip6lispgpe-ip6base-scapy.robot +++ b/tests/vpp/device/ip6_tunnels/lisp/2n1l-10ge2p1x710-ethip6lispgpe-ip6base-scapy.robot @@ -27,21 +27,25 @@ | | Test Template | Local Template | -| Documentation | *ip6-lispgpe-ip6 encapsulation test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node\ -| ... | circular topology with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISPGPE-IPv6-ICMPv6\ -| ... | on DUT1-TG, Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing\ +| Documentation | **ip6-lispgpe-ip6 encapsulation test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node \ +| ... | circular with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6-LISPGPE-IPv6-ICMPv6 \ +| ... | on DUT1-TG, Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing \ | ... | over LISPoIPv6 tunnel. -| ... | *[Cfg] DUT configuration:* DUT1 and TG(if2) are configured\ -| ... | with IPv6 routing and static routes. LISPoIPv6 tunnel is\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and TG(if2) are configured \ +| ... | with IPv6 routing and static routes. LISPoIPv6 tunnel is \ | ... | configured between DUT1 and TG. -| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets\ -| ... | are sent in TG->DUT(if1); On receive TG(if2) verifies\ -| ... | packets for correctness and their IPv6 src-addr,\ +| ... | +| ... | - **[Ver] TG verification:** Test ICMPv6 Echo Request packets \ +| ... | are sent in TG->DUT(if1); On receive TG(if2) verifies \ +| ... | packets for correctness and their IPv6 src-addr, \ | ... | dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC6830. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC6830. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so @@ -60,7 +64,7 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] On DUT1 configure LISP. +| | ... | - **[Cfg]** On DUT1 configure LISP. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer. Type: integer diff --git a/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-iacl1sf-scapy.robot b/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-iacl1sf-scapy.robot index 3cfe804df0..6aefa63bea 100644 --- a/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-iacl1sf-scapy.robot +++ b/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-iacl1sf-scapy.robot @@ -26,18 +26,22 @@ | | Test Template | Local Template | -| Documentation | *L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on all links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled.Required ACL rules are applied to input\ -| ... | paths of both DUT1 intefaces.\ -| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \ -| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \ -| ... | and drops as applicable. -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on all links. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. Required ACL rules are applied to \ +| ... | input paths of both DUT1 intefaces. +| ... | +| ... | - **[Ver] TG verification:** Test IPv4 packets are sent in one \ +| ... | direction by TG on link to DUT1; on receive TG verifies packets for \ +| ... | correctness and drops as applicable. +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -68,9 +72,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs. -| | ... | [Ver] Make TG send IPv4 packet in one direction between two\ -| | ... | of its interfaces to be switched by DUT to and from docker.\ +| | ... | - **[Cfg]** DUT runs L2BD config with ACLs. +| | ... | - **[Ver]** Make TG send IPv4 packet in one direction between two \ +| | ... | of its interfaces to be switched by DUT to and from docker. \ | | ... | Make TG verify IPv4 packet is correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-iacl1sl-scapy.robot b/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-iacl1sl-scapy.robot index 8ca92c5385..49690e0f18 100644 --- a/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-iacl1sl-scapy.robot +++ b/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-iacl1sl-scapy.robot @@ -26,18 +26,22 @@ | | Test Template | Local Template | -| Documentation | *L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on all links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled.Required ACL rules are applied to input\ -| ... | paths of both DUT1 intefaces.\ -| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \ -| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \ -| ... | and drops as applicable. -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on all links. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled.Required ACL rules are applied to \ +| ... | input paths of both DUT1 intefaces. +| ... | +| ... | - **[Ver] TG verification:** Test IPv4 packets are sent in one \ +| ... | direction by TG on link to DUT1; on receive TG verifies packets for \ +| ... | correctness and drops as applicable. +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -68,9 +72,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs. -| | ... | [Ver] Make TG send IPv4 packet in one direction between two\ -| | ... | of its interfaces to be switched by DUT to and from docker.\ +| | ... | - **[Cfg]** DUT runs L2BD config with ACLs. +| | ... | - **[Ver]** Make TG send IPv4 packet in one direction between two \ +| | ... | of its interfaces to be switched by DUT to and from docker. \ | | ... | Make TG verify IPv4 packet is correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-macip-iacl1sl-scapy.robot b/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-macip-iacl1sl-scapy.robot index 2546608d85..fdefa02dc5 100644 --- a/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-macip-iacl1sl-scapy.robot +++ b/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-macip-iacl1sl-scapy.robot @@ -26,18 +26,22 @@ | | Test Template | Local Template | -| Documentation | *L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on all links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled.Required MACIP ACL rules are applied to input\ -| ... | paths of both DUT1 intefaces.\ -| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \ -| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \ -| ... | and drops as applicable. -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on all links. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. Required ACL rules are applied to \ +| ... | input paths of both DUT1 intefaces. +| ... | +| ... | - **[Ver] TG verification:** Test IPv4 packets are sent in one \ +| ... | direction by TG on link to DUT1; on receive TG verifies packets for \ +| ... | correctness and drops as applicable. +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -69,9 +73,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs. -| | ... | [Ver] Make TG send IPv4 packet in one direction between two\ -| | ... | of its interfaces to be switched by DUT to and from docker.\ +| | ... | - **[Cfg]** DUT runs L2BD config with ACLs. +| | ... | - **[Ver]** Make TG send IPv4 packet in one direction between two \ +| | ... | of its interfaces to be switched by DUT to and from docker. \ | | ... | Make TG verify IPv4 packet is correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-oacl1sf-scapy.robot b/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-oacl1sf-scapy.robot index 7e71c42288..0d93313bda 100644 --- a/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-oacl1sf-scapy.robot +++ b/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-oacl1sf-scapy.robot @@ -26,18 +26,22 @@ | | Test Template | Local Template | -| Documentation | *L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on all links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled.Required ACL rules are applied to input\ -| ... | paths of both DUT1 intefaces.\ -| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \ -| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \ -| ... | and drops as applicable. -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on all links. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled.Required ACL rules are applied to \ +| ... | input paths of both DUT1 intefaces. +| ... | +| ... | - **[Ver] TG verification:** Test IPv4 packets are sent in one \ +| ... | direction by TG on link to DUT1; on receive TG verifies packets for \ +| ... | correctness and drops as applicable. +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -68,9 +72,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs. -| | ... | [Ver] Make TG send IPv4 packet in one direction between two\ -| | ... | of its interfaces to be switched by DUT to and from docker.\ +| | ... | - **[Cfg]** DUT runs L2BD config with ACLs. +| | ... | - **[Ver]** Make TG send IPv4 packet in one direction between two \ +| | ... | of its interfaces to be switched by DUT to and from docker. \ | | ... | Make TG verify IPv4 packet is correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-oacl1sl-scapy.robot b/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-oacl1sl-scapy.robot index 6636f1771d..c3c3301eed 100644 --- a/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-oacl1sl-scapy.robot +++ b/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-oacl1sl-scapy.robot @@ -26,18 +26,22 @@ | | Test Template | Local Template | -| Documentation | *L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on all links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled.Required ACL rules are applied to input\ -| ... | paths of both DUT1 intefaces.\ -| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \ -| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \ -| ... | and drops as applicable. -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on all links. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled.Required ACL rules are applied to \ +| ... | input paths of both DUT1 intefaces. +| ... | +| ... | - **[Ver] TG verification:** Test IPv4 packets are sent in one \ +| ... | direction by TG on link to DUT1; on receive TG verifies packets for \ +| ... | correctness and drops as applicable. +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -68,9 +72,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs. -| | ... | [Ver] Make TG send IPv4 packet in one direction between two\ -| | ... | of its interfaces to be switched by DUT to and from docker.\ +| | ... | - **[Cfg]** DUT runs L2BD config with ACLs. +| | ... | - **[Ver]** Make TG send IPv4 packet in one direction between two \ +| | ... | of its interfaces to be switched by DUT to and from docker. \ | | ... | Make TG verify IPv4 packet is correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-scapy.robot b/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-scapy.robot index 51026605ad..2e058b5bcc 100644 --- a/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-scapy.robot +++ b/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-scapy.robot @@ -25,19 +25,23 @@ | | Test Template | Local Template | -| Documentation | *L2 bridge-domain test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \ +| Documentation | **L2 bridge-domain test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ | ... | Both apply to all links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain \ -| ... | switching. -| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61 \ -| ... | are sent in both directions by TG on links to DUT1; on receive TG \ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \ +| ... | cross-connect switching. +| ... | +| ... | - **[Ver] TG verification:** Test IPv4 packets with IP protocol=61 \ +| ... | are sent in both directions by TG on links to DUT1; on receive TG. \ | ... | verifies packets for correctness and their IPv4 src-addr, \ | ... | dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC792 +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC792 *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -55,8 +59,8 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IPv4 packets in both directions between two\ -| | ... | of its interfaces to be switched by DUT to and from docker; verify\ +| | ... | - **[Ver]** Make TG send IPv4 packets in both directions between two \ +| | ... | of its interfaces to be switched by DUT to and from docker; verify \ | | ... | all packets are received. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/l2patch/2n1l-10ge2p1x710-ethip4-l2patch-scapy.robot b/tests/vpp/device/l2patch/2n1l-10ge2p1x710-ethip4-l2patch-scapy.robot index 91310bb5c6..e1bebee95f 100644 --- a/tests/vpp/device/l2patch/2n1l-10ge2p1x710-ethip4-l2patch-scapy.robot +++ b/tests/vpp/device/l2patch/2n1l-10ge2p1x710-ethip4-l2patch-scapy.robot @@ -25,18 +25,23 @@ | | Test Template | Local Template | -| Documentation | *L2 cross-connect test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \ +| Documentation | **L2 cross-connect test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of \ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of \ | ... | IPv4. Both apply to all links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 patch switching. -| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61 \ -| ... | are sent in both directions by TG on links to DUT1; on receive TG \ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 patch \ +| ... | switching. +| ... | +| ... | - **[Ver] TG verification:** Test IPv4 packets with IP protocol=61 \ +| ... | are sent in both directions by TG on links to DUT1; on receive TG. \ | ... | verifies packets for correctness and their IPv4 src-addr, \ | ... | dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC792 +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC792 *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -54,8 +59,8 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IPv4 packets in both directions between two\ -| | ... | of its interfaces to be switched by DUT to and from docker; verify\ +| | ... | - **[Ver]** Make TG send IPv4 packets in both directions between two \ +| | ... | of its interfaces to be switched by DUT to and from docker; verify \ | | ... | all packets are received. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/l2xc/2n1l-10ge2p1x710-ethip4-l2xcbase-scapy.robot b/tests/vpp/device/l2xc/2n1l-10ge2p1x710-ethip4-l2xcbase-scapy.robot index 5637715333..bab7a8b080 100644 --- a/tests/vpp/device/l2xc/2n1l-10ge2p1x710-ethip4-l2xcbase-scapy.robot +++ b/tests/vpp/device/l2xc/2n1l-10ge2p1x710-ethip4-l2xcbase-scapy.robot @@ -25,19 +25,23 @@ | | Test Template | Local Template | -| Documentation | *L2 cross-connect test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \ +| Documentation | **L2 cross-connect test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ | ... | Both apply to all links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect \ -| ... | switching. -| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61 \ -| ... | are sent in both directions by TG on links to DUT1; on receive TG \ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \ +| ... | cross-connect switching. +| ... | +| ... | - **[Ver] TG verification:** Test IPv4 packets with IP protocol=61 \ +| ... | are sent in both directions by TG on links to DUT1; on receive TG. \ | ... | verifies packets for correctness and their IPv4 src-addr, \ | ... | dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC792 +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC792 *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -55,8 +59,8 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Ver] Make TG send IPv4 packets in both directions between two\ -| | ... | of its interfaces to be switched by DUT to and from docker; verify\ +| | ... | - **[Ver]** Make TG send IPv4 packets in both directions between two \ +| | ... | of its interfaces to be switched by DUT to and from docker; verify \ | | ... | all packets are received. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-scapy.robot b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-scapy.robot index bbb3027953..433266e1f3 100644 --- a/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-scapy.robot +++ b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-scapy.robot @@ -15,8 +15,8 @@ | Resource | resources/libraries/robot/shared/default.robot | | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY -| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | SRv6 | SRv6_1SID | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | SRv6 | SRv6_1SID +| ... | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0 | ... | ethip6ip6-ip6base-srv6enc1sid | | Suite Setup | Setup suite topology interfaces | scapy @@ -25,20 +25,23 @@ | | Test Template | Local Template | -| Documentation | *Segment routing over IPv6 dataplane with one SID\ -| ... | (SRH not inserted) test suite.* -| -| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| Documentation | **Segment routing over IPv6 dataplane with one SID \ +| ... | (SRH not inserted) test suite.** +| ... | +| ... | - **[Top] Network topologies:** TG-DUT1 2-node topology with one link \ | ... | between nodes. -| ... | *[Cfg] DUT configuration:* On DUT1 configure physical interface IPv6\ -| ... | addresses, static ARP record, route and IPv6 forwarding over SRv6\ +| ... | +| ... | - **[Cfg] DUT configuration:** On DUT1 configure physical interface \ +| ... | IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 \ | ... | with one SID - Segment Routing Header not inserted. -| ... | *[Ver] TG verification:* ETH-IP6 packet is sent from TG to DUT1 in one\ -| ... | direction. Packet is received and verified for correctness on TG. Then\ -| ... | ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is\ -| ... | received and verified for correctness on TG. -| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ -| ... | draft 3. +| ... | +| ... | - **[Ver] TG verification:** ETH-IP6 packet is sent from TG to DUT1 in \ +| ... | one direction. Packet is received and verified for correctness on TG. \ +| ... | Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet \ +| ... | is received and verified for correctness on TG. +| ... | +| ... | - **[Ref] Applicable standard specifications:** SRv6 Network \ +| ... | Programming - draft 3. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -72,10 +75,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 is configured with IPv6 routing and static route,\ -| | ... | SR policy and steering policy for one direction and one SR\ +| | ... | - **[Cfg]** DUT1 is configured with IPv6 routing and static route, \ +| | ... | SR policy and steering policy for one direction and one SR \ | | ... | behaviour (function) - End.DX6 - for other direction. -| | ... | [Ver] Make TG send IPv6 packets routed over DUT1 interfaces.\ +| | ... | - **[Ver]** Make TG send IPv6 packets routed over DUT1 interfaces. \ | | ... | Make TG verify IPv6 packets are correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-scapy.robot b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-scapy.robot index 6635779e48..ff172552b7 100644 --- a/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-scapy.robot +++ b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-scapy.robot @@ -26,20 +26,23 @@ | | Test Template | Local Template | -| Documentation | *Segment routing over IPv6 dataplane with two SIDs\ -| ... | (SRH inserted) test suite.* -| -| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| Documentation | **Segment routing over IPv6 dataplane with two SIDs \ +| ... | (SRH inserted) test suite.** +| ... | +| ... | - **[Top] Network topologies:** TG-DUT1 2-node topology with one link \ | ... | between nodes. -| ... | *[Cfg] DUT configuration:* On DUT1 configure physical interface IPv6\ -| ... | addresses, static ARP record, route and IPv6 forwarding over SRv6\ +| ... | +| ... | - **[Cfg] DUT configuration:** On DUT1 configure physical interface \ +| ... | IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 \ | ... | with two SIDs - Segment Routing Header inserted. -| ... | *[Ver] TG verification:* ETH-IP6 packet is sent from TG to DUT1 in one\ -| ... | direction. Packet is received and verified for correctness on TG. Then\ -| ... | ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is\ -| ... | received and verified for correctness on TG. -| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ -| ... | draft 3. +| ... | +| ... | - **[Ver] TG verification:** ETH-IP6 packet is sent from TG to DUT1 in \ +| ... | one direction. Packet is received and verified for correctness on TG. \ +| ... | Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet \ +| ... | is received and verified for correctness on TG. +| ... | +| ... | - **[Ref] Applicable standard specifications:** SRv6 Network \ +| ... | Programming - draft 3. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -75,10 +78,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 is configured with IPv6 routing and static route,\ -| | ... | SR policy and steering policy for one direction and one SR\ +| | ... | - **[Cfg]** DUT1 is configured with IPv6 routing and static route, \ +| | ... | SR policy and steering policy for one direction and one SR \ | | ... | behaviour (function) - End - for other direction. -| | ... | [Ver] Make TG send IPv6 packets routed over DUT1 interfaces.\ +| | ... | - **[Ver]** Make TG send IPv6 packets routed over DUT1 interfaces. \ | | ... | Make TG verify IPv6 packets are correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy.robot b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy.robot index 58bc7b66ab..6f69423b11 100644 --- a/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy.robot +++ b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy.robot @@ -26,20 +26,23 @@ | | Test Template | Local Template | -| Documentation | *Segment routing over IPv6 dataplane with two SIDs\ -| ... | (SRH inserted) test suite.* -| -| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| Documentation | **Segment routing over IPv6 dataplane with two SIDs \ +| ... | (SRH inserted) test suite.** +| ... | +| ... | - **[Top] Network topologies:** TG-DUT1 2-node topology with one link \ | ... | between nodes. -| ... | *[Cfg] DUT configuration:* On DUT1 configure physical interface IPv6\ -| ... | addresses, static ARP record, route and IPv6 forwarding over SRv6\ +| ... | +| ... | - **[Cfg] DUT configuration:** On DUT1 configure physical interface \ +| ... | IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 \ | ... | with two SIDs - Segment Routing Header inserted. -| ... | *[Ver] TG verification:* ETH-IP6 packet is sent from TG to DUT1 in one\ -| ... | direction. Packet is received and verified for correctness on TG. Then\ -| ... | ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is\ -| ... | received and verified for correctness on TG. -| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ -| ... | draft 3. +| ... | +| ... | - **[Ver] TG verification:** ETH-IP6 packet is sent from TG to DUT1 in \ +| ... | one direction. Packet is received and verified for correctness on TG. \ +| ... | Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet \ +| ... | is received and verified for correctness on TG. +| ... | +| ... | - **[Ref] Applicable standard specifications:** SRv6 Network \ +| ... | Programming - draft 3. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -75,10 +78,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 is configured with IPv6 routing and static route,\ -| | ... | SR policy and steering policy for one direction and two SR\ +| | ... | - **[Cfg]** DUT1 is configured with IPv6 routing and static route, \ +| | ... | SR policy and steering policy for one direction and two SR \ | | ... | behaviours (functions) - End and End.DX6 - for other direction. -| | ... | [Ver] Make TG send IPv6 packets routed over DUT1 interfaces.\ +| | ... | - **[Ver]** Make TG send IPv6 packets routed over DUT1 interfaces. \ | | ... | Make TG verify IPv6 packets are correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-scapy.robot b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-scapy.robot index 2bb20ace6e..dd5f6facac 100644 --- a/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-scapy.robot +++ b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-scapy.robot @@ -26,20 +26,23 @@ | | Test Template | Local Template | -| Documentation | *Segment routing over IPv6 dataplane with Dynamic\ -| ... | SRv6 proxy test suite.* -| -| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| Documentation | **Segment routing over IPv6 dataplane with Dynamic \ +| ... | SRv6 proxy test suite.** +| ... | +| ... | - **[Top] Network topologies:** TG-DUT1 2-node topology with one link \ | ... | between nodes. -| ... | *[Cfg] DUT configuration:* On DUT1 configure physical interface IPv6\ -| ... | addresses, static ARP record, route and IPv6 forwarding over SRv6\ +| ... | +| ... | - **[Cfg] DUT configuration:** On DUT1 configure physical interface \ +| ... | IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 \ | ... | with three SIDs - Segment Routing Header inserted. -| ... | *[Ver] TG verification:* ETH-IP6 packet is sent from TG to DUT1 in one\ -| ... | direction. Packet is received and verified for correctness on TG. Then\ -| ... | ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is\ -| ... | received and verified for correctness on TG. -| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ -| ... | draft 3. +| ... | +| ... | - **[Ver] TG verification:** ETH-IP6 packet is sent from TG to DUT1 in \ +| ... | one direction. Packet is received and verified for correctness on TG. \ +| ... | Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet \ +| ... | is received and verified for correctness on TG. +| ... | +| ... | - **[Ref] Applicable standard specifications:** SRv6 Network \ +| ... | Programming - draft 3. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -88,10 +91,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 is configured with IPv6 routing and static route,\ -| | ... | SR policy and steering policy for one direction and one SR\ +| | ... | - **[Cfg]** DUT1 is configured with IPv6 routing and static route, \ +| | ... | SR policy and steering policy for one direction and one SR \ | | ... | behaviour (function) - End.AD - for other direction. -| | ... | [Ver] Make TG send IPv6 packets routed over DUT1 interfaces.\ +| | ... | - **[Ver]** Make TG send IPv6 packets routed over DUT1 interfaces. \ | | ... | Make TG verify IPv6 packets are correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-scapy.robot b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-scapy.robot index 44ea258288..379310e040 100644 --- a/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-scapy.robot +++ b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-scapy.robot @@ -26,20 +26,23 @@ | | Test Template | Local Template | -| Documentation | *Segment routing over IPv6 dataplane with Masquerading\ -| ... | SRv6 proxy test cases* -| -| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| Documentation | **Segment routing over IPv6 dataplane with Masquerading \ +| ... | SRv6 proxy test cases** +| ... | +| ... | - **[Top] Network topologies:** TG-DUT1 2-node topology with one link \ | ... | between nodes. -| ... | *[Cfg] DUT configuration:* On DUT1 configure physical interface IPv6\ -| ... | addresses, static ARP record, route and IPv6 forwarding over SRv6\ +| ... | +| ... | - **[Cfg] DUT configuration:** On DUT1 configure physical interface \ +| ... | IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 \ | ... | with three SIDs - Segment Routing Header inserted. -| ... | *[Ver] TG verification:* ETH-IP6 packet is sent from TG to DUT1 in one\ -| ... | direction. Packet is received and verified for correctness on TG. Then\ -| ... | ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is\ -| ... | received and verified for correctness on TG. -| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ -| ... | draft 3. +| ... | +| ... | - **[Ver] TG verification:** ETH-IP6 packet is sent from TG to DUT1 in \ +| ... | one direction. Packet is received and verified for correctness on TG. \ +| ... | Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet \ +| ... | is received and verified for correctness on TG. +| ... | +| ... | - **[Ref] Applicable standard specifications:** SRv6 Network \ +| ... | Programming - draft 3. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -88,10 +91,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 is configured with IPv6 routing and static route,\ -| | ... | SR policy and steering policy for one direction and one SR\ +| | ... | - **[Cfg]** DUT1 is configured with IPv6 routing and static route, \ +| | ... | SR policy and steering policy for one direction and one SR \ | | ... | behaviour (function) - End.AM - for other direction. -| | ... | [Ver] Make TG send IPv6 packets routed over DUT1 interfaces.\ +| | ... | - **[Ver]** Make TG send IPv6 packets routed over DUT1 interfaces. \ | | ... | Make TG verify IPv6 packets are correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-scapy.robot b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-scapy.robot index 6357fde054..43cd587015 100644 --- a/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-scapy.robot +++ b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-scapy.robot @@ -26,20 +26,23 @@ | | Test Template | Local Template | -| Documentation | *Segment routing over IPv6 dataplane with Static\ -| ... | SRv6 proxy test cases.* -| -| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| Documentation | **Segment routing over IPv6 dataplane with Static \ +| ... | SRv6 proxy test cases.** +| ... | +| ... | - **[Top] Network topologies:** TG-DUT1 2-node topology with one link \ | ... | between nodes. -| ... | *[Cfg] DUT configuration:* On DUT1 configure physical interface IPv6\ -| ... | addresses, static ARP record, route and IPv6 forwarding over SRv6\ +| ... | +| ... | - **[Cfg] DUT configuration:** On DUT1 configure physical interface \ +| ... | IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 \ | ... | with three SIDs - Segment Routing Header inserted. -| ... | *[Ver] TG verification:* ETH-IP6 packet is sent from TG to DUT1 in one\ -| ... | direction. Packet is received and verified for correctness on TG. Then\ -| ... | ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is\ -| ... | received and verified for correctness on TG. -| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ -| ... | draft 3. +| ... | +| ... | - **[Ver] TG verification:** ETH-IP6 packet is sent from TG to DUT1 in \ +| ... | one direction. Packet is received and verified for correctness on TG. \ +| ... | Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet \ +| ... | is received and verified for correctness on TG. +| ... | +| ... | - **[Ref] Applicable standard specifications:** SRv6 Network \ +| ... | Programming - draft 3. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -88,10 +91,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 is configured with IPv6 routing and static route,\ -| | ... | SR policy and steering policy for one direction and one SR\ +| | ... | - **[Cfg]** DUT1 is configured with IPv6 routing and static route, \ +| | ... | SR policy and steering policy for one direction and one SR \ | | ... | behaviour (function) - End.AS - for other direction. -| | ... | [Ver] Make TG send IPv6 packets routed over DUT1 interfaces.\ +| | ... | - **[Ver]** Make TG send IPv6 packets routed over DUT1 interfaces. \ | | ... | Make TG verify IPv6 packets are correct. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhost-1vm-scapy.robot b/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhost-1vm-scapy.robot index 7d9cce5d2f..88b105e25a 100644 --- a/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhost-1vm-scapy.robot +++ b/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhost-1vm-scapy.robot @@ -25,19 +25,25 @@ | | Test Template | Local Template | -| Documentation | *IPv4 routing test cases with vhost user interface* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \ -| ... | VM and single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing on both links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \ -| ... | two static IPv4 /24 route entries. Qemu Guest is connected to VPP via \ -| ... | vhost-user interfaces. Guest is running VPP ip4 interconnecting \ +| Documentation | **IPv4 routing test cases with vhost user interface** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with VM and single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing on both \ +| ... | links. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and two static IPv4 /24 route entries. Qemu Guest is connected to VPP \ +| ... | via vhost-user interfaces. Guest is running VPP ip4 interconnecting \ | ... | vhost-user interfaces. -| ... | *[Ver] TG verification:* Test IPv4 packet with IP protocol=61 is sent \ -| ... | in one direction by TG on links to DUT1; on receive TG verifies packet \ -| ... | for correctness and their IPv4 src-addr, dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792 +| ... | +| ... | - **[Ver] TG verification:** Test IPv4 packet with IP protocol=61 is \ +| ... | sent in one direction by TG on links to DUT1; on receive TG verifies \ +| ... | packet for correctness and their IPv4 src-addr, dst-addr and MAC \ +| ... | addresses. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC791, RFC826, RFC792 *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so diff --git a/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2vhost-1vm-scapy.robot b/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2vhost-1vm-scapy.robot index 165d16e202..338914dddb 100644 --- a/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2vhost-1vm-scapy.robot +++ b/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2vhost-1vm-scapy.robot @@ -26,21 +26,25 @@ | | Test Template | Local Template | -| Documentation | *L2 bridge-domain test cases with vhost user interface* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \ -| ... | VM and single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 \ +| Documentation | **L2 bridge-domain test cases with vhost user interface** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with VM and single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 \ | ... | bridge-domains (L2BD) switching combined with MAC learning enabled. \ | ... | Qemu Guest is connected to VPP via vhost-user interfaces. Guest is \ | ... | configured with VPP l2 cross-connect interconnecting vhost-user \ | ... | interfaces. -| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61 are \ -| ... | sent in both directions by TG on links to DUT1 via VM; on receive TG \ +| ... | +| ... | - **[Ver] TG verification:** Test IPv4 packets with IP protocol=61 are \ +| ... | sent in both directions by TG on links to DUT1 via VM; on receive TG. \ | ... | verifies packets for correctness and their IPv4 src-addr, dst-addr \ | ... | and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC792 +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC792 *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -62,10 +66,13 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4. [Cfg] On DUT1 configure \ +| | ... | - **[Top]** TG=DUT=VM. +| | ... | - **[Enc]** Eth-IPv4. +| | ... | - **[Cfg]** On DUT1 configure \ | | ... | two L2BDs with MAC learning, each with vhost-user i/f to local \ | | ... | VM and i/f to TG; configure VPP in VM to loop pkts back betwen its \ -| | ... | two virtio i/fs. [Ver] Make TG verify IPv4 packets are switched \ +| | ... | two virtio i/fs. +| | ... | - **[Ver]** Make TG verify IPv4 packets are switched \ | | ... | thru DUT1 and VM in both directions and are correct on receive. | | | | ... | *Arguments:* diff --git a/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2vhost-1vm-scapy.robot b/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2vhost-1vm-scapy.robot index 4f8df594a3..734b162eb9 100644 --- a/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2vhost-1vm-scapy.robot +++ b/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2vhost-1vm-scapy.robot @@ -25,20 +25,24 @@ | | Test Template | Local Template | -| Documentation | *L2 cross-connect test cases with vhost user interface* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \ -| ... | VM and single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect \ +| Documentation | **L2 cross-connect test cases with vhost user interface** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with VM and single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \ | ... | (L2XC) switching. Qemu Guest is connected to VPP via vhost-user \ -| ... | interfaces. Guest is configured with VPP l2 cross-connect \ +| ... | interfaces. Guest is configured with VPP l2 cross-connect. \ | ... | interconnecting vhost-user interfaces. -| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61 are \ -| ... | sent in both directions by TG on links to DUT1 via VM; on receive TG \ +| ... | +| ... | - **[Ver] TG verification:** Test IPv4 packets with IP protocol=61 are \ +| ... | sent in both directions by TG on links to DUT1 via VM; on receive TG. \ | ... | verifies packets for correctness and their IPv4 src-addr, dst-addr \ | ... | and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC792 +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC792 *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -60,9 +64,12 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4. [Cfg] On DUT configure \ +| | ... | - **[Top]** TG=DUT=VM. +| | ... | - **[Enc]** Eth-IPv4. +| | ... | - **[Cfg]** On DUT configure \ | | ... | two L2 cross-connects (L2XC), each with one untagged interface \ -| | ... | to TG and untagged i/f to local VM over vhost-user. [Ver] Make \ +| | ... | to TG and untagged i/f to local VM over vhost-user. +| | ... | - **[Ver]** Make \ | | ... | TG send IPv4 packets in both directions between two of its \ | | ... | i/fs to be switched by DUT to and from VM; verify all packets \ | | ... | are received. [Ref] diff --git a/tests/vpp/device/vm_vhost/ethip6/2n1l-10ge2p1x710-ethip6-ip6base-eth-2vhost-1vm-scapy.robot b/tests/vpp/device/vm_vhost/ethip6/2n1l-10ge2p1x710-ethip6-ip6base-eth-2vhost-1vm-scapy.robot index 33313e06ad..e1ce837eb1 100644 --- a/tests/vpp/device/vm_vhost/ethip6/2n1l-10ge2p1x710-ethip6-ip6base-eth-2vhost-1vm-scapy.robot +++ b/tests/vpp/device/vm_vhost/ethip6/2n1l-10ge2p1x710-ethip6-ip6base-eth-2vhost-1vm-scapy.robot @@ -25,19 +25,25 @@ | | Test Template | Local Template | -| Documentation | *IPv4 routing test cases with vhost user interface* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \ -| ... | VM and single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing on both links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \ +| Documentation | **IPv4 routing test cases with vhost user interface** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with VM and single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing on both \ +| ... | links. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \ | ... | two static IPv6 /64 route entries. Qemu Guest is connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP ip6 interconnecting \ | ... | vhost-user interfaces. -| ... | *[Ver] TG verification:* Test IPv6 packets are sent in one direction \ -| ... | by TG on links to DUT1; on receive TG verifies packets for correctness \ -| ... | and their IPv6 src-addr, dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC2460, RFC4443, RFC4861 +| ... | +| ... | - **[Ver] TG verification:** Test IPv6 packets are sent in one \ +| ... | direction by TG on links to DUT1; on receive TG verifies packets for \ +| ... | correctness and their IPv6 src-addr, dst-addr and MAC addresses. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2460, RFC4443, \ +| ... | RFC4861. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -91,7 +97,6 @@ | | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0] | | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0] - *** Test Cases *** | 78B-0c-ethip6-ip6base-eth-2vhost-1vm-scapy | | [Tags] | 78B | 0C diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot index 36a1e6945c..c06d7dd67a 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot @@ -27,31 +27,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD with memif and IEEE 802.1Q test -| ... | cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. IEEE\ +| Documentation | **RFC2544: Pkt throughput L2BD with memif and IEEE 802.1Q \ +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. IEEE \ | ... | 802.1Q tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2\ -| ... | bridge domains and MAC learning enabled. Container is connected to VPP\ -| ... | via Memif interface. Container is running same VPP version as running\ -| ... | on DUT. Container is limited via cgroup to use 3 cores allocated from\ -| ... | pool of isolated CPUs. There are no memory constraints. DUT1 and DUT2\ -| ... | tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are\ -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\ -| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP\ -| ... | protocol=61 and static payload. MAC addresses are matching MAC\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with two \ +| ... | L2 bridge domains and MAC learning enabled. Container is connected to \ +| ... | VPP via Memif interface. Container is running same VPP version as \ +| ... | running on DUT. Container is limited via cgroup to use 3 cores \ +| ... | allocated from pool of isolated CPUs. There are no memory constraints. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are \ +| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 \ +| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -77,9 +82,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD switching with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD switching with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot index 954330ed84..dd2cbd9275 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot @@ -27,26 +27,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 -| ... | bridge domains and MAC learning enabled. LXC is connected to VPP via -| ... | Memif interface. LXC is running same VPP version as running on DUT. LXC -| ... | is limited via cgroup to use 3 cores allocated from pool of isolated -| ... | CPUs. There are no memory constraints. DUT1 and DUT2 tested with -| ... | ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with two \ +| ... | L2 bridge domains and MAC learning enabled. LXC is connected to VPP \ +| ... | via Memif interface. LXC is running same VPP version as running on \ +| ... | DUT. LXC is limited via cgroup to use 3 cores allocated from pool of \ +| ... | isolated CPUs. There are no memory constraints. DUT1 and DUT2 are \ +| ... | tested with with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -69,9 +73,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot index 98e7b65dc5..79c05295ae 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot @@ -27,26 +27,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use 3 cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2XC test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | cross-connect. DUT1 and DUT2 tested with ${nic_name}. +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | use 3 cores allocated from pool of isolated CPUs. There are no memory \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -69,9 +73,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | - **[Cfg]** DUT runs L2XC switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot index 1338076b65..cb89c62036 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot @@ -27,25 +27,29 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | LXC is connected to VPP via Memif interface. LXC is running same VPP -| ... | version as running on DUT. LXC is limited via cgroup to use 3 cores +| Documentation | **RFC2544: Pkt throughput L2XC test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | cross-connect. DUT1 and DUT2 tested with ${nic_name}. +| ... | LXC is connected to VPP via Memif interface. LXC is running same VPP \ +| ... | version as running on DUT. LXC is limited via cgroup to use 3 cores \ | ... | allocated from pool of isolated CPUs. There are no memory contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -68,9 +72,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | - **[Cfg]** DUT runs L2XC switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot index 596ecba253..9dae8337e8 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot @@ -26,26 +26,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing with two FIB tables and two static IPv4 /24 route entries per -| ... | FIB table. Container is connected to VPP via Memif interface. Container -| ... | is running same VPP version as running on DUT. Container is limited via -| ... | cgroup to use cores allocated from pool of isolated CPUs. There are no -| ... | memory contraints. DUTs are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing with two FIB tables and two static IPv4 /24 route entries per \ +| ... | FIB table. Container is connected to VPP via Memif interface. \ +| ... | Container is running same VPP version as running on DUT. Container is \ +| ... | limited via cgroup to use cores allocated from pool of isolated CPUs. \ +| ... | There are no memory contraints. DUTs are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -68,9 +72,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot index fad1dce4d9..eb3dfb2825 100644 --- a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot @@ -27,31 +27,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD with memif and IEEE 802.1Q test -| ... | cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. IEEE\ +| Documentation | **RFC2544: Pkt throughput L2BD with memif and IEEE 802.1Q +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. IEEE \ | ... | 802.1Q tagging is applied on link between DUT1-if2 and TG-if2. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge\ -| ... | domains and MAC learning enabled. Container is connected to VPP via\ -| ... | Memif interface. Container is running same VPP version as running\ -| ... | on DUT. Container is limited via cgroup to use 3 cores allocated from\ -| ... | pool of isolated CPUs. There are no memory constraints. DUT1 is tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are\ -| ... | generated by TG on links to DUT1. TG traffic profile contains two L3\ -| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP\ -| ... | protocol=61 and static payload. MAC addresses are matching MAC\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. Container is connected to VPP via \ +| ... | Memif interface. Container is running same VPP version as running \ +| ... | on DUT. Container is limited via cgroup to use 3 cores allocated from \ +| ... | pool of isolated CPUs. There are no memory constraints. DUT1 is tested \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are \ +| ... | generated by TG on links to DUT1. TG traffic profile contains two L3 \ +| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -77,9 +82,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD switching with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD switching with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot index 357cc7bf4a..bbc772e004 100644 --- a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot @@ -27,26 +27,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -69,9 +73,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot index b23549ff7b..7a0f23a674 100644 --- a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot @@ -27,26 +27,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect. -| ... | DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2XC test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \ +| ... | DUT1 tested with ${nic_name}. +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -69,9 +73,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | - **[Cfg]** DUT runs L2XC switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot index fde91950ca..db383c4f50 100644 --- a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot @@ -27,26 +27,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing with -| ... | two FIB tables and two static IPv4 /24 route entries per FIB table. -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | with two FIB tables and two static IPv4 /24 route entries per FIB \ +| ... | table. Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -69,9 +73,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index 00c03aad2d..e18c2137cf 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot index 5114baee1c..9bc9399de9 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot index 61817dcd48..496cb5e1f7 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot index 5d0b32ee4f..c28be985cf 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -28,30 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC4301: SPD lookup performance* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two -| ... | static IPv4 /24 route entries, one SPD on each outbound interface in -| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only -| ... | outbound traffic is matched and only the last rule is the matching -| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. -| ... | DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only -| ... | the lowest priority rule matching the traffic. The action of the +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ | ... | matching rule is BYPASS. No encryption or authentication is done. -| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -73,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot index 426d31aceb..aeacb8b77a 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -27,29 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC4301: SPD lookup performance* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two -| ... | static IPv4 /24 route entries, one SPD on each outbound interface in -| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only -| ... | outbound traffic is matched and only the last rule is the matching -| ... | rule. DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only -| ... | the lowest priority rule matching the traffic. The action of the +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. DUT1 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ | ... | matching rule is BYPASS. No encryption or authentication is done. -| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index d90cd13d7b..cabcaa7ec1 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr.robot index a274a2dd64..7c75230723 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr.robot @@ -28,29 +28,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +88,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr.robot index 31c8624fe0..a67833b6af 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot index ba807b5615..1cb3c8df5c 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUTs runs IPsec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUTs runs IPsec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index ba94261476..3c6be8b0e1 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -29,29 +29,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -82,9 +88,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot index 3a320ea90c..775a7988fb 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot @@ -29,29 +29,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -82,9 +88,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot index ac3647439d..ad7484f72a 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot @@ -29,29 +29,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -82,9 +88,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot index 08f02dec3a..fcf26db627 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot @@ -29,29 +29,35 @@ | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -82,9 +88,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUTs runs IPsec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUTs runs IPsec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index 4a76407c27..22389da054 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot index aa47c7020d..58c1f8b930 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot index 0478bf6ebc..c718eb4669 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot index ce3c7169e1..a42ecfe088 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot index aa832efc0a..6e1c417a71 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -28,30 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC4301: SPD lookup performance* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two -| ... | static IPv4 /24 route entries, one SPD on each outbound interface in -| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only -| ... | outbound traffic is matched and only the last rule is the matching -| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. -| ... | DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only -| ... | the lowest priority rule matching the traffic. The action of the +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. \ +| ... | DUT1 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ | ... | matching rule is BYPASS. No encryption or authentication is done. -| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -73,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot index 2b0e9dfc32..f6867f9e2d 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -27,29 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC4301: SPD lookup performance* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two -| ... | static IPv4 /24 route entries, one SPD on each outbound interface in -| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only -| ... | outbound traffic is matched and only the last rule is the matching -| ... | rule. DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only -| ... | the lowest priority rule matching the traffic. The action of the +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. DUT1 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ | ... | matching rule is BYPASS. No encryption or authentication is done. -| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot index 2fd02fe978..e58b33cdaf 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -28,30 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC4301: SPD lookup performance* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two -| ... | static IPv4 /24 route entries, one SPD on each outbound interface in -| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only -| ... | outbound traffic is matched and only the last rule is the matching -| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. -| ... | DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only -| ... | the lowest priority rule matching the traffic. The action of the +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. \ +| ... | DUT1 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ | ... | matching rule is BYPASS. No encryption or authentication is done. -| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -73,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot index f6b606f881..80298ddb93 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -27,29 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC4301: SPD lookup performance* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two -| ... | static IPv4 /24 route entries, one SPD on each outbound interface in -| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only -| ... | outbound traffic is matched and only the last rule is the matching -| ... | rule. DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only -| ... | the lowest priority rule matching the traffic. The action of the +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. DUT1 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ | ... | matching rule is BYPASS. No encryption or authentication is done. -| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot index 458c73913d..088f834fb1 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -28,30 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC4301: SPD lookup performance* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two -| ... | static IPv4 /24 route entries, one SPD on each outbound interface in -| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only -| ... | outbound traffic is matched and only the last rule is the matching -| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. -| ... | DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only -| ... | the lowest priority rule matching the traffic. The action of the +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. \ +| ... | DUT1 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ | ... | matching rule is BYPASS. No encryption or authentication is done. -| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -73,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot index 8feb89f9f6..212637eb1c 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -27,21 +27,25 @@ | | Test Template | Local Template | -| Documentation | *RFC4301: SPD lookup performance* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular topology | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, two | ... | static IPv4 /24 route entries, one SPD on each outbound interface in | ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only | ... | outbound traffic is matched and only the last rule is the matching -| ... | rule. DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | rule. DUT1 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. | ... | Test packets are generated by TG on links to DUTs. TG traffic profile | ... | contains two L3 flow-groups (flow-group per direction, 253 flows per | ... | flow-group) with all packets containing Ethernet header, IPv4 header @@ -49,7 +53,8 @@ | ... | addresses of the TG node interfaces. The DUT does SPD lookup with only | ... | the lowest priority rule matching the traffic. The action of the | ... | matching rule is BYPASS. No encryption or authentication is done. -| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index 0870978a88..cf3cfa0a1b 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr.robot index d7decdca41..169f4e60ac 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr.robot index d6b180a6d6..f58e2db1ba 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot index 9539e5c1d0..317d181c17 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot @@ -28,29 +28,36 @@ | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +88,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUTs runs IPsec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUTs runs IPsec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index 39d3370893..4832a75032 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -29,29 +29,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -82,9 +88,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot index 2f04a4fbc0..d7a2ef1ec8 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot @@ -29,29 +29,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -82,9 +88,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot index 4988b114f6..11f3125e78 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot @@ -29,29 +29,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -82,9 +89,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot index 79e8ff04df..cfe5bcd588 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot @@ -29,29 +29,36 @@ | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -82,9 +89,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUTs runs IPsec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUTs runs IPsec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index 0b792ad985..95a1a7384c 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-ndrpdr.robot index 7fc57fca3f..435b26da1a 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-ndrpdr.robot index 201db7cdeb..21a749e030 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.\ -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot index 27ab791e6f..11b5e0dc9d 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index 20ee4f0354..e0863e12dc 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -29,31 +29,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them, run with IPsec async mode and use crypto -| ... | sw scheduler engine to schedule crypto work to crypto cores. DUTs get -| ... | IPv4 traffic from TG, encrypt it and send to another DUT, where packets -| ... | are decrypted and sent back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them, run with IPsec async mode and \ +| ... | use crypto sw scheduler engine to schedule crypto work to crypto \ +| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \ +| ... | DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -86,10 +91,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses one physical core for data plane workers +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | Each DUT uses one physical core for data plane workers \ | | ... | and rest of ${phy_cores} physical core(s) for crypto workers. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot index e41197d1af..50c7a9b953 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot @@ -29,31 +29,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them, run with IPsec async mode and use crypto -| ... | sw scheduler engine to schedule crypto work to crypto cores. DUTs get -| ... | IPv4 traffic from TG, encrypt it and send to another DUT, where packets -| ... | are decrypted and sent back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them, run with IPsec async mode and \ +| ... | use crypto sw scheduler engine to schedule crypto work to crypto \ +| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \ +| ... | DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -86,10 +91,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ -| | ... | Each DUT uses one physical core for data plane workers +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ | | ... | and rest of ${phy_cores} physical core(s) for crypto workers. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot index fb329c4729..4d10947938 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot @@ -29,31 +29,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them, run with IPsec async mode and use crypto -| ... | sw scheduler engine to schedule crypto work to crypto cores. DUTs get -| ... | IPv4 traffic from TG, encrypt it and send to another DUT, where packets -| ... | are decrypted and sent back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them, run with IPsec async mode and \ +| ... | use crypto sw scheduler engine to schedule crypto work to crypto \ +| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \ +| ... | DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -86,10 +91,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ -| | ... | Each DUT uses one physical core for data plane workers +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ | | ... | and rest of ${phy_cores} physical core(s) for crypto workers. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index dee4b478f5..8f43531fee 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -29,31 +29,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them, run with IPsec async mode and use crypto -| ... | sw scheduler engine to schedule crypto work to crypto cores. DUTs get -| ... | IPv4 traffic from TG, encrypt it and send to another DUT, where packets -| ... | are decrypted and sent back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them, run with IPsec async mode and \ +| ... | use crypto sw scheduler engine to schedule crypto work to crypto \ +| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \ +| ... | DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -86,10 +91,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses one physical core for data plane workers +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | Each DUT uses one physical core for data plane workers \ | | ... | and rest of ${phy_cores} physical core(s) for crypto workers. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot index 71b7f45fc3..fece728712 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot @@ -29,31 +29,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them, run with IPsec async mode and use crypto -| ... | sw scheduler engine to schedule crypto work to crypto cores. DUTs get -| ... | IPv4 traffic from TG, encrypt it and send to another DUT, where packets -| ... | are decrypted and sent back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them, run with IPsec async mode and \ +| ... | use crypto sw scheduler engine to schedule crypto work to crypto \ +| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \ +| ... | DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -86,10 +91,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ -| | ... | Each DUT uses one physical core for data plane workers +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ | | ... | and rest of ${phy_cores} physical core(s) for crypto workers. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot index 7e70563f62..f14e9ff223 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot @@ -29,31 +29,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them, run with IPsec async mode and use crypto -| ... | sw scheduler engine to schedule crypto work to crypto cores. DUTs get -| ... | IPv4 traffic from TG, encrypt it and send to another DUT, where packets -| ... | are decrypted and sent back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them, run with IPsec async mode and \ +| ... | use crypto sw scheduler engine to schedule crypto work to crypto \ +| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \ +| ... | DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -86,10 +91,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ -| | ... | Each DUT uses one physical core for data plane workers +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ | | ... | and rest of ${phy_cores} physical core(s) for crypto workers. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index dd84ed6dc2..e30a012a36 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot index 24cb2c61d9..ae41bc227e 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot index 2a6acf83a7..0a433d8255 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot index 636c7a6790..e3ed8b561d 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot @@ -28,27 +28,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Packet loss IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds throughput NDR (Non Drop Rate) \ +| ... | with zero packet loss tolerance, then measures loss at this load \ +| ... | while additional chain is configured. \ +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -80,9 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot index 8a53268750..999cef15d8 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot @@ -28,27 +28,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Packet loss IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds throughput NDR (Non Drop Rate) \ +| ... | with zero packet loss tolerance, then measures loss at this load \ +| ... | while additional chain is configured. \ +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot index e30414841c..fa2a96b71e 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot @@ -28,27 +28,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Packet loss IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds throughput NDR (Non Drop Rate) \ +| ... | with zero packet loss tolerance, then measures loss at this load \ +| ... | while additional chain is configured. \ +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index cfe69ccdab..6d23dd6f68 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot index 19fe7303c9..ec10c0c4ea 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot index 29c71fdce3..749c67bd4d 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot index be942b470a..e35a23475b 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index a1cec33b18..7aa00d3a01 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -29,29 +29,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -82,9 +88,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot index 86ac979a31..6a361a44ec 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot @@ -29,29 +29,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -82,9 +88,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot index 1ef92d2bf4..3da2ab8dc9 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot @@ -29,29 +29,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -82,9 +88,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index bb7a920cb3..bdaa20a0f0 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot index 76105f8160..f7f8eaeb12 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot index 099440e7f6..46d8435bb2 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot index f37bd0f0a8..518f5b749b 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index c49da68213..0e535d1131 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -29,31 +29,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them, run with IPsec async mode and use crypto -| ... | sw scheduler engine to schedule crypto work to crypto cores. DUTs get -| ... | IPv4 traffic from TG, encrypt it and send to another DUT, where packets -| ... | are decrypted and sent back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them, run with IPsec async mode and \ +| ... | use crypto sw scheduler engine to schedule crypto work to crypto \ +| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \ +| ... | DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -86,10 +91,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses one physical core for data plane workers +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | Each DUT uses one physical core for data plane workers \ | | ... | and rest of ${phy_cores} physical core(s) for crypto workers. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot index 9cd961b5d9..73cbbcb429 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot @@ -29,31 +29,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them, run with IPsec async mode and use crypto -| ... | sw scheduler engine to schedule crypto work to crypto cores. DUTs get -| ... | IPv4 traffic from TG, encrypt it and send to another DUT, where packets -| ... | are decrypted and sent back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them, run with IPsec async mode and \ +| ... | use crypto sw scheduler engine to schedule crypto work to crypto \ +| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \ +| ... | DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -86,10 +91,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ -| | ... | Each DUT uses one physical core for data plane workers +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ | | ... | and rest of ${phy_cores} physical core(s) for crypto workers. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot index 581d13b39b..fc6a2f5429 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot @@ -29,31 +29,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them, run with IPsec async mode and use crypto -| ... | sw scheduler engine to schedule crypto work to crypto cores. DUTs get -| ... | IPv4 traffic from TG, encrypt it and send to another DUT, where packets -| ... | are decrypted and sent back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them, run with IPsec async mode and \ +| ... | use crypto sw scheduler engine to schedule crypto work to crypto \ +| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \ +| ... | DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -86,10 +91,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ -| | ... | Each DUT uses one physical core for data plane workers +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ | | ... | and rest of ${phy_cores} physical core(s) for crypto workers. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index 90a124e57a..fe049477f0 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -29,31 +29,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them, run with IPsec async mode and use crypto -| ... | sw scheduler engine to schedule crypto work to crypto cores. DUTs get -| ... | IPv4 traffic from TG, encrypt it and send to another DUT, where packets -| ... | are decrypted and sent back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them, run with IPsec async mode and \ +| ... | use crypto sw scheduler engine to schedule crypto work to crypto \ +| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \ +| ... | DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -86,10 +91,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses one physical core for data plane workers +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | Each DUT uses one physical core for data plane workers \ | | ... | and rest of ${phy_cores} physical core(s) for crypto workers. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot index 1cc1342ef1..debf9848f2 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot @@ -29,31 +29,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them, run with IPsec async mode and use crypto -| ... | sw scheduler engine to schedule crypto work to crypto cores. DUTs get -| ... | IPv4 traffic from TG, encrypt it and send to another DUT, where packets -| ... | are decrypted and sent back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them, run with IPsec async mode and \ +| ... | use crypto sw scheduler engine to schedule crypto work to crypto \ +| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \ +| ... | DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -86,10 +91,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ -| | ... | Each DUT uses one physical core for data plane workers +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ | | ... | and rest of ${phy_cores} physical core(s) for crypto workers. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot index 82beb0b569..9039f44c02 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot @@ -29,31 +29,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them, run with IPsec async mode and use crypto -| ... | sw scheduler engine to schedule crypto work to crypto cores. DUTs get -| ... | IPv4 traffic from TG, encrypt it and send to another DUT, where packets -| ... | are decrypted and sent back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them, run with IPsec async mode and \ +| ... | use crypto sw scheduler engine to schedule crypto work to crypto \ +| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \ +| ... | DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -86,10 +91,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ -| | ... | Each DUT uses one physical core for data plane workers +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ | | ... | and rest of ${phy_cores} physical core(s) for crypto workers. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot index 46ece574f6..ac21dd9592 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -28,28 +28,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ | ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -79,9 +84,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot index c932340dba..cefaf3337b 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -28,28 +28,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ | ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -79,9 +84,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot index 809adff9bb..2e5a9e85a5 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -28,28 +28,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ | ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -79,9 +84,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot index 376c6a7d4e..29bc1f0d4e 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -28,30 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC4301: SPD lookup performance* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two -| ... | static IPv4 /24 route entries, one SPD on each outbound interface in -| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only -| ... | outbound traffic is matched and only the last rule is the matching -| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. -| ... | DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only -| ... | the lowest priority rule matching the traffic. The action of the +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ | ... | matching rule is BYPASS. No encryption or authentication is done. -| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -73,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot index a879952bd8..49414ea5ed 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -27,29 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC4301: SPD lookup performance* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two -| ... | static IPv4 /24 route entries, one SPD on each outbound interface in -| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only -| ... | outbound traffic is matched and only the last rule is the matching -| ... | rule. DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only -| ... | the lowest priority rule matching the traffic. The action of the +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. DUT1 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ | ... | matching rule is BYPASS. No encryption or authentication is done. -| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot index 74e89fb6bf..8c6a893628 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -28,28 +28,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ | ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -79,9 +84,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot index 3e112fe116..e1fd3ac6bd 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -28,28 +28,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ | ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -79,9 +84,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot index c2cb1bce6b..f90534eaa0 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -28,28 +28,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ | ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -79,9 +84,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot index d3e9fa3171..5921cd18ab 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot @@ -28,28 +28,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ | ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -79,9 +84,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot index 30d5b45bab..8d30848dc4 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -28,30 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC4301: SPD lookup performance* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two -| ... | static IPv4 /24 route entries, one SPD on each outbound interface in -| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only -| ... | outbound traffic is matched and only the last rule is the matching -| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. -| ... | DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only -| ... | the lowest priority rule matching the traffic. The action of the +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ | ... | matching rule is BYPASS. No encryption or authentication is done. -| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -73,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot index 62f179f4f6..b9780e2e9e 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -27,29 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC4301: SPD lookup performance* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two -| ... | static IPv4 /24 route entries, one SPD on each outbound interface in -| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only -| ... | outbound traffic is matched and only the last rule is the matching -| ... | rule. DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only -| ... | the lowest priority rule matching the traffic. The action of the +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. DUT1 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ | ... | matching rule is BYPASS. No encryption or authentication is done. -| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot index 0ad9885fab..e7099ab2e5 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -28,30 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC4301: SPD lookup performance* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two -| ... | static IPv4 /24 route entries, one SPD on each outbound interface in -| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only -| ... | outbound traffic is matched and only the last rule is the matching -| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. -| ... | DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only -| ... | the lowest priority rule matching the traffic. The action of the +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ | ... | matching rule is BYPASS. No encryption or authentication is done. -| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -73,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot index bffabe417b..9e2ab54bba 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -27,29 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC4301: SPD lookup performance* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two -| ... | static IPv4 /24 route entries, one SPD on each outbound interface in -| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only -| ... | outbound traffic is matched and only the last rule is the matching -| ... | rule. DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only -| ... | the lowest priority rule matching the traffic. The action of the +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. DUT1 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ | ... | matching rule is BYPASS. No encryption or authentication is done. -| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot index dbc4bc4432..0cae13aaf8 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -28,30 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC4301: SPD lookup performance* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two -| ... | static IPv4 /24 route entries, one SPD on each outbound interface in -| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only -| ... | outbound traffic is matched and only the last rule is the matching -| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. -| ... | DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only -| ... | the lowest priority rule matching the traffic. The action of the +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ | ... | matching rule is BYPASS. No encryption or authentication is done. -| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -73,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot index 3e3ca4d12c..9a3c82e52e 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -27,29 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC4301: SPD lookup performance* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two -| ... | static IPv4 /24 route entries, one SPD on each outbound interface in -| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only -| ... | outbound traffic is matched and only the last rule is the matching -| ... | rule. DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only -| ... | the lowest priority rule matching the traffic. The action of the +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. DUT1 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ | ... | matching rule is BYPASS. No encryption or authentication is done. -| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot index 410b840bfb..7e751d8ac3 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -28,28 +28,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ | ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -79,9 +84,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot index ec3420c06a..c7d601404f 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -28,28 +28,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ | ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -79,9 +84,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot index ee23412eeb..d8f55b808d 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -28,28 +28,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ | ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -79,9 +84,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot index 75d0584eaa..7698f93105 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot @@ -28,28 +28,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ | ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -79,9 +84,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot index 17ab11ff43..bcfe4b27f0 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -29,29 +29,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG, run with IPsec async mode and use crypto -| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto \ +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \ | ... | IPv4 traffic from TG, encrypts it and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -83,10 +88,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses one physical core for data plane workers +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | Each DUT uses one physical core for data plane workers \ | | ... | and rest of ${phy_cores} physical core(s) for crypto workers. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot index 2a8fb61ab2..7681e1f2dc 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -29,29 +29,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG, run with IPsec async mode and use crypto -| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto \ +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \ | ... | IPv4 traffic from TG, encrypts it and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -83,10 +88,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ -| | ... | Each DUT uses one physical core for data plane workers +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ | | ... | and rest of ${phy_cores} physical core(s) for crypto workers. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot index 48c455d2f5..c137dd31be 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -29,29 +29,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG, run with IPsec async mode and use crypto -| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto \ +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \ | ... | IPv4 traffic from TG, encrypts it and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -83,10 +88,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ -| | ... | Each DUT uses one physical core for data plane workers +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ | | ... | and rest of ${phy_cores} physical core(s) for crypto workers. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot index 7d617d6501..0f4cdedc99 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -29,29 +29,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG, run with IPsec async mode and use crypto -| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto \ +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \ | ... | IPv4 traffic from TG, encrypts it and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -83,10 +88,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses one physical core for data plane workers +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | Each DUT uses one physical core for data plane workers \ | | ... | and rest of ${phy_cores} physical core(s) for crypto workers. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot index 6a143a37f2..e7f965da23 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -29,29 +29,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG, run with IPsec async mode and use crypto -| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto \ +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \ | ... | IPv4 traffic from TG, encrypts it and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -83,10 +88,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ -| | ... | Each DUT uses one physical core for data plane workers +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ | | ... | and rest of ${phy_cores} physical core(s) for crypto workers. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot index ca3e08225c..c9de66e8fc 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -29,29 +29,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG, run with IPsec async mode and use crypto -| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto \ +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \ | ... | IPv4 traffic from TG, encrypts it and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -83,10 +88,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ -| | ... | Each DUT uses one physical core for data plane workers +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ | | ... | and rest of ${phy_cores} physical core(s) for crypto workers. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot index d52dc0372f..a3a53362f8 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -28,28 +28,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ | ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -79,9 +84,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot index f5fdcf0b5d..d6a2a6a77b 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -28,28 +28,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ | ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -79,9 +84,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot index d11eb54901..4b0fe7f205 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -28,28 +28,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ | ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -79,9 +84,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot index 69d2833ea2..49d121a7d2 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot @@ -28,27 +28,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Packet loss IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ | ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional tunnels are configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains one L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds throughput NDR (Non Drop Rate) \ +| ... | with zero packet loss tolerance, then measures loss at this load \ +| ... | while additional tunnels are configured. \ +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -79,9 +83,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot index 1e637f669b..d0e11c7647 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot @@ -28,27 +28,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Packet loss IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ | ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional tunnels are configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains one L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds throughput NDR (Non Drop Rate) \ +| ... | with zero packet loss tolerance, then measures loss at this load \ +| ... | while additional tunnels are configured. \ +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -79,9 +83,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot index e8364bfbd0..3d4f5c953b 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot @@ -28,27 +28,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Packet loss IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ | ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional tunnels are configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains one L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds throughput NDR (Non Drop Rate) \ +| ... | with zero packet loss tolerance, then measures loss at this load \ +| ... | while additional tunnels are configured. \ +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -79,9 +83,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot index 846db8db00..1b05438414 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -28,28 +28,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ | ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -79,9 +84,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot index 82dba4de48..b667af1a30 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -28,28 +28,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ | ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -79,9 +84,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot index e8f38cad6b..cc531125ef 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -28,28 +28,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ | ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -79,9 +84,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot index 6e3f567080..7b68c96bec 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot @@ -28,28 +28,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ | ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -79,9 +84,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot index 866242482b..a3b5be07b5 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -28,28 +28,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ | ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -79,9 +84,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot index a563b4624e..073addc9da 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -28,28 +28,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ | ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -79,9 +84,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot index 0b5ec6e216..692412b8fb 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -28,28 +28,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ | ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -79,9 +84,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot index 656aa2c5fe..faee83f1c0 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot @@ -28,28 +28,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ | ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -79,9 +84,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot index 9546a3cb24..cc9522880e 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -29,29 +29,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG, run with IPsec async mode and use crypto -| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto \ +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \ | ... | IPv4 traffic from TG, encrypts it and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -83,10 +88,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses one physical core for data plane workers +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | Each DUT uses one physical core for data plane workers \ | | ... | and rest of ${phy_cores} physical core(s) for crypto workers. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot index f0cfa03a01..1bd07d85c1 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -29,29 +29,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG, run with IPsec async mode and use crypto -| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto \ +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \ | ... | IPv4 traffic from TG, encrypts it and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -83,10 +88,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ -| | ... | Each DUT uses one physical core for data plane workers +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ | | ... | and rest of ${phy_cores} physical core(s) for crypto workers. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot index 9156265724..1afd38fe11 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -29,29 +29,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG, run with IPsec async mode and use crypto -| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto \ +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \ | ... | IPv4 traffic from TG, encrypts it and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -83,10 +88,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ -| | ... | Each DUT uses one physical core for data plane workers +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ | | ... | and rest of ${phy_cores} physical core(s) for crypto workers. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot index d717cd06b7..951aba35e8 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -29,29 +29,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG, run with IPsec async mode and use crypto -| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto \ +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \ | ... | IPv4 traffic from TG, encrypts it and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -83,10 +88,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses one physical core for data plane workers +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | Each DUT uses one physical core for data plane workers \ | | ... | and rest of ${phy_cores} physical core(s) for crypto workers. