diff options
5 files changed, 788 insertions, 20 deletions
diff --git a/resources/libraries/robot/performance.robot b/resources/libraries/robot/performance.robot index 59ed57a1ce..58c8f568d1 100644 --- a/resources/libraries/robot/performance.robot +++ b/resources/libraries/robot/performance.robot @@ -453,6 +453,158 @@ | | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | 5.5.5.2 | ${dut2_vif2} | | ... | vrf=${fib_table_2} +| IPv4 forwarding with Vhost-User for '${nr}' VMs initialized in a 3-node circular topology +| | [Documentation] +| | ... | Create pairs of Vhost-User interfaces for defined number of VMs on all +| | ... | VPP nodes. Set UP state of all VPP interfaces in path. Create ${nr}+1 +| | ... | FIB tables on each DUT with multipath routing. Assign each Virtual +| | ... | interface to FIB table with Physical interface or Virtual interface on +| | ... | both nodes. Setup IPv4 addresses with /30 prefix on DUT-TG links and +| | ... | /30 prefix on DUT1-DUT2 link. Set routing on all DUT nodes in all FIB +| | ... | tables with prefix /24 and next hop of neighbour IPv4 address. Setup +| | ... | ARP on all VPP interfaces. +| | ... +| | ... | *Arguments:* +| | ... | _None_ +| | ... +| | ... | *Note:* +| | ... | Socket paths for VM are defined in following format: +| | ... | - /tmp/sock-${VM_ID}-1 +| | ... | - /tmp/sock-${VM_ID}-2 +| | ... +| | ... | *Return:* +| | ... | - No value returned +| | ... +| | ... | *Example:* +| | ... +| | ... | \| IPv4 forwarding with Vhost-User for '2' VMs initialized in \ +| | ... | a 3-node circular topology \| +| | ... +| | VPP interfaces in path are up in a 3-node circular topology +| | ${fib_table_1}= | Set Variable | ${101} +| | ${fib_table_2}= | Evaluate | ${fib_table_1}+${nr} +| | ${dut1_if1_idx}= | Get Interface SW Index | ${dut1} | ${dut1_if1} +| | ${dut1_if2_idx}= | Get Interface SW Index | ${dut1} | ${dut1_if2} +| | Add fib table | ${dut1} | 10.10.10.0 | 24 | ${fib_table_1} +| | ... | via 1.1.1.2 sw_if_index ${dut1_if1_idx} multipath +| | Add fib table | ${dut1} | 20.20.20.0 | 24 | ${fib_table_2} +| | ... | via 2.2.2.2 sw_if_index ${dut1_if2_idx} multipath +| | ${dut2_if1_idx}= | Get Interface SW Index | ${dut2} | ${dut2_if1} +| | ${dut2_if2_idx}= | Get Interface SW Index | ${dut2} | ${dut2_if2} +| | Add fib table | ${dut2} | 10.10.10.0 | 24 | ${fib_table_1} +| | ... | via 2.2.2.1 sw_if_index ${dut2_if1_idx} multipath +| | Add fib table | ${dut2} | 20.20.20.0 | 24 | ${fib_table_2} +| | ... | via 3.3.3.2 sw_if_index ${dut2_if2_idx} multipath +| | Assign Interface To Fib Table | ${dut1} | ${dut1_if1} | ${fib_table_1} +| | Assign Interface To Fib Table | ${dut1} | ${dut1_if2} | ${fib_table_2} +| | Assign Interface To Fib Table | ${dut2} | ${dut2_if1} | ${fib_table_1} +| | Assign Interface To Fib Table | ${dut2} | ${dut2_if2} | ${fib_table_2} +| | IP addresses are set on interfaces | ${dut1} | ${dut1_if1} | 1.1.1.2 | 30 +| | IP addresses are set on interfaces | ${dut1} | ${dut1_if2} | 2.2.2.1 | 30 +| | IP addresses are set on interfaces | ${dut2} | ${dut2_if1} | 2.2.2.2 | 30 +| | IP addresses are set on interfaces | ${dut2} | ${dut2_if2} | 3.3.3.1 | 30 +| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} +| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} +| | Add arp on dut | ${dut1} | ${dut1_if1} | 1.1.1.1 | ${tg1_if1_mac} +| | Add arp on dut | ${dut1} | ${dut1_if2} | 2.2.2.2 | ${dut2_if1_mac} +| | Add arp on dut | ${dut2} | ${dut2_if1} | 2.2.2.1 | ${dut1_if2_mac} +| | Add arp on dut | ${dut2} | ${dut2_if2} | 3.3.3.2 | ${tg1_if2_mac} +| | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | 1.1.1.1 | ${dut1_if1} +| | ... | vrf=${fib_table_1} +| | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | 2.2.2.2 | ${dut1_if2} +| | ... | vrf=${fib_table_2} +| | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | 2.2.2.1 | ${dut2_if1} +| | ... | vrf=${fib_table_1} +| | Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | 3.3.3.2 | ${dut2_if2} +| | ... | vrf=${fib_table_2} +| | ${ip_base_start}= | Set Variable | ${4} +| | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 +| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 +| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 +| | | ${fib_table_1}= | Evaluate | ${100}+${number} +| | | ${fib_table_2}= | Evaluate | ${fib_table_1}+${1} +| | | ${ip_base_vif1}= | Evaluate | ${ip_base_start}+(${number}-1)*2 +| | | ${ip_base_vif2}= | Evaluate | ${ip_base_vif1}+1 +| | | ${ip_net_vif1}= | Set Variable +| | | ... | ${ip_base_vif1}.