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot index 5e7c2e0c6e..6df954a4aa 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -29,29 +29,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG, run with IPsec async mode and use crypto -| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto \ +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \ | ... | IPv4 traffic from TG, encrypts it and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -83,10 +88,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ -| | ... | Each DUT uses one physical core for data plane workers +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ | | ... | and rest of ${phy_cores} physical core(s) for crypto workers. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot index 94d6222d23..e21e4fbf52 100644 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -29,29 +29,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG, run with IPsec async mode and use crypto -| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto \ +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \ | ... | IPv4 traffic from TG, encrypts it and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -83,10 +88,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ -| | ... | Each DUT uses one physical core for data plane workers +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ | | ... | and rest of ${phy_cores} physical core(s) for crypto workers. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2tap-gso-iperf3-mrr.robot b/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2tap-gso-iperf3-mrr.robot index b7b90a8198..5b4aa39551 100644 --- a/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2tap-gso-iperf3-mrr.robot +++ b/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2tap-gso-iperf3-mrr.robot @@ -26,14 +26,19 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases with TAPv2* -| -| ... | *[Top] Network Topologies:* DUT1 1-node topology without physical links. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing. -| ... | *[Ver] TG verification:* iPerf3 client/server is used for Packet\ +| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases with TAPv2** +| ... | +| ... | - **[Top] Network Topologies:** DUT1 1-node topology without physical \ +| ... | links. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing. +| ... | +| ... | - **[Ver] TG verification:** iPerf3 client/server is used for Packet \ | ... | generation and verification. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | ping_plugin.so | perfmon_plugin.so @@ -72,9 +77,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT configuration: DUT1 is configured with IPv4 routing. -| | ... | [Ver] Measure MaxReceivedRate for ${frame_size}B frames\ -| | ... | using burst trials throughput test.\ +| | ... | - **[Cfg]** DUT configuration: DUT1 is configured with IPv4 routing. +| | ... | - **[Ver]** Measure MaxReceivedRate for ${frame_size}B frames \ +| | ... | using burst trials throughput test. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer. Type: integer, string diff --git a/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2tap-iperf3-mrr.robot b/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2tap-iperf3-mrr.robot index f2392ae562..dddf50b2eb 100644 --- a/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2tap-iperf3-mrr.robot +++ b/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2tap-iperf3-mrr.robot @@ -26,14 +26,19 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases with TAPv2* -| -| ... | *[Top] Network Topologies:* DUT1 1-node topology without physical links. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing. -| ... | *[Ver] TG verification:* iPerf3 client/server is used for Packet\ +| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases with TAPv2** +| ... | +| ... | - **[Top] Network Topologies:** DUT1 1-node topology without physical \ +| ... | links. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing. +| ... | +| ... | - **[Ver] TG verification:** iPerf3 client/server is used for Packet \ | ... | generation and verification. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | ping_plugin.so | perfmon_plugin.so @@ -72,9 +77,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT configuration: DUT1 is configured with IPv4 routing. -| | ... | [Ver] Measure MaxReceivedRate for ${frame_size}B frames\ -| | ... | using burst trials throughput test.\ +| | ... | - **[Cfg]** DUT configuration: DUT1 is configured with IPv4 routing. +| | ... | - **[Ver]** Measure MaxReceivedRate for ${frame_size}B frames \ +| | ... | using burst trials throughput test. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer. Type: integer, string diff --git a/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2vhost-gso-iperf3-mrr.robot b/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2vhost-gso-iperf3-mrr.robot index ce83dd8f22..a2ece2f89a 100644 --- a/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2vhost-gso-iperf3-mrr.robot +++ b/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2vhost-gso-iperf3-mrr.robot @@ -26,14 +26,19 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases with VHOST* -| -| ... | *[Top] Network Topologies:* DUT1 1-node topology without physical links. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing. -| ... | *[Ver] TG verification:* iPerf3 client/server is used for Packet\ +| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases with VHOST** +| ... | +| ... | - **[Top] Network Topologies:** DUT1 1-node topology without physical \ +| ... | links. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing. +| ... | +| ... | - **[Ver] TG verification:** iPerf3 client/server is used for Packet \ | ... | generation and verification. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | ping_plugin.so | perfmon_plugin.so @@ -76,9 +81,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT configuration: DUT1 is configured with IPv4 routing. -| | ... | [Ver] Measure MaxReceivedRate for ${frame_size}B frames\ -| | ... | using burst trials throughput test.\ +| | ... | - **[Cfg]** DUT configuration: DUT1 is configured with IPv4 routing. +| | ... | - **[Ver]** Measure MaxReceivedRate for ${frame_size}B frames \ +| | ... | using burst trials throughput test. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer. Type: integer, string diff --git a/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2vhost-iperf3-mrr.robot b/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2vhost-iperf3-mrr.robot index 3d6d174970..def7e9ce63 100644 --- a/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2vhost-iperf3-mrr.robot +++ b/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2vhost-iperf3-mrr.robot @@ -26,14 +26,19 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases with VHOST* -| -| ... | *[Top] Network Topologies:* DUT1 1-node topology without physical links. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing. -| ... | *[Ver] TG verification:* iPerf3 client/server is used for Packet\ +| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases with VHOST** +| ... | +| ... | - **[Top] Network Topologies:** DUT1 1-node topology without physical \ +| ... | links. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing. +| ... | +| ... | - **[Ver] TG verification:** iPerf3 client/server is used for Packet \ | ... | generation and verification. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | ping_plugin.so | perfmon_plugin.so @@ -76,9 +81,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT configuration: DUT1 is configured with IPv4 routing. -| | ... | [Ver] Measure MaxReceivedRate for ${frame_size}B frames\ -| | ... | using burst trials throughput test.\ +| | ... | - **[Cfg]** DUT configuration: DUT1 is configured with IPv4 routing. +| | ... | - **[Ver]** Measure MaxReceivedRate for ${frame_size}B frames \ +| | ... | using burst trials throughput test. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer. Type: integer, string diff --git a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpbase-ldpreload-iperf3-bps.robot b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpbase-ldpreload-iperf3-bps.robot index ced96a7f00..49b4671a8a 100644 --- a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpbase-ldpreload-iperf3-bps.robot +++ b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpbase-ldpreload-iperf3-bps.robot @@ -29,13 +29,16 @@ | | Test Template | Local template | -| Documentation | *Iperf3 client -> Iperf3 server goodput.* -| -| ... | *[Top] Network Topologies:* DUT-DUT 2-node topology +| Documentation | **Iperf3 client -> Iperf3 server goodput.** +| ... | +| ... | - **[Top] Network Topologies:** DUT-DUT 2-node topology \ | ... | with single link between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP -| ... | *[Cfg] DUT configuration:* -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP +| ... | +| ... | - **[Cfg] DUT configuration:** +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so diff --git a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpbase-nsim-ldpreload-iperf3-bps.robot b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpbase-nsim-ldpreload-iperf3-bps.robot index 7ee2d0e4f9..48bf68c5d2 100644 --- a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpbase-nsim-ldpreload-iperf3-bps.robot +++ b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpbase-nsim-ldpreload-iperf3-bps.robot @@ -29,13 +29,16 @@ | | Test Template | Local template | -| Documentation | *Iperf3 client -> Iperf3 server goodput. -| -| ... | *[Top] Network Topologies:* DUT-DUT 2-node topology +| Documentation | **Iperf3 client -> Iperf3 server goodput.** +| ... | +| ... | - **[Top] Network Topologies:** DUT-DUT 2-node topology \ | ... | with single link between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP -| ... | *[Cfg] DUT configuration:* -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP +| ... | +| ... | - **[Cfg] DUT configuration:** +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nsim_plugin.so diff --git a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpscale1cl10s-ldpreload-iperf3-bps.robot b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpscale1cl10s-ldpreload-iperf3-bps.robot index 9d4e955231..2e7f39d29e 100644 --- a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpscale1cl10s-ldpreload-iperf3-bps.robot +++ b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpscale1cl10s-ldpreload-iperf3-bps.robot @@ -29,13 +29,16 @@ | | Test Template | Local template | -| Documentation | *Iperf3 client -> Iperf3 server goodput. -| -| ... | *[Top] Network Topologies:* DUT-DUT 2-node topology +| Documentation | **Iperf3 client -> Iperf3 server goodput.** +| ... | +| ... | - **[Top] Network Topologies:** DUT-DUT 2-node topology \ | ... | with single link between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP -| ... | *[Cfg] DUT configuration:* -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP +| ... | +| ... | - **[Cfg] DUT configuration:** +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so diff --git a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpscale1cl10s-nsim-ldpreload-iperf3-bps.robot b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpscale1cl10s-nsim-ldpreload-iperf3-bps.robot index 0d23be31c9..7c272a120d 100644 --- a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpscale1cl10s-nsim-ldpreload-iperf3-bps.robot +++ b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpscale1cl10s-nsim-ldpreload-iperf3-bps.robot @@ -29,13 +29,16 @@ | | Test Template | Local template | -| Documentation | *Iperf3 client -> Iperf3 server goodput. -| -| ... | *[Top] Network Topologies:* DUT-DUT 2-node topology +| Documentation | **Iperf3 client -> Iperf3 server goodput.** +| ... | +| ... | - **[Top] Network Topologies:** DUT-DUT 2-node topology \ | ... | with single link between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP -| ... | *[Cfg] DUT configuration:* -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP +| ... | +| ... | - **[Cfg] DUT configuration:** +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nsim_plugin.so diff --git a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpbase-ldpreload-iperf3-bps.robot b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpbase-ldpreload-iperf3-bps.robot index d82be0b1ad..a4aa2a06b4 100644 --- a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpbase-ldpreload-iperf3-bps.robot +++ b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpbase-ldpreload-iperf3-bps.robot @@ -29,13 +29,16 @@ | | Test Template | Local template | -| Documentation | *Iperf3 client -> Iperf3 server goodput. -| -| ... | *[Top] Network Topologies:* DUT-DUT 2-node topology +| Documentation | **Iperf3 client -> Iperf3 server goodput.** +| ... | +| ... | - **[Top] Network Topologies:** DUT-DUT 2-node topology \ | ... | with single link between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP -| ... | *[Cfg] DUT configuration:* -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP +| ... | +| ... | - **[Cfg] DUT configuration:** +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so diff --git a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicbase-vppecho-bps.robot b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicbase-vppecho-bps.robot index bd60ac4962..199e652d91 100644 --- a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicbase-vppecho-bps.robot +++ b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicbase-vppecho-bps.robot @@ -28,13 +28,16 @@ | | Test Template | Local template | -| Documentation | *QUIC Unidirectional Echo Client -> Echo Server goodput. -| -| ... | *[Top] Network Topologies:* DUT-DUT 2-node topology +| Documentation | **QUIC Unidirectional Echo Client -> Echo Server goodput.** +| ... | +| ... | - **[Top] Network Topologies:** DUT-DUT 2-node topology \ | ... | with single link between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP-QUIC -| ... | *[Cfg] DUT configuration:* -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP-QUIC +| ... | +| ... | - **[Cfg] DUT configuration:** +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | quic_plugin.so diff --git a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicscale10cl10s-vppecho-bps.robot b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicscale10cl10s-vppecho-bps.robot index f92770a700..9bb0975080 100644 --- a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicscale10cl10s-vppecho-bps.robot +++ b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicscale10cl10s-vppecho-bps.robot @@ -29,13 +29,16 @@ | | Test Template | Local template | -| Documentation | *QUIC Unidirectional Echo Client -> Echo Server goodput. -| -| ... | *[Top] Network Topologies:* DUT-DUT 2-node topology +| Documentation | **QUIC Unidirectional Echo Client -> Echo Server goodput.** +| ... | +| ... | - **[Top] Network Topologies:** DUT-DUT 2-node topology \ | ... | with single link between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP-QUIC -| ... | *[Cfg] DUT configuration:* -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP-QUIC +| ... | +| ... | - **[Cfg] DUT configuration:** +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | quic_plugin.so diff --git a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicscale10cl1s-vppecho-bps.robot b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicscale10cl1s-vppecho-bps.robot index f71563e442..cc34797eac 100644 --- a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicscale10cl1s-vppecho-bps.robot +++ b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicscale10cl1s-vppecho-bps.robot @@ -29,13 +29,16 @@ | | Test Template | Local template | -| Documentation | *QUIC Unidirectional Echo Client -> Echo Server goodput. -| -| ... | *[Top] Network Topologies:* DUT-DUT 2-node topology +| Documentation | **QUIC Unidirectional Echo Client -> Echo Server goodput.** +| ... | +| ... | - **[Top] Network Topologies:** DUT-DUT 2-node topology \ | ... | with single link between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP-QUIC -| ... | *[Cfg] DUT configuration:* -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP-QUIC +| ... | +| ... | - **[Cfg] DUT configuration:** +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | quic_plugin.so diff --git a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicscale1cl10s-vppecho-bps.robot b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicscale1cl10s-vppecho-bps.robot index 0092b44be5..52f399c8e4 100644 --- a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicscale1cl10s-vppecho-bps.robot +++ b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicscale1cl10s-vppecho-bps.robot @@ -29,13 +29,16 @@ | | Test Template | Local template | -| Documentation | *QUIC Unidirectional Echo Client -> Echo Server goodput. -| -| ... | *[Top] Network Topologies:* DUT-DUT 2-node topology +| Documentation | **QUIC Unidirectional Echo Client -> Echo Server goodput.** +| ... | +| ... | - **[Top] Network Topologies:** DUT-DUT 2-node topology \ | ... | with single link between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP-QUIC -| ... | *[Cfg] DUT configuration:* -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP-QUIC +| ... | +| ... | - **[Cfg] DUT configuration:** +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | quic_plugin.so diff --git a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpscale1cl10s-ldpreload-iperf3-bps.robot b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpscale1cl10s-ldpreload-iperf3-bps.robot index 0383c0d328..d452f88972 100644 --- a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpscale1cl10s-ldpreload-iperf3-bps.robot +++ b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpscale1cl10s-ldpreload-iperf3-bps.robot @@ -29,13 +29,16 @@ | | Test Template | Local template | -| Documentation | *Iperf3 client -> Iperf3 server goodput. -| -| ... | *[Top] Network Topologies:* DUT-DUT 2-node topology +| Documentation | **Iperf3 client -> Iperf3 server goodput.** +| ... | +| ... | - **[Top] Network Topologies:** DUT-DUT 2-node topology \ | ... | with single link between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP -| ... | *[Cfg] DUT configuration:* -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP +| ... | +| ... | - **[Cfg] DUT configuration:** +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so diff --git a/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_14_2-cps.robot b/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_14_2-cps.robot index e27254ccd7..61c9d64aa5 100644 --- a/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_14_2-cps.robot +++ b/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_14_2-cps.robot @@ -26,14 +26,18 @@ | | Test Template | Local Template | -| Documentation | *TCP requests per seconds.* -| -| ... | *[Top] Network Topologies:* TG-DUT-TG 2-node topology\ +| Documentation | **TCP requests per seconds.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT-TG 2-node topology \ | ... | with single link between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP-HTTP for TCP -| ... | *[Cfg] DUT configuration:* -| ... | *[Ver] TG verification:* -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP-HTTP for TCP +| ... | +| ... | - **[Cfg] DUT configuration:** +| ... | +| ... | - **[Ver] TG verification:** +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so diff --git a/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_14_2-rps.robot b/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_14_2-rps.robot index 71d2898ad4..1ba2c4ac16 100644 --- a/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_14_2-rps.robot +++ b/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_14_2-rps.robot @@ -26,14 +26,18 @@ | | Test Template | Local Template | -| Documentation | *TCP requests per seconds.* -| -| ... | *[Top] Network Topologies:* TG-DUT-TG 2-node topology\ +| Documentation | **TCP requests per seconds.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT-TG 2-node topology \ | ... | with single link between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP-HTTP for TCP -| ... | *[Cfg] DUT configuration:* -| ... | *[Ver] TG verification:* -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP-HTTP for TCP +| ... | +| ... | - **[Cfg] DUT configuration:** +| ... | +| ... | - **[Ver] TG verification:** +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so diff --git a/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_15_0-cps.robot b/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_15_0-cps.robot index a1cadd7020..af2d7344d5 100644 --- a/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_15_0-cps.robot +++ b/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_15_0-cps.robot @@ -26,14 +26,18 @@ | | Test Template | Local Template | -| Documentation | *TCP requests per seconds.* -| -| ... | *[Top] Network Topologies:* TG-DUT-TG 2-node topology\ +| Documentation | **TCP requests per seconds.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT-TG 2-node topology \ | ... | with single link between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP-HTTP for TCP -| ... | *[Cfg] DUT configuration:* -| ... | *[Ver] TG verification:* -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP-HTTP for TCP +| ... | +| ... | - **[Cfg] DUT configuration:** +| ... | +| ... | - **[Ver] TG verification:** +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so diff --git a/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_15_0-rps.robot b/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_15_0-rps.robot index 9dfe2be13d..0b548fadcd 100644 --- a/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_15_0-rps.robot +++ b/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_15_0-rps.robot @@ -26,14 +26,18 @@ | | Test Template | Local Template | -| Documentation | *TCP requests per seconds.* -| -| ... | *[Top] Network Topologies:* TG-DUT-TG 2-node topology\ +| Documentation | **TCP requests per seconds.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT-TG 2-node topology \ | ... | with single link between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP-HTTP for TCP -| ... | *[Cfg] DUT configuration:* -| ... | *[Ver] TG verification:* -| ... | *[Ref] Applicable standard specifications:* +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP-HTTP for TCP +| ... | +| ... | - **[Cfg] DUT configuration:** +| ... | +| ... | - **[Ver] TG verification:** +| ... | +| ... | - **[Ref] Applicable standard specifications:** *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so diff --git a/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot index 8fc96ca296..4d771000a8 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot @@ -26,28 +26,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 routing with IEEE 802.1Q test\ -| ... | cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. IEEE 802.1Q\ -| ... | tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and two static IPv4 /30 route entries. DUT1 and DUT2 tested\ -| ... | with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are\ -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\ -| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP\ -| ... | protocol=61 and static payload. MAC addresses are matching MAC\ +| Documentation | **RFC2544: Pkt throughput IPv4 routing with IEEE 802.1Q \ +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. \ +| ... | IEEE 802.1Q tagging is applied on link between DUT1 and DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and two static IPv4 /30 route entries. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are \ +| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 \ +| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs IPv4 routing with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs IPv4 routing with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot index 860e088a83..05dfe49d58 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot @@ -26,26 +26,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 allowlist test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing, two static IPv4 /24 routes and IPv4 ADL security allowlist -| ... | ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG. -| ... | DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput IPv4 allowlist test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4 \ +| ... | routing, two static IPv4 /24 routes and IPv4 ADL security allowlist \ +| ... | ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | adl_plugin.so @@ -64,9 +69,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. \ +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot index 374eb3de65..fcc0b82d33 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot @@ -26,26 +26,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 iAcl whitelist test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing, two static IPv4 /24 routes and IPv4 iAcl security whitelist -| ... | ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG. -| ... | DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv6 header -| ... | and generated payload. MAC addresses are matching MAC addresses +| Documentation | **RFC2544: Pkt throughput IPv4 iAcl whitelist test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4 \ +| ... | routing, two static IPv4 /24 routes and IPv4 iAcl security whitelist \ +| ... | ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header \ +| ... | and generated payload. MAC addresses are matching MAC addresses \ | ... | of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -64,9 +69,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot index fad4d1cb0d..0fe5751ff4 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 policer test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing and two static IPv4 /24 route entries and policer with 2R3C -| ... | color-aware configuration. Policer is applied on links TG - DUT1 and -| ... | DUT2 - TG. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv6 header -| ... | and generated payload. MAC addresses are matching MAC addresses +| Documentation | **RFC2544: Pkt throughput IPv4 policer test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4 \ +| ... | routing and two static IPv4 /24 route entries and policer with 2R3C \ +| ... | color-aware configuration. Policer is applied on links TG - DUT1 and \ +| ... | DUT2 - TG. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header \ +| ... | and generated payload. MAC addresses are matching MAC addresses \ | ... | of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC2698. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC2698. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -68,9 +73,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ndrpdr.robot index 0907eb1a18..6161cef189 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing and two static IPv4 /24 route entries. DUT1 and DUT2 tested with -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ +| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 and DUT2 are \ +| ... | tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -64,9 +69,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot index 0548f6fc33..cb9b486411 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and 2x100k static IPv4 /32 route entries. DUT1 and DUT2 tested\ -| ... | with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ +| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and 2x100k static IPv4 /32 route entries. DUT1 and DUT2 are \ +| ... | tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -65,9 +70,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-rnd-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-rnd-ndrpdr.robot index 1e7850350f..f5f0f6d862 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-rnd-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-rnd-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and 2x100k static IPv4 /32 route entries. DUT1 and DUT2 tested\ -| ... | with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains 2 randomized L3 flow-groups (flow-group per direction, 100k\ -| ... | flows per flow-group) with all packets containing Ethernet header,\ -| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are\ +| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and 2x100k static IPv4 /32 route entries. DUT1 and DUT2 are \ +| ... | tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains 2 randomized L3 flow-groups (flow-group per direction, 100k \ +| ... | flows per flow-group) with all packets containing Ethernet header, \ +| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -65,9 +70,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot index b0094d51f1..46a544bbc6 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and 2x10k static IPv4 /32 route entries. DUT1 and DUT2 tested\ -| ... | with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ +| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and 2x10k static IPv4 /32 route entries. DUT1 and DUT2 are \ +| ... | tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -65,9 +70,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-rnd-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-rnd-ndrpdr.robot index b2f006020b..451bdf2e5a 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-rnd-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-rnd-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and 2x10k static IPv4 /32 route entries. DUT1 and DUT2 tested\ -| ... | with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains 2 randomized L3 flow-groups (flow-group per direction, 10k\ -| ... | flows per flow-group) with all packets containing Ethernet header,\ -| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are\ +| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and 2x10k static IPv4 /32 route entries. DUT1 and DUT2 are \ +| ... | tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains 2 randomized L3 flow-groups (flow-group per direction, 10k \ +| ... | flows per flow-group) with all packets containing Ethernet header, \ +| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -65,9 +70,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot index 4e7edfb7ec..24be059f98 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and 2x1M static IPv4 /32 route entries. DUT1 and DUT2 tested\ -| ... | with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ +| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and 2x1M static IPv4 /32 route entries. DUT1 and DUT2 are \ +| ... | tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -65,9 +70,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-rnd-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-rnd-ndrpdr.robot index f4af0dc353..a593b32556 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-rnd-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-rnd-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and 2x1M static IPv4 /32 route entries. DUT1 and DUT2 tested\ -| ... | with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains 2 randomized L3 flow-groups (flow-group per direction, 1M\ -| ... | flows per flow-group) with all packets containing Ethernet header,\ -| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are\ +| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and 2x1M static IPv4 /32 route entries. DUT1 and DUT2 are \ +| ... | tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains 2 randomized L3 flow-groups (flow-group per direction, 1M \ +| ... | flows per flow-group) with all packets containing Ethernet header, \ +| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -65,9 +70,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot index 4863836616..b68aa218d0 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot index 8b5406c72e..62b3e6c7fc 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot index 6bf8cb4146..625fae6c0a 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot index f7110b6b8e..c8f646f41a 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot index ca10e870e1..7d072e555b 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot index b526d7295a..fb9ac80bf2 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot index f8f4b14cfd..e38db8e231 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot index 3908412c6d..918ed659b7 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot index e7c22a5bef..d21045a7d1 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -81,9 +86,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot index d33403adad..58271d3c56 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot index 13a899fa04..a5d928edb5 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot index 3454d07f6b..9ef49dc925 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -81,9 +86,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot index 917ec78ffe..5d8d8d3ea1 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot index ec8019d34f..a11300ca9b 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot index 0c1dd8174e..d3833e3723 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -81,9 +86,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot index f6c9126edf..603b512ae3 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot index 2d7ed83ec2..fda09c44f8 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot index b2b846b2e5..628c4aa92b 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -81,9 +86,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot index 1f3a36755d..cef9a2bc33 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \ +| ... | tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot index 5dce28d2e5..451ffec339 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \ +| ... | tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot index ae7aabf9d2..f52d0431ee 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \ +| ... | tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot index e25baecde7..ba4cf482b5 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \ +| ... | tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot index 7bb646a460..2c908cfb28 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \ +| ... | tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot index c51bba552b..1a1bf0f9d4 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \ +| ... | tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot index 5be5a27500..f43f3cc8eb 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \ +| ... | tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot index 39766dad68..b1d6c981e0 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \ +| ... | tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot index e3e6d22dc9..912b63da32 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \ +| ... | tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot index 2f279b221c..fa83982287 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \ +| ... | tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot index 49635a0cb4..04bb3211fa 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \ +| ... | tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot index 6c8b88e613..f574196840 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \ +| ... | tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot index b24146165d..4be9055071 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \ +| ... | tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot index fdabe0d503..40d37e611e 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \ +| ... | tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot index 24b5c649a7..273b5e2a79 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \ +| ... | tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot index 0b72666faf..7a0ecc5599 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \ +| ... | tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot index 102e838e45..3e6e11906a 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \ +| ... | tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot index a4f4458cb4..01392e4aaf 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ -| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \ +| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \ +| ... | tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot index 2b2d94bde0..b844840778 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot @@ -26,27 +26,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 routing with IEEE 802.1Q test\ -| ... | cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. IEEE 802.1Q\ -| ... | tagging is applied on link between DUT1-if2 and TG-if2. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\ -| ... | two static IPv4 /30 route entries. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are\ -| ... | generated by TG on links to DUT1. TG traffic profile contains two L3\ -| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP\ -| ... | protocol=61 and static payload. MAC addresses are matching MAC\ +| Documentation | **RFC2544: Pkt throughput IPv4 routing with IEEE 802.1Q test \ +| ... | cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. \ +| ... | IEEE 802.1Q tagging is applied on link between DUT1-if2 and TG-if2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and two static IPv4 /30 route entries. DUT1 is tested with \ +| ... | ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are \ +| ... | generated by TG on links to DUT1. TG traffic profile contains two L3 \ +| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -70,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs IPv4 routing with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs IPv4 routing with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot index d8f85a2375..478f7d973e 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot @@ -26,26 +26,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 allowlist test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 allowlist test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing, two static IPv4 /24 routes and IPv4 ADL security allowlist -| ... | ingress /24 filter entries applied on links TG - DUT1. -| ... | DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing, two static IPv4 /24 routes and IPv4 ADL security allowlist \ +| ... | ingress /24 filter entries applied on links TG - DUT1. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | adl_plugin.so @@ -64,9 +69,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. \ +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot index 2f6021e695..c2a790a2eb 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot @@ -26,26 +26,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 iAcl whitelist test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 iAcl whitelist test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 -| ... | routing, two static IPv4 /24 routes and IPv4 iAcl security whitelist -| ... | ingress /24 filter entries applied on links TG - DUT1. -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv6 header -| ... | and generated payload. MAC addresses are matching MAC addresses +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing, two static IPv4 /24 routes and IPv4 iAcl security whitelist \ +| ... | ingress /24 filter entries applied on links TG - DUT1. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header \ +| ... | and generated payload. MAC addresses are matching MAC addresses \ | ... | of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -64,9 +69,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot index 867026f85f..3603125e1b 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot @@ -26,25 +26,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 policer test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput IPv4 policer test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\ -| ... | two IPv4 ARP entries and policer with 2R3C color-aware configuration.\ -| ... | Policer is applied on links TG - DUT1. DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ -| ... | and generated payload. MAC addresses are matching MAC addresses\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and two IPv4 ARP entries and policer with 2R3C color-aware \ +| ... | configuration. Policer is applied on links TG - DUT1. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header \ +| ... | and generated payload. MAC addresses are matching MAC addresses \ | ... | of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC2698. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC2698. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -66,9 +72,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ndrpdr.robot index 8248487265..4679b9b9bd 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with -| ... | ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -63,9 +68,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot index 212e8d8ac6..a894529ff2 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot @@ -26,24 +26,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\ -| ... | 2x100k static IPv4 /32 route entries. DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and 2x100k static IPv4 /32 route entries. DUT1 is tested with \ +| ... | ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -64,9 +70,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-rnd-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-rnd-ndrpdr.robot index 4f3d56c4e7..f7ce70c3bf 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-rnd-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-rnd-ndrpdr.robot @@ -27,24 +27,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\ -| ... | 2x100k static IPv4 /32 route entries. DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains 2 randomized L3 flow-groups (flow-group per direction, 100k\ -| ... | flows per flow-group) with all packets containing Ethernet header,\ -| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and 2x100k static IPv4 /32 route entries. DUT1 is tested with \ +| ... | ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains 2 randomized L3 flow-groups (flow-group per direction, 100k \ +| ... | flows per flow-group) with all packets containing Ethernet header, \ +| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -65,9 +71,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot index 8bcec57de5..27cc66acc5 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot @@ -26,24 +26,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\ -| ... | 2x10k static IPv4 /32 route entries. DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ -| ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and 2x10k static IPv4 /32 route entries. DUT1 is tested with \ +| ... | ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic \ +| ... | profile contains two L3 flow-groups (flow-group per direction, \ +| ... | 10k flows per flow-group) with all packets containing Ethernet header, \ +| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are \ +| ... | matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -64,9 +70,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-rnd-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-rnd-ndrpdr.robot index 7e8fe1d587..d900f5f66c 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-rnd-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-rnd-ndrpdr.robot @@ -27,24 +27,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\ -| ... | 2x10k static IPv4 /32 route entries. DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains 2 randomized L3 flow-groups (flow-group per direction, 10k\ -| ... | flows per flow-group) with all packets containing Ethernet header,\ -| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and 2x10k static IPv4 /32 route entries. DUT1 is tested with \ +| ... | ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains 2 randomized L3 flow-groups (flow-group per direction, 10k \ +| ... | flows per flow-group) with all packets containing Ethernet header, \ +| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -65,9 +71,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot index 147578e4aa..f3203989ea 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot @@ -26,24 +26,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\ -| ... | 2x1M static IPv4 /32 route entries. DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and 2x1M static IPv4 /32 route entries. DUT1 is tested with \ +| ... | ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -64,9 +70,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-rnd-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-rnd-ndrpdr.robot index 91ed07a08d..ffab0d3f11 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-rnd-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-rnd-ndrpdr.robot @@ -27,25 +27,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\ -| ... | 2x1M static IPv4 /32 route entries. DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains 2 randomized L3 flow-groups (flow-group per direction, 1M\ -| ... | flows per flow-group) with all packets containing Ethernet header,\ -| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and 2x1M static IPv4 /32 route entries. DUT1 is tested with \ +| ... | ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains 2 randomized L3 flow-groups (flow-group per direction, 1M \ +| ... | flows per flow-group) with all packets containing Ethernet header, \ +| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -66,9 +71,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-cps-ndrpdr.robot index 0ee510870c..7631571404 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-cps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-cps-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *CPS on empty TCP transactions with IPv4 routing* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **CPS on empty TCP transactions with IPv4 routing** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets\ -| ... | containing Ethernet header, IPv4 header with TCP header and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets \ +| ... | containing Ethernet header, IPv4 header with TCP header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-pps-ndrpdr.robot index 813d029883..276e71df99 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-pps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-pps-ndrpdr.robot @@ -27,24 +27,30 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *PPS on lightweight TCP transactions with IPv4 routing* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **PPS on lightweight TCP transactions with IPv4 routing** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, TCP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, TCP header and static \ +| ... | payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -70,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h16384-p63-s1032192-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h16384-p63-s1032192-cps-ndrpdr.robot index 2935fe5380..13bf271534 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h16384-p63-s1032192-cps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h16384-p63-s1032192-cps-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *CPS on empty TCP transactions with IPv4 routing* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **CPS on empty TCP transactions with IPv4 routing** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets\ -| ... | containing Ethernet header, IPv4 header with TCP header and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets \ +| ... | containing Ethernet header, IPv4 header with TCP header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h16384-p63-s1032192-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h16384-p63-s1032192-pps-ndrpdr.robot index 0968ecd7b7..3765ee6cbe 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h16384-p63-s1032192-pps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h16384-p63-s1032192-pps-ndrpdr.robot @@ -27,24 +27,30 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *PPS on lightweight TCP transactions with IPv4 routing* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **PPS on lightweight TCP transactions with IPv4 routing** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, TCP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, TCP header and static \ +| ... | payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -70,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-cps-ndrpdr.robot index 86441217d5..c61412a9f0 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-cps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-cps-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *CPS on empty TCP transactions with IPv4 routing* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **CPS on empty TCP transactions with IPv4 routing** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets\ -| ... | containing Ethernet header, IPv4 header with TCP header and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets \ +| ... | containing Ethernet header, IPv4 header with TCP header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-pps-ndrpdr.robot index 320333d2ea..b126444065 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-pps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-pps-ndrpdr.robot @@ -27,24 +27,30 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *PPS on lightweight TCP transactions with IPv4 routing* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **PPS on lightweight TCP transactions with IPv4 routing** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, TCP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, TCP header and static \ +| ... | payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -70,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h4096-p63-s258048-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h4096-p63-s258048-cps-ndrpdr.robot index 518f3ceee1..92300bddfd 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h4096-p63-s258048-cps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h4096-p63-s258048-cps-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *CPS on empty TCP transactions with IPv4 routing* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **CPS on empty TCP transactions with IPv4 routing** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets\ -| ... | containing Ethernet header, IPv4 header with TCP header and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets \ +| ... | containing Ethernet header, IPv4 header with TCP header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h4096-p63-s258048-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h4096-p63-s258048-pps-ndrpdr.robot index 48f94987be..6b6cf171a2 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h4096-p63-s258048-pps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h4096-p63-s258048-pps-ndrpdr.robot @@ -27,24 +27,30 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *PPS on lightweight TCP transactions with IPv4 routing* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **PPS on lightweight TCP transactions with IPv4 routing** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, TCP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, TCP header and static \ +| ... | payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -70,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h65536-p63-s4128768-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h65536-p63-s4128768-cps-ndrpdr.robot index 1c0ba55efa..b9f4ff59c1 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h65536-p63-s4128768-cps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h65536-p63-s4128768-cps-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *CPS on empty TCP transactions with IPv4 routing* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **CPS on empty TCP transactions with IPv4 routing** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets\ -| ... | containing Ethernet header, IPv4 header with TCP header and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets \ +| ... | containing Ethernet header, IPv4 header with TCP header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h65536-p63-s4128768-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h65536-p63-s4128768-pps-ndrpdr.robot index 530292c9d9..8d2f9dec78 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h65536-p63-s4128768-pps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h65536-p63-s4128768-pps-ndrpdr.robot @@ -27,24 +27,30 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *PPS on lightweight TCP transactions with IPv4 routing* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **PPS on lightweight TCP transactions with IPv4 routing** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, TCP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, TCP header and static \ +| ... | payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -70,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-cps-ndrpdr.robot index ffae929b1d..824cc6f0f4 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-cps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-cps-ndrpdr.robot @@ -29,26 +29,31 @@ | | Test Template | Local Template | -| Documentation | *CPS on empty TCP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **CPS on empty TCP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and -| ... | one static IPv4 /18 route entries.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and one static IPv4 /18 route entries. \ | ... | DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets\ -| ... | containing Ethernet header, IPv4 header with TCP header and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets \ +| ... | containing Ethernet header, IPv4 header with TCP header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\ -| ... | for Network Security Device Performance\ +| ... | +| ... | - **[Ref] Applicable standard specifications:** Benchmarking \ +| ... | Methodology for Network Security Device Performance \ | ... | (draft-ietf-bmwg-ngfw-performance-03). *** Variables *** @@ -96,9 +101,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-pps-ndrpdr.robot index 76b8597ead..e2f1ab3eb1 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-pps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-pps-ndrpdr.robot @@ -27,24 +27,30 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *PPS on lightweight TCP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **PPS on lightweight TCP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, TCP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, TCP header and static \ +| ... | payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so @@ -89,9 +95,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\ +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-tput-ndrpdr.robot index 811ba0d6e2..964eac7611 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-tput-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-tput-ndrpdr.robot @@ -27,24 +27,30 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *TPUT on lightweight TCP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **TPUT on lightweight TCP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, TCP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, TCP header and static \ +| ... | payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so @@ -91,9 +97,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\ +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-cps-ndrpdr.robot index 60544c35a7..f85f6e1114 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-cps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-cps-ndrpdr.robot @@ -29,26 +29,31 @@ | | Test Template | Local Template | -| Documentation | *CPS on empty TCP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **CPS on empty TCP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\ -| ... | one static IPv4 /18 route entries.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and one static IPv4 /18 route entries. \ | ... | DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets\ -| ... | containing Ethernet header, IPv4 header with TCP header and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets \ +| ... | containing Ethernet header, IPv4 header with TCP header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\ -| ... | for Network Security Device Performance\ +| ... | +| ... | - **[Ref] Applicable standard specifications:** Benchmarking \ +| ... | Methodology for Network Security Device Performance \ | ... | (draft-ietf-bmwg-ngfw-performance-03). *** Variables *** @@ -96,9 +101,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-pps-ndrpdr.robot index 69a915f2e7..08cb4ed209 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-pps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-pps-ndrpdr.robot @@ -27,24 +27,30 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *PPS on lightweight TCP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **PPS on lightweight TCP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, TCP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, TCP header and static \ +| ... | payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so @@ -89,9 +95,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\ +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-tput-ndrpdr.robot index 1a044f91f8..edc2629706 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-tput-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-tput-ndrpdr.robot @@ -27,24 +27,30 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *TPUT on lightweight TCP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **TPUT on lightweight TCP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, TCP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, TCP header and static \ +| ... | payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so @@ -91,9 +97,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\ +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-cps-ndrpdr.robot index 32862ad7ea..5372b2e9ce 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-cps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-cps-ndrpdr.robot @@ -29,26 +29,31 @@ | | Test Template | Local Template | -| Documentation | *CPS on empty TCP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **CPS on empty TCP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\ -| ... | one static IPv4 /18 route entries.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and one static IPv4 /18 route entries. \ | ... | DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets\ -| ... | containing Ethernet header, IPv4 header with TCP header and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets \ +| ... | containing Ethernet header, IPv4 header with TCP header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\ -| ... | for Network Security Device Performance\ +| ... | +| ... | - **[Ref] Applicable standard specifications:** Benchmarking \ +| ... | Methodology for Network Security Device Performance \ | ... | (draft-ietf-bmwg-ngfw-performance-03). *** Variables *** @@ -98,9 +103,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-pps-ndrpdr.robot index 3970764877..7b7ebc8787 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-pps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-pps-ndrpdr.robot @@ -27,24 +27,30 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *PPS on lightweight TCP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **PPS on lightweight TCP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, TCP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, TCP header and static \ +| ... | payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so @@ -91,9 +97,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\ +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-tput-ndrpdr.robot index 4ff9adebad..8154b1d0a2 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-tput-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-tput-ndrpdr.robot @@ -27,24 +27,30 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *TPUT on lightweight TCP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **TPUT on lightweight TCP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, TCP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, TCP header and static \ +| ... | payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so @@ -93,9 +99,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\ +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-cps-ndrpdr.robot index 905ded6b9c..c3aa83e37e 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-cps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-cps-ndrpdr.robot @@ -29,26 +29,31 @@ | | Test Template | Local Template | -| Documentation | *CPS on empty TCP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **CPS on empty TCP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\ -| ... | one static IPv4 /18 route entries.\ -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets\ -| ... | containing Ethernet header, IPv4 header with TCP header and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and one static IPv4 /18 route entries. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets \ +| ... | containing Ethernet header, IPv4 header with TCP header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\ -| ... | for Network Security Device Performance\ +| ... | +| ... | - **[Ref] Applicable standard specifications:** Benchmarking \ +| ... | Methodology for Network Security Device Performance \ | ... | (draft-ietf-bmwg-ngfw-performance-03). *** Variables *** @@ -96,9 +101,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-pps-ndrpdr.robot index 954d6dbbc5..b9a4c49786 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-pps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-pps-ndrpdr.robot @@ -27,24 +27,30 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *PPS on lightweight TCP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **PPS on lightweight TCP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, TCP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, TCP header and static \ +| ... | payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so @@ -89,9 +95,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\ +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-tput-ndrpdr.robot index 6c7b82fb19..927ba9b8a8 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-tput-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-tput-ndrpdr.robot @@ -27,24 +27,30 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *TPUT on lightweight TCP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **TPUT on lightweight TCP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, TCP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, TCP header and static \ +| ... | payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so @@ -91,9 +97,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\ +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-cps-ndrpdr.robot index bd6cd1f7a0..5399ff7369 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-cps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-cps-ndrpdr.robot @@ -29,26 +29,31 @@ | | Test Template | Local Template | -| Documentation | *CPS on empty TCP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **CPS on empty TCP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\ -| ... | one static IPv4 /18 route entries.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and one static IPv4 /18 route entries. \ | ... | DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets\ -| ... | containing Ethernet header, IPv4 header with TCP header and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets \ +| ... | containing Ethernet header, IPv4 header with TCP header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\ -| ... | for Network Security Device Performance\ +| ... | +| ... | - **[Ref] Applicable standard specifications:** Benchmarking \ +| ... | Methodology for Network Security Device Performance \ | ... | (draft-ietf-bmwg-ngfw-performance-03). *** Variables *** @@ -98,9 +103,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-pps-ndrpdr.robot index b021cf8f37..691c320443 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-pps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-pps-ndrpdr.robot @@ -27,24 +27,30 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *PPS on lightweight TCP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **PPS on lightweight TCP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, TCP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, TCP header and static \ +| ... | payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so @@ -91,9 +97,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\ +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-tput-ndrpdr.robot index 6703fdfa80..7011470869 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-tput-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-tput-ndrpdr.robot @@ -27,24 +27,30 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *TPUT on lightweight TCP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **TPUT on lightweight TCP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, TCP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, TCP header and static \ +| ... | payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so @@ -93,9 +99,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\ +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-cps-ndrpdr.robot index 041cf5200f..1785cd0505 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-cps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-cps-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *CPS on empty UDP transactions with IPv4 routing* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **CPS on empty UDP transactions with IPv4 routing** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 -| ... | routing and two static IPv4 /22 route entries. DUT1 tested with -| ... | ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets\ -| ... | containing Ethernet header, IPv4 header with UDP header and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /22 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets \ +| ... | containing Ethernet header, IPv4 header with UDP header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -69,9 +74,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-pps-ndrpdr.robot index 7183c486e6..c72f66e9ad 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-pps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-pps-ndrpdr.robot @@ -27,24 +27,29 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *PPS on lightweight UDP transactions with IPv4 routing* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **PPS on lightweight UDP transactions with IPv4 routing** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /22 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, UDP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /22 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, UDP header and static \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -70,9 +75,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h16384-p63-s1032192-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h16384-p63-s1032192-cps-ndrpdr.robot index 35a047d49b..bf1c6d9c69 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h16384-p63-s1032192-cps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h16384-p63-s1032192-cps-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *CPS on empty UDP transactions with IPv4 routing* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **CPS on empty UDP transactions with IPv4 routing** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 -| ... | routing and two static IPv4 /18 route entries. DUT1 tested with -| ... | ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets\ -| ... | containing Ethernet header, IPv4 header with UDP header and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /18 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets \ +| ... | containing Ethernet header, IPv4 header with UDP header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -69,9 +74,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h16384-p63-s1032192-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h16384-p63-s1032192-pps-ndrpdr.robot index 3e02d65010..549120595f 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h16384-p63-s1032192-pps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h16384-p63-s1032192-pps-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *PPS on lightweight UDP transactions with IPv4 routing* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **PPS on lightweight UDP transactions with IPv4 routing** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 -| ... | routing and two static IPv4 /18 route entries. DUT1 tested with -| ... | ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /18 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -70,9 +75,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-cps-ndrpdr.robot index a6be499265..96baa98a8e 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-cps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-cps-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *CPS on empty UDP transactions with IPv4 routing* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **CPS on empty UDP transactions with IPv4 routing** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 -| ... | routing and two static IPv4 /14 route entries. DUT1 tested with -| ... | ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets\ -| ... | containing Ethernet header, IPv4 header with UDP header and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /14 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets \ +| ... | containing Ethernet header, IPv4 header with UDP header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -69,9 +74,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-pps-ndrpdr.robot index ac2063d308..63e19b3550 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-pps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-pps-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *PPS on lightweight UDP transactions with IPv4 routing* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **PPS on lightweight UDP transactions with IPv4 routing** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 -| ... | routing and two static IPv4 /14 route entries. DUT1 tested with -| ... | ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /14 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -70,9 +75,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h4096-p63-s258048-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h4096-p63-s258048-cps-ndrpdr.robot index a09262a48b..0e94b882f6 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h4096-p63-s258048-cps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h4096-p63-s258048-cps-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *CPS on empty UDP transactions with IPv4 routing* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **CPS on empty UDP transactions with IPv4 routing** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 -| ... | routing and two static IPv4 /20 route entries. DUT1 tested with -| ... | ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets\ -| ... | containing Ethernet header, IPv4 header with UDP header and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /20 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets \ +| ... | containing Ethernet header, IPv4 header with UDP header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -69,9 +74,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h4096-p63-s258048-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h4096-p63-s258048-pps-ndrpdr.robot index 61039c5640..8bb7dda830 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h4096-p63-s258048-pps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h4096-p63-s258048-pps-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *PPS on lightweight UDP transactions with IPv4 routing* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **PPS on lightweight UDP transactions with IPv4 routing** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 -| ... | routing and two static IPv4 /20 route entries. DUT1 tested with -| ... | ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /20 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -70,9 +75,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h65536-p63-s4128768-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h65536-p63-s4128768-cps-ndrpdr.robot index 2909203898..02190615c3 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h65536-p63-s4128768-cps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h65536-p63-s4128768-cps-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *CPS on empty UDP transactions with IPv4 routing* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **CPS on empty UDP transactions with IPv4 routing** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 -| ... | routing and two static IPv4 /16 route entries. DUT1 tested with -| ... | ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets\ -| ... | containing Ethernet header, IPv4 header with UDP header and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /16 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets \ +| ... | containing Ethernet header, IPv4 header with UDP header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -69,9 +74,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h65536-p63-s4128768-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h65536-p63-s4128768-pps-ndrpdr.robot index 8b52279044..e7135a7294 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h65536-p63-s4128768-pps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h65536-p63-s4128768-pps-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *PPS on lightweight UDP transactions with IPv4 routing* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **PPS on lightweight UDP transactions with IPv4 routing** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 -| ... | routing and two static IPv4 /16 route entries. DUT1 tested with -| ... | ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /16 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -70,9 +75,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot index 1e4ceb9d05..4ac0c394f7 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot @@ -27,25 +27,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot index 9f767f39a7..21681928ae 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot @@ -27,25 +27,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot index 426f1366cd..4f01fab94b 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot @@ -27,25 +27,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot index 55f69d0dd1..7a3060bcd0 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot @@ -27,25 +27,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot index 0e4ea8eba8..91a3ef584d 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot @@ -27,25 +27,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot index 3e03e63d40..2bf5f7d89c 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot @@ -27,25 +27,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ -| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static payload. MAC addresses are\ -| ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, \ +| ... | ${flows_per_dir} flows per flow-group) with all packets containing \ +| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +85,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1-p1-s1-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1-p1-s1-ndrpdr.robot index fdd8be37d1..a075aa062c 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1-p1-s1-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1-p1-s1-ndrpdr.robot @@ -29,26 +29,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput NAT44 deterministic mode performance -| ... | test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput NAT44 deterministic mode performance +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and -| ... | one static IPv4 /18 route entries. -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and one static IPv4 /18 route entries. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | det44_plugin.so @@ -92,9 +97,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1024-p63-s64512-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1024-p63-s64512-ndrpdr.robot index 6310ea94d8..8ceac800fa 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1024-p63-s64512-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1024-p63-s64512-ndrpdr.robot @@ -27,25 +27,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput NAT44 performance test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\ -| ... | two static IPv4 /22 and IPv4 /24 route entries.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and two static IPv4 /22 and IPv4 /24 route entries. \ | ... | DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with UDP header and static payload. MAC addresses are matching MAC\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with UDP header and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | det44_plugin.so @@ -89,9 +94,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h16384-p63-s1032192-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h16384-p63-s1032192-ndrpdr.robot index 65408c4326..c96dd4da01 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h16384-p63-s1032192-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h16384-p63-s1032192-ndrpdr.robot @@ -27,25 +27,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput NAT44 performance test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\ -| ... | two static IPv4 /18 and IPv4 /24 route entries.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and two static IPv4 /18 and IPv4 /24 route entries. \ | ... | DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with UDP header and static payload. MAC addresses are matching MAC\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with UDP header and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | det44_plugin.so @@ -89,9 +94,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h262144-p63-s16515072-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h262144-p63-s16515072-ndrpdr.robot index 928c53cc90..d9e0325375 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h262144-p63-s16515072-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h262144-p63-s16515072-ndrpdr.robot @@ -27,25 +27,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput NAT44 performance test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\ -| ... | two static IPv4 /14 and IPv4 /24 route entries.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and two static IPv4 /14 and IPv4 /24 route entries. \ | ... | DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with UDP header and static payload. MAC addresses are matching MAC\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with UDP header and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | det44_plugin.so @@ -91,9 +96,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h4096-p63-s258048-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h4096-p63-s258048-ndrpdr.robot index a3a405f1db..97307e82d0 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h4096-p63-s258048-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h4096-p63-s258048-ndrpdr.robot @@ -27,25 +27,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput NAT44 performance test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\ -| ... | two static IPv4 /20 and IPv4 /24 route entries.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and two static IPv4 /20 and IPv4 /24 route entries. \ | ... | DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with UDP header and static payload. MAC addresses are matching MAC\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with UDP header and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | det44_plugin.so @@ -89,9 +94,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h65536-p63-s4128758-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h65536-p63-s4128758-ndrpdr.robot index ee1ec3a8d0..1eaadfc992 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h65536-p63-s4128758-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h65536-p63-s4128758-ndrpdr.robot @@ -27,25 +27,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput NAT44 performance test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\ -| ... | two static IPv4 /16 and IPv4 /24 route entries.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and two static IPv4 /16 and IPv4 /24 route entries. \ | ... | DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with UDP header and static payload. MAC addresses are matching MAC\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with UDP header and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | det44_plugin.so @@ -91,9 +96,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-cps-ndrpdr.robot index 2048e5a4a5..bfcefa0f5d 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-cps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-cps-ndrpdr.robot @@ -29,26 +29,31 @@ | | Test Template | Local Template | -| Documentation | *CPS on empty UDP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **CPS on empty UDP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and -| ... | one static IPv4 /${dest_mask} route entries. -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets\ -| ... | containing Ethernet header, IPv4 header with UDP header and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and one static IPv4 /${dest_mask} route entries. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets \ +| ... | containing Ethernet header, IPv4 header with UDP header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\ -| ... | for Network Security Device Performance\ +| ... | +| ... | - **[Ref] Applicable standard specifications:** Benchmarking \ +| ... | Methodology for Network Security Device Performance \ | ... | (draft-ietf-bmwg-ngfw-performance-03). *** Variables *** @@ -94,9 +99,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-pps-ndrpdr.robot index f54c5f19bd..1efffef968 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-pps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-pps-ndrpdr.robot @@ -27,24 +27,29 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *PPS on lightweight UDP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **PPS on lightweight UDP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, UDP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, UDP header and static \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so @@ -89,9 +94,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\ +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-tput-ndrpdr.robot index 85f4f0d18f..39e5d2456a 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-tput-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-tput-ndrpdr.robot @@ -27,24 +27,29 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *TPUT on lightweight UDP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **TPUT on lightweight UDP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, UDP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, UDP header and static \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so @@ -91,9 +96,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\ +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-udir-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-udir-ndrpdr.robot index 73eb6b6a97..0535f00eab 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-udir-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-udir-ndrpdr.robot @@ -27,27 +27,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput NAT44 endpoint-dependent mode -| ... | performance test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput NAT44 endpoint-dependent mode +| ... | performance test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\ -| ... | one static IPv4 /${dest_mask} route entries.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and one static IPv4 /${dest_mask} route entries. \ | ... | DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contain L4 flows (uni-directional UDP flows) with all packets\ -| ... | containing Ethernet header, IPv4 header with UDP header and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contain L4 flows (uni-directional UDP flows) with all packets \ +| ... | containing Ethernet header, IPv4 header with UDP header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\ -| ... | for Network Security Device Performance\ +| ... | +| ... | - **[Ref] Applicable standard specifications:** Benchmarking \ +| ... | Methodology for Network Security Device Performance \ | ... | (draft-ietf-bmwg-ngfw-performance-03). *** Variables *** @@ -94,9 +99,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-cps-ndrpdr.robot index 8e43f22123..c58c73107f 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-cps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-cps-ndrpdr.robot @@ -29,26 +29,31 @@ | | Test Template | Local Template | -| Documentation | *CPS on empty UDP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **CPS on empty UDP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and -| ... | one static IPv4 /${dest_mask} route entries. -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets\ -| ... | containing Ethernet header, IPv4 header with UDP header and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and one static IPv4 /${dest_mask} route entries. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets \ +| ... | containing Ethernet header, IPv4 header with UDP header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\ -| ... | for Network Security Device Performance\ +| ... | +| ... | - **[Ref] Applicable standard specifications:** Benchmarking \ +| ... | Methodology for Network Security Device Performance \ | ... | (draft-ietf-bmwg-ngfw-performance-03). *** Variables *** @@ -94,9 +99,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-pps-ndrpdr.robot index 9313395f15..35852dc529 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-pps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-pps-ndrpdr.robot @@ -27,24 +27,29 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *PPS on lightweight UDP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **PPS on lightweight UDP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, UDP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, UDP header and static \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so @@ -89,9 +94,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\ +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-tput-ndrpdr.robot index e215e01a87..9aa2358a70 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-tput-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-tput-ndrpdr.robot @@ -27,24 +27,30 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *TPUT on lightweight UDP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **TPUT on lightweight UDP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, UDP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, UDP header and static \ +| ... | payload. \ \ \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so @@ -91,9 +97,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\ +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-udir-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-udir-ndrpdr.robot index 3fb7d3947d..ab474a01e0 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-udir-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-udir-ndrpdr.robot @@ -27,27 +27,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput NAT44 endpoint-dependent mode -| ... | performance test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput NAT44 endpoint-dependent mode +| ... | performance test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\ -| ... | one static IPv4 /${dest_mask} route entries.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and one static IPv4 /${dest_mask} route entries. \ | ... | DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contain L4 flows (un-directional UDP flows) with all packets\ -| ... | containing Ethernet header, IPv4 header with UDP header and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contain L4 flows (un-directional UDP flows) with all packets \ +| ... | containing Ethernet header, IPv4 header with UDP header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\ -| ... | for Network Security Device Performance\ +| ... | +| ... | - **[Ref] Applicable standard specifications:** Benchmarking \ +| ... | Methodology for Network Security Device Performance \ | ... | (draft-ietf-bmwg-ngfw-performance-03). *** Variables *** @@ -94,9 +99,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-cps-ndrpdr.robot index f8723642c7..f8e930ff31 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-cps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-cps-ndrpdr.robot @@ -29,26 +29,31 @@ | | Test Template | Local Template | -| Documentation | *CPS on empty UDP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **CPS on empty UDP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and -| ... | one static IPv4 /${dest_mask} route entries. -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets\ -| ... | containing Ethernet header, IPv4 header with UDP header and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and one static IPv4 /${dest_mask} route entries. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets \ +| ... | containing Ethernet header, IPv4 header with UDP header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\ -| ... | for Network Security Device Performance\ +| ... | +| ... | - **[Ref] Applicable standard specifications:** Benchmarking \ +| ... | Methodology for Network Security Device Performance \ | ... | (draft-ietf-bmwg-ngfw-performance-03). *** Variables *** @@ -96,9 +101,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-pps-ndrpdr.robot index 9aecd781b5..b2f95d7e2a 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-pps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-pps-ndrpdr.robot @@ -27,24 +27,29 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *PPS on lightweight UDP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **PPS on lightweight UDP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, UDP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, UDP header and static \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so @@ -91,9 +96,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\ +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-tput-ndrpdr.robot index 72fa285c35..b1dbdfa0ae 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-tput-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-tput-ndrpdr.robot @@ -27,24 +27,30 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *TPUT on lightweight UDP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **TPUT on lightweight UDP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, UDP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, UDP header and static \ +| ... | payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so @@ -94,9 +100,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\ +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-udir-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-udir-ndrpdr.robot index 6a3e8b4abe..77d52ab86f 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-udir-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-udir-ndrpdr.robot @@ -27,27 +27,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput NAT44 endpoint-dependent mode -| ... | performance test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput NAT44 endpoint-dependent mode +| ... | performance test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\ -| ... | one static IPv4 /${dest_mask} route entries.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and one static IPv4 /${dest_mask} route entries. \ | ... | DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contain L4 flows (uni-directional UDP flows) with all packets\ -| ... | containing Ethernet header, IPv4 header with UDP header and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contain L4 flows (uni-directional UDP flows) with all packets \ +| ... | containing Ethernet header, IPv4 header with UDP header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\ -| ... | for Network Security Device Performance\ +| ... | +| ... | - **[Ref] Applicable standard specifications:** Benchmarking \ +| ... | Methodology for Network Security Device Performance \ | ... | (draft-ietf-bmwg-ngfw-performance-03). *** Variables *** @@ -96,9 +101,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-cps-ndrpdr.robot index 1f920a987d..33c8ca99a5 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-cps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-cps-ndrpdr.robot @@ -29,26 +29,31 @@ | | Test Template | Local Template | -| Documentation | *CPS on empty UDP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **CPS on empty UDP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and -| ... | one static IPv4 /${dest_mask} route entries. -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets\ -| ... | containing Ethernet header, IPv4 header with UDP header and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and one static IPv4 /${dest_mask} route entries. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets \ +| ... | containing Ethernet header, IPv4 header with UDP header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\ -| ... | for Network Security Device Performance\ +| ... | +| ... | - **[Ref] Applicable standard specifications:** Benchmarking \ +| ... | Methodology for Network Security Device Performance \ | ... | (draft-ietf-bmwg-ngfw-performance-03). *** Variables *** @@ -94,9 +99,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-pps-ndrpdr.robot index 3125c5ca92..7d717937d6 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-pps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-pps-ndrpdr.robot @@ -27,24 +27,30 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *PPS on lightweight UDP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **PPS on lightweight UDP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, UDP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, UDP header and static \ +| ... | payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so @@ -89,9 +95,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\ +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-tput-ndrpdr.robot index 19414c94da..d76e7e5616 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-tput-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-tput-ndrpdr.robot @@ -27,24 +27,30 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *TPUT on lightweight UDP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **TPUT on lightweight UDP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, UDP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, UDP header and static \ +| ... | payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so @@ -91,9 +97,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\ +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-udir-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-udir-ndrpdr.robot index c391df4324..586188cc65 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-udir-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-udir-ndrpdr.robot @@ -27,27 +27,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput NAT44 endpoint-dependent mode -| ... | performance test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput NAT44 endpoint-dependent mode +| ... | performance test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\ -| ... | one static IPv4 /${dest_mask} route entries.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and one static IPv4 /${dest_mask} route entries. \ | ... | DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contain L4 flows (uni-directional UDP flows) with all packets\ -| ... | containing Ethernet header, IPv4 header with UDP header and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contain L4 flows (uni-directional UDP flows) with all packets \ +| ... | containing Ethernet header, IPv4 header with UDP header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\ -| ... | for Network Security Device Performance\ +| ... | +| ... | - **[Ref] Applicable standard specifications:** Benchmarking \ +| ... | Methodology for Network Security Device Performance \ | ... | (draft-ietf-bmwg-ngfw-performance-03). *** Variables *** @@ -94,9 +99,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-cps-ndrpdr.robot index 8c29bcff4b..e6a2a95ddc 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-cps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-cps-ndrpdr.robot @@ -29,26 +29,31 @@ | | Test Template | Local Template | -| Documentation | *CPS on empty UDP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **CPS on empty UDP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and -| ... | one static IPv4 /${dest_mask} route entries. -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets\ -| ... | containing Ethernet header, IPv4 header with UDP header and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and one static IPv4 /${dest_mask} route entries. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets \ +| ... | containing Ethernet header, IPv4 header with UDP header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\ -| ... | for Network Security Device Performance\ +| ... | +| ... | - **[Ref] Applicable standard specifications:** Benchmarking \ +| ... | Methodology for Network Security Device Performance \ | ... | (draft-ietf-bmwg-ngfw-performance-03). *** Variables *** @@ -96,9 +101,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-pps-ndrpdr.robot index 0fd0bec0fc..383c9eb488 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-pps-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-pps-ndrpdr.robot @@ -27,24 +27,29 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *PPS on lightweight UDP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **PPS on lightweight UDP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, UDP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, UDP header and static \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so @@ -91,9 +96,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\ +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-tput-ndrpdr.robot index f4c4430355..a743ad1844 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-tput-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-tput-ndrpdr.robot @@ -27,24 +27,29 @@ | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. -| Documentation | *TPUT on lightweight UDP transactions with NAT44ED* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **TPUT on lightweight UDP transactions with NAT44ED** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\ -| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains client and server ASTF programs, generating packets containing\ -| ... | Ethernet header, IPv4 header, UDP header and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ +| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains client and server ASTF programs, generating packets \ +| ... | containing Ethernet header, IPv4 header, UDP header and static \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so @@ -93,9 +98,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\ +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-udir-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-udir-ndrpdr.robot index 019ac77ef0..6776ad51ea 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-udir-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-udir-ndrpdr.robot @@ -27,27 +27,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput NAT44 endpoint-dependent mode -| ... | performance test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput NAT44 endpoint-dependent mode +| ... | performance test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\ -| ... | one static IPv4 /${dest_mask} route entries.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and one static IPv4 /${dest_mask} route entries. \ | ... | DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contain L4 flows (uni-directional UDP flows) with all packets\ -| ... | containing Ethernet header, IPv4 header with UDP header and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contain L4 flows (uni-directional UDP flows) with all packets \ +| ... | containing Ethernet header, IPv4 header with UDP header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\ -| ... | for Network Security Device Performance\ +| ... | +| ... | - **[Ref] Applicable standard specifications:** Benchmarking \ +| ... | Methodology for Network Security Device Performance \ | ... | (draft-ietf-bmwg-ngfw-performance-03). *** Variables *** @@ -96,9 +101,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration. +| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot index 1f650bc4df..34b6170257 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot @@ -27,27 +27,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4 -| ... | test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-Dot1Q-IPv4 for L2 switching of IPv4\ +| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q and \ +| ... | VXLANoIPv4 test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-Dot1Q-IPv4 for L2 switching of \ +| ... | IPv4. \ | ... | on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with 100 L2\ -| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and\ -| ... | DUT2. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k\ -| ... | flows per flow-group) with all packets containing Ethernet header, IEEE\ -| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload.\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with 100 \ +| ... | L2 \ +| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and \ +| ... | DUT2. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k \ +| ... | flows per flow-group) with all packets containing Ethernet header, \ +| ... | IEEE \ +| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -69,9 +77,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD forwarding config with VLAN and VXLAN and\ -| | ... | uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD forwarding config with VLAN and \ +| | ... | VXLAN and uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot index cf08ca9287..22021e1043 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4 -| ... | test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-Dot1Q-IPv4 for L2 switching of IPv4\ +| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q and \ +| ... | VXLANoIPv4 test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-Dot1Q-IPv4 for L2 switching of \ +| ... | IPv4. \ | ... | on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with 10 L2\ -| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and\ -| ... | DUT2. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k\ -| ... | flows per flow-group) with all packets containing Ethernet header, IEEE\ -| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload.\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with 10 L2 \ +| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and \ +| ... | DUT2. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k \ +| ... | flows per flow-group) with all packets containing Ethernet header, \ +| ... | IEEE \ +| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -69,9 +76,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD forwarding config with VLAN and VXLAN and\ -| | ... | uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD forwarding config with VLAN and \ +| | ... | VXLAN and uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot index 37de1ec357..07050239d7 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4 -| ... | test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-Dot1Q-IPv4 for L2 switching of IPv4\ +| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q and \ +| ... | VXLANoIPv4 test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-Dot1Q-IPv4 for L2 switching of \ +| ... | IPv4. \ | ... | on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with 1k L2\ -| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and\ -| ... | DUT2. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k\ -| ... | flows per flow-group) with all packets containing Ethernet header, IEEE\ -| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload.\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with 1k L2 \ +| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and \ +| ... | DUT2. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k \ +| ... | flows per flow-group) with all packets containing Ethernet header, \ +| ... | IEEE \ +| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -68,9 +75,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD forwarding config with VLAN and VXLAN and\ -| | ... | uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD forwarding config with VLAN and \ +| | ... | VXLAN and uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot index 47f9da84b5..ed036a3363 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4 -| ... | test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-Dot1Q-IPv4 for L2 switching of IPv4\ +| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q and \ +| ... | VXLANoIPv4 test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-Dot1Q-IPv4 for L2 switching of \ +| ... | IPv4. \ | ... | on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with 1 L2\ -| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and\ -| ... | DUT2. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k\ -| ... | flows per flow-group) with all packets containing Ethernet header, IEEE\ -| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload.\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with 1 L2 \ +| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and \ +| ... | DUT2. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k \ +| ... | flows per flow-group) with all packets containing Ethernet header, \ +| ... | IEEE \ +| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -68,9 +75,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD forwarding config with VLAN and VXLAN and\ -| | ... | uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD forwarding config with VLAN and \ +| | ... | VXLAN and uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4gtpusw-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4gtpusw-ip4base-ndrpdr.robot index 0c4d5b3f74..743a2ec8aa 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4gtpusw-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4gtpusw-ip4base-ndrpdr.robot @@ -27,25 +27,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput gtpu test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-GTPU on DUT1-DUT2,\ +| Documentation | **RFC2544: Pkt throughput gtpu test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-GTPU on DUT1-DUT2, \ | ... | Eth-IPv4 on TG-DUTn for IPv4 routing over GTPU tunnel. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and static routes. GTPU tunnel is configured between DUT1\ -| ... | and DUT2. DUT1 and DUT2 tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups with all packets containing Ethernet\ -| ... | header, IPv4 header with IP protocol=61 and static payload. MAC\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and static routes. GTPU tunnel is configured between DUT1 \ +| ... | and DUT2. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups with all packets containing Ethernet \ +| ... | header, IPv4 header with IP protocol=61 and static payload. MAC \ | ... | addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | gtpu_plugin.so @@ -65,9 +70,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs Gtpu hw offload routing config.\ +| | ... | - **[Cfg]** DUT runs Gtpu hw offload routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot index ba594f7aca..687e3e1ba7 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot @@ -30,26 +30,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput Lisp test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4 on DUT1-DUT2,\ +| Documentation | **RFC2544: Pkt throughput Lisp test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-LISP-IPv4 on DUT1-DUT2, \ | ... | Eth-IPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and static routes. LISPoIPv4 tunnel is configured between DUT1\ -| ... | and DUT2. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and static routes. LISPoIPv4 tunnel is configured between DUT1 \ +| ... | and DUT2. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ | ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC6830. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC6830. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so @@ -68,10 +73,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters\ -| | ... | config. +| | ... | - **[Cfg]** DUT runs IPv4 LISP remote static mappings and whitelist \ +| | ... | filters config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot index 32e270a13f..3b74615119 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot @@ -30,26 +30,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput Lisp test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv6 on DUT1-DUT2,\ +| Documentation | **RFC2544: Pkt throughput Lisp test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-LISP-IPv6 on DUT1-DUT2, \ | ... | Eth-IPv4 on TG-DUTn for IPv4 routing over LISPoIPv6 tunnel. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and static routes. LISPoIPv6 tunnel is configured between DUT1\ -| ... | and DUT2. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and static routes. LISPoIPv6 tunnel is configured between DUT1 \ +| ... | and DUT2. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ | ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC6830. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC6830. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so @@ -68,10 +73,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters\ -| | ... | config. +| | ... | - **[Cfg]** DUT runs IPv6 LISP remote static mappings and whitelist \ +| | ... | filters config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot index b1692c7877..3b2bd801a6 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot @@ -27,26 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD with VXLANoIPv4 test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4 on\ +| Documentation | **RFC2544: Pkt throughput L2BD with VXLANoIPv4 test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4 \ +| ... | on \ | ... | TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge\ -| ... | domain. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2.\ -| ... | DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 +| ... | bridge-\ +| ... | domain. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -65,9 +72,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD forwarding config with VXLAN and uses\ +| | ... | - **[Cfg]** Each DUT runs L2BD forwarding config with VXLAN and uses \ | | ... | ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot index f540c9c9e1..5a94a7b350 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot @@ -27,26 +27,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC with VXLANoIPv4 test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross-connect on TG-DUTn. -| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. VXLAN tunnels are configured between L2XCs on DUT1 and DUT2. -| ... | DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| Documentation | **RFC2544: Pkt throughput L2XC with VXLANoIPv4 test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross-connect on \ +| ... | TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between \ +| ... | DUT1 and DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | cross- connect. VXLAN tunnels are configured between L2XCs on DUT1 \ +| ... | and DUT2. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ | ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -65,9 +71,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config. +| | ... | - **[Cfg]** DUT runs L2XC forwarding config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1024tun-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1024tun-ip4base-ndrpdr.robot index e8c12d3e94..e102e84430 100644 --- a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1024tun-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1024tun-ip4base-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput GENEVE tunnel L3 mode performance -| ... | test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput GENEVE tunnel L3 mode performance \ +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\ -| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\ -| ... | routing over GENEVE tunnels. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\ -| ... | ${n_tunnels} GENEVE tunnels and ${${4} * ${n_tunnels}} static IPv4 /24\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \ +| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \ +| ... | for IPv4 routing over GENEVE tunnels. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | over ${n_tunnels} GENEVE tunnels and ${${4} ** ${n_tunnels}} static \ +| ... | IPv4 /24 \ | ... | route entries. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC791, RFC768, -| ... | RFC8926. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC791, \ +| ... | RFC768 and RFC8926. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so @@ -81,9 +87,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration. +| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-16tun-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-16tun-ip4base-ndrpdr.robot index 68ac42d623..e99117ba82 100644 --- a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-16tun-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-16tun-ip4base-ndrpdr.robot @@ -28,29 +28,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput GENEVE tunnel L3 mode performance -| ... | test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput GENEVE tunnel L3 mode performance \ +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\ -| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\ -| ... | routing over GENEVE tunnels. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\ -| ... | ${n_tunnels} GENEVE tunnels and ${${4} * ${n_tunnels}} static IPv4 /24\ -| ... | route entries. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \ +| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \ +| ... | for IPv4 routing over GENEVE tunnels. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | over ${n_tunnels} GENEVE tunnels and ${${4} ** ${n_tunnels}} static \ +| ... | IPv4 /24 route entries. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC791, RFC768, -| ... | RFC8926. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC791, \ +| ... | RFC768 and RFC8926. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so @@ -81,9 +86,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration. +| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-ndrpdr.robot index 291fb98659..f0624a207e 100644 --- a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-ndrpdr.robot @@ -28,29 +28,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput GENEVE tunnel L3 mode performance -| ... | test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput GENEVE tunnel L3 mode performance \ +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\ -| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\ -| ... | routing over GENEVE tunnel. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\ -| ... | GENEVE tunnel and 4 static IPv4 /24 route entries.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \ +| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \ +| ... | for IPv4 routing over GENEVE tunnel. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | over GENEVE tunnel and 4 static IPv4 /24 route entries. \ | ... | DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC791, RFC768, -| ... | RFC8926. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC791, \ +| ... | RFC768 and RFC8926. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so @@ -81,9 +86,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration. +| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-256tun-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-256tun-ip4base-ndrpdr.robot index 00b5db7b2e..aae9332a0f 100644 --- a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-256tun-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-256tun-ip4base-ndrpdr.robot @@ -28,29 +28,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput GENEVE tunnel L3 mode performance -| ... | test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput GENEVE tunnel L3 mode performance \ +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\ -| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\ -| ... | routing over GENEVE tunnels. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\ -| ... | ${n_tunnels} GENEVE tunnels and ${${4} * ${n_tunnels}} static IPv4 /24\ -| ... | route entries. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \ +| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \ +| ... | for IPv4 routing over GENEVE tunnels. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | over ${n_tunnels} GENEVE tunnels and ${${4} ** ${n_tunnels}} static \ +| ... | IPv4 /24 route entries. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC791, RFC768, -| ... | RFC8926. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC791, \ +| ... | RFC768 and RFC8926. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so @@ -81,9 +86,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration. +| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-4tun-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-4tun-ip4base-ndrpdr.robot index 63d70d72ec..4d9cd4fb92 100644 --- a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-4tun-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-4tun-ip4base-ndrpdr.robot @@ -28,29 +28,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput GENEVE tunnel L3 mode performance -| ... | test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput GENEVE tunnel L3 mode performance \ +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\ -| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\ -| ... | routing over GENEVE tunnels. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\ -| ... | ${n_tunnels} GENEVE tunnels and ${${4} * ${n_tunnels}} static IPv4 /24\ -| ... | route entries. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \ +| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \ +| ... | for IPv4 routing over GENEVE tunnels. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | over ${n_tunnels} GENEVE tunnels and ${${4} ** ${n_tunnels}} static \ +| ... | IPv4 /24 route entries. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC791, RFC768, -| ... | RFC8926. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC791, \ +| ... | RFC768 and RFC8926. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so @@ -81,9 +86,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration. +| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-64tun-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-64tun-ip4base-ndrpdr.robot index de057a28eb..d4ad8918a7 100644 --- a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-64tun-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-64tun-ip4base-ndrpdr.robot @@ -28,29 +28,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput GENEVE tunnel L3 mode performance -| ... | test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput GENEVE tunnel L3 mode performance \ +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\ -| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\ -| ... | routing over GENEVE tunnels. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\ -| ... | ${n_tunnels} GENEVE tunnels and ${${4} * ${n_tunnels}} static IPv4 /24\ -| ... | route entries. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \ +| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \ +| ... | for IPv4 routing over GENEVE tunnels. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | over ${n_tunnels} GENEVE tunnels and ${${4} ** ${n_tunnels}} static \ +| ... | IPv4 /24 route entries. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC791, RFC768, -| ... | RFC8926. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC791, \ +| ... | RFC768 and RFC8926. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so @@ -81,9 +86,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration. +| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot index b134dfde46..6014571243 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot @@ -26,28 +26,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv6 routing with IEEE 802.1Q test -| ... | cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. IEEE 802.1Q\ -| ... | tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and two static IPv6 /64 route entries. DUT1 and DUT2 are tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are\ -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\ -| ... | flow-groups (flow-group per direction, 253 flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv6 header with IP\ -| ... | protocol=61 and static payload. MAC addresses are matching MAC\ +| Documentation | **RFC2544: Pkt throughput IPv6 routing with IEEE 802.1Q \ +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing. \ +| ... | IEEE 802.1Q tagging is applied on link between DUT1 and DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \ +| ... | routing and two static IPv6 /64 route entries. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are \ +| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 \ +| ... | flow-groups (flow-group per direction, 253 flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv6 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs IPv6 routing with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs IPv6 routing with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot index 63dceac62e..d764614d5c 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot @@ -26,27 +26,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv6 allowlist test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6 -| ... | routing, two static IPv6 /64 routes and IPv6 ADL security allowlist -| ... | ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG. -| ... | DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv6 header and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node +| Documentation | **RFC2544: Pkt throughput IPv6 allowlist test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \ +| ... | routing, two static IPv6 /64 routes and IPv6 ADL security allowlist \ +| ... | ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG. \ +| ... | DUT1 and DUT2 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 253 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv6 header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | adl_plugin.so @@ -65,9 +70,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and allowlist filters config with +| | ... | - **[Cfg]** DUT runs IPv6 routing and allowlist filters config with \ | | ... | ${phy_cores} phy core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot index 80eb55f1d0..598c2657fe 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot @@ -26,26 +26,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv6 iAcl whitelist test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6 -| ... | routing, two static IPv6 /64 routes and IPv6 iAcl security whitelist -| ... | ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG. -| ... | DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv6 header and generated payload. MAC +| Documentation | **RFC2544: Pkt throughput IPv6 iAcl whitelist test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \ +| ... | routing, two static IPv6 /64 routes and IPv6 iAcl security whitelist \ +| ... | ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG. \ +| ... | DUT1 and DUT2 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 253 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv6 header and generated payload. MAC \ | ... | addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -64,9 +69,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with +| | ... | - **[Cfg]** DUT runs IPv6 routing and whitelist filters config with \ | | ... | ${phy_cores} phy core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-ndrpdr.robot index 8de0d66e7c..41e90183fa 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-ndrpdr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and two static IPv6 /64 route entries. DUT1 and DUT2\ +| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \ +| ... | routing and two static IPv6 /64 route entries. DUT1 and DUT2 \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv6 header and -| ... | static payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG. \ +| ... | on links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 253 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv6 header and static payload. MAC \ +| ... | addresses are matching MAC addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -63,9 +68,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | - **[Cfg]** DUT runs IPv6 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot index ee94abf629..42d79e471f 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot @@ -26,26 +26,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and 2x100k static IPv6 /64 route entries. DUT1 and DUT2 tested\ +| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \ +| ... | routing and 2x100k static IPv6 /64 route entries. DUT1 and DUT2 tested \ | ... | with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ -| ... | with IP and static payload. MAC addresses are matching MAC addresses\ -| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header \ +| ... | with IP and static payload. MAC addresses are matching MAC addresses \ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination \ | ... | address) field is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -65,9 +70,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | - **[Cfg]** DUT runs IPv6 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-rnd-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-rnd-ndrpdr.robot index 244a68b6af..dfd56440cb 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-rnd-ndrpdr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-rnd-ndrpdr.robot @@ -26,26 +26,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and 2x100k static IPv6 /64 route entries. DUT1 and DUT2 tested\ +| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \ +| ... | routing and 2x100k static IPv6 /64 route entries. DUT1 and DUT2 tested \ | ... | with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ -| ... | with IP and static payload. MAC addresses are matching MAC addresses\ -| ... | of the TG node interfaces. Randomization of IP.dst (IPv6 destination\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header \ +| ... | with IP and static payload. MAC addresses are matching MAC addresses \ +| ... | of the TG node interfaces. Randomization of IP.dst (IPv6 destination \ | ... | address) field is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -65,9 +70,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | - **[Cfg]** DUT runs IPv6 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot index 0892386b39..33a1a7b299 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot @@ -26,26 +26,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and 2x10k static IPv6 /64 route entries. DUT1 and DUT2 tested\ +| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \ +| ... | routing and 2x10k static IPv6 /64 route entries. DUT1 and DUT2 tested \ | ... | with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ -| ... | with IP and static payload. MAC addresses are matching MAC addresses\ -| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header \ +| ... | with IP and static payload. MAC addresses are matching MAC addresses \ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination \ | ... | address) field is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -65,9 +70,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | - **[Cfg]** DUT runs IPv6 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-rnd-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-rnd-ndrpdr.robot index b77f6faf0d..83dae86089 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-rnd-ndrpdr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-rnd-ndrpdr.robot @@ -26,26 +26,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and 2x10k static IPv6 /64 route entries. DUT1 and DUT2 tested\ +| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \ +| ... | routing and 2x10k static IPv6 /64 route entries. DUT1 and DUT2 tested \ | ... | with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ -| ... | with IP and static payload. MAC addresses are matching MAC addresses\ -| ... | of the TG node interfaces. Randomization of IP.dst (IPv6 destination\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header \ +| ... | with IP and static payload. MAC addresses are matching MAC addresses \ +| ... | of the TG node interfaces. Randomization of IP.dst (IPv6 destination \ | ... | address) field is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -65,9 +70,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | - **[Cfg]** DUT runs IPv6 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot index d470a2618d..60ad9678de 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot @@ -26,26 +26,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and 2x1M static IPv6 /64 route entries. DUT1 and DUT2 tested\ +| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \ +| ... | routing and 2x1M static IPv6 /64 route entries. DUT1 and DUT2 tested \ | ... | with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ -| ... | with IP and static payload. MAC addresses are matching MAC addresses\ -| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header \ +| ... | with IP and static payload. MAC addresses are matching MAC addresses \ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination \ | ... | address) field is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -65,9 +70,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv6 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-rnd-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-rnd-ndrpdr.robot index 5691c8fe5c..e75a766091 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-rnd-ndrpdr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-rnd-ndrpdr.robot @@ -26,26 +26,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and 2x1M static IPv6 /64 route entries. DUT1 and DUT2 tested\ +| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \ +| ... | routing and 2x1M static IPv6 /64 route entries. DUT1 and DUT2 tested \ | ... | with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ -| ... | with IP and static payload. MAC addresses are matching MAC addresses\ -| ... | of the TG node interfaces. Randomization of IP.dst (IPv6 destination\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header \ +| ... | with IP and static payload. MAC addresses are matching MAC addresses \ +| ... | of the TG node interfaces. Randomization of IP.dst (IPv6 destination \ | ... | address) field is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -65,9 +70,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv6 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-dot1q-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-dot1q-ip6base-ndrpdr.robot index e42b76d69e..dcafad5897 100644 --- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-dot1q-ip6base-ndrpdr.robot +++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-dot1q-ip6base-ndrpdr.robot @@ -26,27 +26,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv6 routing with IEEE 802.1Q test -| ... | cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. IEEE 802.1Q\ -| ... | tagging is applied on link between DUT1-if2 and TG-if2. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\ -| ... | two static IPv6 /64 route entries. DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are\ -| ... | generated by TG on links to DUT1. TG traffic profile contains two L3\ -| ... | flow-groups (flow-group per direction, 253 flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv6 header with IP\ -| ... | protocol=61 and static payload. MAC addresses are matching MAC\ +| Documentation | **RFC2544: Pkt throughput IPv6 routing with IEEE 802.1Q test \ +| ... | cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing. \ +| ... | IEEE 802.1Q tagging is applied on link between DUT1-if2 and TG-if2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \ +| ... | two static IPv6 /64 route entries. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are \ +| ... | generated by TG on links to DUT1. TG traffic profile contains two L3 \ +| ... | flow-groups (flow-group per direction, 253 flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv6 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -70,9 +75,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs IPv6 routing with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs IPv6 routing with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot index 34bb6cd9c1..ab6a3b089d 100644 --- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot +++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot @@ -26,27 +26,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv6 allowlist test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv6 allowlist test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 -| ... | routing, two static IPv6 /64 routes and IPv6 ADL security allowlist -| ... | ingress /64 filter entries applied on links TG - DUT1. -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 \ +| ... | routing, two static IPv6 /64 routes and IPv6 ADL security allowlist \ +| ... | ingress /64 filter entries applied on links TG - DUT1. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. | ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv6 header and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 253 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv6 header and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | adl_plugin.so @@ -65,9 +70,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and allowlist filters config with +| | ... | - **[Cfg]** DUT runs IPv6 routing and allowlist filters config with \ | | ... | ${phy_cores} phy core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot index 141caebf58..180a42fc56 100644 --- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot +++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot @@ -26,26 +26,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv6 iAcl whitelist test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv6 iAcl whitelist test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 -| ... | routing, two static IPv6 /64 routes and IPv6 iAcl security whitelist -| ... | ingress /64 filter entries applied on links TG - DUT1. -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv6 header and generated payload. MAC +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 \ +| ... | routing, two static IPv6 /64 routes and IPv6 iAcl security whitelist \ +| ... | ingress /64 filter entries applied on links TG - DUT1. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 253 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv6 header and generated payload. MAC \ | ... | addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -64,9 +69,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with +| | ... | - **[Cfg]** DUT runs IPv6 routing and whitelist filters config with \ | | ... | ${phy_cores} phy core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot index 9d622d3d12..64a2e289eb 100644 --- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot +++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot @@ -26,24 +26,29 @@ | | Test Template | Local Template | -| Documentation | *Packet throughput IPv6 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **Packet throughput IPv6 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and two\ -| ... | static IPv6 /64 route entries. DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \ +| ... | and two static IPv6 /64 route entries. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -62,9 +67,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv6 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot index 207af58dc5..82213a23b2 100644 --- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot +++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\ +| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \ | ... | 2x100k static IPv6 /64 route entries. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ -| ... | with IP and static payload. MAC addresses are matching MAC addresses\ -| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header \ +| ... | with IP and static payload. MAC addresses are matching MAC addresses \ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination \ | ... | address) field is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -64,9 +69,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | - **[Cfg]** DUT runs IPv6 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-rnd-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-rnd-ndrpdr.robot index 43bab0f001..fc5253ef50 100644 --- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-rnd-ndrpdr.robot +++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-rnd-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\ +| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \ | ... | 2x100k static IPv6 /64 route entries. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ -| ... | with IP and static payload. MAC addresses are matching MAC addresses\ -| ... | of the TG node interfaces. Randomization of IP.dst (IPv6 destination\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header \ +| ... | with IP and static payload. MAC addresses are matching MAC addresses \ +| ... | of the TG node interfaces. Randomization of IP.dst (IPv6 destination \ | ... | address) field is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -64,9 +69,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | - **[Cfg]** DUT runs IPv6 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot index 5d7d976542..66f7d5349d 100644 --- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot +++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\ +| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \ | ... | 2x10k static IPv6 /64 route entries. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ -| ... | with IP and static payload. MAC addresses are matching MAC addresses\ -| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header \ +| ... | with IP and static payload. MAC addresses are matching MAC addresses \ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination \ | ... | address) field is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -64,9 +69,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | - **[Cfg]** DUT runs IPv6 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-rnd-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-rnd-ndrpdr.robot index ce55cf5581..b4aefe38ef 100644 --- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-rnd-ndrpdr.robot +++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-rnd-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\ +| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \ | ... | 2x10k static IPv6 /64 route entries. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ -| ... | with IP and static payload. MAC addresses are matching MAC addresses\ -| ... | of the TG node interfaces. Randomization of IP.dst (IPv6 destination\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header \ +| ... | with IP and static payload. MAC addresses are matching MAC addresses \ +| ... | of the TG node interfaces. Randomization of IP.dst (IPv6 destination \ | ... | address) field is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -64,9 +69,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | - **[Cfg]** DUT runs IPv6 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot index 8acb3068de..887f10334c 100644 --- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot +++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\ +| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \ | ... | 2x1M static IPv6 /64 route entries. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ -| ... | with IP and static payload. MAC addresses are matching MAC addresses\ -| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header \ +| ... | with IP and static payload. MAC addresses are matching MAC addresses \ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination \ | ... | address) field is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -64,9 +69,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv6 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-rnd-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-rnd-ndrpdr.robot index 2878fff3e5..879c3ce5c7 100644 --- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-rnd-ndrpdr.robot +++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-rnd-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\ +| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \ | ... | 2x1M static IPv6 /64 route entries. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ -| ... | with IP and static payload. MAC addresses are matching MAC addresses\ -| ... | of the TG node interfaces. Randomization of IP.dst (IPv6 destination\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header \ +| ... | with IP and static payload. MAC addresses are matching MAC addresses \ +| ... | of the TG node interfaces. Randomization of IP.dst (IPv6 destination \ | ... | address) field is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -64,9 +69,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config.\ +| | ... | - **[Cfg]** DUT runs IPv6 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip4-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip4-ip6base-ndrpdr.robot index aad9d1f8f8..1284d541a9 100644 --- a/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip4-ip6base-ndrpdr.robot +++ b/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip4-ip6base-ndrpdr.robot @@ -30,21 +30,26 @@ | | Test Template | Local Template | -| Documentation | *RFC6830: Pkt throughput Lisp test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes.\ -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv4 on DUT1-DUT2,\ -| ... | Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.\ -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and static routes. LISPoIPv4 tunnel is configured between\ -| ... | DUT1 and DUT2. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | *[Ref] Applicable standard specifications:* RFC6830. +| Documentation | **RFC6830: Pkt throughput Lisp test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. \ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6-LISP-IPv4 on DUT1-DUT2, \ +| ... | Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel. \ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \ +| ... | routing and static routes. LISPoIPv4 tunnel is configured between \ +| ... | DUT1 and DUT2. DUT1 and DUT2 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC6830. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so @@ -63,10 +68,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\ -| | ... | filters config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.\ -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPv6 LISP remote static mappings and whitelist \ +| | ... | filters config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Frame size in Bytes as integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip6-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip6-ip6base-ndrpdr.robot index df45bffc43..47fd4a8d50 100644 --- a/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip6-ip6base-ndrpdr.robot +++ b/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip6-ip6base-ndrpdr.robot @@ -30,21 +30,26 @@ | | Test Template | Local Template | -| Documentation | *RFC6830: Pkt throughput Lisp test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes.\ -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv6 on DUT1-DUT2,\ -| ... | Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.\ -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and static routes. LISPoIPv6 tunnel is configured between\ -| ... | DUT1 and DUT2. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | *[Ref] Applicable standard specifications:* RFC6830. +| Documentation | **RFC6830: Pkt throughput Lisp test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. \ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6-LISP-IPv6 on DUT1-DUT2, \ +| ... | Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel. \ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \ +| ... | routing and static routes. LISPoIPv6 tunnel is configured between \ +| ... | DUT1 and DUT2. DUT1 and DUT2 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC6830. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so @@ -63,10 +68,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\ -| | ... | filters config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.\ -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPv6 LISP remote static mappings and whitelist \ +| | ... | filters config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Frame size in Bytes as integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot index 5db54b65b7..6aecbb1e80 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot @@ -27,27 +27,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC with 802.1ad test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 xconnect. -| ... | 802.1ad tagging is applied on link between DUT1 and DUT2 with inner 4B +| Documentation | **RFC2544: Pkt throughput L2XC with 802.1ad test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 xconnect. \ +| ... | 802.1ad tagging is applied on link between DUT1 and DUT2 with inner 4B \ | ... | vlan tag (id=100) and outer 4B vlan tag (id=200). -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | cross-connect. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 253 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG. \ | ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config. +| | ... | - **[Cfg]** DUT runs L2XC forwarding config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot index 780c82d273..cbde673ec1 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot @@ -26,27 +26,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. IEEE\ -| ... | 802.1Q tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge\ -| ... | domain and MAC learning enabled. DUT1 and DUT2 are tested\ +| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ +| ... | IEEE 802.1Q tagging is applied on link between DUT1 and DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | bridge-\ +| ... | domain and MAC learning enabled. DUT1 and DUT2 are tested \ | ... | with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are\ -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\ -| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are \ +| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 \ +| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -70,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD config with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD config with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot index 9c2f0b08af..ac8ea43997 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC with IEEE 802.1Q test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. IEEE\ +| Documentation | **RFC2544: Pkt throughput L2XC with IEEE 802.1Q test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. IEEE \ | ... | 802.1Q tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-\ -| ... | connect. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are\ -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\ -| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | cross-connect. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are \ +| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 \ +| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -67,9 +72,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2XC config with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2XC config with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot index 8c70fc1e1d..e80d3cdc78 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot index 93dcad3af5..a259c75522 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot index 108516303f..3ef84a7063 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot index 737f76ba6f..95c00c5acc 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot index 817b55e750..f8f6dfbb27 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot index 5be6f99956..2d30830a10 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot index 2be2a617d5..557821d924 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot index 8faeaa292a..3b6f09a76d 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot index a045ff276b..675cbf134d 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2BD config with ACLs with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot index 9a426c3662..6a1c65f7bb 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot index 003290e31b..5fb3469dc7 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot index a2dc8cdef6..c2dae43adf 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2BD config with ACLs with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot index 60977d8a04..01978a1b41 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot index 90c3de6df5..b7c1939df6 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot index 067bfe6e1c..cfaa0063f7 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2BD config with ACLs with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot index 63b3ffb132..bd81d25007 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching \ +| ... | of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot index 30f536d576..28de9e4354 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot index 3882157f02..64ae6b1df4 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2BD config with ACLs with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot index 64fc2e38ed..8f9c364698 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot @@ -27,28 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by\ -| ... | Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required MACIP ACL rules are applied to input paths of both DUT1 \ +| ... | addresses of the TG node interfaces. DUT1 and DUT2 are tested with \ +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -82,9 +88,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot index 837d8038c7..6830f3556f 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot @@ -27,28 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by\ -| ... | Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required MACIP ACL rules are applied to input paths of both DUT1 \ +| ... | addresses of the TG node interfaces. DUT1 and DUT2 are tested with \ +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -82,9 +88,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot index 02e04333cb..4ebe9e4a15 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot @@ -27,28 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by\ -| ... | Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required MACIP ACL rules are applied to input paths of both DUT1 \ +| ... | addresses of the TG node interfaces. DUT1 and DUT2 are tested with \ +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -82,9 +88,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot index f840b2fe76..8a951d1a9a 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot @@ -27,27 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. Required MACIP ACL rules are applied to input paths of both \ +| ... | DUT1 addresses of the TG node interfaces. DUT1 and DUT2 are tested \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot index 759064db91..35058db983 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot @@ -27,27 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. Required MACIP ACL rules are applied to input paths of both \ +| ... | DUT1 addresses of the TG node interfaces. DUT1 and DUT2 are tested \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot index 5ff1238aef..b167cd8684 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot @@ -27,27 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. Required MACIP ACL rules are applied to input paths of both \ +| ... | DUT1 addresses of the TG node interfaces. DUT1 and DUT2 are tested \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot index 0b7d0280f7..a6e7aa7454 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot @@ -27,27 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. Required MACIP ACL rules are applied to input paths of both \ +| ... | DUT1 addresses of the TG node interfaces. DUT1 and DUT2 are tested \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot index 42e18e03a0..04ffc75b77 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot @@ -27,27 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. Required MACIP ACL rules are applied to input paths of both \ +| ... | DUT1 addresses of the TG node interfaces. DUT1 and DUT2 are tested \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot index 98305442bc..0c64674e32 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot @@ -27,27 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. Required MACIP ACL rules are applied to input paths of both \ +| ... | DUT1 addresses of the TG node interfaces. DUT1 and DUT2 are tested \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot index 9fec554309..a425bb61cb 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot @@ -26,24 +26,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\ -| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ +| Documentation | **RFC2544: Pkt throughput L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | bridge-domain and MAC learning enabled. DUT1 and DUT2 are tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -62,9 +68,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD switching config and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD switching config and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot index 8d7b823d22..fce37e5a59 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot index cbacd52de4..fe9434ece8 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot index da5710eaa1..108e375a0c 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot index 5f6d151fb1..7f9c73d38c 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot index 1d0b5f03ae..406377f139 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot index 7991be1484..8c576f25b9 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot index 72705d52d3..5adca7053c 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot index 2fa9c79b92..d7b05da216 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching \ +| ... | of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] | FIXME. -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot index d3af3ae831..e0d2886966 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot index 9ee7169039..beb82978d8 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot index aade203d13..a4d169ab56 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 \ +| ... | intefaces. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot index e68ed5ff26..aedb96a8b2 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot index a4cf1811b0..72a7b16df0 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot index 07112f7547..bd7c6e36cc 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot index 6083b3556d..71a21d17dd 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot index b269236abc..b577a8acec 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot index 10cebc86fb..045b1b39b6 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot index 8563a436c7..fe88c5f4ce 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot index ba8bc25639..e43e6892f1 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot @@ -27,28 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput for L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\ -| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 50k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload.\ +| Documentation | **RFC2544: Pkt throughput for L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | bridge-domain and MAC learning enabled. DUT1 and DUT2 are tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 50k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. \ | ... | MAC addresses ranges are incremented as follows: | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -67,9 +73,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [CFG] Each DUT runs L2BD switching config and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD switching config and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot index a3dbe03979..d7df02a0fa 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot @@ -27,28 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput for L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\ -| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 5k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload.\ +| Documentation | **RFC2544: Pkt throughput for L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | bridge-domain and MAC learning enabled. DUT1 and DUT2 are tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 5k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. \ | ... | MAC addresses ranges are incremented as follows: | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -67,9 +73,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [CFG] Each DUT runs L2BD switching config and uses ${phy_cores}\ +| | ... | [CFG] Each DUT runs L2BD switching config and uses ${phy_cores} \ | | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot index 875c15ed7c..25af80e97d 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot @@ -27,28 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput for L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\ -| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 500k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload.\ +| Documentation | **RFC2544: Pkt throughput for L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | bridge-\ +| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 500k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. \ | ... | MAC addresses ranges are incremented as follows: | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -67,9 +73,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD switching config and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD switching config and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot index 93a8158e03..8d42937058 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot @@ -26,24 +26,29 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2patch test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 patch. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 patch\ -| ... | DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header,IPv4 header with static payload.\ +| Documentation | **RFC2544: Pkt throughput L2patch test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 patch. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | patch DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all \ +| ... | packets containing Ethernet header, IPv4 header with static payload \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -62,9 +67,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2 patch config with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2 patch config with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot index 0e2047cf2a..b67ad4ea4a 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot @@ -26,24 +26,29 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2XC test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | cross-connect. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -62,9 +67,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2XC config with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot index c69dcfe59e..468f4eed29 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot @@ -26,28 +26,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4 for L2 switching of IPv4.\ -| ... | IEEE 802.1Q tagging is applied on both links TG-DUT1 . -| ... | *[Cfg] DUT configuration:* DUT1 is configured with:\ -| ... | 2 VLAN subinterfaces (VID 100 and 200),\ -| ... | 1 L2 BD with the 2 VLAN subinterfaces,\ -| ... | DUT1 tested with ${nic_name} with VF enabled. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are\ -| ... | generated by TG on links to DUT1. TG traffic profile contains two L3\ -| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4 for L2 switching \ +| ... | of IPv4. IEEE 802.1Q tagging is applied on both links TG-DUT1. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with: \ +| ... | 2 VLAN subinterfaces (VID 100 and 200), \ +| ... | 1 L2 BD with the 2 VLAN subinterfaces. \ +| ... | DUT1 is tested with ${nic_name} with VF enabled. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are \ +| ... | generated by TG on links to DUT1. TG traffic profile contains two L3 \ +| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -66,9 +71,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD with VLAN with ${phy_cores} physical core(s) for\ -| | ... | worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs L2BD with VLAN with ${phy_cores} physical \ +| | ... | core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot index 98552f3de9..7456c0b799 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC with IEEE 802.1Q test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. IEEE\ +| Documentation | **RFC2544: Pkt throughput L2XC with IEEE 802.1Q test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. IEEE \ | ... | 802.1Q tagging is applied on link between DUT1-if2 and TG-if2. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross- connect.\ -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are\ -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\ -| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 cross-\ +| ... | connect. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are \ +| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 \ +| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -65,9 +70,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2XC config with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2XC config with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot index e54e11c473..780903e995 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot @@ -27,27 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 1-node circular topology +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 1-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +86,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2BD config with ACLs with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot index 4be7be3f32..a22e4e8494 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot @@ -27,27 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +86,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2BD config with ACLs with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot index 085b9de957..14fa1214f2 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot @@ -27,27 +27,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. \ +| ... | Required MACIP ACL rules are applied to input paths of both DUT1 \ +| ... | addresses of the TG node interfaces. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -81,9 +86,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot index 7636dd626e..d300bc4487 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot @@ -26,24 +26,29 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\ -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \ +| ... | and MAC learning enabled. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -62,9 +67,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config and uses ${phy_cores} physical\ -| | ... | core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs L2BD switching config and uses ${phy_cores} \ +| | ... | physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot index f1bd1b28ba..f6fc83ed21 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot @@ -27,27 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +86,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot index a7a5327d97..33a82e92ba 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot @@ -27,27 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +86,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot index 5bc5a04487..6b12fc1a17 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot @@ -27,28 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput for L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput for L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\ -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 50k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \ +| ... | and MAC learning enabled. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 50k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. \ | ... | MAC addresses ranges are incremented as follows: | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -67,9 +72,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config and uses ${phy_cores} physical\ -| | ... | core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs L2BD switching config and uses ${phy_cores} \ +| | ... | physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot index 591933baf4..8d19ecde87 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot @@ -27,28 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput for L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput for L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\ -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 5k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \ +| ... | and MAC learning enabled. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 5k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. \ | ... | MAC addresses ranges are incremented as follows: | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -67,9 +72,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config and uses ${phy_cores} physical\ -| | ... | core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs L2BD switching config and uses ${phy_cores} \ +| | ... | physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot index 0c9d2a03ff..c8ed6a8cce 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot @@ -27,28 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput for L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput for L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\ -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 500k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \ +| ... | and MAC learning enabled. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 500k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. \ | ... | MAC addresses ranges are incremented as follows: | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -67,9 +72,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config and uses ${phy_cores} physical\ -| | ... | core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs L2BD switching config and uses ${phy_cores} \ +| | ... | physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot index 35f94c8893..356eff5d15 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot @@ -26,24 +26,29 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2patch test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput L2patch test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 patch. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 patch\ -| ... | DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header,IPv4 header with static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 patch. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 patch \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all \ +| ... | packets containing Ethernet header, IPv4 header with static payload \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -62,9 +67,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2 patch config with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2 patch config with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot index 8c55c56d1b..aa9e0458ee 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot @@ -26,24 +26,29 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput L2XC test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect. -| ... | DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header,IPv4 header with static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all \ +| ... | packets containing Ethernet header, IPv4 header with static payload \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -62,9 +67,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC config.\ +| | ... | - **[Cfg]** DUT runs L2XC config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-l3dsr-ndrpdr.robot b/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-l3dsr-ndrpdr.robot index 25dec68045..ebda8a2ea6 100644 --- a/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-l3dsr-ndrpdr.robot +++ b/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-l3dsr-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput loadbalancer l3dsr test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput loadbalancer l3dsr test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for LoadBalancer l3dsr. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with LoadBalancer\ -| ... | l3dsr and one static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT. TG traffic profile\ -| ... | contains two L4 flow-groups (l3dsr use flow-group is only from TG\ -| ... | to DUT, 6 flows for flow-group) with all packets containing Ethernet\ -| ... | header, IPv4 header with IP protocol=17 and static payload. MAC\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for LoadBalancer l3dsr. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with LoadBalancer \ +| ... | l3dsr and one static IPv4 /24 route entries. DUT1 tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT. TG traffic profile \ +| ... | contains two L4 flow-groups (l3dsr use flow-group is only from TG \ +| ... | to DUT, 6 flows for flow-group) with all packets containing Ethernet \ +| ... | header, IPv4 header with IP protocol=17 and static payload. MAC \ | ... | addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lb_plugin.so @@ -64,9 +69,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs LoadBalancer l3dsr config.\ +| | ... | - **[Cfg]** DUT runs LoadBalancer l3dsr config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-maglev-ndrpdr.robot b/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-maglev-ndrpdr.robot index 2c58df9f44..3edefd9891 100644 --- a/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-maglev-ndrpdr.robot +++ b/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-maglev-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput loadbalancer maglev test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput loadbalancer maglev test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for LoadBalancer maglev. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with LoadBalancer\ -| ... | maglev and one static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT. TG traffic profile\ -| ... | contains two L4 flow-groups (maglev use flow-group is only from TG\ -| ... | to DUT, 6 flows for flow-group) with all packets containing Ethernet\ -| ... | header, IPv4 header with IP protocol=17 and static payload. MAC\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for LoadBalancer maglev. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with LoadBalancer \ +| ... | maglev and one static IPv4 /24 route entries. DUT1 tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT. TG traffic profile \ +| ... | contains two L4 flow-groups (maglev use flow-group is only from TG \ +| ... | to DUT, 6 flows for flow-group) with all packets containing Ethernet \ +| ... | header, IPv4 header with IP protocol=17 and static payload. MAC \ | ... | addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lb_plugin.so @@ -64,9 +69,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs LoadBalancer maglev config.\ +| | ... | - **[Cfg]** DUT runs LoadBalancer maglev config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-nat4-ndrpdr.robot b/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-nat4-ndrpdr.robot index ba0ebd021e..20620ed210 100644 --- a/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-nat4-ndrpdr.robot +++ b/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-nat4-ndrpdr.robot @@ -26,25 +26,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput loadbalancer nat4 test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput loadbalancer nat4 test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for LoadBalancer nat4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with LoadBalancer\ -| ... | nat4 and two static IPv4 /24 route entries. DUT1 tested with\ -| ... | ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L4 flow-groups (flow-group per direction, 6 flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=17 and static payload. MAC addresses are matching MAC\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for LoadBalancer nat4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with LoadBalancer \ +| ... | nat4 and two static IPv4 /24 route entries. DUT1 tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L4 flow-groups (flow-group per direction, 6 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=17 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lb_plugin.so @@ -63,9 +68,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs LoadBalancer nat4 config.\ +| | ... | - **[Cfg]** DUT runs LoadBalancer nat4 config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot index 13ab555635..6305950a9d 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 10 chains -| ... | 10 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 10 \ +| ... | chains 10 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot index 3c50fee210..2b8dd07af8 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 10 chains -| ... | 10 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 10 \ +| ... | chains 10 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot index 22f7a58b78..2fed1befdd 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 10 chains -| ... | 20 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 10 \ +| ... | chains 20 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot index 9c58783753..acb97f0186 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 6 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 6 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot index 4e231c13be..5f2b7d885e 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 6 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 6 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot index 2a2fec31f4..461bb70851 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 8 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 8 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot index 772a803a02..759dcd3ad7 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 8 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 8 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot index 1414a3f732..1a5ff16fc7 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 10 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 10 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot index 4702648623..1de1be0bf1 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 10 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 10 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domainsand MAC learning enabled. DUT1 tested with ${nic_name}. +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot index e494ac05bf..270b1272bd 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 1 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 1 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot index ac9ce1cc1b..90b0c806f8 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 1 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 1 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot index c720a45dd7..a360c5c59f 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 2 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 2 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot index 7149698fda..80671e2a74 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 2 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 2 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot index ca6cbc5671..536beb8fb5 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 4 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 4 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot index 02cba051f6..7bb3e9864c 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 4 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 4 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot index 7aeec1005b..d1d65cb577 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains -| ... | 8 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 2 chains 8 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot index 74c254ef1a..eb0c84267f 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains -| ... | 8 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 2 chains 8 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot index 844e84d1ba..f141a5d481 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains -| ... | 12 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 2 chains 12 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot index 8a59a79f1f..a69b285002 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains -| ... | 12 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 2 chains 12 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot index 9878b54e2e..d942801292 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains -| ... | 16 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 2 chains 16 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot index a8f77b3706..2c59f700d0 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot @@ -28,27 +28,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains -| ... | 16 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 2 chains 16 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -75,9 +79,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot index 5ad81f11a2..832714800e 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains -| ... | 20 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 2 chains 20 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot index bde57e98fa..2ae915fcb4 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains -| ... | 2 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 2 chains 2 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot index afce74f80b..0ce59acd8a 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains -| ... | 2 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 2 chains 2 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot index 19d6862c6a..0015d457cc 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains -| ... | 4 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 2 chains 4 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot index 25ca78a53f..dc66918c24 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains -| ... | 4 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 2 chains 4 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot index 5cd468aa82..799dc93714 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 4 chains -| ... | 8 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 4 chains 8 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot index 54e5895546..ecf2d4d42a 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 4 chains -| ... | 8 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 4 chains 8 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot index 0951fc3b04..a54062105c 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 4 chains -| ... | 16 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 4 chains 16 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot index 026e51d359..53f8672ab6 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 4 chains -| ... | 16 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 4 chains 16 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot index 76968d0f35..efbfbc2c25 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 4 chains -| ... | 24 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 4 chains 24 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot index 7a9375cc87..acc6e19c0c 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 4 chains -| ... | 4 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 4 chains 4 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot index dd0475ff56..49fe257376 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 4 chains -| ... | 4 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 4 chains 4 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot index 7e4bf66cd0..98988a8782 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 6 chains -| ... | 6 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 6 chains 6 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot index 34b1e80609..a9273ce6e0 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 6 chains -| ... | 6 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 6 chains 6 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot index a55ea569bd..ed38bd9f0f 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 6 chains -| ... | 12 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 6 chains 12 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domainsand MAC learning enabled. DUT1 tested with ${nic_name}. +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot index 4d4a2af90b..474a300fb3 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 6 chains -| ... | 12 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 6 chains 12 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot index 1c87a9ad8b..e52a9499de 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 6 chains -| ... | 24 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 6 chains 24 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot index 3439e630a7..93d32c0857 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 8 chains -| ... | 8 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 8 chains 8 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot index 81b132d051..bc9efd7cf3 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 8 chains -| ... | 8 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 8 chains 8 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot index bde55e54c6..b0b3cd3fea 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 8 chains -| ... | 16 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 8 chains 16 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot index 61d908ee18..82c34ba477 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 8 chains -| ... | 16 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \ +| ... | 8 chains 16 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot index 7e57ec0bd4..b02bd4bb00 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 8 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 8 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot index 498416d416..1d34a5ad30 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 1 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 1 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot index 1bf5acec9f..4c352b74a7 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 2 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 2 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot index 0292704415..24ff94b5d7 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 4 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 4 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot index 780fd75e47..9ce93406db 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 8 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 8 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot index 8db6b11824..3c4b989582 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 1 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 1 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot index 24841525e6..a1afc3946d 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 2 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 2 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot index 930b7d61ea..f75f0211c9 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 4 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 4 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot index 8c8d689df9..e50e978d9c 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 8 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 8 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot index 3810bc9983..65f1be8880 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 1 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 1 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot index ec19a00b20..51ea08c814 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 2 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 2 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot index 9a0318a629..604219cc7c 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 4 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 4 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot index 3d8cbede5d..bf2bbf35c3 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 8 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 8 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot index df0db3d53f..c8b69778e4 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 1 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 1 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot index cee11ba512..0baad2c45a 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 2 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 2 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot index 99bf94f756..8079ee82b9 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 4 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 4 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot index 8944e8e6dc..8cd5b7eab9 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 8 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 8 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} | | ... | ${encr_alg} | ${auth_alg} | ${laddr_ip4} | ${raddr_ip4} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot index c2682c93e5..d4636b14db 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 1 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 1 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot index 71ee884d62..613cf81226 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 2 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 2 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot index 4ad4239530..8f4e1315fd 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 4 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 4 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot index b0357f0a3b..7bce83ee7a 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 8 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 8 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot index 0c3df485e7..22ffc1fb5a 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 1 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 1 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot index 2d783dce31..f1eab2c3eb 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 2 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 2 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot index 0111bb3489..6dbd754489 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 4 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 4 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot index 6adb68e3ff..3fdea0534e 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 1 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 1 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot index f73220a70a..dcebf91b22 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 2 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 2 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot index 55353ca4ef..8d0f8f80bd 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 4 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 4 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot index 73c82ab219..d35997c5c4 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 8 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 8 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot index e846935258..894de6ef53 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 1 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 1 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot index 7b35217919..8684f2c742 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 2 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 2 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot index a63acb78e9..62f7a4e848 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 4 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 4 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot index 34fe8c687b..923d7793f5 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 8 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 8 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot index b4d7ee7202..f899526e1e 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 1 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 1 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot index 54d056e760..d15c43d199 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 2 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 2 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot index f9e20c79df..7a03e27026 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot @@ -28,23 +28,27 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 4 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \ +| ... | 4 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -81,10 +85,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}. -| | ... | containers. +| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \ +| | ... | ${n_instances} containers. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -106,7 +110,7 @@ | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 3-node circular topology \ | | And Stop VPP service on all DUTs | ${nodes} | | And VPP IPsec Create Tunnel Interfaces in Containers | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot index aa14f5f17f..3b672cb501 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 20memif 10 -| ... | pipelines 1 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 20memif 10 \ +| ... | pipelines 1 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot index f0cdb012ff..be9be72c28 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 20memif 10 -| ... | pipelines 1 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 20memif 10 \ +| ... | pipelines 1 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot index a4509e4520..f70330d022 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 20 memif 10 -| ... | pipelines 20 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 20 memif 10 \ +| ... | pipelines 20 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot index c130cd2843..7b90ee1256 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1 -| ... | pipeline 10 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \ +| ... | pipeline 10 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot index eb872deaa2..be38caf4f9 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1 -| ... | pipeline 10 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \ +| ... | pipeline 10 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot index 2c03217c5e..99dd4a3bed 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1 -| ... | pipeline 1 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \ +| ... | pipeline 1 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot index 26e8281448..42de5f3682 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1 -| ... | pipeline 1 docker container* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \ +| ... | pipeline 1 docker container** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot index bad6f4d784..93a86e0952 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1 -| ... | pipeline 2 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \ +| ... | pipeline 2 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot index f0f103d818..55d36087aa 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1 -| ... | pipeline 2 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \ +| ... | pipeline 2 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot index a63bf326d6..b8488dba2c 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1 -| ... | pipeline 4 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \ +| ... | pipeline 4 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot index bb43f21701..2dee783d0a 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1 -| ... | pipeline 4 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \ +| ... | pipeline 4 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot index 3fab95736f..5a6878ec4e 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1 -| ... | pipeline 6 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \ +| ... | pipeline 6 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot index ab829f3309..5619da47a2 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1 -| ... | pipeline 6 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \ +| ... | pipeline 6 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot index b3b4849173..d794125c35 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1 -| ... | pipeline 8 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \ +| ... | pipeline 8 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot index 6bf07895ef..a37472ecc4 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1 -| ... | pipeline 8 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \ +| ... | pipeline 8 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot index 93e9b042b8..890a9d33d8 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4memif 2 -| ... | pipelines 12 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \ +| ... | pipelines 12 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot index a84af5dda0..b22a15fd70 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4memif 2 -| ... | pipelines 12 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \ +| ... | pipelines 12 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot index 0615fa4c8f..7f87e4ce90 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4memif 2 -| ... | pipelines 16 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \ +| ... | pipelines 16 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot index 32026bdf37..05d5b16ea5 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4memif 2 -| ... | pipelines 16 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \ +| ... | pipelines 16 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot index 374a16274e..86cb4aaefa 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4 memif 2 -| ... | pipelines 20 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \ +| ... | pipelines 20 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot index 880230a493..d3e061799f 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4memif 2 -| ... | pipelines 2 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \ +| ... | pipelines 2 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot index 45740ffc29..f68cbbf2b8 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4memif 2 -| ... | pipelines 2 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \ +| ... | pipelines 2 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot index ab2b083e89..6eeb515d11 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 2 -| ... | pipelines 4 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \ +| ... | pipelines 4 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot index fe41245260..90416f60c0 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 2 -| ... | pipelines 4 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \ +| ... | pipelines 4 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot index cfe4f12cf6..a59dfc4901 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4memif 2 -| ... | pipelines 8 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \ +| ... | pipelines 8 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot index bbc8733a7a..b97c8b7763 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4memif 2 -| ... | pipelines 8 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \ +| ... | pipelines 8 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot index 09d9de9f2e..fce6314c4c 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 8memif 4 -| ... | pipelines 4 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4 \ +| ... | pipelines 4 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot index 2bd6990b31..7b6a93310d 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 8memif 4 -| ... | pipelines 4 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4 \ +| ... | pipelines 4 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot index 388a3ed096..a1b8e16b00 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 8memif 4 -| ... | pipelines 16 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4 \ +| ... | pipelines 16 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot index 64e1b1e7d0..d3721f16de 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 8memif 4 -| ... | pipelines 16 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4 \ +| ... | pipelines 16 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot index 6c2bba6161..cab519e492 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 8 memif 4 -| ... | pipelines 24 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4 \ +| ... | pipelines 24 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot index 0d265abd59..b5a1f3872d 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 8memif 4 -| ... | pipelines 8 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4 \ +| ... | pipelines 8 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot index c41108040a..b04420185f 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 8memif 4 -| ... | pipelines 8 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4 \ +| ... | pipelines 8 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot index 22ee0b7bc8..d577b722c6 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 12memif 6 -| ... | pipelines 12 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 12memif 6 \ +| ... | pipelines 12 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot index f047294e12..3e062b08a2 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 12memif 6 -| ... | pipelines 12 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 12memif 6 \ +| ... | pipelines 12 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot index 6a765bf489..92e5a664ed 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 12 memif 6 -| ... | pipelines 24 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 12memif 6 \ +| ... | pipelines 24 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot index 709586ebe6..5f7280295a 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 12memif 6 -| ... | pipelines 1 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 12memif 6 \ +| ... | pipelines 1 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot index 28252cdee1..b759be9119 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 12memif 6 -| ... | pipelines 1 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 12memif 6 \ +| ... | pipelines 1 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot index 75701c4510..fde632079b 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 16memif 8 -| ... | pipelines 16 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 16memif 8 \ +| ... | pipelines 16 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot index 612d31eeb6..a78f82ea1f 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 16memif 8 -| ... | pipelines 16 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 16memif 8 \ +| ... | pipelines 16 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot index 39c7c827e1..d82987b755 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 16memif 8 -| ... | pipelines 8 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 16memif 8 \ +| ... | pipelines 8 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot index f657ccc1a3..60b7f8fdae 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot @@ -27,27 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with 16memif 8 -| ... | pipelines 8 docker containers* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 16memif 8 \ +| ... | pipelines 8 docker containers** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr.robot index 759d8f4e6d..41f465d047 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr.robot @@ -28,27 +28,33 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 20 vhost 10 chains 10 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 20 vhost 10 chains \ +| ... | 10 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +77,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr.robot index a776583343..9b38eb7677 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr.robot @@ -28,27 +28,33 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 20 vhost 10 chains 10 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 20 vhost 10 chains \ +| ... | 10 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +77,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-40vh-20vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-40vh-20vm1t-vppip4-ndrpdr.robot index 092b7a19f0..cabd5af426 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-40vh-20vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-40vh-20vm1t-vppip4-ndrpdr.robot @@ -28,27 +28,33 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 40 vhost 10 chains 20 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 40 vhost 10 chains \ +| ... | 20 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +77,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr.robot index 1bc45bb928..6077e3ae3f 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 12 vhost 1 chain 6 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 12 vhost 1 chain 6 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr.robot index 298d924fdf..9d7946a90d 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 12 vhost 1 chain 6 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 12 vhost 1 chain 6 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr.robot index c47b6548ad..498d0ee31f 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 16 vhost 1 chain 8 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 16 vhost 1 chain 8 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr.robot index 26d876d1e1..df87b85c46 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 16 vhost 1 chain 8 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 16 vhost 1 chain 8 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr.robot index 55e5e2c80c..ab2e7a53e4 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 20 vhost 1 chain 10 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 20 vhost 1 chain 10 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544 +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544 *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr.robot index 15c22e717c..ff14e79fc9 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 20 vhost 1 chain 10 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 20 vhost 1 chain 10 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544 +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544 *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr.robot index 06054d9d6a..288784e8ed 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 2 vhost 1 chain 1 VM* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 2 vhost 1 chain 1 VM** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr.robot index 32ad054c8b..e470f9c493 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 2 vhost 1 chain 1 VM* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 2 vhost 1 chain 1 VM** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr.robot index 9162c3b1e1..d64420346c 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 4 vhost 1 chain 2 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 4 vhost 1 chain 2 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr.robot index 54d5664f0f..4d6e309445 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 4 vhost 1 chain 2 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 4 vhost 1 chain 2 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr.robot index e412686621..321da41a3e 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 8 vhost 1 chains 4 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 8 vhost 1 chains 4 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr.robot index c87adc17ee..657625e82f 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 8 vhost 1 chains 4 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 8 vhost 1 chains 4 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr.robot index a45275bdc3..6ac1160acb 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 16 vhost 2 chains 8 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 16 vhost 2 chains 8 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr.robot index b9e6a3b206..7a92e4a61d 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 16 vhost 2 chains 8 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 16 vhost 2 chains 8 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr.robot index 1c469b8274..686b427361 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr.robot @@ -28,27 +28,33 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 24 vhost 2 chains 12 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 24 vhost 2 chains \ +| ... | 12 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +77,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr.robot index b0a3f7c6a8..d5a3c5aa4e 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr.robot @@ -28,27 +28,33 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 24 vhost 2 chains 12 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 24 vhost 2 chains \ +| ... | 12 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +77,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr.robot index 65d7c70695..fe2a47dcca 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr.robot @@ -28,27 +28,33 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 32 vhost 2 chains 16 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 32 vhost 2 chains \ +| ... | 16 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +77,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr.robot index 3d1a4cb3d9..66a479a402 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr.robot @@ -28,27 +28,33 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 32 vhost 2 chains 16 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 32 vhost 2 chains \ +| ... | 16 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +77,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-40vh-20vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-40vh-20vm1t-vppip4-ndrpdr.robot index b69c31c94d..11ea845ba6 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-40vh-20vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-40vh-20vm1t-vppip4-ndrpdr.robot @@ -28,27 +28,33 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 40 vhost 2 chains 20 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 40 vhost 2 chains \ +| ... | 20 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +77,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr.robot index e60b5d40ce..e8614f79e0 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 4 vhost 2 chains 2 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 4 vhost 2 chains 2 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr.robot index de19cc0e9d..428d4f27bf 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 4 vhost 2 chains 2 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 4 vhost 2 chains 2 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr.robot index 3db8b633c9..e2d69d5305 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 8 vhost 2 chains 4 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 8 vhost 2 chains 4 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr.robot index 72c679ced0..7c74872319 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 8 vhost 2 chains 4 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 8 vhost 2 chains 4 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr.robot index f649e9edf1..ea9339334e 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 16 vhost 4 chains 8 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 16 vhost 4 chains 8 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr.robot index ddfa376ea0..09f570b52e 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 16 vhost 4 chains 8 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 16 vhost 4 chains 8 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr.robot index d8b07b704f..bb13aa4464 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr.robot @@ -28,27 +28,33 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 32 vhost 4 chains 16 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 32 vhost 4 chains \ +| ... | 16 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +77,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr.robot index 6d45dab893..2f95b64458 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr.robot @@ -28,27 +28,33 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 32 vhost 4 chains 16 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 32 vhost 4 chains \ +| ... | 16 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +77,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-48vh-24vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-48vh-24vm1t-vppip4-ndrpdr.robot index 6930cd9ecb..f2dd317f48 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-48vh-24vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-48vh-24vm1t-vppip4-ndrpdr.robot @@ -28,27 +28,33 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 48 vhost 4 chains 24 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 48 vhost 4 chains \ +| ... | 24 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +77,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr.robot index caf908d622..65810ee148 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 8 vhost 4 chains 4 VM* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 8 vhost 4 chains 4 VM** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr.robot index 7a10bc8b22..941af191da 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 8 vhost 4 chains 4 VM* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 8 vhost 4 chains 4 VM** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr.robot index 33f45eced1..cc962503f6 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 12 vhost 6 chains 6 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 12 vhost 6 chains 6 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr.robot index abcbcbf6a7..498d816114 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 12 vhost 6 chains 6 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 12 vhost 6 chains 6 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr.robot index 5edab14cce..7eb8cdeb1f 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr.robot @@ -28,27 +28,33 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 24 vhost 6 chains 12 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 24 vhost 6 chains \ +| ... | 12 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +77,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr.robot index 55204a5890..31c7313e22 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr.robot @@ -28,27 +28,33 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 24 vhost 6 chains 12 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 24 vhost 6 chains \ +| ... | 12 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +77,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-48vh-24vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-48vh-24vm1t-vppip4-ndrpdr.robot index 9064b39f6d..3e2fb16465 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-48vh-24vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-48vh-24vm1t-vppip4-ndrpdr.robot @@ -28,27 +28,33 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 48 vhost 6 chains 24 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 48 vhost 6 chains \ +| ... | 24 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +77,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr.robot index f2e49207c9..9403733165 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 16 vhost 8 chains 8 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 16 vhost 8 chains 8 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr.robot index f3dc6c7261..93fca9e93b 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr.robot @@ -28,27 +28,32 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 16 vhost 8 chains 8 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 16 vhost 8 chains 8 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr.robot index ad8242cc8f..c83cad8fa9 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr.robot @@ -28,27 +28,33 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 32 vhost 8 chains 16 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 32 vhost 8 chains \ +| ... | 16 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +77,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr.robot index ed0c07cc2a..e85f4f01f3 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr.robot @@ -28,27 +28,33 @@ | Test Template | Local Template | | Documentation -| ... | *RFC2544: Pkt throughput L2BD test cases with 32 vhost 8 chains 16 VMs* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | **RFC2544: Pkt throughput L2BD test cases with 32 vhost 8 chains \ +| ... | 16 VMs** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -71,9 +77,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf.robot index a0a8f3cf84..77d05cf1c0 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf.robot @@ -28,28 +28,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet loss L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and +| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\ -| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\ -| ... | between DUT1 and TG. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected\ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ +| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ +| ... | applied on link between DUT1 and TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected \ +| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ +| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance, then measured loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \ +| ... | Rate) with zero packet loss tolerance, then measured loss at this load \ +| ... | while additional chain is configured. \ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ +| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ +| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\ +| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf.robot index 18ef575b1e..3b039b843c 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf.robot @@ -28,28 +28,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet loss L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and +| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\ -| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\ -| ... | between DUT1 and TG. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected\ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ +| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ +| ... | applied on link between DUT1 and TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected \ +| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ +| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance, then measured loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \ +| ... | Rate) with zero packet loss tolerance, then measured loss at this load \ +| ... | while additional chain is configured. \ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ +| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ +| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\ +| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm1t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm1t-testpmd-ndrpdr.robot index 88945b0e82..362cf6f868 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm1t-testpmd-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm1t-testpmd-ndrpdr.robot @@ -28,30 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and +| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\ -| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\ -| ... | between DUT1 and TG. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected\ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ +| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ +| ... | applied on link between DUT1 and TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected \ +| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ +| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ +| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ +| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -75,9 +80,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\ +| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm2t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm2t-testpmd-ndrpdr.robot index 175ea95e38..0079641010 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm2t-testpmd-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm2t-testpmd-ndrpdr.robot @@ -28,30 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and +| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\ -| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\ -| ... | between DUT1 and TG. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected\ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ +| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ +| ... | applied on link between DUT1 and TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected \ +| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ +| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ +| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ +| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -75,9 +80,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\ +| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf.robot index a73d74aac5..ea9768e31e 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf.robot @@ -28,28 +28,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet loss L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and +| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\ -| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\ -| ... | between DUT1 and TG. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected\ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ +| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ +| ... | applied on link between DUT1 and TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected \ +| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ +| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance, then measured loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \ +| ... | Rate) with zero packet loss tolerance, then measured loss at this load \ +| ... | while additional chain is configured. \ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ +| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ +| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\ +| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf.robot index daaf0601b9..edfe00dd11 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf.robot @@ -28,28 +28,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet loss L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and +| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\ -| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\ -| ... | between DUT1 and TG. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected\ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ +| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ +| ... | applied on link between DUT1 and TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected \ +| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ +| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance, then measured loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \ +| ... | Rate) with zero packet loss tolerance, then measured loss at this load \ +| ... | while additional chain is configured. \ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ +| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ +| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\ +| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm1t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm1t-testpmd-ndrpdr.robot index 753694369b..bb1d9ba3e3 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm1t-testpmd-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm1t-testpmd-ndrpdr.robot @@ -28,30 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and +| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\ -| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\ -| ... | between DUT1 and TG. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected\ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ +| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ +| ... | applied on link between DUT1 and TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected \ +| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ +| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ +| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ +| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -75,9 +80,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\ +| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm2t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm2t-testpmd-ndrpdr.robot index f13c1d2b08..2ba72ba791 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm2t-testpmd-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm2t-testpmd-ndrpdr.robot @@ -28,30 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and +| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\ -| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\ -| ... | between DUT1 and TG. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected\ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ +| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ +| ... | applied on link between DUT1 and TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected \ +| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ +| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ +| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ +| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -75,9 +80,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\ +| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf.robot index 55b6d99707..aa31b22bcc 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf.robot @@ -28,28 +28,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet loss L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and +| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\ -| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\ -| ... | between DUT1 and TG. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected\ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ +| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ +| ... | applied on link between DUT1 and TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected \ +| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ +| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance, then measured loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \ +| ... | Rate) with zero packet loss tolerance, then measured loss at this load \ +| ... | while additional chain is configured. \ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ +| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ +| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\ +| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf.robot index fb9882e499..15b2cb50f5 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf.robot @@ -28,28 +28,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet loss L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and +| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\ -| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\ -| ... | between DUT1 and TG. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected\ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ +| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ +| ... | applied on link between DUT1 and TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected \ +| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ +| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance, then measured loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \ +| ... | Rate) with zero packet loss tolerance, then measured loss at this load \ +| ... | while additional chain is configured. \ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ +| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ +| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\ +| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm1t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm1t-testpmd-ndrpdr.robot index 96854cb17e..533e232576 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm1t-testpmd-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm1t-testpmd-ndrpdr.robot @@ -28,30 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and +| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\ -| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\ -| ... | between DUT1 and TG. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected\ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ +| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ +| ... | applied on link between DUT1 and TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected \ +| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ +| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ +| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ +| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -75,9 +80,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\ +| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm2t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm2t-testpmd-ndrpdr.robot index 5a109f13db..aaa862c2d8 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm2t-testpmd-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm2t-testpmd-ndrpdr.robot @@ -28,30 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and +| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\ -| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\ -| ... | between DUT1 and TG. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected\ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ +| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ +| ... | applied on link between DUT1 and TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected \ +| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ +| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ +| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ +| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -75,9 +80,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\ +| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf.robot index 9aaba04b66..6a73767d73 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf.robot @@ -28,28 +28,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and +| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\ -| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\ -| ... | between DUT1 and TG. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected\ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ +| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ +| ... | applied on link between DUT1 and TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected \ +| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ +| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance, then measured loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \ +| ... | Rate) with zero packet loss tolerance, then measured loss at this load \ +| ... | while additional chain is configured. \ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ +| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ +| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\ +| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf.robot index 67f7b00574..89ff4ddfde 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf.robot @@ -28,28 +28,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and +| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\ -| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\ -| ... | between DUT1 and TG. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected\ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ +| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ +| ... | applied on link between DUT1 and TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected \ +| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ +| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance, then measured loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \ +| ... | Rate) with zero packet loss tolerance, then measured loss at this load \ +| ... | while additional chain is configured. \ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ +| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ +| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\ +| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm1t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm1t-testpmd-ndrpdr.robot index 8af7e2842f..fd77197895 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm1t-testpmd-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm1t-testpmd-ndrpdr.robot @@ -28,30 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and +| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\ -| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\ -| ... | between DUT1 and TG. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected\ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ +| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ +| ... | applied on link between DUT1 and TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected \ +| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ +| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ +| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ +| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -75,9 +80,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\ +| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm2t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm2t-testpmd-ndrpdr.robot index 71153b5c0f..c113b6b4f9 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm2t-testpmd-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm2t-testpmd-ndrpdr.robot @@ -28,30 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and +| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\ -| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\ -| ... | between DUT1 and TG. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected\ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ +| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ +| ... | applied on link between DUT1 and TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected \ +| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ +| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ +| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ +| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -75,9 +80,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\ +| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm1t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm1t-testpmd-ndrpdr.robot index d74b2380ba..cb820f1227 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm1t-testpmd-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm1t-testpmd-ndrpdr.robot @@ -28,30 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and +| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\ -| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\ -| ... | between DUT1 and TG. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected\ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ +| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ +| ... | applied on link between DUT1 and TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected \ +| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ +| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ +| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ +| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -75,9 +80,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\ +| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm2t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm2t-testpmd-ndrpdr.robot index 6ed05ba6f7..8072729392 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm2t-testpmd-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm2t-testpmd-ndrpdr.robot @@ -28,30 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and +| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\ -| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\ -| ... | between DUT1 and TG. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected\ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ +| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ +| ... | applied on link between DUT1 and TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected \ +| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ +| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ +| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ +| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -75,9 +80,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\ +| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf.robot index 58a2908a3f..9494cd9d51 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf.robot @@ -28,28 +28,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet loss L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and +| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\ -| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\ -| ... | between DUT1 and TG. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected\ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ +| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ +| ... | applied on link between DUT1 and TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected \ +| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ +| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance, then measured loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \ +| ... | Rate) with zero packet loss tolerance, then measured loss at this load \ +| ... | while additional chain is configured. \ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ +| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ +| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\ +| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf.robot index 5d9ea7cdfb..6370c55d88 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf.robot @@ -28,28 +28,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet loss L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and +| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\ -| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\ -| ... | between DUT1 and TG. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected\ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ +| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ +| ... | applied on link between DUT1 and TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected \ +| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ +| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance, then measured loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \ +| ... | Rate) with zero packet loss tolerance, then measured loss at this load \ +| ... | while additional chain is configured. \ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ +| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ +| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\ +| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm1t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm1t-testpmd-ndrpdr.robot index bf27418847..edeeb04c12 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm1t-testpmd-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm1t-testpmd-ndrpdr.robot @@ -28,30 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and +| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\ -| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\ -| ... | between DUT1 and TG. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected\ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ +| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ +| ... | applied on link between DUT1 and TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected \ +| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ +| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ +| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ +| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -75,9 +80,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\ +| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm2t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm2t-testpmd-ndrpdr.robot index 5a53181f1a..08d87e6359 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm2t-testpmd-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm2t-testpmd-ndrpdr.robot @@ -28,30 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and +| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\ -| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\ -| ... | between DUT1 and TG. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected\ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ +| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ +| ... | applied on link between DUT1 and TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected \ +| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ +| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ +| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ +| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -75,9 +80,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\ +| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf.robot index c5c0816eee..19b19fbe3c 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf.robot @@ -28,28 +28,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet loss L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and +| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\ -| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\ -| ... | between DUT1 and TG. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected\ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ +| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ +| ... | applied on link between DUT1 and TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected \ +| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ +| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance, then measured loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \ +| ... | Rate) with zero packet loss tolerance, then measured loss at this load \ +| ... | while additional chain is configured. \ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ +| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ +| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\ +| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf.robot index fd26e1f452..a4f594257d 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf.robot @@ -28,28 +28,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet loss L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and +| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\ -| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\ -| ... | between DUT1 and TG. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\ -| ... | domain and MAC learning enabled. Qemu VNFs are connected\ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ +| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ +| ... | applied on link between DUT1 and TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ +| ... | domain and MAC learning enabled. Qemu VNFs are connected \ +| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ +| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance, then measured loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \ +| ... | Rate) with zero packet loss tolerance, then measured loss at this load \ +| ... | while additional chain is configured. \ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ +| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ +| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ | ... | matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so @@ -74,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\ +| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot index d5ab992073..4dddd7ccb1 100644 --- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot @@ -27,29 +27,35 @@ | | Test Template | Local Template | -| Documentation | *Packet throughput Segment routing over IPv6 dataplane with\ -| ... | one SID (SRH not inserted) test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-IPv6 on DUT1-DUT2, Eth-IPv6 on\ -| ... | TG-DUTn for IPv6 routing over SRv6. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and static route, SR policy and steering policy for one\ -| ... | direction and one SR behaviour (function) - End.DX6 - for other\ -| ... | direction. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 253 flows per flow-group) with\ -| ... | all packets containing Ethernet header,IPv6 header with static payload.\ +| Documentation | **Packet throughput Segment routing over IPv6 dataplane with \ +| ... | one SID (SRH not inserted) test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6-IPv6 on DUT1-DUT2, \ +| ... | Eth-IPv6 on TG-DUTn for IPv6 routing over SRv6. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \ +| ... | routing and static route, SR policy and steering policy for one \ +| ... | direction and one SR behaviour (function) - End.DX6 - for other \ +| ... | direction. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 253 flows per flow-group) with \ +| ... | all packets containing Ethernet header,IPv6 header with static \ +| ... | payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ -| ... | draft 3. +| ... | +| ... | - **[Ref] Applicable standard specifications:** SRv6 Network \ +| ... | Programming - draft 3. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -85,11 +91,11 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 and DUT2 are configured with IPv6\ -| | ... | routing and static route, SR policy and steering policy for one\ -| | ... | direction and one SR behaviour (function) - End - for other direction. +| | ... | - **[Cfg]** DUT1 and DUT2 are configured with IPv6 routing \ +| | ... | and static route, SR policy and steering policy for one direction \ +| | ... | and one SR behaviour (function) - End - for other direction. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot index 34511bd292..3498aa787f 100644 --- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot @@ -27,29 +27,35 @@ | | Test Template | Local Template | -| Documentation | *Packet throughput Segment routing over IPv6 dataplane with\ -| ... | two SIDs (SRH inserted) test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2, Eth-IPv6\ -| ... | on TG-DUTn for IPv6 routing over SRv6. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and static route, SR policy and steering policy for one\ -| ... | direction and two SR behaviours (functions) - End and End.DX6 - for\ -| ... | other direction. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 253 flows per flow-group) with\ -| ... | all packets containing Ethernet header,IPv6 header with static payload.\ +| Documentation | **Packet throughput Segment routing over IPv6 dataplane with \ +| ... | two SIDs (SRH inserted) test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6-SRH-IPv6 on DUT1-DUT2, \ +| ... | Eth-IPv6 on TG-DUTn for IPv6 routing over SRv6. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \ +| ... | routing and static route, SR policy and steering policy for one \ +| ... | direction and two SR behaviours (functions) - End and End.DX6 - for \ +| ... | other direction. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 253 flows per flow-group) with \ +| ... | all packets containing Ethernet header,IPv6 header with static \ +| ... | payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ -| ... | draft 3. +| ... | +| ... | - **[Ref] Applicable standard specifications:** SRv6 Network \ +| ... | Programming - draft 3. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -88,12 +94,12 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 and DUT2 are configured with IPv6\ -| | ... | routing and static route, SR policy and steering policy for one\ -| | ... | direction and two SR behaviours (functions) - End and End.DX6 - for\ +| | ... | - **[Cfg]** DUT1 and DUT2 are configured with IPv6 \ +| | ... | routing and static route, SR policy and steering policy for one \ +| | ... | direction and two SR behaviours (functions) - End and End.DX6 - for \ | | ... | other direction. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot index f35590f62e..4f37c1c66f 100644 --- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot @@ -27,29 +27,35 @@ | | Test Template | Local Template | -| Documentation | *Packet throughput Segment routing over IPv6 dataplane with\ -| ... | two SIDs (SRH inserted) without decapsulation test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and\ +| Documentation | **Packet throughput Segment routing over IPv6 dataplane with \ +| ... | two SIDs (SRH inserted) without decapsulation test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and \ | ... | DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and static route, SR policy and steering policy for one\ -| ... | direction and one SR behaviour (function) - End - for other direction.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 253 flows per flow-group) with\ -| ... | all packets containing Ethernet header,IPv6 header with static payload.\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \ +| ... | routing and static route, SR policy and steering policy for one \ +| ... | direction and one SR behaviour (function) - End - for other direction. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 253 flows per flow-group) with \ +| ... | all packets containing Ethernet header,IPv6 header with static \ +| ... | payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ -| ... | draft 3. +| ... | +| ... | - **[Ref] Applicable standard specifications:** SRv6 Network \ +| ... | Programming - draft 3. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -88,11 +94,11 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 and DUT2 are configured with IPv6\ -| | ... | routing and static route, SR policy and steering policy for one\ -| | ... | direction and one SR behaviour (function) - End - for other direction. +| | ... | - **[Cfg]** DUT1 and DUT2 are configured with IPv6 routing \ +| | ... | and static route, SR policy and steering policy for one direction \ +| | ... | and one SR behaviour (function) - End - for other direction. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot index 2861e7f62a..af154cc5ea 100644 --- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot @@ -27,29 +27,36 @@ | | Test Template | Local Template | -| Documentation | *Packet throughput Segment routing over IPv6 dataplane with\ -| ... | Dynamic SRv6 proxy test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and\ +| Documentation | **Packet throughput Segment routing over IPv6 dataplane with \ +| ... | Dynamic SRv6 proxy test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and \ | ... | DUTn->TG, Eth-IPv6 on TG->DUTn and DUTn-CNT for IPv6 routing over SRv6. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and static route, SR policy and steering policy for one\ -| ... | direction and one SR behaviour (function) - End.AD - for other\ -| ... | direction. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 253 flows per flow-group) with\ -| ... | all packets containing Ethernet header,IPv6 header with static payload.\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \ +| ... | routing and static route, SR policy and steering policy for one \ +| ... | direction and one SR behaviour (function) - End.AD - for other \ +| ... | direction. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 253 flows per flow-group) with \ +| ... | all packets containing Ethernet header,IPv6 header with static \ +| ... | payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ -| ... | draft 3 and Segment Routing for Service Chaining - internet draft 01. +| ... | +| ... | - **[Ref] Applicable standard specifications:** SRv6 Network \ +| ... | Programming - draft 3.and Segment Routing for Service Chaining \ +| ... | - internet draft 01. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -100,11 +107,11 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 and DUT2 are configured with IPv6\ -| | ... | routing and static route, SR policy and steering policy for one\ -| | ... | direction and SR behaviour (function) - End.AD - for other direction. +| | ... | - **[Cfg]** DUT1 and DUT2 are configured with IPv6 routing \ +| | ... | and static route, SR policy and steering policy for one direction \ +| | ... | and SR behaviour (function) - End.AD - for other direction. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot index 06af35633d..07f2312e81 100644 --- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot @@ -27,29 +27,36 @@ | | Test Template | Local Template | -| Documentation | *Packet throughput Segment routing over IPv6 dataplane with\ -| ... | Masquerading SRv6 proxy test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2, DUTn-CNT\ -| ... | and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and static route, SR policy and steering policy for one\ -| ... | direction and one SR behaviour (function) - End.AM - for other\ -| ... | direction. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 253 flows per flow-group) with\ -| ... | all packets containing Ethernet header,IPv6 header with static payload.\ +| Documentation | **Packet throughput Segment routing over IPv6 dataplane with \ +| ... | Masquerading SRv6 proxy test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6-SRH-IPv6 on DUT1-DUT2, \ +| ... | DUTn-CNT and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \ +| ... | routing and static route, SR policy and steering policy for one \ +| ... | direction and one SR behaviour (function) - End.AM - for other \ +| ... | direction. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 253 flows per flow-group) with \ +| ... | all packets containing Ethernet header,IPv6 header with static \ +| ... | payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ -| ... | draft 3 and Segment Routing for Service Chaining - internet draft 01. +| ... | +| ... | - **[Ref] Applicable standard specifications:** SRv6 Network \ +| ... | Programming - draft 3.and Segment Routing for Service Chaining \ +| ... | - internet draft 01. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -100,11 +107,11 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 and DUT2 are configured with IPv6\ -| | ... | routing and static route, SR policy and steering policy for one\ -| | ... | direction and SR behaviour (function) - End.AM - for other direction. +| | ... | - **[Cfg]** DUT1 and DUT2 are configured with IPv6 routing \ +| | ... | and static route, SR policy and steering policy for one direction \ +| | ... | and SR behaviour (function) - End.AM - for other direction. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot index ea46dac735..79a298ab1e 100644 --- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot @@ -27,29 +27,36 @@ | | Test Template | Local Template | -| Documentation | *Packet throughput Segment routing over IPv6 dataplane with\ -| ... | Static SRv6 proxy test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and\ +| Documentation | **Packet throughput Segment routing over IPv6 dataplane with \ +| ... | Static SRv6 proxy test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and \ | ... | DUTn->TG, Eth-IPv6 on TG->DUTn and DUTn-CNT for IPv6 routing over SRv6. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and static route, SR policy and steering policy for one\ -| ... | direction and one SR behaviour (function) - End.AS - for other\ -| ... | direction. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 253 flows per flow-group) with\ -| ... | all packets containing Ethernet header,IPv6 header with static payload.\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \ +| ... | routing and static route, SR policy and steering policy for one \ +| ... | direction and one SR behaviour (function) - End.AS - for other \ +| ... | direction. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 253 flows per flow-group) with \ +| ... | all packets containing Ethernet header,IPv6 header with static \ +| ... | payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ -| ... | draft 3 and Segment Routing for Service Chaining - internet draft 01. +| ... | +| ... | - **[Ref] Applicable standard specifications:** SRv6 Network \ +| ... | Programming - draft 3.and Segment Routing for Service Chaining \ +| ... | - internet draft 01. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so @@ -100,11 +107,11 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT1 and DUT2 are configured with IPv6\ -| | ... | routing and static route, SR policy and steering policy for one\ -| | ... | direction and SR behaviour (function) - End.AS - for other direction. +| | ... | - **[Cfg]** DUT1 and DUT2 are configured with IPv6 routing \ +| | ... | and static route, SR policy and steering policy for one direction \ +| | ... | and SR behaviour (function) - End.AS - for other direction. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot index b2b757e929..292fcadecb 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -28,30 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost and vpp -| ... | link bonding* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. 802.1q -| ... | tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with VPP -| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and +| Documentation | **RFC2544: Pkt throughput L2BD test cases with vhost and vpp \ +| ... | link bonding** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ +| ... | 802.1q tagging is applied on link between DUT1 and DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with VPP \ +| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and \ | ... | DUT2 and L2 bridge-domain with MAC learning enabled. Qemu VNFs are \ | ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so @@ -81,9 +86,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot index c35e958647..d77747cf19 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot @@ -28,30 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost and vpp -| ... | link bonding* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. 802.1q -| ... | tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with VPP -| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and +| Documentation | **RFC2544: Pkt throughput L2BD test cases with vhost and vpp \ +| ... | link bonding** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ +| ... | 802.1q tagging is applied on link between DUT1 and DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with VPP \ +| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and \ | ... | DUT2 and L2 bridge-domain with MAC learning enabled. Qemu VNFs are \ | ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so @@ -81,9 +86,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot index ee7e4b12fa..83ee9ba158 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -28,30 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost and vpp -| ... | link bonding* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. 802.1q -| ... | tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with VPP -| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and +| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost and vpp \ +| ... | link bonding** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. \ +| ... | 802.1q tagging is applied on link between DUT1 and DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with VPP \ +| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and \ | ... | DUT2 and L2 cross- connect. Qemu VNFs are \ | ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so @@ -79,9 +84,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | - **[Cfg]** DUT runs L2XC switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot index d0aa44d77d..0e93bf1e6c 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot @@ -28,30 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost and vpp -| ... | link bonding* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. 802.1q -| ... | tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with VPP -| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and +| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost and vpp \ +| ... | link bonding** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. \ +| ... | 802.1q tagging is applied on link between DUT1 and DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with VPP \ +| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and \ | ... | DUT2 and L2 cross- connect. Qemu VNFs are \ | ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so @@ -79,9 +84,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | - **[Cfg]** DUT runs L2XC switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot index 1a1fdd7ab2..ca4c3fb896 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -28,31 +28,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost and vpp -| ... | link bonding* -| -| ... | *[Top] Network Topologies:* TG-DUT1=DUT2-TG 3-node circular topology -| ... | with single links between TG and DUT nodes and double link between DUT -| ... | nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. 802.1q -| ... | tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with VPP -| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and +| Documentation | **RFC2544: Pkt throughput L2BD test cases with vhost and vpp \ +| ... | link bonding** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1=DUT2-TG 3-node circular \ +| ... | topology with single links between TG and DUT nodes and double link \ +| ... | between DUT nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ +| ... | 802.1q tagging is applied on link between DUT1 and DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with VPP \ +| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and \ | ... | DUT2 and L2 bridge-domain with MAC learning enabled. Qemu VNFs are \ | ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so @@ -82,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot index 141443d0a8..bd2009c718 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot @@ -28,31 +28,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost and vpp -| ... | link bonding* -| -| ... | *[Top] Network Topologies:* TG-DUT1=DUT2-TG 3-node circular topology -| ... | with single links between TG and DUT nodes and double link between DUT -| ... | nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. 802.1q -| ... | tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with VPP -| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and +| Documentation | **RFC2544: Pkt throughput L2BD test cases with vhost and vpp \ +| ... | link bonding** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1=DUT2-TG 3-node circular \ +| ... | topology with single links between TG and DUT nodes and double link \ +| ... | between DUT nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ +| ... | 802.1q tagging is applied on link between DUT1 and DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with VPP \ +| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and \ | ... | DUT2 and L2 bridge-domain with MAC learning enabled. Qemu VNFs are \ | ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so @@ -82,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot index 82fe9bdc91..375df7d4c5 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -28,31 +28,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost and vpp -| ... | link bonding* -| -| ... | *[Top] Network Topologies:* TG-DUT1=DUT2-TG 3-node circular topology -| ... | with single links between TG and DUT nodes and double link between DUT -| ... | nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. 802.1q -| ... | tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with VPP -| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and +| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost and vpp \ +| ... | link bonding** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1=DUT2-TG 3-node circular \ +| ... | topology with single links between TG and DUT nodes and double link \ +| ... | between DUT nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. \ +| ... | 802.1q tagging is applied on link between DUT1 and DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with VPP \ +| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and \ | ... | DUT2 and L2 cross- connect. Qemu VNFs are \ | ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | - **[Cfg]** DUT runs L2XC switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot index d110de82a5..4010bf930c 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot @@ -28,31 +28,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost and vpp -| ... | link bonding* -| -| ... | *[Top] Network Topologies:* TG-DUT1=DUT2-TG 3-node circular topology -| ... | with single links between TG and DUT nodes and double link between DUT -| ... | nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. 802.1q -| ... | tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with VPP -| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and +| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost and vpp \ +| ... | link bonding** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1=DUT2-TG 3-node circular \ +| ... | topology with single links between TG and DUT nodes and double link \ +| ... | between DUT nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. \ +| ... | 802.1q tagging is applied on link between DUT1 and DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with VPP \ +| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and \ | ... | DUT2 and L2 cross- connect. Qemu VNFs are \ | ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so @@ -80,9 +85,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | - **[Cfg]** DUT runs L2XC switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot index 94937b5ec4..8a906500cf 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -27,30 +27,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD with vhost and IEEE 802.1Q test -| ... | cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. IEEE\ -| ... | 802.1Q tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\ +| Documentation | **RFC2544: Pkt throughput L2BD with vhost and IEEE 802.1Q \ +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ +| ... | IEEE 802.1Q tagging is applied on link between DUT1 and DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | bridge-\ | ... | domain and MAC learning enabled. Qemu VNFs are \ | ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are\ -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\ -| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are \ +| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 \ +| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -77,9 +83,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD switching with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD switching with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot index e03e8ccdb4..d427ba6bd8 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot @@ -27,30 +27,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD with vhost abd IEEE 802.1Q test -| ... | cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. IEEE\ -| ... | 802.1Q tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\ +| Documentation | **RFC2544: Pkt throughput L2BD with vhost abd IEEE 802.1Q \ +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ +| ... | IEEE 802.1Q tagging is applied on link between DUT1 and DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 +| ... | bridge-\ | ... | domain and MAC learning enabled. Qemu VNFs are \ | ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are\ -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\ -| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are \ +| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 \ +| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -77,9 +83,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD switching with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD switching with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot index 94633eb1df..517310d332 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -27,28 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. 802.1q -| ... | tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. Qemu VNFs are \ +| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. \ +| ... | 802.1q tagging is applied on link between DUT1 and DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | cross-connect. Qemu VNFs are \ | ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -73,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | - **[Cfg]** DUT runs L2XC switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot index 981f37fbc7..4246f14c9a 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot @@ -27,28 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. 802.1q -| ... | tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. Qemu VNFs are \ +| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. \ +| ... | 802.1q tagging is applied on link between DUT1 and DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | cross-connect. Qemu VNFs are \ | ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -73,9 +78,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | - **[Cfg]** DUT runs L2XC switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot index de9eb59eb5..ce423cb3d1 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -27,28 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge- -| ... | domain and MAC learning enabled. Qemu VNFs are \ +| Documentation | **RFC2544: Pkt throughput L2BD test cases with vhost** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | bridge-domain and MAC learning enabled. Qemu VNFs are \ | ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 253 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot index d7a1c09a20..837be6ea54 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot @@ -27,28 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge- -| ... | domain and MAC learning enabled. Qemu VNFs are \ +| Documentation | **RFC2544: Pkt throughput L2BD test cases with vhost** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 +| ... | bridge-domain and MAC learning enabled. Qemu VNFs are \ | ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 253 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot index 053403460c..2d64a5e3a5 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -27,27 +27,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. Qemu VNFs are \ +| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | cross-connect. Qemu VNFs are \ | ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -70,9 +75,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | - **[Cfg]** DUT runs L2XC switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot index 160a62a182..49e1a8f8c1 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot @@ -27,27 +27,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. Qemu VNFs are \ +| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | cross-connect. Qemu VNFs are \ | ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -70,9 +75,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | - **[Cfg]** DUT runs L2XC switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot index 7fe2b7dd92..e6e00282d9 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -27,27 +27,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 test cases with vhost* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 +| Documentation | **RFC2544: Pkt throughput IPv4 test cases with vhost** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ | ... | routing and two static IPv4 /24 route entries. Qemu VNFs are \ | ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -70,9 +75,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot index b86a5cb1f3..5a6f1e3cf4 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot @@ -27,27 +27,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 test cases with vhost* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 +| Documentation | **RFC2544: Pkt throughput IPv4 test cases with vhost** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ | ... | routing and two static IPv4 /24 route entries. Qemu VNFs are \ | ... | connected to VPP via vhost-user interfaces. Guest is running VPP ip4 \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -70,9 +75,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot index 325e33a771..73e263a1a7 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -27,29 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with VXLANoIPv4 -| ... | and vhost* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| Documentation | **RFC2544: Pkt throughput L2BD test cases with VXLANoIPv4. \ +| ... | and vhost** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ | ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge- -| ... | domain and MAC learning enabled. Qemu VNFs are \ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | bridge-domain and MAC learning enabled. Qemu VNFs are \ | ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -74,9 +79,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot index 82262e930d..e7bef37e4c 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot @@ -27,29 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with VXLANoIPv4 -| ... | and vhost* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| Documentation | **RFC2544: Pkt throughput L2BD test cases with VXLANoIPv4. \ +| ... | and vhost** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ | ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge- -| ... | domain and MAC learning enabled. Qemu VNFs are \ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | bridge-domain and MAC learning enabled. Qemu VNFs are \ | ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -74,9 +79,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot index 8a87ebb674..ce4b44e11c 100644 --- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -27,29 +27,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD with vhost and IEEE 802.1Q test -| ... | cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. IEEE\ -| ... | 802.1Q tagging is applied on link between DUT1-if2 and TG-if2. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain and\ -| ... | MAC learning enabled. Qemu VNFs are connected to VPP via\ +| Documentation | **RFC2544: Pkt throughput L2BD with vhost and IEEE 802.1Q \ +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ +| ... | IEEE 802.1Q tagging is applied on link between DUT1-if2 and TG-if2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\ +| ... | domain and \ +| ... | MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running testpmd interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -76,9 +82,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD switching with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD switching with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot index 7acc6c36cf..bc316687f3 100644 --- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot @@ -27,29 +27,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD with vhost and IEEE 802.1Q test -| ... | cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. IEEE\ -| ... | 802.1Q tagging is applied on link between DUT1-if2 and TG-if2. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain and\ -| ... | MAC learning enabled. Qemu VNFs are connected to VPP via\ +| Documentation | **RFC2544: Pkt throughput L2BD with vhost and IEEE 802.1Q \ +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ +| ... | IEEE 802.1Q tagging is applied on link between DUT1-if2 and TG-if2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\ +| ... | domain and \ +| ... | MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP l2xc interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -76,9 +82,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD switching with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD switching with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot index 7ce6d8acba..08a12cbddb 100644 --- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot @@ -27,29 +27,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD with vhost and IEEE 802.1Q test -| ... | cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. IEEE\ -| ... | 802.1Q tagging is applied on link between DUT1-if2 and TG-if2. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain and\ -| ... | MAC learning enabled. Qemu VNFs are connected to VPP via\ +| Documentation | **RFC2544: Pkt throughput L2BD with vhost and IEEE 802.1Q \ +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ +| ... | IEEE 802.1Q tagging is applied on link between DUT1-if2 and TG-if2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\ +| ... | domain and \ +| ... | MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP l2xc interconnecting \ | ... | virtio interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -76,9 +82,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD switching with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD switching with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot index 4589d91780..e928115315 100644 --- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -27,28 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC with vhost abd IEEE 802.1Q test -| ... | cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect of IPv4.\ -| ... | IEEE 802.1Q tagging is applied on link between DUT1-if2 and TG-if2. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross connect and\ -| ... | MAC learning enabled. Qemu VNFs are connected to VPP via\ +| Documentation | **RFC2544: Pkt throughput L2XC with vhost abd IEEE 802.1Q \ +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect \ +| ... | of IPv4. IEEE 802.1Q tagging is applied on link between DUT1-if2 \ +| ... | and TG-if2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 cross-\ +| ... | connect and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running testpmd interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows\ -| ... | per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static\ payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows \ +| ... | per flow-group) with all packets containing Ethernet header, IPv4. \ +| ... | header with IP protocol=61 and static \ payload. MAC addresses are \ | ... | matching MAC addresses of NFs nodes interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -73,9 +79,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2XC switching with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2XC switching with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot index c45324275e..69d006e157 100644 --- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot @@ -27,28 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC with vhost abd IEEE 802.1Q test -| ... | cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect of IPv4.\ -| ... | IEEE 802.1Q tagging is applied on link between DUT1-if2 and TG-if2. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross connect and\ -| ... | MAC learning enabled. Qemu VNFs are connected to VPP via\ +| Documentation | **RFC2544: Pkt throughput L2XC with vhost abd IEEE 802.1Q \ +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect \ +| ... | of IPv4. IEEE 802.1Q tagging is applied on link between DUT1-if2 \ +| ... | and TG-if2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 cross-\ +| ... | connect and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP l2xc interconnecting \ | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows\ -| ... | per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static\ payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows \ +| ... | per flow-group) with all packets containing Ethernet header, IPv4. \ +| ... | header with IP protocol=61 and static \ payload. MAC addresses are \ | ... | matching MAC addresses of NFs nodes interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -73,9 +79,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2XC switching with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2XC switching with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2xcbase-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2xcbase-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot index b784c21457..21457e0d85 100644 --- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2xcbase-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2xcbase-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot @@ -27,28 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC with vhost abd IEEE 802.1Q test -| ... | cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect of IPv4.\ -| ... | IEEE 802.1Q tagging is applied on link between DUT1-if2 and TG-if2. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross connect and\ -| ... | MAC learning enabled. Qemu VNFs are connected to VPP via\ +| Documentation | **RFC2544: Pkt throughput L2XC with vhost abd IEEE 802.1Q \ +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect \ +| ... | of IPv4. IEEE 802.1Q tagging is applied on link between DUT1-if2 \ +| ... | and TG-if2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 cross-\ +| ... | connect and MAC learning enabled. Qemu VNFs are connected to VPP via \ | ... | vhost-user interfaces. Guest is running VPP l2xc interconnecting \ | ... | virtio interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows\ -| ... | per flow-group) with all packets containing Ethernet header, IPv4\ -| ... | header with IP protocol=61 and static\ payload. MAC addresses are\ +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows \ +| ... | per flow-group) with all packets containing Ethernet header, IPv4. \ +| ... | header with IP protocol=61 and static \ payload. MAC addresses are \ | ... | matching MAC addresses of NFs nodes interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -73,9 +79,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2XC switching with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2XC switching with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot index d9f51744a1..ba9d42712c 100644 --- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -27,28 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput L2BD test cases with vhost** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge- +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ | ... | domain and MAC learning enabled. Qemu VNFs are connected \ | ... | to VPP via vhost-user interfaces. Guest is running testpmd \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is tested \ | ... | with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 254 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot index 2d5d2654e3..f9e6a46dd1 100644 --- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot @@ -27,28 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput L2BD test cases with vhost** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge- +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ | ... | domain and MAC learning enabled. Qemu VNFs are connected \ | ... | to VPP via vhost-user interfaces. Guest is running VPP l2xc \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is tested \ | ... | with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 254 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot index f35825fcef..dbfc4974ba 100644 --- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot @@ -27,28 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput L2BD test cases with vhost** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge- +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ | ... | domain and MAC learning enabled. Qemu VNFs are connected \ | ... | to VPP via vhost-user interfaces. Guest is running VPP l2xc \ | ... | interconnecting virtio interfaces, rxd/txd=1024. DUT1 is tested \ | ... | with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 254 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot index 2a65377164..86eb66fce0 100644 --- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -27,27 +27,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross- +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 cross- \ | ... | connect. Qemu VNFs are connected \ | ... | to VPP via vhost-user interfaces. Guest is running testpmd \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is tested \ | ... | with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -70,9 +75,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | - **[Cfg]** DUT runs L2XC switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot index 495b9f16dd..6cf645b93e 100644 --- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot @@ -27,27 +27,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross- +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 cross- \ | ... | connect. Qemu VNFs are connected \ | ... | to VPP via vhost-user interfaces. Guest is running VPP l2xc \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is tested \ | ... | with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -70,9 +75,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | - **[Cfg]** DUT runs L2XC switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot index e94117893f..6a8856969a 100644 --- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross- -| ... | connect. Qemu VNFs are connected to VPP via vhost-user interfaces \ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 cross- \ +| ... | connect. Qemu VNFs are connected to VPP via vhost-user interfaces. \ | ... | Guest is running VPP l2xc interconnecting virtio interfaces, \ | ... | rxd/txd=1024. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -69,9 +74,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | - **[Cfg]** DUT runs L2XC switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot index 02be463bff..1350d99041 100644 --- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -27,27 +27,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 test cases with vhost* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 test cases with vhost** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ | ... | routing and two static IPv4 /24 route entries. Qemu VNFs are connected \ | ... | to VPP via vhost-user interfaces. Guest is running testpmd \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is tested \ | ... | with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -70,9 +75,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot index a3656ab551..b5233bedd2 100644 --- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot @@ -27,27 +27,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 test cases with vhost* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 test cases with vhost** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ | ... | routing and two static IPv4 /24 route entries. Qemu VNFs are connected \ | ... | to VPP via vhost-user interfaces. Guest is running VPP ip4 \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is tested \ | ... | with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -70,9 +75,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2virtiovr1024-1vm-vppip4-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2virtiovr1024-1vm-vppip4-ndrpdr.robot index 2d69774991..4ca2980a2b 100644 --- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2virtiovr1024-1vm-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2virtiovr1024-1vm-vppip4-ndrpdr.robot @@ -27,27 +27,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 test cases with vhost* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 test cases with vhost** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ | ... | routing and two static IPv4 /24 route entries. Qemu VNFs are connected \ | ... | to VPP via vhost-user interfaces. Guest is running VPP ip4 \ | ... | interconnecting virtio interfaces, rxd/txd=1024. DUT1 is tested \ | ... | with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MA\C | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -70,9 +75,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot index 355daf8c4a..6072b5371a 100644 --- a/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot @@ -27,30 +27,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with VXLANoIPv4 -| ... | and vhost* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Packet throughput L2BD test cases with \ +| ... | VXLANoIPv4 and vhost** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ | ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link from/to TG. -| ... | *[Cfg] DUT configuration:* DUTs are configured with L2 bridge- +| ... | +| ... | - **[Cfg] DUT configuration:** DUTs are configured with L2 bridge- \ | ... | domain and MAC learning enabled. Qemu VNFs are connected \ | ... | to VPP via vhost-user interfaces. Guest is running VPP l2xc \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUTs are \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 253 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -75,9 +80,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - L2 Frame Size [B]. Type: integer diff --git a/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot index 68053e1161..a38d5b8d55 100644 --- a/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot @@ -27,30 +27,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with VXLANoIPv4 -| ... | and vhost* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Packet throughput L2BD test cases with \ +| ... | VXLANoIPv4 and vhost** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ | ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link from/to TG. -| ... | *[Cfg] DUT configuration:* DUTs are configured with L2 bridge- +| ... | +| ... | - **[Cfg] DUT configuration:** DUTs are configured with L2 bridge- \ | ... | domain and MAC learning enabled. Qemu VNFs are connected \ | ... | to VPP via vhost-user interfaces. Guest is running VPP l2xc \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUTs are \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 253 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -75,9 +80,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - L2 Frame Size [B]. Type: integer diff --git a/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot index 0cb40dfb3c..c62b53a72d 100644 --- a/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot @@ -27,30 +27,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with VXLANoIPv4 -| ... | and vhost* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Packet throughput L2BD test cases with \ +| ... | VXLANoIPv4 and vhost** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ | ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link from/to TG. -| ... | *[Cfg] DUT configuration:* DUTs are configured with L2 bridge- +| ... | +| ... | - **[Cfg] DUT configuration:** DUTs are configured with L2 bridge- \ | ... | domain and MAC learning enabled. Qemu VNFs are connected \ | ... | to VPP via vhost-user interfaces. Guest is running VPP l2xc \ | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUTs are \ | ... | tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 253 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ +| ... | payload. MAC addresses are matching MAC addresses of the TG node \ | ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -75,9 +80,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - L2 Frame Size [B]. Type: integer |