${ip_base_vif1}.${ip_base_vif1} +| | | ${ip_net_vif2}= | Set Variable +| | | ... | ${ip_base_vif2}.${ip_base_vif2}.${ip_base_vif2} +| | | VPP Vhost interfaces for L2BD forwarding are setup | ${dut1} +| | | ... | ${sock1} | ${sock2} | dut1-vhost-${number}-if1 +| | | ... | dut1-vhost-${number}-if2 +| | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if1} | up +| | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if2} | up +| | | ${dut1_vif1_idx}= | Get Interface SW Index | ${dut1} +| | | ... | ${dut1-vhost-${number}-if1} +| | | ${dut1_vif2_idx}= | Get Interface SW Index | ${dut1} +| | | ... | ${dut1-vhost-${number}-if2} +| | | VPP Vhost interfaces for L2BD forwarding are setup | ${dut2} +| | | ... | ${sock1} | ${sock2} | dut2-vhost-${number}-if1 +| | | ... | dut2-vhost-${number}-if2 +| | | Set Interface State | ${dut2} | ${dut2-vhost-${number}-if1} | up +| | | Set Interface State | ${dut2} | ${dut2-vhost-${number}-if2} | up +| | | ${dut2_vif1_idx}= | Get Interface SW Index | ${dut2} +| | | ... | ${dut2-vhost-${number}-if1} +| | | ${dut2_vif2_idx}= | Get Interface SW Index | ${dut2} +| | | ... | ${dut2-vhost-${number}-if2} +| | | Add fib table | ${dut1} | 20.20.20.0 | 24 | ${fib_table_1} +| | | ... | via ${ip_net_vif1}.1 sw_if_index ${dut1_vif1_idx} multipath +| | | Add fib table | ${dut1} | 10.10.10.0 | 24 | ${fib_table_2} +| | | ... | via ${ip_net_vif2}.2 sw_if_index ${dut1_vif2_idx} multipath +| | | Add fib table | ${dut2} | 20.20.20.0 | 24 | ${fib_table_1} +| | | ... | via ${ip_net_vif1}.1 sw_if_index ${dut2_vif1_idx} multipath +| | | Add fib table | ${dut2} | 10.10.10.0 | 24 | ${fib_table_2} +| | | ... | via ${ip_net_vif2}.2 sw_if_index ${dut2_vif2_idx} multipath +| | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if1} +| | | ... | ${fib_table_1} +| | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if2} +| | | ... | ${fib_table_2} +| | | Assign Interface To Fib Table | ${dut2} | ${dut2-vhost-${number}-if1} +| | | ... | ${fib_table_1} +| | | Assign Interface To Fib Table | ${dut2} | ${dut2-vhost-${number}-if2} +| | | ... | ${fib_table_2} +| | | IP addresses are set on interfaces +| | | ... | ${dut1} | ${dut1-vhost-${number}-if1} | ${ip_net_vif1}.1 | 30 +| | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | ${ip_net_vif2}.1 | 30 +| | | ... | ${dut2} | ${dut2-vhost-${number}-if1} | ${ip_net_vif1}.1 | 30 +| | | ... | ${dut2} | ${dut2-vhost-${number}-if2} | ${ip_net_vif2}.1 | 30 +| | | ${dut1_vif1_mac}= | Get Vhost User Mac By Sw Index | ${dut1} +| | | ... | ${dut1_vif1_idx} +| | | ${dut1_vif2_mac}= | Get Vhost User Mac By Sw Index | ${dut1} +| | | ... | ${dut1_vif2_idx} +| | | ${dut2_vif1_mac}= | Get Vhost User Mac By Sw Index | ${dut2} +| | | ... | ${dut2_vif1_idx} +| | | ${dut2_vif2_mac}= | Get Vhost User Mac By Sw Index | ${dut2} +| | | ... | ${dut2_vif2_idx} +| | | Set Test Variable | ${dut1-vhost-${number}-if1_mac} +| | | ... | ${dut1_vif1_mac} +| | | Set Test Variable | ${dut1-vhost-${number}-if2_mac} +| | | ... | ${dut1_vif2_mac} +| | | Set Test Variable | ${dut2-vhost-${number}-if1_mac} +| | | ... | ${dut2_vif1_mac} +| | | Set Test Variable | ${dut2-vhost-${number}-if2_mac} +| | | ... | ${dut2_vif2_mac} +| | | ${qemu_id}= | Set Variable If | ${number} < 10 | 0${number} +| | | ... | ${number} +| | | Add arp on dut | ${dut1} | ${dut1-vhost-${number}-if1} +| | | ... | ${ip_net_vif1}.2 | 52:54:00:00:${qemu_id}:01 +| | | Add arp on dut | ${dut1} | ${dut1-vhost-${number}-if2} +| | | ... | ${ip_net_vif2}.2 | 52:54:00:00:${qemu_id}:02 +| | | Add arp on dut | ${dut2} | ${dut2-vhost-${number}-if1} +| | | ... | ${ip_net_vif1}.2 | 52:54:00:00:${qemu_id}:01 +| | | Add arp on dut | ${dut2} | ${dut2-vhost-${number}-if2} +| | | ... | ${ip_net_vif2}.2 | 52:54:00:00:${qemu_id}:02 +| | | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | ${ip_net_vif1}.2 +| | | ... | ${dut1-vhost-${number}-if1} | vrf=${fib_table_1} +| | | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | ${ip_net_vif2}.2 +| | | ... | ${dut1-vhost-${number}-if2} | vrf=${fib_table_2} +| | | Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | ${ip_net_vif1}.2 +| | | ... | ${dut2-vhost-${number}-if1} | vrf=${fib_table_1} +| | | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | ${ip_net_vif2}.2 +| | | ... | ${dut2-vhost-${number}-if2} | vrf=${fib_table_2} + | IPv4 policer 2r3c-${t} initialized in a 3-node circular topology | | [Documentation] | | ... | Setup of 2r3c color-aware or color-blind policer with dst ip match @@ -1596,24 +1748,37 @@ | | ... | - vm_name - QemuUtil instance name. Type: string | | ... | - eth0_mac - MAC address of first Vhost interface. Type: string | | ... | - eth1_mac - MAC address of second Vhost interface. Type: string -| | ... | - skip - number of cpus which will be skipped. Type: int -| | ... | - count - number of cpus which will be allocated for qemu. Type: int +| | ... | - skip - number of cpus which will be skipped. Type: integer +| | ... | - count - number of cpus which will be allocated for qemu. +| | ... | Type: integer +| | ... | - qemu_id - Qemu Id when starting more then one guest VM on DUT node. +| | ... | Type: integer | | ... | | ... | *Example:* | | ... | | ... | \| Guest VM with dpdk-testpmd for Vhost L2BD forwarding is setup \ | | ... | \| ${nodes['DUT1']} \| /tmp/sock1 \| /tmp/sock2 \| DUT1_VM \ | | ... | \| 00:00:00:00:00:01 \| 00:00:00:00:00:02 \| ${6} \| ${5} \| +| | ... | \| Guest VM with dpdk-testpmd for Vhost L2BD forwarding is setup \ +| | ... | \| ${nodes['DUT1']} \| /tmp/sock-2-1 \| /tmp/sock-2-2 \| DUT1_VM2 \ +| | ... | \| 00:00:00:00:02:01 \| 00:00:00:00:02:02 \| ${6} \| ${5} \ +| | ... | \| qemu_id=${2} \| | | ... | | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${vm_name} | | ... | ${eth0_mac} | ${eth1_mac} | ${skip}=${6} | ${count}=${5} +| | ... | ${qemu_id}=${1} | | ... | | Import Library | resources.libraries.python.QemuUtils | | ... | WITH NAME | ${vm_name} +| | ${serial_port}= | Evaluate | ${qemu_id} + ${4555} +| | Run keyword | ${vm_name}.Qemu Set Serial Port | ${serial_port} +| | ${ssh_fwd_port}= | Evaluate | ${qemu_id} + ${10021} +| | Run keyword | ${vm_name}.Qemu Set Ssh Fwd Port | ${ssh_fwd_port} | | ${dut_numa}= | Get interfaces numa node | ${dut_node} | | ... | ${dut1_if1} | ${dut1_if2} +| | ${skip_cnt}= | Evaluate | ${skip} + (${qemu_id} - 1) * ${count} | | ${qemu_cpus}= | Cpu slice of list per node | ${dut_node} | ${dut_numa} -| | ... | skip_cnt=${skip} | cpu_cnt=${count} | smt_used=${False} +| | ... | skip_cnt=${skip_cnt} | cpu_cnt=${count} | smt_used=${False} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} | | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node} @@ -1628,6 +1793,42 @@ | | ... | pmd_eth_peer_1=1,${eth1_mac} | pmd_disable_hw_vlan=${True} | | Return From Keyword | ${vm} +| '${nr}' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology +| | [Documentation] +| | ... | Start QEMU guests with two vhost-user interfaces and interconnecting +| | ... | DPDK testpmd with fwd mode set to mac rewrite for defined number of +| | ... | VMs on all defined VPP nodes. +| | ... +| | ... | *Arguments:* +| | ... | _None_ +| | ... +| | ... | _NOTE:_ This KW expects following test case variables to be set: +| | ... | - ${system_cpus} - Number of CPUs allocated for OS itself. +| | ... | - ${vpp_cpus} - Number of CPUs allocated for VPP. +| | ... | - ${vm_cpus} - Number of CPUs to be allocated per QEMU instance. +| | ... +| | ... | *Example:* +| | ... +| | ... | \| '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is \ +| | ... | setup in a 3-node circular topology \| +| | ... +| | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 +| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 +| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 +| | | ${skip_cpus}= | Evaluate | ${vpp_cpus}+${system_cpus} +| | | ${vm1}= | Guest VM with dpdk-testpmd-mac connected via vhost-user is setup +| | | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM${number} +| | | ... | ${dut1-vhost-${number}-if1_mac} +| | | ... | ${dut1-vhost-${number}-if2_mac} | skip=${skip_cpus} +| | | ... | count=${vm_cpus} | qemu_id=${number} +| | | Set To Dictionary | ${dut1_vm_refs} | DUT1_VM${number} | ${vm1} +| | | ${vm2}= | Guest VM with dpdk-testpmd-mac connected via vhost-user is setup +| | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM${number} +| | | ... | ${dut2-vhost-${number}-if1_mac} +| | | ... | ${dut2-vhost-${number}-if2_mac} | skip=${skip_cpus} +| | | ... | count=${vm_cpus} | qemu_id=${number} +| | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM${number} | ${vm2} + | Guest VM with dpdk-testpmd-mac using SMT connected via vhost-user is setup | | [Documentation] | | ... | Start QEMU guest with two vhost-user interfaces and interconnecting diff --git a/tests/perf/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc.robot b/tests/perf/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc.robot index e77d5fbd77..3f4309a91a 100644 --- a/tests/perf/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc.robot @@ -234,7 +234,7 @@ | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \ | | ... | 1 receive queue per NIC port. [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 5kpps, LT=0.5%. +| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | IMIX_v4_1 @@ -401,7 +401,7 @@ | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \ | | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 5kpps. +| | ... | size using binary search start at 10GE linerate, step 10kpps. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | IMIX_v4_1 @@ -434,7 +434,7 @@ | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \ | | ... | 1 receive queue per NIC port. [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 5kpps, LT=0.5%. +| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | IMIX_v4_1 @@ -601,7 +601,7 @@ | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \ | | ... | 2 receive queues per NIC port. [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 5kpps. +| | ... | size using binary search start at 10GE linerate, step 10kpps. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | IMIX_v4_1 @@ -634,7 +634,7 @@ | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \ | | ... | 2 receive queues per NIC port. [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 5kpps, LT=0.5%. +| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | IMIX_v4_1 diff --git a/tests/perf/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhost-2vm-ndrpdrdisc.robot b/tests/perf/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhost-2vm-ndrpdrdisc.robot index 320b1c060e..0f2b6ddc80 100644 --- a/tests/perf/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhost-2vm-ndrpdrdisc.robot +++ b/tests/perf/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhost-2vm-ndrpdrdisc.robot @@ -176,7 +176,7 @@ | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \ | | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 5kpps. +| | ... | size using binary search start at 10GE linerate, step 10kpps. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | 1T1C | STHREAD | NDRDISC | | ${framesize}= | Set Variable | IMIX_v4_1 @@ -204,7 +204,7 @@ | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \ | | ... | 1 receive queue per NIC port. [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 5kpps, LT=0.5%. +| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | IMIX_v4_1 @@ -343,7 +343,7 @@ | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \ | | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 5kpps. +| | ... | size using binary search start at 10GE linerate, step 10kpps. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | IMIX_v4_1 @@ -371,7 +371,7 @@ | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \ | | ... | 1 receive queue per NIC port. [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 5kpps, LT=0.5%. +| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | IMIX_v4_1 @@ -510,7 +510,7 @@ | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \ | | ... | 2 receive queues per NIC port. [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 5kpps. +| | ... | size using binary search start at 10GE linerate, step 10kpps. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | IMIX_v4_1 @@ -538,7 +538,7 @@ | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \ | | ... | 2 receive queues per NIC port. [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 5kpps, LT=0.5%. +| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | IMIX_v4_1 diff --git a/tests/perf/10ge2p1x520-ethip4-ip4base-eth-2vhost-1vm-ndrdisc.robot b/tests/perf/10ge2p1x520-ethip4-ip4base-eth-2vhost-1vm-ndrdisc.robot index b085cfb6c2..bde5fe832c 100644 --- a/tests/perf/10ge2p1x520-ethip4-ip4base-eth-2vhost-1vm-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-ethip4-ip4base-eth-2vhost-1vm-ndrdisc.robot @@ -208,7 +208,7 @@ | | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ | | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 5kpps. +| | ... | size using binary search start at 10GE linerate, step 10kpps. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | 1T1C | STHREAD | NDRDISC | | ${framesize}= | Set Variable | IMIX_v4_1 @@ -243,7 +243,7 @@ | | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ | | ... | 1 receive queue per NIC port. [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 5kpps, LT=0.5%. +| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | IMIX_v4_1 @@ -256,6 +256,7 @@ | | ${dut2_vm_refs}= | Create Dictionary | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo | | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When IPv4 forwarding with Vhost initialized in a 3-node circular topology | | ... | ${sock1} | ${sock2} @@ -419,7 +420,7 @@ | | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ | | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 5kpps. +| | ... | size using binary search start at 10GE linerate, step 10kpps. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | IMIX_v4_1 @@ -454,7 +455,7 @@ | | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ | | ... | 1 receive queue per NIC port. [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 5kpps, LT=0.5%. +| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | IMIX_v4_1 @@ -631,7 +632,7 @@ | | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ | | ... | 2 receive queues per NIC port. [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 5kpps. +| | ... | size using binary search start at 10GE linerate, step 10kpps. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | IMIX_v4_1 @@ -666,7 +667,7 @@ | | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ | | ... | 2 receive queues per NIC port. [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 5kpps, LT=0.5%. +| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | IMIX_v4_1 diff --git a/tests/perf/10ge2p1x520-ethip4-ip4base-eth-4vhost-2vm-ndrpdrdisc.robot b/tests/perf/10ge2p1x520-ethip4-ip4base-eth-4vhost-2vm-ndrpdrdisc.robot new file mode 100644 index 0000000000..21e3c44ae9 --- /dev/null +++ b/tests/perf/10ge2p1x520-ethip4-ip4base-eth-4vhost-2vm-ndrpdrdisc.robot @@ -0,0 +1,566 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance.robot +| Library | resources.libraries.python.QemuUtils +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC +| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | BASE | VHOST | VM +| ... +| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model +| ... | L3 | Intel-X520-DA2 +| Suite Teardown | 3-node Performance Suite Teardown +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test with vhost and VM with dpdk-testpmd teardown +| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4 +| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} +| ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} +| ... +| Documentation | *RFC2544: Pkt throughput IPv4 test cases with vhost* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 +| ... | routing and static IPv4 /24 route entries. Qemu Guests are connected +| ... | to VPP via vhost-user interfaces. Guests are running DPDK testpmd +| ... | interconnecting vhost-user interfaces using 5 cores pinned to cpus 6-10 +| ... | and 11-15 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M +| ... | hugepages), 5 cores (1 main core and 4 cores dedicated for io), +| ... | forwarding mode is set to mac, rxd/txd=256, burst=64. DUT1, DUT2 are +| ... | tested with 2p10GE NIC X520 Niantic by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using either binary search or linear search +| ... | algorithms with configured starting rate and final step that determines +| ... | throughput measurement resolution. Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +#X520-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +#CPU settings +| ${system_cpus}= | ${1} +| ${vpp_cpus}= | ${5} +| ${vm_cpus}= | ${5} + +*** Test Cases *** +| tc01-64B-1t1c-ethip4-ip4base-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps. +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc02-64B-1t1c-ethip4-ip4base-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc03-1518B-1t1c-ethip4-ip4base-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps. +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc04-1518B-1t1c-ethip4-ip4base-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc05-IMIX-1t1c-ethip4-ip4base-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame \ +| | ... | size using binary search start at 10GE linerate, step 10kpps. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc06-IMIX-1t1c-ethip4-ip4base-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for IMIX_v4_1 frame \ +| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc07-64B-2t2c-ethip4-ip4base-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps. +| | [Tags] | 2T2C | MTHREAD | NDRDISC +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc08-64B-2t2c-ethip4-ip4base-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. +| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc09-1518B-2t2c-ethip4-ip4base-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps. +| | [Tags] | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc10-1518B-2t2c-ethip4-ip4base-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. +| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc11-IMIX-2t2c-ethip4-ip4base-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame \ +| | ... | size using binary search start at 10GE linerate, step 10kpps. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | [Tags] | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc12-IMIX-2t2c-ethip4-ip4base-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for IMIX_v4_1 frame \ +| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc13-64B-4t4c-ethip4-ip4base-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps. +| | [Tags] | 4T4C | MTHREAD | NDRDISC +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc14-64B-4t4c-ethip4-ip4base-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. +| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc15-1518B-4t4c-ethip4-ip4base-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 1518 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps. +| | [Tags] | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc16-1518B-4t4c-ethip4-ip4base-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 1518 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. +| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc17-IMIX-4t4c-ethip4-ip4base-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for IMIX_v4_1 frame \ +| | ... | size using binary search start at 10GE linerate, step 10kpps. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | [Tags] | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc18-IMIX-4t4c-ethip4-ip4base-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for IMIX_v4_1 frame \ +| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} |